Unable to set default message memory to mass memor...

Hi i bought n96 two weeks ago,yesterday i wanted to set mass merroy as default message memory. but it asking to copy all messages tonew memor...i said okthen it asked me to save original messages.. i pressed yes. then it says unable to move messages
.....i have formatted my phone once

Thanks guys for showing interest in helping.
As you guys can see, there's no adobe reader when u expand. Also, I already browsed the reader just in case too. Thus expanding doesnt help. =(
Also, I cant seem to find the "file type" tab in folder options

Similar Messages

Outlook 2013 (Office 365 Install) unable to set Default Mail Client

After installing Office 2013 via Office 365 for Business, the installation is unable to set Outlook as the default mail client. Message appears after each system reboot:
"Either there is no default mail client or the current mail client cannot fulfill the messaging request. Please run Microsoft Outlook and set it as the default mail client."
When going into Control Panel and manually set the Outlook client as the default, the setting does not take. After a reboot, the warning message reappears.
Anyone else having the same issue?

MJ
No but then again it is a Beta. Did you clean install or update? 9926 seems to be relatively stable.
Wanikiya and Dyami--Team Zigzag

Unable to set default program for .pdf

CURRENT PROBLEM:
As show in print screen, when i attempt to set default program nth happens at all. The only way i can open any .pdf file now is by 1st opening adobe reader 9 and select the .pdf file manually
INITIAL STAGE OF PROBLEM:
Problem started after upgrading to windows 7 from vista. Windows 7 is able to recognise adobe reader 8 as a valid default program since it is in windows.old. Thus the default for .pdf is adobe reader 8 (it was installed in vista).
Subsequently, installing adobe reader 9 isof no use as it will be ignored and windows 7 will only continue to use adobe reader 8 as the default reader when i try to open a .pdf file, unless if i manually opened adobe reader 9 and selected a .pdf file manaually
However, I am unable to uninstall adobe reader 8 as the "program and feature" can only identify adobe reader 9 and does not think that adobe reader 8 exists.
ATTEMPTs TO SOLVE:
Thus, I removed windows.old by using the disk cleanup. However, I am still unable to set adobe reader 9 as the default reader. Instead, .pdf are no longer accessible/"open-able" unless I 1st opened adobe reader 9 and then selected a .pdf manaually.
I've attempted reinstalling and restarting comps etc, they dun seem to help. I suspect the OS is now only able to recognise adobe reader 8 from windows.old as a valid program directory due to some registry issues since it was initally set as the default when i 1st upgraded the OS. Now that adobe reader 8 is removed, there might be some corrupted registry somewhere that needs to be set right again?
Really need help with this. Thanks a million.

Thanks guys for showing interest in helping.
As you guys can see, there's no adobe reader when u expand. Also, I already browsed the reader just in case too. Thus expanding doesnt help. =(
Also, I cant seem to find the "file type" tab in folder options

X6 setting default messaging application

Hey,
I am a brand new X6 user, I am not event very familiar with Symbian S60 OS. I recently purchased the application known as ThreadedSMS because I like to see my text messages threaded as in conversation form. After I installed it, the original messaging application still pops up notifications in addition to ThreadedSMS. Also when I click on a contact and wish to send a text message, it uses the original messaging application instead of Threaded SMS.
Is there a way to set the OS's default messaging application to be Threaded SMS so that I don't get double the notifications of incoming text messages, and so when I try to send a text message via contacts it doesnt pull up the original SMS application.
Also, does anyone know a more finger friendly Contact Manager application (similar to iPhone ) ??
Thanks,
JKDManoj

Hi, you can't change the default messaging app, and for managing contacts Ovi suite is the easiest way ! Sync at least once per week
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Unable to set default Model

Hi,
When i tried to set default Model for Web Input/Report forms i am unable to change the previous. Exp when i go and set A as my default model in features>context defaults it shows as default model ....... when i open input form it still has the model B.(i have also re-logged in to see the changes not shown though)
Please help
Thanks,
PR

Thanks guys for showing interest in helping.
As you guys can see, there's no adobe reader when u expand. Also, I already browsed the reader just in case too. Thus expanding doesnt help. =(
Also, I cant seem to find the "file type" tab in folder options

Unable to set default develop setting to specific camera

Hi Guys,
I like to change the default develop settings for my camera. It's done in the Develop module in Camera Calibation. While holding the Option key the tight button changes to Set Default...
After pressing the button nothing happens on one of my Mac's on the other it does work. Both settings in the Preference menu called "Make default specific to camera serial number" is cheked on both machines.
Any idea why it is not working on one machine?
Both are OSX 10.9 and Lightroom 5.4
Thanks!
Bart

Thanks guys for showing interest in helping.
As you guys can see, there's no adobe reader when u expand. Also, I already browsed the reader just in case too. Thus expanding doesnt help. =(
Also, I cant seem to find the "file type" tab in folder options

Unable to set default fonts n style in Cisco Jabber

Unlike CUPC or WebEx Connect, no option is currently available under File -> Options for both Cisco Jabber for Windows (On Prem or Cloud deployement) to configure and set default font/size/style for Jabber.

