Unable to set homepage as google.co.in

i go to tool , then option then general , and in home page i change my home page , but only for that day home page change , next day again same old site open in new tab as a home page

OK..
Tried downloading the reg hack for Windows Live and modifying it to change the path to Outlook (as recommended by Brett above), no luck. Verified that it installed the key properly, also verified that the path I gave it will open Outlook 2013 (ran on the command line), however it did not change the behavior - still no way to select Outlook in the PSE10 preferences. Rebooted, no change.
Tried the solution recommended in the Microsoft KB article at http://support.microsoft.com/kb/813745 (from the PSE forum posting here - http://forums.adobe.com/message/5117353#5117353).
First ran the "fix it for me" - which stopped when it realized I did not have a supported version of Outlook (apparently it's only good to Outlook 2010), warned me, and dropped out.
Ran the manual fix process. When I get to the "repair outlook" portion there is another repair option not mentioned in this - "online repair", which purports to be the most comprehensive fix (not the "quick fix", the other option.) I ran the online repair, it failed "something went wrong" please try installing office again.
Likely the manual fix I tried first broke office, so now I'm going to submit this and then restore my registry and reboot....
Still no other email options in PSE10, though.

Similar Messages

I have a mac and cannot set homepage to google, where is the hometoolbarbutton?

I have a mac and want to set my homepage to google, but cannot find the hometoolbar button?
please advise.
Thanks

Hello Michele.
First of all, I should warn you that the version of Firefox you are using at the moment is outdated and is no longer supported. Please install the latest version for maximum speed, security and functionality. It's completely free, as always. You can get it through Firefox update service (Help > Check for updates...) or at www.getfirefox.com
That aside, I don't understand what the exact nature of your problem is, but this is what you probably need to know:
- to change your homepage, you can go into Tools > Options > General and enter the desired address (or addresses) into the "Home Page" field.
- if, for some reason, your home button is not visible in your toolbar, you can put it back by either restoring your toolbar back to its default configuration (go into View > Toolbars > Customize... and click "Restore default set") or by putting it where you want (go into View > Toolbars > Customize... and drag and drop the home page button into where you want it in the toolbar).
I hope this helps.

When I open a new tab is doesn't open to my set homepage as it would if opening firefox from start. It instead opens to a "default" page with pogo powered by yahoo, I want to change to google. How do I do this?

Opening firefox from begining, I have been able to set it to always open to google as it was in my old firefox default settings. If I remember correctly when you opened a tab, it would automatically open to the homepage. I'm not expierencing this with the new version. It is automatically going to the default page rather than the set homepage. (I just have learned to prefer the google search over the yahoo search over the years and am resistant to changing over, sorry)

A new tab opens by default as a blank tab (about:blank).<br />
If that isn't the case then an extension has changed that behavior.
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
You can look at one of these extensions:
* NewTabURL : https://addons.mozilla.org/firefox/addon/newtaburl/
* New Tab Homepage : https://addons.mozilla.org/firefox/addon/new-tab-homepage/

We had a tower problem in our area and now I am unable to sign into my google account on my phone. I have tried to remove my account and set it up again, but am still having the same issue. It does not let me sign in keeps saying that sync is not respondi

I am unable to sign into my google account after a tower being down. Any ideas

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
 Cheers, Tom

How can I set new tabs to automatically show my homepage? (My homepage is Google)

Whenever I open a new tab, it has a "New Browser tab" page with a search bar powered by ask.
I would like to be able to set any new tabs I open using the "add tab" tab, to Google.com
I can set my homepage to google, but cannot set any new tab to google. How can I do this?
Thanks
Heather

I got this - the culprit was the Foxit .pdf creator toolbar.
Regards,
Springnuts.
-

Unable to set up Google Apps email

Hi
I am trying to set up my Google Apps email account in Apple Mail. (ML 10.8.5)
It is an exchange account.
When enter account in Apple Mail, it creates the exchange account automatically. However i think the incoming server is incorrect as it is not d/l emails from gmail.
I have seen notes where they say to enable IMAP on the account. But my gmail account is set up as exchange. Will this interfere with my exchange/push fucntionality on my ios device if I enable IMAP?
Do I have to enable IMAP at all?
I am confused.
Thanks and I look forward to your reply.

set smtp and pop port no in settings
*************Plese *********LIKE**** & ****ACCEPT as Solution*** If you got suggestion for your Query.
@RAJESH SVM ----- Blackberry Mobile App Developer, Blaze, India.

