Unable to start any VM's after accidental shutdown.

Hi everybody,
after my beautiful daughter, which i love very much, shutted down my desktop the hard way my HyperV has been down.
I hope she did not waste more than a full day waiting, but i have not been able to find out as i have been unable to start any VM's since. 
The hardware requirements is met and enabled etc. it worked flawlessly prior to the shutdown.
initial error:
"Vm cannot start because the hypervisor is not running." 
and true that -  none of the HyperV services are running, and they won't start when i want to start them manually. 
so i checked the BIOS, Virtualization is enabled in the CPU. so far so good. 
last but not least i checked the BCDedit.exe just in case and the hypervisorlaunctype were set to 'Auto'.
BCDedit print:
osdevice                partition=C:
systemroot              \Windows
resumeobject            {75433aa1-77d7-11e3-820c-8d253c7dc234}
nx                      OptIn
bootmenupolicy          Standard
hypervisorlaunchtype    Auto
Then i went log hunting and found a couple of errors: 
Event viewer\windows log\System
event id 36:
Hypervisor launch failed; the image \Windows\system32\hvix64.exe failed code integrity checks, and cannot be used.
and a second under:
Event viewer\logs for programs and service\Microsoft\Windows\Hyper-V-VMMS
Event ID 15350:
VID driver not running. 
after some googling and reinstalling the feature i eventually came up empty handed, so any assistance will be greatly appreciated. 
Regards
Asbjørn

