Unable to share with Itunes over network

Greetings...
I have previously been able to share music between all my computers (four PC's and one Mac) but I recently noticed that other computers' Itunes libraries are no longer showing up. No settings were changed within Itunes (set to share all with no password). I'm not sure what has changed between then and now, besides possibly a newer version of Itunes in use. The same version is currently in use on all my computers (7.5.0.20).
Firewall software is disabled on all computers. The network is a simple class C non-routable, with Linksys router and cable modem on the other side.
Any suggestions on where to look would be greatly appreciated. Thanks for taking the time.

Bump to the top... any ideas anyone? Thanks!

Similar Messages

Mountain Lion problem with iTunes over network

I connect to my iTunes to watch movies over my Airport network. A movie will play for about 20 min then loose connection. I have to go to my host iMac with Mountain Lion and restart iTunes then reconnect on my mac mini downstairs which is running Leopard. A real pain in the bu##.
It appears to be shutting down my network connection for some reason. Is anyone else having this problem? Does anyone know what to do?
I will watch a movie using my appleTV and see if it does the same thing. Then I will know if it is realted to my iMac and not compatability with Leopard.

ok, I watched a movie on my AppleTV without interuption so it must be a conflict between my Leopard on the mac mini and Mountain Lion on my iMac.

Unable to sync my iphone with itunes over wi-fi

This might be me be being extremely dumb, but I am unable to sync my iphone with itunes over wi-fi. I have itunes 10.5 on windows, have iOS 5. When I plug my phone into my computer I have ticked the box on the device summary screen enabling wi-fi sync but when I go into my iPhone menu, the "sync now" box is greyed out and it just says that it will resume sync when my computer is available.
Any suggestions>??

Sign me up for a "me too"
updated 1 iPad,1 iPod and 2 iPhone4s and sync works on all but my iPhone4
Each iP* device has it's own Windows 7 system to sync with
When I unplug the iPad, iPod or other iPhone, the device stays in the devices list in iTunes
When I unplug my iPhone, it disappears from the devices list (which makes me think it's iTunes being petulant)
Have tried rebooting bot windows and the iPhone, disabling the firewall and 'repairing' iTunes
It's a 64 bit windows 7, FWIW, but the other iPhone 4 talks nice to a 64 bit windows 7

Share Aperture photos over network

Hallo every body,
iam searching for a solution, how to share photo over network for a long time, in our company we have 40 macs(imac, mac bookpro) and 3 xserve, vtrak and 30pc. and we have round about 30000 pic they are saved in iphoto library on one of the xserve.
My Boss wants from me to find a solution to share these photos over network. the mac users must use iphoto to access these photos.
which program shall i install on the server so that the client users can access the photos from there macs through iphoto.
at the beginning i used the share library option in iphoto, until iphoto 9.1.1. By iphoto 9.1.1 on the client when i click on the shared library my searching field disappears and i cant search in the shared photos.
I thought Aperture is the solution, so i shared the aperture library over the network (with afp protocoll) but in order to access the network aperture library, first i need to install aperture on the client and then i open iphoto and from iphoto option i can choose the option access aperture library.
how can i solve it without to install aperture on the client, is there any iphoto plugin so that i can access aperture library without installing aperture
or is there somebody uses another solution???
please help
best regards
Tony

Neither iPhoto nor Aperture is the solution for this.
The idea of using iphoto on the client machines is wrong, it's just not designed for that use. Iphoto is designed for a family with a point and shoot camera, or even a phone. Aperture is a pro level photomanager. Installing Aperture on all the mchines means you will have to purchase the app for all the machine, you need a site licence.
Also, it won't work anyway. You can't share an Aperture Library like an iPhoto one an only one user can access the Library at a time. So, one of the users acesses the Library and all the others are locked out.
Neither are what you need: you need a media server application. A pro level media server. Tell your boss he's fooling himself if he thinks anything else will work reliably.
Regards
TD

There's a logo that pops up on my ipod touch screen with the logo Itunes and the USB cord but is unable to connecct with iTunes...what should i do?

There's a logo that pops up on my ipod touch screen with the logo Itunes and the USB cord but is unable to connecct with iTunes...what should i do?

Resolve communication issues
Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers.
Common errors: 1004, 1013, 1638, 3014, 3194, or 3000-3999. These alerts refer to gs.apple.com, say "There was a problem downloading the software", or say the "device isn't eligible for the requested build".

Spartan 3E with Labview 2012 (32 bit) on WIndows 7 64-bit - Error Code: -310602 NI-COBS: Unable to communicate with device over communication cable.

