Unable to set permissions in KM Content

Hi all,
I got the following problem:
I'm working with an EP 6.0 SP 2.
Before the LDAP for the Portal was installed I've been creating some users from inside the Portal, with these users I was able to set permissions in the KM with no problems.
Now that the LDAP is installed, all the users I created from inside the Portal have been removed and created again in the LDAP. Now I cannot set permissions anymore in the KM. When I go to 'details > permissions' I just see the permissions already there (the Everybody group and the com.sap.....KMContentManager) but I cannot add, delete or save permissions.
What is the problem? Can be that any role is missing for my user in the LDAP? Can be that the fact that I deleted the previous user which I set the permissions the first time have caused any problem?
Could anybody help please?
Thanks very much in advanced and regards
Stella

Hi Anja,
First sorry for the delay of my answer.
The link you've attached has shown me 2 things:
1st - I have not assigned the service ACL, but checking in another Portal of my other project I see that it's also not assigned, so it shouldn't be necessary.
2nd - What I've also seen is that these system groups have to be created in User Management, and just checked with the UM Team that they are not
So I'm pretty sure the error has to be due to this.
I'll keep you informed if the error gets solved by this and of course thank with points.
Many many thanks
Stella

Similar Messages

Please Help, After Kernel panic restart failed- apple swirl(6 hrs), SafeMode-failed, SUMode-sucess. Could not unmount disk to erase. Repair permissions-multiple fail errors:unable to set permissions on... unable to set owner and group...

Please Help, I deleted an account that was the same name as the administrator but was not the administrator. Also a samsung galaxy s phone was charging through the usb port.
I closed out a program and got a message that the temp file could not be stored/saved.
Then a Kernel panic message occurred and restart was necessary.
The restart resulted in the screen with the apple logo and a continous swirl for 6+hrs,
Attempted Safe Mode start up, unsuccessful,
Single User Mode-sucess.
Ran $ fsck_hfs -rfd /dev/disk0s2 Ran several times repairs made with one which remained. something about a node.
No change in start up attempts
Started with install CD matching current OS 10.6
Ran Disk Utility Repair Permissions resulting in multiple errors:
One line/error
Warning: SUID file /////Ardagent has been modified and will not be repaired
144 lines/errors of this type of series of lines
Group permissions differ on...should be drwxr-xr-x, they are -rw-r--r-- .
permissions differ on...should be drwxr-xr-x, they are -rw-r--r-- .
unable to set owner and group...error 22: Invalid Argument
unable to set permissions on...error 22: Invalid Argument
Ran Repair Disk, result:
Error: Could not unmount disk (in red)
Ran Verify Disk, result:
The volume HD appears to be ok (in green)
Next I attempted to erase the dist to start from scratch since I have data backed up on time machine.
Error message box
Volume Erase failed
Volume Erase failed with error:
Could not unmount disk
I am looking to solve without buying DiskWarrior unless only resort.

So it looks like solved it for now I will update later. What I did was after starting from the install cd for the 10.6 system I ran from terminal ran:
diskutil disablejournaling /dev/disk0s2
diskutil disableownership /dev/disk0s2
diskutil repairPermissions /dev/disk0s2
then i closed terminal and then when to disk utility and chose to repair disk with results all was fine. Then ran repair permissions and got similar results from terminal function next I erased disk and then chose to restore from time machine and it is now restoring! yea!

Unable to set permissions for archiving

Using G5 iMac, OS 10.4.11 with iDVD 6. I have followed the instructions 1 thru 3 in help for setting permissions to archive a dvd project without any problem. However the last instruction is "Click Apply to enclosed items". I can not find anywhere to do this. Any help will be greatly appreciated. Regards from Ireland.

You are right. There is no place to "click apply to enclosed items". Just ignore that instruction, as it seems to be unnecessary. You already set your permissions by doing steps 1-3.

Unable to set permission on KM Content

I was trying to change the permissions on my CM Repository folders as Everyone has Full Access to all content.
I go to Content Administration => KM Content then click on the Context Menu and select Details. In the new window, I select Settings => Permissions.
I set the Permissions for the user Everyone to Read, click save and get a message "Permissions have been saved", however it still shows "Full Control".
Portal Netweaver 7.4 SP 05
CM Repository - Persistence Mode DB
WebDav URL: http://*************/irj/go/km/docs/documents
My user is one of the folder owners, is Content Admin and Super Admin
Any idea why I could be having this issue?

