Unable to set Static IP in Wicd

Wicd will get an IP just fine if I let it do DHCP. When I try and set my static IP it acts like its connecting and then just says not connected. The wicd .log has:
Putting interface down
Releasing DHCP leases...
Setting false IP...
Flushing the routing table...
Putting interface up...
Setting static IP : X.X.X.164
Setting default gateway : X.X.X.1
Connecting thread exiting.
Sending connection attempt result Success
X's to not show my IP. I entered the same information into the Properties tab that I would in windows or that I do in rc.conf and resolv.conf that lets me set a static ip without using wicd. There is 2 lines that I dont have that I have left blank and wondering it this is why its not working because I dont know what goes in them. DNS domain and Search domain(i have no idea what these 2 are looking for). I tried entering the server names for DNS 1 and 2 but that didnt work. I tried just ph.cox.net and cox.net in the DNS Domain field and that didnt work. So now im stumped and was wondering if anyone could point me in the right direction.
Thank you for your time reading this and any help you can give.

Well that makes me feel better, I did leave them blank but it would not connect. I actually tried googles DNS in DNS 1 and 2 and received the same results as with my proper ISP's DNS.
I did not try Global DNS Servers way that you described, I was entering in the information in the properties tab. I will go ahead and try this method.
Im correct on my gateway, I run an ipcop box as my router and set everything in my house with static IP's so I have the DNS and gateway information correct.
Thank you for your suggestion, ill go try that and see if it works.
I am not sure if it matters but I am using wicd-gtk to set everything and not doing it through the terminal with just wicd or wicd curses.

Similar Messages

  • Unable to set static ip on Network Manager

    when i try to set static ip on Network manager
    i open the applet on gnome,change the ip setting and when i try to save, appear for a nano-second the authentication window and disappear
    this happens only whit the ethernet connection and not with the wireless connection
    can anyone help me

    https://bbs.archlinux.org/viewtopic.php?id=118412
    had the same problem, maybe it helps you.

  • Unable to set static IP to wireless printer Officejet 6600

    First sorry my poor english, still keep trying  We do have an HP Officjet 6600 Printer for about 6 months.This printer has USB and WLAN, but no LAN port. We used the printer until 2 weeks ago. At that time, **bleep** starts ...As long as we used the printer, he was connected via Automated WLAN (DHCP) and everything worked fine.The printer was connected to our WLAN Modem which assigned the DHCP IP Adress automatically.Then, our Internet provider updated our cable modem, which is also our WLAN router, and since that time, the printer does not work anymore. He always shows an error after booting, and told us to restart the printer, and all lamps of the printer are continously blinking. There is no way to access the printer menus on the printer.After a long and intensiv internet research, i found out that the cable modem is responsible for the printer error!It looks like the WLAN DHCP Server of the cable modem sends DHCP messages, which the printer cannot use correctly. If I shut down the modem (with the integrated WLAN router), the printer boots normal without an error, but I cannot use him becaused he is not connected to WLAN as because the modem is offline.So I wanted to set the printer to not use DHCP by assigning static IP to the printer. But this does not work! I tried 10 times or more to assign static IP, Subnet, Gateway and DNS-Server, no way, the printer always show "IP not set" (same for the others). Can anybody tell me why I'm not able to set static IP, Gateway etc. to the printer?!Thanks for every suggestion. 

    Hi , Thanks for reaching out to the HP Forums. I understand you are having some difficulty modifying your network settings. Since you now have a new cable modem, let's start with a more basic approach. Please use the following document for instruction to reset the printer to your new network settings: Connecting the Printer After Changing Your Wireless Network.  You may notice, when you open the link, that the full title mentions the Photosmart B209a, the instructions presented apply to your printer to so please don't be alarmed. I hope this helps.

  • WRV200 Unable to set static default route

    In my case i should use the wrv200 as a router with static routes.
    A tried to set up a route 0.0.0.0 0.0.0.0 192.168.1.254.
    I did not get any error messages after clicking the "save changes" button, but it does not work and it can't be seen on the routing table.
    I think that it is not a missing feature! That must be a bug!
    Could anybody help me please?

    I can not do that because the default gateway parameter belongs to the wan interface, which is connected with the router at the vineyard over vpn and has the ip 172.16.1.1 if I try to set here 192.168.1.254 it says:
    "The gateway should be in the same subnet as the interface" or something like that with the same meaning.
    I did not post but i use the firmware version 1.0.39

  • How to set static IP for C4599 printer ???