[CUPS] Unable to set my new CUPS server with an HP printer (solved)

Hello,
I come from Gentoo and I just installed my new Arch Linux server on a notebook with 2 NIC ... Now, I'm trying to set the CUPS deamon to share printer (HP DESKJET 895Cxi) for 3 workstations in my LAN. Before, it was working (printer and linux ... has never been very good...). But now, I'm not able, and it's about 1 hour I'm looking for a stupid error that I don't know if it's important or not ...
(all is on my Wiki : http://pix-mania.dyndns.org/mediawiki/index.php/Cups)
Here are a list of installed package : cups ghostscript gsfonts hplip
The printer (USB) :
(lsusb)
Bus 002 Device 004: ID 03f0:0004 Hewlett-Packard DeskJet 895c
(dmesg)
usb 2-2: new full speed USB device using uhci_hcd and address 4
usblp0: Disabling reads from problematic bidirectional printer
usblp0: USB Unidirectional printer dev 4 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0004
Current configuration (only change made to original configuration) :
Listen <ip_serveur>:631
<Location />
Order allow,deny
Allow From all
</Location>
<Location /admin>
Order allow,deny
Allow From all
</Location>
<Location /admin/conf>
AuthType Default
Require user @SYSTEM
Order allow,deny
Allow From all
</Location>
When starting cups service, all is fine : I can use a workstation to browse the Web Interface ... but printer seems to be not detected since it tells "No printers." when clicking on "Printers" tab. So, I go to "Administration" tab and, under "Printers", I click the "Find New Printers" and again, it says : "No printers found.".
Not goot ... so, like I was doing with Gentoo, I click on "Add Printer" ... then, I receive a redirection to HTTPS ... click on the link (or wait) and nothing happend (timed out): web interface is broken for HTTPS ... I really got no idea why HTTPS is not working .
After that, when updating the configuration (with vim) and restarting the service, deamon won't stop and I have to send a "kill -9" to the cupsd pid ...
I look in log and I can just see this :
E [09/Jan/2011:18:19:55 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
I googled for one hour, but is not more working right now ...
Some questions :
- the printer is not detected? Is it because of the ACLs errors ?
- what the hell is "ACLs" for cups ? Never seen that before ...
So, right now, I got a working HTTP but not working HTTPS, with no printer available ... very useless
This printer is working "well" with cups, since it's an old model and it's a HP printer, so is "fully?" working on Linux ...
Any idea on what to do/try now ?
EDIT: after that message, I just refresh the page (I'm using Chromium) and ... magically, HTTPS was working (after accept untrusted certificate for HTTPS?) ... Then, go back to "Find New Printers" and now, it was working. Printer has been added ... Seems to be OK, but the "Print Self Test Page" doesn't work right now because of this :
Unsupported format 'application/vnd.cups-command'!
Current log file :
E [09/Jan/2011:18:19:55 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:24:48 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:29:08 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:36:28 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:36:42 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:41:06 +0100] Unknown SystemGroup "sys root lpadmin" on line 13, ignoring!
E [09/Jan/2011:18:41:06 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:42:24 +0100] Unknown SystemGroup "lpadmin" on line 14, ignoring!
E [09/Jan/2011:18:42:24 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:45:12 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:47:32 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:48:35 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:49:35 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:59:46 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:19:33:06 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:06 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:06 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:37 +0100] [CGI] Unable to create avahi client: No such file or directory
E [09/Jan/2011:19:33:37 +0100] [cups-deviced] PID 2744 (dnssd) stopped with status 1!
E [09/Jan/2011:19:33:37 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:34:09 +0100] [CGI] Unable to create avahi client: No such file or directory
E [09/Jan/2011:19:34:09 +0100] [cups-deviced] PID 2763 (dnssd) stopped with status 1!
E [09/Jan/2011:19:39:51 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:39:52 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
E [09/Jan/2011:19:41:23 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
E [09/Jan/2011:19:44:49 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:47:16 +0100] Returning IPP client-error-document-format-not-supported for Send-Document (ipp://localhost:631/printers/HP_DeskJet_895C_USB_ES89M230MKGO_HPLIP) from localhost
E [09/Jan/2011:19:49:36 +0100] Returning IPP client-error-document-format-not-supported for Send-Document (ipp://localhost:631/printers/HP_DeskJet_895C_USB_ES89M230MKGO_HPLIP) from localhost
EDIT2: tried to print "Print Test Page" instead of the above ... and got these errors :
(web interface)
"/usr/lib/cups/backend/hp failed"
(error_log)
E [09/Jan/2011:20:08:31 +0100] [CGI] Unable to create avahi client: No such file or directory