Logged an OSS call and the issue was related to duplicate records in the KMC_ACL_SUPP_PERM .
You can refer to the following:
KBA 1844853
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3138343438353326

Setting permissions in File shares content sources

Hello,
we want to crawl File Shares and set them available to searches. The set up of the crawler and the indexing is not a problem and works just fine.
The problem is that we would like to set the permissions on the results given from this content source and if possible to map the permission already on the files to the result scope. In simple words, only show the results (files) in which the AD User has
at least read privilege.
Is this possible? and if not which would be a solution of setting the permissions to this content source?
Thanx in advance!
Ioannis

That is the default behavior of SharePoint search. It will automatically read and use the file ACL.
One thing to note is that often users can see files but not read them on the file system, in which case they will be able to find the files in the search engine but not open them nor see within the files.

Unable to set Public Folder Permissions

I have created a Public Folder Mailbox and Public Folder. When I go to set permissions via the EAC, the "User" field is grayed out...when I Browse for a user I can search and select a user, but that user is not carried over to the User field where
you would set permissions. I am unable to see ANYYONE with permissions via the EAC. However, when I access my Public Folders in Outlook 2013, I and a co-worker both have "Author" level permissions.
I am an Administrator on the system and have added myself to the Public Folders role and anything else that looked even remotely related :-o
Thanks for the help!
-Nick

Hi,
We can try settings the permission on the specific folders by using the exFolders tool:
https://gallery.technet.microsoft.com/office/Exchange-2010-SP1-ExFolders-e6bfd405
Thanks,
Simon Wu
TechNet Community Support

Unable to set send-as permissions because of hundrets of duplicate permissions

hello,
we are unable to set send-as permissons to mailboxes where more than 10 users already habe send-as permissions.
when i use get-adpermission -identity "mailbox_abc" i get 4309 lines with permissions. But most are duplicates. every permission is set 31 times.
when i remove a user there are 4278 lines, when i add an user there are 4309 lines.
it seems that every account has between 1000 and 4000 permission lines
when i use the GUI i only see 10 different permissions
how can i fix it?
thankyou in advance boris

my problem are the hundreds of duplicates
this is the output
Get-ADPermission -Identity "mailbox_abc" | ?{($_.ExtendedRights -like "*send-as*") -and -not ($_.User -like "nt authority\self")} | select identity,user
Identity
User
sample.domain/MyBusiness/Users/SBSUsers/sample Mitglied           NT-AUTORITÄT\SELBST
sample.domain/MyBusiness/Users/SBSUsers/sample Mitglied           SAMPLE\gka
sample.domain/MyBusiness/Users/SBSUsers/sample Mitglied           SAMPLE\ma
sample.domain/MyBusiness/Users/SBSUsers/sample Mitglied           SAMPLE\zr
sample.domain/MyBusiness/Users/SBSUsers/sample Mitglied           SAMPLE\fh
sample.domain/MyBusiness/Users/SBSUsers/sample Mitglied           SAMPLE\MT
sample.domain/MyBusiness/Users/SBSUsers/sample Mitglied           NT-AUTORITÄT\SELBST
sample.domain/MyBusiness/Users/SBSUsers/sample Mitglied           SAMPLE\gka
sample.domain/MyBusiness/Users/SBSUsers/sample Mitglied           SAMPLE\ma
sample.domain/MyBusiness/Users/SBSUsers/sample Mitglied           SAMPLE\zr
sample.domain/MyBusiness/Users/SBSUsers/sample Mitglied           SAMPLE\fh
sample.domain/MyBusiness/Users/SBSUsers/sample Mitglied           SAMPLE\MT
sample.domain/MyBusiness/Users/SBSUsers/sample Mitglied           NT-AUTORITÄT\SELBST
sample.domain/MyBusiness/Users/SBSUsers/sample Mitglied           SAMPLE\gka
sample.domain/MyBusiness/Users/SBSUsers/sample Mitglied           SAMPLE\ma
sample.domain/MyBusiness/Users/SBSUsers/sample Mitglied           SAMPLE\zr
sample.domain/MyBusiness/Users/SBSUsers/sample Mitglied           SAMPLE\fh
sample.domain/MyBusiness/Users/SBSUsers/sample Mitglied           SAMPLE\MT
alltogether 4300 duplicate lines but only 5 different accounts
rg. borris