Got an update on this. This feature is targeted in future release where we'll allow end users to change the Outgoing Font Size n Style!!

Unable to set default compose mail font in Apple Mail

So, I've gone through all the preferences and set them to the correct font (Folio STD-Light). When I compose a new message it uses Folio STD-Medium. "Medium" is not set in any of my font preferences in the Mail > Preferences pane. Where is it pulling this font from? Is it in a hidden plist file somewhere?
The only way I can get the correct font, is to set it each time in the "fonts" button each time I write an email. That gets old quickly.
Any help?

If you are trying to determine the fonts seen by your recipients, there is no way to do that using Mail > Preferences. It must be done for each outgoing individually in the New Message pane. Or you can use custom stationery.
Of course it only makes sense to select a special font for your emails when you know for sure that the recipient also has it on their machine.
If the ability to set a default font to be seen by recipients is really important, I recommend switching to Entourage or Thunderbird.

Unable to set default

I am unable to open a document with adobe sent by email. I downloaded adobe for windows 7 and cannot set it as my default .

adobe opens and I get a window that says " open a recent file/ adobe online services. " . Since I have had this problem, I downloaded Foxit to open my documents, but I need to use Adobe, as that is the program that is needed to interact with these files
I want to make Adobe my default, not foxit.
I have tried to do so using the defalt programs settings but am unsuccessful

ICal setting default message alarm for all events

I want to change when I get message/alarms for all events (birthdays, etc.) from 2 days before to 4 days before. I find that I can only change this for single events (e.g., a specific person's birthday rather than all persons' birthdays). Is there a way to change the default so that I get my warning alarm message for all events 4 days in advance instead of 2 days?

I miss appointments b/c of this too.
And no, Apple does not read these forums UNLESS you comment on how pathetic and Mickey Mouse certain elements of their software is - like no 'default' setting for alarms in iCal, and not being able to resize windows from all edges (vs. the little annoying corner) etc etc.
I hope they fix it with the new software package in Leopard. I'm somewhat afraid it's going to be 'Leper' at first though. We'll see...

[Solved]Unable to set default browser

Using XFCE I can set the default browser from settings/Preferred Applications to either google chrome or firefox both of which are installed. I set chrome as preferred and can get online no problem. The setting will stay for sometimes days or maybe a few minutes before the system 'forgets' what preference has been set and reverts to no preference set.
Using thunderbird to open links in emails always opens Firefox despite the default browser being set to chrome. In fact firefox always stays set as default browser under preferences/general and I can have firefox and chrome open at the same time with both claiming they are the default browser. If I set the system preference to firefox then open chrome it detects it is not the default browser and allws me to set it as default, this always seems to set the system preferences to not set so it removes firefox but not not set chrome, if I then open firefox it does not give the message about not being the default but checking in preferences/general it is already set as default.
I seem to be going around in circles for the last few weeks, can someone point me in the right direction?
Last edited by weedfreak (2012-09-23 09:43:11)

Well I had also tried using XFCE Preferred application to set it and that also did not work, there was also an anomaly with the menu entry for Web Browser, it always claimed there was no preference set and I needed to select the session browser from the list.
The link provided was not really a lot of help directly, but it did point out that xdg-open is broken and gave me some directions to search in, eventually I found the ~/.local/applications/mimeapp.list contained a lot of references to firefox that stayed in place even if preferences were changed, they were listed before the chrome entries. I deleted every line with firefox in then when I tried a link from Thunderbird I was asked to choose a browser and the change stuck, the web browser menu link also works correctly.
Not sure if this is really solved or if it is a workaround but I'll mark it solved.

[SOLVED] Unable to set default application to open files

Hello,
Whenever I try to set a default application for a file type (an avi for example) by right-clicking the file in Nautilus and choosing Open with Other Application, I can select the application (in this case VLC), check the Remember this Application checkbox and click Open, I always get the below message:
Could not set application as the default: Can't create user application configuration folder /root/.local/share/applications: Permission denied
I'm not logged in as root (confirmed with "whoami") so I'm not sure why it's trying to access the root home folder.
I'm thinking this is simply a misconfigured path statement (forgive the Windows terminology) but I'm not sure where to start looking. Any help would be most appreciated.
Thanks!
Beta
Last edited by betawind (2010-07-09 00:10:58)

Thanks for the reply ngoonee!
The situation has already changed a bit. Still being in Windows mode, I decided to try a reboot. After rebooting I no longer get the error I was before (I wonder if it had something to do with logging in initially as root then su'ing to my user account) but the association with vlc just isn't sticking.
I noticed though that now when I right-click on a video file I get the option to "Open with Movie Player" as well as "Open with VLC media player" (which does do what it's supposed to), which wasn't there before. For grins I went and set the preferred multimedia app to VLC through System > Preferences > Preferred Applications, but that didn't help.
Is there a place these preferences are stored that I might take a peek at?
Last edited by betawind (2010-07-09 00:04:56)

