Unable to setup Basic or Digest Authentication on Infrastructure

Hello Folks,
On my infrastructure Apache instance I tried setting up Basic and Digest authentication but neither worked. For the Basic authentication I got a segmentation fault and for the Digest authentication I got the following error message:
[OSSO] E12: Unspecified or unexpected AuthType
I have OID and SSO set up in my infrastructure.
Any help would be greatly appreciated.
Thanks!

It seems that after I made the change DAS doesn't work anymore. I tried moving the line to load the OC4J Module before the OSSO but then the infrastructure web server just wouldn't start. Any help provided would be greatly appreciated. Please let me know if you require any additional information.
Thanks!

Similar Messages

How to configure a Proxy in OSB with Digest Authentication?

Hello, Guys.
I need a help with this subject.
I have a demand to configure a Proxy in OSB 11.1.1.6 with Digest Authentication. I'm using a Embedded Ldap with Identity Asserter.
I'have configured a DefaultAuthenticator and the DefaultIdentityAsserter to support Digest Password and create a new LdapIdentityAsserter pointing to my embedded Ldap.
When I'll create a new Proxy, in the security options, i can see the digest options to authenticate my username and password. I selected the one of all the options, but in the time of the Proxy test the authentication didn't work.
Could anyone help me?
Thanks you.

Unfortunately, a reference trigger can't be used for continuous acquisition after the trigger. The maximum post-trigger count is either 2^24 or 2^32 depending on your hardware. Depending on your sampling rate and how many samples you expect to acquire before issuing a software stop, using the max post-trigger count may be sufficient for you. There are a couple of other options I can think of that you might want to try:
1.) If possible, play with the trigger condition such that it occurs at the start of your pre-trigger data and use it as a start trigger instead. I suspect this may not be possible.
2.) Set up a continuous acquisition and implement detection of the trigger condition through software. This is more software work and is more CPU intensive than the hardware solution, but it can definitely be made to work.
3.) With some creative use of the counters, you may be able to latch the sample clock number that trigger occurred on. This would allow you to setup a continuous acquisition and use the hardware to tell you where the trigger occurred instead of figuring it out in software. What I'm thinking is you would set up a buffered event counting task with the ai/SampleClock as the timebase source of the counter and the trigger signal as the sample clock of the counter. By reading the first count value, you should know which AI sample the trigger occurred. From there, you can seek to the right position in the buffer and begin reading data indefinitely.
Good luck!

Digest Authentication against IIS

Hi All,
I have created a .net web service and deployed it on IIS.
I am calling it from java. In java I have written following code snippet to pass the creadentials:
Stub stub = createProxy();
            stub._setProperty(javax.xml.rpc.Stub.ENDPOINT_ADDRESS_PROPERTY,"http://servername/_vti_bin/CreateUser.asmx");
            stub._setProperty(javax.xml.rpc.Stub.USERNAME_PROPERTY, "domain\\username");
            stub._setProperty(javax.xml.rpc.Stub.PASSWORD_PROPERTY, "password");It's workng fine when I enable "Basic Authentication" and "Integrated Windows Authentication" on IIS but it gives me unuthorization error when I enable only " Integrated Authentication" or combination of "Integrated Windows Authentication" and "Digest Authentication".
Do I need to write some another code for "Digest Authentication"?
Thanks
Gaurav

No. We only use Digest. I am able to login but must continue providing credentials on any link past the secured folder.

ICal digest authentication broken after system crash

Our XServe crashed a few days ago. It rebooted fine and all services works like before the crash. Only iCal authentication is giving me a headache. Digest authentication isn't working. Kerberos works and Basic, but I need Digest to work too. For web-authentication, everything works too, and we know the password is correct.
caldavd > access.log gives this:
127.0.0.1 - username [09/Jan/2013:14:38:15 +0200] "PROPFIND /principals/ HTTP/1.1" 207 504 "-" "Mac OS X/10.8.2 (12C60) CalendarAgent/55" i=8009 t=8.0 or=2
ApplePasswordServer.Server.log gives this:
Jan 9 2013 14:38:15 AUTH2: {0x4785feb3473967ce0000007a00000416, username} WEBDAV-DIGEST authentication failed, SASL error -13 (password incorrect).
ApplePasswordServer.Error.log gives this:
Jan 9 2013 14:38:15 client response doesn't match what we generated
Any ideas on what to look for? Caches or corrupt files to check?
Thanks!

Finally found the error. Somehow a setting for Digest authentication had changed to
Calendar:Authentication:Digest:Qop = "auth"
after changing it back to
Calendar:Authentication:Digest:Qop = ""
everything works well again!

DIGEST Authentication and using Cookies

Hi,
I am writing applicationw which can connect to http urls and can communicate with them furthur. I am able to get it when there is BASIC LEVEL OF Authentication but not with DIGEST and Cookies.. i read somewhere that java.net package does not support DIGEST. I am very new to this ares and need ur expert help in this..Also please tell me how can i use cookies in my application..
Any source code will be a great help..
Thanks,
Akhil

just to keep the query on first page..any body any idea or help...
Akhil

Logical Port for Digest Authentication

Hello,
I want to connect to a webservice which is running at an IIS with Digest Authentication. I created a Consumer Proxy and added a Logical Port in SAO Management (Java-Stack) to this Consumer Proxy, but I can't find a digest authetification in Configuration of the Logical Port. Is it possible to connect from a SAP System to a webservice with Digest Authentification?
Thanks and best regards
Iris

Hello Gourav,
Thank you for your answer.
I tried to create a Logical Port with HTTP Access to the WSDL, but the WSDl needs digest authetication as well. So I get the error
Error: Error in WSDL access: Exception occurred in communication framework:Error in HTTP Framework:401Unauthorizedhttps://itnts2371/SecurityWebService.asmx?WSDL
though I logged in with right credentials.
Then I tried to read the WSDl from a file then, but I get the error
Error: Error in WSDL parsing: Exception occurred in library handler
So I created a manual Logical Port for SSL-Access. I get only "User ID/Password" and "SAP Authenticatoin Assertion Ticket", but no "Digest Authentication". "User ID/Password" doesn't work, I get a dialog to put in User ID and password, but I'm never authorized.
Any other suggestions?
Thanks
With best regards
Iris

HT5552 I am unable to setup payment method using American Express.

