Unable to set flags independently in Compare View in LR3

When I select a specific image in the compare view (LR3) and tag it as "Rejected" (hitting "x"). both images up for compare are being flagged as rejected. both the good and bad. Maybe my memory is not serving me correctly, but I thougt that in the prior versions of LR you could flag each image independently in the Compare view, that is flag one as "Rejected" and the other as a "Pick" ("p"). Now I am having to look at the images in Compare on one monitor and go over to my second one that is showing the Library and select the images to be rejected and hit "x" and then select the one that is a keeper and click "p". This seems to be rather counterintuitive and cumbersome. It seems a natural expectation to want to compare images side by side and then flag the one you want to keep and flag then independently flag the ones that are not keepers. Is what I am experiencing normal? Thanks in advance for any help.

Yes, it makes sense.  LR thinks that the Grid is on the primary monitor, which is why both images get flagged when you hit "p".
rgphotoman wrote:
John, I have some further input after doing some additional testing. Apparently, the inability to perform independent flagging in a Compare View somehow ties to the other monitor being set to Grid View. What I did was set one monitor to the Grid View and the other to Compare view for two images and then went to that view, selected one of the images, and then I hit the "p" key to flag the image. As expected both were flagged. Then I hit "u" to unflag them and went to the Grid view and changed it to Compare as well (i.e. both monitors were showing that view). Then I went to the other monitor that I was originally doing the compare and hit "p" and voila only one image flagged. I was then able to flag the other as Rejected as well. I then went to the other monitor and changed the view back to Grid and checked the results and indeed both images were properly marked. So it appears that this issue somehow relates to having the Grid view active. Does what I did make sense?

Similar Messages

  • Programati​cally set flags in a DIAdem View

    Is there a command to set flags for a 2D axis system in a view? I would like to automate the process of setting flags for a curve, copying the points, and creating a report with a graph of the copied data and a table of that data. I can do the report I just need to be able to set the flags prgramatically once the users sets the band cursors where he/she wants.
    Thanks,
    AJL

    Hi AJL,
    Currently it is not possible to set VIEW flags via script. But, if your customer has selected the band width you know all necessary parameters.
    View.ActiveSheet.Cursor.X1
    View.ActiveSheet.Cursor.X2
    With pno you can determine the row in a data channel with contents closest to a given value. Example:
    iRowStart = pno(NameOfXChannel, View.ActiveSheet.Cursor.X1)
    iRowStop = pno(NameOfXChannel, View.ActiveSheet.Cursor.X2)
    Then you can use DataBlCopy to copy the selected area.
    Greetings
    Walter

  • WVC80N software "unable to set up remote viewing" with TZO

    I've researched this all night and I'm now begging for help.
    I've got the camera all set up and I can view it while on the local network.  The problem comes in when I try to sign up for the 90-day free TZO trial that comes with the camera to try to get remote viewing on my iPhone.  I progress through the Linksys setup software (as is detailed here: http://www.tzo.com/MainPageSupport/HowToPage/LinksysHomeMonitoringNCameraTutorial.html) and between steps 7 and 8, I get a screen that says "Unable to set up remote viewing" with my network, click this link to learn how to remotely view your camera.  The link takes me to a page on the TZO site that says "Oops, there was an unknown error with setting up you camern for remote access" and nothing else.  It seems to die on the "Configuring Internet Server" step.
    Within the camera's setup page, there's a link to the TZO website that tells me that because I have a WVC80N, I have to use the setup CD to set up the 90-day free trial, which fails as described above.
    I've set the camera to have a fixed IP of 192.168.1.200
    I've set the Alternative Web Access Port to 1024
    In Port Range Forwarding in the router, I've set 1024 to 1024 to forward to 192.168.1.200 (not sure exactly what this does)
    The router is a WRT160N
    Any ideas?

