Unable to start APPS after R12 installation. But, DB is UP

Hi,
I have installed R12 on my laptop with External Hard drive connected. The installation completed successfully. I can connect to the DB tier. But, apps... sometime it connects and sometimes it doesn't. I was wondering is it something to do with the services I am starting?? Here is the sequence of the services I start for R12 Apps.
OracleServiceVIS
OracleVIS_db102_RDBMSTNSListenerVIS
OracleVIS_TOOLS_c_oracle_VIS_apps_tech_st_10_1_2TNSListenerAPPS_VIS
Oracle Process Manager for VIS_bhaskara
Do I need to start any extra services or the Order in which I am starting the services is not correct???
Thanks a lot for you help.
Bhaskara

Some people have reported good results with R12 on Windows. I find R12 on Windows about 100 times more flaky than on Linux on identical hardware. Add an external hard drive into the mix, and you have very slim odd of it working correctly, or for very long. External hard drives try to power themselves down at inopportune times when you run Oracle products on them. You also increase your chances of needing a media recovery of your datafiles if your external hard drive loses power, and you have any datafiles there.
It is a couple days work, but I recently upgraded 11.5.10.2 Vision on Linux to R12 and have a 70GB footprint. This easily fits on a laptop 100 or 120 GB (non-perpendicular recording =>stable hard drive). Also the memory footprint is much less on Linux, and I can run R12 fine on 2 GB RAM laptops, even have R12 and 11.5.10.2 with Demantra Demand Planning OAS 10.1.3 running concurrently on a T61 with 4 GB of RAM. I have R12 Windows running on a Windows machine with 3 GB of RAM, and with all the applications up, I can log in, but RAM is at 3 GB and the page file is almost full. I only advise people to install R12 on Windows that have a ton of RAM and patience trying to get it and keep it all running.

Similar Messages

Unable to connect opmn after R12 installation

Hello,
After R12 getting error
exiting with status 204
/oracle/R12/dev/inst/apps/dev_devserver/logs/appl/admin/log/adoafmctl.txt
Please guide me
Edited by: user9376205 on Apr 11, 2011 10:48 PM

Some people have reported good results with R12 on Windows. I find R12 on Windows about 100 times more flaky than on Linux on identical hardware. Add an external hard drive into the mix, and you have very slim odd of it working correctly, or for very long. External hard drives try to power themselves down at inopportune times when you run Oracle products on them. You also increase your chances of needing a media recovery of your datafiles if your external hard drive loses power, and you have any datafiles there.
It is a couple days work, but I recently upgraded 11.5.10.2 Vision on Linux to R12 and have a 70GB footprint. This easily fits on a laptop 100 or 120 GB (non-perpendicular recording =>stable hard drive). Also the memory footprint is much less on Linux, and I can run R12 fine on 2 GB RAM laptops, even have R12 and 11.5.10.2 with Demantra Demand Planning OAS 10.1.3 running concurrently on a T61 with 4 GB of RAM. I have R12 Windows running on a Windows machine with 3 GB of RAM, and with all the applications up, I can log in, but RAM is at 3 GB and the page file is almost full. I only advise people to install R12 on Windows that have a ton of RAM and patience trying to get it and keep it all running.

Unable to start Apps after cloning

Hi,
I cloned my VISION instance on linux to "VISION1".
The "perl adcfgclone.pl appsTier" command failed to start the apps tier services.
I am getting the following error.
You are running adfrmctl.sh version 115.33
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
What could be the casue for this?
How can I resolve this?
Thanks,
Dnyanesh

Hi,
While running the posclone script on appsTier, I get the following error.
Starting application Services for VISION1:
Running:
/u02/apps/vision1comn/admin/scripts/VISION1_rac1/adstrtal.sh APPS/<appspwd>
You are running adstrtal.sh version 115.14
/u02/apps/vision1comn/admin/scripts/VISION1_rac1/adstrtal.sh: line 122: /u02/apps/vision1comn/util/java/1.4/j2sdk1.4.2_04/bin/jre: No such file or directory
Check logfile /u02/apps/vision1comn/admin/log/VISION1_rac1/09161929.log for details
Exiting with status 127
Have you seen this error?
Thanks,
Dnyanesh

N8 Ovi Store unable to install app after downloade...

