Unable to set property Refresh Completed Items for UWL system

Hello Experts,
We are on NetWeaver 7.40 SP2 and UWLJWF version is 1000.7.40.2.0.20130411234700.
We have configured a system object with system alias SAP_ECC_HumanResources pointing to the backend ECC system.
I am creating a UWL WebFlowConnector system with this same system alias in the UWL Administration page to fetch ABAP Workflow workitems from the backend and display those in the portal UWL.
When I try to check the checkbox for the Refresh Completed Items: property and click Save it shows me an error message saying Could not connect to back end SAP_ECC_HumanResources to check if it supports direct custom retrieval feature.
I have already followed the steps for Prerequisites for Enabling Refresh of Completed Items and Activation in Back-end System mentioned in the link Enabling Refresh of Completed Items but still getting the above error.
I have also tried restarting the UWL service as given here (UWL) Error while configuring the Refresh of Completed Items Mechanism
Can anyone give any suggestions what else needs to be checked for this property to work for the UWL system?
Regards,
Saurabh
Message was edited by: Vera Gutbrod

Hello Experts,
I have managed to resolve this problem. The RFC Destination configured for UWL WebFlowConnector had some problems and it was not able to ping to the backend system. I got this RFC Destination re-configured and then restarted the UWL service and following this I am now able to set the Refresh Completed Items property for the UWL WebFlowConnector system.
However now when I am trying to set a value of 30 seconds in the Delta Pull Channel Refresh Period (in Seconds): property and saving the change, I am getting a warning message The backend of system SAP_ECC_HumanResources is not configured for optimized delta pull.
How do I go about setting this value for the delta pull refresh?
Regards,
Saurabh

Similar Messages

Unable to set monthly recurring calendar items for...

Due to the inability to sync Thunderbird calendar with my 2630, I have resorted to re-entering appointments into my phone via PC-Suite. The only problem is, I have a number of recurring monthly appointments that occur on say 1st Monday of the month etc, but PC-Suite insists on only adding them based on the day of the month the initial entry - ie 5th of each month. Is there a way I can alter the way such recurring events are handled? Any ideas appreciated

Konstantinov12 wrote:
My Yahoo calendar has stopped sending reminders altogether. This happened about a week ago but I can't be definite. I've tried to feedback this information to Yahoo but have had no success. I keep going round in circles. I can't even work out how to create a message on this forum as the Help says "go to the board on which you want to post a message" but doesn't tell you what a board is or where to find them. If anyone knows, please help.
if you go here which is start of community http://community.bt.com/ then the 'boards' are shown in dark blue - 4 under broadband, vision, phone etc. when you want to start your own subject then go to 'new message' at start of board on which you want to post. there are forum guidlines which will help
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Unable to set volume attribute "min-autosize" for volume

We have a TDP volume(destination), that is in snapmirrored state from 7Mode to cDOT.While trying to resize/increment the volume size by say 100g we get the following error. clusterName> volume size volumneName -vserver vserverName +100gWarning: Volume "vserver:volumeName" is a SnapMirror destination volume. The Filesystem Size for this volume is derived from its source and cannot be changed. The specified size will be used as the Volume Size.
Do you want to continue? {y|n}: y Error setting size of volume "vserver:volumeName". Unable to set volume attribute "min-autosize" for volume
"volumeName" on Vserver "vserverName". Reason: Volume 'volumenName' is a snapmirrored volume.
vol size: Flexible volume 'volumeName' size limit set to 8022664413184. Any idea ? Volumes autosize mode is false.

Hi I am not trying to change any setting. I am trying to increase the size of the volume. I understand in case of a Snapmirrored volume the fs_fixed options is ON.But one can always increase the actual volume size using vol size command. Even if I increase the size on ONTAP on the file system side it will show as the size same as source. I understand that. So my question is why is it prevenitng me from increasing the size. RegardsAdai

I am unable to set up my microsoft outlook for email

I am unable to set up Microsoft Outlook on my I pad. After I put in my email address for outlook it asks for a password and it will not take my apple password. Am I supposed to use something else?

