Unable to set group acl
I am trying to import a 3.0.6 content area into a 3.0.6 portal
schema. When I run contimp it imports the rows for the tables
correctly. When it tries to merge I receive errors such as
Unable to set group acl for: INTRANET/36/22025/FOLDER many times
with the 22025 number changing. INTRANET is the name of the
schema which I am importing the content area from.
In the portal site the new content area name is present but
there are no options for edit, properties etc and when I try to
access the content area I receive Error 30502: The folder ID
does not exist.
Thanks for any help.
Hi
I took an export of my 3.0.6 content area using contexp. I then
upgraded this portal schema to 3.0.9 which did not go
correctly. The folders and content area is there but I cannot
access the pages. I receive a 'Page not found' error. I am
therefore trying to import the 3.0.6 export into another 3.0.6
schema using contimp.
Thanks for your help.
Similar Messages
-
Please Help, I deleted an account that was the same name as the administrator but was not the administrator. Also a samsung galaxy s phone was charging through the usb port.
I closed out a program and got a message that the temp file could not be stored/saved.
Then a Kernel panic message occurred and restart was necessary.
The restart resulted in the screen with the apple logo and a continous swirl for 6+hrs,
Attempted Safe Mode start up, unsuccessful,
Single User Mode-sucess.
Ran $ fsck_hfs -rfd /dev/disk0s2 Ran several times repairs made with one which remained. something about a node.
No change in start up attempts
Started with install CD matching current OS 10.6
Ran Disk Utility Repair Permissions resulting in multiple errors:
One line/error
Warning: SUID file /////Ardagent has been modified and will not be repaired
144 lines/errors of this type of series of lines
Group permissions differ on...should be drwxr-xr-x, they are -rw-r--r-- .
permissions differ on...should be drwxr-xr-x, they are -rw-r--r-- .
unable to set owner and group...error 22: Invalid Argument
unable to set permissions on...error 22: Invalid Argument
Ran Repair Disk, result:
Error: Could not unmount disk (in red)
Ran Verify Disk, result:
The volume HD appears to be ok (in green)
Next I attempted to erase the dist to start from scratch since I have data backed up on time machine.
Error message box
Volume Erase failed
Volume Erase failed with error:
Could not unmount disk
I am looking to solve without buying DiskWarrior unless only resort.So it looks like solved it for now I will update later. What I did was after starting from the install cd for the 10.6 system I ran from terminal ran:
diskutil disablejournaling /dev/disk0s2
diskutil disableownership /dev/disk0s2
diskutil repairPermissions /dev/disk0s2
then i closed terminal and then when to disk utility and chose to repair disk with results all was fine. Then ran repair permissions and got similar results from terminal function next I erased disk and then chose to restore from time machine and it is now restoring! yea! -
206 unable to set alert only for certain group
Hi,
is it a symbian unwanted feature that user is unable to set Nokia 206
profile to alert for certain group (even though this kind of functionality is
available on this phone)?
To be more precise user is able to set profile to alert only for certain
group but this setting has no effect (phone rebooted, groups recreated, etc. no effect)
This feature has been available and workin in previous Nokia phones
since last decace - is it a software quality issue or what.
Best regards,
HezIt is the Application Pool account making the query to retrieve the groups, so you would need to establish a trust from Domain B -> A.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Warning! task_eval_init(): unable to set User/Group baseDN
Hi,
I have installed Directory server on Unix platform.
Installation went successful. While doing the installation, I have given the userid to run the server as "admxxx" and group as "www".
After the installation, the server started properly but with a warning message that "warning: daemon is running as super-user". And I was able to open the console and do whatever I wanted.
We have created 3 more directory server instances and we imported an LDIF file into one of the instances successfully.
Now the problem is, whenever we start the admin server, we are getting the following message.
bash-2.03# ./start-admin
Info: Cache expiration set to 600 seconds
Warning! task_eval_init(): unable to set User/Group baseDN
Netscape-Administrator/4.2 B2002.057.2313
startup: listening to http://servername, port 6061 as root
warning: daemon is running as super-user
Can any one tell why I am getting the message Warning! task_eval_init(): unable to set User/Group baseDN ?
This is very urgent. We have configured this LDAP to SiteMinder server.
Thanks in Advance,
Murthyzhangping,
I don't recognize your error. But are you using ldap for logging into SunMC ? This is not possible. -
[SOLVED] sudo: unable to set runas group vector: Invalid argument
I recently made the (idiotic) mistake of overwriting my /etc/passwd and /etc/group files, although I managed to restore them from a backup. Since restarting the machine I'm having the same issue every time I invoke sudo:
sudo: unable to set runas group vector: Invalid argument
I can't find any info on this error. Any ideas on where to start?
Thanks,
-- C. M.