    Was afraid if we clicked 'answered' <per 'answer' below> we may never get an answer to a followup question to 'PrintDoc'  at http://h30434.www3.hp.com/psg/board/message?board.id=Networking&thread.id=5277 .
    Hopefully this re-post will help.
    Question/s...
    1. When trying to set 'static IP', and click on 'this' link ( http://h30434.www3.hp.com/t5/forums/replypage/board-id/Networking/message-id/NetGear%20'RangeMax'%20... ) at your email < below> get...
    "An Unexpected Error has occurred."
    2. Also, getting printing error after HP Director shows C4500 wireless connected and starts printing.
    At 'Component Services' / 'Event Properties' shows...
    "The document http://wwwapps.ups.com/WebTracking/processInputRequest?HTMLVers owned by Alan failed to print on printer HP Photosmart C4500 series (Wireless). Data type: NT EMF 1.008. Size of the spool file in bytes: 48960. Number of bytes printed: 0. Total number of pages in the document: 2. Number of pages printed: 0. Client machine: \\AKM. Win32 error code returned by the print processor: 2250 (0x8ca).
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp."
    When click on 'events.aps' link get...
    'Event Viewer' showing 'xpsp2res.dll' file info ?
    Does #2. have anything to do with 'IP' question, and will 'static IP' fix ?"
    Please advise.
    Thanks much.
    Original answer...
    10-13-2009 10:03 AM
    PrintDoc 
    Master's Graduate
    Posts: 1383
    Registered: 08-19-2009
    Message 8 of 10
    Viewed 481 times
    Re: C4599, wireless Error-Printing, unable to 'communicate' with the device ???
    Sure we can set a static IP (actually we are going to reserve an IP address - even better).  But first, please mark the post that helped you solve the problem as "Accepted Solution".
    Connect to the wireless router by typing the IP address of the wireless router in the address field of your browser, then click Enter. 192.168.1.1 is the default IP address of the wireless router. The wireless router will prompt you to enter the user name of 'admin' and the password. The default password is 'password'.
    See the procedure on page 8-16 of this < http://h30434.www3.hp.com/t5/forums/replypage/board-id/Networking/message-id/NetGear%20'RangeMax'%20... > document to reserve and IP address for your printer. 
    You will need the MAC address of your printer (this is on the Network Config Page you printed from the front panel of the printer).
    (Although I am employed by HP, I am speaking for myself and not for HP)
    Original Posters - please mark the post that solves your problem as "Accepted Solution"
    Thanks again for your help !
    akm (XPproSP-3,IE-7,Office2003)
    This question was solved.
    View Solution.

    Thank you for the followup. 
    Just got back to this thread after trying what you suggested re new install program.
    Months ago, when originally tried to install new C4500, spent weekend, literally 4hrs on a Sat and 4hrs the following Sun with HP support on the phone trying to get C4500 wireless to work.
    Finally downloaded a new install program and after installing that and making other numerous setup adjustments, which I cant remember, it worked (the only saving grace for the time spent) for a while.
    But for the sake of trying, we did put in the original disk, just like page 4 (or our original paper manual) instructed (per your last post).
    The disk loaded and the program did its thing and then get...
    "A newer version fo this software is alredy installe on you HP HPPhotosmare C4500 series computer."
    So clicked 'finish'.
    Then loaded...
    PS_AIO_04_C4500_USW_Full_Win_enu_120_210_NB.exe
    ...which we thougth was the new installer program which we downloaded those months ago (same one you suggested).
    Started the '4 step' process.
    Got to 'step 3' and it connected to printer with usb cable.
    Along the way got message from 'network diagnostics'...
    "The PC and the printer are connected to different networks(192.168.1.0 and 192.168.0.0).  They must be connected to the same network.  This can happen when you use the manufacturer's default network name (SSID) and another nearby network is using the same name.
    The gateway address of the printer does not match the network to which the printer is connected. Reconfigure the setting on your printer to match."
    Tried changing ip addresses at network settings, but no help.
    Clicked on disregard and proceed.
    Started 'Network diagnostics' and got...
    HPPhotoshopEssential 'install' bar window.
    Either way, disk or new install program, get pop-up window with message...
    'The feature you are tryong to use is on a CD-ROM or tother removabledisk that inot available. Insert the 'HPPyotosmartEsesential' disk and click OK."
    Moved HP .msi and .cab files to same directory with ...NB.exe file.
    Install went ahead, and then needed 'setup.exe'.
    Opened setup.exe at disk and install went ahead.
    Installed latext updated 'HP Solution Center'.
    It showed both the C4500usb and wireless, but still wireless not 'connected'.
    Ran diagnostics and got same 'diagnostics' message as above.
    Made sure hardware enabled etc.
    How to fix ? 
    Thanks again for your help !
    akm (XPproSP-3,IE-7,Office2003)

