Unable to set profit center
Hi Friends,
Pls help in this issue
"Using transaction FB50, post to GL account 4500610 with Profit Center MT5000V48C. However, upon saving of document, profit center was set to DUMMY. User is unable to set the profit center"
Thanks,
Santi
Hi Santi,
This one is a duplicate issue. Please close this thread.
Regards,
Abhisek
Similar Messages
-
Sap sd set profit center as mandatory field in va01
Hi guru's
here to set profit center field as mandatory in va01 i know the configuration in SD.
but this profit center field in va01 by default triggering one dummy profit center automatically.
i already set the configuration but not working bcoz of this dummy profit center.
provide the solution as soon as possible.
Best Regards
Prasad.hi,
U can use Incompletion Log else transaction variant for the same.
Goto Tcode:SHDO -
> Transaction Code=VA01->Transaction Variant=bus2032>click with processing ikon on the top -> search for the field PRCTR (profit center)-> make it requred field
hope this helps u
regards,
Arun prasad C R -
Unable to update profit center or plant code in the customer line item
Hi,
We require the profit center and plant code and division in FI
documents (Posted through billing document or through direct FI entry)
We are unable to input plant or profit center in the customer line item
while using F-21 or any other FI transaction
The plant and profit center is not appearing even in customer line item
in RV document (From SD billing)
We have made the Field status group as optional for the reconcilation
accounts.
Regards
SembianHi
Profit center / cost center are generally entered in revenue & expense line items (P&L items). Customer / vendor master and line items are balance sheet items which will not show profit / cost centers.
Regards
Neeraj -
Unable to sort profit center as ascending & Decending order in KE80 & KE30
Hi,
When viewing KE30/KE80 reports and navigating by a field such as profit centre, appear to be unable to sort in ascending/descending order.
e.g. run a KE80 Report: i.e. ZPC-9000 & i.e. variant SMKT, and execute the report click on "Profit Center" under the navigation line to navigate it out to the right. Then click on the magnify glass next to the PC number (should bring up the list of all available PCs, 1259 entries found).
From this pop-up box, unable to sort the PCs by ascending/descending order regardless of what you click.Also unable to sort the Long Text by ascending/descending order regardless of what you click
Can anyone pls help on the above issue.We have to apply any note for this???.
Thanks & Regards
ManiDear Mani,
you can sort the entries by right-clicking on the column header and chosing the sorting order in the appearing menu.
Cheers,
Daniela -
Calculation of customer payment performance by profit center
I want to calculate customer payment performance by profit center it is a report.
Caluation clue.
<b>Performance is a measure of when the payment was made versus the due date calculated by the payment terms</b>.
i want the logic to be included in the following code.
REPORT
TABLE DECLARATIONS
TABLES: BFOD_A, "FI subsequent BA/PC adjustment: Customer items
BSID, "Open Items
BSAD, "Cleared Items
BKPF, "Docuemnt Header
KNA1, "Customer Master
CEPCT, "Texts for Profit Center Master Data
CEPC, "Profit center master data table
SKB1, "G/L account master
VBFA, "Sales Document Flow
VBAK. "Sales Document: Header Data
CONTROLS: TABAGING TYPE TABLEVIEW USING SCREEN 9000.
FIELD-SYMBOLS: <COLUMN>.
Internal tables followed by types
TYPES: BEGIN OF T_TOTAL,
WAERS LIKE COEP-TWAER,
DAYS01 LIKE COEP-WTGBTR,
DAYS02 LIKE COEP-WTGBTR,
DAYS03 LIKE COEP-WTGBTR,
DAYS04 LIKE COEP-WTGBTR,
DAYS05 LIKE COEP-WTGBTR,
TOTAL LIKE COEP-WTGBTR,
END OF T_TOTAL.
DATA: V_DISVARIANT TYPE DISVARIANT,
REF_CUSTOM TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
REF_ALV_ZRPT TYPE REF TO CL_GUI_ALV_GRID.
DATA: V_SAVE(1) TYPE C,
V_DEFAULT(1) TYPE C,
V_VARIANT TYPE DISVARIANT,
V_SORT TYPE LVC_S_SORT,
V_LAYOUT TYPE LVC_S_LAYO,
V_SAVE_TABIX LIKE SY-TABIX,
V_SAVE_TIME LIKE SY-UZEIT,
V_ALV_FIELDCAT TYPE LVC_S_FCAT,
V_SAVE_INDEX LIKE SY-TABIX,
V_ROW TYPE LVC_S_ROW,
V_ROWS TYPE LINE OF LVC_T_ROW.
DATA: BEGIN OF V_HDR,
CURKY(9) TYPE C,
CURR(20) TYPE C,
COL1(20) TYPE C,
COL2(20) TYPE C,
COL3(20) TYPE C,
COL4(20) TYPE C,
TOTAL(20) TYPE C,
END OF V_HDR.
DATA: BEGIN OF V_FIELD,
NAME(15) TYPE C,
VALUE(17) TYPE C,
END OF V_FIELD.
DATA: BEGIN OF I_BFOD_A OCCURS 0,
PRCTR LIKE BFOD_A-PRCTR,
KUNNR LIKE BFOD_A-KUNNR,
BUKRS LIKE BFOD_A-BUKRS,
GJAHR LIKE BFOD_A-GJAHR,
BELNR LIKE BFOD_A-BELNR,
BUZEI LIKE BFOD_A-BUZEI,
AUGDT LIKE BFOD_A-AUGDT,
HKONT LIKE BFOD_A-HKONT,
BUDAT LIKE BFOD_A-BUDAT,
SHKZG LIKE BFOD_A-SHKZG,
DMBTR LIKE BFOD_A-DMBTR,
DMBE2 LIKE BFOD_A-DMBE2,
END OF I_BFOD_A.
DATA: I_SET_VALUES LIKE SETVALUES OCCURS 0 WITH HEADER LINE,
I_SORT TYPE LVC_T_SORT,
I_ALV_FIELDCAT TYPE LVC_T_FCAT,
I_PRCTR_COCD TYPE FCINPCA001 OCCURS 0 WITH HEADER LINE,
I_BFODA_KUNNR LIKE I_BFOD_A OCCURS 0 WITH HEADER LINE,
Begin of changes for DEVK909110
I_REPORT TYPE ZFR0ARPR_S1 OCCURS 0 WITH HEADER LINE,
I_REPORT TYPE ZPSS_ARBYPC OCCURS 0 WITH HEADER LINE,
End of changes for DEVK909110
I_FAEDE LIKE FAEDE,
I_TOTAL TYPE T_TOTAL OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF I_BKPF OCCURS 0,
BUKRS LIKE BKPF-BUKRS,
BELNR LIKE BKPF-BELNR,
GJAHR LIKE BKPF-GJAHR,
BKTXT LIKE BKPF-BKTXT,
XBLNR LIKE BKPF-XBLNR,
HWAER LIKE BKPF-HWAER,
HWAE2 LIKE BKPF-HWAE2,
END OF I_BKPF.