EDIT: I should also note that this is a headless machine that I'm accessing via SSH.
Last edited by C. M. Harlequin (2014-06-15 10:35:33)Thanks for the reply, Amish.
It's my understanding that the 'group vector' is a term that refers to the specific set of groups to which a user has membership, rather than a specific group named 'vector'. Although, I could be mistaken.
From the sudo manpage:
The -P (preserve group vector) option causes sudo to preserve the user's group vector unaltered. By default, sudo will initialize the group vector to the list of groups the target user is in. The real and effective group IDs, however, are still set to match the target user.
Similarly, from the sudoers manpage:
By default, sudo will initialize the group vector to the list of groups the target user is in. When preserve_groups is set, the user's existing group vector is left unaltered. The real and effective group IDs, however, are still set to match the target user. This flag is off by default.
But the manpages don't offer me much, I'm still clueless as to why I'm getting the error.
EDIT: although using the -P flag seems to allow sudo to run without error
Last edited by C. M. Harlequin (2014-06-14 18:42:39) -
FSL-02007 Unable to set access rights of saploc.
Hello,
I am performing an installation of SAP ERP 6.0 EHP4 on Windows 2008 Server R2 along with MS SQL Server 2005 SP3 on a High Availability cluster.
I have completed the MS SQL Server 2005 into the first Cluster of MSCS. Performed the moving the MSCS groups of database, SAP and Cluster groups with success.
I created a shared file: sapmnt under the directory: E:\usr\sap for Everyone, & administrator with full access. The shared file was created as
SAPCLUSTER\sapmnt.
Then I started to execute the installation of Central Services Instance for ABAP (ASCS).
I logged as DECORCENTER.administrator, executed the command sapinst SAPINST_USE_HOST=DECORSAP
The installation has stopped after an error:
WARNING[E] 2010-10-25 16:59:51.285 [synxcfsexp.cpp:158]
CSyFSExportImpl::setACL(acl)
FSL-02007 Unable to set access rights of saploc. SetNamedSecurityInfo: This shared resource does not exist.
Physical hostname of cluster is: SRVSAP01 y SRVSAP02
The cluster has three group resources:
ClusterGroup -> hostname: CLUSTERGROUP
ClusterSAP -> hostname:CLUSTERSAP
ClusterDB -> hostname: DECCENSAP
VIRTUAL SERVER -> hostname: DECORSAP
Let me know what I am doing wrong with this
Regards,
Rodolfo
Edited by: Rodolfo Neuhaus Wiese on Oct 25, 2010 7:26 PMIvan Bronner wrote:
Hi
>
> We tried the installation already with or without sapinst SAPINST_USE_HOSTNAME= "virtual hostname".
>
> Ivan
Hi,
Could you try to create "saploc" share manually and set share permissions to "Administrators, sap_localadmin" group, with full access? If you tried this before, did you face with a problem?
You should perform this activity with the same user that you've executed SAPINST
Best regards,
Orkun Gedik
Edited by: Orkun Gedik on Aug 24, 2011 11:33 AM -
Unable to set kernel parameters using Reource Control
HI,
I'm trying to install DB2 8.2 on solaris 10.the problem i'm encountering in installation is unable to set MSGMAX and MSGMNB kernel parameters. I tried setting the new replacement parameter process.max-msq-qbytes through projects->Resource Control from the management console.but still uinable to set the parameters.
Can anyone help me in setting the above kernel parameters.
Its not possible to set it thru /etc/system.
thanx
guruI finally had some time to find the actual syntax for tuning process.max-msq-qbytes and process.max-msg-messages. prctl will change those paramaters for an existing process.
As a proof of concept I changed process.max-msg-messages to a 64k. process 2221 is my shell.
prctl -n process.max-msg-messages -r -v 64k 2221
bash-3.00# prctl 2221
process: 2221: -csh
NAME PRIVILEGE VALUE FLAG ACTION RECIPIENT
process.max-port-events
privileged 65.5K - deny -
system 2.15G max deny -
process.max-msg-messages
privileged 64.0K - deny -
system 4.29G max deny -
process.max-msg-qbytes
privileged 64.0KB - deny -
system 4.00GB max deny -And now to make this persist across reboots...
