Unable to ssh Opensuse 12.3 VM after restart

After successful provisioning of an OpenSuse 12.3 instance, I was able to ssh through putty. However, after restarting the VM through the management portal, I am unable to ssh to my server through putty. "Network Connection Timed out" error. Only
peculiar thing that I have noticed is that the hostname is blank in VM->Dashboard.
I am using the "SSH Details" value to ssh and not the Virtual IP address.

Hi,
Thanks for your reply.
If the host name of the VM is lost, in general, it is impossible to connect to the VM.
If the issue persists after restart and you have no importance data in the temporary driver(D:) on the VM, maybe you can delete the VM and keep the attached disks, then recreate a new VM using that disk. (Please note that after recreating the VM, the data on the
D: of the previous VM would be lost)
In addition, if the above solution is not helpful, I recommend you to contact Azure support by submiting a support ticket to better analyze this issue and you won't be charged if this issue is caused by Azure.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

Linked Server unable to Connect in SQL Server 2012 after Restarting SQL Server Service it works fine. Why?

I have created a Linked Server to Access Database of 64 MB in Size located in Remote System to SQL Server 2012.In Start for Some time it works fine and after it is giving the Error
OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST" returned message "Cannot open a database created with a previous version of your application.".
Msg 7303, Level 16, State 1, Procedure Insert_Records_Into_Actual_Calls_History, Line 29
Cannot initialize the data source object of OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST".
Previously I thought it as Permission Issue. By trying some fixes proposed in forums it not fixed. But, after restarting the SQL Server Services without changes to the linked Server it works perfectly. How could i fix it. I don't want restart the SQL Server
Service it leads to Some other process failures.
RehaanKhan. M

After all the Errors, When I am restarting the SQL Server its working correctly.
Whats the problem it is clearing itself after restarting of SQL Server. Why ?. I can't find anything regarding this in SQL Server .
The following are the Errors i got connecting to SQl Server.
OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST" returned message "Cannot open a database created with a previous version of your application.".
Msg 7303, Level 16, State 1, Procedure Insert_Records_Into_Actual_Calls_History, Line 29
Cannot initialize the data source object of OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST".
Error-2:
Executed as user: RMS\Administrator. Cannot initialize the data source object of OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST". [SQLSTATE 42000] (Error 7303) OLE DB provider
"Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST" returned message "Cannot open a database created with a previous version of your application.". [SQLSTATE 01000] (Error 7412). The step failed.
After unchecking the Allow In Process in OLEDB.ACE Provider Properties.
Msg 7399, Level 16, State 1, Procedure Insert_Records_Into_Actual_Calls_History, Line 29
The OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST" reported an error. Access denied.
Msg 7301, Level 16, State 2, Procedure Insert_Records_Into_Actual_Calls_History, Line 29
Cannot obtain the required interface ("IID_IDBCreateCommand") from OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST".
for to fix above error i have followed the instructions in the following link,
http://blogs.msdn.com/b/dataaccesstechnologies/archive/2010/08/19/permissions-needed-to-set-up-linked-server-with-out-of-process-provider.aspx
This also failed to work. I Restarted SQL Server and make the Linked Server Properties Default to my Configuration and it works fine.
Can you suggest me a solution for this issue. Every time i don't want to restart SQL Server Services as it effects other jobs and Processes.
Thank you.
RehaanKhan. M

New BB Z30 Freezing, Docs are unable to Open, microSD card automatically formatted after restart, unable to open Some Pictures, Long time for Charging

