Unable to ship confirm, showing stops cannot be set to status closed

hi all,
while i am performing shipconfirm,
it showing "Error:some deliveries selected for ship confirm have errors or warnings"
and details showing "stops cannot be set to status closed"
appreciate u r best suggestions.
thanks
govardhan

Dear ,
Maybe you need to check all delivery line status ..
All line status should be "Staged.." .
If there is any status not staged, System will show the error.
Hope it's useful to you.

Similar Messages

Unable to ship confirm the delivery showing the following error :

Warning: Delivery 2840817 has null Weight
Error: The document category has no valid sequence assigned.
Warning: Pack Slip information could not be automatically created for delivery 2840817.
Unexpected Error: Error in Routine WSH_NEW_DELIVERY_ACTIONS.setInTransit, Oracle Error - -20001
ORA-20001: APP-JA-460706: Exception Occured in Object = ja_in_wsh_dlry_au_rel_stat_trg.
ORA-20406: Mandatory India Localization Sub-inventory Setup not done for this Location from where shipment is made
ORA-06512: at "APPS.APP_EXCEPTION", line 72
ORA-06512: at "APPS.JA_IN_WSH_DLRY_AU_REL_STAT_TRG", line 1337
ORA-04088: error during execution of trigger 'APPS.JA_IN_WSH_DLRY_AU_REL_STAT_TRG'
Error: Stop Tata Motors -New Delhi:332 cannot be set to status CLOSED.
Error: Stop Tata Motors -New Delhi:332 on trip 2809818 is not closed and is prior to the stop 75741:new delhi on trip 2809818. Please close the previous stop or re-sequence the stops, if necessary.
Error: Stop 75741:new delhi cannot be set to status CLOSED.
Error: 0 stops were successfully closed.
0 stops were closed with warnings.
2 stops had errors and could not be closed.
0 stops had warnings and could not be closed.
I have assigned the document sequence also.
but not able to find organisation and location in the LOV while setting up the subinventory locations in oracle inventory.

Hi Sachin,
seems you are missing India Localization setups.
check this note from MOS
ORA-20406: Mandatory India Localization Sub-inventory Setup not done for this Location from where shipment is made (Doc ID 382845.1)
India Local Inventory -> Setup -> Organization -> SubInventory Locations
The Subinventory can be either ‘Bonded’ or ‘Non-Bonded’ in Manufacturing Organization. ‘Non-
Bonded’ subinventory is where the Bonded flag is unchecked and does not result in Excise Register
updates for any shipments made.
For Trading Organization the Trading flag would be autochecked and the same is not updatable for
unchecking.

Project Contracts Deliverables : Unable to Ship Confirm

Sub : Project Contracts Deliverables : Unable to Ship Confirm
Hi,
When trying to " Ship Confirm " for deliveries initiated from Project Contracts, Error Msg appears :
Error : Some deliveries selected for ship confirm have errors or warnings.
On clicking DETAIL buttton :
Error:Delivery Details xxxyy in this delivery do not satisfy inventory controls.
Warning:The Ship Confirm Option selected will unassign all the lines from delivery yyyxx.
Regards
adi

Hi,
Please check the metalink note: 227843.1 for this issue.
Hope this helps!
Thanks,
Sathish Raju
www.projectsaccounting.com

Error occurred when I execute the ship confirm

Submitted 1 out of 1 documents for this document set. (REQ_IDS=5813936)
Unexpected Error: Error in Routine WSH_NEW_DELIVERY_ACTIONS.setInTransit, Oracle Error - -29280
ORA-29280: invalid directory path
ORA-06512: at "SYS.UTL_FILE", line 41
ORA-06512: at "SYS.UTL_FILE", line 478
ORA-06512: at "APPS.ADS_UTIL_PKG", line 22
ORA-06512: at "APPS.ADS_WSH_DELIVERY_DET_TRG1", line 67
ORA-01403: no data found
ORA-04088: error during execution of trigger 'APPS.ADS_WSH_DELIVERY_DET_TRG1'
Interface Trip Stop request 5813937 has been submitted
Error: Stop SHE:Bangko cannot be set to status CLOSED.
Error: Stop SHE:Bangko on trip 3128352 is not closed and is prior to the stop 24685:Moon Street, Moon Town on trip 3128352. Please close the previous stop or re-sequence the stops, if necessary.
Error: Stop 24685:Moon Street, Moon Town cannot be set to status CLOSED.
Error: 0 stops were successfully closed.
0 stops were closed with warnings.
2 stops had errors and could not be closed.
0 stops had warnings and could not be closed.
Please help