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694http://support.apple.com/kb/ht1694
iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
http://support.apple.com/kb/TS1944http://support.apple.com/kb/TS1944
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.htmlhttp://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
How to Sync Contacts with Your iPad Using iTunes
http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.htmlhttp://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621http://support.apple.com/kb/ts2621
iCloud: Create a group and add contacts to it
http://support.apple.com/kb/PH2667http://support.apple.com/kb/PH2667
eMail Groups - You can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

How to complete refresh publication item for single client

Is there any method how to force one client to completely refresh one of the publication items? I found just the ConsolidatorManager.completeRefresh(clientid, publication) which seems to force the client to refresh all publication items of a publication...

i am using 2 internal table.
my pgm code :
SELECT
             VORNR
             ARBPL
             FROM S022 INTO CORRESPONDING FIELDS OF TABLE ITAB
                                                          WHERE AUFNR = ITAB1-AUFNR.
        SORT ITAB BY VORNR.
        LOOP AT ITAB.
            SELECT SINGLE LTXA1
                                FROM AFVC INTO CORRESPONDING FIELDS OF ITAB
                                                                   WHERE VORNR = ITAB-VORNR
                                                                          AND AUFPL = ITAB1-AUFPL.
       ENDLOOP.
In SMARTFORM
TABLE-MAIN
LINE ITEM - COLUMN : I am selecting material, quantity, Unit individually in coding part.
SELECT MATNR
        BDMNG
        ERFME
         FROM RESB INTO CORRESPONDING FIELDS OF TABLE MTAB
                                        WHERE VORNR = itab-vornr
                                          AND AUFNR = PRN.
LOOP AT MTAB.
      SELECT SINGLE MAKTX
                    FROM MAKT INTO CORRESPONDING FIELDS OF MTAB
                                               WHERE MATNR = MTAB-MATNR.
endloop.
other than this four column further 6 columns also available in Main table, those entries are Manual .
in program i tried to use 2 internal table like nested loop using count.
i am getting last item only, not all line item.
i hope now clear about my problem.

How to configure a sub view for completed items in uwl?

I overwrote the standard view with:
<View name="WorkItemsCompletedView" selectionMode="NONE" width="98%" supportedItemTypes="uwl.completedtask" columnOrder="subject, completedDate" sortby="completedDate:descend" tableDesign="ALTERNATING" visibleRowCount="10" headerVisible="yes" queryRange="Last_3_Months" tableNavigationFooterVisible="yes" tableNavigationType="CUSTOMNAV" actionRef="" refresh="300" dueDateSevere="0" dueDateWarning="0" emphasizedItems="none" displayOnlyDefinedAttributes="yes" dynamicCreationAllowed="yes" actionPosition="top" referenceBundle="completed_tasks">
 <DisplayAttributes>
 <DisplayAttribute name="completedDate" type="date" width="" sortable="yes" format="medium" referenceBundle="completed_date" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes"/>
 <DisplayAttribute name="decision" type="string" width="" sortable="yes" format="default" referenceBundle="decision" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes"/>
 </DisplayAttributes>
 <Actions>
 <Action name="refresh" reference="refresh"/>
 </Actions>
 </View>
I tried to create a subview with the following configuration:
<View name="MyViewCompleted" selectionMode="NONE" width="98%" supportedItemTypes="uwl.completedtask.webflow.TS91300001" columnOrder="statusIcon, subject, creatorId, createdDate,LIEFERANT,BETRAG,BELNR,BESTELLUNG" sortby="priority:descend, dueDate:ascend, createdDate:ascend" tableDesign="ALTERNATING" visibleRowCount="10" headerVisible="yes" tableNavigationFooterVisible="yes" tableNavigationType="CUSTOMNAV" actionRef="" refresh="300" dueDateSevere="86400000" dueDateWarning="259200000" emphasizedItems="none" displayOnlyDefinedAttributes="no" dynamicCreationAllowed="yes" actionPosition="top" referenceBundle="completed_tasks">
 <Descriptions default="Eingangsrechnung Ansicht">
 <ShortDescriptions>
 <Description Language="en" Description="Eingangsrechnung View"/>
 <Description Language="de" Description="Eingangsrechnung View"/>
 </ShortDescriptions>
 </Descriptions>
 <DisplayAttributes>
 <DisplayAttribute name="priority" type="user" width="10" sortable="yes" format="default" referenceBundle="priority" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes">
 <Menu>
 <MenuItem name="Low" actionRef="priorityLow" referenceBundle="menu_priority_low"/>
 <MenuItem name="Normal" actionRef="priorityNormal" referenceBundle="menu_priority_normal"/>
 <MenuItem name="High" actionRef="priorityHigh" referenceBundle="menu_priority_high"/>
 <MenuItem name="VeryHigh" actionRef="priorityVeryHigh"/>
 </Menu>
 </DisplayAttribute>
 <DisplayAttribute name="KONTIERUNG" type="string" width="10" sortable="yes" format="medium">
 <Descriptions default="Kontierung"/>
 </DisplayAttribute>
 <DisplayAttribute name="LIEFERANT" type="string" width="10" sortable="yes" format="medium">
 <Descriptions default="Lieferant"/>
 </DisplayAttribute>
 <DisplayAttribute name="BETRAG" type="string" width="10" sortable="yes" format="medium">
 <Descriptions default="Betrag"/>
 </DisplayAttribute>
 <DisplayAttribute name="BELNR" type="string" width="10" sortable="yes" format="medium">
 <Descriptions default="Belegnummer"/>
 </DisplayAttribute>
 <DisplayAttribute name="BESTELLUNG" type="string" width="10" sortable="yes" format="medium">
 <Descriptions default="Bestellung"/>
 </DisplayAttribute>
 </DisplayAttributes>
 <Actions>
 <Action name="refresh" reference="refresh"/>
 </Actions>
 </View>
I thought, that the referenceBundle would handle the creation of a subview, but though i have a item of this type in the completedtask view i have no sub view.
Any ideas?
regards,
Jens