E [09/Jan/2011:20:08:31 +0100] [cups-deviced] PID 3126 (dnssd) stopped with status 1!
D [09/Jan/2011:20:09:16 +0100] [Job 5] perl: warning: Setting locale failed.
D [09/Jan/2011:20:09:16 +0100] [Job 5] prnt/backend/hp.c 559: dBus Connection Error (Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)!
D [09/Jan/2011:20:09:16 +0100] [Job 5] perl: warning: Please check that your locale settings:
D [09/Jan/2011:20:09:16 +0100] [Job 5] LANGUAGE = (unset),
D [09/Jan/2011:20:09:16 +0100] [Job 5] LC_ALL = (unset),
D [09/Jan/2011:20:09:16 +0100] [Job 5] LANG = "fr_FR.UTF-8"
D [09/Jan/2011:20:09:16 +0100] [Job 5] are supported and installed on your system.
D [09/Jan/2011:20:09:16 +0100] [Job 5] perl: warning: Falling back to the standard locale ("C").
D [09/Jan/2011:20:09:16 +0100] [Job 5] GhostScript extra search path ('GS_LIB'): /usr/share/cups/fonts
D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'job-uuid=urn:uuid:e4395221-1209-32a9-5add-30f7945eaa6b'
D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option job-uuid=urn:uuid:e4395221-1209-32a9-5add-30f7945eaa6b.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'job-originating-host-name=localhost'
D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option job-originating-host-name=localhost.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'time-at-creation=1294600145'
D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option time-at-creation=1294600145.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'time-at-processing=1294600145'
D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option time-at-processing=1294600145.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'AP_D_InputSlot='
D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option AP_D_InputSlot=.
D [09/Jan/2011:20:09:16 +0100] [Job 5] prnt/backend/hp.c 625: ERROR: 5021 device communication error!
D [09/Jan/2011:20:09:16 +0100] [Job 5] GPL Ghostscript 9.00: Unrecoverable error, exit code 1
D [09/Jan/2011:20:09:16 +0100] [Job 5] Process 3154 ending: "gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=5..."
D [09/Jan/2011:20:09:16 +0100] [Job 5] renderer return value: 1
D [09/Jan/2011:20:09:16 +0100] [Job 5] renderer received signal: 1
D [09/Jan/2011:20:09:16 +0100] [Job 5] Process dying with "Possible error on renderer command line or PostScript error. Check options.", exit stat: 3
D [09/Jan/2011:20:09:16 +0100] [Job 5] error: No such file or directory (2)
D [09/Jan/2011:20:09:16 +0100] [Job 5] Cleaning up ...
D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3153 (KID4) with signal 15
D [09/Jan/2011:20:09:16 +0100] [Job 5] KID3 exited with status 3
D [09/Jan/2011:20:09:16 +0100] [Job 5] Renderer exit stat: 3
D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3153 (KID4) with signal 9
D [09/Jan/2011:20:09:16 +0100] [Job 5]
D [09/Jan/2011:20:09:16 +0100] [Job 5] Closing foomatic-rip.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Renderer process finished
D [09/Jan/2011:20:09:16 +0100] [Job 5] Process dying with "Error closing renderer", exit stat: 3
D [09/Jan/2011:20:09:16 +0100] [Job 5] error: (0)
D [09/Jan/2011:20:09:16 +0100] [Job 5] Cleaning up ...
D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3152 (KID3) with signal 15
D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3152 (KID3) with signal 9
D [09/Jan/2011:20:09:16 +0100] [Job 5] Error closing renderer
D [09/Jan/2011:20:09:16 +0100] [Job 5]
D [09/Jan/2011:20:09:16 +0100] [Job 5] Closing foomatic-rip.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Backend returned status 4 (stop printer)
D [09/Jan/2011:20:09:16 +0100] [Job 5] Printer stopped due to backend errors; please consult the error_log file for details.
D [09/Jan/2011:20:09:16 +0100] [Job 5] End of messages
D [09/Jan/2011:20:09:16 +0100] [Job 5] printer-state=5(stopped)
D [09/Jan/2011:20:09:16 +0100] [Job 5] printer-state-message="/usr/lib/cups/backend/hp failed"
D [09/Jan/2011:20:09:16 +0100] [Job 5] printer-state-reasons=paused
E [09/Jan/2011:20:14:21 +0100] [Job 5] Stopping unresponsive job!
EDIT3: I tested the ppd from cups (and not hpijs) and got the same problem ... The latest idea was to unplug USB and plug to another USB ... and it seams to works ... Now, the test page print "fine" ...
So, I shared the printer over my LAN, and tried to print from a workstation ... it works fine now ... when looking error_log, I can see than there is no more Ghostscript error .
But I have a last question .. if somebody can answer ... When choosing a PPD file, I have the choice between 3 version :
- hpijs, 3.10.9
- hpijs, 3.10.9.11
- hpcups, 3.10.9
Don't know why onlyl the HPIJS got the ".11" and not any others ... I selected this one and here is what Cups say about the printer :
HP_DeskJet_895C_USB_ES29Z231JKGO_HPLIP HP DeskJet 895C Local Printer HP Deskjet 895c hpijs, 3.10.9.11 Idle - "ready to print"
I hope when upgrading the system, I will not get error from PPD file not found ... With my current PPD file, I get (really not sure) this error, but print is working so, it doesn't matter :
E [09/Jan/2011:21:08:04 +0100] [CGI] Unable to create avahi client: No such file or directory
E [09/Jan/2011:21:08:04 +0100] [cups-deviced] PID 5705 (dnssd) stopped with status 1!
E [09/Jan/2011:21:08:09 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
Thanks for all .. hope you don't think I'm crazy ^^
Last edited by loopx (2011-01-09 20:31:21)

