Unable to set state to 'required' for RadioButtonGroupByKey UI element

Hi all,
I'm using RadioButtonGroupByKey UI element that is bounded to a simple type.
Simple type looks like this:
0 -- Sunday
1 -- Monday
2 -- ...
The selectedKey property is bounded to the simple type.
The state property is set to 'required'
Although I'm using a radio button I don't want to set default selection.
I cannot set label for RadioButtonGroupByKey (unlike inputField).
I'm expecting to see a red asterisk near the radio button but I don't.
What else do I need to set in order to see the red asterisk?
I'm using 7.00.14
Regards,
Omri

Hi
We need to initialise the value before using it In validation case :
First go through this [thread|How to highlight checkbox group UI element upon validation error.;
for code sample refer [this|How to highlight checkbox group UI element upon validation error.;
Best Regards
Satish Kumar

Similar Messages

Unable to set the ip address for hosted network client after creating WIFI hotspot

Original Title: INTERNET CONNECTIVITY PROBLEM WITH MY LAPTOP WIFI HOTSPOT
HI all
I am able to use internet connection from my lap hotspot, when the internet source is Public or private wifi.
so I know the cmd window commands for hotspot and settings of client(sharing to hosted network client, assigning IP address etc.,)
but the problem I am facing is slight different
I am using my cdma wireless broadband datacard as my source internet connection(Reliance netconnect +)
when I try to create hotspot for this, as usual I am able to create the hotspot and able to share the internet to hostednework client.
but I am unable to set the ip address for hosted network client, if I try to set ip 192.169.137.1 and 255.255.255.0
as soon as I close the window, the ip address also disappears
when connect my android phone to that hotspot, it is able to connect but there is no internet connectivity.
when I check the hostednetwork client for packet transmission, both sent and received packet is happening., I mean transmitting
so what cause the failure in internet connectivity but success in hotspot connectivity?
check the screen shots...
can u help me..
its little complicated

Hi,
Please make sure the Ad hoc connection IP adress is at the same range with your local connection. In addition, how about recreate the ad hoc connection for test, please have a try.
If problem persists, please use Network troubleshooter in Action Center to fix this problem for test.
Roger Lu
TechNet Community Support

Unable to set fontFamily property in Business Graphics UI Element?

Dear All,
I was trying to set the fontFamily property of BusinessGraphics(BG) UI Element. After setting the fontFamily property for BG UI Element, this property is not getting reflected in the chart in Portal but it is reflected under Chart designer. Is there something which is overwriting the user defined setting for fontFamily? and I am not using any URL for IGS.
On the other other UI Element properties like ChartType and dimention are reflected in both Chart Designer and Portal.
Please respond at ur earliest.
Thanks in advance.
Regards,
Nittin
Edited by: Nittin Garg on Jun 18, 2008 11:33 AM

Dear Kai,
Thanks a lot for your response.
1. According to your suggestion (note 531668), it has been found that XMLCHART is already installed on our Integrated IGS server.
2. According to note 1028690, it has been found that "IGS 6.40 with patch level 19 or higher" should be available, but in our case we have "IGS 6.40 with patch level 16". Now what I would like to inquire is that does upgradation have any side effects on server?
For your information I would like to clear you that I want to use Vrinda font (its a standard font), but at present font shown in the chart is Arial.
Do we need to install some other Interpreter (eg. GFWCHART)? or some thing else is required to show the desired standard font?
Regards,
Nittin

Unable to set the selected value for a ADF LOV

Hi,
I am developing an application using jdeveloper 10.1.3 and Struts.
I have created a ADF LOV on my JSP Page as given below:
<html:select property="lob" onchange="javascript:selectLOB(this.form)">
<html:optionsCollection label="prompt" value="index" property="lob.displayData"/>
</html:select>
When i submit the form, i am able to get the value of the selected Value in the List.
JUCtrlListBinding listBinding = (JUCtrlListBinding) formBean.get("Lob");
Row r = (Row) listBinding.getSelectedValue();
String SoLob = (String) r.getAttribute("LobLob");
But i am unable to set the selected value back in the list when i return to the form again.
I tried the following:
int x = listBinding.getSelectedIndex();
listBinding.setSelectedIndex(x);
It would be really helpful if some one could let me know what needs to be done.
Thanks,
Subashini