    Have you tried getting in touch with TZO and set the DDNS up the old fashioned way?  I also know that TZO has a beta going on of a new IP camera application for remote viewing and this may also help.  Not sure why the setup is failing though, but oook is probably right, something wacky with the router, IP or ISP that the setup software just doesn't like.
    http://www.MyHomeServer.com
    Linksys IP camera reviews, Tutorials and How-To's on Web & Mobile Streaming

  • Unable to set kernel parameters using Reource Control

    HI,
    I'm trying to install DB2 8.2 on solaris 10.the problem i'm encountering in installation is unable to set MSGMAX and MSGMNB kernel parameters. I tried setting the new replacement parameter process.max-msq-qbytes through projects->Resource Control from the management console.but still uinable to set the parameters.
    Can anyone help me in setting the above kernel parameters.
    Its not possible to set it thru /etc/system.
    thanx
    guru

    I finally had some time to find the actual syntax for tuning process.max-msq-qbytes and process.max-msg-messages. prctl will change those paramaters for an existing process.
    As a proof of concept I changed process.max-msg-messages to a 64k. process 2221 is my shell.
    prctl -n process.max-msg-messages  -r -v 64k 2221
    bash-3.00# prctl 2221
    process: 2221: -csh
    NAME    PRIVILEGE       VALUE    FLAG   ACTION                       RECIPIENT
    process.max-port-events
            privileged      65.5K       -   deny                                 -
            system          2.15G     max   deny                                 -
    process.max-msg-messages
            privileged      64.0K       -   deny                                 -
            system          4.29G     max   deny                                 -
    process.max-msg-qbytes
            privileged      64.0KB      -   deny                                 -
            system          4.00GB    max   deny                                 -And now to make this persist across reboots...
    So long as I'm experimenting, I'll use projadd and add a new project which just includes me and not the rest of the users in the group staff.
    bash-3.00# projadd -p 115 -U testuser \
    -K "process.max-msg-messages=(priv,64K,deny)" \
    -K "process.max-msg-qbytes=(priv,64K,deny)" \
    user.me This creates the following /etc/project:
    (note the last line is all on one line in the real file minus the \.)
    placer% cat /etc/project
    system:0::::
    user.root:1::::
    noproject:2::::
    default:3::::
    group.staff:10::::
    user.me:115::testme::\
    process.max-msg-messages=(priv,64000,deny);process.max-msg-qbytes=(priv,65536,deny)After a reboot I checked the values by loging in under my user and running prctl.
    placer% prctl $$
    process: 419: -csh
    NAME    PRIVILEGE       VALUE    FLAG   ACTION                       RECIPIENT
    process.max-port-events
            privileged      65.5K       -   deny                                 -
            system          2.15G     max   deny                                 -
    process.max-msg-messages
            privileged      64.0K       -   deny                                 -
            system          4.29G     max   deny                                 -
    process.max-msg-qbytes
            privileged      64.0KB      -   deny                                 -
            system          4.00GB    max   deny                                 -
    process.max-sem-ops
            privileged        512       -   deny                                 -
            system          2.15G     max   deny                                 -
    ...Solaris 10 has different tunables and default values from 8 and 9. It's default tunables should be good for most applications per a given system's hardware. There are some great blog articles, and discussions on opensolaris.org and blogs.sun.com on tuning that explain the intent of tuning and why we shouldn't have to tune.
    Cheers,
    ~~sa

  • Unable to set mailbox forwarder within ECP using Internet Explorer

    We seem to have an issue that has developed where using Internet Explorer we are now unable to set a mailbox forwarder within the ECP.
    When we use Internet Explorer 11 the following is used to discover the issue:
    1. Under mailboxes select any recipient, click "mailbox features" > and under Mail Flow click "View details"
    2. Click "Enable forwarding" > "Browse" and then select and recipient you want to forward ail too.
    3. Once you click on "Ok" it will be observed that the field in IE is blank account to forward to is not there.
    We have tried rebooting the CAS already in case something was cached but this did not help resolve the issue.
    We have noticed that if you open the ECP and repeat the steps in Firefox or Chrome the issue is not there. This is happening on all our machines in the domain and says to me it is an IE issue rather than Exchange maybe.. Does anyone know what might be causing
    it?
    Our environment is Windows Server 2012 R2, Exchange 2013 CU6

    Hi,
    After installing update 3008923, some web application modal dialog boxes may not work correctly in Internet Explorer 11. Now there is an update to resolve this issue.
    For your reference:
    Some web application modal dialog boxes don't work correctly in Internet Explorer 11 after you install update 3008923
    https://support.microsoft.com/kb/3025390
    Hope this can be helpful to you.
    Best regards,
    If you have feedback for TechNet Subscriber Support, contact 
    [email protected]
    Amy Wang
    TechNet Community Support

