Unable to set up iOS app remote control

Hello.
Since updating to Lion and iTunes 10.4, I have been unable to connect iOS apps (on iPod/iPhone/iPad) to iTunes. In Preferences -> Devices, the option to look for remotes is gone, and replaced with the text "iTunes is not paired with any remotes". I have searched for a remedy for this issue online without results. Is there something obvious that I'm missing?
Regards
Snorre

Replying to my own question: Problem solved. I went to "Settings" in the iOS Remote app and deleted the settings for my iTunes library. I noticed that Home Sharing was disabled. I re-enabled it, entered my iTunes account user name and password, and now all is well! The library is again available on all my iOS devices.
Regards
Snorre

Similar Messages

  • Unable to set kernel parameters using Reource Control

    HI,
    I'm trying to install DB2 8.2 on solaris 10.the problem i'm encountering in installation is unable to set MSGMAX and MSGMNB kernel parameters. I tried setting the new replacement parameter process.max-msq-qbytes through projects->Resource Control from the management console.but still uinable to set the parameters.
    Can anyone help me in setting the above kernel parameters.
    Its not possible to set it thru /etc/system.
    thanx
    guru

    I finally had some time to find the actual syntax for tuning process.max-msq-qbytes and process.max-msg-messages. prctl will change those paramaters for an existing process.
    As a proof of concept I changed process.max-msg-messages to a 64k. process 2221 is my shell.
    prctl -n process.max-msg-messages  -r -v 64k 2221
    bash-3.00# prctl 2221
    process: 2221: -csh
    NAME    PRIVILEGE       VALUE    FLAG   ACTION                       RECIPIENT
    process.max-port-events
            privileged      65.5K       -   deny                                 -
            system          2.15G     max   deny                                 -
    process.max-msg-messages
            privileged      64.0K       -   deny                                 -
            system          4.29G     max   deny                                 -
    process.max-msg-qbytes
            privileged      64.0KB      -   deny                                 -
            system          4.00GB    max   deny                                 -And now to make this persist across reboots...
    So long as I'm experimenting, I'll use projadd and add a new project which just includes me and not the rest of the users in the group staff.
    bash-3.00# projadd -p 115 -U testuser \
    -K "process.max-msg-messages=(priv,64K,deny)" \
    -K "process.max-msg-qbytes=(priv,64K,deny)" \
    user.me This creates the following /etc/project:
    (note the last line is all on one line in the real file minus the \.)
    placer% cat /etc/project
    system:0::::
    user.root:1::::
    noproject:2::::
    default:3::::
    group.staff:10::::
    user.me:115::testme::\
    process.max-msg-messages=(priv,64000,deny);process.max-msg-qbytes=(priv,65536,deny)After a reboot I checked the values by loging in under my user and running prctl.
    placer% prctl $$
    process: 419: -csh
    NAME    PRIVILEGE       VALUE    FLAG   ACTION                       RECIPIENT
    process.max-port-events
            privileged      65.5K       -   deny                                 -
            system          2.15G     max   deny                                 -
    process.max-msg-messages
            privileged      64.0K       -   deny                                 -
            system          4.29G     max   deny                                 -
    process.max-msg-qbytes
            privileged      64.0KB      -   deny                                 -
            system          4.00GB    max   deny                                 -
    process.max-sem-ops
            privileged        512       -   deny                                 -
            system          2.15G     max   deny                                 -
    ...Solaris 10 has different tunables and default values from 8 and 9. It's default tunables should be good for most applications per a given system's hardware. There are some great blog articles, and discussions on opensolaris.org and blogs.sun.com on tuning that explain the intent of tuning and why we shouldn't have to tune.
    Cheers,
    ~~sa

  • Unable to set kernel parameters using Reource Control in solaris 10

    HI,
    I'm trying to install DB2 8.2 on solaris 10.the problem i'm encountering in installation is unable to set MSGMAX and MSGMNB kernel parameters. I tried setting the new replacement parameter process.max-msq-qbytes through projects->Resource Control from the management console.but still uinable to set the parameters.
    Can anyone help me in setting the above kernel parameters.
    Its not possible to set it thru /etc/system.
    thanx