Gyan,
I tried with the code you suggest , its trying to set the value of a field, but my requirement is to change the property for
"Rendered" on the field so that based on search parameters we can hide result table column.
After searching online, I modified the controller code as follows
1.Created a new transient attribute (Testrender) with type "Boolean" and always updateable.
2.changed the "Rendered" property value on the field I want to hide as ${oa.PoSearchVO1.Testrender}.
3. Modified the controller code as follows :
        OAApplicationModule am = pageContext.getApplicationModule(webBean);
        OAViewObject testvo = (OAViewObject)am.findViewObject("PoSearchVO1");
        OADBTransaction txn = am.getOADBTransaction();
        if (testvo != null)
          OARow row = (OARow)testvo.first();
            if (a.equalsIgnoreCase("Approved"))
                 row.setAttribute("Testrender", Boolean.FALSE);
            else
                 row.setAttribute("Testrender", Boolean.TRUE);
        } But now when i run the page and populate the search field and click "Go" its hiding the field but throwing the following error and the search results are also bad.
Its using only the value of one search parameter but not the second one .
The search cannot be executed because the table has pending changes that would be lost. I think the vo is getting dirty when I update the transient attribute value. So I used txn.rollback ,then search is working fine but its not hiding the field.
So can you please let me know how to proceed from here ?

BODS / SAP : what set-ups are required for communicating with each other ?

Hi.
There is a new SAP system
And there is a new BODS installation.
Both on independent server machines but on the same lan network.
On the test system of BODS. We tried to see how the communication happens with SAP.
While we try some test jobs by trying to pull a simple table on SAP R/3
In Dataflow, we used simple SAPR/3 ABAP flow. And put it into target database thro query transformation.
In the datastore,
We used the Generate and Execute option,
with a path on the local directory of BODS server for creating the ABAP program and the dat file.
However,
We are always getting error on batch job schedule.
Although the user is having rights on the R/3 table
And can login into SAP R/3 system and check the table.
Still we get an error saying Databstore unabel to connect to R/3 system. Check for user login etc.
For anyone whose login we use. We get the error.
However, if i directly generate the code on the ABAP flow (without running the job),
make the program available on R/3 system.
and then run the job as execute preloaded
this works fine without any error.
and we are able to see the data in the target table.
Now both the systems are new.
And am not aware of the initial set-ups which are required for communication between SAP / BODS.
Are WE missing something on the SAP side setups - for generate and execute option to be used?
Is there anything specific to be done for ease of the communication between SAP server and BODS server in this regard.
Can anyone share some inputs on this.
Actually for any user with full admin rights too, on the sap side, if we use the user login for R/3 connectivity for this particular "generate and execute" option, it errors out after nearly 10 minutes. Then the error says, login info not correct.
So basically, the communication channel by itself between SAP R/3 and BODS seems to be locked somewhere.
If anyone with SAP admin expertise - can help or advise on this.
Many thanks
Indu
Edited by: Indumathy Narayanan on Sep 13, 2011 9:20 PM