  • 206 unable to set alert only for certain group

    Hi,
    is it a symbian unwanted feature that user is unable to set Nokia 206
    profile to alert for certain group (even though this kind of functionality is
    available on this phone)?
    To be more precise user is able to set profile to alert only for certain
    group but this setting has no effect (phone rebooted, groups recreated, etc. no effect)
    This feature has been available and workin in previous Nokia phones
    since last decace - is it a software quality issue or what.
    Best regards,
    Hez

    It is the Application Pool account making the query to retrieve the groups, so you would need to establish a trust from Domain B -> A.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Design View independent of Code View

    Hello,
    When selecting code in a split screen my design view jumps around assuming what I want to look at.  Can anyone share how to make these independent of each other?  Is it even possibile?
    For example if I focus on the bottom of the page and scroll up to the top of my code view section the design view will follow to the top of the page.  Sometimes I would just like to look at my code without the view following me around like my once neglected and now set free from the pound dog.
    Thanks!
    Phil

    Hi thanks for the quick response.  Operating in two different windows is not what I am shooting for.
    This is what you see in Dreamweaver split view (although typically more thought and design has been used in the interface.) Pretend that the grey bar and slightly reddish grey on the right are the scrollbars that act independently of each view in there respected view.  One scrollbar for the design view and one for the code view in a split set up.
    Source View
    <div>code</div>
    <div>code</div>
    <div>code</div>
    Design View
    Top Div
    Middle Div
    Bottom Div
    In the design view I focus the view on the bottom div, the scroll bar is all the way down in the design view.  I touch anything in my code view and it snaps the design view scroll bar back to the top and I am back to looking at the top of the design view.  Can I break this dependancy?  It seems that clicking in the code view refreshes the design view which is the source of frustration.
    Thanks again.
    Phil

  • 220: Unable to set NLS_LANGUAGE. Oracle Workflow Builder

    Hi All,
    When i am trying to login to OWF Builder its throwing error:
    220: Unable to set NLS_LANGUAGE.
    210: Oracle Error: ORA-00942: table or view does not exist
    .  SQL text: SELECT NLS_LANGUAGE FROM WF_LANGUAGES WHERE :l IN (NLS_LANGUAGE, CODE)I already referred:
    Problem with NLS_LANGUAGE
    *MOS tech note : 220:Unable To Set NLS_LANGUAGE Error In Workflow Builder [ID 728330.1]*
    and other related threads.
    All values in registry are correct as per DB NLS settings
    Here the strange thing is i am able to login with apps account its not giving this error and when i am trying to login with another custom db account its throwing error.
    I even granted select, insert, update privilege on WF_LANGUAGES view to custom db user still same issue.
    Any pointers on this issue is really appreciated.
    Many thanks in advance.
    regards,
    X A H E E R

    Hi helios,
    Many thanks for your input.
    Did you check note Error While Connecting To Database Using The Workflow Builder [ID 577905.1]? After you follow note 220:Unable To Set NLS_LANGUAGE Error In Workflow Builder [ID 728330.1] did you restart machine?yes, i restarted my PC and the tech note provides the same solution from tech note *577905.1* as i updated in my earlier post.
    If its the problem of NLS_LANG then it should not allow me login with apps also right??
    But i can login with apps without any issues.
    thanks,
    X A H E E R

  • [SOLVED] sudo: unable to set runas group vector: Invalid argument

    I recently made the (idiotic) mistake of overwriting my /etc/passwd and /etc/group files, although I managed to restore them from a backup.  Since restarting the machine I'm having the same issue every time I invoke sudo:
    sudo: unable to set runas group vector: Invalid argument
    I can't find any info on this error. Any ideas on where to start?
    Thanks,
    -- C. M.
    EDIT: I should also note that this is a headless machine that I'm accessing via SSH.
    Last edited by C. M. Harlequin (2014-06-15 10:35:33)

