Unable to set fontFamily property in Business Graphics UI Element?
Dear All,
I was trying to set the fontFamily property of BusinessGraphics(BG) UI Element. After setting the fontFamily property for BG UI Element, this property is not getting reflected in the chart in Portal but it is reflected under Chart designer. Is there something which is overwriting the user defined setting for fontFamily? and I am not using any URL for IGS.
On the other other UI Element properties like ChartType and dimention are reflected in both Chart Designer and Portal.
Please respond at ur earliest.
Thanks in advance.
Regards,
Nittin
Edited by: Nittin Garg on Jun 18, 2008 11:33 AM
Dear Kai,
Thanks a lot for your response.
1. According to your suggestion (note 531668), it has been found that XMLCHART is already installed on our Integrated IGS server.
2. According to note 1028690, it has been found that "IGS 6.40 with patch level 19 or higher" should be available, but in our case we have "IGS 6.40 with patch level 16". Now what I would like to inquire is that does upgradation have any side effects on server?
For your information I would like to clear you that I want to use Vrinda font (its a standard font), but at present font shown in the chart is Arial.
Do we need to install some other Interpreter (eg. GFWCHART)? or some thing else is required to show the desired standard font?
Regards,
Nittin
Similar Messages
-
Customizing Property of Business Graphics UI Element
Hello Web DynPro Developers,
I'm trying to implement a dynamicly created Business Graphic. In order to set the properties for the "Series" (which will normaly be set through the Chart Designer) i try to deliver a XML Customizing File with the customizing properties.
The API Documentation says that this property requieres a URL which points to a valid XML file.
After setting the Customizing property to a URL with an XML Configuration, the J2EE Engine does not try to retrieve the XML document (traffic watch).
Is this a not implemented feature? How to set the configuration of Business Graphic dynamically?Dear Kai,
Thanks a lot for your response.
1. According to your suggestion (note 531668), it has been found that XMLCHART is already installed on our Integrated IGS server.
2. According to note 1028690, it has been found that "IGS 6.40 with patch level 19 or higher" should be available, but in our case we have "IGS 6.40 with patch level 16". Now what I would like to inquire is that does upgradation have any side effects on server?
For your information I would like to clear you that I want to use Vrinda font (its a standard font), but at present font shown in the chart is Arial.
Do we need to install some other Interpreter (eg. GFWCHART)? or some thing else is required to show the desired standard font?
Regards,
Nittin -
Business Graphic UI Element - Major Ticks Property
Dear All,
We have a requirement to modify the existing Business Graphic UI element (Line Graph).
We are not able to increase the major ticks property of Business Graphic UI element to 21.
Are there any constraints on this property ?
Thanks.Hi,
Do you mean the properties of the ValueAxis-Line, Number = 21 and Major tick calculation = Manual ticks?
I do not see a restriction. Everything works fine.
Make sure to use the latest IGS!
Regards, Kai -
How to set multiple categories in Business graphics
Hi Experts,
I want to display column chart in using Business graphics UI element. My requirement is that I need to display sets of 5 series in 4 categories. I could able to create only one category and i am not getting option to create other 3 categories.
please help me how can i achieve this. Any kind of help would be much appreciated.
Thanks
UdayThanks Maksim,
I am still confused with other terms i mentioned in the code
http://wiki.sdn.sap.com/wiki/display/WDJava/WebDynproDynamicBusiness+Graphics
what does this nodeNumber refers to
what does this * IT_FinalElement * refers to
what does this * seriseNumber* refers to
there are so many questions? looks like in the above tutorial, the person has used SeriesList instead of SimpleSeries
I am totally lost. please help with any tutorial links for each scenarios
Thanks
Uday -
Unable to set configured property
Hi,
I am getting this following error during my server start up
**** Error Unable to set configured property "/atg/
dynamo/servlet/dafpipeline/AccessControlServlet.accessControllers" atg.nucleus.ConfigurationException
Please help me out.