  • Has anyone encounter this "unable to set node credentials for /LDAPv3"?

    Install and updated the Macmini server to 10.6.5. It working fine until try to access the Server Preferences and error message "unable to set node credentials for /LDAPv3/127.0.0.1 with the record name **." Looking at the logs and has servermgr_accounts got error 5203 trying to auth to local LDAP node. Has anyone found solution for this problem?
    Thanks
    Luis

    Thank you for responding. This is what we are using in a small company a Cisco Switcher, and don't have a router.
    If you're getting connections off of the network out to the Internet, then yes, there is a router involved. Somewhere.
    MacMini server I have an IP address of 169.254.xxx.xx, before IP address was 192.254.xxx.xx.
    That IP address implies that the box isn't getting an IP address from a DHCP server; that's the self-assigned block. (Officially, these addresses are in the Automatic Private Address Configuration Automatic Private IP Addressing (APIPA) IANA reserved range.)
    Which implies that at least two problems lurk.
    Mac OS X Server must have a static IP address. Not DHCP-assigned dynamic addresses.
    And a DHCP server isn't answering the IP address requests. (Well, not unless the DHCP server is passing out addresses in the self-assigned block, and that wouldn't likely be considered best-practice. More likely an IP address from a DHCP address pool allocated within a subnet somewhere in the 10.0.0.0/8 or 172.16.0.0/12 or (less desirably) 192.168.0.0/16 private blocks.
    The Firewall is not turned on. Its purpose is for guest to access files, without deleting or modifying it.
    When you're debugging problems, simplify. Divide the problem. With network services, test the lowest levels of the stack. Then work your way up the stack; toward higher-level services and mechanisms. Then add more parts and pieces, and DHCP and related.
    IP hosts operating at 169.254.0.0/16 addresses (for longer than it takes to get an IP address from DHCP) usually implies that the network configuration is invalid or the DHCP server is not working.
    I did not expect that Open Directory would be a big problem.
    If DNS services or IP routing is misconfigured, then the whole rest of the stack will be unstable at best. The configuration order (and debugging order) involves functional IP networking and hardware, first and foremost. Then having functional DNS. Then Open Directory and then Kerberos. Then the rest of the stack.

  • Unable to  set some dates  in Adobe bridge cs2

    HI ALL
    Our keywording team using  the  Adobe bridge CS2.
    Kindly  hep me to understand Why  some dates  Like
    1/1/1970
    1/1/1642
    1/1/1890
    etc  .....
    I unable to  set in  ITPC image Tab  information .............
    Lakhan

    Hi
    Thanks for revert ......
    I  tried   with  CS2 & CS3  but only  specific  dates like (1/1/1970) i above  mentioned  is still  not   reflecting in IPTC image  info   ........
    Please suggest....

  • Illustrator won't run: "unable to set maximum number of files to be opened"

    I have an intel macbook pro (core duo with 2GB ram) and a copy of purchased adobe creative suite 2. Other applications in the suite like photoshop, acrobat, etc can run on my mac without any problem. But when I try to run illustrator, it just shows an error message "Unable to set maximum number of files to be opened" and quits. I also installed a trial version of illustrator cs3 and got the same problem. Can anyone help? Thanks.
    CC

    Hi, I realize this is an old thread but it was unanswered and the issue has come up again in a newer thread:
    http://forums.adobe.com/message/2534652
    If the original poster sees this, can you reply tin the new thread and let us know if you were ever to solve this problem?
    Thanks!

