Unable to split up conference call on iPhone5

When i am on a conference call and i want to disconnect one of the callers, my only option is to disconnect the conference call all together!!! I called verizon wireless and they said "verizon removed that feature"!!! This is really frustrating and annoying!!!! when are they going to reactivate that feature again???? If nokias or sony ericsons from the 1990's were able to split up a conference call why can't a futuristic iPhone do that??? Also if i am on conference call and want to speak on one of the parties privately, i am unable to do that either!!!

Con esta solución me funcionó PERFECTAMENTE.
Si por alguna razón no podéis descolgar las llamadas:
Sistema->Ajustes->Personalización->Gestionar notificaciones-> Aquí hay un apartado de "inhabilitadas" comprobar que InCallUI esté activada (tick verde)
Ahora ya puedo utilizar el teléfono con normalidad.
Muchas gracias Mr_O por la solución.
This solution worked for me PERFECTLY.
If for some reason you can not pick up the calls:
System-> Settings-> Customization-> Manage notificaciones-> Here is a section of "disabled" check InCallUI is on (green tick)
Now I can use the phone normally.
Mr_O thank you very much for the solution.

Similar Messages

  • External callers unable to join conference calls

    Scenario:  A conference call is set up using the scheduler.  Lync users are able to join the conference calls.  Users from outside PSTN are unable to join the call.  They get to the attendant, and are told they are being joined to the
    conference, then get a message "Sorry, I can't seem to connect you to your meeting right now.  Goodbye." and the call disconnects.
    Looking at call traces, I see the following error messages in the CAAServer log:
    Component: CAAServer
    Level: TL_ERROR
    Flag: TF_DIAG
    Function: CaaCall.EndTransfer
    Source: caacall.cs(3631)
    Local Time: 08/26/2014-18:28:36.161
    Sequence# : 0001BE31
    CorrelationId : 64624070
    ThreadId : 0BA8
    ProcessId : 0BB0
    CpuId : 0
    Original Log Entry :
    TL_ERROR(TF_DIAG) [0]0BB0.0BA8::08/26/2014-22:28:36.161.0001be31 (CAAServer,CaaCall.EndTransfer:caacall.cs(3631))[64624070]ConferenceFailureException. ConferenceID=[91127] InstanceID=[b64b9467-db72-41bb-a2b5-673d76777ea4]
    Component: CAAServer
    Level: TL_ERROR
    Flag: TF_DIAG
    Function: CaaCall.HandleUnexpectedException
    Source: caacallerrorhandling.cs(51)
    Local Time: 08/26/2014-18:28:36.226
    Sequence# : 0001D265
    CorrelationId : 64624070
    ThreadId : 0BA8
    ProcessId : 0BB0
    CpuId : 2
    Original Log Entry :
    TL_ERROR(TF_DIAG) [2]0BB0.0BA8::08/26/2014-22:28:36.226.0001d265 (CAAServer,CaaCall.HandleUnexpectedException:caacallerrorhandling.cs(51))[64624070][Enter] exception=[Microsoft.Rtc.Collaboration.ConferenceFailureException:The operation failed due to a response
    from the server. For more information, examine the properties on the exception and inner exception.
       at Microsoft.Rtc.Signaling.SipAsyncResult`1.ThrowIfFailed()
       at Microsoft.Rtc.Signaling.Helper.EndAsyncOperation[T](Object owner, IAsyncResult result)
       at Microsoft.Rtc.Collaboration.McuSession.EndSendCommandInternal(IAsyncResult result)
       at Microsoft.Rtc.Collaboration.AudioVideo.AudioVideoMcuSession.EndTransfer(IAsyncResult result)
       at Microsoft.LiveServer.Caa.CaaCall.EndTransfer(IAsyncResult asyncResult, Boolean& retry, Exception& caught)
    Detected at System.Environment.get_StackTrace()
       at Microsoft.Rtc.Collaboration.ConferenceFailureException..ctor(String message, Exception innerException)
       at Microsoft.Rtc.Collaboration.Conferencing.SendCommandAsyncResult.CreateConferenceFailureException(ConferenceCommandResponse commandResponse, Exception innerException)