FYI - referenceBundle refers to Description Bundles - i.e. it is to do with text descriptions only and does not create a subview.

Unable to set-up sybase connection pool for wls6.1

Hi All,
I am trying to set-up sybase connection pool in wls6.1 using the supplied jConnect driver (don't know the version of the driver). In diff places I am seeing diff opinions about the settings. It is really frustrating because BEA doc shies away from documenting just the sybase details although it provides details about Oracle, informix and SQL Server.
I just want to know these
1. the xml string for the connection pool
2. which config file should have it (web.xml or config.xml or something else?)
thanks a ton in advance
~rakesh

Hi,
I've already solve the problem. I did the following:
set the Url to be: jdbc:oracle:thin:@hostname:port:SID
set username
set password
add oracle.jdbc.drivers.OracleDriver into the JVM options -Djdbc.drivers
restart the server
test the connection
it works :)

Unable to set up a dual boot for Snow Leopard and Lion

I'm running an early 2011 MacBook Pro. I originally ran this machine with Snow leopard for quite a while. I've got 8 GB RAM and lots of free space on my hard drive. I upgraded to Lion and it works well. But I want to boot to Snow Leopard from an external drive to run some old Rosetta apps. However, I couldn't run the Snow Leopard installation disk on the Lion Machine. When I tried to boot to the installation disk, I would get a beeping sound during startup, three beeps in a row - repeating, and it would not boot. So I connected the external to another machine running Snow Leopard and I installed a new version of Snow Leopard on the external drive. But my Lion machine will not boot from that external. I am able to select the Snow Leopard drive in the Start Up Disk pane in the prefs. But when I restart, I just get the three beeps. I must be missing something here. Any help would be appreciated.

Not in cases when the computer successfully boots to one OS but produces three beeps when an attempt is made to boot it to another. If it really was a RAM problem that serious, the computer wouldn't get as far as checking the OS version, and it has no problems booting Lion. In the event of a minor RAM problem, it wouldn't produce three beeps like that at all.
(67955)

Unable to set Canadian French CSA layout for external keyboard when language set to English

I use both French and English on my iPad. I now have an external keyboard, with French Canadian CSA layout. However, the Canadian French CSA layout for the hardware (external) keyboard is not available when using English as an input language. Many other layouts are available (e.g., US, Spanish ISO, etc.), but not this one. French Canadian CSA layout is available with French as the input language.
How can I add Canadian French CSA hardware keyboard layout when using English as the input language?

It's not possible for users to add keyboard layouts to any iOS device. All you can do is ask Apple to add it in a future update:
http://www.apple.com/feedback/ipad.html

Unable to set up free trial software for photoshop CS4

Hello
I have downloaded the above software but when i try to set up i get a error message saying that acrobat com exe is currently running and to quit or retry. i am not currently running this programme and have checked my computer which shows no programmes running. how do i correct this to allow me to access this software. have tried quit/retry on numerous occasions but each timne get same message
i have tried installing as administrator also and still get same message
i run a dell inspiron laptop that uses vista software if this helps
please could you assist
many thanks
Shirley

Not in cases when the computer successfully boots to one OS but produces three beeps when an attempt is made to boot it to another. If it really was a RAM problem that serious, the computer wouldn't get as far as checking the OS version, and it has no problems booting Lion. In the event of a minor RAM problem, it wouldn't produce three beeps like that at all.
(67955)

Mulltiple Rule Sets in GRC 10.0 for one System

Hi All,
We do have 2 different companies working on one system and by that 2 different rule sets that are applicable.
Due to that we are facing different problems we don't know how to solve yet but lets start with the first one dealing with the rule set that should be used in the access request.
We want to determin which rule set should be used over the requested role (e.g. if role name contains 0001 use rule set 0001, if role name contains 0002 use rule set 0002).
We have alerady tried several different senarios in BRF+ without success.
Does anybody have a solution or at least an idea for this topic?
Thank you all very much in advance!
Eva