So long as I'm experimenting, I'll use projadd and add a new project which just includes me and not the rest of the users in the group staff.
bash-3.00# projadd -p 115 -U testuser \
-K "process.max-msg-messages=(priv,64K,deny)" \
-K "process.max-msg-qbytes=(priv,64K,deny)" \
user.me This creates the following /etc/project:
(note the last line is all on one line in the real file minus the \.)
placer% cat /etc/project
system:0::::
user.root:1::::
noproject:2::::
default:3::::
group.staff:10::::
user.me:115::testme::\
process.max-msg-messages=(priv,64000,deny);process.max-msg-qbytes=(priv,65536,deny)After a reboot I checked the values by loging in under my user and running prctl.
placer% prctl $$
process: 419: -csh
NAME PRIVILEGE VALUE FLAG ACTION RECIPIENT
process.max-port-events
privileged 65.5K - deny -
system 2.15G max deny -
process.max-msg-messages
privileged 64.0K - deny -
system 4.29G max deny -
process.max-msg-qbytes
privileged 64.0KB - deny -
system 4.00GB max deny -
process.max-sem-ops
privileged 512 - deny -
system 2.15G max deny -
...Solaris 10 has different tunables and default values from 8 and 9. It's default tunables should be good for most applications per a given system's hardware. There are some great blog articles, and discussions on opensolaris.org and blogs.sun.com on tuning that explain the intent of tuning and why we shouldn't have to tune.
Cheers,
~~sa -
[CUPS] Unable to set my new CUPS server with an HP printer (solved)
Hello,
I come from Gentoo and I just installed my new Arch Linux server on a notebook with 2 NIC ... Now, I'm trying to set the CUPS deamon to share printer (HP DESKJET 895Cxi) for 3 workstations in my LAN. Before, it was working (printer and linux ... has never been very good...). But now, I'm not able, and it's about 1 hour I'm looking for a stupid error that I don't know if it's important or not ...
(all is on my Wiki : http://pix-mania.dyndns.org/mediawiki/index.php/Cups)
Here are a list of installed package : cups ghostscript gsfonts hplip
The printer (USB) :
(lsusb)
Bus 002 Device 004: ID 03f0:0004 Hewlett-Packard DeskJet 895c
(dmesg)
usb 2-2: new full speed USB device using uhci_hcd and address 4
usblp0: Disabling reads from problematic bidirectional printer
usblp0: USB Unidirectional printer dev 4 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0004
Current configuration (only change made to original configuration) :
Listen <ip_serveur>:631
<Location />
Order allow,deny
Allow From all
</Location>
<Location /admin>
Order allow,deny
Allow From all
</Location>
<Location /admin/conf>
AuthType Default
Require user @SYSTEM
Order allow,deny
Allow From all
</Location>
When starting cups service, all is fine : I can use a workstation to browse the Web Interface ... but printer seems to be not detected since it tells "No printers." when clicking on "Printers" tab. So, I go to "Administration" tab and, under "Printers", I click the "Find New Printers" and again, it says : "No printers found.".
Not goot ... so, like I was doing with Gentoo, I click on "Add Printer" ... then, I receive a redirection to HTTPS ... click on the link (or wait) and nothing happend (timed out): web interface is broken for HTTPS ... I really got no idea why HTTPS is not working .
After that, when updating the configuration (with vim) and restarting the service, deamon won't stop and I have to send a "kill -9" to the cupsd pid ...
I look in log and I can just see this :
E [09/Jan/2011:18:19:55 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
I googled for one hour, but is not more working right now ...
Some questions :
- the printer is not detected? Is it because of the ACLs errors ?
- what the hell is "ACLs" for cups ? Never seen that before ...
So, right now, I got a working HTTP but not working HTTPS, with no printer available ... very useless
This printer is working "well" with cups, since it's an old model and it's a HP printer, so is "fully?" working on Linux ...
Any idea on what to do/try now ?
EDIT: after that message, I just refresh the page (I'm using Chromium) and ... magically, HTTPS was working (after accept untrusted certificate for HTTPS?) ... Then, go back to "Find New Printers" and now, it was working. Printer has been added ... Seems to be OK, but the "Print Self Test Page" doesn't work right now because of this :
Unsupported format 'application/vnd.cups-command'!
Current log file :
E [09/Jan/2011:18:19:55 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:24:48 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:29:08 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:36:28 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:36:42 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:41:06 +0100] Unknown SystemGroup "sys root lpadmin" on line 13, ignoring!
E [09/Jan/2011:18:41:06 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:42:24 +0100] Unknown SystemGroup "lpadmin" on line 14, ignoring!
E [09/Jan/2011:18:42:24 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:45:12 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:47:32 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:48:35 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:49:35 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:59:46 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:19:33:06 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:06 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:06 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:37 +0100] [CGI] Unable to create avahi client: No such file or directory
E [09/Jan/2011:19:33:37 +0100] [cups-deviced] PID 2744 (dnssd) stopped with status 1!
E [09/Jan/2011:19:33:37 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:34:09 +0100] [CGI] Unable to create avahi client: No such file or directory
E [09/Jan/2011:19:34:09 +0100] [cups-deviced] PID 2763 (dnssd) stopped with status 1!