I purchased a new BlackBerry Z30 recently from http://store.shopblackberry.com/store/bbrryus/en_US/pd/productID.298806900/categoryID.66826600/paren... and my Phone Model number is STL 100-5. I also purchased a Z30 Leather flip case manufactured by BlackBerry. I am using my BlackBerry Z30 along with the Z30 Leather flip case.
1) Within the first 2 weeks of receiving and using the new BB Z30 device, I noticed a problem of screen not responding some times. My phone has been freezed at the lock screen. My phone is not responding to any key except for the power button. So, I had an option of only restart/Turn Off my BlackBerry Z30 device. All the time whenever I had this problem, I have to restart my device in order to make it work properly again. I complained about this issue with BlackBerry Technical Support. They assisted me to reset the device to factory settings by taking a full backup. After reset also, I still had the same issue.
2) I am using Sandisk Extreme microSD card of 32GB with my BB Z30 device. Some times due to the restart option, all the data which I had on my microSD card is being erased and is filled with an unknown files.
3) I'm also unable to open some pictures which I have taken using BlackBerry Z30. As I observed, most of the pictures which I taken using Blackberry Z30 are unable to be open/view them after a few days. Still, I am able to observe the properties of those pictures. They are in JPEG format only.
4)Also If I create a Word Document on BlackBerry Z30 using Docs to Go Application and saved it. After closing that particular document and If I try to open it, the document file is not opening and projecting me an error of "This is not a valid .Doc file", but while I check the properties of that particular document it is in .doc format. I tried to transfer the file to my laptop using bluetooth. After a few seconds (approx 2-3 seconds) automatically the transferring is cancelled by the BlackBerry Z30 device. However, I tried to transfer the file within that short time using Bluetooth. While I tried to open it on my laptop using Microsoft Office 2013, the file is displaying with a squares of upto 4 pages while I had a content in it of 3 lines only. While I opened my file using Microsoft Office 2013, there is only squares available in that document.
5) My new BlackBerry Z30 is taking a long time of approximately 6-7 hours to charge the device from 10% to 100%
I request someone to help me with this issues. I would like to thank everyone who can help me with these issues in advance.
Solved!
Go to Solution.

On 7th of Jan 2015 I made my device to factory reset. Also I removed microSD card from my device. As I observed for these 3 days, one time while I received a missed call, I tried to have a look at it. I observed that my screen has been freeze at the receiving call position and its not responding. I tried to close and reopened the display of my device with a flip case which I'm currently using for my device. At this time, after 3-4 swipes to unlock the device, again its back into working condition.
About Documents, I'm able to create, save and open the documents without any issues till now.
About Pictures, they are also working fine without any issues.
I also observed the charging time as approximately 3 hours for charging the device from 14% to 100%.

AirPort Utility was unable to find your Apple wireless device after restart

I keep getting this message when I try to setup my time capsule.
"The settings for this Apple wireless device have been successfully updated, but there was a problem re-joining the wireless network or finding the Apple wireless device. You may need to select your network from the AirPort menu and try again."
After this message, the time capsule cannot be seen in the airport utilities at all either, and requires a reset before it becomes visible again. I've tried renaming the network and the time capsule itself to shorter names without punctuation as I'd read sometimes helps, but it doesn't seem to work. I don't have an internet connection set up yet, but that shouldn't be a problem, as I've selected not to connect to the internet for now, and am just wanting to back up my computer for the moment. What is happening here?

probablythestrongest wrote:
I keep getting this message when I try to setup my time capsule.
"The settings for this Apple wireless device have been successfully updated, but there was a problem re-joining the wireless network or finding the Apple wireless device. You may need to select your network from the AirPort menu and try again."
After this message, the time capsule cannot be seen in the airport utilities at all either, and requires a reset before it becomes visible again.
Until you can complete the Time Capsule configuration process, I recommend that you connect it to your Mac with an Ethernet cable instead of depending on a Wi-Fi connection. That would make a lot of sense given the rest of your situation, as it would make your backup process a lot faster.

AirPort Utility was unable to find your AirPort wireless device after restarting.

hey guys. trying to add my (old) airport express to my wireless network. my machine finds and succesfully reconfigures my base station, but then cant find it after the base station restarts. the above msg is what i get...
thoughts?...

T-rax,
thanks for the reply; I should have been more specific. I was trying to extend my network. I actually just stumbled on the fix at macforums, where I tried the hint to use 64-bit vs 128 bit WEP encryption. Seemed to do the trick.