Hello,
Look at 852639.1. You have issue with tigger.
Regards,
Luko

Ship confirmation error.

While Ship confirming a sales order there is an error - The Action cannot be performed because the selected records are not eligible.
What is the reason for this?

You may also review:
[Note: 735635.1 - Can Not Ship Confirm An Order|https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=735635.1]
[Note: 466276.1 - Ship Confirm (WSHFSTRX) Errors-Cannot Ship Confirm-Fnd_api.G_exc_error E|https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=466276.1]
[Note: 337733.1 - Unable to Ship Confirm An Order That Errors With This Action Cannot Be Performed On All Selected Records|https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=337733.1]

Cannot ship confirm order...

Hi,
I get the following error when trying to ship confirm the order: Error: The action can not be performed because the selected records are not eligible.
I have included the status data below:
Sales Order Window:
Order Status: Booked
Order Line Status: Picked
Additional Line Information:
Delivery Status: Confirmed
Pick Status: Staged/Pick Confirmed
Current Trip Status: Confirmed
Shipping Transactions Window:
Lines/LPNs Tab:
Line Status: Staged/Pick Confirmed
Next Step: Ship Confirm/Close Trip Stop
Delivery Tab:
Status: Confirmed

Thanks for the suggestions. Note 781923.1 brought me back to my starting point:
Sales Order Window:
Order Status: Booked
Order Line Status: Picked
Additional Line Information:
Delivery Status: Confirmed
Pick Status: Staged/Pick Confirmed
Current Trip Status: Confirmed
Shipping Transactions Window:
Lines/LPNs Tab:
Line Status: Staged/Pick Confirmed
Next Step: Ship Confirm/Close Trip Stop
Delivery Tab:
Status: Confirmed
Path by Stop:
Status: Open (Sequence 10)
Activity: Awaiting Pickup (Sequence 10)
Status: Open (Sequence 20)
Activity: Awaiting Drop off (Sequence 20)
Path by Trip:
Status: Open
Activity: Remaining
Note 843408.1:
To workaround this issue, manually close all of the sequence on the Associated Trip Stop.
Once this is done, the Interface Trip Stop program should automatically run which should then interface all of the lines.
To manually close the sequence on the Trip Stop
Query the order
Click on Path by Trips tab
Go to sequence 10
Do an update status to Arrive
Then close it
I can update the status to "Arrive", but I cannot close the line. And, I cannot update the status for Sequence 20.
I do not think that Note 453414.1 applies because this is not an internal sales order.
Note 783074.1 suggests that the delivery be reopened. This is the same advice given in Note 781923.1 which brought me back to my starting point.
Thanks for your help, and I look forward to your reply!

Interface trip stop not running on ship confirm

Version: 11.5.10.2.
Hi Guys
While ship confirming the orders, for some of them, interface trip stop is not automatically running which keeps the order status " shipped" and the order does not become eligible for running autoinvoice.
We have to unassign it from trip and autocreate delivery manually. from actions menu.
This is not happening for all the orders, this is happening for some of them.
What can be the root cause ? Please assist.
Note:
Defer interfaces is already unchecked.
Regards
Nouman Shaikh

While processing ship confim, the interface trip stop request does not initiate by itself for some of the orders.
What can cause it ?
In such situation, we need to manually autocreate trip.
What can be the reason behind it ? How to avoid it.
I believe this is an an effective community.
Regards
Nouman Shaikh

