Unable to set Integration Broker Queue to Run

We are on PT 8.54 and HCM 9.2
I am trying to set the queue EOEN_MSG_CHNL queue to 'Run', but it is immediately resetting back to pause state. What could be the issue for it not running ?? I do not see this issue with the other queues.

Can try checking if there is anything stuck in the Transaction Retry Queue?
Main Menu > PeopleTools > Integration Broker > Service Operations Monitor > Monitoring > Asynchronous Services > Publication Contracts (Tab) > "Transaction Retry Queue" Hyperlink

Similar Messages

  • Unable to set up Express A1088

    Hi Fellow Humans
    I'm after some advice and would really appreciate any that you can offer, I recently bought an additional Airport Express to add to my network.
    My Current network is set up with 1 time capsule and 2 additional express'. I purchased an Airport Express A1088 as an additional airtunes unit for a sound bar i have. I am having some issues setting this up, I have tried the following and wonder if there is something I may've missed.
    Unable to set up using ios devices (ipad air, iphones 5s both running ios 7.1.2)
    Unable to set up using macbook air running mavericks (I am aware that apple no longer support A1088 under mavericks)
    Not registering on Windows 7/8 using original CD
    Being recognised in Windows XP on Virtual Machine using original CD, I managed to get to start setting this up but it failed.
    I am now stuck the device will not connect to my current network and keeps asking for me to insert the password I created during the failed set up. However after numerous Factory, Hard and Soft Resets still asks me for the password.
    I purchased this from a seller on ebay who had a good reputation, I have noticed that the packaging appears to be a Chinese version - is this going to be an issue?
    One of the express' on my network is an american version - apart from the plug change it was simple enought to set up.
    Before contacting the seller I hope someone here could help me.
    Thanks in advance

    Unable to set up using ios devices (ipad air, iphones 5s both running ios 7.1.2)
    Unable to set up using macbook air running mavericks (I am aware that apple no longer support A1088 under mavericks)
    This would be the case as Apple no longer supports the older 802.11g AirPorts.
    Not registering on Windows 7/8 using original CD
    This is also because Apple does not provide support for these earlier AirPorts on Windows-based computers either.
    Being recognised in Windows XP on Virtual Machine using original CD, I managed to get to start setting this up but it failed.
    I use Parallels as my Virtual Host. I find that I need to use the "Configure Other" option in order to access the AirPort when running inside a virtual machine.
    I purchased this from a seller on ebay who had a good reputation, I have noticed that the packaging appears to be a Chinese version - is this going to be an issue?
    Potentially, yes. Although all AirPorts can be adapted to work with different electrical standards, the Wi-Fi standards are most likely going to be an issue ... even in just the 2.4 GHz band. As you can imagine not all radio channels are supported everywhere.
    In the long run you would better served to send the older Express back and get yourself either a 1st or 2nd generation 802.11n Express instead.

  • Illustrator won't run: "unable to set maximum number of files to be opened"

    I have an intel macbook pro (core duo with 2GB ram) and a copy of purchased adobe creative suite 2. Other applications in the suite like photoshop, acrobat, etc can run on my mac without any problem. But when I try to run illustrator, it just shows an error message "Unable to set maximum number of files to be opened" and quits. I also installed a trial version of illustrator cs3 and got the same problem. Can anyone help? Thanks.
    CC

    Hi, I realize this is an old thread but it was unanswered and the issue has come up again in a newer thread:
    http://forums.adobe.com/message/2534652
    If the original poster sees this, can you reply tin the new thread and let us know if you were ever to solve this problem?
    Thanks!

  • "Unable to set shared config DC." when running setup /RecoverServer

    Hi guys,
    I'm hoping for a bit of assistance. I have stepped into an environment where there is one production Exchange 2010 server and one Exchange 2013 server. The Exchange 2013 server is in a unrecoverable state however it contains the domain administrators mailbox
    and therefore I cannot remove it manually. As it was a vm, I took it offline, created an identical server (name, os version(Windows 2008 R2 with latest updates), ip address etc.), installed all the prerequisite components and then ran setup /m:RecoverServer
    /IAcceptExchangeServerLicenseTerms. Everything runs through successfully until it gets to the Mailbox role: Transport service where it fails with "Unable to set shared config DC.". After some searching on Google,
    it suggests that ipv6 is disabled on the DC. We have two DC's in our environment and both have ipv6 enabled as does the exchange server. If I try to re-run the installation for the role alone, i.e. Setup /mode:install /IAcceptExchangeServerLicenseTerms
    /role:HubTransport, it fails with "The machine is not configured for installing "BridgeheadRole" Datacenter Role." 
    Any help would be greatly appreciated. 

