Unable to Set-Up ePrint for Deskjet 3050A

Hi,
I'ved my HP Deskjet 3050A for some time, however I've recently set it up using Wi-Fi, which I find amazing! Furthermore, I wanted to set up the ePrint service, so that I'm able to print remotely from other devices I use. I followed the instructions through the HP website and couldn't seem to get past Step 1.
Step one asks me to asks me to register an account with ePrint, which I have done. However, it then asks me for a 'Printer Claim Code'. This is where I seem to hit brick wall. It asks me to print a 'Web services information sheet'. To do this I must click the ePrint button on my printer and select 'Print Info Page'. However, when I do this I'm shown an error which reads...
"The printer could not connect to the Internet. Check Internet connection."
I then tried various other ways by looking through this forum, however they all seems to lead to the same problem. I can print fine through my computer using Wi-Fi.
Can anyone offer any support on this?
Printer: HP Deskjet 3050A
OS: Windows 8.1
Thanks,
Chris.

Hi Chris,
Welcome to the HP Support Forums.  I understand that when you are trying to enable the web services on your Deskjet 3050A printer that you are getting a connection error message.
Please start by setting a manual IP address and manual DNS servers for the printer.  I have included a link to another post with the steps, including screen shots, on how to do this.  Don’t stress that the screen shots are for a Photosmart 7510 printer, the steps are the same.
Please let me know how it goes.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Similar Messages

  • Unable to set import lock for software component version

    Hi team,
    While importing object (.tpz) file into integration repository we are getting error message as below.
    ======
    Unable to set import lock for software component version <XXXX>-COMMON,1.0 of <XXX>.com because user <userid> is currently importing data to this component
    try again once user <userid> has finished importing data
    =======
    We checked with the user and found he is not doing any activity in fact he logged off. the developer wants to import and how do we terminate this import attement and proceed with new importing of the  same object
    We wan't to avoid cache refresh as this is production environment
    We already performed clear SLD data cache with in the IR not for whole.
    Thanks
    Vijay

    Hi Vijay,
        Thefollowing threads speak about the locking issues with the IR objects .Hope this will help you out in resolving the issue.
    http://help.sap.com/saphelp_erp2005/helpdata/EN/93/a3a74046033913e10000000a155106/content.htm
    Internal lock version management : Unable to copy objects
    Thanks,
    Ram.

  • Unable to set node credentials for /LDAPv3/127.0.0.1 with record name n`.

    When starting Server Preferences, I receive a window with the following text:Unable to set node credentials for /LDAPv3/127.0.0.1 with record name n`. There may be an error with the Open Directory Service.
    This started to occur after I used the command changeip to change the ip of the service.
    I've tried (Re)starting Open Directory Service, but that doesn't resolve it.
    Does anyone know how I can resolve this error? I'd like to be able to user Server Preferences again!

    One of our servers (10.6.8)  that had been running for months suddenly started generating that error message when trying to access Server Preferences.  Workgroup Manager, which seems to use the same login information, accessed just fine. We tried deleting access information in Keychain, to no avail. What finally worked for US was:
    - Via Server Admin, (in Open Directory > Settings > General) change the Role: Open Directory from Master to Standalone
    - This (for us) then restored access to Server Prefs
    - Use Server Admin to change the Role back to Master
    Warnings - 1)  backup first  2) you will have to reinstall the master password, and  3) ALL accounts were lost and had to be recreated.

  • Rpc.nfsd: unable to set any sockets for nfsd

    Hi all!
    I have problem..
    [root@myhost ~]# /etc/rc.d/nfs-server restart
    :: Stopping rpc.mountd daemon [FAIL]
    :: Mounting nfsd filesystem [DONE]
    :: Exporting all directories [DONE]
    :: Starting rpc.nfsd daemon [BUSY]
    rpc.nfsd: unable to resolve ANYADDR:nfs to inet address: Servname not supported for ai_socktype
    rpc.nfsd: unable to set any sockets for nfsd
    My configs:
    - daemons in rc.conf
    DAEMONS=(syslog-ng crond network @adsl @iptables @sshd @rpcbind @nfs-common @nfs-server @alsa @cups !deluged hal @inadyn !netfs slim)
    - /etc/hosts.allow (server: 192.168.2.1, client: 192.168.2.2)
    sshd: 192.168.2.2/255.255.255.255
    ALL: 192.168.2.2/255.255.255.255
    - /etc/exports
    /home/kate/Torrents/ 192.168.2.2/255.255.255.255(rw,fsid=0,no_subtree_check,async)
    Any ideas?
    Last edited by gard (2010-09-11 07:18:35)