Unable to set browser preview options

I posted this a few days ago and didn't get any responses, so
am trying again in case I'll have better luck today. :-)
I hope someone can help because this problem, which suddenly
occured, is makign it impossible for me to do any work in
Dreamweaver and that's driving me crazy... :-0
Thanks!
I feel a bit silly about this - but for some reason I am
unable to set the browser preview options in my preferences. I'm
using Dreamweaver 8 on a Mac OX10.3.9, and trying to designate
Firefox 1.5 as my default primary browser, and Safari 1.3.2 &
IE5 as secondary options. When I first open Dreamweaver I get a
message saying 'Unable to read Preview in Browser Preference.
Please remove all browsers form the list and add them again". So I
remove them all and when I try to add them back, none of my choices
show up in the box. Then I restart and the old ones are still
there. If I try to change the check in the box that indicates
primary or secondary browsers, my program crashes. Anyone have a
clue what's going on? Thanks so much for any help...

This - file:///ether/Patricia Yenawine/images/oxblood_med.jpg
- tells me
that your local root folder is on a network shared drive. I
am guessing
that your problem stems from the fact that network
permissions/protocols are
interfering with your ability to successfully write your
cache files and
your browser preferences.
Do you have the same problem with sites that are truly local
to your
computer?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"amysue102" <[email protected]> wrote in
message
news:e48hoq$ba0$[email protected]..
> Originally posted by: Newsgroup User
> Open DW, select a site, create a new page, and insert an
image from within
> that site to insert on the page. Without saving the page
(!important)
> copy
> the code and paste it into a reply here, please.
>
> Murray,
>
> Thank you! for helping...
> I followed your direction - here's the code:
>
> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN"
> "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
> <html xmlns="
http://www.w3.org/1999/xhtml">
> <head>
> <meta http-equiv="Content-Type" content="text/html;
charset=ISO-8859-1" />
> <title>Untitled Document</title>
> </head>
>
> <body>
> <img src="file:///ether/Patricia
Yenawine/images/oxblood_med.jpg"
> width="158"
> height="115" alt="oxblood bowl" />
> </body>
> </html>
>
> May Blessings rain upon you!
>
> Amy
>

Password security - set permissions for different users

I am using Abobe Acrobat 9 Pro.
In the HELP menu, there is a security section in the contents, In the overview, it states the following:
"Each security method offers a different set of benefits. However, they all allow you to specify encryption algorithms, select the document components to encrypt, and set permissions for different users."
I would like to know how you can set permissions for different users using Password Security.
I am the only one in the company who has Acrobat 9 Pro and all others have Adobe Reader 8.
I have created a PDF file in Acrobat 9, this file is accessible to anyone with Abobe Reader. I would like to set different permissions for different users. For example, i would like certain individuals to print the document and other individuals to not be allowed to print. Can this be acheived using Password Security?
Many Thanks

I have created a PDF file in Acrobat 9, this file is accessible to
anyone with Abobe Reader. I would like to set different permissions for
different users. For example, i would like certain individuals to print
the document and other individuals to not be allowed to print. Can this
be acheived using Password Security?
No.

HT2954 Unable to set up Yahoo email account in Mail

Unable to set up Yahoo email account in Mail

Hello, any messages or errors?
Is this how you did it?
http://help.yahoo.com/kb/index?locale=en_US&y=PROD_ACCT&page=content&id=SLN4746

SEVERE:OUI-10037:Unable to set up inventory. You may not have the proper pe

Hi All,
Error during oracle 10g instalaltion in solaris 64 bit with slient mode.
SEVERE:OUI-10037:Unable to set up inventory. You may not have the proper permissions.
Thanks in advance.