E [09/Jan/2011:19:39:51 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:39:52 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
E [09/Jan/2011:19:41:23 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
E [09/Jan/2011:19:44:49 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:47:16 +0100] Returning IPP client-error-document-format-not-supported for Send-Document (ipp://localhost:631/printers/HP_DeskJet_895C_USB_ES89M230MKGO_HPLIP) from localhost
E [09/Jan/2011:19:49:36 +0100] Returning IPP client-error-document-format-not-supported for Send-Document (ipp://localhost:631/printers/HP_DeskJet_895C_USB_ES89M230MKGO_HPLIP) from localhost
EDIT2: tried to print "Print Test Page" instead of the above ... and got these errors :
(web interface)
"/usr/lib/cups/backend/hp failed"
(error_log)
E [09/Jan/2011:20:08:31 +0100] [CGI] Unable to create avahi client: No such file or directory
E [09/Jan/2011:20:08:31 +0100] [cups-deviced] PID 3126 (dnssd) stopped with status 1!
D [09/Jan/2011:20:09:16 +0100] [Job 5] perl: warning: Setting locale failed.
D [09/Jan/2011:20:09:16 +0100] [Job 5] prnt/backend/hp.c 559: dBus Connection Error (Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)!
D [09/Jan/2011:20:09:16 +0100] [Job 5] perl: warning: Please check that your locale settings:
D [09/Jan/2011:20:09:16 +0100] [Job 5] LANGUAGE = (unset),
D [09/Jan/2011:20:09:16 +0100] [Job 5] LC_ALL = (unset),
D [09/Jan/2011:20:09:16 +0100] [Job 5] LANG = "fr_FR.UTF-8"
D [09/Jan/2011:20:09:16 +0100] [Job 5] are supported and installed on your system.
D [09/Jan/2011:20:09:16 +0100] [Job 5] perl: warning: Falling back to the standard locale ("C").
D [09/Jan/2011:20:09:16 +0100] [Job 5] GhostScript extra search path ('GS_LIB'): /usr/share/cups/fonts
D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'job-uuid=urn:uuid:e4395221-1209-32a9-5add-30f7945eaa6b'
D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option job-uuid=urn:uuid:e4395221-1209-32a9-5add-30f7945eaa6b.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'job-originating-host-name=localhost'
D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option job-originating-host-name=localhost.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'time-at-creation=1294600145'
D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option time-at-creation=1294600145.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'time-at-processing=1294600145'
D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option time-at-processing=1294600145.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'AP_D_InputSlot='
D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option AP_D_InputSlot=.
D [09/Jan/2011:20:09:16 +0100] [Job 5] prnt/backend/hp.c 625: ERROR: 5021 device communication error!
D [09/Jan/2011:20:09:16 +0100] [Job 5] GPL Ghostscript 9.00: Unrecoverable error, exit code 1
D [09/Jan/2011:20:09:16 +0100] [Job 5] Process 3154 ending: "gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=5..."
D [09/Jan/2011:20:09:16 +0100] [Job 5] renderer return value: 1
D [09/Jan/2011:20:09:16 +0100] [Job 5] renderer received signal: 1
D [09/Jan/2011:20:09:16 +0100] [Job 5] Process dying with "Possible error on renderer command line or PostScript error. Check options.", exit stat: 3
D [09/Jan/2011:20:09:16 +0100] [Job 5] error: No such file or directory (2)
D [09/Jan/2011:20:09:16 +0100] [Job 5] Cleaning up ...
D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3153 (KID4) with signal 15
D [09/Jan/2011:20:09:16 +0100] [Job 5] KID3 exited with status 3
D [09/Jan/2011:20:09:16 +0100] [Job 5] Renderer exit stat: 3
D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3153 (KID4) with signal 9
D [09/Jan/2011:20:09:16 +0100] [Job 5]
D [09/Jan/2011:20:09:16 +0100] [Job 5] Closing foomatic-rip.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Renderer process finished
D [09/Jan/2011:20:09:16 +0100] [Job 5] Process dying with "Error closing renderer", exit stat: 3
D [09/Jan/2011:20:09:16 +0100] [Job 5] error: (0)
D [09/Jan/2011:20:09:16 +0100] [Job 5] Cleaning up ...
D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3152 (KID3) with signal 15
D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3152 (KID3) with signal 9
D [09/Jan/2011:20:09:16 +0100] [Job 5] Error closing renderer
D [09/Jan/2011:20:09:16 +0100] [Job 5]
D [09/Jan/2011:20:09:16 +0100] [Job 5] Closing foomatic-rip.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Backend returned status 4 (stop printer)
D [09/Jan/2011:20:09:16 +0100] [Job 5] Printer stopped due to backend errors; please consult the error_log file for details.