*... combine BSAD and BSID
DATA: BEGIN OF I_BSYD OCCURS 0,
KUNNR LIKE BSID-KUNNR,
BUKRS LIKE BSID-BUKRS,
GJAHR LIKE BSID-GJAHR,
BELNR LIKE BSID-BELNR,
BUZEI LIKE BSID-BUZEI,
AUGDT LIKE BSID-AUGDT,
BLDAT LIKE BSID-BLDAT,
BUDAT LIKE BSID-BUDAT,
HKONT LIKE BSID-HKONT,
WAERS LIKE BSID-WAERS,
ZFBDT LIKE BSID-ZFBDT,
ZBD1T LIKE BSID-ZBD1T,
ZBD2T LIKE BSID-ZBD2T,
ZBD3T LIKE BSID-ZBD3T,
XBLNR LIKE BSID-XBLNR,
REBZG LIKE BSID-REBZG,
SHKZG LIKE BSID-SHKZG,
DMBTR LIKE BSID-DMBTR,
WRBTR LIKE BSID-WRBTR,
END OF I_BSYD.
DATA: BEGIN OF I_CEPC OCCURS 0,
PRCTR LIKE CEPC-PRCTR,
KHINR LIKE CEPC-KHINR,
END OF I_CEPC.
DATA: BEGIN OF I_CEPCT OCCURS 0,
PRCTR LIKE CEPCT-PRCTR,
MCTXT LIKE CEPCT-MCTXT,
END OF I_CEPCT.
DATA: BEGIN OF I_PRCTR OCCURS 0,
PRCTR LIKE BFOD_A-PRCTR,
END OF I_PRCTR.
DATA: BEGIN OF I_KNA1 OCCURS 0,
KUNNR LIKE KNA1-KUNNR,
NAME1 LIKE KNA1-NAME1,
END OF I_KNA1.
Working Variables Declarations
*... accumulators
DATA: V_BFOD_TXNAMT LIKE BSID-WRBTR, "transaction currency amt
V_FRCURR LIKE TCURR-FCURR, "local currency
V_TOCURR LIKE TCURR-FCURR, "local currency
V_LCURR LIKE T001-WAERS, "local currency
V_CUSTTOTUSD LIKE BFOD_A-DMBE2, "customer total grp curr
V_TOTAL LIKE BPPE-WTP03, "days total grp curr
V_CURRENT LIKE BPPE-WTP03, "days current grp curr
V_TOTAL_USD LIKE BPPE-WTP03, "days total grp curr
V_TOTAL_ROW LIKE BPPE-WTP03. "total of local curr/row
DATA: V_PRCTR LIKE CEPC-PRCTR, "profit center
V_SUBRC LIKE SY-SUBRC,
V_FLAG TYPE I,
V_DPAST TYPE I, "past due days working
V_GRAND TYPE C,
V_DIFF_COLOR TYPE C,
V_MSG(50) TYPE C,
V_SAVE_PCFN(128) TYPE C,
V_EXTENSION(4) TYPE C,
V_PREV_PRCTR LIKE CEPC-PRCTR,
V_POS LIKE SY-FDPOS,
V_SAVE_BUKRS LIKE BFOD_A-BUKRS,
V_SAVE_KHINR LIKE CEPC-KHINR,
V_PERC TYPE P DECIMALS 10,
V_ZBD1T LIKE BSID-ZBD1T,
V_ZFBDT LIKE BSID-ZFBDT,
V_GROUP_CLASS LIKE RGSBS-CLASS,
V_GROUP_NAME LIKE RGSBS-SETNR,
V_GROUP_TITLE LIKE RGSBS-TITLE,
V_SETID LIKE SETHIER-SETID,
V_FILETYPE LIKE RLGRAP-FILETYPE VALUE 'DAT',
V_CNT LIKE SY-TABIX,
V_PREV_BELNR LIKE BSID-BELNR,
V_REPORT1 LIKE I_REPORT,
V_REPORT LIKE I_REPORT,
V_TABIX LIKE SY-TABIX.
Constants
CONSTANTS:
C_0H(2) TYPE C VALUE '0H',
C_0106(4) TYPE C VALUE '0106',
C_SPACE(11) TYPE C VALUE ' ',
C_USD(3) TYPE C VALUE 'USD',
C_KBRC LIKE CEPC-KOKRS VALUE 'KBRC',
C_TXT(4) TYPE C VALUE '.txt',
C_XLS(4) TYPE C VALUE '.xls',
C_RTF(4) TYPE C VALUE '.rtf',
C_PERIOD(1) TYPE C VALUE '.',
C_TODATE LIKE CEPC-DATBI VALUE '99991231'.
RANGES: R_KUNNR FOR KNA1-KUNNR. "Customer
Selection Screen Parameters and Select-options
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS: P_KHINR LIKE CEPC-KHINR.
SELECT-OPTIONS: S_PRCTR FOR CEPC-PRCTR,
S_KUNNR FOR KNA1-KUNNR,
S_BUKRS FOR BKPF-BUKRS,
S_HKONT FOR SKB1-SAKNR.
PARAMETERS: P_BUDAT LIKE BFOD_A-BUDAT OBLIGATORY.
SELECTION-SCREEN ULINE.
SELECT-OPTIONS: S_BELNR FOR BFOD_A-BELNR,
S_AUART FOR VBAK-AUART,
S_VTWEG FOR VBAK-VTWEG,
S_VBTYP FOR VBFA-VBTYP_V.
SELECTION-SCREEN ULINE.
PARAMETERS: P_AGEDY TYPE ZZAGEMULT DEFAULT '30' OBLIGATORY.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME.
PARAMETERS: P_DSVAR LIKE DISVARIANT-VARIANT.
SELECTION-SCREEN END OF BLOCK B2.
class lcl_event_receiver: local class to handle event DOUBLE_CLICK
Definition:
CLASS LCL_EVENT_RECEIVER DEFINITION.
PUBLIC SECTION.
METHODS:
MTH_PRINT_TOP_OF_PAGE
FOR EVENT PRINT_TOP_OF_PAGE OF CL_GUI_ALV_GRID.
METHODS:
MTH_PRINT_TOP_OF_LIST
FOR EVENT PRINT_TOP_OF_LIST OF CL_GUI_ALV_GRID.
PRIVATE SECTION.
ENDCLASS. "lcl_event_receiver DEFINITION
class lcl_event_receiver: local class to handle event DOUBLE_CLICK
Implementation:
CLASS LCL_EVENT_RECEIVER IMPLEMENTATION.
METHOD MTH_PRINT_TOP_OF_PAGE.
CALL FUNCTION 'Z_CA_STD_HEADER'
EXPORTING
HEADING = SY-TITLE
P_REPID = SY-CPROG
LINE_WIDTH = SY-LINSZ.
ENDMETHOD. "MTH_PRINT_TOP_OF_PAGE
METHOD MTH_PRINT_TOP_OF_LIST.
CALL FUNCTION 'Z_CA_STD_HEADER'
EXPORTING
HEADING = SY-TITLE
P_REPID = SY-CPROG
LINE_WIDTH = SY-LINSZ.