IStore problem with Ship/Confirm

Hello,
We are running Oracle iStore on Oracle Application Server with Oracle DB 9i.
We have a problem when we try to Ship/Confirm at item that was purchased on our website.
We open the Oracle E-Business Suite window and select Ship Confirm in the Query Manager and enter our:
From Order Number: 7777
To Order Number: 7777
When the record is round it is properly filled in and shows up on the Lines/LPNs tab.
The trouble starts when I click on the "Delivery" tab. We should see the same record at the top of this window but instead it is blank. An attempt to do a Ship/Confirm at this moment gives the error message:
APP-WSH-228467: You cannot perform an action on a new record.
I'm not an Oracle pro and have so far been unable to find anything about this error message. If anyone has any comments or suggestions it would be great.
Sincerely,
Jerry

You can use Javascript to confirm a delete, and delete an object in the following manner.
//link to delete an object..
<a href="thisPage.jsp?delete=<%= itemID %>"
onClick="return confirm('Are you sure you wish to delete this item?');">delete</a>Then, at the top of the JSP pageif(request.getParameter("delete") != null)
//do whatever to delete, then load the page as normal
}Now, your item will be deleted, and the page will be refreshed to show the changes.

Dispatcher status showing stopped for disaster recovery server.

HI,
today to test the data in our disaster recovery server for which we have log shipping every 30minutes we started the server in sap level during the process we can see that work +disp status is showing stopped.when i checked the log files in work directory it is showing below errors.
C sloledb.cpp [OpenOledbConnection,line 22822]: Error/Message: (err 4060, sev 0), Cannot open database "INP" requested by the login. The login failed.
M * LOCATION    SAP-Server atriooonsapdr01_INP_00 on host terhsapdr01 (wp 0)
M * ERROR       tskh_init: db_connect
M *
M * TIME        Mon Oct 06 16:31:42 2008
M * RELEASE     640
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          13
M * MODULE      thxxhead.c
M * LINE        9780
M * COUNTER     1
kindly suggest what to check and how to resolve.

Hi Anil.
you should be sure if user SAPINPDB exists in the database system and it is mapped to the SAPINPDB user of the DB.... this if you use SQL Server, but the rule should be something like this in other DB systems!!!
Regards
Pedro

Apple File Service in Server Admin tools shows stopped but is running fine

Hi
I am having a bizzare issue and not getting anywhere fast and hope anyone can help and would be appreciated.
What happened is one disk failed in our Xserve Raid (Raid 5)and we had to replace the drive in the server which rebuilt itself fine.
The issue is since we rebuilt the raid, the Xserve is showing the Apple File Service as stopped with 10.3.9 server admin.
The service is running fine as all the users including myself can connect using AFP, but I have no way to manage the AFP connections on the server.
I have tried rebooting and putting the server tools on a desktop. Though I still have the same issue.
Has anyone come across a similar problem with a service running and unable to manage in Server admin?
Any help would be appreciated.

Hi Bene
On the server launch terminal
su root (supply the password when prompted)
serveradmin status afp
The service should report that its ‘RUNNING’
serveradmin stop afp
serveradmins status afp
The service should report that its ‘STOPPED’
serveradmin start afp
serveradmin status afp
It should now be ‘RUNNING’ again
You could try running fsck and DiskWarrior on the RAID as the problem could lie with the Directory being damaged or corrupted. No need to reboot the server with the DiskWarrior disk (v3.03 or 4.0) just drag the application off the CD to the Server volume and run it from there. Make sure that all users are not connected to the RAID volume affected as DiskWarrior will unmount the whole drive.
Hope this helps.

Anyone familiar with Ship Confirm (P4205) Program- where changes were made

Interested in finding someone who would know in detail pros and cons when making changes particularly to this program trying to alter when inventory is released and when the actual ship date is updated.
This has come up due to a 2 year change that included an additiona status to ensure that Invoicing could not be done until product had left our site. However now we are posed with a different challenge as data show ship confirmed possibly two or three days before truck leave site which means Invoicing is held up that many days as well based on our new changes which pose a potential problem with Revenue eing reported ina different period. (Could see this at monthend). We have reports in place to ensure that things are in check, but audtitor keep bringing the issue up. so I am wondering if anyone has had a simliar issue.