       at Microsoft.Rtc.Collaboration.Conferencing.SendCommandAsyncResult.ProcessCccpResponse(SipMessageData messageData, responsetype response, Boolean& isPendingResponse)
       at Microsoft.Rtc.Collaboration.Conferencing.SendCommandAsyncResult.ProcessStatusMessage(SipMessageData statusMessageData, responsetype response)
       at Microsoft.Rtc.Collaboration.Conferencing.StatusMessageReceivedWorkItem.Process()
       at Microsoft.Rtc.Signaling.AsyncWorkitemQueue.ProcessItems()
       at Microsoft.Rtc.Signaling.SerializationQueue`1.ResumeProcessing()
       at Microsoft.Rtc.Signaling.SerializationQueue`1.ResumeProcessingCallback(Object state)
       at Microsoft.Rtc.Signaling.QueueWorkItemState.ExecuteWrappedMethod(WaitCallback method, Object state)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading._ThreadPoolWaitCallback.PerformWaitCallbackInternal(_ThreadPoolWaitCallback tpWaitCallBack)
       at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)] m_conferenceID=[91127] m_conferenceUri=[sip:[email protected];gruu;opaque=app:conf:focus:id:4TPY99KF] InstanceID=[b64b9467-db72-41bb-a2b5-673d76777ea4]
    Component: CAAServer
    Level: TL_ERROR
    Flag: TF_DIAG
    Function: CaaCall.HandleUnexpectedException
    Source: caacallerrorhandling.cs(51)
    Local Time: 08/26/2014-18:28:36.226
    Sequence# : 0001D265
    CorrelationId : 64624070
    ThreadId : 0BA8
    ProcessId : 0BB0
    CpuId : 2
    Original Log Entry :
    TL_ERROR(TF_DIAG) [2]0BB0.0BA8::08/26/2014-22:28:36.226.0001d265 (CAAServer,CaaCall.HandleUnexpectedException:caacallerrorhandling.cs(51))[64624070][Enter] exception=[Microsoft.Rtc.Collaboration.ConferenceFailureException:The operation failed due to a response
    from the server. For more information, examine the properties on the exception and inner exception.
       at Microsoft.Rtc.Signaling.SipAsyncResult`1.ThrowIfFailed()
       at Microsoft.Rtc.Signaling.Helper.EndAsyncOperation[T](Object owner, IAsyncResult result)
       at Microsoft.Rtc.Collaboration.McuSession.EndSendCommandInternal(IAsyncResult result)
       at Microsoft.Rtc.Collaboration.AudioVideo.AudioVideoMcuSession.EndTransfer(IAsyncResult result)
       at Microsoft.LiveServer.Caa.CaaCall.EndTransfer(IAsyncResult asyncResult, Boolean& retry, Exception& caught)
    Detected at System.Environment.get_StackTrace()
       at Microsoft.Rtc.Collaboration.ConferenceFailureException..ctor(String message, Exception innerException)
       at Microsoft.Rtc.Collaboration.Conferencing.SendCommandAsyncResult.CreateConferenceFailureException(ConferenceCommandResponse commandResponse, Exception innerException)
       at Microsoft.Rtc.Collaboration.Conferencing.SendCommandAsyncResult.ProcessCccpResponse(SipMessageData messageData, responsetype response, Boolean& isPendingResponse)
       at Microsoft.Rtc.Collaboration.Conferencing.SendCommandAsyncResult.ProcessStatusMessage(SipMessageData statusMessageData, responsetype response)
       at Microsoft.Rtc.Collaboration.Conferencing.StatusMessageReceivedWorkItem.Process()
       at Microsoft.Rtc.Signaling.AsyncWorkitemQueue.ProcessItems()
       at Microsoft.Rtc.Signaling.SerializationQueue`1.ResumeProcessing()
       at Microsoft.Rtc.Signaling.SerializationQueue`1.ResumeProcessingCallback(Object state)
       at Microsoft.Rtc.Signaling.QueueWorkItemState.ExecuteWrappedMethod(WaitCallback method, Object state)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading._ThreadPoolWaitCallback.PerformWaitCallbackInternal(_ThreadPoolWaitCallback tpWaitCallBack)