WD and their lack of support for Mavericks:
A recent email from WD reads:
Dear WD Registered Customer,
UPDATE: November 1st, 2013
As a valued WD customer we want to make you aware of new reports of Western Digital and other external HDD products experiencing data loss when updating to Apple's OS X Mavericks (10.9). WD is urgently investigating these reports and the possible connection to the WD Drive Manager, WD Raid Manager and WD SmartWare software applications. Until the issue is understood and the cause identified, WD strongly urges our customers to uninstall these software applications before updating to OS X Mavericks (10.9), or delay upgrading. If you have already upgraded to Mavericks, WD recommends that you remove these applications and restart your computer. If you have already upgraded to Mavericks and are experiencing difficulty in accessing your external hard drive, please do not save anything to the drive, disconnect the drive from your computer, and contact Western Digital Customer Service at http://support.wd.com/country/ for further assistance.
The WD Drive Manager, WD Raid Manager, and WD SmartWare software applications are not new and have been available from WD for many years. However, solely as a precaution WD has removed these applications from our website as we investigate this issue.
Sincerely,
Western Digital
Which is basically Western Digital informing you that their out-of-date utilities don’t support Mavericks.
In any case those utilities are not the most effective. The moral of the story is: the first thing you should do after buying a WD drive is to format it as HFS Extended (Journaled) and not install ANY of their utilities but instead use reliable applications like CarbonCopyCloner or SuperDuper - or Time Machine.