D [09/Jan/2011:20:09:16 +0100] [Job 5] End of messages
D [09/Jan/2011:20:09:16 +0100] [Job 5] printer-state=5(stopped)
D [09/Jan/2011:20:09:16 +0100] [Job 5] printer-state-message="/usr/lib/cups/backend/hp failed"
D [09/Jan/2011:20:09:16 +0100] [Job 5] printer-state-reasons=paused
E [09/Jan/2011:20:14:21 +0100] [Job 5] Stopping unresponsive job!
EDIT3: I tested the ppd from cups (and not hpijs) and got the same problem ... The latest idea was to unplug USB and plug to another USB ... and it seams to works ... Now, the test page print "fine" ...
So, I shared the printer over my LAN, and tried to print from a workstation ... it works fine now ... when looking error_log, I can see than there is no more Ghostscript error .
But I have a last question .. if somebody can answer ... When choosing a PPD file, I have the choice between 3 version :
- hpijs, 3.10.9
- hpijs, 3.10.9.11
- hpcups, 3.10.9
Don't know why onlyl the HPIJS got the ".11" and not any others ... I selected this one and here is what Cups say about the printer :
HP_DeskJet_895C_USB_ES29Z231JKGO_HPLIP HP DeskJet 895C Local Printer HP Deskjet 895c hpijs, 3.10.9.11 Idle - "ready to print"
I hope when upgrading the system, I will not get error from PPD file not found ... With my current PPD file, I get (really not sure) this error, but print is working so, it doesn't matter :
E [09/Jan/2011:21:08:04 +0100] [CGI] Unable to create avahi client: No such file or directory
E [09/Jan/2011:21:08:04 +0100] [cups-deviced] PID 5705 (dnssd) stopped with status 1!
E [09/Jan/2011:21:08:09 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
Thanks for all .. hope you don't think I'm crazy ^^
Last edited by loopx (2011-01-09 20:31:21)WD and their lack of support for Mavericks:
A recent email from WD reads:
Dear WD Registered Customer,
UPDATE: November 1st, 2013
As a valued WD customer we want to make you aware of new reports of Western Digital and other external HDD products experiencing data loss when updating to Apple's OS X Mavericks (10.9). WD is urgently investigating these reports and the possible connection to the WD Drive Manager, WD Raid Manager and WD SmartWare software applications. Until the issue is understood and the cause identified, WD strongly urges our customers to uninstall these software applications before updating to OS X Mavericks (10.9), or delay upgrading. If you have already upgraded to Mavericks, WD recommends that you remove these applications and restart your computer. If you have already upgraded to Mavericks and are experiencing difficulty in accessing your external hard drive, please do not save anything to the drive, disconnect the drive from your computer, and contact Western Digital Customer Service at http://support.wd.com/country/ for further assistance.
The WD Drive Manager, WD Raid Manager, and WD SmartWare software applications are not new and have been available from WD for many years. However, solely as a precaution WD has removed these applications from our website as we investigate this issue.
Sincerely,
Western Digital
Which is basically Western Digital informing you that their out-of-date utilities don’t support Mavericks.
In any case those utilities are not the most effective. The moral of the story is: the first thing you should do after buying a WD drive is to format it as HFS Extended (Journaled) and not install ANY of their utilities but instead use reliable applications like CarbonCopyCloner or SuperDuper - or Time Machine. -
Fiori Launchpad Error: Failure - Unable to load groups Resolved!!!!
Hey Good Fellas,
This is a solution rather than a discussion, which i thought to do to with a kind generosity of spirit to give back to the community.
It gives me immense pleasure and happiness to write this particular post, because it is through SCN only i have been able to find the solution.
Ok, let's get down to the Business quickly, shall we?
I have been configuring Fiori App - Approve Purchase Orders. All the tasks for this have been done from SAP Help Site.
Recently I upgraded the ERP/Gateway (Its an embedded deployment) to EHP 7 and UI to SP09, post which the Fiori Launchpad started giving the below error.
If you look around the SCN, you will probably hit across these threads and so did I.
http://scn.sap.com/thread/3571448
SAP Fiori - UI Add-on SP09 update troubleshooting
With the first thread, I tried everyone's solution and suggestions which had worked for others, but it didn't for me.
With second thread (Excellently posted by Masayuki Sekihara), it started off with lots of efforts and double-checks applying all of these notes hoping that it would resolve the issue. But I had done all the steps 1-8 and still didn't get the solution.
Besides the above two mentions I did umpteen number of other ridiculous things like implementing this note, that note, De-implementing another of the notes and everything i found as possible solutions on the Web.
Now, the breakthrough here is checking the errors in /IWFND/ERROR_LOG. Well, on the browser it used to give error 'Failure - Unable to Load Groups' while at the server side, actual error was something unusual and remotely not related to what the error looked like in the browser. In the back-end, I was getting the error "Data Provider implementation 'ZINTEROP_MODEL_0001_BE' '01' 'DEFAULT' does not exist". And this is something i know how to correct.