    Thanks Amit, I understand there's no hubtransport role in 2013 but this is the error that it's throwing:
    PS D:\> .\setup /m:RecoverServer /IAcceptExchangeServerLicenseTerms
    Welcome to Microsoft Exchange Server 2013 Service Pack 1 Unattended Setup
    Copying Files...
    File copy complete. Setup will now collect additional information needed for
    installation.
    Languages
    Mailbox role: Transport service
    Mailbox role: Client Access service
    Mailbox role: Unified Messaging service
    Mailbox role: Mailbox service
    Management tools
    Client Access role: Client Access Front End service
    Client Access role: Front End Transport service
    Performing Microsoft Exchange Server Prerequisite Check
        Configuring Prerequisites                                 COMPLETED
        Prerequisite Analysis                                     FAILED
         A Setup failure previously occurred while installing the HubTransportRole r
    ole. Either run Setup again for just this role, or remove the role using Control
     Panel.
         For more information, visit: http://technet.microsoft.com/library(EXCHG.150
    )/ms.exch.setupreadiness.InstallWatermark.aspx
    The Exchange Server setup operation didn't complete. More details can be found
    in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
    Any other thoughts?

  • Integration Broker : Sending peoplesoft Data into JMS queues using  IB

    Hi All,
    I am working on integration of peoplesoft and SOA middleware. I am basically SOA middleware developer. So not much aware at peoplesoft side.
    My requirement is that need to extract information from peoplesoft and send it to third party systems(through JMS queues) and also i explored that Integration broker is going to help in such cases.
    Could you please answer my some of the questions.
    1)How can i extract information of peoplesoft. lets say i need to extract customer data from peoplesoft.
    2) steps to send above extracted customer info to third party system using integration broker.
    It would be sending information to JMS topics.
    So please let me know how we can handle JMS queues in peoplesoft.
    Please refer the related documents for outbound interface strategies.
    Thanks inadvance.
    Edited by: PraveenT2 on Jun 3, 2009 4:06 AM

    Mike,
    Biztalk do have Peoplesoft Adapter. Just configure it and use appropriate Component Interface to push or pull the data.
    Thanks,

  • [SOLVED] sudo: unable to set runas group vector: Invalid argument

    I recently made the (idiotic) mistake of overwriting my /etc/passwd and /etc/group files, although I managed to restore them from a backup.  Since restarting the machine I'm having the same issue every time I invoke sudo:
    sudo: unable to set runas group vector: Invalid argument
    I can't find any info on this error. Any ideas on where to start?
    Thanks,
    -- C. M.
    EDIT: I should also note that this is a headless machine that I'm accessing via SSH.
    Last edited by C. M. Harlequin (2014-06-15 10:35:33)

    Thanks for the reply, Amish.
    It's my understanding that the 'group vector' is a term that refers to the specific set of groups to which a user has membership, rather than a specific group named 'vector'.  Although, I could be mistaken.
    From the sudo manpage:
    The -P (preserve group vector) option causes sudo to preserve the user's group vector unaltered. By default, sudo will initialize the group vector to the list of groups the target user is in. The real and effective group IDs, however, are still set to match the target user.
    Similarly, from the sudoers manpage:
    By default, sudo will initialize the group vector to the list of groups the target user is in. When preserve_groups is set, the user's existing group vector is left unaltered. The real and effective group IDs, however, are still set to match the target user. This flag is off by default.
    But the manpages don't offer me much, I'm still clueless as to why I'm getting the error.
    EDIT: although using the -P flag seems to allow sudo to run without error
    Last edited by C. M. Harlequin (2014-06-14 18:42:39)

  • Cisco 881 integrated services router - I am unable to set up the device using the CCP New Device Setup Wizard.