As of this morning (5/19) I am unable to open a new tab, even after restarting my laptop. I have had firefox 3.6.13. I was planning on updating, but I am not sure if that will fix the problem, any suggestions?

I initially thought that my laptop froze up, but this was not the case. I do not want to have to uninstall, I am in school and have a lot of bookmarks that are vital to my learning, to lose those would be detrimental to my education. Can anyone help with this malfunction?

Please update Firefox to 3.6.17 a.s.a.p. the reason being that there was a security breach at Comodo which is an SSL certificate provider recently whereby a number of fraudulent certificates were inadvertently issued. These allow a hacker to impersonate any site including online banking and the Firefox version you're running at the moment will not warn you that the site is a fake. The fraudulent certificates were blacklisted in v3.6.17 and beyond.
See also: http://blogs.comodo.com/it-security/data-security/the-recent-ra-compromise/

Unable to resume Mac App Store download after restart. Help?

Hi so last night I began a download of Empire: Total War and at some point I shut down my computer. Upon restart this morning I was hit with a "waiting" status on the download so I went ahead and quit the storeagent process from activity monitor. Now I've resumed the download and it shows me "downloading" but progress isn't moving.

Not sure why you would have wanted to shut down your computer? I guess you ran out of batts or something.
Try to get it another way:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519

"Airport Utility was unable to find your Airport after restarting"

Airport Express B has been working great for two years, and suddenly it can't be found in Airport Utility.
When I hard reset it, and re-set it up again, I go through the whole procedure, using the Utility to write the new settings : "The settings for this Airport Express have been successfully updated...waiting for Airport Express to restart" and at that point nothing happens - the light stays continuously green, no restart, and shortly afterwards I get the failure message "Airport Utility was unable to find your Airport wireless device after restarting".
I come out of Airport Utility, reopen it, and it can't find the Airport Express. Nothing. A £65 brick that has ceased to be, and this forum is full of people with similar problems. I've tried all of the fixes, including hard-wiring it using Ethernet, and again it goes through the whole procedure abut when trying to restart the AE, fails to find it.
Are Apple making any response to these issues ?

Thanks Martin - I can download it from the Apple website, according to this discussion :
http://discussions.apple.com/thread.jspa?threadID=1085243&tstart=30
My concern is that a) it may not work with an Intel MBP, and that it may break my Airport - totally. Could you let me know what you're running it on ?

TIme Capsule won't connect wirelessly after restart?? HELP!

I plug in time capsule and it shows up on Airport Utility. I enter the information it asks for joining an existing wireless network. We have Fios through Verizon and are running a Verizon wireless router. After seeing my wireless network it asks for the Wireless Security choice. It automatically chooses WEP 128bit so I assume this is correct. It also automatically puts in my password (not sure why) but I go ahead and retype the password for our wireless network. Then this is what I get after several minutes:
"*Airport Utility was unable to find your apple wireless device after restarting.*
The settings for this Apple wireless device have been successfully updated, but there was a problem re-joining the wireless network or finding the Apple wireless device. You may need to select your network from the AirPort menu and try again."
Then when I run Airport Utility the Time Capsule no longer shows up and the only way to get it back is to push the little pin hole reset button in the back for 5 seconds to completely reset the unit. I have done this no less than 5 times.
Please advise...any help would be greatly appreciated!
Thanks,
Jenn

In case anyone has this same problem and ends up reading my post. I, through the help of a very tech savy friend, was able to solve the problem for the most part.
Here is, from what I can remember, he did.
We plugged the TC into one of the LAN ports on the back of my wireless router. We then set the TC up on it's own as a source for connecting to the internet wirelessly. (He had to go into my settings VIA verizon and pull down some codes to make this work.) Once the TC showed up as it's own wireless network on my computer, we were able to do the back up through Time Machine no problem. We ended up just disabling our old verizon wireless router on the server but are keeping it plugged in.
Hope that helps.

