Unable to 'set the default source system' to Install Business Content

Hi,
Maars here. This is my first post hoping that in future ones I'll also be lending a helping hand.
I am trying to 'Install Business Content' under the BUSINESS CONTENT section in txn RSA1. I am doing this after 'Transfer Data Sources' in R/3 and I can now see all the data sources (under the application component hierarchy) for the source system. But I am not able to see the Info Objects in the Business Content.
When I try to set R/3 as the default source system (got this screen after clicking a icon in the standard tool bar), BW is not saving the settings ie., I set the R/3 as the default and then click on OK. If I go back to the same screen again, I find that my settings were NOT saved.
Could you please help me out?
Thank you.

Hi,
It seems to be a bug in version 3.5.
Do like this:
After you open the screen to <i>choose the dafault source system</i>
Clcik on 3rd button(F6) available in the bottom of the scrreen.
And then select teh tick mark for required system.
And then click on Continue button
You have do this step before you drop the cube to right side of the cube.
Ok, even after all these steps , if you reopen the screen you would not see Tick mark u have done just before. DONOT WORRY ABT it.
Drag and drop required cube with dat flow before.
Now you can see the Transfer rules with selected Source system only in the collected Objects.
With rgds,
Anil Kumar Sharma .P

Similar Messages

Unable to set the default sending account in Mail?

I have three IMAP accounts set up in Mail and when I want to send an outgoing email can easily use the drop down to pick which account is used. The issue is I'd like to specify which of the three is used by default. I've searched on how to do this and the supposed answers are not working for me.
First, in Mail preferences, it's been posted you can drag the order of the accounts. That does not work for me at all, they are not draggable.
Second, in System Preferences there's been some talk of setting defaults in the Mail, Contacts & Calendars panel. When I try to access one of the accounts there it asks me for the password, I enter the correct one, and it fails saying unable to verify the password.
Can this be done at all? Is there a bug in System Preferences?
Thanks in advance!

Spinland,
Try this and see if it helps you....
this was posted by victoryhat in another discussion on Lion. This is what I have done and it worked for me.
http:/https://discussions.apple.com/message/18677085#18677085

Is there a way to set a default "Source Range" in AME when exporting from Premiere Pro CC?

When exporting a sequence from Premiere Pro CC, you are able to toggle between 4 drop down options within Adobe Media Encoder on what Source Range you'd like to export (Work Area, Sequence In/Out, Entire Sequence, Custom) as seen here:
Is there a way to set the default Source Range to something besides Sequence In/Out?
My reason for asking is that sometimes I export multiple sequences at once using AME's Queue. I add my custom presets to each Sequence and hit export, but SOMETIMES I may have accidentally marked an in point on my timeline and by default it's set to export only that In-to-Out part of the sequence.
I know what you may be thinking...well, just don't add any In/Out points to your sequence on the timeline or clear them first. The trouble is that I often don't see them or catch them when working quickly. In Premiere Pro CC, I use the "Lighter Brightness" Appearance setting because it's easier on my eyes after editing 10 hours a day, 6 days a week. Sure, darker looks cooler, but it kills my eyes for some reason. Anyway, PPro CC has a troublesome appearance issue in CC where it's not "optimized" for editing when you change it to a lighter appearance like it was in CS6. I've already contacted Adobe about this and another appearance issue (involving highlighted clips when in Lighter Appearance setting) and they are "actively working on fixing this appearance issue asap".
For reference, here's Premiere Pro CC in/out points in default dark appearance (notice the slightly lighter grey area):
Now here's that same in/out in "Lighter Appearance":
Not exactly optimized. Can hardly see it. Good luck spotting that little guy on a long timeline. Sadly, this affects in/out points in the Source Window as well. Really hard to see.
Conversly, CS6 looked the best (the blue REALLY stands out making things easy to see):
So my question again...is there a way to set the default "Source Range" to something else besides Sequence In/Out so that I don't end up doing what I just did and leaving for several hours while batch exporting only to come back and find that I exported only a "portion" of one of my big sequences?
Thank you!

shooternz wrote:
Here is the solution: Slow down. Give your project some love. Smell the roses.
Agreed about the roses but alas my next project always calls. Actually, I think what happens is I give each project SO much love that when it comes to exporting, I've run out of time.
shooternz wrote:
Then it would not be a default...it would be an option and you already have that option.
Semantics aside, I would love to be able to have it at least default to whatever option was last chosen. Or, perhaps I shouldn't use the word default again...I'd love it to simply remember my preferred setting. That's all.