Hi Ashish ,
Thanks for your time . Let me explain you my requirement and would really appreciate if you would have some inputs here which would help me to design this .
The actual client requirement is to design a CUP Workflow and If there are SOD issues identified, the workflow will need to go to a central team for them to address each issue. If this group decides to apply mitigating controls to the issues, the workflow must then go to the compliance group for them to review for appropriateness. Requirement is do a SoD analysis for every role change/add request , so that this group takes the appropriate action based on the SoD Analysis . For all my CUP request raised , i want system to do a SoD analysis and let this group know whenever there is a SoD found or just end the workflow if there is no risk.
I am aware of the Risk analysis process for GRC 10.0 , however i want it to happen as a part of this work flow requirement.
The requirement is to configure the access request work flow so that the end goal of work flow is just facilitation of an SOD review. I hope i was able to explain my requirement . Thanks again for your help.
Your valuable guidance would be really appreciated.
Vikas

Need help on "Displaying items for Library System"

Hi folks, i am currently new to this forum and I need help on this problem ASAP.
I currently doing

Sorry, I accidentally hit the enter button so i start again.
I currently doing a online Library system and I hve been assign the task of doing the "search items" use case.
The situation is like this, my system retrieves 50 items based on the user selection and displaying them on a page.
The problem is I do not know how to seperate the items cos I don wan to display everything on the page, wat i wan is like displaying first 20 items on the page and when the user click the "next" link, the next 20 items will be display on the same page.
My teacher ask me to use custom tags(WHICH I NEVER LEARN BEFORE) so
please give me advise or related links as soon as possible cos I have to hand in the project in two weeks time.

Auto code completion settings for new ABAP Editor

Dear all,
I am working in New ABAP editor but i am unable to set auto code completion,
please tell about customising of new ABAP editor for Auto code completion.
Thanks and regards,
Gaurav Sood

Hello,
       1.      Choose Utilities ® Settings.
The User-Specific Settings dialog box appears.
       2.      Choose ABAP Editor.
       3.      Set the new editor mode.
From:
http://help.sap.com/saphelp_nw04s/helpdata/en/43/29dee414483fe1e10000000a11466f/frameset.htm
Regards,
Jorge Diogo

UNABLE TO SET parallel_automatic_tuning=TRUE IN Oracle9i Enterprise Edition

Hi,
i am trying to set parallel_automatic_tuning=TRUE . but i am unable to set it.
My oracle version is as below.
SQL> SELECT * FROM V$VERSION;
BANNER
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
PL/SQL Release 9.2.0.1.0 - Production
CORE 9.2.0.1.0 Production
TNS for 32-bit Windows: Version 9.2.0.1.0 - Production
NLSRTL Version 9.2.0.1.0 - Production
Please help to resolve this issue.
thanks
sivasankar.

hi i am unable to set the value as true for parallel_automatic_tuning parameter. ,
SQL> SHOW PARAMETER PARALLEL
NAME TYPE VALUE
fast_start_parallel_rollback string LOW
log_parallelism integer 1
parallel_adaptive_multi_user boolean TRUE
parallel_automatic_tuning boolean FALSE
parallel_execution_message_size integer 2148
parallel_instance_group string
parallel_max_servers integer 5
parallel_min_percent integer 0
parallel_min_servers integer 0
parallel_server boolean FALSE
parallel_server_instances integer 1
NAME TYPE VALUE
parallel_threads_per_cpu integer 2
recovery_parallelism integer 0

System Refresh of GRC 5.3 system

Hi Gurus,
Our client has putforth a requirement of refreshing the GRC 5.3 development system in our landscape with the data of GRC 5.3 production system. I could find document for Homogeneous System Copy for standalone Java engines in Service Marketplace. But, i was not able to find any document specific to GRC 5.3 system refresh.
Please guide me in providing help in the system copy procedure so that i can take the necessary precautions in doing the system refresh.
Regards,
Ragav

Hi,
I am not sure on the reasons for system refresh. Look at the below points:
1. The RAR data c(Rules, Functions, Risks etc) an be downloaded and uploaded in the Development environment. Why you need the production user data in Development?
2. The SPM users are intended for production. Why you are planning to copy/simulate them in development?
3. The ERM and CUPs are workflows, where the systems and other settings have to be created manually. What is your intention in getting them to development?
As per my knowledge, no system refresh is performed for GRC systems? May be you need to educate the client on these things. Please look for the ideas from the other experts too before you go back to your client.
Hope this helps!!
Warm Regards,
Raghu

Unable to set property Refresh Completed Items for UWL system

Similar Messages

Maybe you are looking for