Hi all,
Ovi Store in my N8 unable to install app after downloaded. App are succefully downloaded but hang when start installing, i follow the prompt instruction in N8, which is click Smart Installer but prompt same installation process box & the box disappears after that without a successful installation.
App face above problem include Lyrics, Youtube Downloader, Different Tack.
My Nokia N8 firmware details :
Release : PR1.1
Software Version : 013.016
Product Code : 059D1F9
Ovi Store version : 2.06.00042
I'm not sure app at above are Qt app or not. Is it current firmware PR1.1 in N8 doesn't support Qt app yet? Anyboby has idea what's wrong for the Ovi Store?
If you find this post helpful, please show your appreciation by clicking the Kudos star at the left. If it provides you the solution, please click on the GREEN Accept as Solution button at below
Solved!
Go to Solution.

It can be solved by 5 steps :
1. Close Ovi Store and uninstall app using Application Manager.
2. Clear your browser cache data (Nokia browser>Options>Clear privacy data>All).
3. Go to file manager to clear installed app file (Menu>Application>Office>File Manager>Options>Find>Select Drive C or E depends where you install the app>Root folder>Type app name you want to remove>Delete founded file).
4. Restart your phone.
5. Open Ovi Store and install the app again.
Hope this can help you.
If you find this post helpful, please show your appreciation by clicking the Kudos star at the left. If it provides you the solution, please click on the GREEN Accept as Solution button at below

Fiori Approve Requisitions error - unable to start app

Hello Experts,
We have implemented the UIX01EAP (SAPK-10002INUIX01EAP) Fiori component. I have followed the link Approve Requisitions.
I have activated the OData Service GBAPP_PRAPPROVAL, activated the UI5 application MM_PR_APV, assigned the Business Role SAP_MM_BCR_Buyer_X1, Technical Role SAP_MM_TCR_T_X1 in the Front-end Server and the authorization role SAP_MM_PR_APV_APP in the Back-end server to the relevant User ID.
I have also followed the Configuration Tasks given in the above link including maintaining the Workflow Task under Customizing for Materials Management under Purchasing Purchase Requisition Approve Requisitions App Specify Workflow Task IDs for Approve Requisitions App.
After this when I login to the launchpad URL using the approver user, I am able to see the Buyer (MM) group on the home page and also the Approve Requisitions tile with the correct number of pending workitems.
But when I click on the Approve Requisitions tile to open the app, I get an error popup saying Failure - Unable to start App and get the below error in Chrome console.
Can this be due to some missing role/authorization? Or can this be an issue with the Approve Requisitions app itself?
Regards,
Saurabh

Thanks for your response Masa.
I am getting the below response when I run the service /sap/opu/odata/UI2/INTEROP/ResolveLink service:
Regards,
Saurabh

Failure - Unable to start app in new launchpad

Hello Friends,
We are in NW Gateway 7.4 and when I logged as User and trying to access Approve Purchase Requisition, I am getting error "Unable to start app". When I looked at error log and in Network element found the below errors. Am I missing something and what I don't understand is the error in Gateway log shows this
1. "No service found for namespace , name sra001_pcapproval, version 0001"
2. Back-end error occurred "T100 Info:GBAPP_APV_MSG-013"
Network Element error:
Gateway error:
Regards,
S.Srikanth
Tags edited by: Michael Appleby

Hi Masa,
When I gone through the error log for Approve Purchase Requisition, I am getting error "Backend error occured. T100 Info:GBAPP_APV_MSG-013".
When, I checked with URL http://xxx:8000/sap/opu/odata/sap/gbapp_prapproval;mo/LaunchPageCollection from network element in NW Gateway client, getting below error
<?xml version="1.0" encoding="utf-8" ?>
- <error xmlns="http://schemas.microsoft.com/ado/2007/08/dataservices/metadata">
<code>GBAPP_APV_MSG/013</code>
<message xml:lang="en">Workflow Task Type is not passed as filter criteria</message>
- <innererror>
<transactionid>9E830DE47F50F17D910F0A4197385754</transactionid>
<timestamp>20140717082602.1410000</timestamp>
- <Error_Resolution>
<SAP_Transaction>Run transaction /IWFND/ERROR_LOG on SAP NW Gateway hub system and search for entries with the timestamp above for more details</SAP_Transaction>
<SAP_Note>See SAP Note 1797736 for error analysis (https://service.sap.com/sap/support/notes/1797736)</SAP_Note>
</Error_Resolution>
- <errordetails>
- <errordetail>
<code>GBAPP_APV_MSG/013</code>
<message>Workflow Task Type is not passed as filter criteria</message>
<propertyref />
<severity>error</severity>
</errordetail>
But, when I checked in NW gateway client with the below URL, I am able to see the PR for approval in user inbox.
http://xxx/sap/opu/odata/sap/GBAPP_PRAPPROVAL/WorkflowTaskCollection?$filter=TaskType eq'TS00007986'
Regards,
Srikanth