Source System Assignment while Installing Business Content

Hi,
I have a new R/3 source system in BW (one R/3 system already exists). When I'm installing business content for say an Infosource and before, even with a succesful install , the new source system assignment is not taking place in the infosource and neither are the packages (for the new source system) being installed. The datasource (for the new source system) remains unassigned.
Please Advice
Thanks

Hi Shurobhi
with your new R/3 source system are you able to see the datasources - using right clik on source system & then select datasources overview. IF not then you need to check if the source system connection is done with metadata repository replication or not. If that is also done then ensure that you have installed all business content datasources using RSA5 in your R/3 system.
On BW side, while installing transfer rules and infopackages, make sure that this new R/3 source system is checked on in source system Box - X icon on business content screen. Then only you would be able to see transfer rules and infopackages & install them.
Hope this helps
Regards
Pradip

System keeps re-setting the default app to Preview for iWork files.

Hello.
I've scoured the internet for a solution to this problem, but can't find one. The problem applies to Numbers, Pages and Keynote, and I am putting this post in the forum for each. I shall explain it using a Numbers file as an example.
For three or four years, I've had a file that was created in Numbers to be opened in Numbers; it's a spreadsheet that I update with every transaction of my bank account.
Until about a week ago, the file would always open in Numbers, its default application, and then the file kept opening in Preview instead of in Numbers. I checked the 'Get Info' panel and found that its default application was Preview. This was strange, so I changed it to Numbers. When I opened the file the next day, it again opened in Preview, and I found again that Preview was set as its default app. This time, I set Numbers as the default app by right-clicking on the file, selecting 'Open With', and Numbers wasn't on the list, so I went to 'Other...', and in the 'Choose Application' window, navigated to the Numbers app, selected it and activated the 'Always Open With' option.
As you would expect, the file then opens in Numbers. However, whenever the computer has been off and I have logged in again, the default app for the file has reverted to Preview.
The only thing I can think of that might have a bearing on this problem is a recent App Store purchase. I bought Numbers on an iWork '09 disk back in 2008/9, but about a week ago decided to uninstall the iWork apps with AppZapper and buy them from the App Store (I just like to have the App Store as the source of my apps, and I had some money to spare). I can’t see why this would cause the problem, but the installation of these apps and the start of the problem seem to co-incide.
I wondered if the problem could be solved by re-creating my spreadsheet in a new Numbers file, so I opened Numbers, selected a blank worksheet and pasted the spreadsheet from the original file into this new one, but it made no difference: the next time I logged into my system, Preview was the default app for the new file as well. The problem persists even with new files created in Numbers, Pages or Keynote that are unconnected with older files and after the App Store purchases.
I would be grateful for any advice the community can offer.
Thank you.

Hello again.
I followed your advice and created another user account, and in that one, Numbers, not Preview, was the default app for my Numbers file. Logging back into my original account, I deleted the com.apple.LaunchServices.plist file, and for good measure, the com.apple.LaunchServices.plist.lockfile as well, and reset Numbers as the default app for my Numbers file.
I restarted the system, but found that Preview was now the default app for the file. Perhaps the .plist file needed a second restarting of the system, so I set the default app for the file to Numbers again. I also put Pages, Numbers and Keynote into a new folder called iWork '09, as they used to be before I replaced my shop-bought iWork disk installations with the same apps bought form the App Store. I don't know if this made a difference. I restarted the system and, this time, the default app was Numbers.
Pages and Keynote are also now the default apps for files created by them.
You have been very helpful and I appreciate it. Thank you.