Unable to set default date for Date Picker item using Auto Row Processing

Okay, I have searched through the forum for an answer, and have not found a thing to account for my problem.
First, does anyone know if using Auto Row Processing has problems updating an item/field in a record where the Source is defined as Database Column if the 'Display As' is defined as 'Date Picker (MM/DD/YYYY)'?
I ask this only because I found out the hard way that Auto Row Processing does NOT fetch the value for an item where the field is defined as TIMESTAMP in the database.
My problem is as follows: I have a form that will CREATE a new record, allowing the user to select dates from Date Pickers, text from Select Lists, and entering in text into a Textarea item. The information is saved using a standard (created through the Auto Row Processing wizared) CREATE page level button. After the record is created the user is able to go into it and update the information. At that time, or later, they will click on one of two buttons, 'ACCEPT' or 'DECLINE'. These are Item level buttons, which set the REQUEST value to 'APPLY' (Accept) and 'UPDATE' (Decline). The Accept button executes a Process that changes the Status Code from 'Initiated' to 'Accepted', and sets the Declined_Accepted_Date to SYSDATE, then another Process SAVEs the record. The Declined button runs a Process that changes the Status Code from 'Initiated' to 'Declined', and sets the Declined_Accepted_Date to SYSDATE, then another Process SAVEs the record.
However, even though the Status Code field is updated in the database record in both Accepted and Declined processing, the Declined_Accepted_Date field remains NULL in the database record (by looking at the records via SQL Developer). WHY??? I looked at the Session State values for both the Status Code and the Declined_Accepted_Date fields and saw that the fields (items) had the expected values after the process that SAVEs the record.
The following is the code from the Accept button Page Process Source/Process:
BEGIN
:P205_STATUS_CD := 'A';
:P205_REF_DECLINE_ACCEPT_DT := SYSDATE;
END;
As can be seen, the Status Code and Declined_Accepted_Date items are set one right after the other.
As an aside, just what is the difference between Temporary Session State vs Permanent Session State? And what is the sequence of events to differentiate the two?

Here's yet another thing that I just looked into, further information...
One other difference between the date field I am having problems with (Accepted_Declined_Date), and other dates (with Date Pickers) in the record is that the Accepted_Declined_Date never gets displayed until after it is set with a default date when the Accept and Decline buttons are pressed.
One of the other dates that works, the Received Date, is able to write a default date to the record that is never typed into the box or selected from the calendar. That date is placed into the box via a Post Calculation Computation in the Source, which I set up as: NVL(:P205_REF_RECEIVED_DT,TO_CHAR(SYSDATE,'MM/DD/YYYY'))
However, I do remember actually trying this also with the Accepted_Declined_Date, and setting the Post Calculation Computation did not work for the Accept_Decline_Date. Could this be because the Accept_Decline_Date is never rendered until the Status Code is set to Declined (in other words, there is no need to display the date and allow the user to change it until the record is actually declined)???
The control of the displaying (rendering) of the date is set via the Conditions / Condition Type: Value of Item in Expression 1 = Expression 2
Expression 1 = P205_STATUS_CD and Expression 2 = L
Does this shed any light???

Unable to set default table attributes in Keynote

I've been trying to change the default table attributes in one of my themes, and as per the description in the Keynote manual (page 237-8), this should be a straightforward process:
1) In the slide navigator, create a new slide.
2) If you're setting up default attributes for a particular master slide (rather than all the masters in the current theme), click Masters in the toolbar and choose the master slide. [I want to change the table attributes in all master slides in the particular theme, I skip this step.)
3) Place a table on the slide.
4) Select the table and set its attributes.
5) Do one of the following: To make the table the default for only the current master slide, choose Format>Advanced>Define Table for Current Master. To make the table the default for all masters slides in the current theme, choose Format>Advanced>Define Table for All Masters.
6) If you don't want the table on the slide, delete the table.
Step 1) through 4) is unproblematic, but the second I try to execute step 5), the new formatting is all mixed up, and I am left with a table that looks nothing like the one I have just created in step 4). (Choosing to make the new table layout valid only in the current master doesn't help.)
Any thoughts on how to sort this out would be greatly appreciated! I should mention that following a similar procedure for diagrams works like a dream.

Hi!
          We have same problem!
         The layout can be selected in application, but it is not taken as default.
     We appreciate your feedback
Best Regards.
Angelica

Unable to set default mail account in iOS

I'm unable to choose my default mail account. I have two IMAP mail accounts configured. One of the two accounts was imported using a configuration profile supplied by the mail service provider. This worked well, except that iOS doesn't seem to recognise it for the purpose of defining a default mail account. I added a third mail account and now the default account option is displayed in Settings, but the drop-down list only shows two accounts, not the one imported via the configuration profile. Is this a bug?

Resetting the phone does not delete anything from the phone. Explain what you mean by "reset." Are you asking or telling us you can't reinstall mail accounts. What EXACTLY did you do?

Unable to set default message memory to mass memor...

Similar Messages

Maybe you are looking for