Thanks in advance,
Jkdid u add ur own accessControlles ?
It might not have been defined properly.
follow the below link -
http://docs.oracle.com/cd/E23507_01/Platform.20073/ATGPersProgGuide/html/s0508configuringtheaccesscontrolservl01.html -
Unable to set configured property "/Initial.initialServices"
Hi All,
I am getting following error-
05:21:52,006 INFO [STDOUT] Unable to set configured property "/Initial.initialServices" atg.nucleus.ConfigurationException: Unable to resolve component /com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet
05:21:52,013 INFO [STDOUT] **** Error
05:21:52,064 INFO [STDOUT] Unable to set configured property "/Initial.initialServices" atg.nucleus.ConfigurationException: Unable to resolve component /com/progiweb/fbconnect/pipeline/FacebookProfileRequestServlet
I have checked the config path of both components and the structure of servlet is as below-
src/com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet.java and src/com/progiweb/fbconnect/pipeline/FacebookProfileRequestServlet.java.java
And for the properties files I have created them under the path- config/atg/dynamo/servlet/dafpipeline and config/atg/dynamo/servlet/pipeline
Inside these I am keeping the FacebookAuthStatusServlet.properties and FacebookProfileRequestServlet.properties files
The path of Initial.properties is as below- config/atg/dynamo/servlet/Initial.properties
The content of Initial.properties is -
initialServices+=\
/atg/dynamo/servlet/dafpipeline/FacebookAuthStatusServlet,\
/atg/dynamo/servlet/dafpipeline/FacebookProfileRequestServlet
Should I need to keep the both pipeline- dafpipeline and pipeline or only one of them?
And my pipeline structure is correct or not?
How to resolve the above error?
Please help regarding this!
Regards,
PrateekThe content of config/atg/dynamo/servlet/dafpipeline/FacebookAuthStatusServlet.properties is as below-
$class=com.progiweb.fbconnect.pipeline.FacebookAuthStatusServlet
$scope=global
serviceInfo=This servlet handle facebook redirection if it's a new user.
insertAfterServlet=/atg/dynamo/servlet/dafpipeline/FacebookProfileRequestServlet
redirect=true
redirectURI=register.jsp
profileUpdater=/fbconnect/userprofiling/FacebookProfileUpdater
loggingDebug=false
And the content of config/atg/dynamo/servlet/pipeline/FacebookAuthStatusServlet.properties is as below-
$class=com.progiweb.fbconnect.pipeline.FacebookAuthStatusServlet
$scope=global
serviceInfo=This servlet handle facebook redirection if it's a new user.
insertAfterServlet=/atg/dynamo/servlet/pipeline/FacebookProfileRequestServlet
redirect=true
redirectURI=register.jsp
profileUpdater=/fbconnect/userprofiling/FacebookProfileUpdater
bypassExtensions=.css,.gif,.jpg,.swf
loggingDebug=false
I think this will clear the confusion.
Regards,
Prateek -
Setting series color in the Business Graphics UI element
Hi all,
I'm using the Business Graphics UI element in my Web Dynpro application.
I set the color for various properties using chart designer, then I add the generated XML in the doModifyView method: bg.setDirectCustomizing(xml file) and most of it works.
However, when I change the series' color, I don't see any change in the xml file (see snapshot).
http://img90.imageshack.us/my.php?image=graphjy1.jpg
My xml starts with <SAPChartCustomizing> and ends with </SAPChartCustomizing>.
How can I set the series' color using the custom xml file?
Thanks,
OmriHi,
as the connection between your data and the customizing settings works via IDs you have to make sure that you set exactly the same ID for a data series as defined in the chart designer.
In case that you use point customizing make sure that you do not set an ID for the points of your series. Instead set the series customizing ID for the series only! Keep in mind that point customizing always overwrites series customizing if both are defined.