CALL FUNCTION 'Z_CA_PRINT_SELECTION_OPTIONS'
EXPORTING
P_PGMN = SY-CPROG
P_SKIP = 'X'
P_NOTOP = 'X'.
NEW-PAGE.
ENDMETHOD. "MTH_PRINT_TOP_OF_LIST
ENDCLASS. "LCL_EVENT_RECEIVER IMPLEMENTATION
DATA: REF_EVENT_RECEIVER TYPE REF TO LCL_EVENT_RECEIVER.
Selection Screen Prompt values
At Selection Screen
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_DSVAR.
DATA: LS_DISPLAY_VARIANT TYPE DISVARIANT.
Get the display variant
V_DISVARIANT-REPORT = SY-CPROG.
V_DISVARIANT-VARIANT = P_DSVAR.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
EXPORTING
IS_VARIANT = V_DISVARIANT
I_SAVE = 'A'
IMPORTING
ES_VARIANT = LS_DISPLAY_VARIANT
EXCEPTIONS
OTHERS = 3.
Load results to parameter
IF SY-SUBRC = 0 AND NOT LS_DISPLAY_VARIANT IS INITIAL.
P_DSVAR = LS_DISPLAY_VARIANT-VARIANT.
ENDIF.
*...performed when looking for values in fields
performs the drop down selection list
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_KHINR. "Profit center grp
PERFORM F_GET_S_KHINR.
Selection Screen validations
AT SELECTION-SCREEN.
IF P_KHINR IS INITIAL.
IF S_PRCTR[] IS INITIAL.
IF S_BUKRS[] IS INITIAL.
MESSAGE E000 WITH TEXT-300 TEXT-302.
ENDIF.
ENDIF.
ELSE.
IF S_PRCTR[] IS INITIAL.
PERFORM F_VALIDATE_KHINR.
ELSE.
*.. Error msg: Please enter either a Profit Center Group or a
profit center, but not both
MESSAGE E000 WITH TEXT-300 TEXT-301.
EXIT.
ENDIF.
ENDIF.
IF NOT S_AUART[] IS INITIAL.
MESSAGE E000 WITH TEXT-303.
ENDIF.
IF NOT S_VTWEG[] IS INITIAL.
MESSAGE E000 WITH TEXT-304.
ENDIF.
Event AT LINE-SELECTION
AT LINE-SELECTION.
CHECK SY-LSIND LE 1.
CHECK NOT I_REPORT-BELNR IS INITIAL.
SET PARAMETER ID 'BLN' FIELD I_REPORT-BELNR.
SET PARAMETER ID 'BUK' FIELD I_REPORT-BUKRS.
SET PARAMETER ID 'GJR' FIELD I_REPORT-GJAHR.
CALL TRANSACTION 'FB03' AND SKIP FIRST SCREEN.
CLEAR: I_REPORT-BELNR, I_REPORT-BUKRS, I_REPORT-GJAHR.
INITIALIZATION
INITIALIZATION.
START OF MAIN PROCESSING
START-OF-SELECTION.
Check aging days multiplier
IF P_AGEDY LE 0.
MESSAGE S000 WITH 'Aging Days Multiplier must be greater than zero'.
EXIT.
ENDIF.
Populate the s_prctr from a profit center group
IF NOT I_SET_VALUES[] IS INITIAL.
PERFORM F_POPULATE_PRCTR_FROM_PRCTRGRP.
ENDIF.
Build and validate prctr against cepc table
IF NOT S_PRCTR[] IS INITIAL.
PERFORM F_BUILD_I_CEPC_TABLE. "FILLS THE VALID PROFIT CTR TABLE
ENDIF.
Get base selections
PERFORM F_SELECT_DATA. "BUILD REF INTERNAL TABLES
Get additional fields and build reporting structure
PERFORM F_BUILD_I_REPORT. "BUILDS INTERNAL REPORTING TABLE
Generate ALV report
PERFORM F_WRITE_REPORT. "WRITES i_report AND RUNS CALCS
END-OF-SELECTION.
FREE: I_BFOD_A, I_KNA1, I_CEPC, I_CEPCT, I_REPORT.
Form F_DIS_MSG
FORM F_DIS_MSG USING VALUE(P_PERCENTAGE) VALUE(P_TEXT).
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
PERCENTAGE = P_PERCENTAGE
TEXT = P_TEXT
EXCEPTIONS
OTHERS = 1.
ENDFORM. " F_DIS_MSG
Form F_GET_S_KHINR
Get prompt values for Profit Center Group
FORM F_GET_S_KHINR.
PERFORM F_DIS_MSG USING 100 'Get prompt values for Profit Ctr Group.'.
COMMIT WORK.
CALL FUNCTION 'K_GROUP_SELECT'
EXPORTING
BUTTONS = 'X'
CLASS = '0H '
CRUSER = '*'
FIELD_NAME = 'RPRCTR'
SEARCHFLD = 'KBRC'
SEARCHFLD_INPUT = ' '
SEARCHFLD_REQUIRED = 'X'
SET = '*'
START_COLUMN = 10
START_ROW = 5
TABLE = 'GLPCT'
TYPELIST = 'BS'
UPDUSER = '*'
IMPORTING
CLASS_NAME = V_GROUP_CLASS
SET_NAME = V_GROUP_NAME
SET_TITLE = V_GROUP_TITLE
EXCEPTIONS
NO_SET_PICKED = 1
OTHERS = 2.
IF SY-SUBRC = 0.
P_KHINR = V_GROUP_NAME.
ENDIF.
ENDFORM. " F_GET_S_KHINR
FORM F_VALIDATE_KHINR *
FORM F_VALIDATE_KHINR.
PERFORM F_DIS_MSG USING 100 'Validate Profit Center group.'.
COMMIT WORK.
CLEAR I_SET_VALUES.
REFRESH I_SET_VALUES.
CONCATENATE C_0106 C_KBRC P_KHINR INTO V_SETID.
CONDENSE V_SETID.
CALL FUNCTION 'G_SET_TREE_IMPORT'
EXPORTING
CLIENT = SY-MANDT
FIELDNAME = 'RPRCTR'
LANGU = SY-LANGU
SETID = V_SETID
TABNAME = 'GLPCT'
NO_TABLE_BUFFERING = 'X'
TABLES
SET_VALUES = I_SET_VALUES
EXCEPTIONS
SET_NOT_FOUND = 1
ILLEGAL_FIELD_REPLACEMENT = 2
ILLEGAL_TABLE_REPLACEMENT = 3
OTHERS = 4.
IF SY-SUBRC NE 0.
E: Unable to find Profit Center Group & - please modify selection
MESSAGE E000 WITH TEXT-002 P_KHINR.
ENDIF.
IF I_SET_VALUES[] IS INITIAL.
MESSAGE E000 WITH P_KHINR TEXT-039.
ENDIF.
ENDFORM. " F_VALIDATE_KHINR
Form F_SELECT_DATA
FORM F_SELECT_DATA.