    HI,
    I'm trying to install DB2 8.2 on solaris 10.the problem i'm encountering in installation is unable to set MSGMAX and MSGMNB kernel parameters. I tried setting the new replacement parameter process.max-msq-qbytes through projects->Resource Control from the management console.but still uinable to set the parameters.
    Can anyone help me in setting the above kernel parameters.
    Its not possible to set it thru /etc/system.
    thanx

  • App remotely control presentation from iPhone

    Hi,
    I'm trying to build a simple app similar to the "Remote" app. Basically, it can connect via WiFi to a Mac and controls the presentation (MS Powerpoint 2008) on it, like going to the next or the previous slide. Also, there would be a "server" running on the Mac that can talk to the iPhone app, which acts as client. Can anyone give me some pointers on how the client and server may be built? Thanks in advance.

    Very informational. I'm trying to implement a simple version of iClickr, namely go to the next or previous slide only. Can you give me some further suggestion, or even sample code, on how this implementation can be achieved?

  • Unable to set up Google Apps email

    Hi
    I am trying to set up my Google Apps email account in Apple Mail. (ML 10.8.5)
    It is an exchange account.
    When enter account in Apple Mail, it creates the exchange account automatically.  However i think the incoming server is incorrect as it is not d/l emails from gmail.
    I have seen notes where they say to enable IMAP on the account.  But my gmail account is set up as exchange.  Will this interfere with my exchange/push fucntionality on my ios device if I enable IMAP?
    Do I have to enable IMAP at all?
    I am confused.
    Thanks and I look forward to your reply.

    set smtp and pop port no in settings
    *************Plese *********LIKE**** & ****ACCEPT as Solution*** If you got suggestion for your Query.
    @RAJESH SVM ----- Blackberry Mobile App Developer, Blaze, India.

  • Unable to set up Google Apps email on BB Torch 9850

    I've got a blackberry torch 9850 and I cannot get google apps from my school email to work on it.
    According to the school's helpdesk site, I should put my full ID [..]@uic.edu as my username.
    When I do it it doesn't set up gmail as my server, but my school's server.
    When I try to update it in advanced options, it doesn't allow me to change the username nor does it allow me to update the server to imap.gmail.com

    set smtp and pop port no in settings
    *************Plese *********LIKE**** & ****ACCEPT as Solution*** If you got suggestion for your Query.
    @RAJESH SVM ----- Blackberry Mobile App Developer, Blaze, India.

  • Unable to set thermostate schedule with home control

    Is anyone else having problems setting their thermostate schedule? I get an error message that the system was unavailable. I am getting really frustrated that I can't rely on this system. I have invested alot of money in everything, and it doesn't seem to be a very stable platform. Can anyone help me out?

    I had the same problem for 3 days in a row. Each day I re-programmed the thermostat at the start of the cold weather. The next day I would check and it was back to the original settings. On the 4th day the settings finally took.
    I called Verizon (as I have done about 50 times) and they had no solution other than to tell me they were doing some updates to the site and that might take care of it. My Energy Reader still doesn't give accurate readings about 1/2 the days. It seems to get signals mixed with the Appliance Switches I have. I've called Verizon on that as well and got the same reply so apparently it is their scripted answer. I also get the "server is currently busy, try again later" message frequently. Other than that things are working well.
    I have talked to the Manager and Developers and they are supposed to be getting back to me with solutions but it is going on 2 months and the problems still exist (except for the Thermostat which worked because of my persistence).
    This would be a nice system if they would resolve the bugs in it. I tried MiCasaVerde for a month and their system worked flawlessly but I couldn't use the cameras I bought from Verizon due to their coding them to prevent that. The manufacturer of the cameras said they should work unless the company changes the code in them which apparently Verizon does. Other than that I would have stayed with MiCasaVerde but decided to work with Verizon and hopefully get the thing working right. 
    They seem to spend more time on making the system proprietary than resolving customer issues. I've had the system for over 8 months now and have seen little improvement. My patience is running out. I won't even expound on new services that were supposed to be added and never have been.