Thanks for the info, Kyle. I will probably try to find an older 32-bit XP machine. VM is just not an option for me right now.

Hello everybody,
I am trying to use the DIgilent Spartan 3E board with Labvew 2012 SP1 32 bit. I am able to compile the example code for LED shift. I am however unable to transfer code to the FPGA. I get the following error message:
Error Code: -310602
NI-COBS: Unable to communicate with device over communication cable.
Please verify that the cable is connected to a supported device and that the appropriate drivers are installed.
My system configuration is as follows:
Windows 7 (64 bit) on Dell XPS laptop.
Labview 2012 SP1 (32 bit)
Labview FPGA 2012 SP1
Labview 2012 FPGA support for Spartan3E
Xilinx 13.4 tools
DEFB LV FPGA 2012sp1 support installer
Xilinx USB cable driver v1.3 installed.
I took all the precautions mentioned by others on this forum and others, mainly that the cable must be disconnected before installing the Xilinx cable driver. All software and drivers were installed correctly. I even uninstalled and reinstalled the entire Labview software set I had. I still get the same error.
A few other questions:
1. Is the Xilinx cable different from a regular USB cable of the same configuration ?
2. When I program the FPGA I only have the USB cable connected between my computer and the Spartan 3e board. Should any other cable be connected ?
3. What should be the correct jumper settings for J1 - JP30 (especially J30, J11, JP9, JP6, JP7, etc) ?
I have been at this or over 3 days trying to figure it out. Any help will be greatly appreciated.

Why doesn't my imovie project for ipod touch go to my computer's iTunes when i hit the option "share with iTunes"? I need iTunes to have the project so I can format it in a video converter. Can anyone help?

I downloaded Imovie to my Ipod touch (I don't have a Mac computer/laptop) so that I can edit a project for school video assignment. I have editted the video, but I can't figure out how to make it go to Itunes. I need it there so that I can put it into a video converter for projection to my class. The problem is, I don't know how to get Itunes to recognize that there is a project made. Imovie (at least the mobile version) has a "share with Itunes" feature, which I found. When I use this feature... nothing happens on the itunes end. Does anyone know why this is and have a solution?

This is what the iMovie Help says:
http://help.apple.com/imovie/iphone/1.3/index.html#kna4501e0f8
Is that the procedure you've been following?
Regards.

I purchased a new computer with windows 8 and unable to sync with itunes

I am unable to sync with itunes, since getting Windows 8

Check this article about syncing to a new computer:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive
If you just updated Windows, did you make sure to have the latest updates for your computer?
Did you try to reinstall iTunes and all related Apple software?
Also check this article again:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues

HT4623 just purchased iphone 5 and unable to sync with itunes or icloud- help...

Just purchased iphone 5 and unable to sync with itunes or icloud. when I connect to itunes it says i need itunes 10.7 or later. I've updated itunes and still getting same message. suggestions appreciated

What is your Computer and which operating system is it running...
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.7 or later (free download from www.itunes.com/download)
From Here > http://www.apple.com/iphone/specs.html

IMovie crashes when I try to share with iTunes.

iMovie crashes when I try to share with iTunes. I want to view it on Apple TV.

Hi MFells,
If you are having issues with an app that keeps crashing or unexpectedly closing, you may find the following article helpful:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/ts1702
Regards,
- Brenden

Quicktime movie wont share with iTunes

When I try to share my movie with iTunes it appears in music as a .m4v but not in movies. Audio plays fine but there is no video.
I have tried creating the .m4v via the menu and short cut icon from QT. I have tried using import to library and drag and drop to get the file into iTunes.
The movie is a home recording. Edited in FCE and then exported as a QT movie.
I am running OSX 10.7.5, QT Player 10.1 and iTunes 11.0.4
Any ideas?