PERFORM F_DIS_MSG USING 100 'Retrieve info from SAP tables.'.
COMMIT WORK.
Build the BFOD_A internal table based on user selections
f i_cepc table is initial, it means derive all prctr under a co cd
IF S_PRCTR[] IS INITIAL.
PERFORM F_RETRIEVE_BFODA_BY_COMPANY.
ELSE.
PERFORM F_RETRIEVE_BFODA_BY_PRCTR.
ENDIF.
IF I_BFOD_A[] IS INITIAL.
*... No records fit selection criteria.
MESSAGE E000 WITH TEXT-H20.
ENDIF.
Get the text for profit center
SELECT SPRAS PRCTR DATBI KOKRS MCTXT FROM CEPCT
INTO CORRESPONDING FIELDS OF TABLE I_CEPCT
FOR ALL ENTRIES IN I_CEPC
WHERE SPRAS = SY-LANGU
AND PRCTR = I_CEPC-PRCTR.
Build an internal table of unique bfod keys for bsid and bsad
I_BFODA_KUNNR[] = I_BFOD_A[].
SORT I_BFODA_KUNNR BY KUNNR BUKRS GJAHR BELNR BUZEI.
DELETE ADJACENT DUPLICATES FROM I_BFODA_KUNNR COMPARING
KUNNR BUKRS GJAHR BELNR BUZEI.
Build BSID Internal table
SELECT MANDT BUKRS KUNNR UMSKS UMSKZ AUGDT AUGBL ZUONR GJAHR BELNR
BUZEI BUDAT HKONT BLDAT WAERS REBZG XBLNR SHKZG DMBTR
WRBTR ZFBDT ZBD1T ZBD2T ZBD3T
FROM BSID INTO CORRESPONDING FIELDS OF TABLE I_BSYD
FOR ALL ENTRIES IN I_BFODA_KUNNR
WHERE KUNNR EQ I_BFODA_KUNNR-KUNNR
AND BUKRS EQ I_BFODA_KUNNR-BUKRS
AND GJAHR EQ I_BFODA_KUNNR-GJAHR
AND BELNR EQ I_BFODA_KUNNR-BELNR
AND BUZEI EQ I_BFODA_KUNNR-BUZEI.
Build BSAD internal table
SELECT MANDT BUKRS KUNNR UMSKS UMSKZ AUGDT AUGBL ZUONR GJAHR BELNR
BUZEI HKONT BUDAT BLDAT WAERS REBZG XBLNR SHKZG DMBTR WRBTR ZFBDT
ZBD1T ZBD2T ZBD3T
FROM BSAD APPENDING CORRESPONDING FIELDS OF TABLE I_BSYD
FOR ALL ENTRIES IN I_BFODA_KUNNR
WHERE KUNNR EQ I_BFODA_KUNNR-KUNNR
AND BUKRS EQ I_BFODA_KUNNR-BUKRS
AND AUGDT GT P_BUDAT
AND GJAHR EQ I_BFODA_KUNNR-GJAHR
AND BELNR EQ I_BFODA_KUNNR-BELNR
AND BUZEI EQ I_BFODA_KUNNR-BUZEI.
IF NOT I_BSYD[] IS INITIAL.
Remove records based on selection criteria
DELETE I_BSYD WHERE
NOT BUDAT LE P_BUDAT OR
NOT HKONT IN S_HKONT.
ENDIF.
Acquire document headers
SELECT BUKRS BELNR GJAHR BKTXT XBLNR HWAER HWAE2 FROM BKPF
INTO TABLE I_BKPF
FOR ALL ENTRIES IN I_BSYD
WHERE BUKRS EQ I_BSYD-BUKRS
AND BELNR EQ I_BSYD-BELNR
AND GJAHR EQ I_BSYD-GJAHR.
Sort document lines
SORT I_BSYD BY KUNNR BUKRS GJAHR BELNR BUZEI ASCENDING.
SORT I_BKPF BY BUKRS BELNR GJAHR ASCENDING.
Create table of unique customers
SORT I_BFODA_KUNNR BY KUNNR.
DELETE ADJACENT DUPLICATES FROM I_BFODA_KUNNR COMPARING KUNNR.
Build customer table
SELECT KUNNR NAME1 FROM KNA1
INTO TABLE I_KNA1
FOR ALL ENTRIES IN I_BFODA_KUNNR
WHERE KUNNR EQ I_BFODA_KUNNR-KUNNR.
Free memory space
FREE I_BFODA_KUNNR.
ENDFORM. " F_SELECT_DATA
Form F_BUILD_I_CEPC_TABLE
build the i_cepc internal table that would populate the
valid profit centers to processed.
FORM F_BUILD_I_CEPC_TABLE.
PERFORM F_DIS_MSG USING 100 'Build the Profit Center Ref Table.'.
COMMIT WORK.
Acquire CEPC table
IF I_PRCTR[] IS INITIAL.
SORT S_PRCTR.
SELECT PRCTR KHINR
FROM CEPC
INTO TABLE I_CEPC
WHERE PRCTR IN S_PRCTR.
Sort table
SORT I_CEPC BY PRCTR KHINR.
Remove duplicate values
DELETE ADJACENT DUPLICATES FROM I_CEPC COMPARING PRCTR.
I_PRCTR[] = I_CEPC[].
Sort table
SORT I_PRCTR BY PRCTR.
ELSE.
Sort table
SORT I_PRCTR BY PRCTR.
Acquire CEPC table
SELECT PRCTR KHINR
FROM CEPC
INTO TABLE I_CEPC
FOR ALL ENTRIES IN I_PRCTR
WHERE PRCTR = I_PRCTR-PRCTR.
SOrt table
SORT I_CEPC BY PRCTR KHINR.
ENDIF.
IF I_CEPC[] IS INITIAL.
MESSAGE E000 WITH TEXT-006.
ENDIF.
ENDFORM. " F_BUILD_i_CEPC_TABLE
Form F_BUILD_I_REPORT
Build the A/R report internal table from bfod_a, bsid and bsad
It is necessary to go to BSAD/BSID to get the document currency
not present in bfod_a.
FORM F_BUILD_I_REPORT.
PERFORM F_DIS_MSG USING 100 'Build the report information.'.
COMMIT WORK.
Sort all internal tables, this is essential for later processing
SORT I_BFOD_A BY KUNNR BUKRS GJAHR BELNR BUZEI .
SORT I_BSYD BY KUNNR BUKRS GJAHR BELNR BUZEI.
SORT I_CEPC BY PRCTR KHINR.
LOOP AT I_BFOD_A.
New customer
AT NEW KUNNR.
READ TABLE I_KNA1 WITH KEY KUNNR = I_BFOD_A-KUNNR BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE I_KNA1-NAME1 TO I_REPORT-NAME1.
ENDIF.
ENDAT.
Acquire header fields
READ TABLE I_BKPF WITH KEY BUKRS = I_BFOD_A-BUKRS
BELNR = I_BFOD_A-BELNR
GJAHR = I_BFOD_A-GJAHR BINARY SEARCH.
IF SY-SUBRC NE 0.
