Unable to set user info

I am creating a duplicate account(concatenated with numerics to attributes) in AD and could not figure out what was going wrong?
<ResultItem type='message' status='error'>
<Message id='Unable to set user info: 'SetInfo(): 0X80072035: , 00002016: SvcErr: DSID-031A0FC0, problem 5003 (WILL_NOT_PERFORM), data 0
, The server is unwilling to process the request.
'>
</Message>
</ResultItem>
Any suggestions please?

Hi
Have you found a solution to this problem?
I am trying to create User accounts in my Windows AD, and I keep getting the error :
*"Unable to set user info. The name provided is not a properly formed account name"*

Similar Messages

Unable to set user environment in instlation

hi experts,
im trying to install ecc 6.o enp 4 ready on AIX db3 on ibm power PPC 64
i stuck after database installation, its said database client and server version mismatch, and installation is stopped
then i uninstalled db users groups but its asking manually to remove DB2/SID directory and /usr/sap/<SID> directory.
and if i try to run again sapinst its stucks on create users and give error unable to create user environment.
the error is
ERROR 2010-10-02 03:08:16.977 [sixxcstepexecute.cpp:950]
FCO-00011 The step setUserEnvironment with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0
|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0|setUserEnvi
ronment was executed with status ERROR .
does anyone faces similar problem earlier, how can i proceed?
thankx in advance
Edited by: nikhil jadhav on Oct 1, 2010 1:11 PM

Hi
Have you found a solution to this problem?
I am trying to create User accounts in my Windows AD, and I keep getting the error :
*"Unable to set user info. The name provided is not a properly formed account name"*

Warning! task_eval_init(): unable to set User/Group baseDN

Hi,
I have installed Directory server on Unix platform.
Installation went successful. While doing the installation, I have given the userid to run the server as "admxxx" and group as "www".
After the installation, the server started properly but with a warning message that "warning: daemon is running as super-user". And I was able to open the console and do whatever I wanted.
We have created 3 more directory server instances and we imported an LDIF file into one of the instances successfully.
Now the problem is, whenever we start the admin server, we are getting the following message.
bash-2.03# ./start-admin
Info: Cache expiration set to 600 seconds
Warning! task_eval_init(): unable to set User/Group baseDN
Netscape-Administrator/4.2 B2002.057.2313
startup: listening to http://servername, port 6061 as root
warning: daemon is running as super-user
Can any one tell why I am getting the message Warning! task_eval_init(): unable to set User/Group baseDN ?
This is very urgent. We have configured this LDAP to SiteMinder server.
Thanks in Advance,
Murthy

zhangping,
I don't recognize your error. But are you using ldap for logging into SunMC ? This is not possible.

Setting user info.

I recently bought this used Mac Pro with Snow Leopard installed on it.
The user was called Mac User and had no password.
I added a password, and filled out the address book card.
The little house in my finder window still says Mac even though I tried to change it to my name.
Also- when I fill out a form and start to type my first name " Michael", Mac pops in instead, and I need to type in my name manually.
Everything else pops in fine- email, address, etc.
Can I fix this so my name pops in on autofill, and am I stuck with the name MAC?

If you buy a used machine, the very first thing you should do is erase the hard drive and reinstall the system fresh. You don't know what condition the system is in, whether the previous owner might have allowed it to get infected with malware (yes, that is actually possible, see my [Mac Virus guide|http://www.reedcorner.net/thomas/guides/macvirus>) and whether he/she might even have installed spyware purposefully to steal information from you.
If the seller did not provide disks with the machine, you can contact Apple for replacements for a small fee, or you can buy a retail Mac OS X install disk (though then you'll be missing the apps that should be bundled with the machine).

Why do users get "unable to set template properties" message?

Hi there,
I am trying to administer a new site that was created with DW and has a .dwt (Templates/ locatedat the site root). I'm creating "Publisher" role connection keys so users can edit their subsections of the site. Users should be able to modify template properties when they edit/create new pages.
While testing the keys, the users report that they can connect and edit pages. However, when they try to modify template properties on either a new or existing page, they get this message "Unable to set template properties" and are prevented.
I've tried redefining the site and starting all over, tried CS3 vs. CS4 to see if it was a compatibility issue, looked at forum after forum but can't find any answers. I am experienced with DW but new to Contribute administration so I don't know what else to try. Hoping that someone will have encountered this before and can suggest a solution.
Thanks in advance!
ps- Let me know if there's other info I can provide to help troubleshoot.