So just keep looking for the errors in /IWFND/ERROR_LOG and shift your focus there. That's really a good place to trouble-shoot.
And for the record to take care of the error 'Data Provider implementation 'ZINTEROP_MODEL_0001_BE' '01' 'DEFAULT' does not exist' you have to assign the DPC (Data Provider Class) to DMC (Data Modelling Class) correctly by navigating to IMG - SAP Netweaver - Gateway - Former Development - Local OData Channel Development - Registration - Assign Data Provider to Data Model. There you define the Data provider with the correct Software Version and Voila you are all set! You don't have to worry about the duplicate entry with another Software version, your correct software version is the one you have defined in the System Alias which you are using inside the service, which is generally DEFAULT.
I am able to get inside the Fiori Launchpad now (I was quite at edge to really give up as all the possible solutions had been ruled out for me ) and do see the tiles of the apps configured.
I hope this is going to be a good take-away for others who are having Odata handling issues.
The floor is all yours now for your kind feedback. Be gentle with me, I am a very shy blogger.
Best Regards,
AkshaySteve,
If you still have the error, this is what I did to resolve mines.
1) Goto SPRO - SAP Netweaver - Gateway - Former Development - Local OData Channel Development - Registration - Assign Data Provider to Data Model
2) Find out the entry for 'ZINTEROP_MODEL_0001_BE'
3) Copy that entire row in a notepad for all the fields
4) Create new Entry with all the fields, except change the Software Version to DEFAULT (As that's what missing for you'
5) Save and give that another try.
This is what I exactly wrote in my solution as well.
Akshay wrote:
And for the record to take care of the error 'Data Provider implementation 'ZINTEROP_MODEL_0001_BE' '01' 'DEFAULT' does not exist' you have to assign the DPC (Data Provider Class) to DMC (Data Modelling Class) correctly by navigating to IMG - SAP Netweaver - Gateway - Former Development - Local OData Channel Development - Registration - Assign Data Provider to Data Model. There you define the Data provider with the correct Software Version and Voila you are all set! You don't have to worry about the duplicate entry with another Software version, your correct software version is the one you have defined in the System Alias which you are using inside the service, which is generally DEFAULT.
A screen-shot perhaps helps you more.
Let the other duplicate entry with Software Version other than Default be there. Important is that the software version that you have defined in your alias must be the one over here.
Let me know how that goes?
-Akshay -
Unable to set user environment in instlation
hi experts,
im trying to install ecc 6.o enp 4 ready on AIX db3 on ibm power PPC 64
i stuck after database installation, its said database client and server version mismatch, and installation is stopped
then i uninstalled db users groups but its asking manually to remove DB2/SID directory and /usr/sap/<SID> directory.
and if i try to run again sapinst its stucks on create users and give error unable to create user environment.
the error is
ERROR 2010-10-02 03:08:16.977 [sixxcstepexecute.cpp:950]
FCO-00011 The step setUserEnvironment with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0
|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0|setUserEnvi
ronment was executed with status ERROR .
does anyone faces similar problem earlier, how can i proceed?
thankx in advance
Edited by: nikhil jadhav on Oct 1, 2010 1:11 PMHi
Have you found a solution to this problem?
I am trying to create User accounts in my Windows AD, and I keep getting the error :
*"Unable to set user info. The name provided is not a properly formed account name"* -
Hi,
I´m trying to reduce scale on a group of objects;a map, some lines with arrows and shade and also text blocks. When I´m trying to reduce the size of the group the message "unable to set bounding box" pops up and its impossible to continue scaling. It has happened with different files and objects, always the same message.
I´m using Indesign CS3 5.03 on Xp professionalOkay....stupid fix worked. I was having this problem with a dieline for a package. Came out of the blue as I have done this countless time before with out any problem. Today, however, CS4 is feeling stubborn.
Well, I ungrouped it. Grouped it again. Now it works fine.
Go figure.
Hope this works for someone else as well! -
I am unable to set up my microsoft outlook for email
I am unable to set up Microsoft Outlook on my I pad. After I put in my email address for outlook it asks for a password and it will not take my apple password. Am I supposed to use something else?
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694http://support.apple.com/kb/ht1694
iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
http://support.apple.com/kb/TS1944http://support.apple.com/kb/TS1944
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.htmlhttp://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
How to Sync Contacts with Your iPad Using iTunes
http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.htmlhttp://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621http://support.apple.com/kb/ts2621
iCloud: Create a group and add contacts to it
http://support.apple.com/kb/PH2667http://support.apple.com/kb/PH2667
eMail Groups - You can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
Cheers, Tom -
Error Deployer BEA-149231 Unable to set the activation state to true
Hi Friends ,
We are using weblogic 10.3.5.0, one of the deployment module is in failed status.