CLEAR I_BKPF.
ENDIF.
Build base record
PERFORM F_MOVE_BASE_TO_REPORT.
Load profit center data
IF P_KHINR IS INITIAL.
IF V_PREV_PRCTR = I_BFOD_A-PRCTR.
I_REPORT-KHINR = I_CEPC-KHINR.
ELSE.
READ TABLE I_CEPC WITH KEY PRCTR = I_BFOD_A-PRCTR BINARY SEARCH.
IF SY-SUBRC = 0.
I_REPORT-KHINR = I_CEPC-KHINR.
ELSE.
CLEAR I_REPORT-KHINR.
ENDIF.
V_PREV_PRCTR = I_BFOD_A-PRCTR.
ENDIF.
ELSE.
I_REPORT-KHINR = P_KHINR.
ENDIF.
Reverse signs
IF I_REPORT-SHKZG = 'H'.
I_REPORT-DMBTR = I_REPORT-DMBTR * -1.
I_REPORT-DMBE2 = I_REPORT-DMBE2 * -1.
ENDIF.
Additional details
READ TABLE I_BSYD WITH KEY KUNNR = I_BFOD_A-KUNNR
BUKRS = I_BFOD_A-BUKRS
GJAHR = I_BFOD_A-GJAHR
BELNR = I_BFOD_A-BELNR
BUZEI = I_BFOD_A-BUZEI BINARY SEARCH.
IF SY-SUBRC = 0.
PERFORM F_FORMAT_I_REPORT_FR_BSYD.
APPEND I_REPORT.
ENDIF.
ENDLOOP.
ENDFORM. " F_BUILD_I_REPORT
Form F_FORMAT_I_REPORT_FR_BSYD
Retrieve all the information needed for reporting from BSID.
If a document has a referencing invoice (REBZG), the payment terms
and the baseline date to be used will come from the referencing
invoice.
FORM F_FORMAT_I_REPORT_FR_BSYD.
*=> get the document currency amount from bsid
I_REPORT-BLDAT = I_BSYD-BLDAT.
I_REPORT-WAERS = I_BSYD-WAERS.
PERFORM F_CONVERT_CURRENCY_FR_2_AMTS USING I_REPORT-HWAER I_BSYD-WAERS
I_BSYD-DMBTR I_BSYD-WRBTR
I_BFOD_A-DMBTR
CHANGING V_BFOD_TXNAMT.
I_REPORT-WRBTR = V_BFOD_TXNAMT.
IF I_BSYD-SHKZG = 'H'.
I_REPORT-WRBTR = I_REPORT-WRBTR * -1.
ENDIF.
V_ZBD1T = I_BSYD-ZBD1T.
V_ZFBDT = I_BSYD-ZFBDT.
*=> determine reference document (referencing invoice)
CLEAR I_REPORT-SORT.
CASE I_BSYD-REBZG.
WHEN ' '.
I_REPORT-SORT = I_BFOD_A-BELNR.
WHEN 'V'.
I_REPORT-SORT = I_BSYD-XBLNR.
WHEN OTHERS.
I_REPORT-SORT = I_BSYD-REBZG.
PERFORM F_GET_DATEPAYTERM_FR_ORIGDOC.
ENDCASE.
CLEAR I_FAEDE.
I_FAEDE-SHKZG = I_BSYD-SHKZG.
I_FAEDE-KOART = 'D'.
I_FAEDE-ZFBDT = I_BSYD-ZFBDT.
I_FAEDE-ZBD1T = I_BSYD-ZBD1T.
I_FAEDE-ZBD2T = I_BSYD-ZBD2T.
I_FAEDE-ZBD3T = I_BSYD-ZBD3T.
I_FAEDE-REBZG = I_BSYD-REBZG.
I_FAEDE-BLDAT = I_BSYD-BLDAT.
CALL FUNCTION 'DETERMINE_DUE_DATE'
EXPORTING
I_FAEDE = I_FAEDE
IMPORTING
E_FAEDE = I_FAEDE
EXCEPTIONS
ACCOUNT_TYPE_NOT_SUPPORTED = 1
OTHERS = 2.
V_DPAST = P_BUDAT - I_FAEDE-NETDT.
IF V_DPAST < 0.
I_REPORT-DPAST = 0.
ELSE.
MOVE V_DPAST TO I_REPORT-DPAST.
ENDIF.
I_REPORT-ZBD1T = V_ZBD1T.
I_REPORT-NETDT = I_FAEDE-NETDT.
Update totals
PERFORM F_BUILD_TOTALS.
ENDFORM. " F_FORMAT_I_REPORT_FR_BSYD
Form F_GET_DATEPAYTERM_FR_ORIGDOC
FORM F_GET_DATEPAYTERM_FR_ORIGDOC.
In order to go back to the original document's payment terms and
baseline date, we neeed to resort bsid/bsad to a different sort
order b-coz only these 3 fields logically matched the orig doc
SORT I_BSYD BY KUNNR BUKRS BELNR.
READ TABLE I_BSYD WITH KEY KUNNR = I_BFOD_A-KUNNR
BUKRS = I_BFOD_A-BUKRS
BELNR = I_REPORT-SORT BINARY SEARCH.
IF SY-SUBRC = 0.
V_ZBD1T = I_BSYD-ZBD1T. "payment term
V_ZFBDT = I_BSYD-ZFBDT. "baseline due date
ENDIF.
SORT I_BSYD BY KUNNR BUKRS GJAHR BELNR BUZEI.
ENDFORM. " F_GET_DATEPAYTERM_FR_ORIGDOC
Form F_WRITE_REPORT
Write A/R report summarized by profit center.
Report will be build by profit center and sum all customers
then will sum past do for profit center and catagorized
will also sum by project / wbs element.
FORM F_WRITE_REPORT.
SORT I_REPORT BY PRCTR KUNNR SORT BLDAT BELNR DPAST DESCENDING.
CALL SCREEN 9000.
ENDFORM. " F_WRITE_REPORT
Form F_POPULATE_PRCTR_FROM_PRCTRGRP
FORM F_POPULATE_PRCTR_FROM_PRCTRGRP.
LOOP AT I_SET_VALUES.
IF I_SET_VALUES-TO = I_SET_VALUES-FROM.
I_PRCTR-PRCTR = I_SET_VALUES-TO.
COLLECT I_PRCTR.
S_PRCTR-SIGN = 'I'.
S_PRCTR-OPTION = 'EQ'.
S_PRCTR-LOW = I_SET_VALUES-TO.
COLLECT S_PRCTR.
ELSE.
MESSAGE E000 WITH 'System Error, contact programmer'
I_SET_VALUES-TO I_SET_VALUES-FROM.
ENDIF.
ENDLOOP.
ENDFORM. " F_POPULATE_PRCTR_FROM_PRCTRGRP
Form F_CONVERT_CURRENCY_FR_2_AMTS
This function module will ensure proper handling of decimals
and conversion of currency. This will give you the historical
exchange rate used.