I did find this April 9, 2009 post from majtom2grndctrl that suggests the issue is how contribute treats https:// sites. My site is set up as majtom2grndctrl described and I am having the same problem.
"I've got a problem with not being able to edit Template Properties on our test sites we host on HTTPS servers. I've narrowed down the problem to Contribute CS4 ignoring the website root configuration when it looks for the Templates folder. For example, say you have a site hosted at the following address:
https://www.yourdomain.com/yourfolder/
Contribute is configured to know your site is in /yourfolder/, but for whatever reason, when you open or create a page, and Contribute reads the InstanceBegin template="/Templates/file.dwt" tag at the beginning of HTML documents, it looks for a Templates folder at the HTTP server root, not in /yourfolder/. This prevents Contribute from loading the template while editing a document, and any attempt to edit Template Properties will yield the infamous "Unable to set template properties" dialog box."

BB Curve 8310 - Message -"Unable to look up the user info in database"

Have contacts with email address uploaded from older model. Receive emails ok...have also set up two addresses for myself, however when trying to either manually place the email address or select one from my contacts, I get the response
"Unable to look up the user info in database" when trying to send email
I have created a CSV file for my contacts to transfer to the Curve however I don't know where to go from there.

Unable to look up the user info in database - KB03414
SOLUTION HERE.
If your issue is resolved, put a checkmark in the green box that contains the resolution.
OR
If it was just/or also really helpful - Give it a Kudos.. Go on Mate.. Help the rest of the clueless blackberry user world find their answer too..
~Gday from Down Under~

Unable to Retrieve Contact Info from synch server - Gator wrote to try renaming file but I can't manage to find the pathway on my Win 7 computer for that file! got as far as my name under user but can't get to application data. Can someone help?

Hi, going crazy. Can't get this fixed. Unable to retrieve contact info from synch server. I did re-do synch using one time only replace I-phone info from "contacts" on computer and tried synching after that - no use same error!
I saw someone by name of Gator wrote pathways to follow in windows but got only as far as user (yes, selected my name as user as opposed to public) then clicked it open but lost after that - can't get to appdata for the next step.... any help or ideas would be soooooo appreciated. I'm so tired of this issue. thanks!
Pinina in Phoenix, Az

Hi, going crazy. Can't get this fixed. Unable to retrieve contact info from synch server. I did re-do synch using one time only replace I-phone info from "contacts" on computer and tried synching after that - no use same error!
I saw someone by name of Gator wrote pathways to follow in windows but got only as far as user (yes, selected my name as user as opposed to public) then clicked it open but lost after that - can't get to appdata for the next step.... any help or ideas would be soooooo appreciated. I'm so tired of this issue. thanks!
Pinina in Phoenix, Az

Microsoft Intune was unable to set the desired mobile device policy for one or more users due to the following error: A2CE0100

Hi!
We have fatal or critical error message on Microsoft Intune Portal but all agents are working just fine. Before opening support ticket we would like to hear comments from the experts on this forum. We would also like to fix this error before starting to
manage mobile devices with Intune.
Error message on Intune Portal:
"Microsoft Intune was unable to set the desired mobile device policy for one or more users due to the following error: A2CE0100"
Repeated: 19 times.
Class: (System) Policy
Random Fatal error message on C:\Program Files\Microsoft\OnlineManagement\Logs\PolicyAgent.log found from one Windows 8.1 client:
2015-02-21 08:49:20:704 2852 1ab0 FATAL: DocumentProvider::IndicateToConsumer/pp->ProcessPolicies(NULL, NULL, NULL, NULL) failed with error 0x800704d5.
That said, we are not facing any specific problem but we would like to find symptom of this repeating error message on Intune Portal . We would appreciate to get any thoughts about this case.
Br.
Jukka

Hi Jukka,
Mobile policy doesn't apply to clients using the Full Client download. Please open a support case so the team can assist in further troubleshooting.
Thanks,
Jon L. - MSFT - This posting is provided "AS IS" with no warranties and confers no rights.

Newly authorised users unable to view host info via console.