       at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)] m_conferenceID=[91127] m_conferenceUri=[sip:[email protected];gruu;opaque=app:conf:focus:id:4TPY99KF] InstanceID=[b64b9467-db72-41bb-a2b5-673d76777ea4]
    Component: CAAServer
    Level: TL_ERROR
    Flag: TF_DIAG
    Function: CaaCall.TransferCompletedQueued
    Source: caacall.cs(3739)
    Local Time: 08/26/2014-18:28:36.231
    Sequence# : 0001D269
    CorrelationId : 64624070
    ThreadId : 0BA8
    ProcessId : 0BB0
    CpuId : 2
    Original Log Entry :
    TL_ERROR(TF_DIAG) [2]0BB0.0BA8::08/26/2014-22:28:36.231.0001d269 (CAAServer,CaaCall.TransferCompletedQueued:caacall.cs(3739))[64624070]Call Transfer Failed. InstanceID=[b64b9467-db72-41bb-a2b5-673d76777ea4]
    The unexpected error entry includes this information in the diagnosticUtils section:
    Component: CAAServer
    Level: TL_INFO
    Flag: TF_DIAG
    Function: DiagnosticUtils.TryCreateSignalingHeader
    Source: diagnosticutils.cs(269)
    Local Time: 08/26/2014-18:28:36.231
    Sequence# : 0001D268
    CorrelationId :
    ThreadId : 0BA8
    ProcessId : 0BB0
    CpuId : 2
    Original Log Entry :
    TL_INFO(TF_DIAG) [2]0BB0.0BA8::08/26/2014-22:28:36.231.0001d268 (CAAServer,DiagnosticUtils.TryCreateSignalingHeader:diagnosticutils.cs(269))Creating SignalingHeader for InstanceID=[b64b9467-db72-41bb-a2b5-673d76777ea4], header-name=[ms-diagnostics], header-value=[10010;Reason="Gateway
    side Media negotiation failed";Source="LYNC-FE.itprocare.com";component="MediationServer";sipresponsetext="Invite with Replaces failed because Gateway side reinvite failed.";DialogID="f94f35b9-7f5d-4bcd-94a8-de0fb2d8c4c6;df1bec7e24;24010080"]
    Which matches up with an error in the SIP trace:
    TL_INFO(TF_PROTOCOL) [0]0DEC.0A48::08/26/2014-22:28:36.151.0001ac66 (SIPStack,SIPAdminLog::TraceProtocolRecord:SIPAdminLog.cpp(125))$$begin_record
    Trace-Correlation-Id: 3329945913
    Instance-Id: 00000688
    Direction: outgoing
    Peer: lync-fe.itprocare.com:51307
    Message-Type: response
    Start-Line: SIP/2.0 491 Invite with Replaces failed because Gateway side reinvite failed.
    From: <sip:[email protected];gruu;opaque=app:conf:audio-video:id:4TPY99KF>;tag=26f350618b;epid=6DF0663499
    To: <sip:[email protected];gruu;opaque=srvr:MediationServer:BMFt1DuKo1KYsGtnqeobCwAA;grid=9d179e4c3aeb4fd7aedd36d7853ad98b>;epid=26F55811B8;tag=2e6beef249
    CSeq: 5 INVITE
    Call-ID: af099053-d8aa-4ca4-9820-936e8522611c
    Via: SIP/2.0/TLS 10.160.1.47:51307;branch=z9hG4bKeb2e7ed6;ms-received-port=51307;ms-received-cid=9B00
    CONTENT-LENGTH: 0
    P-ASSERTED-IDENTITY: <sip:5853307343;[email protected];user=phone>
    SERVER: RTCC/4.0.0.0 MediationServer
    ms-diagnostics: 10010;source="LYNC-FE.itprocare.com";reason="Gateway side Media negotiation failed";component="MediationServer";SipResponseText="Invite with Replaces failed because Gateway side reinvite failed."
    ms-diagnostics-public: 10010;reason="Gateway side Media negotiation failed";component="MediationServer";SipResponseText="Invite with Replaces failed because Gateway side reinvite failed."
    ms-endpoint-location-data: NetworkScope;ms-media-location-type=intranet
    Message-Body: –
    $$end_record
    The trunks are configured with REFER off and MediaBypass Off.
    We have recently moved to a direct SIP trunk from a vendor on Microsoft's Certified list.
    Lync version is 2010, with the latest CUs applied.  All other calling appears to be working correctly.  The certificate on the servers are using the SHA1 algorithm (I have seen some similar issues discussed if this was not the case.)
    At this point, I have reached the end of my immediate troubleshooting skills with this system.  Can anyone offer any suggestions as to what might be going on here?
    Thanks for any help.
    -Tim
     