Hi thank you for the response Bob.
ran the command a couple of time and rebooted as well. 
every time i recieve this message after the SFC:
Windows Resource Protection found corrupt files but was unable to fix some of them
Details are included in the CBS.Log windir\Logs\CBS\CBS.Log
Looked in the and found some of the entries not fixable where regarding hyperV.:
and tried just to try to start a vm and same issue. 
From CBS.log:
2014-04-08 20:38:47, Info                  CSI    0000088b [SR] Beginning Verify and Repair transaction
2014-04-08 20:38:47, Info                  CSI    0000088c [SR] Verify complete
2014-04-08 20:38:47, Info                  CSI    0000088d [SR] Repairing 6 components
2014-04-08 20:38:47, Info                  CSI    0000088e [SR] Beginning Verify and Repair transaction
2014-04-08 20:38:47, Info                  CSI    0000088f Hashes for file member \SystemRoot\WinSxS\amd64_microsoft-hyper-v-drivers-hypervisor_31bf3856ad364e35_6.3.9600.16384_none_210fb36c397c4e2b\hvix64.exe
do not match actual file [l:20{10}]"hvix64.exe" :
  Found: {l:32 b:aR56zgntiLzVXFbmuZz7/YAqKimJJ8ztYR+kY/uDOiQ=} Expected: {l:32 b:2+jsu4cq379AWxcxWFWB4iAqAQzeE6iY8LD8jFZCYLQ=}
2014-04-08 20:38:47, Info                  CSI    00000890 [SR] Cannot repair member file [l:20{10}]"hvix64.exe" of Microsoft-Hyper-V-Drivers-Hypervisor, Version = 6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64
(9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-04-08 20:38:47, Info                  CSI    00000891 Hashes for file member \SystemRoot\WinSxS\amd64_microsoft-windows-e..dapplauncher-client_31bf3856ad364e35_6.3.9600.16441_none_38fd958247084804\WEMSAL_WmiProvider.dll
do not match actual file [l:44{22}]"WEMSAL_WmiProvider.dll" :
  Found: {l:32 b:pycCqcu4FlWSmwf1/XTmpfYCYDDjQqIz6bK4nfexBjE=} Expected: {l:32 b:3tsOAaD084bF+zL+5OFYLF7/QE3kk4zrL8OICJo8fKE=}
2014-04-08 20:38:47, Info                  CSI    00000892 [SR] Cannot repair member file [l:44{22}]"WEMSAL_WmiProvider.dll" of Microsoft-Windows-Embedded-EmbeddedAppLauncher-Client, Version = 6.3.9600.16441,
pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-04-08 20:38:47, Info                  CSI    00000893 Hashes for file member \SystemRoot\WinSxS\amd64_netwew00.inf_31bf3856ad364e35_6.3.9600.16384_none_252dacabb361a7e1\NETwew00.sys do not match actual
file [l:24{12}]"NETwew00.sys" :
  Found: {l:32 b:TMtOkmv4ue8781uyYPEIxz8FVFOYyoTz4kjBiGC02Sc=} Expected: {l:32 b:75xSkHd6Tid9R8h6F0/5RBviPK0vRW01uAhGMEH0Z1w=}
2014-04-08 20:38:47, Info                  CSI    00000894 [SR] Cannot repair member file [l:24{12}]"NETwew00.sys" of netwew00.inf, Version = 6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture
neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-04-08 20:38:47, Info                  CSI    00000895 Hashes for file member \SystemRoot\WinSxS\amd64_prncacla.inf_31bf3856ad364e35_6.3.9600.16384_none_9590ba64d5b91f79\Amd64\CNBJ2530.DPB do not match
actual file [l:36{18}]"Amd64\CNBJ2530.DPB" :
  Found: {l:32 b:8LcvNZBm511T52GSwaqECOaQN2Pm60sxT+RHr6QZOGE=} Expected: {l:32 b:n520k714Uu3utHa5JGQ6HQYbZphKhlMWq5pEmfnCDuw=}
2014-04-08 20:38:47, Info                  CSI    00000896 [SR] Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version = 6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9),
Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-04-08 20:38:47, Info                  CSI    00000897 Hashes for file member \SystemRoot\WinSxS\amd64_windows-defender-am-sigs_31bf3856ad364e35_6.3.9600.16384_none_ad431e16ef9845da\MpAvBase.vdm do
not match actual file [l:24{12}]"MpAvBase.vdm" :
  Found: {l:32 b:d2vTqbHW4/0bBDrraPL9EDQ3smJDUwd1CFbPSIBH1c8=} Expected: {l:32 b:0dMEhN7kYwcdydEE2kpJrc1jlT3hufXi/Vw24qdFm88=}
2014-04-08 20:38:47, Info                  CSI    00000898 [SR] Cannot repair member file [l:24{12}]"MpAvBase.vdm" of Windows-Defender-AM-Sigs, Version = 6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64
(9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-04-08 20:38:47, Info                  CSI    00000899 Hashes for file member \SystemRoot\WinSxS\amd64_wialx008.inf_31bf3856ad364e35_6.3.9600.16384_none_9ca3c194b95ed28c\LXAA3drs.dll do not match actual
file [l:24{12}]"LXAA3drs.dll" :
  Found: {l:32 b:kieFqZCqsO6AQQNNXtIYgybMJnJTkumPv2e2skhEfAg=} Expected: {l:32 b:dw8CQ+SfRzuBuXmiHYtZS1l3e+YdLVc3Enxt1FL6iog=}
2014-04-08 20:38:47, Info                  CSI    0000089a [SR] Cannot repair member file [l:24{12}]"LXAA3drs.dll" of wialx008.inf, Version = 6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture
neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-04-08 20:38:47, Info                  CSI    0000089b Hashes for file member \SystemRoot\WinSxS\amd64_microsoft-hyper-v-drivers-hypervisor_31bf3856ad364e35_6.3.9600.16384_none_210fb36c397c4e2b\hvix64.exe
do not match actual file [l:20{10}]"hvix64.exe" :
  Found: {l:32 b:aR56zgntiLzVXFbmuZz7/YAqKimJJ8ztYR+kY/uDOiQ=} Expected: {l:32 b:2+jsu4cq379AWxcxWFWB4iAqAQzeE6iY8LD8jFZCYLQ=}
2014-04-08 20:38:47, Info                  CSI    0000089c [SR] Cannot repair member file [l:20{10}]"hvix64.exe" of Microsoft-Hyper-V-Drivers-Hypervisor, Version = 6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64
(9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-04-08 20:38:47, Info                  CSI    0000089d [SR] This component was referenced by [l:192{96}]"Microsoft-Hyper-V-ClientEdition-Package~31bf3856ad364e35~amd64~~6.3.9600.16384.Microsoft-Hyper-V"
2014-04-08 20:38:47, Info                  CSI    0000089e Hashes for file member \??\C:\Windows\System32\hvix64.exe do not match actual file [l:20{10}]"hvix64.exe" :
  Found: {l:32 b:aR56zgntiLzVXFbmuZz7/YAqKimJJ8ztYR+kY/uDOiQ=} Expected: {l:32 b:2+jsu4cq379AWxcxWFWB4iAqAQzeE6iY8LD8jFZCYLQ=}
2014-04-08 20:38:47, Info                  CSI    0000089f Hashes for file member \SystemRoot\WinSxS\amd64_microsoft-hyper-v-drivers-hypervisor_31bf3856ad364e35_6.3.9600.16384_none_210fb36c397c4e2b\hvix64.exe
do not match actual file [l:20{10}]"hvix64.exe" :
  Found: {l:32 b:aR56zgntiLzVXFbmuZz7/YAqKimJJ8ztYR+kY/uDOiQ=} Expected: {l:32 b:2+jsu4cq379AWxcxWFWB4iAqAQzeE6iY8LD8jFZCYLQ=}
2014-04-08 20:38:47, Info                  CSI    000008a0 [SR] Could not reproject corrupted file [ml:520{260},l:46{23}]"\??\C:\Windows\System32"\[l:20{10}]"hvix64.exe"; source file in store is also corrupted
2014-04-08 20:38:48, Info                  CSI    000008a1 Hashes for file member \SystemRoot\WinSxS\amd64_microsoft-windows-e..dapplauncher-client_31bf3856ad364e35_6.3.9600.16441_none_38fd958247084804\WEMSAL_WmiProvider.dll
do not match actual file [l:44{22}]"WEMSAL_WmiProvider.dll" :
  Found: {l:32 b:pycCqcu4FlWSmwf1/XTmpfYCYDDjQqIz6bK4nfexBjE=} Expected: {l:32 b:3tsOAaD084bF+zL+5OFYLF7/QE3kk4zrL8OICJo8fKE=}
2014-04-08 20:38:48, Info                  CSI    000008a2 [SR] Cannot repair member file [l:44{22}]"WEMSAL_WmiProvider.dll" of Microsoft-Windows-Embedded-EmbeddedAppLauncher-Client, Version = 6.3.9600.16441,
pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-04-08 20:38:48, Info                  CSI    000008a3 [SR] This component was referenced by [l:160{80}]"Package_67_for_KB2887595~31bf3856ad364e35~amd64~~6.3.2.0.2887595-250_neutral_GDR"
2014-04-08 20:38:48, Info                  CSI    000008a4 Hashes for file member \??\C:\Windows\System32\wbem\WEMSAL_WmiProvider.dll do not match actual file [l:44{22}]"WEMSAL_WmiProvider.dll" :
  Found: {l:32 b:pycCqcu4FlWSmwf1/XTmpfYCYDDjQqIz6bK4nfexBjE=} Expected: {l:32 b:3tsOAaD084bF+zL+5OFYLF7/QE3kk4zrL8OICJo8fKE=}
2014-04-08 20:38:48, Info                  CSI    000008a5 Hashes for file member \SystemRoot\WinSxS\amd64_microsoft-windows-e..dapplauncher-client_31bf3856ad364e35_6.3.9600.16441_none_38fd958247084804\WEMSAL_WmiProvider.dll
do not match actual file [l:44{22}]"WEMSAL_WmiProvider.dll" :
  Found: {l:32 b:pycCqcu4FlWSmwf1/XTmpfYCYDDjQqIz6bK4nfexBjE=} Expected: {l:32 b:3tsOAaD084bF+zL+5OFYLF7/QE3kk4zrL8OICJo8fKE=}
2014-04-08 20:38:48, Info                  CSI    000008a6 [SR] Could not reproject corrupted file [ml:520{260},l:56{28}]"\??\C:\Windows\System32\wbem"\[l:44{22}]"WEMSAL_WmiProvider.dll"; source file in
store is also corrupted
2014-04-08 20:38:48, Info                  CSI    000008a7 Hashes for file member \SystemRoot\WinSxS\amd64_netwew00.inf_31bf3856ad364e35_6.3.9600.16384_none_252dacabb361a7e1\NETwew00.sys do not match actual
file [l:24{12}]"NETwew00.sys" :
  Found: {l:32 b:TMtOkmv4ue8781uyYPEIxz8FVFOYyoTz4kjBiGC02Sc=} Expected: {l:32 b:75xSkHd6Tid9R8h6F0/5RBviPK0vRW01uAhGMEH0Z1w=}
2014-04-08 20:38:48, Info                  CSI    000008a8 [SR] Cannot repair member file [l:24{12}]"NETwew00.sys" of netwew00.inf, Version = 6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture
neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-04-08 20:38:48, Info                  CSI    000008a9 [SR] This component was referenced by [l:200{100}]"Microsoft-Windows-Client-Drivers-Package-drivers~31bf3856ad364e35~amd64~~6.3.9600.16384.INF_netwew00"
2014-04-08 20:38:48, Info                  CSI    000008aa Hashes for file member \SystemRoot\WinSxS\amd64_prncacla.inf_31bf3856ad364e35_6.3.9600.16384_none_9590ba64d5b91f79\Amd64\CNBJ2530.DPB do not match
actual file [l:36{18}]"Amd64\CNBJ2530.DPB" :
  Found: {l:32 b:8LcvNZBm511T52GSwaqECOaQN2Pm60sxT+RHr6QZOGE=} Expected: {l:32 b:n520k714Uu3utHa5JGQ6HQYbZphKhlMWq5pEmfnCDuw=}
2014-04-08 20:38:48, Info                  CSI    000008ab [SR] Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version = 6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9),
Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-04-08 20:38:48, Info                  CSI    000008ac [SR] This component was referenced by [l:186{93}]"Microsoft-Windows-Printer-Drivers-Package~31bf3856ad364e35~amd64~~6.3.9600.16384.INF_prncacla"
2014-04-08 20:38:48, Info                  CSI    000008ad Hashes for file member \SystemRoot\WinSxS\amd64_wialx008.inf_31bf3856ad364e35_6.3.9600.16384_none_9ca3c194b95ed28c\LXAA3drs.dll do not match actual
file [l:24{12}]"LXAA3drs.dll" :
  Found: {l:32 b:kieFqZCqsO6AQQNNXtIYgybMJnJTkumPv2e2skhEfAg=} Expected: {l:32 b:dw8CQ+SfRzuBuXmiHYtZS1l3e+YdLVc3Enxt1FL6iog=}
2014-04-08 20:38:48, Info                  CSI    000008ae [SR] Cannot repair member file [l:24{12}]"LXAA3drs.dll" of wialx008.inf, Version = 6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture
neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-04-08 20:38:48, Info                  CSI    000008af [SR] This component was referenced by [l:204{102}]"Microsoft-Windows-Client-Drivers-Package-printscan~31bf3856ad364e35~amd64~~6.3.9600.16384.INF_wialx008"
2014-04-08 20:38:48, Info                  CSI    000008b0 Hashes for file member \SystemRoot\WinSxS\amd64_windows-defender-am-sigs_31bf3856ad364e35_6.3.9600.16384_none_ad431e16ef9845da\MpAvBase.vdm do
not match actual file [l:24{12}]"MpAvBase.vdm" :
  Found: {l:32 b:d2vTqbHW4/0bBDrraPL9EDQ3smJDUwd1CFbPSIBH1c8=} Expected: {l:32 b:0dMEhN7kYwcdydEE2kpJrc1jlT3hufXi/Vw24qdFm88=}
2014-04-08 20:38:48, Info                  CSI    000008b1 [SR] Cannot repair member file [l:24{12}]"MpAvBase.vdm" of Windows-Defender-AM-Sigs, Version = 6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64
(9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-04-08 20:38:48, Info                  CSI    000008b2 [SR] This component was referenced by [l:268{134}]"Windows-Defender-AM-Default-Definitions-Package~31bf3856ad364e35~amd64~~6.3.9600.16384.Windows-Defender-AM-Default-Definitions-Package"
2014-04-08 20:38:49, Info                  CSI    000008b3 Hashes for file member \??\C:\ProgramData\Microsoft\Windows Defender\Definition Updates\Default\MpAvBase.vdm do not match actual file [l:24{12}]"MpAvBase.vdm"
  Found: {l:32 b:d2vTqbHW4/0bBDrraPL9EDQ3smJDUwd1CFbPSIBH1c8=} Expected: {l:32 b:0dMEhN7kYwcdydEE2kpJrc1jlT3hufXi/Vw24qdFm88=}
2014-04-08 20:38:49, Info                  CSI    000008b4 Hashes for file member \SystemRoot\WinSxS\amd64_windows-defender-am-sigs_31bf3856ad364e35_6.3.9600.16384_none_ad431e16ef9845da\MpAvBase.vdm do
not match actual file [l:24{12}]"MpAvBase.vdm" :
  Found: {l:32 b:d2vTqbHW4/0bBDrraPL9EDQ3smJDUwd1CFbPSIBH1c8=} Expected: {l:32 b:0dMEhN7kYwcdydEE2kpJrc1jlT3hufXi/Vw24qdFm88=}
2014-04-08 20:38:49, Info                  CSI    000008b5 [SR] Could not reproject corrupted file [ml:520{260},l:144{72}]"\??\C:\ProgramData\Microsoft\Windows Defender\Definition Updates\Default"\[l:24{12}]"MpAvBase.vdm";
source file in store is also corrupted
2014-04-08 20:38:49, Info                  CSI    000008b6 [SR] Repair complete
2014-04-08 20:38:49, Info                  CSI    000008b7 [SR] Committing transaction
2014-04-08 20:38:49, Info                  CSI    000008b8 Creating NT transaction (seq 2), objectname [6]"(null)"
2014-04-08 20:38:49, Info                  CSI    000008b9 Created NT transaction (seq 2) result 0x00000000, handle @0xee0
2014-04-08 20:38:49, Info                  CSI    000008ba@2014/4/8:18:38:49.319 Beginning NT transaction commit...
2014-04-08 20:38:49, Info                  CSI    000008bb@2014/4/8:18:38:49.326 CSI perf trace:

Similar Messages

  • Unable to start any of the creative suite

    Got a odd problem with the creative suite 3 on some of our laptops.
    Basicly the install goes threw without any error or problems, but the user(s) are unable to start any of the software.
    When trying to start a program like as a example Adobe Photoshop CS 3 it either loads the window with grey background and directly to window not answering or nothing comes up and process shows up on task manager.
    Tested all of the software/programs included in the suite and all suffer from the same issue.
    Tested installing on a few laptops and only 1 of our models have the issue so probably a flaw in the image for that model, but how do i resolve this without remaking the image and reinstalling all the machines?

    The machines tho not cutting edge should run it without a problem (2,2ghz/3gb ram/ati hd3200).
    Doubt its a network/proxy issue since we have had them in use for a few months and its only the adobe suite having issues, and on the other machine models with same network config the adobe suite dosent have the same issue.
    Never got as far as accept the agreement or enter cd-key so looks like its the accept agreement window not popping up that stalls evrything, but there is no error entry or any sign of a window/process for the agreement window at all.
    Should be possible to remove the need for the window in registry, but as to what values ive had no luck sofar.
    Havent had any luck on google to find the registry values or a contanct mail/form for adobe technical support either.

  • After Lion upgrade, unable to start any 3rd-party apps. Suspect it has something to do with the cache and permissions.

    Dear Apple Support Community,
    I am using a MacBook 15" (mid-2010) with Intel i7 2.66GHz.
    Currently, I write to you via my sister's laptop as mine is unable to start-up Safari or any other web browser at the moment.
    After a relatively smooth OS installation of OS X Lion, I noticed that my usual apps, Evernote, Twitter, Skype, and others, were not able to start-up at all (i.e. kept bouncing in place on the dock for what seemed like forever). I have since disabled their 'Open at Login' command and now start my MacBook up with no apps running. After restarting my computer countless times, I've realised that only selected native applications are able to open. Finder, Safari, App Store, iTunes, FaceTIme and most of the Utilities. Even on Finder, right-clicking is apparent blasphemy as the window freezes and the windmill pops up, and I am forced to relaunch Finder. Safari is only able to load simple web pages such as Google.
    I have attached an excerpt of my Console for you guys (I could take a screenshot but dropbox could not even open to allow me to send it to my sister's laptop). As you can see, at every refresh, the same 5 messages appear, that a particular 'com.apple.launchd.peruser.501' keeps crashing. Correct me if I'm mistaken but this is probably the process handle for Launchpad. Although I am not sure whether this is the only reason for my computer's sluggishness post-Lion update, I would really like to eliminate this possibility.
    Things I have tried:
    Repairing Disk Permissions
    Unfortunately, this yielded no positive results as it did not seem to rectify the problem. Subsequent reparations have produced the same log, hence I don't think it's working.
    Waiting for Indexing to complete
    Some people have cited that the reason behind the sluggishness could be due to the fact that Spotlight was indexing my hard drive for optimal search results. I have since waited 7 hours for the indexing to complete, but am still stuck with a computer that cannot even open Twitter.
    Installing Onyx
    Other forum users have said that it is possible that the computer's cache has been clogged up or something. I am not entirely sure what this means but I went to attempt to download the free product that most people have recommended. Although installation was a cinch, I was not able to even start Onyx. After 10 minutes, Lion just told me that the program had been unresponsive for too long and asked me whether I wished to kill it.
    I am almost certain that the overarching problem could be erroneous sharing permissions. But then again, that is no reason for my computer to behave in such a snail-like manner. I would really appreciate if you guys could provide me with some sudo commands to use in the terminal or something that can fix the problems my computer is facing, after understanding the limitations that I currently face considering the state of my MacBook.
    The fact that I am writing here on this forum is that I wish to do anything other than a full reinstallation of the OS that has caused me so much anxiety (Snow Leopard was just magical compared to this pile of sh*t, pardon my language). I just want to do everything I can before having to resort to such a barbaric act (I have a lot of applications but I don't know whether I am able to restore those using Time Machine as well).
    In any case, thank you guys so much for reading all the way to the end. Help of any sort, be it sincere or condescending, will be fully appreciated. Please don't hesitate to ask for more information if I have not already provided it. As I am an average user, I may not be too familiar with jargon. So if getting the information requires complicated procedures, please provide a step-by-step.
    Also, tl;dr: Updated from Snow Leopard to Lion, computer became slow and buggy, tried many things, didn't work, need help.
    Thanks,
    Nathan