  • Date and time on my iPhone 4 corrupted and unable to set after ios 6 update, please help

    Hi all,
    I have just updated ios6.1 on my iPhone 4. After updated, my date setting got corrupted to  2555 BE and I tried to manually set to 2013, it can work. Any one has this issue and able to help? Thanks..

    Settings>General>International>Calendar>Gregorian.
    You have "Buddhist" selected.

  • Unable to test iOS app on iPad with Flash Builder 4.7 OSX Yosemite

    After upgrading to OSX Yosemite, i'm unable to test my iOS app on my device.
    Compilation and packaging works as expected but app is never installed on my device connected trough USB.
    Anyone having the same problem?
    Thanks

    I've found the solution on another post (Re: Run/Debug on a device with Flash Builder 4.7 on OSX 10.9 (Mavericks) and iOS7) having app installation problem on Mavericks.
    Disable your device WiFi and install your application from Flash Builder. Then enable your device wifi. It work for me.
    Thanks

  • TS1559 iOS app to determine what ports a particular IP or app is using?

    Here's my problem...  I have an iOS app that controls my TV using IP.  I need to find out which ports it is using to do this so I can program a universal remote app.   Anyone know of a free to cheap iOS or OSX app that will capture and record ports being used for a particular target IP by a local app?  I'm using an Airport AP for my Wi-Fi network if that hellps.

    Problem solved.  I found an Android app (Network Connections) that logs the ports used by every running app.  I loaded an app called 'Remote 2' that controls my  TV, then used 'Network Connections' to log the ports that the remote app was using.  There probably is an equivalent to Network Connections in the iOS world, but I couldn't find one.

  • How do I localize Flash CS5.5 iOS app to one language

    What method or process do I use to set an iOS app to only one language?
    I recently had an iPad app written in Flash CS5.5 approved at the iTunes app store. I noticed at the iTunes store, it indicates that my app is localized in 14 different languages. I never set this up; it seems that there is a process that automatically adds several default language localizations to the ipa binary when the file is published. I tried the strings panel, used a var to set the localID, went into the SDK for flex and flash builder and deleted the locales (could not find anything similar for Flash itself), but none of this seems to prevent Flash from adding the language defaults. I have found many examples on how to localize my app for several languages, but nothing on how to set it to only one.
    Thanks much, Jon

    Well, I followed the iOS language list in iTunes thread   in this forum and was able to get rid of them all. I have to say that not any single reply in the thread was exactly right. It took a combination of Saumitra Bhave's and spinlight's replies and mass of trial and error to get it all to work. Even the App loader utility came up as obsolete! I have uploaded the updated binary to Apple and am awaiting their approval. The biggest issue is the placement of and actual coding in the entitlements plist; spinlight had the right idea, but, at least in my case, was coded out a bit different. Also, it was not exactly apparent that you had to use the teminal untility to recodesign the app after tearing it apart. Thank the heavens I have a least a basic understanding of how things work on the Mac and was able to puzzle it out. If Apple approves the app and all things look good, I will follow up here with what I did. Of course, if Adobe would kill this bug with a giant can of bug spray, this crazy work around wouldn't be needed...
    Thanks much,  Jon

  • Audigy Sound Blaster and Remotely controlled speake

    I own Sound Blaster Audigy card and I would like to purchase set of Dolby surround speakers that would work flawlessly with that card. I am thinking to buy Creative speakers since they also make this card, but I need a set that could be remotely controlled, either through wire or wirelessly. Anyone out there with this older model of Audigy that has surround speakers connected to it which can be remotely controlled? Any suggestions? I wrote an email with my question to Creative sales, but nobody responded yet.
    Thank you,