"Unable to set shared config DC." when running setup /RecoverServer

Hi guys,
I'm hoping for a bit of assistance. I have stepped into an environment where there is one production Exchange 2010 server and one Exchange 2013 server. The Exchange 2013 server is in a unrecoverable state however it contains the domain administrators mailbox
and therefore I cannot remove it manually. As it was a vm, I took it offline, created an identical server (name, os version(Windows 2008 R2 with latest updates), ip address etc.), installed all the prerequisite components and then ran setup /m:RecoverServer
/IAcceptExchangeServerLicenseTerms. Everything runs through successfully until it gets to the Mailbox role: Transport service where it fails with "Unable to set shared config DC.". After some searching on Google,
it suggests that ipv6 is disabled on the DC. We have two DC's in our environment and both have ipv6 enabled as does the exchange server. If I try to re-run the installation for the role alone, i.e. Setup /mode:install /IAcceptExchangeServerLicenseTerms
/role:HubTransport, it fails with "The machine is not configured for installing "BridgeheadRole" Datacenter Role."
Any help would be greatly appreciated.

Thanks Amit, I understand there's no hubtransport role in 2013 but this is the error that it's throwing:
PS D:\> .\setup /m:RecoverServer /IAcceptExchangeServerLicenseTerms
Welcome to Microsoft Exchange Server 2013 Service Pack 1 Unattended Setup
Copying Files...
File copy complete. Setup will now collect additional information needed for
installation.
Languages
Mailbox role: Transport service
Mailbox role: Client Access service
Mailbox role: Unified Messaging service
Mailbox role: Mailbox service
Management tools
Client Access role: Client Access Front End service
Client Access role: Front End Transport service
Performing Microsoft Exchange Server Prerequisite Check
Configuring Prerequisites COMPLETED
Prerequisite Analysis FAILED
A Setup failure previously occurred while installing the HubTransportRole r
ole. Either run Setup again for just this role, or remove the role using Control
Panel.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150
)/ms.exch.setupreadiness.InstallWatermark.aspx
The Exchange Server setup operation didn't complete. More details can be found
in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
Any other thoughts?

Can't set homepage

I tried to set homepage - Tools/Options/General then added the URL of my homepage. Clicked OK.<br />
I then set my Desktop as the Destination for Downloads. Clicked OK.<br />
After opening Firefox next time, up comes the unwanted "Welcome" page - which is unstoppable, and has been for days - and my desired homepage was not opened again. The location for Downloads was back again to "Downloads"<br />
I'm getting somewhat angry at my inability to control Firefox, and finding that Firefox is unresponsive to my demands.
Has anyone any idea how this may be fixed?
Colin.
After writing this, I went through the Troubleshooter details. I am unable to discover any assistance there, my technical knowledge may be at fault, I would be grateful if anyone could look and see if there is anything mentioned that might give a clue as to the problem's cause. Thanks.