  • Service Desk Unable to set status to Customer Action and Proposed Solution

    Hi Everyone,
    We are unable to set a service desk issue to the status Customer Action or Proposed solution.
    I have someone create a new issue in the bakend system and when I receive the issue I assign it to myself as the processor. When I try to set teh status to Customer action it is grayed out.
    I have checked the following:
    1. As a test I assigned My user with sap_all profile so does not appear to be authroisation related
    2. The status profile has all six standard values (New, customer action, In Process, Sent to SAP, Proposed Solution, Confirmed).
    3. The transaction types have been defined using the standard profiles for Text Det. Procedure, Partnet Determination Procedure, Status Profile. The Partner Function ORG is set to Sold-To-Party , The date profile is a SRV_SLA_ITEM and the Action profile is set to SLFN0001_ADVANCED. The Org Data Prof is set to a customer defined one: ZSSC000000001.
    4. I have checked transaction ppoma_crm and the org structure and my user is assigned to a team lead position.
    Your assistance is greatly appreciated.
    Michael

    Hi Michael,
    please check your status profile for the "lowest status no." and "highest status no." values of the status values as Alex mentioned!
    You can find this in SPRO under "SAP Solution Manager> Scenario-Specific Settings>Service Desk>Service Desk>Status Profile".
    If the "high" value of the status "New" is lower than the status number of status "Customer Action" than you can not set the message from "New" to "Customer Action"!
    Hope this helps,
    Christoph

  • Unable to set the selected value for a ADF LOV

    Hi,
    I am developing an application using jdeveloper 10.1.3 and Struts.
    I have created a ADF LOV on my JSP Page as given below:
    <html:select property="lob" onchange="javascript:selectLOB(this.form)">
    <html:optionsCollection label="prompt" value="index" property="lob.displayData"/>
    </html:select>
    When i submit the form, i am able to get the value of the selected Value in the List.
    JUCtrlListBinding listBinding = (JUCtrlListBinding) formBean.get("Lob");
    Row r = (Row) listBinding.getSelectedValue();
    String SoLob = (String) r.getAttribute("LobLob");
    But i am unable to set the selected value back in the list when i return to the form again.
    I tried the following:
    int x = listBinding.getSelectedIndex();
    listBinding.setSelectedIndex(x);
    It would be really helpful if some one could let me know what needs to be done.
    Thanks,
    Subashini

    Gyan,
    I tried with the code you suggest , its trying to set the value of a field, but my requirement is to change the property for
    "Rendered" on the field so that based on search parameters we can hide result table column.
    After searching online, I modified the controller code as follows
    1.Created a new transient attribute (Testrender) with type "Boolean" and always updateable.
    2.changed the "Rendered" property value on the field I want to hide as ${oa.PoSearchVO1.Testrender}.
    3. Modified the controller code as follows :
            OAApplicationModule am = pageContext.getApplicationModule(webBean);
            OAViewObject testvo = (OAViewObject)am.findViewObject("PoSearchVO1");
            OADBTransaction txn = am.getOADBTransaction();
            if (testvo != null)
              OARow row = (OARow)testvo.first();
                if (a.equalsIgnoreCase("Approved"))
                     row.setAttribute("Testrender", Boolean.FALSE);
                else
                     row.setAttribute("Testrender", Boolean.TRUE);
            } But now when i run the page and populate the search field and click "Go" its hiding the field but throwing the following error and the search results are also bad.
    Its using only the value of one search parameter but not the second one .
    The search cannot be executed because the table has pending changes that would be lost. I think the vo is getting dirty when I update the transient attribute value. So I used txn.rollback ,then search is working fine but its not hiding the field.
    So can you please let me know how to proceed from here ?

  • Unable to set  kernel parameters using solaris 10

    HI,
    I'm trying to install DB2 8.2 on solaris 10.the problem i'm encountering in installation is unable to set MSGMAX and MSGMNB kernel parameters. I tried setting the new replacement parameter process.max-msq-qbytes through projects->Resource Control from the management console.but still uinable to set the parameters.
    Can anyone help me in setting the above kernel parameters.
    Its not possible to set it thru /etc/system.
    thanx
    guru

    HI,
    I'm trying to install DB2 8.2 on solaris 10.the problem i'm encountering in installation is unable to set MSGMAX and MSGMNB kernel parameters. I tried setting the new replacement parameter process.max-msq-qbytes through projects->Resource Control from the management console.but still uinable to set the parameters.
    Can anyone help me in setting the above kernel parameters.
    Its not possible to set it thru /etc/system.
    thanx
    guru