Failure - Unable to start App and Service SRA001_PCAPPROVAL failed. Contact your system administrator

Hi,
We are getting "Failure - Unable to start App" and "Service SRA001_PCAPPROVAL failed. Contact your system administrator" error.
we have already activated the service and assigned the required role to User.
Regards,
Trilochan
Tags edited by: Michael Appleby

Hi Masa,
we are able to see these services:
but we are not able to find service SRA001_PCAPPROVAL in
Activate and Maintain services (/IWFND/MAINT_SERVICE) .
Could you please guide us how we can get those Odate services for application ,what are the activities we have to perform.
Regards,
Trilochan

Unable to run cs6 after download & installation xp

I am unable to execute the program after installing Help?

I downloaded cs6 to external hard drive and tried to install but wouldnt
work. Will try to download to my laptop tonight directly to the hard
drive and see if that works.
Dave 7042327283
Pat Willener http://forums.adobe.com/people/pwillener created the
discussion
"Re: Unable to run cs6 after download & installation xp"
To view the discussion, visit:
http://forums.adobe.com/message/4633076#4633076Thanks for replying,

Unable to start App World due to error 2

When I attempt to log in to Blackberry App World on my Playbook, or when I attempt to load an app update, I receive the message "Unable to start App world due to error 2". A search of the knowledge base and forums does not seem to address this issue. Any suggestions?
Solved!
Go to Solution.

jontitmas wrote:
De-brick method? Please help, how do you do this?
First do a backup because you will lose every thing on the Playbook
Then unplug the Playbook from the computer and make sure that you are using the latest version of the Desktop Manager on your computer.
Turn off the Playbook
With the Desktop Manager running, plug the Playbook into the computer without turning it on
On the computer you will see a message saying that it can not communicate with the Playbook, on that message there is a button that says UPGRADE, click on it then after that REPAIR, and INSTALL
This will reset the Playbook to the factory setting, so you will have to redo all the initial setup
good luck
Using the Playbook and the Z10 and the Z30 and loving them
Martin

Getting error while applyin patch after R12 installation

I applying patch 8940108 after R12 installation. Pls. suggest what needs to be done.
Patch 8940108: Optional component(s) missing : [ oracle.precomp.lang, 11.1.0.7.0 ]
Prerequisite check "CheckRollbackable" on auto-rollback patches failed.
The details are:
Patch 7708340:
Archive Action: Source file "/db01/opt/oracle/product/11.1.0_egebrt/.patch_storage/7708340_Jan_28_2009_11_33_00/files/lib/libpls11.a/pkv.o" does not exist.
'oracle.rdbms, 11.1.0.7.0': Cannot update file '/db01/opt/oracle/product/11.1.0_egebrt/lib/libpls11.a' with '/pkv.o'
Archive Action: Source file "/db01/opt/oracle/product/11.1.0_egebrt/.patch_storage/7708340_Jan_28_2009_11_33_00/files/lib/libpls11.a/pkv.o" does not exist.
'oracle.rdbms.rman, 11.1.0.7.0': Cannot update file '/db01/opt/oracle/product/11.1.0_egebrt/lib/libpls11.a' with '/pkv.o'
ApplySession failed during prerequisite checks: Prerequisite check "CheckRollbackable" on auto-rollback patches failed.
System intact, OPatch will not attempt to restore the system
The following warnings have occurred during OPatch execution:
1) OUI-67078:Interim patch 8940108 is a superset of the patch(es) [ 7708340 ] in OH /db01/opt/oracle/product/11.1.0_egebrt
OPatch failed with error code 74

Hi;
The following warnings have occurred during OPatch execution:
1) OUI-67078:Interim patch 8940108 is a superset of the patch(es) [ 7708340 ] in OH /db01/opt/oracle/product/11.1.0_egebrt
Its mean if you have patch 8940108 on your system already and if you try to apply patch 7708340 than you dont need to apply patch 7708340,coz patch 8940108 already cover patch 7708340.
You can try this
opatch -lsinventory|grep 8940108
Regard
Helios

Unable to Download Apps after going through all the troubleshooting. What do I do next?

Unable to Download Apps after going through all the troubleshooting. What do I do next?