    Thanks for the quick advice!
    Unfortunately, I am still unable to open my core productivity apps, namely Skype and Evernote. Twitter, as well, could not start. But interesting quick fix though, I never knew you could do that.
    Here's the error log after the restart:
    What else should I try?

  • OracleCSService unable to start on win2003 node after patching to 10.2.0.4

    Hi,
    Anyone facing problem starting the CS service after patching to 10.2.0.4 on 1 win2003 node while other win2003 node works fine?
    Well seems I found the solution to it. Pl read on if u r facing same problem:
    1. on the non-working node goto the log folders inside "$ORACLE_HOME/log/<node1name>/css/cssdout.log"
    2. if u see any errors like ssmain_run_css going into looping then
    3. from cmd run "crsctl check boot"
    4. check any dll error reporting...(in my case it was orahasgen10.dll)
    5. compare this dll size/date with the one on working node.
    6. If its different copy same dll from workingnode to non-working node.
    7. try restart oraclecsservice. It should start now.
    Hope this helps. I spent a lot of time researching this so hope someone benefits from this.
    Rgds,
    Mounesh.

    Just wanted to help techies out there if facing cs service issue.

  • Unable to locate any old files after putting in hard drive enclosure

    Hello,
    I dropped my old macbook over the weekend. When I took it the Genius Bar, the tech said the hard drive looked fine (or didn't detect any issues) and recommended using an enclosure to recovery my file.
    So after getting the correct one, a rocketfish 2.5 SATA, hooking it up to my imac in attempt to recover files, i see the folder named applications, etc, and i see a user folder, and withint the user folder, a folder with my user name, but it's completely empty! the folder named Shared is also empty. Absolutely nothing this there.
    I've looked in lots of places where my files, such as excel, itunes music, word docs, etc might be....but have no luck.
    worse yet, it seems that now my imac isn't even reading the enclosure with the old hd!
    Thoughts regarding the missing files? Am i missing something? Could someone theoretically have "copied" the files from the old hard drive if i was not looking?? Thanks in advance!!

    Thanks BGreg,
    I dropped my old macbook over the weekend. it accidentally fell from my bed onto hardwood floor. and when i picked it up- the screen basically looked very distorted and unrecognizable. although you could not see any physical cracks whatsoever after i turned it off/trying to reboot, when i tried to turn it back on, you could hear it try to boot up (the start up sound, no problems). but the screen look like a cross between kalediscope and a inkblot test. So i took it to the genius bar to see what could be done and how much it would cost to replace the screen, and it wasn't actually too bad ~$250+. but since it was a bit older and i have my imac anyhow, i declined the replacement. He ran some other diagnostics and didn't detect any problems with the hard drive. He said though that even with the replacement of the screen, there is no guarantee that there aren't other problems elsewhere. When I asked how i can recover the files, the tech from the genius indicated they couldn't do data/file recovery but recommended getting an enclosure instead to transfer to my imac. (OS x10.5.8).
    So i went and got the correct enclosure (rocketfish), put the old hard drive from the macbook it in....I have so far only been able to have my imac to read the folders listed above once. The applications etc were there but none of my files existed. I did not have any problems with the hard drive prior to the fall. It just seems so strange that applications would be there, but not my files!
    Now-my imac is not even reading the enclosue at all!
    thanks again

  • PLEASE HELP! Unable to render any Quicktime format - after effects error unable to open file (-1610153459)

    I just can't render any type of Quicktime file in AE CC 2014. I'm on Windows 8.1.
    Even in CS6 was it not possible, but I never really used any Quicktime filetypes.
    Normally I just rendered to .h264, but now that's only available via the insane slow Adobe Media Encoder, I want to use the Quicktime -> h.264 option, but it's just not possible.
    I also want to render some footage to the Avid DNxHD codec, but this is also not possible.
    Doesn't matter what type of footage, dslr footage, pictures, AE solids. Everytime I want to render in a Quicktime file I get this error:
    AE error: Rendering error while writing to file (File-Location). Unable to open file. (-1610153459)
    Installed the latest Windows version of Quicktime, didn't help...
    I saw some topics about this, but they didn't provide a good solution. All they discussed was the hardware of the computer. I have enough space available and render to a NTFS drive.
    Please can someone help me with this!

    Yes! I just solved my own problem. I still think that the internet doesn't provide an easy to find answer, so I will post this.
    I had the latest version of Quicktime, but this version causes the problem. After some searching I finally found a page on the Apple website that confirms this.
    Updating to QuickTime 7.4 may cause issues while rendering footage in Adobe After Effects - Apple Support
    So I uninstalled my latest version of Quicktime and installed version 7.4.1. Everything works now the way it's supposed to!