Getting data out of R/3 requires two distinct setup tasks, and they don't have much to do with each other.
The first basic task is to get the little ABAP extraction programs loaded and run in R/3. You can pre-load them and then call them, or generate, upload, and execute them all on-the-fly, at BODS runtime. During development, use "Generate and Execute" for your ABAP.
Once that's done, you have four different choices to get the data back: "Direct download", "Shared directory", FTP, and "Customer Transfer". Normally, you'll use either FTP or "Shared directory". Refer to the documentation (the BODS SAP Supplement) for a description of all this.
In all cases (or at least, quite certainly, using the FTP and Shared Directory methods), the ABAP extraction programs are directed to plop their output as flat files in the "Working directory on SAP server." For testing, you can look in that folder to see if any flat files are appearing when you submit an ABAP data flow. If not, then either 1) your ABAP program isn't getting in there (a Basis admin should be able to tell you), or 2) it's not running (ditto), or 3) it's running but unable to generate the output file (ditto), because a) SAP isn't permitted to write to that folder, or b) the folder doesn't exist (it needs to be defined from the perspective of the SAP server).
If you do see files appear in the "Working directory on SAP server" when you run a BODS job w/ an ABAP dataflow, then the problem is that BODS can't fetch them. If you're using the "Shared directory" method, which is suitable for and often used in all-Windows environments, then the account under which the Job Server in question is running must have access to the "Working directory on SAP server," but this time from the perspective of the Job Server. So if, for instance, SAP was directed to put the flat files on a local folder, say, "E:\USR\SAP\BODS", then you might want to share this folder out as, for instance,
sapdev1\bods (for an SAP host called "sapdev1"), and then enter "
sapdev1\bods" in the "Application path to shared directory" field, in your SAP datastore configuration. If your Job Server service is logging-in as "Local System," though, it won't be able to get there -- it needs to log-in as an AD domain account w/ rights to that share. Get it? Try logging in to your BODS job server computer with the AD "service account" setup for use by the Job Server service, and try to open a file on the "Application path to shared directory". If you can't, then BODS won't be able to get data from ECC, either. FTP works similarly -- if you're using that and having trouble, please re-post.
Best wishes,
Jeff Prenevost
Data Services Practice Manager
itelligence