Regards, Kai -
Business Graphics UI element Column Width
Hi Experts,
I am using business graphics UI element in my Web Dynpro application to display the chart in columns .
I am able to display the chart properly based on the node data.
But the issue that I am facing is that when the node data is less, the column in the chart is getting expanded(column width is increased) as I am not able to set the width of the column dynamically based on the node size.
The column width keeps on changing based on the node size.
Is there any possible way to set the column width dynamically or fix the column width irrespective of the node size?
Best Regards,
AnuragHi Guys,
Is there any update on this?
Best Regards,
Anurag -
How to use series in business graphic ui element
Hi All,
How to use the series in business graphic ui element? my requirement is i have to display the sales in selected months in graph(these values dont know at design time).
Regards
SrikanthHi,
Use the dynamic node and bind this node to the BG source node and series nodes.
Create a node and bind this node to the BG source and the value that you want to shown in series has to be bound to that attribute of the node and similarly with the category.
Check out for the dynamic node creation and bind this node to the BG.
Regards,
Lekha. -
Hi,
Please can you tell,
How to work with Business Graphics UI Element with Brief steps
Regards,
Boots.Hi,
Refer pdf at https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/3261cd90-0201-0010-268c-d8d72e358af6
http://help.sap.com/saphelp_nw04/helpdata/en/e5/08b6eb35637a44830b9e6df22987aa/frameset.htm (SAP Library)
Kind Regards,
Nitin
Edited by: Nitin Jain on Feb 18, 2009 12:09 PM -
Business Graphics UI element Time_Scatter
Hi,
Can anybody provide a example for implementing Business Graphics UI element of chart type time_Scatter.
Regards,
VaibhavHi VaiBhav,
Please go through these links,
http://help.sap.com/saphelp_nw04s/helpdata/en/ed/258841a79f1609e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/18/d4d43fb9490c65e10000000a114b1d/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/a8/1cd93f5e0f9015e10000000a155106/frameset.htm
/people/perumal.kanthan/blog/2005/04/07/business-graphics-real-time-scenariospart-ii
Regards,
Ramganesan K. -
Business Graphic show elements sorted
Hi ,
i use a business graphic UI Element to display some results.
Categorie -String (Projectname)
1 Serie -Integer (Changelists sum)
How could i show these elements sorted on diagram? I have sorted the elements by using the function node.sort(Comparator), but the Business Graphic UI Element seems not to match it.
my Comparator class:
private static final Comparator DEFAULT = new Comparator(){
public int compare(Object o1, Object o2) {
if (o1 == null && o2 == null)
return 0;
if (o1 == null)
return -1;
if (o2 == null)
return +1;
IPrivateBusinessGraphics.ICategoriesPieChartElement
o1_new =(IPrivateBusinessGraphics.ICategoriesPieChartElement)o1;
IPrivateBusinessGraphics.ICategoriesPieChartElement o2_new=(IPrivateBusinessGraphics.ICategoriesPieChartElement)o2;
if(o1_new.getChangeListsSum()>o2_new.getChangeListsSum()){
return 1;
else if(o1_new.getChangeListsSum()<o2_new.getChangeListsSum()){
return -1;
else{
return 0;
Could you help please to solve this problem?
Thank you in advance!
Best Regards,
Dariause the following steps...
1. open that chart editor using Edit Customizing Option.
2. from the Overview select Series node. Right click on it and Add Series.
3. Series1 will be added. now select Series1 and in the below section go to Area Properties node.
4. expand it and choose the color you want for the first series.
5. similarly add Series2 with teh desired color.
6. then go to the view designer after saving the required changes.
7. go to the properties of simpleseries1 and in customizingID field write 'Series1'.
8. similarly fill other simpleseries also with the respective values.
save it
activate and its done.
thanks
sarbjeet singh
Edited by: sarbjeet singh on Apr 28, 2011 3:58 PM -
Hi,
In my .jnlp file I'm trying to set a system property in the resources section, via:
<property name="jnlp.aname" value="avalue" />
and in my code I am using
System.out.println(System.getProperty("jnlp.aname"))
and I am only getting 'null' for output.