  • Unable to start app on HCP after deployment

    Hi,
    After a successful deployment on the cloud our java webapp is not starting and shows the below exception:
    Log
    CDI Beans module deployment failedjavax.enterprise.event.ObserverException: Caught Exception while handling event object with type : org.apache.webbeans.portable.events.discovery.AfterBeanDiscoveryImpl
      at org.apache.webbeans.event.NotificationManager.fireEvent(NotificationManager.java:443)
      at org.apache.webbeans.container.BeanManagerImpl.fireEvent(BeanManagerImpl.java:484)
      at org.apache.openejb.cdi.BeansDeployer.fireAfterBeanDiscoveryEvent(BeansDeployer.java:158)
      at org.apache.openejb.cdi.OpenEJBLifecycle.startApplication(OpenEJBLifecycle.java:274)
      at org.apache.openejb.cdi.ThreadSingletonServiceImpl.initialize(ThreadSingletonServiceImpl.java:167)
      at org.apache.openejb.cdi.CdiBuilder.build(CdiBuilder.java:43)
      at org.apache.openejb.assembler.classic.Assembler.createApplication(Assembler.java:723)
      at org.apache.openejb.assembler.classic.Assembler.createApplication(Assembler.java:546)
      at org.apache.openejb.assembler.classic.Assembler.createApplication(Assembler.java:542)
      at org.eclipse.virgo.web.enterprise.openejb.deployer.VirgoDeployerEjb.deploy(VirgoDeployerEjb.java:180)
      at org.eclipse.virgo.web.enterprise.applistener.internal.OpenEjbApplicationListener.deploy(OpenEjbApplicationListener.java:41)
      at org.eclipse.virgo.web.enterprise.applistener.internal.OpenEjbApplicationListener.lifecycleEvent(OpenEjbApplicationListener.java:98)
      at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:117)
      at org.apache.catalina.util.LifecycleBase.fireLifecycleEvent(LifecycleBase.java:90)
      at org.apache.catalina.core.StandardContext.startInternal(StandardContext.java:5355)
      at org.apache.catalina.util.LifecycleBase.start(LifecycleBase.java:150)
      at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:901)
      at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:877)
      at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:632)
      at org.eclipse.gemini.web.tomcat.internal.TomcatServletContainer.startWebApplication(TomcatServletContainer.java:125)
      at org.eclipse.gemini.web.internal.StandardWebApplication.start(StandardWebApplication.java:109)
      at org.eclipse.gemini.web.extender.WebContainerBundleCustomizer.addingBundle(WebContainerBundleCustomizer.java:49)
      at org.osgi.util.tracker.BundleTracker$Tracked.customizerAdding(BundleTracker.java:467)
      at org.osgi.util.tracker.BundleTracker$Tracked.customizerAdding(BundleTracker.java:1)
      at org.osgi.util.tracker.AbstractTracked.trackAdding(AbstractTracked.java:256)
      at org.osgi.util.tracker.AbstractTracked.track(AbstractTracked.java:229)
      at org.osgi.util.tracker.BundleTracker$Tracked.bundleChanged(BundleTracker.java:443)
      at org.eclipse.osgi.framework.internal.core.BundleContextImpl.dispatchEvent(BundleContextImpl.java:847)
      at org.eclipse.osgi.framework.eventmgr.EventManager.dispatchEvent(EventManager.java:230)
      at org.eclipse.osgi.framework.eventmgr.ListenerQueue.dispatchEventSynchronous(ListenerQueue.java:148)
      at org.eclipse.osgi.framework.internal.core.Framework.publishBundleEventPrivileged(Framework.java:1568)
      at org.eclipse.osgi.framework.internal.core.Framework.publishBundleEvent(Framework.java:1504)
      at org.eclipse.osgi.framework.internal.core.Framework.publishBundleEvent(Framework.java:1499)
      at org.eclipse.osgi.framework.internal.core.BundleHost.startWorker(BundleHost.java:391)
      at org.eclipse.osgi.framework.internal.core.AbstractBundle.start(AbstractBundle.java:300)
      at org.eclipse.osgi.framework.internal.core.AbstractBundle.start(AbstractBundle.java:292)
      at org.eclipse.virgo.web.war.deployer.WARDeployer.start(WARDeployer.java:780)
      at org.eclipse.virgo.nano.deployer.internal.StandardApplicationDeployer.startDeployables(StandardApplicationDeployer.java:324)
      at org.eclipse.virgo.nano.deployer.internal.StandardApplicationDeployer.bulkDeploy(StandardApplicationDeployer.java:115)
      at org.eclipse.virgo.nano.deployer.hot.HotDeploymentFileSystemListener.bulkDeployIfNotDeployed(HotDeployerFileSystemListener.java:143)
      at org.eclipse.virgo.nano.deployer.hot.HotDeploymentFileSystemListener.onInitialEvent(HotDeployerFileSystemListener.java:105)
      at org.eclipse.virgo.util.io.FileSystemChecker.notifyListenersOnInitialEvent(FileSystemChecker.java:207)
      at org.eclipse.virgo.util.io.FileSystemChecker.handleInitialFiles(FileSystemChecker.java:177)
      at org.eclipse.virgo.util.io.FileSystemChecker.check(FileSystemChecker.java:261)
      at org.eclipse.virgo.nano.deployer.hot.WatchTask.run(WatchTask.java:48)
      at java.lang.Thread.run(Thread.java:789)
    Caused by: org.apache.webbeans.exception.WebBeansException: java.lang.reflect.InvocationTargetException
      at org.apache.webbeans.event.ObserverMethodImpl.notify(ObserverMethodImpl.java:301)
      at org.apache.webbeans.event.NotificationManager.fireEvent(NotificationManager.java:429)
      ... 45 common frames omitted
    Caused by: java.lang.reflect.InvocationTargetException: null
      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
      at java.lang.reflect.Method.invoke(Method.java:601)
      at org.apache.webbeans.event.ObserverMethodImpl.notify(ObserverMethodImpl.java:295)
      ... 46 common frames omitted
    Caused by: java.lang.NoSuchMethodError: javassist.util.proxy.RuntimeSupport.find2Methods(Ljava/lang/Class;Ljava/lang/String;Ljava/lang/String;ILjava/lang/String;[Ljava/lang/reflect/Method;)V
      at org.springframework.data.jpa.repository.cdi.JpaRepositoryExtension_$$_javassist_0.<clinit>(JpaRepositoryExtension_$$_javassist_0.java)
      at sun.misc.Unsafe.ensureClassInitialized(Native Method)
      at sun.reflect.UnsafeFieldAccessorFactory.newFieldAccessor(UnsafeFieldAccessorFactory.java:43)
      at sun.reflect.ReflectionFactory.newFieldAccessor(ReflectionFactory.java:140)
      at java.lang.reflect.Field.acquireFieldAccessor(Field.java:949)
      at java.lang.reflect.Field.getFieldAccessor(Field.java:930)
      at java.lang.reflect.Field.set(Field.java:680)
      at javassist.util.proxy.ProxyFactory.setField(ProxyFactory.java:525)
      at javassist.util.proxy.ProxyFactory.createClass3(ProxyFactory.java:508)
      at javassist.util.proxy.ProxyFactory.createClass2(ProxyFactory.java:492)
      at javassist.util.proxy.ProxyFactory.createClass1(ProxyFactory.java:428)
      at javassist.util.proxy.ProxyFactory.createClass(ProxyFactory.java:400)
      at org.apache.webbeans.proxy.javassist.JavassistFactory.doPrivilegedCreateClass(JavassistFactory.java:87)
      at org.apache.webbeans.proxy.javassist.JavassistFactory.getProxyClass(JavassistFactory.java:55)
      at org.apache.webbeans.proxy.javassist.JavassistFactory.getProxyClass(JavassistFactory.java:47)
      at org.apache.webbeans.proxy.ProxyFactory.createProxyClass(ProxyFactory.java:431)
      at org.apache.webbeans.proxy.ProxyFactory.createNormalScopedBeanProxy(ProxyFactory.java:216)
      at org.apache.webbeans.container.BeanManagerImpl.getReference(BeanManagerImpl.java:850)
      at org.apache.webbeans.event.ObserverMethodImpl.notify(ObserverMethodImpl.java:289)
      at org.apache.webbeans.event.NotificationManager.fireEvent(NotificationManager.java:429)
      at org.apache.webbeans.container.BeanManagerImpl.fireEvent(BeanManagerImpl.java:484)
      at org.apache.webbeans.portable.events.discovery.AfterBeanDiscoveryImpl.addBean(AfterBeanDiscoveryImpl.java:75)
      at com.sun.jersey.server.impl.cdi.CDIExtension.addPredefinedContextBeans(CDIExtension.java:823)
      at com.sun.jersey.server.impl.cdi.CDIExtension.afterBeanDiscovery(CDIExtension.java:761)
      ... 51 common frames omitted
    The same project used to work a 2 weeks back, but now it shows this exception and fails to start. More precisely, the app will be in "Starting" mode for a while and then shows "Infrastructure Error".
    Have attached the complete log