You can create an HTML backup and a JSON backup in Firefox the be prepared from problems with the bookmarks.
You can do this in the Bookmarks Manager (Bookmarks > Show All Bookmarks).
*https://support.mozilla.org/kb/how-do-i-use-bookmarks

Unable to set Open Directory master on brand new server

I have a brand new Mac Mini server running 10.6.2 which I am unable to set as an OD master, receiving the error "There was a configuration error when configuring your server as an Open Directory Master. See the Configuration Log for more information about the failure."
The log reads as follows...
2010-01-10 10:34:31 +1100 - slapconfig -createldapmasterandadmin
2010-01-10 10:34:31 +1100 - Creating password server slot
2010-01-10 10:34:31 +1100 - command: /usr/sbin/mkpassdb -a -u diradmin -p -q
2010-01-10 10:34:32 +1100 - command: /usr/sbin/mkpassdb -a -u root -p -q
2010-01-10 10:34:32 +1100 - command: /usr/sbin/mkpassdb -a -u paisleypark.local$ -p -q
2010-01-10 10:34:32 +1100 - command: /usr/sbin/mkpassdb -setcomputeraccount 0x4b4912886b8b45670000001b0000001b
2010-01-10 10:34:32 +1100 - Setting SASL realm to <OpenDirectory.pIxrV9>
2010-01-10 10:34:32 +1100 - command: /usr/sbin/mkpassdb -setrealm OpenDirectory.pIxrV9
2010-01-10 10:34:32 +1100 - Copied file from /etc/openldap/slapd.conf to /etc/openldap/slapd.conf.backup.
2010-01-10 10:34:34 +1100 - command: /usr/bin/net getlocalsid
2010-01-10 10:34:34 +1100 - Removed file at path /var/db/openldap/openldap-data/DB_CONFIG.
2010-01-10 10:34:34 +1100 - Starting LDAP server (slapd)
2010-01-10 10:34:54 +1100 - Error: The slapd process did not start.
2010-01-10 10:34:54 +1100 - Stopping LDAP server (slapd)
2010-01-10 10:34:54 +1100 - Removed file at path /var/run/slapconfig.lock.
... but I am unable to locate any reference to the specific error in these forums or via my friendly neighbourhood Google.
Any ideas greatly appreciated.

Well, like I mentioned, if DNS is not properly configured, all bets are off. And again, if you start services before making it an OD master, you could be asking for trouble. You may be able to fix the installation, but I'd seriously consider starting over.
You might be able to fix what you have well enough to make it work, but what happens in 6 months when it gets flaky about something. You may end up wondering of there was something wrong to begin with.
So yes, I'd start over.