I've recently added a number of users to the /var/opt/SUNWsymon/cfg/esusers file on the SunMC server and
ensured that they have groups acess to esadm and esdomadm. Unfortunately, when they double click on a
server icon in the SunMC console, the window opens but remains blank. After 20 seconds or so, an error
messages appears in the lower left hand corner stating "Unable to load console info".
If I log on to the affected host and look in the /var/opt/SUNWsymon/cfg directory, I find two files containing
my login ID..
agent-usmaclgrps-d.dat
agent-usmusertbl-d.dat
No entries exist for the affected users. Yet if I run '/opt/SUNWsymon/sbin/es-setup -F', the two config files are updated with details of TWO of the affected users. The other user may not be present due to the fact they have
yet to log on via the console and try to retrieve the relevant info.
I have about 40 known servers that require attention, the chances are there are a significant number that have yet
to be diagnosed with the same issue. Any advice on a quick fix would be greatly appreciated. The thought
of having to run es-setup on each server is not something I would particularly relish...
Regards,
Trev.

What does the packet-tracer say, what does the IPsec associations say (packets encrypted/decrypted)?
This might be faster that going through your hundreds of lines of config.

I have a 1and1 email address but when I complete all the setting up info it says that either the imap user name or password is incorrect. I have attempted it many times since carefully putting in the correct info but still same message appears. Any ideas?

I have a 1and1 email address but when I complete all the setting up info it says that either the imap user name or password is incorrect. I have attempted it many times since carefully putting in the correct info but still same message appears. Any ideas?

If this is a Gmail account you might need to unlock by going here: https://accounts.google.com/DisplayUnlockCaptcha.

Kicking a user out of the portal if a User Info Setting is not populated?

That's what we want to do - we have a bit set in a User Info Setting by a custom profiling process. Users are redirected back to the Login screen of the portal when they successfully complete the process and the bit gets set to a certain value. This is kicked off in our OnAfterLogin (Login PEI). Well, if a user just goes up to the address bar in the browser and deletes up to "server.pt", they can get to the portal without this custom process being completed - they can circumvent it, because they technically have already logged in. The problem is that if they don'tcomplete that process, many portlets will not work because they are dependent on data gathered and set as a result of successful completion.
So, we need to somehow check globally if a certain User Info Setting is populated, and if it is not, log the user out. We know the URL/AS to redirect to, but I don't see a PEI in which a redirect is returned other than those in the Login PEI and Directory Actions PEI. I was hoping the IPageActions interface might help... So, I'm guessing a PEI is not the answer. What would be the best way to approach this?
Thanks,
SarahCox Enterprises

How about having your header or footer portlets check for you?
Or when you setup a user, only give them access to one portlet. The portlet would allow them to update their information, then give them access to the remaining features of the site.
just a couple of quick ideas.

How do you resolve the issue with an error message on the Mac mini server stating Unable to get users

How do you resolve an issue when creating groups on a Mac Mini Server when this error message appears.
"Unable to get Users & Groups State, The Open Directory master was created, but a problem was encountered trying to refresh the state of the server. Check log files for more info."

Most likely, the Server was not configured correctly - DNS is a common issue, If DNS is not configured properly, OD will not be happy. You can run
sudo changeip -checkhostname
in Terminal to see of DNS is up and running.
Here's a great tutorial (not mine) for setting up OS X Servers. The page says it's for a typical school environment, but it can be applied in many other environments.
http://www.wazmac.com/servers_network/fileservers/osxserver_setup/index.htm
hth
Jeff

Unable to set configured property "/Initial.initialServices"

Hi All,
I am getting following error-
05:21:52,006 INFO [STDOUT] Unable to set configured property "/Initial.initialServices" atg.nucleus.ConfigurationException: Unable to resolve component /com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet
05:21:52,013 INFO [STDOUT] **** Error
05:21:52,064 INFO [STDOUT] Unable to set configured property "/Initial.initialServices" atg.nucleus.ConfigurationException: Unable to resolve component /com/progiweb/fbconnect/pipeline/FacebookProfileRequestServlet
I have checked the config path of both components and the structure of servlet is as below-
src/com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet.java and src/com/progiweb/fbconnect/pipeline/FacebookProfileRequestServlet.java.java
And for the properties files I have created them under the path- config/atg/dynamo/servlet/dafpipeline and config/atg/dynamo/servlet/pipeline
Inside these I am keeping the FacebookAuthStatusServlet.properties and FacebookProfileRequestServlet.properties files
The path of Initial.properties is as below- config/atg/dynamo/servlet/Initial.properties
The content of Initial.properties is -
initialServices+=\
/atg/dynamo/servlet/dafpipeline/FacebookAuthStatusServlet,\
/atg/dynamo/servlet/dafpipeline/FacebookProfileRequestServlet
Should I need to keep the both pipeline- dafpipeline and pipeline or only one of them?
And my pipeline structure is correct or not?
How to resolve the above error?
Please help regarding this!
Regards,
Prateek