    I am unable to set up the device - I get the following error:
    CCP encountered an error while executing the command :
    yourname#term len 0
    yourname#conf t
    Enter configuration commands, one per line.  End with CNTL/Z.
    yourname(config)#username ccpuser privilege 15 secret 0 ccppasswd
    yourname(config)#interface FastEthernet0
    yourname(config-if)#ip address 192.168.1.1 255.255.255.0
    % IP addresses may not be configured on L2 links.
    yourname(config-if)#no shutdown
    yourname(config-if)#exit
    yourname(config)#ip http server
    yourname(config)#ip http authentication local
    yourname(config)#ip http timeout-policy idle 60 life 86400 requests 10000
    yourname(config)#line vty 0 4
    yourname(config-line)#login local
    yourname(config-line)#transport input telnet
    yourname(config-line)#exit
    yourname(config)#line vty 5 15
    yourname(config-line)#login local
    yourname(config-line)#transport input telnet
    yourname(config-line)#exit
    yourname(config)#exit
    Fix these errors and retry.

    u cant give a ip to 2nd layer fast ethernet port.. this port is like a port of switch.
    if u want to give ip to that port.
    use that command .
    interface vlan 1
    ip address x.x.x.x x.x.x.x.
    no sh
    exit
    int fas 0
    switchport mode access
    switchport access vlan 1

  • Issue synchronizing with Integration Broker

    I need some guidance in troubleshooting XenApp integration with VMware Workspace 2.1. It seems like I have successfully installed and configured the Integration broker.
    I followed the steps from the installation guide.
    Verify PowerShell remoting.
    This sample command string applies to Citrix Server Farm 6.5.
    Get-XAApplication -ComputerName CITRIX SERVER NAME
    -> Works!
    Type http://hostname /IB/API/RestServiceImpl.svc/ibhealthcheck to verify that the Integration Broker Web application is running.
    The expected output displays.
    All ok
    Type https://hostname /IB/API/RestServiceImpl.svc/ibhealthcheck to verify that the Integration Broker Web application is running.
    The expected output displays.
    All ok
    _> Works!
    But then I added the Integration broker to the workspace portal and when I press "Sync Now" I get the message:
    Calculating sync actions.
    This takes a long time. When I look at the troubleshooting tab I see the following error:
    Failed Sync Action: Could not pull objects from Integration Broker.
    I use a self signed certificate on the Integration Broker. Any tips on how to troubleshoot, what to check?
    I'm using Windows 2012R2 with IIS 8.5. I'm not sure if that is supported.

    The IB healthcheck results seem ok indicating that the IB has been installed properly.
    We need to check if the IB is able to communicate with the XenFarm server properly and able to fetch the resources and entitlements.
    Please refer to the  Workspace Documentation - Setting Up Resources in VMware Workspace Portal > Troubleshooting Workspace Resource Configuration ->
    Citrix-Published Resources Are Not Available in Workspace.
    Please follow instructions here to check if the IB is able to contact the xen farm server. Please send us the IB and connector logs when the failure happens.

  • Integration broker

    Hi,
    We are running on CRM 8.9 PT8.49 on AIX.
    issue is IB- asynchronus outbound oneway message is stuck in working status,It ie. due to this all the other messages are queue in New status. In operation instace it going done , but in pubclication contract it is stucked in working. I am able to ping the remote node.
    we are having separate appserver domain for IB, 8 publication,and subcription handler services are running,including four psappsrv.
    I just restarted pubsub services, queues. and message is also active. this is what i found in logs for this queue
    PSPUBDSP_dflt.356556 (6) [03/06/13 00:00:03](3) (PublishSubscribe): PublicationContractDispatcher::SynchronizeQueue(): The synchronization timest
    amp for queue 'SGB_PAR_EVENTNOTIFICATIONS_MCH' was updated since the last synchronization, but no updated publication contracts were found.
    can anyone help to find the issue here

    I do not have a direct answer for you, but start here
    E-IB: Troubleshooting Subscription Contract Stuck in Status WORKING [ID 1156984.1]
    Sorry this doc is for Subscription not Publication.
    But maybe this workaround will help
    E-IB: Publication Contracts Stay in Working Status After Tools Upgrade [ID 1368868.1]
    E-IB: PeopleTools 8.48+ Integration Broker Troubleshooting Tips [ID 650476.1]
    Edited by: Hakan Biroglu on Mar 6, 2013 8:43 AM

  • Integration Broker Issue

    Hello Gurus,
    We are having strage issue with Integration Broker. When we include proxy server settings in Integration Broker properties file we are unable to ping certain nodes but when we remove Proxy server details we are able to ping nodes. We are on 8.49.08 tools.
    I would really appreciate if some one could reply on this issue.
    Thanks