Hi;
Duplicate post
SEVERE:OUI-10037:Unable to set up inventory. You may not have the proper pe
close your thread here as changing thread status to answered and keep updating your other thread
Regard
Helios

Unable to set scratch disc

I am suddenly unable to set my scratch disc to the internal G5 Jam 1Tb RAID set in my machine.
The message is "Unable to set scratch disc. The selected directory is on write-protected or non-writable media."
I have had quite a bit of trouble lately with the machine, and have just recently had the boot drive replaced, although I'm not sure that would affect my ability to set the scratch disc. I can write files over to the 1Tb RAID by simple dragging a folder, then authenticating the access, but I still get the above message when trying to set the scratch disc.
Any ideas?
Van

Are you formatted to MAC OSX Extended Journalized?
Also, do you have administrative access to your compouter? Make sure your account can write to the drive.
Ctrl-click on the drive on the desktop and choose get info.
Look at the bottom and check your ownership and permissions. It will tell you what the active account can do with that drive.

Unable to set template properties

I have a site which is based off of a responsive design (HTML5/CSS3/jQuery). I've setup a nice template for our Contribute users however I get the "Unable to set template properties" error when I would try to enter the template properties. Additionally, repeating regions don't work at all. No error, nothing. They work great with Dreamweaver, but not Contribute.
I previously had this issue with an older (non-responsive) site which was based off of a Dreamweaver CS5.5 built in template. However with that site, I would get the following error when trying to work with a repeating region, "You can't add items to repeating regions because the draft's parent template is missing or not available to users in your role. Please contact the website administrator." I was able to fix this with the following Contribute 6.5 settings.
Users can ONLY be able to create new pages from copies of select pages. I just made blank versions of the templates I wanted people to use, and just saved them in the /Templates directory.
Be sure creating new pages from site templates is turned OFF.
Be sure creating new pages from content types is turned OFF.
This is not the case with the newer site. I've tried both transitional and compatibility modes in the Contribute site settings but still nothing.
Anyone experiencing this or have any fix ideas?

Update:
Looks like I'm going to have to settle on not using nested templates. I gave it a try with on a page from a single un-nested template and both template properties and repeating regions worked.
So now I'll be including all the global code via PHP includes rather than a master Dreamweaver template. Not sure how that will effect broken link reports or global link updates but it looks like it's the only solution for now.

Unable to set group acl

I am trying to import a 3.0.6 content area into a 3.0.6 portal
schema. When I run contimp it imports the rows for the tables
correctly. When it tries to merge I receive errors such as
Unable to set group acl for: INTRANET/36/22025/FOLDER many times
with the 22025 number changing. INTRANET is the name of the
schema which I am importing the content area from.
In the portal site the new content area name is present but
there are no options for edit, properties etc and when I try to
access the content area I receive Error 30502: The folder ID
does not exist.
Thanks for any help.

Hi
I took an export of my 3.0.6 content area using contexp. I then
upgraded this portal schema to 3.0.9 which did not go
correctly. The folders and content area is there but I cannot
access the pages. I receive a 'Page not found' error. I am
therefore trying to import the 3.0.6 export into another 3.0.6
schema using contimp.
Thanks for your help.

Unable to set import lock for software component version

Hi team,
While importing object (.tpz) file into integration repository we are getting error message as below.
======
Unable to set import lock for software component version <XXXX>-COMMON,1.0 of <XXX>.com because user <userid> is currently importing data to this component
try again once user <userid> has finished importing data
=======
We checked with the user and found he is not doing any activity in fact he logged off. the developer wants to import and how do we terminate this import attement and proceed with new importing of the same object
We wan't to avoid cache refresh as this is production environment
We already performed clear SLD data cache with in the IR not for whole.
Thanks
Vijay

Hi Vijay,
Thefollowing threads speak about the locking issues with the IR objects .Hope this will help you out in resolving the issue.
http://help.sap.com/saphelp_erp2005/helpdata/EN/93/a3a74046033913e10000000a155106/content.htm
Internal lock version management : Unable to copy objects
Thanks,
Ram.

Unable to set permissions in KM Content

Similar Messages

Maybe you are looking for