Unable to set Password Policy controls

When I call oracle.ldap.util.User.autheticateUser() I receive the exception "Unable to set Password Policy controls". What is the cause of this error? I was not able to find anything useful through google searches.
I am running everything inside ServiceMix. Furthermore, I am able to create a context and retrieve properties through oracle.ldap.util.User.getProperties().
Here is the stack trace:
my.company.Exception.AuthenticationException: Unable to set Password Policy controls
at my.company.OracleLdap.authenticateClient(OracleLdap.java:171)
at service.AuthenticationInInterceptor.isAuthenticated(AuthenticationInInterceptor.java:55)
at service.AuthenticationInInterceptor.handleMessage(AuthenticationInInterceptor.java:32)
at org.apache.cxf.phase.PhaseInterceptorChain.doIntercept(PhaseInterceptorChain.java:243)
at org.apache.cxf.transport.ChainInitiationObserver.onMessage(ChainInitiationObserver.java:111)
at org.apache.cxf.transport.http_osgi.OsgiDestination.doMessage(OsgiDestination.java:80)
at org.apache.cxf.transport.http_osgi.OsgiServletController.invokeDestination(OsgiServletController.java:321)
at org.apache.cxf.transport.http_osgi.OsgiServletController.invoke(OsgiServletController.java:107)
at org.apache.cxf.transport.http_osgi.OsgiServlet.invoke(OsgiServlet.java:53)
at org.apache.cxf.transport.http_osgi.SpringOsgiServlet.invoke(SpringOsgiServlet.java:48)
at org.apache.cxf.transport.servlet.AbstractHTTPServlet.handleRequest(AbstractHTTPServlet.java:179)
at org.apache.cxf.transport.servlet.AbstractHTTPServlet.doPost(AbstractHTTPServlet.java:103)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:713)
at org.apache.cxf.transport.servlet.AbstractHTTPServlet.service(AbstractHTTPServlet.java:159)
at org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java:511)
at org.mortbay.jetty.servlet.ServletHandler.handle(ServletHandler.java:401)
at org.ops4j.pax.web.service.jetty.internal.HttpServiceServletHandler.handle(HttpServiceServletHandler.java:64)
at org.mortbay.jetty.servlet.SessionHandler.handle(SessionHandler.java:182)
at org.mortbay.jetty.handler.ContextHandler.handle(ContextHandler.java:766)
at org.ops4j.pax.web.service.jetty.internal.HttpServiceContext.handle(HttpServiceContext.java:111)
at org.ops4j.pax.web.service.jetty.internal.JettyServerHandlerCollection.handle(JettyServerHandlerCollection.java:68)
at org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:152)
at org.mortbay.jetty.Server.handle(Server.java:326)
at org.mortbay.jetty.HttpConnection.handleRequest(HttpConnection.java:542)
at org.mortbay.jetty.HttpConnection$RequestHandler.content(HttpConnection.java:945)
at org.mortbay.jetty.HttpParser.parseNext(HttpParser.java:756)
at org.mortbay.jetty.HttpParser.parseAvailable(HttpParser.java:218)
at org.mortbay.jetty.HttpConnection.handle(HttpConnection.java:404)
at org.mortbay.io.nio.SelectChannelEndPoint.run(SelectChannelEndPoint.java:410)
at org.mortbay.thread.QueuedThreadPool$PoolThread.run(QueuedThreadPool.java:582)
Caused by: oracle.ldap.util.UtilException: Unable to set Password Policy controls
at oracle.ldap.util.User.authenticateUser(User.java:1243)
at my.company.OracleLdap.authenticateClient(OracleLdap.java:158)
... 29 more
Edited by: user1094798 on Feb 22, 2011 12:53 PM
Edited by: user1094798 on Feb 22, 2011 12:55 PM
Edited by: user1094798 on Feb 22, 2011 1:17 PM

I fixed it by changing the way my InitialDirContext is created.
Previously I was using:
InitialDirContext ctx = oracle.ldap.util.jndi.ConnectionUtil.getDefaultDirCtx(hostname, portNum, adminName, adminPass);
Now I'm using:
Hashtable env = new HashTable();
env.put(Context.INITIAL_CONTEXT_FACTORY, "com.sun.jndi.ldap.LdapCtxFactory");
env.put(Context.PROVIDER_URL, "ldap://" + hostname + ":" + portNum);
env.put(Context.SECURITY_PRINCIPAL, adminName);
env.put(Context.SECURITY_CREDENTIALS, adminPass);
InitialDirContext ctx = new InitialDirContext(env);
Edited by: user1094798 on Feb 23, 2011 8:29 AM

Unable to set some dates in Adobe bridge cs2

HI ALL
Our keywording team using the Adobe bridge CS2.
Kindly hep me to understand Why some dates Like
1/1/1970
1/1/1642
1/1/1890
etc .....
I unable to set in ITPC image Tab information .............
Lakhan

Hi
Thanks for revert ......
I tried with CS2 & CS3 but only specific dates like (1/1/1970) i above mentioned is still not reflecting in IPTC image info ........
Please suggest....

Illustrator won't run: "unable to set maximum number of files to be opened"

I have an intel macbook pro (core duo with 2GB ram) and a copy of purchased adobe creative suite 2. Other applications in the suite like photoshop, acrobat, etc can run on my mac without any problem. But when I try to run illustrator, it just shows an error message "Unable to set maximum number of files to be opened" and quits. I also installed a trial version of illustrator cs3 and got the same problem. Can anyone help? Thanks.
CC

Hi, I realize this is an old thread but it was unanswered and the issue has come up again in a newer thread:
http://forums.adobe.com/message/2534652
If the original poster sees this, can you reply tin the new thread and let us know if you were ever to solve this problem?
Thanks!