    The authorization comments above are good, but they assume that the target site requires authentication. Are you able to connect to the target URL from your browser without typing a username and password? If so, then you don't need to add the authorization header.
    If you can't ping, then you have a connectivity issue. Log into your app server, open a shell prompt and type telnet <servername> <port> where <servername> is the name of your web server and <port> is the HTTP port your server is listening on (80 if no port specified in the URL). If you need a proxy server, then you can test connectivity by setting your app server's web browser proxy server to the same one listed in integrationGateway.properties and then test the URL from the app server's web browser (if it is a linux or other command line/headless app server, then try export http_proxy=http://your.proxy.server and then wget http://the.url.that/is/failing.
    Turning up the log fence in integrationGateway.properties may provide additional information as well. When set to 5, you will get information in your errorLog.html and msgLog.html file.
    For hands on help, you can open a case with Oracle Support.

  • Unable to set count for Select Query for BizTalk SQL receive port

    Hi All,
    Iam using BizTalk server 2009 classic SLQ adapter (using XML clause)for my integration to pull records from DB in to my application.
    As per the DB values iam unable to set the record count as this started giving me error below (first it worked for 820 records with select Query.and then 400 and going down with respect to multiple runs).Kindly help .
    Thanks in advance.

    Hi Abhishek,
    iam still getting the same error for 1000 records.
    after turning off PreserveBOM aswell in send pipeline.
    There was a failure executing the receive pipeline: "Microsoft.BizTalk.DefaultPipelines.XMLReceive, Microsoft.BizTalk.DefaultPipelines, Version=3.0.1.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" Source: "Pipeline " Receive Port:
    "SQLPort" URI: "SQL://XXXXX/OneC_DB/" Reason: An error occurred when parsing the incoming document: "'
    ', hexadecimal value 0x0B, is an invalid character. Line 188, position 3944.". 

  • Unable to set the selected value for a ADF LOV

    Hi,
    I am developing an application using jdeveloper 10.1.3 and Struts.
    I have created a ADF LOV on my JSP Page as given below:
    <html:select property="lob" onchange="javascript:selectLOB(this.form)">
    <html:optionsCollection label="prompt" value="index" property="lob.displayData"/>
    </html:select>
    When i submit the form, i am able to get the value of the selected Value in the List.
    JUCtrlListBinding listBinding = (JUCtrlListBinding) formBean.get("Lob");
    Row r = (Row) listBinding.getSelectedValue();
    String SoLob = (String) r.getAttribute("LobLob");
    But i am unable to set the selected value back in the list when i return to the form again.
    I tried the following:
    int x = listBinding.getSelectedIndex();
    listBinding.setSelectedIndex(x);
    It would be really helpful if some one could let me know what needs to be done.
    Thanks,
    Subashini

    Gyan,
    I tried with the code you suggest , its trying to set the value of a field, but my requirement is to change the property for
    "Rendered" on the field so that based on search parameters we can hide result table column.
    After searching online, I modified the controller code as follows
    1.Created a new transient attribute (Testrender) with type "Boolean" and always updateable.
    2.changed the "Rendered" property value on the field I want to hide as ${oa.PoSearchVO1.Testrender}.
    3. Modified the controller code as follows :
            OAApplicationModule am = pageContext.getApplicationModule(webBean);
            OAViewObject testvo = (OAViewObject)am.findViewObject("PoSearchVO1");
            OADBTransaction txn = am.getOADBTransaction();
            if (testvo != null)
              OARow row = (OARow)testvo.first();
                if (a.equalsIgnoreCase("Approved"))
                     row.setAttribute("Testrender", Boolean.FALSE);
                else
                     row.setAttribute("Testrender", Boolean.TRUE);
            } But now when i run the page and populate the search field and click "Go" its hiding the field but throwing the following error and the search results are also bad.
    Its using only the value of one search parameter but not the second one .
    The search cannot be executed because the table has pending changes that would be lost. I think the vo is getting dirty when I update the transient attribute value. So I used txn.rollback ,then search is working fine but its not hiding the field.
    So can you please let me know how to proceed from here ?