    If it is the very first Audigy model (Audigy ) then it a 5. soundcard. So any 5. speaker system or below would work nati'vely with your soundcard. If you choose a 6. or 7. system they usually have an upmix function to make 5. sounds play over all satellites.
    Also, most speaker sets (regardless of manufacturer) uses some kind of remote control (either through cable or IR).
    Your question is extremely hard to answer if you are looking for tips on which speaker set to buy, but easy to answer if we take the question "Anyone out there with this older model of Audigy that has surround speakers connected to it which can be remotely controlled?" at face value as everyone with any kind of speakers should have some kind of control pod or IR remote control to their speakers.
    Edit: I will try to answer your question: you can choose whatever speaker set you want as I think it is safe to say they all got either a cable remote control or an IR remote. The question then becomes what exactly you are looking for and in what price range.
    Message Edited by rico0 on 07-23-2005 08:43 PM

  • Use 2nd gen apple tv and remote control app on iphones and ipad.  We can control some functions on the apple tv but unable to purchase, access such controls as reset, restart, turn off home sharing, etc.  Home sharing stuck on old apple ID. Please help.

    Use 2nd gen apple tv and remote control app on iphones and ipad.  We can control some functions on the apple tv but unable to purchase, access such controls as reset, restart, turn off home sharing, etc.  Home sharing stuck on old apple ID. Please help.

    That is why I said to restore via iTunes, did you check the link?
    This will put it back to factory settings and you can set it up with the new ID once you reconnect with your HDTV. This is not done via ethernet, as per the link you need to connect to the computer via micro usb. You cannot bypass home sharing.
    FYI: An Apple ID cannot be deleted so the old one would still exist (even if you no longer use the email account it is associated with).

  • Is there a remote app to control my apple tv that I can put on an old iPod touch using iOS 3?

    Is there a remote app to control my apple tv that I can put on an old iPod touch using iOS 3? The only remote app I can find is only comparable with an OS of 7.  Help please!

    Sadly but no.

  • Remote control of Mac via Flash iOS app

    Hi all
    I am a very trial-and-error Flash coder but have managed to create a (I think) pretty serviceable VJ system - see http://www.smashedupsoiree.com/magic-wall/
    There are two Flash movies that run concurrently on the same Mac. One is the video content itself which is displayed by a projector; the other is the Controller movie which runs on the mac laptop screen. The two movies communicate by LocalConnection. I have had some success using VNC apps on an ipad which grabs the screen from the Mac and therefore enables this Controller movie to be effectively operated as a touch screen, portable interface. However there are latency issues with VNC - not what you need for a live performance tool!
    I am considering instead developing the controller as a packaged-for-ios app to reduce the latency issues. If I do so, does anyone know how it will be able to control the flash movie running on the mac on the same network? (In the vein of these kinds of apps: http://mashable.com/2010/02/28/iphone-remote-control-apps/ )? I have read that Local Connections do not work in Packaged-for-iOS apps. Would I instead use Apple APIs? How is this done via Flash Actionscript? I would want to either control the Mac-based movie like a LocalConnection or even simulating keypresses would be fine, that I can then detect with the Mac Flash movie.
    As I mentioned before, I'm no professional coder so the whole matter is a bit blurry to me! Any pointers would be much appreciated...
    Gerred

    teamviewer is a pretty big player also works across the Internet

Maybe you are looking for

  • Class filter, in need of

    I'm looking for a class filter. Do you know of one? Do you have any pointers for designing one? I'm thinking it would work like this: You've got a big set of classes. These classes implement various interfaces- some implement one, some implement seve

  • DVD Player 5.6

    My DVD Player keeps crashing whenever I try to play a dvd. Is there a way to fix this? I just bought this iMac!

  • Problems with the EME Admin Purge feature

    The purge function is supposed to permanently delete records that have been deleted through the EME UI. This is not working via a SQL Server DB. I have tried deleting basic records (such as tests, issues, requirements) as well as entire projects. I t

  • ActionScript 3 Core Library

    how to use ....  ActionScript 3 Core Library.  pls help...

  • 5.1 sound in After Effects?

    How do I import and export 5.1 sound in After Effects? I have version 5.5. The file will then be converted to a dcp file /Mattias