    Thanks for the reply, Amish.
    It's my understanding that the 'group vector' is a term that refers to the specific set of groups to which a user has membership, rather than a specific group named 'vector'.  Although, I could be mistaken.
    From the sudo manpage:
    The -P (preserve group vector) option causes sudo to preserve the user's group vector unaltered. By default, sudo will initialize the group vector to the list of groups the target user is in. The real and effective group IDs, however, are still set to match the target user.
    Similarly, from the sudoers manpage:
    By default, sudo will initialize the group vector to the list of groups the target user is in. When preserve_groups is set, the user's existing group vector is left unaltered. The real and effective group IDs, however, are still set to match the target user. This flag is off by default.
    But the manpages don't offer me much, I'm still clueless as to why I'm getting the error.
    EDIT: although using the -P flag seems to allow sudo to run without error
    Last edited by C. M. Harlequin (2014-06-14 18:42:39)

  • IMAP setting flags for DSN message problem

    Hi,
    I have a question about processing DSN flags using Java Mail.
    We are trying to set SEEN and FLAGGED flags also for DSN messages (for any other messages it is working perfectly fine).
    The problem is that no flags are set, no IMAP commands are issued.
    For any 'normal' messages the IMAP command is issued (for example: A27 STORE 13 +FLAGS (\Seen)).
    We are using Exchange Server 2007 with IMAP support enabled on the mailbox.
    The strange thing is that i can manualy set SEEN and FLAGGED flags from Outlook on this DSN message and then print flags for this message from Java Mail.
    Is there any standard for FLAG processing for DSN messages? Is this a problem in Java Mail / Exchange or some limitation? As I believe DSN in also a javax.mail.Message from the implementation point of view...
    Regards

    Hi Bill,
    This was a good point, about calling setFlags method on the wrong message.
    The problem is because, we are dealing with Exchange bug described here:
    BODYSTRUCTURE with "multipart" "signed" not parsing
    and using workaround described here:
    http://www.oracle.com/technetwork/java/faq-135477.html#imapserverbug
    However, we were setting flags on message created using following code
    SharedByteArrayInputStream bis =  new SharedByteArrayInputStream(bos.toByteArray());
    MimeMessage cmsg = new MimeMessage(session, bis);not on original message from the mailbox.
    Regards

  • Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels.  Such problems n

    Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels.  Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer.  I have a pretty simple system with only a few plug-ins, which are usually not in operation.  I have 12GB of RAM in my Windows 7 PC.  I could illustrate these problems with screen shots if you would tell me how to submit screen shots.  Otherwise I will try to describe the problems in words.
    The problem is clearly cumulative, growing worse as usage time passes.  Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond.   In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces  (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
    To experiment I created a new catalog of 1100 images.  After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size  images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
    I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data.  (I have a screen shot to show this.)  CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
    Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong.  I could also send screen shots of this data.
    At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR.  This is not normal.  I hope you can find the cause, and then the solution.  If you would like to see my screen shots, tell me how to submit them.
    Ollie
    [email protected]

    Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels.  Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer.  I have a pretty simple system with only a few plug-ins, which are usually not in operation.  I have 12GB of RAM in my Windows 7 PC.  I could illustrate these problems with screen shots if you would tell me how to submit screen shots.  Otherwise I will try to describe the problems in words.
    The problem is clearly cumulative, growing worse as usage time passes.  Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond.   In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces  (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
    To experiment I created a new catalog of 1100 images.  After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size  images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
    I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data.  (I have a screen shot to show this.)  CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
    Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong.  I could also send screen shots of this data.
    At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR.  This is not normal.  I hope you can find the cause, and then the solution.  If you would like to see my screen shots, tell me how to submit them.
    Ollie
    [email protected]

  • Unable to  set some dates  in Adobe bridge cs2

    HI ALL
    Our keywording team using  the  Adobe bridge CS2.
    Kindly  hep me to understand Why  some dates  Like
    1/1/1970
    1/1/1642
    1/1/1890
    etc  .....
    I unable to  set in  ITPC image Tab  information .............
    Lakhan

    Hi
    Thanks for revert ......
    I  tried   with  CS2 & CS3  but only  specific  dates like (1/1/1970) i above  mentioned  is still  not   reflecting in IPTC image  info   ........
    Please suggest....