  • Unable to set kernel parameters using Reource Control

    HI,
    I'm trying to install DB2 8.2 on solaris 10.the problem i'm encountering in installation is unable to set MSGMAX and MSGMNB kernel parameters. I tried setting the new replacement parameter process.max-msq-qbytes through projects->Resource Control from the management console.but still uinable to set the parameters.
    Can anyone help me in setting the above kernel parameters.
    Its not possible to set it thru /etc/system.
    thanx
    guru

    I finally had some time to find the actual syntax for tuning process.max-msq-qbytes and process.max-msg-messages. prctl will change those paramaters for an existing process.
    As a proof of concept I changed process.max-msg-messages to a 64k. process 2221 is my shell.
    prctl -n process.max-msg-messages  -r -v 64k 2221
    bash-3.00# prctl 2221
    process: 2221: -csh
    NAME    PRIVILEGE       VALUE    FLAG   ACTION                       RECIPIENT
    process.max-port-events
            privileged      65.5K       -   deny                                 -
            system          2.15G     max   deny                                 -
    process.max-msg-messages
            privileged      64.0K       -   deny                                 -
            system          4.29G     max   deny                                 -
    process.max-msg-qbytes
            privileged      64.0KB      -   deny                                 -
            system          4.00GB    max   deny                                 -And now to make this persist across reboots...
    So long as I'm experimenting, I'll use projadd and add a new project which just includes me and not the rest of the users in the group staff.
    bash-3.00# projadd -p 115 -U testuser \
    -K "process.max-msg-messages=(priv,64K,deny)" \
    -K "process.max-msg-qbytes=(priv,64K,deny)" \
    user.me This creates the following /etc/project:
    (note the last line is all on one line in the real file minus the \.)
    placer% cat /etc/project
    system:0::::
    user.root:1::::
    noproject:2::::
    default:3::::
    group.staff:10::::
    user.me:115::testme::\
    process.max-msg-messages=(priv,64000,deny);process.max-msg-qbytes=(priv,65536,deny)After a reboot I checked the values by loging in under my user and running prctl.
    placer% prctl $$
    process: 419: -csh
    NAME    PRIVILEGE       VALUE    FLAG   ACTION                       RECIPIENT
    process.max-port-events
            privileged      65.5K       -   deny                                 -
            system          2.15G     max   deny                                 -
    process.max-msg-messages
            privileged      64.0K       -   deny                                 -
            system          4.29G     max   deny                                 -
    process.max-msg-qbytes
            privileged      64.0KB      -   deny                                 -
            system          4.00GB    max   deny                                 -
    process.max-sem-ops
            privileged        512       -   deny                                 -
            system          2.15G     max   deny                                 -
    ...Solaris 10 has different tunables and default values from 8 and 9. It's default tunables should be good for most applications per a given system's hardware. There are some great blog articles, and discussions on opensolaris.org and blogs.sun.com on tuning that explain the intent of tuning and why we shouldn't have to tune.
    Cheers,
    ~~sa

  • [CUPS] Unable to set my new CUPS server with an HP printer (solved)