I am unable to setup payment method using American Express.

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

OSB: HTTP digest authentication for WebServices

Hi,
How do I configure HTTP digest authentication for WebServices offered by the OSB (Proxy Services with WS as transport)?
Best regards
Dimo

Did you figure out how to do it.?

I have a sync account and used to keep sync with firefox server. Now computer got re-installed and want to sync data from firefox sync server. But I am unable to setup as i dont have sync key.

I have a sync account and used to keep sync with Firefox server. Now computer got re-installed(OS) and want to sync data from Firefox sync server. But I am unable to setup as i don't have sync key.
I would like to just sync with Firefox Sync Server with existing account. I can not find any way out for this. please reply me on
[email protected]

hello, for the old sync system in firefox 28 and below you also had to sign up with a mail address and password originally - to connect firefox to the old account you would need to have all those three pieces (mail, password & recovery key) available to you unfortunately...

I am unable to setup facetime and imessages on my mobile no.

Hi! I have iphone5 16Gb. I am unable to setup facetime and imessages on my mobile no. every time I sign in using my apple id,it only uses the email id for send & receive. I have created new apple Id too but still facing the same problem. I have tried it many times but now its has been a month. I am helpless. Please provide me the solution.

Hi pbatta,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
iOS: Troubleshooting Messages
http://support.apple.com/kb/TS2755
Cheers,
- Judy

HTTP Digest Authentication in Weblogic Server ?

I understand that Weblogic Server 10.3.0.0 does not have declarative support for HTTP Digest Authentication. In that case, what are the alternatives to do HTTP Digest Authentication on the server ?
Edited by: user566628 on Sep 19, 2008 1:47 PM

I would open a support case to get clarification on whether DIGEST is supported. According to the WLS 8.1 book I found on google, it looks like it may have been supported in 8.1:
http://books.google.com/books?id=TiAKHpPHpHIC&pg=PA836&lpg=PA836&dq=WebLogic+Digest+Authentication&source=web&ots=ciJMQOXm2q&sig=oJGOs-J5snfFGt_hWSPi-FXyERQ&hl=en&sa=X&oi=book_result&resnum=10&ct=result
If that is the case, it is unlikely that they removed it, it just may not be documented well as it is very uncommon.

Digest authentication in WL7.0

Hi,
Does anybody know if Weblogic Server 7.0 supports HTTP
digest authentication method ?
I created my own authenticator, but I want Weblogic to check
the authentication method (but not the username/password). When
I try to set a security constraint in my application's web.xml,
the server says:
weblogic.xml.dom.DOMProcessingException: DIGEST authentication method is not supported.
Regards, Geza

"Geza Szocs" <[email protected]> wrote in message
news:[email protected]..
>
Hi,
Does anybody know if Weblogic Server 7.0 supports HTTP
digest authentication method ?
Digest authentication is not supported in 7.0

8.1.7 install error: Unable to Setup Inventory

I have problem with the installation of 8i 8.1.7.
After the first Welcome , and the second Source and Destine, the next windows don't appear. The message "Unable to Setup Inventory, You may no have proper permissions" display.
Oracle 8.1.7, for AIX 4.3.3

I've run into this when I had 2 Oracle homes (each with a different user -- oracle & ias, but the same group -- oinstall). It was a permission problem.
I'd check 2 things. First, that the ownership is correct. If not, fix by something along the lines of chown -R oracle.oinstall $ORACLE_HOME/oraInventory. Second, make sure the permissions are right on the directory. For the oraInventory directory, I usually do chmod -R 775 oraInventory (you could get away with a 755 as long as you only have one owner for the system, which sounds like the case -- I use the 775 because of the two owner issue I mentioned before). That should do it.

DIGEST authentication support

I have noticed that neither SunONE nor weblogic support DIGEST authentication. Tomcat appears to have spotty support as well.
Digests should be supported by all browsers that use HTTP 1.1, but yet the servlet spec makes it an optional item for web container implementors. I would love to have a good way to hide passwords entered from the browser without going whole hog (SSL).
Does anyone know why DIGEST isn't better supported by containers?

I'm not sure but I don't believe so.
Paul
On Fri, 29 Jun 2001 13:26:58 -0400, "Alex" <[email protected]> wrote:
Does WLS 5.1 support DIGEST authentication?
Alex
[email protected]

Digest Authentication

Hi there!
Is there any chance to achieve digest authentication to AMServer? Suppose I have only username and digest (MD5 or SHA-1) and I want to log in and obtain SSOToken.
For instace client enters username and password on some JSP page, then the password will be digested and send through the wire to AMServer.
I dont want to use HTTPS or Certificate authentication (the digest is quite enough).
Please help.
Thanks.

Yes, you have to do this implementation yourself in the WLSS 2.1 release. Example application code will be provided as part of a future WLSS release, however.

Unable to setup Basic or Digest Authentication on Infrastructure

Similar Messages

Maybe you are looking for