I am unable to login from my login page after I restarted my mini mac running snow leopard 10.6 server. I am a new user. Need help

I am unable to login from my login page after I restarted my mini mac running snow leopard 10.6 server. I am a new user. Need help

Try clearing your cache, [https://support.mozilla.org/en-US/kb/How to clear the cache Instructions here]. Then, try going to [https://accounts.google.com Google Accounts]. If there is currently an account singed in, sign out, then back in. After that, try going to Google Adwords.

Issue with cisco acs 4.2.Users unable to login aaa client but after restarting group policy able to login

issue with cisco acs 4.2.Users unable to login aaa client but after restarting group policy able to login

issue with cisco acs 4.2.Users unable to login aaa client but after restarting group policy able to login

I am unable to set up my iphone 5 after reset since am getting a error stating 'unable to reach server' . i tried restoring the same from my computer but i get a error stating server unavailable' . please help me as my phone is stuck at the set up page

i am unable to set up my iphone 5 after reset since am getting a error stating 'unable to reach server' . i tried restoring the same from my computer but i get a error stating server unavailable' . please help me as my phone is stuck at the set up page. so i have already tried recovery mode as well.

Contact Apple support for warranty service.

Unable to print from HP Laserjet P1102 after upgrading to Mavericks

Unable to print from HP Laserjet P1102 after upgrading to Mavericks.

plz try to download the following set of drivers from the link below :::\
http://gimp-print.sourceforge.net/MacOSX.php3
This is a new set of default drivers and mayhelp u in resolving the issue.
Plz do run disk first aid after installing the driver....might suggest even before installaing.
Thanx !! for trying.

Unable to login to apex as admin after apparent successful installation

I am unable to login to apex as admin after an apparent successful installation.
I have an existing Oracle database 11.2.0.1.0 with Oracle Text running on Windows 7 Professional with hundreds of gigabytes of free disk space available. I did everything as an operating system user with administrator privileges. I downloaded the latest version of apex 4.0.2 for all languages, unzipped the downloaded zip file, extracting all files to an apex directory. I changed the working directory to apex and started sql*plus, connected sys as sysdba, ran apexins.sql installation, apex_epg_config.sql and apexconf.sql configuration, apexchpwd.sql to change the admin password, and apxldimg.sql to copy the images, and exec dbms_xdb.sethttpport(8080), unlocked accounts, and granted connect privileges.
The installation log did not show any errors and included:
"Thank you for installing Oracle Application Express.
Oracle Application Express is installed in the APEX_040000 schema.
The structure of the link to the Application Express administration services is as follows:
http://host:port/pls/apex/apex_admin (Oracle HTTP Server with mod_plsql)
http://host:port/apex/apex_admin (Oracle XML DB HTTP listener with the embedded PL/SQL gateway)
The structure of the link to the Application Express development interface is as follows:
http://host:port/pls/apex (Oracle HTTP Server with mod_plsql)
http://host:port/apex (Oracle XML DB HTTP listener with the embedded PL/SQL gateway)
JOB_QUEUE_PROCESSES: 1000"
When I use either browser, Firefox 3.6.12 or Internet Explorer 8.0, and go to http://localhost:8080/apex/apex_admin I get a screen that says:
"Enter Application Express internal administration credentials"
and has boxes for a username and password. When I enter admin and the admin_password that I selected, then click on login nothing happens. I don't get logged in. I don't get an error message. It does not show any signs of anything running. It just sits there. I also don't get any messages from Windows or Norton 360 indicating that a pop-up window was blocked or any such thing. I checked that the services are running and also tried shutting down the computer and re-starting (cold boot), but was still unable to login.
I am a retired developer, not a DBA, so if there is anything else that I should do or check or provide, then please let me know. I have provided a copy and paste of everything that I could think of below. Oddly I don't see an admin user.
SQL> select * from v$version
2 /
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE     11.2.0.1.0     Production
TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL> select status from dba_registry where comp_id = 'APEX'
2 /
STATUS
VALID
SQL> select username, account_status
2 from   dba_users
3 where username = 'ANONYMOUS'
4 or     username like 'APEX%'
5 or     upper (username) = 'ADMIN'
6 order by username
7 /
USERNAME                       ACCOUNT_STATUS
ANONYMOUS                      EXPIRED
APEX_030200                    EXPIRED
APEX_040000                    OPEN
APEX_PUBLIC_USER               OPEN
SQL> select dbms_xdb.gethttpport from dual
2 /
GETHTTPPORT
       8080
SQL> select owa_util.get_version from dual
2 /
GET_VERSION
10.1.2.0.8
SQL> show parameter memory_target
NAME                                 TYPE        VALUE
memory_target                        big integer 1536M
SQL>