Unable to populate the default value using form personalization

Hi, I need to default a value in order managemnt for waybill number
shipping -- transaction - delivery - detail --
In Order management
Shipping - Transactions
Source system -- Order management
From Order number - Any ordernumber
say find
I want to default this Detail ( xxxxx) as Way bill
value of :DLVB.DETAIL_LABEL
I have put the following condition on form personalization
Condition tab
Triger event
When new record instance
Trigger object
dlvy_s
Processing mode both
Actions tab
Property
Object type Item
Target Object DLVY_S.WAYBILL
Property name Value
Value
:DLVB.DETAIL_LABEL
but it is not defaulting... Appreciate if any one has idea what is wrong in this.
Edited by: 885022 on Oct 3, 2011 11:31 AM
Edited by: 885022 on Oct 3, 2011 11:33 AM

yes Srini
as we dont have any option via personalization to set the default values ,it can be done through controller extension ,
in processRequest method of extended controllere get the control for that particular field where u want to set the default value and set the value using fieldbean.setValue(pagecontext,value);
in case of any particular case ,please post in the forum
thanx
Pratap

Changing the default logical system names for adaptive RFC models

Hello,
When I create an Adaptive RFC model the dialog that asks me to specify the model name, package, source folder, etc. has default values in the "Default logical system name for model instances" and "... RFC metadata".
I know I can type in another name there but I'd like to change the default name to something that fits our naming conventions. Can I change that? If so, can someone tell me where?
Thanks in advance!
David.

Suresh,
Thank you for your response. However, that is not what I was looking for. Sorry if my post was not clear.
I knew that I could change it AFTER the import. I also know that I can type in something else besides the default DURING the import.
What I am asking is if there is a way to change some configuration setting so that the 'default' that comes up in the drop down DURING the import is something different than what comes 'out-of-the-box' with NWDS.
Hope that clears up what I'm looking for.
David.
Message was edited by:
David Z. Pantich

BOFC Unable to start the data source

Hi there,
i've done a standalone install using SQL 2008 R2 express. But i'm unable to start the data source and get this error:
Failed to start data source
Failed to start server instances on machine DELL1.
Failed to initialize server configured on machine DELL1.
Class not registered
Thanks,
Anees

Ok, problem solved.
I had to create a seperate DCOM user and assign it to the following roles in windows:
log on as a batch job
log on as a service
then assign this DCOM user to the Ctbroker and CTserver. As i'm not running this on a domain, there was no need to use 'packet level authentication'. So i set the authentication level to none.
There was no need to use the web based admin interface. Ctadmin.msc worked perfectly.
Thanks,
Anees

Failed to set the EventLog source

Hi all,
I have encountered the following problem. During installation DS 5.2 on Windows 2000 I got message from installer: "Failed to set the EventLog source", but installaion continued. It looks that DS is installed, but I cannot start slapd and I can see the same message.
Thanks for any help

Thank Mayank for your reply
I'm not clear about the concept of "directory server instance name "
and I list the information to u:
Server Console Login Dialog:
User ID: cn=directory manager
Administration URL: http://xxx.com:40001
Information below is from Server Console:
Directory Server(xxx) (whole computer name is xxx.com)
Server name: Directory Server(xxx)
product name: Directory Server
Version: 5.2_Pathc_4
Build number:2005.230.0301
Security level:domestic
Server status: Started
Port:40000
Administration Server
Server name: Administration Server
Product name:Administration Server
Version:5.2.4
Build number:2005.206.2139
Security level:domestic
Server status: Started
Port:40001
and it can work on my machine(windows xp with sp2), but can't on that Server(windows 2003 with sp1), and Both are using default setting when setting up the Directory.
thanks ,
Time here is 2007-3-1 11:05. ^_^
Message was edited by:
fofw2000

SRM 4.0- How to set the default values for product type (01) only for SC

The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.