  • Unable to set kernel parameters using Reource Control

    HI,
    I'm trying to install DB2 8.2 on solaris 10.the problem i'm encountering in installation is unable to set MSGMAX and MSGMNB kernel parameters. I tried setting the new replacement parameter process.max-msq-qbytes through projects->Resource Control from the management console.but still uinable to set the parameters.
    Can anyone help me in setting the above kernel parameters.
    Its not possible to set it thru /etc/system.
    thanx
    guru

    I finally had some time to find the actual syntax for tuning process.max-msq-qbytes and process.max-msg-messages. prctl will change those paramaters for an existing process.
    As a proof of concept I changed process.max-msg-messages to a 64k. process 2221 is my shell.
    prctl -n process.max-msg-messages  -r -v 64k 2221
    bash-3.00# prctl 2221
    process: 2221: -csh
    NAME    PRIVILEGE       VALUE    FLAG   ACTION                       RECIPIENT
    process.max-port-events
            privileged      65.5K       -   deny                                 -
            system          2.15G     max   deny                                 -
    process.max-msg-messages
            privileged      64.0K       -   deny                                 -
            system          4.29G     max   deny                                 -
    process.max-msg-qbytes
            privileged      64.0KB      -   deny                                 -
            system          4.00GB    max   deny                                 -And now to make this persist across reboots...
    So long as I'm experimenting, I'll use projadd and add a new project which just includes me and not the rest of the users in the group staff.
    bash-3.00# projadd -p 115 -U testuser \
    -K "process.max-msg-messages=(priv,64K,deny)" \
    -K "process.max-msg-qbytes=(priv,64K,deny)" \
    user.me This creates the following /etc/project:
    (note the last line is all on one line in the real file minus the \.)
    placer% cat /etc/project
    system:0::::
    user.root:1::::
    noproject:2::::
    default:3::::
    group.staff:10::::
    user.me:115::testme::\
    process.max-msg-messages=(priv,64000,deny);process.max-msg-qbytes=(priv,65536,deny)After a reboot I checked the values by loging in under my user and running prctl.
    placer% prctl $$
    process: 419: -csh
    NAME    PRIVILEGE       VALUE    FLAG   ACTION                       RECIPIENT
    process.max-port-events
            privileged      65.5K       -   deny                                 -
            system          2.15G     max   deny                                 -
    process.max-msg-messages
            privileged      64.0K       -   deny                                 -
            system          4.29G     max   deny                                 -
    process.max-msg-qbytes
            privileged      64.0KB      -   deny                                 -
            system          4.00GB    max   deny                                 -
    process.max-sem-ops
            privileged        512       -   deny                                 -
            system          2.15G     max   deny                                 -
    ...Solaris 10 has different tunables and default values from 8 and 9. It's default tunables should be good for most applications per a given system's hardware. There are some great blog articles, and discussions on opensolaris.org and blogs.sun.com on tuning that explain the intent of tuning and why we shouldn't have to tune.
    Cheers,
    ~~sa

  • Unable to set kernel parameters using Reource Control in solaris 10

    HI,
    I'm trying to install DB2 8.2 on solaris 10.the problem i'm encountering in installation is unable to set MSGMAX and MSGMNB kernel parameters. I tried setting the new replacement parameter process.max-msq-qbytes through projects->Resource Control from the management console.but still uinable to set the parameters.
    Can anyone help me in setting the above kernel parameters.
    Its not possible to set it thru /etc/system.
    thanx

    HI,
    I'm trying to install DB2 8.2 on solaris 10.the problem i'm encountering in installation is unable to set MSGMAX and MSGMNB kernel parameters. I tried setting the new replacement parameter process.max-msq-qbytes through projects->Resource Control from the management console.but still uinable to set the parameters.
    Can anyone help me in setting the above kernel parameters.
    Its not possible to set it thru /etc/system.
    thanx

  • [CUPS] Unable to set my new CUPS server with an HP printer (solved)