In the application logs we could see the following error
ERROR Util: Initial Spring Application Context creation failed: org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'datasource' defined in class path resource [spring.xml]: Invocation of init method failed; nested exception is javax.naming.NoPermissionException: User <anonymous> does not have permission on comp.env.cpt to perform lookup operation
in the weblogic server logs we could find the follow error
<24-Jan-2013 08:47:43 o'clock CET> <Warning> <HTTP> <BEA-101162> <User defined listener org.apache.myfaces.webapp.StartupServletContextListener failed: java.lang.ExceptionInInitializerError.java.lang.ExceptionInInitializerError
at com.db.cpt.biz.Utilities.Util.<clinit>(Util.java:114)
at com.db.cpt.web.listener.MyPhaseListener.<clinit>(MyPhaseListener.java:26)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
Truncated. see log file for complete stacktrace
Caused By: org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'datasource' defined in class path resource [spring.xml]: Invocati
on of init method failed; nested exception is javax.naming.NoPermissionException: User <anonymous> does not have permission on comp.env.cpt to perform lookup operation.
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1170)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:427)
at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:249)
at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:155)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:246)
Truncated. see log file for complete stacktrace
Caused By: javax.naming.NoPermissionException: User <anonymous> does not have permission on comp.env.xxx to perform lookup operation.
at weblogic.jndi.internal.ServerNamingNode.checkPermission(ServerNamingNode.java:443)
at weblogic.jndi.internal.ServerNamingNode.checkLookup(ServerNamingNode.java:423)
at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:180)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:214)
Truncated. see log file for complete stacktrace
>
<24-Jan-2013 08:47:43 o'clock CET> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'xxx'.
weblogic.application.ModuleException:
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1510)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
Truncated. see log file for complete stacktrace
Caused By: javax.naming.NoPermissionException: User <anonymous> does not have permission on comp.env.cpt to perform lookup operation.
at weblogic.jndi.internal.ServerNamingNode.checkPermission(ServerNamingNode.java:443)
at weblogic.jndi.internal.ServerNamingNode.checkLookup(ServerNamingNode.java:423)
at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:180)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:214)
Truncated. see log file for complete stacktrace
Can you please advise us how can we resolve this issue which with i am struggling
RajaKumar,
thanks for the update.
we fixed the issue,
for a particular user we didnt add his membership in a group in security realm, we added the user to a particular group, and then restarted weblogic, and deployed the module, and then status of deployment becomes successful.
Raja -
Setting Groups to DynamicUserConfiguration for AppV Package through powershell
Hi All,
I'm trying to set Groups to a package with DynamicUserConfiguration,I'm unable to understand why it is not happening.
Here is what I'm trying
PS C:\Windows\system32> Set-AppvServerPackage -PackageID 1e853f49-9b2c-4e58-8cd1-d25496019134 -DynamicUserConfigurationPath "\\172.18.24.175\Publish\Firefox 9\appv\Firefox9_UserConfig.xml" -VersionID 6e9e47ee-5c38-45a6-b71c-1d96147bbef0
-Groups "domain\groupname"
Set-AppvServerPackage : An unexpected error occurred during processing.
At line:1 char:1
+ Set-AppvServerPackage -PackageID 1e853f49-9b2c-4e58-8cd1-d25496019134 -DynamicUs ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [Set-AppvServerPackage], Exception
+ FullyQualifiedErrorId : ServiceError,Microsoft.AppV.Server.Cmdlets.SetAppvServerPackageCommand
I even tried with file package name
PS C:\Windows\system32> Set-AppvServerPackage -Name Firefox9 -DynamicUserConfigurationPath"\\172.18.24.175\Publish\Firefox 9\appv\Firefox9_UserConfig.xml" -Groups "asdev\administrators"
Set-AppvServerPackage : An unexpected error occurred during processing.
At line:1 char:1
+ Set-AppvServerPackage -Name Firefox9 -DynamicUserConfigurationPath "\\172.18.24. ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [Set-AppvServerPackage], Exception
+ FullyQualifiedErrorId : ServiceError,Microsoft.AppV.Server.Cmdlets.SetAppvServerPackageCommand
Can anyone please tell me where am i going wrong ?
Note:Get-help Set-AppVserverPackage -detailed doesn't have complete documentation.
Thanks,
Sumit.Both commands look right - supposed the package was added before to the Management Server.
You could cross-check if the path to the XML files is correct and if you and the machine have permission to access it. Also check if it is 'really' a User Config (and not a deployment config).
Did you try using the Management Console?