Unable to set working directory (-2147024832) for some app installs

I've found several drivers on a Dell Laptop that don't play well with others in MDT 2012, so I started making an application install package for them instead. Most of them fail with an "unable to set working directory" error. I checked
the app install logs and they don't really make any sense to me. I know the process as a whole works, because I can install .Net 4.0 runtimes without any problems using the same method. The important bits of the ZTI App log are below. Would
be for any guidance on this, as I'm stumped and none of the searches on the exact errors are of much help.
A sample error returned in the wizard is:
WARNING - unable to set working directory (-2147024832)Error installing application Dell 3440_Chipset_Driver_JD3WN IMEI drivers 9.5.3.1520_A00: The system cannot find the file specified.
The ZTIApplication.log file contains the following... the first is one that works (.NET 4), the second is one that fails. (Not using code block for this one, it doesn't like it).
<![LOG[Validating connection to \\ITSASERVER\DeploymentShare$\Applications\Microsoft .NET 4.0 runtime 4.0]LOG]!><time="08:20:30.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1"
thread="" file="ZTIApplications">
<![LOG[Already connected to server ITSASERVER as that is where this script is running from.]LOG]!><time="08:20:30.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[ Change directory: \\ITSASERVER\DeploymentShare$\Applications\Microsoft .NET 4.0 runtime 4.0]LOG]!><time="08:20:30.000+000" date="09-27-2013" component="ZTIApplications"
context="" type="1" thread="" file="ZTIApplications">
<![LOG[ Run Command: \\ITSASERVER\DeploymentShare$\Tools\X64\bddrun.exe dotNetFx40_Full_x86_x64.exe /norestart /passive]LOG]!><time="08:20:30.000+000" date="09-27-2013"
component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[ZTI installing application ]LOG]!><time="08:20:30.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Event 41031 sent: ZTI installing application ]LOG]!><time="08:20:30.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[About to run command: \\ITSASERVER\DeploymentShare$\Tools\X64\bddrun.exe dotNetFx40_Full_x86_x64.exe /norestart /passive]LOG]!><time="08:20:30.000+000" date="09-27-2013" component="ZTIApplications" context=""
type="1" thread="" file="ZTIApplications">
<![LOG[Command has been started (process ID 3212)]LOG]!><time="08:20:30.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[ZTI Heartbeat: command has been running for 0 minutes (process ID 3212)]LOG]!><time="08:20:31.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[Event 41003 sent: ZTI Heartbeat: command has been running for 0 minutes (process ID 3212)]LOG]!><time="08:20:31.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1"
thread="" file="ZTIApplications">
<![LOG[Return code from command = 0]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Application Microsoft .NET 4.0 runtime 4.0 installed successfully]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Event 41033 sent: Application Microsoft .NET 4.0 runtime 4.0 installed successfully]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[Property InstalledApplications001 is now = {9abb5842-9a8e-45c5-9268-4fa4e69dba34}]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[Application Microsoft .NET 4.0 runtime 4.0 needs a reboot, initiating.]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[Dependent application requested a reboot]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Property SMSTSRebootRequested is now = true]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Property SMSTSRetryRequested is now = true]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Exiting to initiate a reboot with retry (to pick up where we left off)]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[ZTIApplications processing completed successfully.]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Event 41001 sent: ZTIApplications processing completed successfully.]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[################]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Entry: {dee65f94-e269-4eac-927d-6e06c0e0eb9d}]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Name: Dell 3440_Chipset_Driver_JD3WN IMEI drivers 9.5.3.1520_A00]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[################]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Validating connection to \\ITSASERVER\DeploymentShare$\Applications\Dell 3440_Chipset_Driver_JD3WN IMEI drivers 9.5.3.1520_A00]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context=""
type="1" thread="" file="ZTIApplications">
<![LOG[Already connected to server ITSASERVER as that is where this script is running from.]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[ Change directory: \\ITSASERVER\DeploymentShare$\Applications\Dell 3440_Chipset_Driver_JD3WN IMEI drivers 9.5.3.1520_A00]LOG]!><time="08:25:04.000+000" date="09-27-2013"
component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[WARNING - unable to set working directory: (-2147024832)]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="2" thread="" file="ZTIApplications">
<![LOG[ Run Command: \\ITSASERVER\DeploymentShare$\Tools\X64\bddrun.exe Setup.exe -s]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications"
context="" type="1" thread="" file="ZTIApplications">
<![LOG[ZTI installing application ]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Error executing web service http://ITSASERVER:9800/MDTMonitorEvent/PostEvent?uniqueID=2a0f4469-d803-4976-b434-adbf06b85c23&computerName=Lat3440_0927b&messageID=41031&severity=1&stepName=Install Applications&currentStep=61&totalSteps=88&id=4C4C4544-0031-4610-8053-B7C04F4C5731,E0:DB:55:AC:48:1C&message=ZTI
installing application &dartIP=&dartPort=&dartTicket=&vmHost=&vmName=: The server name or address could not be resolved
(-2147012889)]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Event 41031 sent: ZTI installing application ]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[About to run command: \\ITSASERVER\DeploymentShare$\Tools\X64\bddrun.exe Setup.exe -s]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[Error installing application Dell 3440_Chipset_Driver_JD3WN IMEI drivers 9.5.3.1520_A00: The system cannot find the file specified.
]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="3" thread="" file="ZTIApplications">
<![LOG[Error executing web service http://ITSASERVER:9800/MDTMonitorEvent/PostEvent?uniqueID=2a0f4469-d803-4976-b434-adbf06b85c23&computerName=Lat3440_0927b&messageID=41032&severity=3&stepName=Install Applications&currentStep=61&totalSteps=88&id=4C4C4544-0031-4610-8053-B7C04F4C5731,E0:DB:55:AC:48:1C&message=Error
installing application Dell 3440_Chipset_Driver_JD3WN IMEI drivers 9.5.3.1520_A00: The system cannot find the file specified.
&dartIP=&dartPort=&dartTicket=&vmHost=&vmName=: The server name or address could not be resolved
(-2147012889)]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Event 41032 sent: Error installing application Dell 3440_Chipset_Driver_JD3WN IMEI drivers 9.5.3.1520_A00: The system cannot find the file specified.]
<![LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
Why can't it find it or set the working directory, especially when it's already validated that it's there?
--smthng