Are you sure you did give right path to script ? Yes.
>
If you extract files to folder c:\temp, you have after that folder c:\temp\apex and bunch of sub folders.
For script to update images, you give path to folder where you did extract apex install files.
In above case that is then c:\temp .
>I created a directory c:\apex on my laptop. I downloaded the zip file to that directory. When I extracted the files to folder c:\apex, the result was c:\apex\apex with a bunch of sub folders and files. When I ran the script, I gave the path c:\apex as indicated in my copy and paste. So, I did everything the same as in the quote above, except that I used apex instead of temp.
Try extract Apex install zip to c:\temp and give c:\temp as path for scriptAre you suggesting that I redo the entire installation using c:\temp instead of c:\apex? What difference would that make? Would I need to do some sort of uninstall first?

Unable to SSH to Server with terminal, Putty Works (SOLVED)

Hi all,
I am unable to ssh to a remote server from the terminal, when I try with Putty it works, heres the output of ssh -v
OpenSSH_6.3, OpenSSL 1.0.1e 11 Feb 2013
debug1: Reading configuration data /root/.ssh/config
debug1: /root/.ssh/config line 49: Applying options for testing
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: /etc/ssh/ssh_config line 20: Applying options for *
debug1: Connecting to ********* [*********] port 22.
debug1: Connection established.
debug1: permanently_set_uid: 0/0
debug1: identity file /root/.ssh/************.pem type -1
debug1: identity file /root/.ssh/************ type -1
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_6.3
debug1: Remote protocol version 2.0, remote software version OpenSSH_6.1
debug1: match: OpenSSH_6.1 pat OpenSSH*
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug1: kex: server->client aes128-ctr hmac-md5 none
debug1: kex: client->server aes128-ctr hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug1: Server host key: RSA 50:97:e6:ff:44:01:02:ca:e2:b4:38:41:86:42:2c:c2
debug1: Host '************' is known and matches the RSA host key.
debug1: Found key in /root/.ssh/known_hosts:4
debug1: ssh_rsa_verify: signature correct
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug1: SSH2_MSG_NEWKEYS received
debug1: Roaming not allowed by server
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug1: Authentications that can continue: publickey
debug1: Next authentication method: publickey
debug1: Trying private key: /root/.ssh/************.pem
debug1: read PEM private key done: type RSA
debug1: Authentication succeeded (publickey).
Authenticated to ************ ([************]:22).
debug1: channel 0: new [client-session]
debug1: Requesting [email protected]
debug1: Entering interactive session.
debug1: Sending environment.
debug1: Sending env LANG = en_US.UTF-8
I suspect it has something to do with my terminal? I am using xfce terminal
Update:
so following advice from other forum members, I am marking this as solved. The situation resulted from me installing a new router and this router blocked SSH connections, I search on stackoverflow and tried this fix at
http://stackoverflow.com/questions/2247 … i-does-not
I applied the setting to /etc/ssh/ssh_config and it started working again.
Last edited by zenwong (2013-10-30 08:47:41)

In addition to marking your thread as solved, you should also give a bit of info on how you came to that concolusion and what that confguration does. If you have the expectation that posting in these threads might yeild assistance, you should also assume that there is the expectation that you will have the courtesty to make the thread useful for others in the event that you find the solution on your own. https://wiki.archlinux.org/index.php/Fo … way_Street

Unable to ssh Opensuse 12.3 VM after restart

Similar Messages

Maybe you are looking for