  • Illustrator won't run: "unable to set maximum number of files to be opened"

    I have an intel macbook pro (core duo with 2GB ram) and a copy of purchased adobe creative suite 2. Other applications in the suite like photoshop, acrobat, etc can run on my mac without any problem. But when I try to run illustrator, it just shows an error message "Unable to set maximum number of files to be opened" and quits. I also installed a trial version of illustrator cs3 and got the same problem. Can anyone help? Thanks.
    CC

    Hi, I realize this is an old thread but it was unanswered and the issue has come up again in a newer thread:
    http://forums.adobe.com/message/2534652
    If the original poster sees this, can you reply tin the new thread and let us know if you were ever to solve this problem?
    Thanks!

  • Service Desk Unable to set status to Customer Action and Proposed Solution

    Hi Everyone,
    We are unable to set a service desk issue to the status Customer Action or Proposed solution.
    I have someone create a new issue in the bakend system and when I receive the issue I assign it to myself as the processor. When I try to set teh status to Customer action it is grayed out.
    I have checked the following:
    1. As a test I assigned My user with sap_all profile so does not appear to be authroisation related
    2. The status profile has all six standard values (New, customer action, In Process, Sent to SAP, Proposed Solution, Confirmed).
    3. The transaction types have been defined using the standard profiles for Text Det. Procedure, Partnet Determination Procedure, Status Profile. The Partner Function ORG is set to Sold-To-Party , The date profile is a SRV_SLA_ITEM and the Action profile is set to SLFN0001_ADVANCED. The Org Data Prof is set to a customer defined one: ZSSC000000001.
    4. I have checked transaction ppoma_crm and the org structure and my user is assigned to a team lead position.
    Your assistance is greatly appreciated.
    Michael

    Hi Michael,
    please check your status profile for the "lowest status no." and "highest status no." values of the status values as Alex mentioned!
    You can find this in SPRO under "SAP Solution Manager> Scenario-Specific Settings>Service Desk>Service Desk>Status Profile".
    If the "high" value of the status "New" is lower than the status number of status "Customer Action" than you can not set the message from "New" to "Customer Action"!
    Hope this helps,
    Christoph

  • Unable to set the selected value for a ADF LOV

    Hi,
    I am developing an application using jdeveloper 10.1.3 and Struts.
    I have created a ADF LOV on my JSP Page as given below:
    <html:select property="lob" onchange="javascript:selectLOB(this.form)">
    <html:optionsCollection label="prompt" value="index" property="lob.displayData"/>
    </html:select>
    When i submit the form, i am able to get the value of the selected Value in the List.
    JUCtrlListBinding listBinding = (JUCtrlListBinding) formBean.get("Lob");
    Row r = (Row) listBinding.getSelectedValue();
    String SoLob = (String) r.getAttribute("LobLob");
    But i am unable to set the selected value back in the list when i return to the form again.
    I tried the following:
    int x = listBinding.getSelectedIndex();
    listBinding.setSelectedIndex(x);
    It would be really helpful if some one could let me know what needs to be done.
    Thanks,
    Subashini

    Gyan,
    I tried with the code you suggest , its trying to set the value of a field, but my requirement is to change the property for
    "Rendered" on the field so that based on search parameters we can hide result table column.
    After searching online, I modified the controller code as follows
    1.Created a new transient attribute (Testrender) with type "Boolean" and always updateable.
    2.changed the "Rendered" property value on the field I want to hide as ${oa.PoSearchVO1.Testrender}.
    3. Modified the controller code as follows :
            OAApplicationModule am = pageContext.getApplicationModule(webBean);
            OAViewObject testvo = (OAViewObject)am.findViewObject("PoSearchVO1");
            OADBTransaction txn = am.getOADBTransaction();
            if (testvo != null)
              OARow row = (OARow)testvo.first();
                if (a.equalsIgnoreCase("Approved"))
                     row.setAttribute("Testrender", Boolean.FALSE);
                else
                     row.setAttribute("Testrender", Boolean.TRUE);
            } But now when i run the page and populate the search field and click "Go" its hiding the field but throwing the following error and the search results are also bad.
    Its using only the value of one search parameter but not the second one .
    The search cannot be executed because the table has pending changes that would be lost. I think the vo is getting dirty when I update the transient attribute value. So I used txn.rollback ,then search is working fine but its not hiding the field.
    So can you please let me know how to proceed from here ?

Maybe you are looking for