I should have said that previously I have been able to import home movies into iTunes.
You used to be able to import AVI wrapped movies into iTunes also—but not any more. Basically, iTunes has become more and more a "funnel" for mobile files compressed specificly for mobile device (iPad, iPhone and iPod Touch) and TV playback. You used to able import almost any non-muxed format to iTunes that was compatible with your system's QT codec component configuration and it would play in the QT 7 based version of iTunes. Unfortunately, as part of the transition from QT 7 to QT X technologies, iTunes itself has been modified to limit what it will accept. For instance, I just ran a fiew quick tests and found that DV/DV (DV), DVCPRO/PCM (MOV), MJPEG/AAC (MJPG or MOV), and PNG/AAC (MOV) files no longer import to the latest version of iTunes under Mountain Lion. So, to say the least, Apple is continuing to refine what iTunes can and cannot import in terms of compression formats and file types. That is probably why they added and expected users to employ the "Share with iTunes" export option—i.e., to not only send files to iTunes indirectly but to also ensure that the file received is in the default H.264/AAC (M4V) compressed data format and file type that iTunes expects to play, sync, and/or stream to other devices and/or computers.
How would I do this?
As always, that depends on your specific fork flow and needs. If you are saving your edited FCE content to a QT (MOV) file in its current (but as yet unstated) compression format because you need it for some other application in that compression format, then simply open the file in an app like the QT 7 or QT X player and share/export the content to iTunes or a specific iTunes device-compatible (iPhone, iPod, TV, Podcast, iTunes, etc.) preset and import the new file to iTunes manually or import automatically. If the sole use of the file is iTunes, then you can export an iTunes compatible file directly from FCE.

HT5622 Unable to connect with itune app store at ios7.0.4

Unable to connect with itune app even reset the password of appleid.
Kindly help me

Hello Piyushvinayak
Continue your troubleshooting with the article below to ensure that you have proper connection to the iTunes Store.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Regards,
-Norm G.

Just replace my HD, restored from backup but now my iPhone won't sync with iTunes over wifi

Just replace my HD, restored from backup but now my iPhone won't sync with iTunes over wifi

Is synching over wi-fi viable? I've never done it, but when I tried something similar back in the old Palm PDA days, it was S-L-O-W, slow as molasses. I realize that the i-device are far more modern with faster processors, but wondering whether it's even worth exploring doing this.

Does iTunes share music only over Network or via Airport across any network

Hello my name is Bill and I am running an unsecure network. There, I got it out and I feel terrible about it. Please read on to see if you can help me.
The other day I was on my iTunes and noticed another user's music folder pop up along the side bar. It said Leyla's Music. I don't know any Leyla. This leads to the question in the Subject line.
Maybe my question is vague so I'll try to clarify. I've just moved to Istanbul and bought a Turkish modem. It will only run its installation CD on a PC. I have an old Windows 98 laptop that I was able to set up the network. However, I am unable to change security settings because my old Windows 98 doesn't have the right font set to read the CD program.
Normally, I have my music on a LaCie connected via USB to my iMac. I then share the music so that I can pull it up anywhere in the house on my Powerbook. How does it physically share the music. In other words, does the user have to be on my network or does airport just broadcast a signal to any iTunes in the area, be that on the same network or a different one?
Differently put, is Leyla poaching on my network or is she just picking up my iTunes signal? I have already added a password to my music but want to know if I need to get a new computer or something else to get this network secured to my MAC addresses only. (oh yeah, I tried to update the WIN98 font set but couldn't find it on microsoft.com)
Thanks for looking,
Bill
20" Intel iMac Mac OS X (10.4)

I'm having the same issue, but I have recently changed a lot of things. With so many variables I don't know where to start, but maybe we can figure out a common one...
I have 2 individual libraries, one on my Laptop, another (extended library) on an external drive, I changed my DNS to open DNS, I have recently added an Apple TV, added 2 Airport Express and setup 'Simplify Media' to share my library over the internet. Has anyone with the same issue have any of this in common?
I can no longer connect to my iTunes Library via the iPhone Apple Remote, shared through Apple TV or as a shared Library in iTunes.

Will iTunes 10.6.1 on a 2005 iMac be able to home-share with iTunes 7 on a 2008 iMac and a new iPhone 5?

On the iPhone page I was told the iPhone 5 will work with iTunes 10.7, so maybe I shouldn't upgrade to iTunes 11 since a lot of people don't like it. Nobody here seems to know how to combine my two iTunes libraries on the same account but different-aged iMacs.
So the question is, if I upgrade my 2008 Intel iMac to Snow Leopard and Mountain Lion and iTunes 10.7, will it and my new iPhone 5 be able to access the 80GB library on the 10.6.1 version of iTunes on the older white 2005 iMac?
I appreciate any help anyone can give me. I currently have home sharing via a WiFi network, to rephrase in case my previous unanswered questions haven't been clear, I'm wondering if I will be able to home-share between 10.6.1 and 10.7, and if an iPhone 5 would be able to access a home-shared library on the older 10.6.1 version?

Thanks for the link, Niel. I'm kind of disappointed with Apple that they're making us buy an upgrade to her OS to get all of her Apple products to work together. It seems weird that we could have any old Windows machine and this would work great, but the fact that she has a MacBook is screwing this up.

Unable to share with Itunes over network

Similar Messages

Maybe you are looking for