I am haveing no luck getting my program to work... so
if anyone could look at it and make it happen that
would be great..... If you do change any think I would
like you to comment it so I know where the changes
were made.Two things that may help you:
1 - Post your code using the special tokens - it makes reading easier.
2 - Explain, in details, what is wrong with your program, don't make us copy, compile and run it.
Rafael

Unable to view SAP Help files --Cannot Open Frameset.htm Files from 'help.s

Unable to view SAP Help files --Cannot Open Frameset.htm Files from 'help.sap.com'
Open Internet Explorer
Types in http://help.sap.com/
Click on mySAP ERP
Click on English
The webpage goes to
http://help.sap.com/saphelp_erp2005vp/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
It shows the status done but what I see is just a blank page
I tried going to different areas of SAP Help files but no success
I cannot even open Help on Help http://help.sap.com/saphelp_erp2004/helpdata/en/3f/a42938955df162e10000009b38f842/frameset.htm
None of the other users have this issue

Hi
I am able to open your links. I think there is some problem in your internet explorer. please check
regards
Srinivas

Unable to find Project Show Categories in the JDeveloper main menu

Hello -
I am as new to OAF development as it gets...
I have the same questions that were asked in the forum already on this posting: Unable to find Project > Show Categories in the JDeveloper main menu
However, the questions were never answered and I cannot reply to that posting.
Here are the original questions...
I am working on tutorials in Jdeveloper 10.1.3.3.0.
Can any one of you know about "Show Categories"
Unable to find Project > Show Categories in the JDeveloper main menu Jdeveloper 10.1.3.3.0
I am looking this example and try to create the same from C:\p9172975_R12_GENERIC\jdevdoc\WebHelp\toolbox\labs\lessons\search\exercise.htm
See Step 1.3 Organize Your Project Into Categories.
Question 2) I didnt understand Step 2 also.
Select the TutorialLabs.jpr project in the Navigator, right-click and select New Business Components Package... from the context menu.
I am unable to find New Business Components Package.
Please help. Thanks!
Steve

Hi Steve,
Have you created new OA workspace for that ?
Also check this link for JDev setup and running helloWorldPG:
http://sushantsharmaa.blogspot.in/2012/09/jdeveloper-setup-for-oa-framework.html
--Sushant

While releasing a PO an error showing PO cannot be released

While checking the PO release an error showing PO cannot be released is showing.The release button is not appearing from the first code itself

Hi,
The following are the various reasons for the errormessgae.
1. PO would have already released.
2. PO would not have come under the perview of release u defined
3.You would not have authorization for release M_EINK_FRG object.
4.The charetarestcs defined will not come for this PO properties.
ETc.
Mostly , if all the config is setand done and working fine for other POs tooo then this PO iswith the problem.
Do you have this problem for other POs too with the same kind of PO?
Regards,

Error: Show Details cannot be executed when multiple items are selected in a report filter field or in a slicer

I have connected TABULAR Model to Excel, and in the pivot the filter is on multiple dimensions. When doing the drillthrough action it gives error - Error: Show Details cannot be executed when multiple items are selected in a report filter field or in a slicer
Is there any workaround to this error? so that drillthrough can be done even with multiple selection.

Hi Vikas,
The reason behind the error message requires the knowledge on what happens at the backend. When you perform a drill-through action, a query is sent to Analysis Services. This query is expressed in a query language called Multi-Dimensional Expression (MDX).
Since the MDX language doesnot support drill-through command against a set (collection of tuples) an error is persisted.
For now, there is no workaround as it is a limitation of the underlying language that is generating the query.
When multiple items are selected you lose the ability to drill-down on individual metrics. To resolve you must either:
1. Select a single Item.
2. Select all items.
Hope this helps!
Please mark as Answer if this helps! Thanks, Rajasekhar.

Unable to ship confirm, showing stops cannot be set to status closed

Similar Messages

Maybe you are looking for