    Hi Bhuvan,
    Is there a chance that you've run the app on neo-sdk-javaweb (version 1.x) two weeks ago?
    Do you use J2EE functionality in your app? In neo-sdk-javaee6 2.x there's already javassist packed in the runtime and bringing another javassist with the application may cause problems since the runtime may start using the app version.
    You may try removing the 3.16.1-GA library in case you need to run it on 2.x. Or try running it on 1.x if you don't need any J2EE functionality.
    Kind regards,
    Katya

  • Unable to start the Weblogic Server after installing OFM SOA suite

    Hi All,
    As part of Oracle Fusion Middleware installation, i installed the SOA suite and tried to start the AdminServer configured for the SOA domain. But the server was forced shutdown due to the following error messages. (Windows 7 is my OS). Please help me to resolve this issue.
    <AdminServer2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>>
    <> <> <1265344200947> *<BEA-090870> <The realm "myrealm" failed to be loaded: weblogic.security.service.SecurityServiceException:*
    com.bea.common.engine.ServiceInitializationException: weblogic.security.spi.ProviderInitializationException: A failure occurred attempting to load
    LDIF for provider Authorizer from file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\XACMLAuthorizerInit.ldift..
    weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException:
    weblogic.security.spi.ProviderInitializationException: A failure occurred attempting to load LDIF for provider
    Authorizer from file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\XACMLAuthorizerInit.ldift.
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:465)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:840)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(CommonSecurityServiceManagerDelegateImpl.java:869)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1028)
         at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
         at weblogic.security.SecurityService.start(SecurityService.java:141)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused By: <openjpa-1.1.1-SNAPSHOT-r422266:807362 nonfatal store error> kodo.jdo.DataStoreException: ORA-00942: table or view does not exist
    {prepstmnt 2428110 *INSERT INTO BEAXACMLAP (DOMN, REALMN, TYPEN, CN, XVER, CTS, WCN, WCI, WXF, XD, XS, MTS)* VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?) [params=(String) soa_domain, (String) myrealm, (String) Policies, (String) urn:bea:xacml:2.0:entitlement:resource:type@E@Fjms@G, (String) 1.0, (null) null, (null) null, (null) null, (Blob) oracle.sql.BLOB@e26d2e, (InputStream) java.io.ByteArrayInputStream@16e1ccd, (String) 3, (Timestamp) 2010-02-04 22:30:00.824] [reused=0]} [code=942, state=42000]
    FailedObject: [email protected]3c
         at org.apache.openjpa.jdbc.sql.DBDictionary.narrow(DBDictionary.java:4207)
         at org.apache.openjpa.jdbc.sql.DBDictionary.newStoreException(DBDictionary.java:4171)
         at org.apache.openjpa.jdbc.sql.SQLExceptions.getStore(SQLExceptions.java:102)
         at org.apache.openjpa.jdbc.sql.SQLExceptions.getStore(SQLExceptions.java:72)
    'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1265344200971> *<BEA-090082> <Security initializing using security realm myrealm.>*
    ####<Feb 4, 2010 10:30:00 PM CST> <Critical> <WebLogicServer> < > <AdminServer2> <main> <<WLS Kernel>> <> <> <1265344200974> <BEA-000362> <Server failed. Reason:
    There are 1 nested errors:
    weblogic.security.service.SecurityServiceRuntimeException: [Security:090399]Security Services Unavailable
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:916)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
         at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
         at weblogic.security.SecurityService.start(SecurityService.java:141)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

    Dear Bhushan
    The root cause is this Error Stack Trace:
    Caused By: <openjpa-1.1.1-SNAPSHOT-r422266:807362 nonfatal store error> kodo.jdo.DataStoreException: ORA-00942: table or view does not exist
    {prepstmnt 2428110 INSERT INTO BEAXACMLAP (DOMN, REALMN, TYPEN, CN, XVER, CTS, WCN, WCI, WXF, XD, XS, MTS) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?) [params=(String) soa_domain, (String) myrealm, (String) Policies, (String) urn:bea:xacml:2.0:entitlement:resource:type@E@Fjms@G, (String) 1.0, (null) null, (null) null, (null) null, (Blob) oracle.sql.BLOB@e26d2e, (InputStream) java.io.ByteArrayInputStream@16e1ccd, (String) 3, (Timestamp) 2010-02-04 22:30:00.824] [reused=0]} [code=942, state=42000]
    Means, it is NOT able to find any DB Schema with the Table named like "BEAXACMLAP"...
    When we create a new domain using Config wizard, you select customize option and in one of the following screens you will see like 2 Radio buttons with options as " I do not want to change anything here" and " I want to create, change or remvoe RDMBS support". NOW use the Default setting like I do not want to change. Once I checked other radio button and ran into issues like yours. Basically if you check, YES, then you need to load another .sql file in this db schema located at: "C:\beawls1032\wlserver_10.3\server\lib\rdbms_security_store_oracle.sql". This .sql file has the above missing table "BEAXACMLAP".
    So I guess all you folks may have checked the radio button option YES, but did not run the above .sql file in that db. Under your domain root folder/config/jdbc you should see a .xml file with above datasource details. So run the above .sql file in that schema.
    I would say please start over again. Create a new domain from config wizard and use default setting for above screen that I mentiond like " I do not want to change anything here" and proceed. I am hoping that should work.
    NOTE: Running RCU utility or RCU related .sql files will NOT have above missing tables. RCU Utility will have all schemas/tables specific to SOA Components only like BPEL, WebServices, Workflows etc etc.
    Thanks
    Ravi Jegga