BFOD_A does not have the trans curr amt so we will get it
using: ( bsid trans curr amt / bsid loc curr amt ) *
bfod_a loc currency amt
FORM F_CONVERT_CURRENCY_FR_2_AMTS USING V_FRCURR V_TOCURR
V_OFRAMT V_OTOAMT V_NFRAMT
CHANGING V_NTOAMT.
CALL FUNCTION 'Z_CONVERT_CURRENCY_FROM_2_AMTS'
EXPORTING
FROM_CURRENCY = V_FRCURR
TO_CURRENCY = V_TOCURR
OLD_FROM_AMOUNT = V_OFRAMT
OLD_TO_AMOUNT = V_OTOAMT
NEW_FROM_AMOUNT = V_NFRAMT
IMPORTING
NEW_TO_AMOUNT = V_NTOAMT
EXCEPTIONS
OTHERS = 1.
IF SY-SUBRC <> 0.
MESSAGE E000 WITH TEXT-005.
ENDIF.
ENDFORM. " F_CONVERT_CURRENCY_FR_2_AMTS
Form F_RETRIEVE_BFODA_BY_COMPANY
FORM F_RETRIEVE_BFODA_BY_COMPANY.
Acquire BFOD_A table
SELECT PRCTR KUNNR BUKRS GJAHR BELNR BUZEI AUGDT HKONT BUDAT
SHKZG DMBTR DMBE2 FROM BFOD_A
INTO TABLE I_BFOD_A
WHERE BUKRS IN S_BUKRS.
IF I_BFOD_A[] IS INITIAL.
EXIT.
ELSE.
Remove records based on selection criteria
DELETE I_BFOD_A WHERE NOT KUNNR IN S_KUNNR OR
NOT BUDAT LE P_BUDAT OR
NOT HKONT IN S_HKONT OR
NOT BELNR IN S_BELNR OR
( NOT AUGDT IS INITIAL AND
NOT AUGDT > P_BUDAT ).
ENDIF.
Build selection option
LOOP AT I_BFOD_A.
I_PRCTR-PRCTR = I_BFOD_A-PRCTR.
COLLECT I_PRCTR.
S_PRCTR-SIGN = 'I'.
S_PRCTR-OPTION = 'EQ'.
S_PRCTR-LOW = I_BFOD_A-PRCTR.
COLLECT S_PRCTR.
ENDLOOP.
SORT S_PRCTR.
SORT I_PRCTR BY PRCTR.
PERFORM F_BUILD_I_CEPC_TABLE.
ENDFORM. " F_RETRIEVE_BFODA_BY_COMPANY
Form F_RETRIEVE_BFODA_BY_PRCTR
FORM F_RETRIEVE_BFODA_BY_PRCTR.
Acquire BFOD_A table
SELECT PRCTR KUNNR BUKRS GJAHR BELNR BUZEI AUGDT HKONT BUDAT
SHKZG DMBTR DMBE2 FROM BFOD_A
INTO TABLE I_BFOD_A
FOR ALL ENTRIES IN I_PRCTR
WHERE PRCTR = I_PRCTR-PRCTR AND
KUNNR IN S_KUNNR AND
BUKRS IN S_BUKRS.
IF I_BFOD_A[] IS INITIAL.
EXIT.
ELSE.
Remove records based on selection criteria
DELETE I_BFOD_A WHERE NOT KUNNR IN S_KUNNR OR
NOT BUKRS IN S_BUKRS OR
NOT BUDAT LE P_BUDAT OR
NOT HKONT IN S_HKONT OR
NOT BELNR IN S_BELNR OR
( NOT AUGDT IS INITIAL AND
NOT AUGDT > P_BUDAT ).
ENDIF.
ENDFORM. " F_RETRIEVE_BFODA_BY_PRCTR
Form F_MOVE_BASE_TO_REPORT
FORM F_MOVE_BASE_TO_REPORT.
I_REPORT-PRCTR = I_BFOD_A-PRCTR.
I_REPORT-KUNNR = I_BFOD_A-KUNNR.
I_REPORT-BELNR = I_BFOD_A-BELNR.
I_REPORT-BUKRS = I_BFOD_A-BUKRS.
I_REPORT-HKONT = I_BFOD_A-HKONT.
I_REPORT-AUGDT = I_BFOD_A-AUGDT.
I_REPORT-BUDAT = I_BFOD_A-BUDAT.
I_REPORT-GJAHR = I_BFOD_A-GJAHR.
I_REPORT-BUZEI = I_BFOD_A-BUZEI.
I_REPORT-SHKZG = I_BFOD_A-SHKZG.
I_REPORT-DMBTR = I_BFOD_A-DMBTR.
I_REPORT-DMBE2 = I_BFOD_A-DMBE2.
I_REPORT-HWAER = I_BKPF-HWAER.
I_REPORT-HWAE2 = I_BKPF-HWAE2.
I_REPORT-BKTXT = I_BKPF-BKTXT.
I_REPORT-XBLNR = I_BKPF-XBLNR.
ENDFORM. " F_MOVE_BASE_TO_REPORT
Module STATUS_9000 OUTPUT
text
MODULE STATUS_9000 OUTPUT.
SET PF-STATUS '9000'.
SET TITLEBAR '900'.
Launch standard ALV grid
PERFORM F_CREATE_ALV_GRID_CONTROL.
PERFORM F_LOAD_COLUMN_HEADINGS.
ENDMODULE. " STATUS_9000 OUTPUT
Module USER_COMMAND_9000 INPUT
text
MODULE USER_COMMAND_9000 INPUT.
CASE SY-UCOMM.
WHEN 'EXIT' OR 'CANC' OR 'BACK'.
CALL METHOD REF_CUSTOM->FREE.
SET SCREEN 0.
LEAVE SCREEN.
Begin of changes for Release 2 by HBE7890 - DEVK909110
WHEN 'PRIN'.
PERFORM PRINT_AGING_TOTALS.
End of changes.
ENDCASE.
ENDMODULE. " USER_COMMAND_9000 INPUT
Form F_CREATE_ALV_GRID_CONTROL
text
FORM F_CREATE_ALV_GRID_CONTROL.
Set field catalog for ALV
PERFORM F_SET_FIELDCAT.
IF REF_CUSTOM IS INITIAL.
Create ALV container
CREATE OBJECT REF_CUSTOM
EXPORTING
CONTAINER_NAME = 'ZRPT_CONTAINER'.
Create ALV grid control
CREATE OBJECT REF_ALV_ZRPT
EXPORTING
I_PARENT = REF_CUSTOM.
Adjust look and feel
PERFORM F_CHANGE_SETTINGS.
Call the ALV Build
CALL METHOD REF_ALV_ZRPT->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
IS_LAYOUT = V_LAYOUT
IS_VARIANT = V_VARIANT
I_SAVE = V_SAVE
I_DEFAULT = V_DEFAULT
CHANGING
IT_SORT = I_SORT
IT_OUTTAB = I_REPORT[]
IT_FIELDCATALOG = I_ALV_FIELDCAT[].
Create print top of page
CREATE OBJECT REF_EVENT_RECEIVER.