Service Desk Unable to set status to Customer Action and Proposed Solution

Hi Everyone,
We are unable to set a service desk issue to the status Customer Action or Proposed solution.
I have someone create a new issue in the bakend system and when I receive the issue I assign it to myself as the processor. When I try to set teh status to Customer action it is grayed out.
I have checked the following:
1. As a test I assigned My user with sap_all profile so does not appear to be authroisation related
2. The status profile has all six standard values (New, customer action, In Process, Sent to SAP, Proposed Solution, Confirmed).
3. The transaction types have been defined using the standard profiles for Text Det. Procedure, Partnet Determination Procedure, Status Profile. The Partner Function ORG is set to Sold-To-Party , The date profile is a SRV_SLA_ITEM and the Action profile is set to SLFN0001_ADVANCED. The Org Data Prof is set to a customer defined one: ZSSC000000001.
4. I have checked transaction ppoma_crm and the org structure and my user is assigned to a team lead position.
Your assistance is greatly appreciated.
Michael

Hi Michael,
please check your status profile for the "lowest status no." and "highest status no." values of the status values as Alex mentioned!
You can find this in SPRO under "SAP Solution Manager> Scenario-Specific Settings>Service Desk>Service Desk>Status Profile".
If the "high" value of the status "New" is lower than the status number of status "Customer Action" than you can not set the message from "New" to "Customer Action"!
Hope this helps,
Christoph

Unable to set the selected value for a ADF LOV

Hi,
I am developing an application using jdeveloper 10.1.3 and Struts.
I have created a ADF LOV on my JSP Page as given below:
<html:select property="lob" onchange="javascript:selectLOB(this.form)">
<html:optionsCollection label="prompt" value="index" property="lob.displayData"/>
</html:select>
When i submit the form, i am able to get the value of the selected Value in the List.
JUCtrlListBinding listBinding = (JUCtrlListBinding) formBean.get("Lob");
Row r = (Row) listBinding.getSelectedValue();
String SoLob = (String) r.getAttribute("LobLob");
But i am unable to set the selected value back in the list when i return to the form again.
I tried the following:
int x = listBinding.getSelectedIndex();
listBinding.setSelectedIndex(x);
It would be really helpful if some one could let me know what needs to be done.
Thanks,
Subashini

Gyan,
I tried with the code you suggest , its trying to set the value of a field, but my requirement is to change the property for
"Rendered" on the field so that based on search parameters we can hide result table column.
After searching online, I modified the controller code as follows
1.Created a new transient attribute (Testrender) with type "Boolean" and always updateable.
2.changed the "Rendered" property value on the field I want to hide as ${oa.PoSearchVO1.Testrender}.
3. Modified the controller code as follows :
        OAApplicationModule am = pageContext.getApplicationModule(webBean);
        OAViewObject testvo = (OAViewObject)am.findViewObject("PoSearchVO1");
        OADBTransaction txn = am.getOADBTransaction();
        if (testvo != null)
          OARow row = (OARow)testvo.first();
            if (a.equalsIgnoreCase("Approved"))
                 row.setAttribute("Testrender", Boolean.FALSE);
            else
                 row.setAttribute("Testrender", Boolean.TRUE);
        } But now when i run the page and populate the search field and click "Go" its hiding the field but throwing the following error and the search results are also bad.
Its using only the value of one search parameter but not the second one .
The search cannot be executed because the table has pending changes that would be lost. I think the vo is getting dirty when I update the transient attribute value. So I used txn.rollback ,then search is working fine but its not hiding the field.
So can you please let me know how to proceed from here ?

Unable to set homepage as google.co.in

Similar Messages

Maybe you are looking for