  • [Solved] Not able to start any GUI application after a while

    Hi,
    I have this crazy issue which never happened before,
    [ssss@localhost]$ opera
    No protocol specified
    opera: cannot connect to X server :0. Error: Resource temporarily unavailable
    [ssss@localhost]$ firefox
    No protocol specified
    No protocol specified
    Error: cannot open display: :0
    [ssss@localhost]$ chromium
    No protocol specified
    (chromium:2576): Gtk-WARNING **: cannot open display: :0
    [ssss@localhost]$ terminator
    No protocol specified
    /usr/lib/python2.7/site-packages/gtk-2.0/gtk/__init__.py:57: GtkWarning: could not open display
    warnings.warn(str(e), _gtk.Warning)
    You need to run terminator in an X environment. Make sure $DISPLAY is properly set
    [ssss@localhost]$ claws-mail
    No protocol specified
    (claws-mail:2592): Gtk-WARNING **: cannot open display: :0
    Now I'm currently on firefox and the graphical programs which I opened before they work as they should but I cannot open a new one, and if I close the open they are not able to connect to X.
    sssss   1529  0.0  0.0  15872   880 tty1     S+   20:27   0:00 xinit /home/sssss/.xinitrc -- /etc/X11/xinit/xserverrc :0 -auth /tmp/serverauth.tuHk8KdrmB
    a bit from my tail -f  (currently)
    $ tail -f /var/log/Xorg.0.log
    [ 24.198] (**) HP WMI hotkeys: always reports core events
    [ 24.198] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event7"
    [ 24.198] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
    [ 24.198] (--) evdev: HP WMI hotkeys: Found keys
    [ 24.198] (II) evdev: HP WMI hotkeys: Configuring as keyboard
    [ 24.198] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event7"
    [ 24.198] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 13)
    [ 24.198] (**) Option "xkb_rules" "evdev"
    [ 24.199] (**) Option "xkb_model" "hpzt11xx"
    From pstree -ap
    |-gvfsd-trash,1798 --spawner :1.4 /org/gtk/gvfs/exec_spaw/0
    | `-startx,1512 /usr/bin/startx
    | `-xinit,1529 /home/sssss/.xinitrc -- /etc/X11/xinit/xserverrc :0 -auth /tmp/serverauth.tuHk8KdrmB
    | |-.xinitrc,1534 /home/sssss/.xinitrc
    | | |-.xinitrc,1552 /home/sssss/.xinitrc
    | | |-lxpanel,1551
    | | | `-{lxpanel},1642
    | | |-openbox,1545 --startup /usr/lib/openbox/openbox-autostart OPENBOX
    | | `-qxkb,1549
    | | `-{qxkb},1561
    after restart I see however :
      |               `-X,1543 -nolisten tcp :0 -auth /tmp/serverauth.4nwwrf1wMz vt1
    until it goes way again.
    Any idea of what is happening or how to sovle this?
    Last edited by r0b0t (2012-11-24 02:29:39)

    moetunes wrote:
    I asked about localhost in your PS1 because you show localhost in your PS1
    r0b0t wrote:[ssss@localhost]$ opera
    Is localhost the hostname for that computer?
    If you aren't trying to open applications over the network and $DISPLAY is always :0 it is a strange problem for sure.
    yes it's localhost
    $ cat /etc/hostname
    localhost
    and no, I just open the applications normally as always did before without any problem, is it as after some "thing" happens the applications cannot detect any X server running but the X is indeed running.
    I notice however that I'm on tty1 with the graphic, and normally I remember running on tty7 , maybe have something to do with it?

  • Unable to install any android apps after upgrading to 10.3

    Hello All,
    Yesterday I updated my BB Z10 to 10.3.1.1865 software release and now I am not able to install any Android Apps on my Z10. I get a message as "You dont have enough Storage space available to install this app". Even a smaller app is not getting installed. I have 10 GB space on Device. Please help.

    I have the same problem, if you tap denie in the app permision, it says that installed, but if you tap open goes to app permision again, tap accept but it will quit, THIS IS NOT A SOLUTION, JUST My PROBLEM

  • Won't start in Windows XP after forced shutdown.

    Other than the above question, There's nothing I know to add.
    Ignore the OS & memory below in The troubleshooting info & the educated guesses: It is Windows XP Pro & memory is 1.5 GB. Version is the same 10.0.2 Extensions may be the same, for the most part.

    I think problem is dead. Close it & unsubscribe?

  • Unable to start Soa Suite after applying 10.1.3.4 MLR#8

    Hi
    We are trying to install AIA2.5 on 10.1.3.4 windows machine.We are unable to start the soa suite after applying 10.1.3.4 MLR#8. Following is the error we are getting while starting the soa suite.Kindly help.
    OC4J startup failed
    oracle.classloader.util.AnnotatedNoClassDefFoundError:
         Missing class: oracle.xml.jaxb.JaxbNode
         Dependent class: oracle.security.wss.config.AttributeConfigTypeImpl
         Loader: oracle.ws.security:10.1.3
         Code-Source: /D:/product/10.1.3.1/OracleAS_1/webservices/lib/wssecurity.jar
         Configuration: <code-source> (ignore manifest Class-Path) in META-INF/boot.xml in D:\product\10.1.3.1\OracleAS_1\j2ee\home\oc4j.jar
    The missing class is not available from any code-source or loader in the system.
         at oracle.classloader.PolicyClassLoader.defineClass(PolicyClassLoader.java:2264)
         at oracle.classloader.PolicyClassLoader.bulkLoadClasses(PolicyClassLoader.java:1538)
         at oracle.classloader.util.XMLConfiguration.bulkLoadClasses(XMLConfiguration.java:885)
         at oracle.classloader.util.XMLConfiguration.access$100(XMLConfiguration.java:41)
         at oracle.classloader.util.XMLConfiguration$Externals.load(XMLConfiguration.java:871)
         at oracle.classloader.util.XMLConfiguration.endElement(XMLConfiguration.java:685)
         at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.endElement(AbstractSAXParser.java:601)
         at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanEndElement(XMLDocumentFragmentScannerImpl.java:1774)
         at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDriver.next(XMLDocumentFragmentScannerImpl.java:2930)
         at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(XMLDocumentScannerImpl.java:648)
         at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDocumentFragmentScannerImpl.java:510)
         at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:807)
         at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:737)
         at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:107)
         at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(AbstractSAXParser.java:1205)
         at com.sun.org.apache.xerces.internal.jaxp.SAXParserImpl$JAXPSAXParser.parse(SAXParserImpl.java:522)
         at oracle.classloader.util.XMLConfiguration.configureLoaders(XMLConfiguration.java:277)
         at oracle.classloader.util.InitialLoadersFactory.populateLoaders(InitialLoadersFactory.java:389)
         at oracle.classloader.util.InitialLoadersFactory.initLoaders(InitialLoadersFactory.java:230)
         at oracle.classloader.util.InitialLoadersFactory.create(InitialLoadersFactory.java:167)
         at oracle.oc4j.loader.boot.BootStrap.main(BootStrap.java:26)
    Warning: The flag AppendRatio=3 has been EOL'd as of 6.0_10 and will be ignored

    Hi,
    I have a similar problem where the error is:
    Dependent class: oracle.security.wss.WSSecurity
         Loader: oracle.ws.security:10.1.3
         Code-Source: /E:/jdeveloper/webservices/lib/wssecurity.jar
         Configuration: <code-source> (ignore manifest Class-Path) in META-INF/boot.xml in E:\jdeveloper\j2ee\home\oc4j.jar
    This load was initiated at oracle.ws.security:10.1.3 using the Class.forName() method.
    The missing class is available from the following locations:
    I'm working with JDeveloper 10.1.3.4

  • HT201413 Unable to start my itune

    My Apple ID has been disable ?