    Hello,
    I come from Gentoo and I just installed my new Arch Linux server on a notebook with 2 NIC ... Now, I'm trying to set the CUPS deamon to share printer (HP DESKJET 895Cxi) for 3 workstations in my LAN. Before, it was working (printer and linux ... has never been very good...). But now, I'm not able, and it's about 1 hour I'm looking for a stupid error that I don't know if it's important or not ...
    (all is on my Wiki : http://pix-mania.dyndns.org/mediawiki/index.php/Cups)
    Here are a list of installed package : cups ghostscript gsfonts hplip
    The printer (USB) :
    (lsusb)
    Bus 002 Device 004: ID 03f0:0004 Hewlett-Packard DeskJet 895c
    (dmesg)
    usb 2-2: new full speed USB device using uhci_hcd and address 4
    usblp0: Disabling reads from problematic bidirectional printer
    usblp0: USB Unidirectional printer dev 4 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0004
    Current configuration (only change made to original configuration) :
    Listen <ip_serveur>:631
    <Location />
    Order allow,deny
    Allow From all
    </Location>
    <Location /admin>
    Order allow,deny
    Allow From all
    </Location>
    <Location /admin/conf>
    AuthType Default
    Require user @SYSTEM
    Order allow,deny
    Allow From all
    </Location>
    When starting cups service, all is fine : I can use a workstation to browse the Web Interface ... but printer seems to be not detected since it tells "No printers." when clicking on "Printers" tab. So, I go to "Administration" tab and, under "Printers", I click the "Find New Printers" and again, it says : "No printers found.".
    Not goot ... so, like I was doing with Gentoo, I click on "Add Printer" ... then, I receive a redirection to HTTPS ... click on the link (or wait) and nothing happend (timed out): web interface is broken for HTTPS ... I really got no idea why HTTPS is not working .
    After that, when updating the configuration (with vim) and restarting the service, deamon won't stop and I have to send a "kill -9" to the cupsd pid ...
    I look in log and I can just see this :
    E [09/Jan/2011:18:19:55 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    I googled for one hour, but is not more working right now ...
    Some questions :
    - the printer is not detected? Is it because of the ACLs errors ?
    - what the hell is "ACLs" for cups ? Never seen that before ...
    So, right now, I got a working HTTP but not working HTTPS, with no printer available ... very useless
    This printer is working "well" with cups, since it's an old model and it's a HP printer, so is "fully?" working on Linux ...
    Any idea on what to do/try now ?
    EDIT: after that message, I just refresh the page (I'm using Chromium) and ... magically, HTTPS was working (after accept untrusted certificate for HTTPS?) ... Then, go back to "Find New Printers" and now, it was working. Printer has been added ... Seems to be OK, but the "Print Self Test Page" doesn't work right now because of this :
    Unsupported format 'application/vnd.cups-command'!
    Current log file :
    E [09/Jan/2011:18:19:55 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    E [09/Jan/2011:18:24:48 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    E [09/Jan/2011:18:29:08 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    E [09/Jan/2011:18:36:28 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    E [09/Jan/2011:18:36:42 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    E [09/Jan/2011:18:41:06 +0100] Unknown SystemGroup "sys root lpadmin" on line 13, ignoring!
    E [09/Jan/2011:18:41:06 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    E [09/Jan/2011:18:42:24 +0100] Unknown SystemGroup "lpadmin" on line 14, ignoring!
    E [09/Jan/2011:18:42:24 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    E [09/Jan/2011:18:45:12 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    E [09/Jan/2011:18:47:32 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    E [09/Jan/2011:18:48:35 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    E [09/Jan/2011:18:49:35 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    E [09/Jan/2011:18:59:46 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    E [09/Jan/2011:19:33:06 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
    E [09/Jan/2011:19:33:06 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
    E [09/Jan/2011:19:33:06 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
    E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
    E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
    E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
    E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
    E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
    E [09/Jan/2011:19:33:37 +0100] [CGI] Unable to create avahi client: No such file or directory
    E [09/Jan/2011:19:33:37 +0100] [cups-deviced] PID 2744 (dnssd) stopped with status 1!
    E [09/Jan/2011:19:33:37 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
    E [09/Jan/2011:19:34:09 +0100] [CGI] Unable to create avahi client: No such file or directory
    E [09/Jan/2011:19:34:09 +0100] [cups-deviced] PID 2763 (dnssd) stopped with status 1!
    E [09/Jan/2011:19:39:51 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
    E [09/Jan/2011:19:39:52 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    E [09/Jan/2011:19:41:23 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    E [09/Jan/2011:19:44:49 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
    E [09/Jan/2011:19:47:16 +0100] Returning IPP client-error-document-format-not-supported for Send-Document (ipp://localhost:631/printers/HP_DeskJet_895C_USB_ES89M230MKGO_HPLIP) from localhost
    E [09/Jan/2011:19:49:36 +0100] Returning IPP client-error-document-format-not-supported for Send-Document (ipp://localhost:631/printers/HP_DeskJet_895C_USB_ES89M230MKGO_HPLIP) from localhost
    EDIT2: tried to print "Print Test Page" instead of the above ... and got these errors :
    (web interface)
    "/usr/lib/cups/backend/hp failed"
    (error_log)
    E [09/Jan/2011:20:08:31 +0100] [CGI] Unable to create avahi client: No such file or directory
    E [09/Jan/2011:20:08:31 +0100] [cups-deviced] PID 3126 (dnssd) stopped with status 1!
    D [09/Jan/2011:20:09:16 +0100] [Job 5] perl: warning: Setting locale failed.
    D [09/Jan/2011:20:09:16 +0100] [Job 5] prnt/backend/hp.c 559: dBus Connection Error (Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)!
    D [09/Jan/2011:20:09:16 +0100] [Job 5] perl: warning: Please check that your locale settings:
    D [09/Jan/2011:20:09:16 +0100] [Job 5] LANGUAGE = (unset),
    D [09/Jan/2011:20:09:16 +0100] [Job 5] LC_ALL = (unset),
    D [09/Jan/2011:20:09:16 +0100] [Job 5] LANG = "fr_FR.UTF-8"
    D [09/Jan/2011:20:09:16 +0100] [Job 5] are supported and installed on your system.
    D [09/Jan/2011:20:09:16 +0100] [Job 5] perl: warning: Falling back to the standard locale ("C").
    D [09/Jan/2011:20:09:16 +0100] [Job 5] GhostScript extra search path ('GS_LIB'): /usr/share/cups/fonts
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'job-uuid=urn:uuid:e4395221-1209-32a9-5add-30f7945eaa6b'
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option job-uuid=urn:uuid:e4395221-1209-32a9-5add-30f7945eaa6b.
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'job-originating-host-name=localhost'
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option job-originating-host-name=localhost.
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'time-at-creation=1294600145'
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option time-at-creation=1294600145.
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'time-at-processing=1294600145'
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option time-at-processing=1294600145.
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'AP_D_InputSlot='
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option AP_D_InputSlot=.
    D [09/Jan/2011:20:09:16 +0100] [Job 5] prnt/backend/hp.c 625: ERROR: 5021 device communication error!
    D [09/Jan/2011:20:09:16 +0100] [Job 5] GPL Ghostscript 9.00: Unrecoverable error, exit code 1
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Process 3154 ending: "gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=5..."
    D [09/Jan/2011:20:09:16 +0100] [Job 5] renderer return value: 1
    D [09/Jan/2011:20:09:16 +0100] [Job 5] renderer received signal: 1
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Process dying with "Possible error on renderer command line or PostScript error. Check options.", exit stat: 3
    D [09/Jan/2011:20:09:16 +0100] [Job 5] error: No such file or directory (2)
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Cleaning up ...
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3153 (KID4) with signal 15
    D [09/Jan/2011:20:09:16 +0100] [Job 5] KID3 exited with status 3
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Renderer exit stat: 3
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3153 (KID4) with signal 9
    D [09/Jan/2011:20:09:16 +0100] [Job 5]
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Closing foomatic-rip.
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Renderer process finished
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Process dying with "Error closing renderer", exit stat: 3
    D [09/Jan/2011:20:09:16 +0100] [Job 5] error: (0)
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Cleaning up ...
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3152 (KID3) with signal 15
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3152 (KID3) with signal 9
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Error closing renderer
    D [09/Jan/2011:20:09:16 +0100] [Job 5]
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Closing foomatic-rip.
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Backend returned status 4 (stop printer)
    D [09/Jan/2011:20:09:16 +0100] [Job 5] Printer stopped due to backend errors; please consult the error_log file for details.
    D [09/Jan/2011:20:09:16 +0100] [Job 5] End of messages
    D [09/Jan/2011:20:09:16 +0100] [Job 5] printer-state=5(stopped)
    D [09/Jan/2011:20:09:16 +0100] [Job 5] printer-state-message="/usr/lib/cups/backend/hp failed"
    D [09/Jan/2011:20:09:16 +0100] [Job 5] printer-state-reasons=paused
    E [09/Jan/2011:20:14:21 +0100] [Job 5] Stopping unresponsive job!
    EDIT3: I tested the ppd from cups (and not hpijs) and got the same problem ... The latest idea was to unplug USB and plug to another USB ... and it seams to works ... Now, the test page print "fine" ...
    So, I shared the printer over my LAN, and tried to print from a workstation ... it works fine now ... when looking error_log, I can see than there is no more Ghostscript error .
    But I have a last question .. if somebody can answer ... When choosing a PPD file, I have the choice between 3 version :
    - hpijs, 3.10.9
    - hpijs, 3.10.9.11
    - hpcups, 3.10.9
    Don't know why onlyl the HPIJS got the ".11" and not any others ... I selected this one and here is what Cups say about the printer :
    HP_DeskJet_895C_USB_ES29Z231JKGO_HPLIP HP DeskJet 895C Local Printer HP Deskjet 895c hpijs, 3.10.9.11 Idle - "ready to print"
    I hope when upgrading the system, I will not get error from PPD file not found ... With my current PPD file, I get (really not sure) this error, but print is working so, it doesn't matter :
    E [09/Jan/2011:21:08:04 +0100] [CGI] Unable to create avahi client: No such file or directory
    E [09/Jan/2011:21:08:04 +0100] [cups-deviced] PID 5705 (dnssd) stopped with status 1!
    E [09/Jan/2011:21:08:09 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    Thanks for all .. hope you don't think I'm crazy ^^
    Last edited by loopx (2011-01-09 20:31:21)