SET HANDLER REF_EVENT_RECEIVER->MTH_PRINT_TOP_OF_PAGE
FOR REF_ALV_ZRPT.
Create print top of page
CREATE OBJECT REF_EVENT_RECEIVER.
SET HANDLER REF_EVENT_RECEIVER->MTH_PRINT_TOP_OF_LIST
FOR REF_ALV_ZRPT.
ENDIF.
ENDFORM. " F_CREATE_ALV_GRID_CONTROL
Form F_CHANGE_SETTINGS
text
FORM F_CHANGE_SETTINGS .
Set layout parameters
V_LAYOUT-GRID_TITLE = 'A/R by Profit Center'.
V_LAYOUT-SEL_MODE = 'A'.
V_LAYOUT-INFO_FNAME = 'LINECOLOR'.
V_LAYOUT-CWIDTH_OPT = 'X'.
V_LAYOUT-NO_MERGING = 'X'.
V_LAYOUT-NUMC_TOTAL = 'X'.
V_DEFAULT = 'X'.
V_SAVE = 'A'.
Set display variant
V_VARIANT-REPORT = SY-REPID.
IF P_DSVAR NE ''.
V_VARIANT-VARIANT = P_DSVAR.
ENDIF.
ENDFORM. " F_CHANGE_SETTINGS
Form F_SET_FIELDCAT
text
FORM F_SET_FIELDCAT .
Set field catalog for ALV
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
I_STRUCTURE_NAME = 'ZFR0ARPR_S1' "DEVK909110
I_STRUCTURE_NAME = 'ZPSS_ARBYPC' "DEVK909110
CHANGING
CT_FIELDCAT = I_ALV_FIELDCAT
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3.
Override any attributes
LOOP AT I_ALV_FIELDCAT INTO V_ALV_FIELDCAT.
IF V_ALV_FIELDCAT-FIELDNAME EQ 'NAME1'.
MOVE 'Customer Name' TO: V_ALV_FIELDCAT-REPTEXT,
V_ALV_FIELDCAT-SCRTEXT_L,
V_ALV_FIELDCAT-SCRTEXT_M,
V_ALV_FIELDCAT-SCRTEXT_S.
ENDIF.
IF V_ALV_FIELDCAT-FIELDNAME EQ 'SORT'.
MOVE 'Documentation' TO: V_ALV_FIELDCAT-REPTEXT,
V_ALV_FIELDCAT-SCRTEXT_L,
V_ALV_FIELDCAT-SCRTEXT_M.
MOVE 'DocRef' TO V_ALV_FIELDCAT-SCRTEXT_S.
ENDIF.
MODIFY I_ALV_FIELDCAT FROM V_ALV_FIELDCAT.
ENDLOOP.
ENDFORM. " F_SET_FIELDCAT
Form F_BUILD_TOTALS
text
FORM F_BUILD_TOTALS .
DATA: V_DAYS TYPE I,
V_INDEX(2) TYPE N.
CLEAR I_TOTAL.
Build total line
MOVE I_REPORT-HWAER TO I_TOTAL-WAERS.
MOVE I_REPORT-DMBTR TO I_TOTAL-TOTAL.
DO 5 TIMES.
V_DAYS = ( SY-INDEX - 1 ) * P_AGEDY.
V_INDEX = SY-INDEX.
IF I_REPORT-DPAST LE V_DAYS.
CONCATENATE 'I_TOTAL-DAYS' V_INDEX INTO V_FIELD-NAME.
ASSIGN (V_FIELD-NAME) TO <COLUMN>.
<COLUMN> = I_REPORT-DMBTR.
EXIT.
ELSEIF SY-INDEX EQ 5.
CONCATENATE 'I_TOTAL-DAYS' V_INDEX INTO V_FIELD-NAME.
ASSIGN (V_FIELD-NAME) TO <COLUMN>.
<COLUMN> = I_REPORT-DMBTR.
EXIT.
ENDIF.
ENDDO.
COLLECT I_TOTAL.
ENDFORM. " F_BUILD_TOTALS
CO-PA has all the information you need...
Profitability Analysis is that part of CO where operations will access its performance factors and profitability statements contain margins, standard cost variance, sales information, allocations and other related profit or loss data. This module helps analyze profitability of customers, markets and products at various levels of contribution margins. Profitability is measured down to the SD billing document line and is adjusted periodically against standard costs and other costs.
It has 2 methods of approach :
Costing based Profitability Analysis - This is primarily designed to let you analyze profits quickly for the purpose of sales management.
Account based Profitabilty Analysis - This type of Profitability Analysis enables you to reconcile cost and financial accounting at any time using accounts.
Guess, the second approach is what you are looking for... -
Grey out profit center when line item is entered in VA01
hi all,
i have to set profit center in display mode when line item is entered in sales order processing, please tell me the exist where i can put my code.
please reply
with regards,
balahi bala,
Please check this,
u can create enhance point in that routine.
first click on enhancement button (shift+F4) then
use menu path edit->enhancement operation->show implicit enhancement operation
after that it start showing line like that in USEREXIT_PRICING_PREPARE_TKOMP
-> """"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
right click on the line and enhancement implimentation and create, it will create enhancement point at that particular place.
use this coding in ur enhancement spot
IF ( SCREEN-GROUP2 = 'LOO'
AND SCREEN-NAME = 'VBAP-PRCTR' ).
SCREEN-INPUT = 0.
ENDIF.
it will solve ur problem.
let me know, if solved
Yogesh -
Cost Element and Profit center accounting
hi to all,
in my production system, most of PL accouts have been created as cost element. but some revenue and COGS accounts have not been created even there existed transaction data.
now i want to create all PL accounts as cost elements. revenue (category is 11) and COGS(category is 12) accounts link with Logistic, so i am not sure the effluence in the auto posting with Logistics. if there is any problem?
by the way, after create all PL accounts as cost element, i want all the transaction data for PL account can flow into profit center accounting because i want to generate profit center PL report. what shoul i do? set the profit center field mandatory or set Substitution? or some more reasonable solutions ?
expect your valuable suggestion/
thanks in advance
IvanHi,
After creating P/L accounts as cost element when ever you will post to that account it will ask for posting to true CO object it can be a real cost center, real internal order or profitability segment etc.
If you want all P/L account to post to profit center, you can set profit center field mandatory and you can enter profit center manually.If your CO account assignment is cost center System can also derive profit center from cost center master data.and OKB9 is more option which u can make use of. -
Profit center is not read in BAPI_ACC_DOCUMENT_POST
Hi Experts,
I have enabled profit center for an expense account,
in BAPI_ACC_DOCUMENT_POST it keeps stated the error that profit center is not read. Is there any other way to use this BAPI with the profit center enabled for the expense account?Hi Anup,
The error does not reflect on BAPIACGL09-PRCTR. As i also activated the AP's special GL account to be profit center required. The error reflects in the special GL acct, unable to read profit center for the special GL account.