Also, see here
http://decipher-media.blogspot.co.uk/2011/05/itunes-sync-vs-backup-how-to-ensure -you.html
http://support.apple.com/kb/HT4946

Failure - Unable to Start App - Fiori App

Hi,
I am getting the and error Failure-Unable to Start App when i am trying to start any App from my Launchpad.
Below is the error we are getting
2014-09-05 17:52:45 Failed to resolve navigation target: #PurchasingDocumentItem-display - Could not resolve link 'PurchasingDocumentItem-display' sap.ushell.renderers.fiori2.Shell.controller"
Any help would be appreciated.
Thanks
Sarves
Tags edited by: Michael Appleby

Hi Sarves,
Can you please try clear cash.
You can also clean up your Model and RDP Cache by running (/iwbep/cache_cleanup) in ECC and in GW try (/iwfnd/cache_cleanup) please try it.
Regards,
Gurpal

After 10g Upgrade, Unable to start apps listener.

1. Apps 11.5.10.2 DB 9.2.0.8
2. Successfully upgraded DB to 10.2.0 (Metalink Note: 362203.1)
3. Ran ADCONFIG on DB successfully
4. Ran ADCONFIG on Apps successfully.
5. Restarted Server
All services started successfully except
1. Apps Listener
2. Report Server
3. Concurrent Manager
Further investigation reveals the issue is with Apps Listener. When I start apps listener manually ...
E:\oracle\prodcomn\admin\scripts\PROD_r12srvr>adalnctl start apps/fumble
ECHO is off.
ECHO is off.
Mon 05/12/2008 08:14 PM
ECHO is off.
The environment settings are as follows ...
ECHO is off.
ORACLE_HOME : e:\oracle\prodora2\8.0.6
LOCAL : PROD
ORACLE_SID :
PATH : e:\oracle\prodora2\8.0.6\bin;c:\jdk13\bin;e:\oracle\prodora2\8.0.6\bin;c:\jdk13\bin;e:\oracle\prodappl\au\11.5.0\bin;e:
\oracle\prodappl\fnd\11.5.0\bin;e:\oracle\prodappl\ad\11.5.0\bin;E:\oracle\prodora2\iAS\appsoui\jre\1.3.1\bin;E:\oracle\prodora2\iAS\Apache\
perl\5.00503\bin\MSWin32-x86\;e:\oracle\prodcomn\util\unzip\unzip;e:\oracle\prodora2\8.0.6\bin;c:\jdk13\bin;C:\vscommon\msdev98\BIN;c:\vc8\B
IN;C:\vscommon\TOOLS\WINNT;C:\vscommon\TOOLS;e:\oracle\prodappl\au\11.5.0\bin;e:\oracle\prodappl\fnd\11.5.0\bin;e:\oracle\prodappl\ad\11.5.0
\bin;E:\oracle\prodora2\iAS\appsoui\jre\1.3.1\bin;E:\oracle\prodora2\iAS\Apache\perl\5.00503\bin\MSWin32-x86\;e:\oracle\prodcomn\util\unzip\
unzip;e:\oracle\prodora2\8.0.6\bin;c:\jdk13\bin;C:\MKS\bin\x11;C:\vscommon\Tools\WinNT;C:\vscommon\MSDev98\Bin;C:\vscommon\Tools;c:\vc8\bin;
c:\mks\mksnt;c:\mks\bin;c:\jdk13;c:\r11itools;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\system32\wbem;
LD_LIBRARY_PATH : e:\oracle\prodora2\8.0.6\lib
ECHO is off.
ECHO is off.
Starting listener process "APPS_PROD" ...
ECHO is off.
LSNRCTL80 for 32-bit Windows: Version 8.0.6.3.0 - Production on 12-MAY-2008 20:14:58
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=TCP)(Host=r12srvr)(Port=1627))
TNS-12224: TNS:no listener
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
LSNRCTL80 for 32-bit Windows: Version 8.0.6.3.0 - Production on 12-MAY-2008 20:15:00
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Starting tnslsnr80: please wait...
Service OraclePRODOra806_3TNSListener80APPS_PROD start pending.
Service OraclePRODOra806_3TNSListener80APPS_PROD started.
TNS-12560: TNS:protocol adapter error
adalnctl.cmd exiting with status 3
The error 3 means "The system cannot find the path specified".
Anyone! Please help me. It is very very urgent.
Thanks in advance.
S. Sundar

This is Oracle Apps. Did you check all requirements before upgrading only the database layer to 10g?
You may need to change your start/stop scripts to reflect the changes to the database layer (listener ports etc).
E-Business Suite Forum?
http://forums.oracle.com/forums/category.jspa?categoryID=3