I'm not familiar with how Dell does their client side software, but for the server-side software (my area of expertise), I've always done something like the following:
I recommend running every application install in a VBScript/Powershell wrapper. You get logging for the application back on your SLShare as well as its cleaner (you can replace Drivers A05 with A06 by changing the script, rather than editing the application
in MDT).
sApplicationName = "Dell 12G Chipset"
oLogging.CreateEntry "Install-" & sApplicationName & ": Starting " & sApplicationName & " installation", LogTypeInfo
'//Set Destination Folder
sDestFolder = "c:\temp\"
'//Set Source Install Directory
sSourceDir = oUtility.ScriptDir
sSourceDir = sSourceDir & "\Source"
'//Check that folder exists, if not, create it.
oLogging.CreateEntry "Install-" & sApplicationName & ": Check that " & sDestFolder & " exists.", LogTypeInfo
if not oFSO.FolderExists (sDestFolder) then
oFSO.CreateFolder sDestFolder
End If
'//Copy folder from MDT share to C:\Temp
oLogging.CreateEntry "Install-" & sApplicationName & ": Copy from " & sSourceDir & " to " & sDestFolder, LogTypeInfo
oFSO.CopyFolder sSourceDir, sDestFolder
'//Sleep for 2 seconds to allow copy to finish
wscript.sleep 2000
sFile = sDestFolder & "Source\setup.exe"
'// Check if file/folder exists
If not oFSO.FileExists(sFile) then
oLogging.CreateEntry "Install-" & sApplicationName & ": " & sFile & " was not found, unable to install " & sApplicationName & "", LogTypeError
ZTIProcess = Failure
Exit Function
End if
'// Create log entry to show file being run
oLogging.CreateEntry "" & sFile & " -s", LogTypeInfo
iRetVal = oUtility.RunWithHeartbeat("" & sFile & " -s")
if (iRetVal = 0) or (iRetVal = 3010) then
ZTIProcess = Success
Else
ZTIProcess = Failure
End If
wscript.sleep 15000
'// Disable Zone Checks
oEnv("SEE_MASK_NOZONECHECKS") = 1
'//Folder Cleanup
oFSO.DeleteFolder sDestFolder & "Source"
I always copy any drivers that are installed after the fact (everything for me other than SAS/NIC drivers) to the C:\Temp as it can break. I always update my NIC drivers during the build to the latest Dell software using their packs. I try to
not mess with my boot image unless I'm adding a new model that is not supported by the built-in drivers.

Unable to set up connection factory for stand-alone resource adapter

I'm testing out JCA 1.5 in OC4J P4, and I try to register a resource apapter by configuring oc4j-ra.xml like this:
<connector-factory location="MySomething" connector-name="Something">
However, I get the following error:
05/09/28 17:14:24 Notification ==> Warning. Unable to set up connection factory
to location MySomething for a resource adapter deployed as stand-alone.
Is this a bug, or just me?
Would appreciate it if someone knew what was wrong.
Regards
-am

Looks like you need to tell us more...
How is your adapter packaged?
Which files are included (deployment descriptors, etc)?
--olaf

HT4914 iTunes sight states PC requirements for iTunes Match is: iTunes 10.5.1 or later but my PC is not allowing download stating I need windows upgrade to 8. Anyone else have this issue.

iTunes Match states PC requirements is iTunes 10.5.1, but my PC states I need to have windows 8 to use Match or access it on PC. Any way around this?

Anyone?

Is there a way to set Minimum Time Requirement for a course?

Is there a way to set a minimum time requirement in a Capitvate 5 course?
For example, the learner must be in the course for a minimum of 30 minutes or the course can not be considered "complete." This is a SCORM course and the learner's record in the LMS will not show the course as complete until the learner has been in the course at least 30 minutes. (This minimum time requirement may or may not be in conjunction with also passing a test with 80%. for example, in order to be considered complete, the user must be in the course for at least 30 minutes AND pass test questions with a score of at least 80%)
Perhaps some modification of the Timer Widget described by Lilybiri at http://bit.ly/ep5cOY?
Or, some modification of the SCORM Manifest?