    Hello,
    I come from Gentoo and I just installed my new Arch Linux server on a notebook with 2 NIC ... Now, I'm trying to set the CUPS deamon to share printer (HP DESKJET 895Cxi) for 3 workstations in my LAN. Before, it was working (printer and linux ... has never been very good...). But now, I'm not able, and it's about 1 hour I'm looking for a stupid error that I don't know if it's important or not ...
    (all is on my Wiki : http://pix-mania.dyndns.org/mediawiki/index.php/Cups)
    Here are a list of installed package : cups ghostscript gsfonts hplip
    The printer (USB) :
    (lsusb)
    Bus 002 Device 004: ID 03f0:0004 Hewlett-Packard DeskJet 895c
    (dmesg)
    usb 2-2: new full speed USB device using uhci_hcd and address 4
    usblp0: Disabling reads from problematic bidirectional printer
    usblp0: USB Unidirectional printer dev 4 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0004
    Current configuration (only change made to original configuration) :
    Listen <ip_serveur>:631
    <Location />
    Order allow,deny
    Allow From all
    </Location>
    <Location /admin>
    Order allow,deny
    Allow From all
    </Location>
    <Location /admin/conf>
    AuthType Default
    Require user @SYSTEM
    Order allow,deny
    Allow From all
    </Location>
    When starting cups service, all is fine : I can use a workstation to browse the Web Interface ... but printer seems to be not detected since it tells "No printers." when clicking on "Printers" tab. So, I go to "Administration" tab and, under "Printers", I click the "Find New Printers" and again, it says : "No printers found.".
    Not goot ... so, like I was doing with Gentoo, I click on "Add Printer" ... then, I receive a redirection to HTTPS ... click on the link (or wait) and nothing happend (timed out): web interface is broken for HTTPS ... I really got no idea why HTTPS is not working .
    After that, when updating the configuration (with vim) and restarting the service, deamon won't stop and I have to send a "kill -9" to the cupsd pid ...
    I look in log and I can just see this :
    E [09/Jan/2011:18:19:55 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    I googled for one hour, but is not more working right now ...
    Some questions :
    - the printer is not detected? Is it because of the ACLs errors ?
    - what the hell is "ACLs" for cups ? Never seen that before ...
    So, right now, I got a working HTTP but not working HTTPS, with no printer available ... very useless
    This printer is working "well" with cups, since it's an old model and it's a HP printer, so is "fully?" working on Linux ...
    Any idea on what to do/try now ?
    EDIT: after that message, I just refresh the page (I'm using Chromium) and ... magically, HTTPS was working (after accept untrusted certificate for HTTPS?) ... Then, go back to "Find New Printers" and now, it was working. Printer has been added ... Seems to be OK, but the "Print Self Test Page" doesn't work right now because of this :
    Unsupported format 'application/vnd.cups-command'!
    Current log file :
    E [09/Jan/2011:18:19:55 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    E [09/Jan/2011:18:24:48 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    E [09/Jan/2011:18:29:08 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    E [09/Jan/2011:18:36:28 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    E [09/Jan/2011:18:36:42 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    E [09/Jan/2011:18:41:06 +0100] Unknown SystemGroup "sys root lpadmin" on line 13, ignoring!
    E [09/Jan/2011:18:41:06 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    E [09/Jan/2011:18:42:24 +0100] Unknown SystemGroup "lpadmin" on line 14, ignoring!
    E [09/Jan/2011:18:42:24 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    E [09/Jan/2011:18:45:12 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    E [09/Jan/2011:18:47:32 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    E [09/Jan/2011:18:48:35 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    E [09/Jan/2011:18:49:35 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    E [09/Jan/2011:18:59:46 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    E [09/Jan/2011:19:33:06 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
    E [09/Jan/2011:19:33:06 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
    E [09/Jan/2011:19:33:06 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
    E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
    E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
    E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
    E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
    E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
    E [09/Jan/2011:19:33:37 +0100] [CGI] Unable to create avahi client: No such file or directory
    E [09/Jan/2011:19:33:37 +0100] [cups-deviced] PID 2744 (dnssd) stopped with status 1!
    E [09/Jan/2011:19:33:37 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
    E [09/Jan/2011:19:34:09 +0100] [CGI] Unable to create avahi client: No such file or directory
    E [09/Jan/2011:19:34:09 +0100] [cups-deviced] PID 2763 (dnssd) stopped with status 1!
    E [09/Jan/2011:19:39:51 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
    E [09/Jan/2011:19:39:52 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    E [09/Jan/2011:19:41:23 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    E [09/Jan/2011:19:44:49 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
    E [09/Jan/2011:19:47:16 +0100] Returning IPP client-error-document-format-not-supported for Send-Document (ipp://localhost:631/printers/HP_DeskJet_895C_USB_ES89M230MKGO_HPLIP) from localhost
    E [09/Jan/2011:19:49:36 +0100] Returning IPP client-error-document-format-not-supported for Send-Document (ipp://localhost:631/printers/HP_DeskJet_895C_USB_ES89M230MKGO_HPLIP) from localhost
    EDIT2: tried to print "Print Test Page" instead of the above ... and got these errors :
    (web interface)
    "/usr/lib/cups/backend/hp failed"
    (error_log)
    E [09/Jan/2011:20:08:31 +0100] [CGI] Unable to create avahi client: No such file or directory
    E [09/Jan/2011:20:08:31 +0100] [cups-deviced] PID 3126 (dnssd) stopped with status 1!
    D [09/Jan/2011:20:09:16 +0100] [Job 5] perl: warning: Setting locale failed.
    D [09/Jan/2011:20:09:16 +0100] [Job 5] prnt/backend/hp.c 559: dBus Connection Error (Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)!
    D [09/Jan/2011:20:09:16 +0100] [Job 5] perl: warning: Please check that your locale settings:
    D [09/Jan/2011:20:09:16 +0100] [Job 5] LANGUAGE = (unset),
    D [09/Jan/2011:20:09:16 +0100] [Job 5] LC_ALL = (unset),
    D [09/Jan/2011:20:09:16 +0100] [Job 5] LANG = "fr_FR.UTF-8"
    D [09/Jan/2011:20:09:16 +0100] [Job 5] are supported and installed on your system.
    D [09/Jan/2011:20:09:16 +0100] [Job 5] perl: warning: Falling back to the standard locale ("C").
    D [09/Jan/2011:20:09:16 +0100] [Job 5] GhostScript extra search path ('GS_LIB'): /usr/share/cups/fonts
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'job-uuid=urn:uuid:e4395221-1209-32a9-5add-30f7945eaa6b'
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option job-uuid=urn:uuid:e4395221-1209-32a9-5add-30f7945eaa6b.
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'job-originating-host-name=localhost'
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option job-originating-host-name=localhost.
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'time-at-creation=1294600145'
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option time-at-creation=1294600145.
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'time-at-processing=1294600145'
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option time-at-processing=1294600145.
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'AP_D_InputSlot='
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option AP_D_InputSlot=.
    D [09/Jan/2011:20:09:16 +0100] [Job 5] prnt/backend/hp.c 625: ERROR: 5021 device communication error!
    D [09/Jan/2011:20:09:16 +0100] [Job 5] GPL Ghostscript 9.00: Unrecoverable error, exit code 1
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Process 3154 ending: "gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=5..."
    D [09/Jan/2011:20:09:16 +0100] [Job 5] renderer return value: 1
    D [09/Jan/2011:20:09:16 +0100] [Job 5] renderer received signal: 1
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Process dying with "Possible error on renderer command line or PostScript error. Check options.", exit stat: 3
    D [09/Jan/2011:20:09:16 +0100] [Job 5] error: No such file or directory (2)
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Cleaning up ...
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3153 (KID4) with signal 15
    D [09/Jan/2011:20:09:16 +0100] [Job 5] KID3 exited with status 3
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Renderer exit stat: 3
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3153 (KID4) with signal 9
    D [09/Jan/2011:20:09:16 +0100] [Job 5]
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Closing foomatic-rip.
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Renderer process finished
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Process dying with "Error closing renderer", exit stat: 3
    D [09/Jan/2011:20:09:16 +0100] [Job 5] error: (0)
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Cleaning up ...
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3152 (KID3) with signal 15
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3152 (KID3) with signal 9
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Error closing renderer
    D [09/Jan/2011:20:09:16 +0100] [Job 5]
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Closing foomatic-rip.
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Backend returned status 4 (stop printer)
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Printer stopped due to backend errors; please consult the error_log file for details.
    D [09/Jan/2011:20:09:16 +0100] [Job 5] End of messages
    D [09/Jan/2011:20:09:16 +0100] [Job 5] printer-state=5(stopped)
    D [09/Jan/2011:20:09:16 +0100] [Job 5] printer-state-message="/usr/lib/cups/backend/hp failed"
    D [09/Jan/2011:20:09:16 +0100] [Job 5] printer-state-reasons=paused
    E [09/Jan/2011:20:14:21 +0100] [Job 5] Stopping unresponsive job!
    EDIT3: I tested the ppd from cups (and not hpijs) and got the same problem ... The latest idea was to unplug USB and plug to another USB ... and it seams to works ... Now, the test page print "fine" ...
    So, I shared the printer over my LAN, and tried to print from a workstation ... it works fine now ... when looking error_log, I can see than there is no more Ghostscript error .
    But I have a last question .. if somebody can answer ... When choosing a PPD file, I have the choice between 3 version :
    - hpijs, 3.10.9
    - hpijs, 3.10.9.11
    - hpcups, 3.10.9
    Don't know why onlyl the HPIJS got the ".11" and not any others ... I selected this one and here is what Cups say about the printer :
    HP_DeskJet_895C_USB_ES29Z231JKGO_HPLIP HP DeskJet 895C Local Printer HP Deskjet 895c hpijs, 3.10.9.11 Idle - "ready to print"
    I hope when upgrading the system, I will not get error from PPD file not found ... With my current PPD file, I get (really not sure) this error, but print is working so, it doesn't matter :
    E [09/Jan/2011:21:08:04 +0100] [CGI] Unable to create avahi client: No such file or directory
    E [09/Jan/2011:21:08:04 +0100] [cups-deviced] PID 5705 (dnssd) stopped with status 1!
    E [09/Jan/2011:21:08:09 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    Thanks for all .. hope you don't think I'm crazy ^^
    Last edited by loopx (2011-01-09 20:31:21)