    I have same problem and i'm using networkmanager (notebook, wifi). My DAEMONS section on rc.conf:
    DAEMONS=(... networkmanager alsa kdm cups bluetooth rpcbind nfs-common nfs-server netfs autofs ...)
    When i try automatically connect on boot, i have same problem (but network work now without X starts, after console login).
    When i try
    [stepan@stepan-nb ~]$ sudo /etc/rc.d/nfs-server restart
    :: Stopping rpc.mountd daemon [FAIL]
    :: Stopping rpc.nfsd daemon [DONE]
    :: Unexporting all directories [DONE]
    :: Mounting nfsd filesystem [DONE]
    :: Exporting all directories [DONE]
    :: Starting rpc.nfsd daemon [DONE]
    :: Starting rpc.mountd daemon [DONE]
    after boot and login, everything works, but on boot nfs-server init script fails to start.
    Last edited by Tapan (2010-01-06 19:22:25)

  • Unable to set parent context for this record.

    Has anyone seen this error when doing an import? In my case I was doing an import to the Opportunity Product record.
    the full error message is
    Unable to set parent context for this record. Please make sure that the parent record is valid and you have permission to modify the parent record.
    I was attempting to populate one field on the record with data.

    Hi,
    Was there a resolution to this that you found, cause it's driving me crazy.
    We've resorted to manually created a product in OnDemand with an EUI and exported it but we can't reimport it to overwrite it as we get the same error message "Unable to set parent context for this record"
    The opty and the product both exist as they got manually created, although when you export them there are now 2 of them (I see this in reporting as well????)
    Besides the Opty-Product External ID what else is required to do an import to overwrite?
    regards
    Alex

  • Problem with XI objects transport - Unable to set import lock for SWC

    Hi guys!
    I try to import objects from dev to qa but I'm getting following error:
    Unable to set import lock for software component version SWC_xxxx , 1.0 of company.com because user OSALUDEW is currently importing data to this component Try again once user OSALUDEW has finished importing data
    The problem is, I'm not importing anything.. Well, I try to import, but something is hanging there from previous time.
    How to solve this issue?
    Thank you!
    Olain

    Well,
    I closed all the applications - repositories (dev, qa), directories (dev, qa), then started qa repository again and imported the objects successfully
    ....hmmm....
    Olian

  • Has anyone encounter this "unable to set node credentials for /LDAPv3"?

    Install and updated the Macmini server to 10.6.5. It working fine until try to access the Server Preferences and error message "unable to set node credentials for /LDAPv3/127.0.0.1 with the record name **." Looking at the logs and has servermgr_accounts got error 5203 trying to auth to local LDAP node. Has anyone found solution for this problem?
    Thanks
    Luis

    Thank you for responding. This is what we are using in a small company a Cisco Switcher, and don't have a router.
    If you're getting connections off of the network out to the Internet, then yes, there is a router involved. Somewhere.
    MacMini server I have an IP address of 169.254.xxx.xx, before IP address was 192.254.xxx.xx.
    That IP address implies that the box isn't getting an IP address from a DHCP server; that's the self-assigned block. (Officially, these addresses are in the Automatic Private Address Configuration Automatic Private IP Addressing (APIPA) IANA reserved range.)
    Which implies that at least two problems lurk.
    Mac OS X Server must have a static IP address. Not DHCP-assigned dynamic addresses.
    And a DHCP server isn't answering the IP address requests. (Well, not unless the DHCP server is passing out addresses in the self-assigned block, and that wouldn't likely be considered best-practice. More likely an IP address from a DHCP address pool allocated within a subnet somewhere in the 10.0.0.0/8 or 172.16.0.0/12 or (less desirably) 192.168.0.0/16 private blocks.
    The Firewall is not turned on. Its purpose is for guest to access files, without deleting or modifying it.
    When you're debugging problems, simplify. Divide the problem. With network services, test the lowest levels of the stack. Then work your way up the stack; toward higher-level services and mechanisms. Then add more parts and pieces, and DHCP and related.
    IP hosts operating at 169.254.0.0/16 addresses (for longer than it takes to get an IP address from DHCP) usually implies that the network configuration is invalid or the DHCP server is not working.
    I did not expect that Open Directory would be a big problem.
    If DNS services or IP routing is misconfigured, then the whole rest of the stack will be unstable at best. The configuration order (and debugging order) involves functional IP networking and hardware, first and foremost. Then having functional DNS. Then Open Directory and then Kerberos. Then the rest of the stack.