Lilybiri,
Thanks to your 2 articles on variables and advanced actions as well as a few other resources (listed below) I was able to get up-to-speed enough on Adobe Captivate variables and advanced actions and implement your solution 90%.
The last 10% is...
You had recommended in Step 2 to "Attach a score of 0points to the CBNo and a score of 100points (just an example) to the CBYes."
My question is, how do I attach points to the buttons? Is "score" a system variable? Also, is there anything special I need to know about these attached points in terms of how they will be communicated to our LMS using SCORM protocol?
And as a final thought....
If someone exits the eLearning and then re-enters the next day, I think that the cpInfoElapsedTimeMS will reset to zero, is that correct? Is there way for the project to remember what the cpInfoElapsedTimeMS was? We are using this in conjunction with an LMS using SCORM, if that is helpful.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
RESOURCES FOR LEARNING ADOBE CAPTIVATE VARIABLE AND ADVANCED ACTIONS
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In case anyone else needs to get up-to-speed on Adobe Captivate variables and Adobe Captivate Advanced Actions (for Captivate 5), here are the resources I used. Hope others find them helpful useful as well.
Lilybiri:
Article 1: "Use Power of Variables in Captivate 5 (4) - without advanced actions": http://kb2.adobe.com/community/publishing/862/cpsid_86299.html
Article 2: "Unleash Power of Variables in Captivate (4&5) with Advanced Actions"
http://kb2.adobe.com/community/publishing/871/cpsid_87182.html
http://lilybiri.posterous.com/unleash-the-power-of-variables-in-captivate-5
Adobe Webinar by Vish at Adobe:
"Using Advanced Actions & Variables in Captivate 5" http://www.adobe.com/cfusion/event/index.cfm?event=set_registered&id=1808722&loc=en_us
CP Guru
"List of Adobe Captivate 5 System Variables" http://www.cpguru.com/2010/07/20/adobe-captivate-5-system-variables/
If you scroll to the bottom on the webpate, you can download a beautifully formatted PDF

Unable to set manual IP address for VPN connection

Recently a VPN connection with a client stopped working. They changed phone companies and changed some of the IP addresses.
After alerting them I could no longer log in, I received the new server address which I can log in with it,
BUT my computer is assigned a dynamic address that is already in use on their network. This causes my computer to *not* be connected to their network, even though I am inside their firewall; therefore I cannot adjust the database files I need to.
I have tried to set the VPN (PPTP) connection TCP/IP address IPv4 manually, using the static address they just gave me. But each time I connect, [I believe] their router assigns me an address that is already in use.
They do not use IPv6.
Can anyone give me direction on how to make the manual IP address *stick*?
The tech person at the site keeps telling me it is a problem with my "Mac, because with Windows.... blah, blah, blah".
I am pretty sure this is not the case and in fact I was the one who let her know I was receiving a duplicate address.
Your VPN expertise is really appreciated.
Thanks in advance,
Michele

Hi,
Please make sure the Ad hoc connection IP adress is at the same range with your local connection. In addition, how about recreate the ad hoc connection for test, please have a try.
If problem persists, please use Network troubleshooter in Action Center to fix this problem for test.
Roger Lu
TechNet Community Support

Setting and process required for using COGI

Hi Gurus,
At present we are using scenario,if child parts are not available system will not allow production confirmation.But it leads customer line stoppage.Now I want to use scenario that we can confirm production in absence of child part and we able to make invoice for finish good and we can take care of child part later.
So you are requested to pl. send total path if possible from customization to end user activities.
Regards
L.B.Yadav

Hi,
System will not do GI automatically you have to do it manually(Through procrument and Production Transction) , Negative stock Functionality is used where the user are not that much trained
some time during night shifts production takes place and suppose user dont know how to tackle or got the error the process stop
Negative stock allow to do posting without availability of stock and it will shows under negative stock
this Functionality you can use during Project stabalization stage ,when user is not aware about COGI transaction and Production cycle . once he awair all cycle you can remove setting of negative stock .
If you are using MFBF then you need to check Post processing record (MF47) for deficate quantity Negative stosk settings reduce the effort of checking Post processing record .
Regards
Girish