    Pratik Nayak wrote:
    Unable to start my Ipad 2 after upgrading to Ios 7.04 .
    First try a Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
    If no joy... Try a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414
    3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
    Note on Recovery Mode.
    You may need to try this More than Once... Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • How do I retain my apps after I change my apple ID? Right now I'm unable to update any of the apps with the old apple ID. I get an error message about an invalid id or password. If I delete my apps and start over, I may lose the apps that I purchased...

    How do I retain my apps after I change my apple ID? Right now I'm unable to update any of the apps with the old apple ID. I get an error message about an invalid id or Password. If I delete my appos and start over, I may lose the apps that I purchased (like the ones for $5 +....

    Apps are always tied to the ID that was used to purchase them originally. Did you try entering your old password and see if that works?
    If you need to sign out of your old account go to Settings>Store>Tap on your ID and sign out. Sign in with the new one.
    you can also access your ID in the featured tab of the App Store. Swipe to the bottom of the screen and you will find it there as well.

  • Unable to start the Managed servers OIM and SOA after starting the Weblogic

    Hi,
    We are unable to start the any manager servers after starting the weblogic Admin Server.
    We are getting the below error after trying to start the OIM or SOA managed servers.
    Error: Exception thrown by the agent : java.rmi.server.ExportException: Port already in use: 5555; nested exception is:
         java.net.BindException: Address already in use
    We have also cross verified that the port 5555 is listening after starting the weblogic Admin server.
    Please help us to start the managed servers in the weblogic 10.3.5.
    Thanks.

    We are getting the below errors after starting the Admin server and Managed servers.
    Admin Server:
    <Jan 11, 2012 7:15:06 AM EST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
    <Jan 11, 2012 7:16:02 AM EST> <Error> <org.apache.beehive.netui.pageflow.internal.AdapterManager> <BEA-000000> <ServletContainerAdapter manager not initialized correctly.>
    Managed Server:
    Starting WLS with line:
    /opt/jdk1.6.0_27/bin/java -client -Xms1024m -Xmx4096m -XX:PermSize=512m -XX:MaxPermSize=1024m -Dweblogic.Name=oim_server1 -Djava.security.policy=/ama/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.policy -Dweblogic.security.SSL.trustedCAKeyStore=/ama/Oracle/Middleware/wlserver_10.3/server/lib/cacerts -Xverify:none -da -Dplatform.home=/ama/Oracle/Middleware/wlserver_10.3 -Dwls.home=/ama/Oracle/Middleware/wlserver_10.3/server -Dweblogic.home=/ama/Oracle/Middleware/wlserver_10.3/server -Dcommon.components.home=/ama/Oracle/Middleware/oracle_common -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=/ama/Oracle/Middleware/user_projects/domains/base_domain -Djrockit.optfile=/ama/Oracle/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrocket_optfile.txt -Doracle.server.config.dir=/ama/Oracle/Middleware/user_projects/domains/base_domain/config/fmwconfig/servers/oim_server1 -Doracle.domain.config.dir=/ama/Oracle/Middleware/user_projects/domains/base_domain/config/fmwconfig -Digf.arisidbeans.carmlloc=/ama/Oracle/Middleware/user_projects/domains/base_domain/config/fmwconfig/carml -Digf.arisidstack.home=/ama/Oracle/Middleware/user_projects/domains/base_domain/config/fmwconfig/arisidprovider -Doracle.security.jps.config=/ama/Oracle/Middleware/user_projects/domains/base_domain/config/fmwconfig/jps-config.xml -Doracle.deployed.app.dir=/ama/Oracle/Middleware/user_projects/domains/base_domain/servers/oim_server1/tmp/_WL_user -Doracle.deployed.app.ext=/- -Dweblogic.alternateTypesDirectory=/ama/Oracle/Middleware/Oracle_IDM1/server/loginmodule/wls,/ama/Oracle/Middleware/oracle_common/modules/oracle.ossoiap_11.1.1,/ama/Oracle/Middleware/oracle_common/modules/oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol|oracle.fabric.common.classloaderurl.handler|oracle.fabric.common.uddiurl.handler|oracle.bpm.io.fs.protocol -Dweblogic.jdbc.remoteEnabled=false -DXL.HomeDir=/ama/Oracle/Middleware/Oracle_IDM1/server -Djava.security.auth.login.config=/ama/Oracle/Middleware/Oracle_IDM1/server/config/authwl.conf -Dorg.owasp.esapi.resources=/ama/Oracle/Middleware/Oracle_IDM1/server/apps/oim.ear/APP-INF/classes -da:org.apache.xmlbeans... -Dsoa.archives.dir=/ama/Oracle/Middleware/Oracle_SOA1/soa -Dsoa.oracle.home=/ama/Oracle/Middleware/Oracle_SOA1 -Dsoa.instance.home=/ama/Oracle/Middleware/user_projects/domains/base_domain -Dtangosol.coherence.clusteraddress=227.7.7.9 -Dtangosol.coherence.clusterport=9778 -Dtangosol.coherence.log=jdk -Djavax.xml.soap.MessageFactory=oracle.j2ee.ws.saaj.soap.MessageFactoryImpl -Dweblogic.transaction.blocking.commit=true -Dweblogic.transaction.blocking.rollback=true -Djavax.net.ssl.trustStore=/ama/Oracle/Middleware/wlserver_10.3/server/lib/DemoTrust.jks -Dem.oracle.home=/ama/Oracle/Middleware/oracle_common -Djava.awt.headless=true -Dums.oracle.home=/ama/Oracle/Middleware/Oracle_SOA1 -Dweblogic.management.discover=false -Dweblogic.management.server=http://127.0.0.1:7001 -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false -Dweblogic.ext.dirs=/ama/Oracle/Middleware/patch_wls1035/profiles/default/sysext_manifest_classpath:/ama/Oracle/Middleware/patch_ocp360/profiles/default/sysext_manifest_classpath weblogic.Server
    Error: Exception thrown by the agent : java.rmi.server.ExportException: Port already in use: 5555; nested exception is:
         java.net.BindException: Address already in use
    We have to find out why the port 5555 is in listening mode after starting the Admin server.

Maybe you are looking for

  • How do i find difference of data between 2 tables & insert a flag based on

    I got a situation like. My application is connecting to different database and getting data to our schema using dblink.That data is stored into a temporary table.Every day a nightly job is executed and stores the latest data into temp table .we compa

  • Keynote - no sound when I play and interactive quicktime presentation

    Hello Everyone, I have a problem that maybe someone can help me with. I have made a keynote presentation and have added some quicktime movies with sound inside the presentation. When I veiw the presentation out of keynote everything - presentation, m

  • No mapping found for '

    Hi, I am using JDeveloper 9.0.3.11.18(Build 1247) for WS. We have generated a stub from our web services. Generation and compilation is not a problem. I have tested the web service from the end point, its working properly. When I am calling the stub

  • IPhoto slideshow, remove some photos

    I've created an elaborate iPhoto slideshow that looks fantastic (custom settings for nearly every slide).  QUESTION:  I'd like to make a DIFFERENT slideshow by removing a few slides from my origonal 'fantastic' slideshow while keeping the origonal on

  • End of Call

    This is a real basic script I set up to prove the concept of sending data via HTTP Post for an after call survey. It works fine but I am hung up trying to get the HTTP Post to go after the call is complete. The script as you see it send the data upon