  • Replacement Power Cables for Deskjet 3050A Printer

    I have recently dug up my old printer, a HP Deskjet 3050A. However, I could not find any of the cables required to use it.
    I am looking to get a set of replacement cables, however I haven't been able to use the HP website as I couldn't find my item serial number. I have been unable to get in touch with HP because of this.
    Any advice on where to go/who to contact would be much appreciated.

    HP does not list the power adapter (or any other parts for the Deskjet 3050a) on their Partsurfer Site, but I have had good results in the past buying printer power adapters from eBay.  The results here may help.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Unable to set email address for user MySite in SharePoint2013

    Hi,
    I've a SharePoint Ent farm with a MySite Host Site Collection created. Under that, I've got some users having their own MySites.
    Now, the problem is, I'm unable to get the link for editing the user's email address after logging in to the MySite under the credentials of the particular user. 
    Can anybody please suggest. Is this field at all editable?
    Thanks,
    Arnab

    Hi John,
    Elaborating...
    I've created a MySite Host Site Collection programmatically, say, http://test.mysitehost.local/.
    Under the same I'm creating user mysites (through SharePoint2013 Object model), say, http://test.mysitehost.local/personal/user1. (for my case "personal" is the managed path). While creating the user mysites, I'm not passing any value for the email
    address of the user. 
    Now, my question is, can I set the email address of the user from MS native portal or through powershell?
    Please note, I'm using SharePoint2013 Server.
    Thanks in advance,
    Arnab

  • Unable to set default program for .pdf

    CURRENT PROBLEM:
    As show in print screen, when i attempt to set default program nth happens at all. The only way i can open any .pdf file now is by 1st opening adobe reader 9 and select the .pdf file manually
    INITIAL STAGE OF PROBLEM:
    Problem started after upgrading to windows 7 from vista. Windows 7 is able to recognise adobe reader 8 as a valid default program since it is in windows.old. Thus the default for .pdf is adobe reader 8 (it was installed in vista).
    Subsequently, installing adobe reader 9 isof  no use as it will be ignored and windows 7 will only continue to use adobe reader 8 as the default reader when i try to open a .pdf file, unless if i manually opened adobe reader 9 and selected a .pdf file manaually
    However, I am unable to uninstall adobe reader 8 as the "program and feature" can only identify adobe reader 9 and does not think that adobe reader 8 exists.
    ATTEMPTs TO SOLVE:
    Thus, I removed windows.old by using the disk cleanup. However, I am still unable to set adobe reader 9 as the default reader. Instead, .pdf are no longer accessible/"open-able" unless I 1st opened adobe reader 9 and then selected a .pdf manaually.
    I've attempted reinstalling and restarting comps etc, they dun seem to help. I suspect the OS is now only able to recognise adobe reader 8 from windows.old as a valid program directory due to some registry issues since it was initally set as the default when i 1st upgraded the OS. Now that adobe reader 8 is removed, there might be some corrupted registry somewhere that needs to be set right again?
    Really need help with this. Thanks a million.

    Thanks guys for showing interest in helping.
    As you guys can see, there's no adobe reader when u expand. Also, I already browsed the reader just in case too. Thus expanding doesnt help. =(
    Also, I cant seem to find the "file type" tab in folder options

  • 206 unable to set alert only for certain group

    Hi,
    is it a symbian unwanted feature that user is unable to set Nokia 206
    profile to alert for certain group (even though this kind of functionality is
    available on this phone)?
    To be more precise user is able to set profile to alert only for certain
    group but this setting has no effect (phone rebooted, groups recreated, etc. no effect)
    This feature has been available and workin in previous Nokia phones
    since last decace - is it a software quality issue or what.
    Best regards,
    Hez

    It is the Application Pool account making the query to retrieve the groups, so you would need to establish a trust from Domain B -> A.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Unable to set search context for AD resource

    Hi,
    I am unable to set a search context into my AD resource (IdM 8.1 patch 9, AD gateway).
    When I traced the gateway - I found it completely ignores the context filter values I defined.
    Anyone has solution?
    R.