The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF

Microsoft Intune was unable to set the desired mobile device policy for one or more users due to the following error: A2CE0100

Hi!
We have fatal or critical error message on Microsoft Intune Portal but all agents are working just fine. Before opening support ticket we would like to hear comments from the experts on this forum. We would also like to fix this error before starting to
manage mobile devices with Intune.
Error message on Intune Portal:
"Microsoft Intune was unable to set the desired mobile device policy for one or more users due to the following error: A2CE0100"
Repeated: 19 times.
Class: (System) Policy
Random Fatal error message on C:\Program Files\Microsoft\OnlineManagement\Logs\PolicyAgent.log found from one Windows 8.1 client:
2015-02-21 08:49:20:704 2852 1ab0 FATAL: DocumentProvider::IndicateToConsumer/pp->ProcessPolicies(NULL, NULL, NULL, NULL) failed with error 0x800704d5.
That said, we are not facing any specific problem but we would like to find symptom of this repeating error message on Intune Portal . We would appreciate to get any thoughts about this case.
Br.
Jukka

Hi Jukka,
Mobile policy doesn't apply to clients using the Full Client download. Please open a support case so the team can assist in further troubleshooting.
Thanks,
Jon L. - MSFT - This posting is provided "AS IS" with no warranties and confers no rights.

Trying to programmatically set the data-source for a Crystal reports report.

I've got the following existing procedure that I need to add to in order to programmatically set the data-source (server, database, username, and password) for a Crystal reports report.
I added the connectionInfo parts, but can’t figure out how to attach this to the existing
this._report object.
This is currently getting the connection data from the report file, but I now need to populate this connection data from a 'config.xml' text file.
Am I trying to do this all wrong?
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using CrystalDecisions.CrystalReports.Engine;
using WGS.Reports.Reports;
using CrystalDecisions.Shared;
using WGS.Reports.Forms;
namespace WGS.Reports
public class ReportService
ReportClass _report;
ParameterFields paramFields;
ConnectionInfo connectionInfo; // <- I added this
public ReportService()
public void DisplayReport(string reportName, int allocationNo)
if (reportName.ToLower() == "allocationexceptions")
this._report = new AllocationExceptions();
PrepareConnection(); // <- I added this
PrepareAllocationExceptionReport(allocationNo);
this.DisplayReport();
private void PrepareConnection() // <- I added this
//test - these will come from the config.xml file
this.connectionInfo = new ConnectionInfo();
this.connectionInfo.ServerName = "testserv\\test";
this.connectionInfo.DatabaseName = "testdb";
this.connectionInfo.UserID = "testuser";
this.connectionInfo.Password = "test";
this.connectionInfo.Type = ConnectionInfoType.SQL;
private void PrepareAllocationExceptionReport(int allocationNo)
this.paramFields = new ParameterFields();
this.paramFields.Clear();
ParameterField paramField = new ParameterField { ParameterFieldName = "@AllocationNo" };
ParameterDiscreteValue discreteVal = new ParameterDiscreteValue { Value = allocationNo };
paramField.CurrentValues.Add(discreteVal);
paramFields.Add(paramField);
private void DisplayReport()
frmReportViewer showReport = new frmReportViewer();
showReport.ReportViewer.ReportSource = this._report;
showReport.ReportViewer.ParameterFieldInfo = paramFields;
showReport.ShowDialog();
showReport.Dispose();
Any help would be much appreciated.

Hi Garry,
Please post SAP Crystal Reports questions in their own forums here:
SAP Crystal Reports, version for Visual Studio
We don't provide support for this control now. Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Unable to open windows using boot camp. Get message "The bless tool was unable to set the current boot disk." Any thoughts, Thank you.

Unable to open windows using boot camp. Get message "The bless tool was unable to set the current boot disk." I am using an Imac , Lion operating system, and Windows 7. It worked a few days ago. Any thoughts, Thank you.

Note that nowhere in the Boot Camp instructions does it tell you to use Disk Utility to format the Windows partition. The Boot Camp Assistant program creates the partition & sets the +partition scheme info+ of the disk as appropriate for the Windows installer but the Windows installer itself is responsible for formatting the new partition with the appropriate +file system scheme+ (NTFS for Windows 7).
If you follow the instructions in the Boot Camp Installation & Setup Guide to the letter you should have no problems installing Windows.