The content of config/atg/dynamo/servlet/dafpipeline/FacebookAuthStatusServlet.properties is as below-
$class=com.progiweb.fbconnect.pipeline.FacebookAuthStatusServlet
$scope=global
serviceInfo=This servlet handle facebook redirection if it's a new user.
insertAfterServlet=/atg/dynamo/servlet/dafpipeline/FacebookProfileRequestServlet
redirect=true
redirectURI=register.jsp
profileUpdater=/fbconnect/userprofiling/FacebookProfileUpdater
loggingDebug=false
And the content of config/atg/dynamo/servlet/pipeline/FacebookAuthStatusServlet.properties is as below-
$class=com.progiweb.fbconnect.pipeline.FacebookAuthStatusServlet
$scope=global
serviceInfo=This servlet handle facebook redirection if it's a new user.
insertAfterServlet=/atg/dynamo/servlet/pipeline/FacebookProfileRequestServlet
redirect=true
redirectURI=register.jsp
profileUpdater=/fbconnect/userprofiling/FacebookProfileUpdater
bypassExtensions=.css,.gif,.jpg,.swf
loggingDebug=false
I think this will clear the confusion.
Regards,
Prateek

Unable to edit user information from User Admin applet

Hi
I'm unable to update user information from user admin applet. After selecting a particular user, i'm updating his full name and trying to save the details. When i click on save i'm getting below error
"Unable to execute service EDIT_USER and function addUserAttributes",(System Error: Unable to execute query 'uUsersClassifiedMarkings(UPDATE Users SET uClassifiedMarkings='No Markings'WHERE(uClassifiedMarkings is null OR uClassifiedMarkings="))'.ORA-00904:"UCLASSIFIEDMARKINGS":invalid Identifier java.sql.SQLSyntaxException: ORA-00904:"UCLASSIFIEDMARKINGS": invalid identifier)
Kindly let know what is issue or how to resolve this error

Ok,lets give it a shot. Can you please check if you have any Security Classifications added by navigating to Records->Configure->Security->Security Classification
If you do not see any entries here, then use the Add button to add the following
- No Markings
- Secret
- Top Secret
- Confidential
Now try to update the user info using the admin applet. In the edit window assign Security Classification to "No Markings" and try submitting the update. Let us know what is the outcome.
I completely agree with William on his analysis. Please try these steps if you are working on a Dev/POC instance.
Regards,
- Anand

[SOLVED] sudo: unable to set runas group vector: Invalid argument

I recently made the (idiotic) mistake of overwriting my /etc/passwd and /etc/group files, although I managed to restore them from a backup. Since restarting the machine I'm having the same issue every time I invoke sudo:
sudo: unable to set runas group vector: Invalid argument
I can't find any info on this error. Any ideas on where to start?
Thanks,
-- C. M.
EDIT: I should also note that this is a headless machine that I'm accessing via SSH.
Last edited by C. M. Harlequin (2014-06-15 10:35:33)

Thanks for the reply, Amish.
It's my understanding that the 'group vector' is a term that refers to the specific set of groups to which a user has membership, rather than a specific group named 'vector'. Although, I could be mistaken.
From the sudo manpage:
The -P (preserve group vector) option causes sudo to preserve the user's group vector unaltered. By default, sudo will initialize the group vector to the list of groups the target user is in. The real and effective group IDs, however, are still set to match the target user.
Similarly, from the sudoers manpage:
By default, sudo will initialize the group vector to the list of groups the target user is in. When preserve_groups is set, the user's existing group vector is left unaltered. The real and effective group IDs, however, are still set to match the target user. This flag is off by default.
But the manpages don't offer me much, I'm still clueless as to why I'm getting the error.
EDIT: although using the -P flag seems to allow sudo to run without error
Last edited by C. M. Harlequin (2014-06-14 18:42:39)

Unable to set user info

Similar Messages

Maybe you are looking for