I'm using 1.0.1_02, which I see specifies that properties must begin with 'jnlp' or 'javaws' (I've tried both), even though my application is signed. I'm running on W2K.
Any idea what may be wrong?
Thanks,
BethIf you app is unsigned, you should be able to set properties beginning with jnlp. as you stated, and
if signed, you should be able to set any property. Can you post you complete jnlp file so I can see
what might be wrong, or send it in to the feedback alias at [email protected] -
Unable to use DIMLIST property in business rules
Hi Team,
We have updated Account dimension with TYPELIM(10), DIMLIST(20) properties and in AUTOMATIC ADJUSTMENT DETAILS in the SOURCE ACCT when we update it with valid account ID or TYPELIM property value, it validates sucessfully.But, when we update it with Valid DIMLIST property value, it throws an error <Property Value> value does not exists in ID,TYPELIM of Account dimension. We are able to see the DIMLIST property values in the list of available options.
We are unable to use the DIMLIST property in other business rules and for FLOW dimension also.
Server Details : BPC MS 7.0 SP3 patch level 2
Appreciate if you can give your inputs on this.Please let me know if I need to provide any other information.
KranthiHi Kranthi,
Based on my observation the source account column specification in the Automatic Adjustment Details business rule allows only to specify a member of either account id or TYPELIM property from account dimension. Other properties not available for the selection.
Hope this helps.
Regards,
Badrish -
Unable to set EnableAttachments property to true on Posts list in Blog web.
Hello!
In my dev environment I've implemented blog site (using the Blog Template) as a sub web of Team Site. Using this approach
I was able to manage and display blog post attachments. But when I'm trying to do the same things on production, the approach doesn't work (error in new/edit form's javascript: object expected). During investigation with SharePoint Manager I found out that
in my dev env EnableAttachments property in the Posts list is set to true (by default), but in the production it is set to false. The trouble is that I'm not able to change the value to true even via object model. I'm using Search Server Express edition.
Thanks in advanceCheck this
http://garnetsgems.blogspot.in/2010/02/displaying-attachments-to-sharepoint.html
Thank you for the post! But unfortunately it seems to be not helpful. The post says how to display the Attachments field in data view. I've already implemented that. My trouble is that there is no Attachments field in the list. If I open Posts list as regular
list view and select an item via checkbox, the Attach File ribbon button is grayed. Looks like the attachments functionality is not available at all in the list. I've checked the EnableAttachments property of the list and it is false. I've tried to change
it via power shell and c# but no luck:
SPList list = web.Lists["Posts"];
list.EnableAttachmens = true;
list.Update();
The above code doesn't work. Changes are ignored.
Maybe you are looking for
-
Error while consuming secured portlets
Hi, We have the following usecase: - Producer - One taskflow which is given to anonymous role. Converted this task-flow to a portlet. - Consumer - We need to consume this portlet in another ADF application which is unsecured. Steps done: 1) Created a
-
Hi, I recently installed Dreamweaver CS4 on my Vista Business 32bit. By default xml files are associated to open with Dreamweaver, however the icon that is being displayed for the xml files is a blank paper icon. All the other files like .css, .js et
-
Youtube audio keeps playing after I hit back button.
Hi, I've been having this issue on youtube when I hit the back button the audio from the video keeps playing, I've also noticed that it only seems to happen when the comment section gets stuck loading which is frequent even though I have a fast inter
-
How to include waitcursor on some event
hi all, I want to show waitcursor on button click. how to do that. thanks for help...
-
Auto batch determination at the time of picking by transfer order
Hello, Our problem is, at the time of creation of transfer order with reference to delivery, system can not pick up the batches automatically as per the SLED. We have to manually enter the batches as per the SLED. Could you please guide me step by st