How do I set the default welcome page for PUBLIC user

gurus,
i'm using -
Oracle 9i Database
Oracle 9ias Portal Release 2
QUESTION => how do I set the default welcome page for the PUBLIC user.
i did the following to achieve this -
1. logged into portal
2. clicked on builder
3. clicked on administer tab
4. selected PUBLIC user in the Portal User Profile portlet
5. went to the preferences tab
6. in the default home page selected a custom page group
7. logged out of portal
8. open a new browsere session
9. type the portal URL and i get the login page ....??
i'm unable to understand this behavior ... shouldn't i be getting the page group that i set for the PUBLIC user in step 6 above ....
the second QUESTION is => when the user logs out he/she should see the PUBLIC page set in step 6 above ... but, instead the user sees a page that is as follows -
Partner Application Name Logout Status [Logout Status]
Oracle Portal (portal) logout status
The SSO Server (orasso) checkmark
buzz.resva.trw.com:7778 checkmark
infrastructure.happy.resva.trw.com checkmark
portal1.buzz.resva.trw.com checkmark
portal2.sylvester.resva.trw.com checkmark
sylvester.resva.trw.com:7778 checkmark
so, how can i set the default page for the PUBLIC user and also a page when he user logs out.
ideas anyone ....?
thanx a bunch.
hero

Hi,
The sequence of operation you are doing to set the home page for public users is correct. You are getting the login screen as the "custom page group" selected as "home page" has not been granted to public.
Also, while logging-out, it is normal behaviour to get the screen where it shows the list of partner applications from where user has been logged-out. When you click on "Return" button, you will get to the "home page" set above.
Hope it clarifies the things.
Regards,
Ved

How do I set the default text in a bound textbox?

How do I set the default value of a bound textbox when the AddNewItem button on the MenuStrip is clicked?
I have the following code (see below), but for some reason it does work when I put the code in the
AddNewItem_Click event; however, it does work if I put it in the
Form's Load Event. The statement in question is Me.txtBusUsagePct.Text = 100.
What am I doing wrong? Why can't I set the default text in the AddNewItem_Click
event?
Private Sub BindingNavigatorAddNewItem_Click(sender As Object, e As EventArgs) Handles BindingNavigatorAddNewItem.Click
Me.txtBusUsagePct.Text = "100"
End Sub
BobV365

Hello,
Here I am using mocked up data but the important thing is after loading the data. Requires on the form a BindingNavigator and two text boxes.
Public Class Form1
WithEvents bsData As New BindingSource
Private Sub Form1_Load(
ByVal sender As System.Object,
ByVal e As System.EventArgs) Handles MyBase.Load
Using MockedData As New DataTable()
MockedData.Columns.AddRange(New DataColumn() _
New DataColumn("PartName", GetType(String)),
New DataColumn("partqty", GetType(Int32))
MockedData.Rows.Add(New Object() {"Part A", 100})
MockedData.Rows.Add(New Object() {"Part 99", 34})
MockedData.Rows.Add(New Object() {"Part B", 4})
bsData.DataSource = MockedData
End Using
CType(bsData.DataSource, DataTable).AcceptChanges()
BindingNavigator1.BindingSource = bsData
TextBox1.DataBindings.Add("Text", bsData, "Partname")
TextBox2.DataBindings.Add("Text", bsData, "partqty")
End Sub
Private Sub bsData_AddingNew(
ByVal sender As Object,
ByVal e As System.ComponentModel.AddingNewEventArgs) _
Handles bsData.AddingNew
Dim dv As DataView = TryCast(bsData.List, DataView)
Dim rv As DataRowView = dv.AddNew()
rv("PartName") = "(new)"
rv("partqty") = 0
e.NewObject = rv
bsData.MoveLast()
End Sub
End Class
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem. Contact via my webpage under my profile
but do not reply to forum questions.

Unable to 'set the default source system' to Install Business Content

Similar Messages

Maybe you are looking for