Error msg: Field Profit Ctr is a required field for G/L account FNW 15530
GL 15530 is the special GL for AP account: 200994 -
Profit center an optional entry for Movement Type
Hi All,
I have the need to make changes on the Field Status for the Movement Type 561 to set profit center to be an optional entry.
Right now when I go to MB1C and enter the movement type and the plant, it asks for a profit center since its a req entry. I want to change that to optional. Please help.
Thanks
RFicoHi
1. Go to SE38 - Program RM07CUFA
2. Enter Movement Type 561 - GL Account as your stock account
3. Execute
4. It will show you 2 columns - Field Status as per MM and FI
5. Make Profit center as optional there for MM...
6. Pr Ctr as optional for FI can be made from OBC4
Regards
Ajay M -
ERP Sales Order with Profit Center value mandatory in ECC side!
Hi Experts,
I'm working with a scenario using SAP CRM 7.0 and ECC 6.0 EHP4, using ERP Sales Order and ERP Quotation.
The sales order transaction type in ECC side is set up to use profit center at item level as mandatory and I can't find this attribute at Item Details in CRM Webclient. I can't save my order, because this error and the AB Incompletion Log always shows this error.
Any ideas? Is it possible set profit center value in CRM?
Best Regards
Heber OlivarHi Heber!,
I hope you are doing well.
We have the same issue, please could you share us how did you resolve this issue?
We have SAP CRM 7.0 EHP2 and SAP ECC 6.0 and for the creation to ERP Orders correctly in SAP CRM is necessary the profit center value.
Thanks in advance.
Best Regards! -
How to make the Profit Center Field Mandatory in Cost center Master Data
Dear All,
Please let me know how to make the Profit Center Field mandatory in Cost Center Master Data as well as my Internal Order Master Data?
Thanks in advance!
Regards,
Rajeswari Shankar.Hi Rajeswari,
You can modify message number KS096 to "Error" via OBA5. Thus, the users would no be able to save a cost center without entering a profit center. (Depending on your release you can make KS096 modifiable by implementing note 486781.)
Concerning the internal orders (transaction KO01), you can run KOT2 and set Profit center field as required entry in "change field selection" section.
Regards,
Greta -
Profit Center Assignment on material master
Hi,
We have not assigned profit centers on materials and there are line items that are going to unassigned or dummy
We are into utility industry. We have 3 Profit centers Headquarters, Water Operation and Power Operation.
We have spare parts and other materials which are used for maintaining equipment or service orders in water operation and also power operation.
So to which profit center we need to assign these materials which are procured and used for water operation and power operation.
Just not sure which of the 2 profit centers we need to assign the materials to.
Thanks,
Rajan.Hi,
In standard you can assign one profit center in material master. But you can maintain different profit centers for same material but maintained in different plant.
In Finished goods case you can set Profit center substitution in 0KEM.
Hope this clarifies your doubt.
Regards,
Sany.. -
Unable to create the Profit center groups
Hi,
We have created new company codes in R3Dev and also created the
validation rules for the same. We have assigned the Set ID's to the
validation rules. These Set ID's gets created when profit center groups
are created for the new company codes.
We have transported the company code configuration settings and the
validation rules to R3QA.
Now in R3QA, when I try to create the profit center groups in KCH5N for
the new company codes, it says "the group already exists".This is
caused due to the SET ID's which also got transported along with
validation rules. I have checked the table 'SETHEADER" which shows the
SET ID's for the new company codes.
Could you please a solution to resolve this issue.
Thanks
RakeshHi Mohan,
Since Set Id's have moved to quality along with vaidation rules, I am to create the profit center groups, as it says the group already exists. I believe the set Id's need the master data maintained in R3Q, before they are transported. Since this is not maintained, with the transport, the data is sitting for Set Ids at the table level (Table: SETHEADER), because of which I am to unable to create the profit center groups.
Thanks,
Rakesh -
Profit center is missing in profit center report , i'm forgot set 1KEF
Dear Expert,
I created a transaction , but the profit center document is not created automatically / missing. because I'm forgot to maintain Set Control Parameters for Actual Posting in 1KEF.
Please help.. How to posting historical data profit center accounting before i set in 1KEF?
Thanks
PrabowoHi Werner,
thanks for your advice.
but, i can't run tcode 1KE8, SAP give this massage.
"No relevant document lines exists
Message no. KM830
Diagnosis
This document is not posted to Profit Center Accounting.
There are no relevant lines in the document. Possible reasons for thisare:
Document contains only balance sheet accounts
Document contains only pure profit/loss accounts with no assignment to a profit center
Elimination of internal business (the posted objects have the same profit center)
Procedure
Check whether you are processing the right document"
Please Help,
BR
Prabowo -
How to set default value in Profit Center field of Tcode F-02.
Hi!
Is it possible to set a default value for 'Profit Center' field in t.code F-02? Is there a way wherein the value will be copied in reference to the entered Business Area?
For example, if during parking/posting of document, user input a value of 300 in the Business Area field, the system will automatically put 300 in the Profit Center field. Is there a way to do this?
Hoping for your feedback.
Thanks,
AprilHi
Using the substitution this can be achieved.
TC:GGB1
Step-1: Prerequiste select the Company code for which this requirement is needed
Step-2: In Substitution field, select the the "Profit center" field on selection of the field - system'll asks you - How would you like to substfield BSEG-PRCTR ? with the 3 options
i.constant value
ii.exit
iii.Field-Field assignment
Select the 3rd option on selecting 3rd option before going to save that substitution it'll ask you to input which field should input the field BSEG-GSBER:Business area
Step-3: activate the above substitution in TC:OBBH
With the above settings whenever any value inputs in Business are field then the same value will be substituted in the Profit center field.
Note: Make sure in all FSG - business area & profit center having the field status optional
Can you tell me onething why this requirement has came ? Is business area and profit center are same in number and prupose
regards
Ramana
Edited by: Ramana on Jan 8, 2008 9:33 AM
Maybe you are looking for
-
I work for an auditing firm and we have recently gone paperless with our audit documentation. We have our files saved on a server and multiple people can access the same file at one time. We noticed that Acrobat does not give an message notifying a u
-
IPhone tethering xp network disconnected
Hello iTunes 10 successfully installed. iPhone drivers in stall ok and iTunes detects. Usb tethering on. No tethering notification on phone. Windows xp dispays " network cable disconnected" for the tethering connection in the connections panel in xp.
-
Since in the Pictures and Videos section i didn't received an answer... After installing Amber i can't open the old Smart Shoot pictures anymore. I've checked and even if the photos and the linked .NOP files are there (on the sd card) the option to
-
Why have some users no connection in my App?
Hi I have another problem. Some users have problems when they open my App. The App needs a network connection and starts with this code to check if it has network connection: //Check network connectivity Boolean success; Boolean _isDataSourceAvailabl
-
Imac 8.1 OS X 10.5.8 reboot loop at startup
I have an Imac 8.1 running OS X 10.5.8 After I had shut it down yesterday I'm doing a start-up end it ends up in loop of rebooting. So I hear the chime it loads for a while (apple plus loader), then the screen goes black and restarts again, and that