Falko
Twitter
@kirk_tn | Blog
kirxblog | Web
kirx.org | Fireside
appvbook.com -
FSL-04017 Unable to change group. ID: 505. Operation not permitted
while i'm installing Solution manager 4.0 with oracle 10g in linux enterprise 4,after the 23rd phase which is "install instance basics" i recived the following error
INFO 2007-06-25 12:02:25
Working directory changed to /tmp/sapinst_exe.3484.1182753067.
INFO 2007-06-25 12:02:25
Working directory changed to /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS.
INFO 2007-06-25 12:02:25
Working directory changed to /tmp/sapinst_exe.3484.1182753067.
INFO 2007-06-25 12:02:25
Working directory changed to /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS.
INFO 2007-06-25 12:02:26
Working directory changed to /tmp/sapinst_exe.3484.1182753067.
INFO 2007-06-25 12:02:26
Working directory changed to /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS.
WARNING[E] 2007-06-25 12:02:26
FSL-02015 Node /proc/sys/kernel/cad_pid does not exist.
WARNING[E] 2007-06-25 12:02:26
FSL-02015 Node /proc/sys/kernel/cap-bound does not exist.
WARNING[E] 2007-06-25 12:02:26
FSL-02015 Node /proc/sys/fs/binfmt_misc/register does not exist.
INFO 2007-06-25 12:02:27
Copied file '/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/inifile.xml' to '/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/inifile.14.xml'.
INFO 2007-06-25 12:02:27
Copied file '/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/inifile.xml' to '/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/inifile.15.xml'.
INFO 2007-06-25 12:02:40
Copied file '/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/keydb.xml' to '/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/keydb.8.xml'.
INFO 2007-06-25 12:02:41
Execute step createInstanceDirectories of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0.
INFO 2007-06-25 12:02:55
Working directory changed to /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS.
INFO 2007-06-25 12:02:55
Working directory changed to /tmp/sapinst_exe.3484.1182753067.
INFO 2007-06-25 12:02:55
Working directory changed to /tmp/sapinst_exe.3484.1182753067.
INFO 2007-06-25 12:02:55
Working directory changed to /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS.
INFO 2007-06-25 12:02:55
Creating instance directories for instance IND/DVEBMGS00...
INFO 2007-06-25 12:02:56
File system node /usr/sap/ccms/IND_00 exists already. Nothing to do.
INFO 2007-06-25 12:02:56
File system node /usr/sap/IND/put exists already. Nothing to do.
INFO 2007-06-25 12:02:56
Account indadm already exists.
INFO 2007-06-25 12:02:56
Account 507 already exists.
INFO 2007-06-25 12:02:56
Account 507 already exists.
INFO 2007-06-25 12:02:56
Account sapsys already exists.
ERROR 2007-06-25 12:02:56
MUT-03025 Caught ESyException in Modulecall: Could not set effective group. Operation not permitted.
ERROR 2007-06-25 12:02:56
FSL-04017 Unable to change group. ID: 505. Operation not permitted
ERROR 2007-06-25 12:02:56
FCO-00011 The step createInstanceDirectories with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|createInstanceDirectories was executed with status ERROR .
thks & Rgds
George VargheseHi
Well, it is not advised to do it manually, the logged in user (sidadm)
should have the permissions, the reason being it is required at several points of time and with several folders..
However, for learning purpose, here is the syntax to be given in command line-
chgrp -R groupname <directoryName> (for all subdirectory - recursive)
I gave this jsut to cross verify, please assign the access rights (add to admin group) and then continue installation,
Revert for queries,
Cheers
Senthil
Maybe you are looking for
-
How can I get my old iPod onto my new computer without my old computer?
The hard drive on my old computer recently crashed and there was no way to recover anything from it. I was currently using iTunes 7 on that computer so everything was updated. I was using Windows XP on my old computer but I just bought a new one that
-
The jsp file does not open the new login window but opens the source code.....plz help
When i try to log in to the log in link at the site https://efp.bpcl.in the log in page does not open but the firefox wants to ask with which program the firefox should open the file and when we give firefox or internet explorer than it opens the sou
-
So my old laptop died last year after four years of faithful service, in spite of being treated as no laptop should. Since I'd had it for so long, my family got me a (pre-used) new one. Since my old one had been treated like crap, I was determined to
-
I can't connect my MBP to my Sony Bravia
2009 MPB OS 10.5.8, 2.26 GHz Intel Processor, NVIDIA GeForce 9400m Sony Bravia “BRAVIA” Connected with a Gigaware Mdp to HDMI adapter, and a Radioshack 3ft. HDMI cable The MBP doesn't detect anything, hitting "Detect Displays" does nothing.
-
How do I delete all the messages in my Inbox on my iphone 4S
How do I delete all the messages at one time in my inbox on teh iphone 4S