    WD and their lack of support for Mavericks:
    A recent email from WD reads:
    Dear WD Registered Customer,
    UPDATE: November 1st, 2013
    As a valued WD customer we want to make you aware of new reports of Western Digital and other external HDD products experiencing data loss when updating to Apple's OS X Mavericks (10.9). WD is urgently investigating these reports and the possible connection to the WD Drive Manager, WD Raid Manager and WD SmartWare software applications. Until the issue is understood and the cause identified, WD strongly urges our customers to uninstall these software applications before updating to OS X Mavericks (10.9), or delay upgrading. If you have already upgraded to Mavericks, WD recommends that you remove these applications and restart your computer. If you have already upgraded to Mavericks and are experiencing difficulty in accessing your external hard drive, please do not save anything to the drive, disconnect the drive from your computer, and contact Western Digital Customer Service at http://support.wd.com/country/ for further assistance.
    The WD Drive Manager, WD Raid Manager, and WD SmartWare software applications are not new and have been available from WD for many years. However, solely as a precaution WD has removed these applications from our website as we investigate this issue.
    Sincerely,
    Western Digital
    Which is basically Western Digital informing you that their out-of-date utilities don’t support Mavericks.
    In any case those utilities are not the most effective. The moral of the story is: the first thing you should do after buying a WD drive is to format it as HFS Extended (Journaled) and not install ANY of their utilities but instead use reliable applications like CarbonCopyCloner or SuperDuper - or Time Machine.