    Hi,
    Please check if the default gateway associated to the Mediation Server is up or not.
    Please check if Media traffic on the Gateway be blocked with the issue of wrong encryption. Make sure it is using SRTP (not RTP). If you use RTP, please change it and then test again.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Unable to conference call

    I am unable to conference calls. I just get a message "Operation Failed" when I click on Join Conference. Please help

    I am also unable to make conference calls. I just get a message "Operation Failed" when I click on Join Conference. Please help

  • Unable to diall corparate tollfree conference calls

    Please help with case. Issue description is as follows.
    1. My Z10 handset and my airtel SIM together - unable to dial conference calls that start with 000 800 ** ****
    2. My airtel sim in another handset, works
    3. Another SIM in my Z10 Handset works.
    Any help is appreciated.

    Hey vattokutraj,
    Welcome to the BlackBerry Support Community Forums.
    Thanks for the question.
    This issue can be resolved by your network service provider.  I would suggest getting a new SIM card from airtel.
    Let me know if you have any more questions.
    Cheers.
    -ViciousFerret
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click  Accept as Solution for posts that have solved your issue(s)!

  • Unable to make conference call + calls dropping with iPhone 6? :(

    I have an iPhone 6 and i keep experiencing my phone calls randomly dropping out on me. I would sometimes hear a beeping noise and then a 'call failed' message would appear on the screen. Other times the call would just cut off and the screen would go back to the caller information or the home screen. Second problem is that i cannot create a conference call.  Please help! 

    Hi ,
    To make the conference call, click here for information.
    The dropped calls, is this the one area?
    Do you have any problems with texts?
    Thanks.

  • Why can I no longer connect a conference call?

    Since the iOS 7 update, I am unable to connect to a conference call. Is this an ongoing problem?

    It is similar to call waiting. The calls are swapped rather than connected.

  • Conference call not working in IPCCX callcenter environment

    hi,
    when i make a conference call using "conf" soft key. the initiator hears the busy tone when adding third party..  i am facing the same problem when all extensions are internal numbers...the cucm version is 6.1(4) and ipccx 7.0
    Regards
    Nareh

    If you are unable to perform a conference from your phone than your issue is unrelated to UCCX and is somewhere in your UCM implementation.

  • Droid Incredible won't Conference Call - VZW Area Supposed Known Issue

    My Droid Incredible won't connect when you try to add in 2nd call. No one in my area can conference call with their Droids...not even the VZW Store Droid demo models or the reps there who have the Incredible. My friends have tried conference calling with their Droid's with no luck as well. VZW tech says its a known issue, and until Verizon pushes out update to our area - I'm out of luck! The rep said my options are that they can replace my phone with a different phone model or of course I can break my contract. Really? You want me to go to Apple and get your competitor's Iphone?

    With the Droid Incredible I do not have the SEND option once I am connected to the first party. I just have the END CALL button on my screen. I just got off the phone with Customer Service who reviewed the Tech support notes and she said according to the Ticket the issue is my area, and the way the Droid's are designed to conference call. The work around in my area is to hit SEND twice to connect the 2nd party, however she did state, as I can observe, that the Droids do not have the option to hit send on a 2nd call. My friend has a Droid X in my area and he too is unable to conference call. According to trouble ticket they cannot do anything for me. I am out of luck and my only option is for VZW to give me a new model phone, well we all know the only comparable phone is the Droid X which won't help me as it can't conference call either. With what I do, I need to be able to conference call and if I pay $300 for a phone with the feature, I expect Verizon to accomodate me so this just boggles my mind why Verizon isn't working hard to address this issue. So the only other alternative I see is to break contract and move to AT&T and get the Iphone, but I really do love my Incredible so this is a hard decision. Why is Verizon not working to address this issue? Who can I talk to???

  • Did you know that the  carrier Verizon offer the merge conference call or internet while on call on the iphone? Only AT

    Did you know that you can't use the merge function on a iPhone 4s with Verizon Wireless? They blocked the function only AT&T has it, also Verizon doesn't allow browsing the Internet while on a call like AT&T, huge mistake Verizon. For people that conference call, don't get tricked into changing carriers until Verizon changes this feature.