    WD and their lack of support for Mavericks:
    A recent email from WD reads:
    Dear WD Registered Customer,
    UPDATE: November 1st, 2013
    As a valued WD customer we want to make you aware of new reports of Western Digital and other external HDD products experiencing data loss when updating to Apple's OS X Mavericks (10.9). WD is urgently investigating these reports and the possible connection to the WD Drive Manager, WD Raid Manager and WD SmartWare software applications. Until the issue is understood and the cause identified, WD strongly urges our customers to uninstall these software applications before updating to OS X Mavericks (10.9), or delay upgrading. If you have already upgraded to Mavericks, WD recommends that you remove these applications and restart your computer. If you have already upgraded to Mavericks and are experiencing difficulty in accessing your external hard drive, please do not save anything to the drive, disconnect the drive from your computer, and contact Western Digital Customer Service at http://support.wd.com/country/ for further assistance.
    The WD Drive Manager, WD Raid Manager, and WD SmartWare software applications are not new and have been available from WD for many years. However, solely as a precaution WD has removed these applications from our website as we investigate this issue.
    Sincerely,
    Western Digital
    Which is basically Western Digital informing you that their out-of-date utilities don’t support Mavericks.
    In any case those utilities are not the most effective. The moral of the story is: the first thing you should do after buying a WD drive is to format it as HFS Extended (Journaled) and not install ANY of their utilities but instead use reliable applications like CarbonCopyCloner or SuperDuper - or Time Machine.