  • Error while deleting events from the integration event queue

    I am trying to delete all the events from the integration event queue after reading it, like this (this is in Java):
            IntegrationEventWS_DeleteEvents_Input input = new IntegrationEventWS_DeleteEvents_Input();
            input.setDateTime("");
            input.setLastEventId("");
            try {
                 ((Default_Binding_IntegrationEventWS)onDemandStub).deleteEvents(input);
            } catch (Exception e) {
                 log.error("Deleting events from integration queue failed: ", e);
            }Alas, I get the following error message:
    Invalid method parameter(s): 'File Id'(SBL-ODS-50007)What does this mean? What is this mysterious "File Id" it supposedly gets? I don't see it anywhere in the SOAP message I'm sending and it isn't mentioned anywhere in the docs.
    Thanks in advance for any input.

    Dont keep this attributes null
    input.setDateTime(""); //Put a Default Time way in
    the past. Ex:"1/1/2000"
    input.setLastEventId(""); //pass the eventIdThe documentation states that those two are optional (although they are not nillable, for some reason). I tried to set the date to today, but I got the same result. Since setting a date is supposed to delete all events older than that date, I don't think setting it in the past will delete anything.

Maybe you are looking for

  • ITunes 9.2.1.5. will not open - ERROR "QuickTime was not found"

    After the last update I get "QuickTime was not found" Error I have uninstalled and re-installed itunes 9.2.1.5. several times but the problem persists. I have been able to open iTunes when re-installed but when syncing to the iPhone 4 even the unchec

  • IOS widgets randomly change their order

    I'm running iOS 8.1.2 on an iPhone 5s. Within a few hours of me manually editing the order in which the widgets appear, they'll start changing order. How do I get the widgets to stay in the order I want? Thanks!

  • Warning For a Document that Deviates from the Budget:

    Good Day! I want to have a warning for accounts  that I used that deviates from a monthly budget. What I did is in the General Settings>>Budget Tab, I click budget Initialization and click  WARNING", for monthly budget and also tick Purchase Orders,G

  • Form control grouping

    Hi! I have a problem with grouped form controls in Excel. This is the scenario: In Excel 2007 I create for example 2 radio buttons put within a group box and then I select all 3 controls and group them. I save and reopen the file in 2007 and all is f

  • Intermedia Search...

    I have a problem searching for subclasses. I created an object with a subobject. In this subobject I store a document. As I can see from intermedia4s log files, the files has been indexed. But I can4t find it with der search-APIs or with the WebUI. W