    Not sure about the merging of calls, but being able to browse the internet while on a call can't be done with CDMA technology -- so it's not that Verizon doesn't allow it, it just can't be done on their network. This is old news ...

  • Unable to split the only visible partition (C) on a fresh system - 4 primary partitions

    Hello,
    tl;dr I am probably stuck with 4 primary partitions (two WINRE, EFI, and C), and unable to split C on a fresh system installation from HP DVDs.
    320GB HDD has failed on my G6 2233 HP laptop. I've mounted a 500GB replacement, and done the following things:
    installed Windows 8 from the HP System Recovery DVDs (provided by HP, not recorded by me, fresh installation)
    removed the recovery partition with HP Recovery Manager
    installed all Windows 8 updates, and HP Support Assistant updates
    upgraded to Windows 8.1
    installed all Windows 8.1 updates, and HP Support Assistant updates
    Went to the system partition tool, to see 4 primary partitions created...
    At this point I was unaware, this may be an issue. I've tried to split C as seen on the image. Wasn't able to set desired values (max value was to about two of equal size, due to ummovable files), but that was nothing new for me - on the previous 320GB HDD I've ran into the same issue, as I could (but COULD) do two about 14xGB partions.
    Here I've wished for 120GB and 344GB.
    Anyway, even with various values I've got an error on the next step, claiming that there is no room on the HDD.
    Then I've decided to try EasyUS software, as it helped me in the past.
    First screen is without any action (there is a bunch of weird partitions there, all created by HP software/OS).
    I could choose to decrease the partition size, but option to create on from the unallocated space was not active.
    I am confused. If I am not mistaken, I should not remove the two WINRE and one EFI partition, but I either convert C to logical partition (have no idea how, this option is not active on EasyUS (could do that on my USB HDD drive), or remove one or more of the other primary partitions.
    Even if I will find a way to convert C to logical, is that safe, and should I after D is created return C to primary?
    I've tried to play safe, and let the HP/OS software do the job, and they left me with 4 primary partitions...
    OK I've found the guide which sadly does not seem safe... Any other ideas?
    http://h30434.www3.hp.com/t5/Other-Notebook-PC-Questions/How-to-repartition-HDD-of-HP-notebook-with-...
    Unfortunately they seem to habe different names... Probably are doing simmilar things, but could someone just point out is the EFI partition HP Toolls as mentioned in the guide etc.
    I guess I should, after installing Windows 8, and removing the recovery partition, create a new partition then, and upgrade to 8.1... Would solve many issues, however I am not sure it would work, and really, do not want to waste two more days on this...
    This question was solved.
    View Solution.

    Hi @IgiveUpOnHP ,
    I grasp you are having an issue with partition the drive.
    Windows only ever allows 4 primary partitions because the word primary is only applilcable to the MBR partition tables which only allow for 4 partitions.   You can have extended partitions.  Here is a link to Partitioning and Naming Drives (Windows 8)   as a guide.
    Good Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Why my iPhone wont let me add to conference call or hang up on a particular person?

    Why my iPhone wont let me add to conference call or hang up on a particular person?

    Hey D.j.,
    Welcome to the Apple Support Communities. The following article will go over the Conference features and will provide some help.
    iPhone: Using Conference
    http://support.apple.com/kb/ta38608
    If you continue to have issues with the Conference feature, the next step would be to reset settings or backup and restore the device and setup as new. To reset settings on the device: Settings > General > Reset All Settings
    If you need to restore your iPhone, the following article will assist with this.
    iOS: How to back up your data and set up as a new device
    http://support.apple.com/kb/HT4137
    Regards,
    -Norm G.

  • HI I have an Iphone 3GS and the microphone jack works when I play music but not when making phone calls.   please help as I use it for conference calls

    Hi   I use my phone for conference calls and use the microphone jack to connect to speakers.      It doesnt work when making phone calls but when i play music on the phone the jack works with the external speaker.   