    Hi,
    I am not talking about a query but about a regular AD resource configuration - so there is no code to provide.
    Try putting a context in AD resource (to search for specific type of users for example) and see if it works.
    R.

  • I am unable to set up eprint. i get error message that email address is already registered.

    I have HP Photosmart 5510 printer.  I have never been able to set up eprint features.  When I try to sign in, I get a message saying that email address is already in use.

    Hi there Tomsks;
    OK have you tried loging with the credentials you created in Snapfish.com on the hpeprintcenter.com.
    Let me know if after that you still facing this issue I help in any way I can.
    Hope this helps!
    RobertoR

    You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

  • Unable to set GL Account for each ItemGroup in Inventory

    Hi,
    I am Using SAP b1 2005b Patch level 27.
    I created one database with "Chart of Accounts INDIA."  then I got Default Chart of Accounts.
    I want to set GL Account for each ItemGroup in Inventory.
    How to assign the Perticular GL Account for Particular Item Group? where can i find this provision in SAP b1?
    I am trying from past 2 days, I did not get the way to assign the GL Account for each Item Group.
    Plz help me asap.
    Regards,
    Nagababu.

    Hello,
    you can set it in the module administration --> setup --> inventory --> item group --> tab accounting. But first you must define the name of item group. it is still in the same form.
    let me know if problem still persists. G'luck.
    Rgds,

  • Unable to set up video for editing

    I am a novice and am using the trial version of Premiere Elements 8.  I have gone through the Using Adobe Premiere Elements 8 product support quite a few times over the past several days and am not able to figure out how to set up videos for editing.
    When I am in Elements Organizer, the various files on my hard drive show on the left.  Two video files converted to MPEG show in a middle column.  I can play them by double clicking on them.  However, I am totally lost on how to set them up so that I can edit them (cutting into clips, improving lighting, etc).  Would someone please let me know either how to set up my videos for editing or let me know where there are help discussions or tutorials.
    Thanks for any help.
    Steve Gillings

    Steve,
    You are in the Elements Organizer, which more like a catalog manager and not a video editor.
    One of the ways to start editing is as mentioned by John in the post above.
    The other way is to launch Adobe Premiere Elements directly which can be done simply by clicking the desktop icon and selecting new project option
    OR you can run the AdobePremiereElements.exe from your install location.
    I see that you have installed the tryout version for Elements 8, that is last year's version, Elements 9 is already out, its better that you try the latest version. A lot of us on the forum have started using it.
    cheers.

Maybe you are looking for

  • Music sound gets low while earphones are plugged in.  To fix it I have to slide the music progress bar.

    When listening to music with any pair of headphones or earphones plugged in, all of a sudden the volume will get really low for no reason.  Example: say the volume is at 15.  All of a sudden the volume will drop to like a 4, but the volume slider is

  • ERROR: No connect due to DbSl Load Lib Failure

    Hi Everyone, I am working on EHP 7 upgrade and currently at Extraction phase of SUM tool. There are numerous issues i have faced and resolved one by one. now i got stuck in this error       Severe error(s) occurred in phase PREP_INPUT/CONFCHK_IMP!   

  • Dragonwriter 48X16X48

    This is my first CD burner, so maybe I'm just doing something wrong here.  I'm trying to use InCD to use my CD-RW's like a floppy drive.  I can't seem to accomplish this. For instance, when I create a new Word document and goto Save as... I'm able to

  • Fixed vendor in source list not recognized by MRP

    Hi I have a source list (ME01) with a listed info record for a particular plant/purch.orgvendor/material combo. I have ticked the fixed vendor tick and flagged it as MRP relevant (MRP=1). When I run the MRP the purchase requisition is created but the

  • SAP Note implementation 412391

    Hi Friends I got the note from my client side that we have to apply ths note 412391. But when I am trying to search this note it is showing that the note is not yet released. Then i got the same text note from SAP. They replied me by saying please re