NB300 unable to set to AHCI mode for SSD drive

Hi,
I have a Toshiba NB300 netbook, running Windows 8 Pro 32 bit, very happy with it!
I have a Corsair Force 3 112GB SSD drive installed, and everything seems to be running very nicely!
Reading up on SSD drives I see that for best performance I should be running the SSD in AHCI mode.
So I went to the Setup menu on start up and changed from Compatibility mode to AHCI.
I've actually tried this a few times, always with the same result, failure!
When the system attempts to boot I get a message saying a problem was encountered, and that
the sytem is trying to gather information.
The only solution is to go back into setup and reset to Compatibility mode.
The BIOS is up to date, and I just can't think of any way to resolve the issue.
I really would like to get the best performance I can on this net book.
I have a screen grab of the SSD drive details from Speccy, but I can't see a way of attaching it?
If any one can advise me on how to get AHCI mode up and going I would really appreciate it!
Thanks
Chris

Unfortunately on this forum we dont have reports about SSD usage on NBs. I have NB520 and I would like to use SSD to but until now I didnt find the right one.
As far as I know by default BIOS is set to AHCI mode. Which OS have you installed? Original one that you got with your notebook or your own version? Have you installed Intels storage manager from Toshiba download page?

10g: unable to set default dashpoard (portalpath) for multiple groups

Hi All,
I am facing a problem while setting portal path for multiple groups.
I have two RPD groups and each group need to have it's own default dashboard as a lending page.
We are using RPD authentication and can't use database table to save portalpath for each user or group.
What have I tried so far is as follows:
We have two groups Group1 and Group2 which need to have default dashboard as *\shared\_portal\dashboard1* and *\shared\_portal\dashboard2* respectively.
Approach 1: Create a Session INIT block with the following query:
select case when 'Group1' = ':GROUP' then '\shared\_portal\dashboard1' else '\shared\_portal\dashboard2' end from dual
Result: Failed - As all the users are directed to '\shared\_portal\dashboard2'. Somehow *':Group'* isn't getting the GROUP assigned.
Even tried replacing ':GROUP' with 'VALUEOF(GROUP)' in SQL query, however it didn't help.
Any help with achieving the same functionality will be appreciated.
Regards,
Kansal

Kansal,
Here you go...make use of below example and change as per you need.
Create a SESSION - INIT BLOCK with this in query...Say PPIB
SELECT CASE WHEN 'VALUEOF(NQ_SESSION.GROUP)' = 'DASH_usr' THEN '/shared/test' WHEN 'VALUEOF(NQ_SESSION.GROUP)' = 'DASH_ctr' THEN '/shared/test1' END FROM DUAL
Assign a variable to it with name PORTALPATH and default to anything say '/abc/'
This will work for sure...You can test this in RPD as well.
Hope this helps

Unable to Set Up Outlook Account for HP ePrint

My company just bought a HP Laserjet Enterprise 500 M551 last week. I was able to download ePrint in my boss' mobile devices - iPhone and iPad, enable picture ePrint and added her Gmail account to ePrint. But I couldn't figure out how to add her Outlook account to ePrint, as I don't know those three - POP or IMAP, hostname and port number.
Someone please help.
Thanks in advance.

Hi CQIS04,
I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

OBYC SETTING NAME IS REQUIRED FOR WIP STOCK ENTRY

Hi,
Kindly give me the details of OBYC Config. settings related to WIP stock entry posting into FI as we need to assign the GL account to post the WIP stock and revesal of same after completion of TECO.
Please reply at the earliest.
Thanks
G. Jana

Its not OBYC it's OKG8!

Unable to set state to 'required' for RadioButtonGroupByKey UI element

Similar Messages

Maybe you are looking for