    Happy to have been of help. Hope all goes smoothly.
    BTW, for the sake of others who may help you here, it's usually most polite if you mark the post that answered your question as being the one that "solves" it, not your own post. That's how people get points here, if a questioner marks their post as either "helpful" or "solving". It's not an issue for me, but for those just starting out in the forums it may be important to them. See:
    https://discussions.apple.com/static/apple/tutorial/mark.html
    and
    https://discussions.apple.com/static/apple/tutorial/reputation.html
    Regards.

  • Problems with conference calls(adding and merging calls) after upgrade to ios 8.1.2 on iphone 5s

    I am having weird problem intermittently with adding calls or merging them or swapping them. The issue happens 8 out of 10 times whenever I try to do a conference call. This issue came up after I upgraded to 8,1.2. Never experienced this in 8.1.1 or previous version.
    Some of the scenarios that I have experienced is:
    1. While on the call, when I try to add a new contact, it just doesn't dial the second number.
    2. Sometimes the second number gets dialed, cannot merge the calls.
    3. After talking to the second person, cannot go back to the first call.
    I am very sure that this is not a carrier issue as it worked flawlessly before upgrade.
    Anyone experienced this before? Any suggestions?

    Thanks for the above infromation. I did a complete restore of my iphone through iTunes connecting it to my computer via cable. iOS8.1.3 was re-installed. I then added back my settings and data which were backed up prior to restoring the phone. I still have the same issue with conferencing and adding a third caller. When I hit the [+] box, the existing caller is not put on hold. The phone appears to be making a call but it is not dialing to the 3rd party. Shortly thereafter, the Merge icon appears but there is no active call to merge with. I have tried this several times using my wife's iPhone and our home phone to set up a 3-way call. I know it is not working because the 3rd phone (our home phone) does not ring. Is this a hardware problem? My wife's iPhone 6 works with no problem and was purchased the same time I purchased my iPhone 6. Probably time for a visit to the Apple Store unless there is another solution.
    iPhone 6; iOS 8.1.3; Carrier: Verizon

  • Conference calls all of a sudden do not work??

    We have a Call Manager 5.1 with MGCP controlled gateways. Out of no where our ablility to ad hoc conference call does not work. We connect the calls and no one can hear one another. Any suggestions as to what could be the cause? Any feed back would be great.
    Rgds,
    Vicky

    Here is the Troubleshooting and Debugging VoIP Call Basics.
    http://www.cisco.com/en/US/tech/tk1077/technologies_tech_note09186a0080094045.shtml

  • Verizon recording cut into my conference call

    Verizon recording cut into my conference call and everyone (100 people on the call) heard it. I was listening to the conference with the mute on (*6). My phone rang--which everyone heard--and the Verizon message that goes to the caller came on. Everyone on the conference call stopped talking as verizon said, "The person you are trying to call cannot be reached at this time. Please call later." This went over the conference call twice. Can I prevent this or is it a Verizon glitch?

    Whilst I have no idea about Verizon ,I use a similar device in UK receiving cellular over broadband in property and I have wired broadband with unlimited use
    However the device is certainly using bandwidth over my wired service when active
    I would try to get a definitive does it or doesn't it and if not  then they will cover any cost if they are wrong

Maybe you are looking for

  • Error while loading data from write optimized ODS to cube

    Hi All, I am loading data from a write optimized ODS to cube I have done Generate Export Datasource schedulled the info packge with 1 selection for full load then it gave me following error in Transfer IDOCs & TRFC Info IDOC 1: IDOC with errors added

  • Firefox doesn't download files using Download Helper

    When I use the "add-on" Download Helper icon to select a video file (FLV) for download, I'm asked which folder it should go into (as usual). But when I click "Download," the file never appears to start downloading. The number in parentheses next to t

  • Builder vs Factory Patterns

    Hi, I read about builder and factory patterns. But both of them look quite similar. Can u plz help me to understand the difference between them. Thanking You, Chamal.

  • HT5312 I can't seems to recover the security questions at all no matter what?!?

    So i have been having this problem for a month now, & am still trying to solve it, the real problemn is that when i try to purchase an item it asks me to answer my sequirty questions which i forget what they were & i can't make any purchases, only ab

  • Why won't my iPod shuffle connect to itunes?

    I just bought the iPod Shuffle 4th Generation and downloaded iTunes onto my laptop today. The Shuffle won't connect to my iTunes or my computer properly. When I connected it to the computer (Windows 7), it said "unable to sync device" or something li