  • Unable to set a top-level property object

    Hey guys
    I've made a little sequence to fetch data from a XML file. In that XML file, there is some informations (entries) (IP addresses, port numbers, etc) about 4 different types of devices(sections are the devices names). The first section of the XML tells me the NAMES of the devices I have to configure. The type of each device is located in the entries of each device. Each device has its own information and I can have more than one device of a type. In teststand, I've created custom data types (containers with empty fields) for each type of device I need.
    I want to dynamically create the devices that the XML file tells me to configure as fileglobal variables and populate them with their own config informations (entries of the XML file). I'm creating new fileglobal of the type I want using PropertyObject step and I'm creating an alias of that fileglobal that I'm passing in parameter to a subsequence who's getting infos from XML. Here, everything is OK.
    The problem occurs when I want to configure 2 or more objects of the same type. At the SetProperty step (where i'm creating the fileglobal variable) teststand gives me the error:
    "Unable to set a top-level property object to another object. Error accessing item 'Parameters.DeviceToInitStruct'."
    Is there any ways to avoid that problem and creating to variable of the same type ?
    thanks

    Hi
    I finally got rid of that problem.
    Instead of using a PropertyObject.Clone step, I used a statement who's just copy the "MasterObject" into a "CloneObject" and i'm working with that copy. So the sequence can now create devices of the same type without any conflict with the first device.
    i'll post here a short example to show how i did... maybe it'll be useful for someone...
    regards

Maybe you are looking for