Unable to start xorg after latest nvidia update

Hi,
I have NVIDIA GeForce GTX 750 card. I did update to version 346.47 of nvidia driver and figured out that after reboot SDDM dont start. I disabled login manager and tried to start xorg server manually but without success. I see that there is segmentation fault in log but don't understand where it comes from exectly.
Output of /var/log/Xorg.0.log:
[ 18.250]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 18.251] X Protocol Version 11, Revision 0
[ 18.251] Build Operating System: Linux 3.18.6-1-ARCH x86_64
[ 18.251] Current Operating System: Linux lolik-pc 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015 x86_64
[ 18.251] Kernel command line: \boot\vmlinuz-linux rw root=UUID=d0592c05-2ed2-4bd2-be47-6a2762e5c3c3 rootfstype=ext4 initrd=boot\initramfs-linux.img
[ 18.252] Build Date: 22 February 2015 12:50:32PM
[ 18.253]
[ 18.253] Current version of pixman: 0.32.6
[ 18.254] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 18.254] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 18.255] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb 28 13:33:14 2015
[ 18.260] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 18.261] (==) No Layout section. Using the first Screen section.
[ 18.261] (==) No screen section available. Using defaults.
[ 18.261] (**) |-->Screen "Default Screen Section" (0)
[ 18.261] (**) | |-->Monitor "<default monitor>"
[ 18.261] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 18.261] (==) Automatically adding devices
[ 18.261] (==) Automatically enabling devices
[ 18.261] (==) Automatically adding GPU devices
[ 18.267] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[ 18.267] Entry deleted from font path.
[ 18.267] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[ 18.271] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 18.271] Entry deleted from font path.
[ 18.271] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 18.272] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 18.272] Entry deleted from font path.
[ 18.272] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 18.272] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 18.272] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 18.272] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 18.272] (II) Loader magic: 0x815d80
[ 18.272] (II) Module ABI versions:
[ 18.272] X.Org ANSI C Emulation: 0.4
[ 18.272] X.Org Video Driver: 19.0
[ 18.272] X.Org XInput driver : 21.0
[ 18.272] X.Org Server Extension : 9.0
[ 18.273] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 18.273] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 18.273] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[ 18.273] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 18.273] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 9 paused 0
[ 18.274] (--) PCI: (0:0:2:0) 8086:0412:1458:d000 rev 6, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 18.274] (--) PCI:*(0:1:0:0) 10de:1380:1462:3102 rev 162, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 18.274] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 18.274] (II) LoadModule: "glx"
[ 18.275] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 18.342] (II) Module glx: vendor="NVIDIA Corporation"
[ 18.342] compiled for 4.0.2, module version = 1.0.0
[ 18.342] Module class: X.Org Server Extension
[ 18.343] (II) NVIDIA GLX Module 346.47 Thu Feb 19 18:09:07 PST 2015
[ 18.343] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[ 18.343] loading driver: nvidia
[ 18.343] (==) Matched nvidia as autoconfigured driver 0
[ 18.343] (==) Matched nouveau as autoconfigured driver 1
[ 18.343] (==) Matched nv as autoconfigured driver 2
[ 18.343] (==) Matched intel as autoconfigured driver 3
[ 18.343] (==) Matched nouveau as autoconfigured driver 4
[ 18.343] (==) Matched nv as autoconfigured driver 5
[ 18.343] (==) Matched modesetting as autoconfigured driver 6
[ 18.343] (==) Matched fbdev as autoconfigured driver 7
[ 18.343] (==) Matched vesa as autoconfigured driver 8
[ 18.343] (==) Assigned the driver to the xf86ConfigLayout
[ 18.343] (II) LoadModule: "nvidia"
[ 18.344] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 18.349] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 18.349] compiled for 4.0.2, module version = 1.0.0
[ 18.349] Module class: X.Org Video Driver
[ 18.350] (II) LoadModule: "nouveau"
[ 18.350] (WW) Warning, couldn't open module nouveau
[ 18.350] (II) UnloadModule: "nouveau"
[ 18.350] (II) Unloading nouveau
[ 18.350] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 18.350] (II) LoadModule: "nv"
[ 18.350] (WW) Warning, couldn't open module nv
[ 18.350] (II) UnloadModule: "nv"
[ 18.350] (II) Unloading nv
[ 18.350] (EE) Failed to load module "nv" (module does not exist, 0)
[ 18.350] (II) LoadModule: "intel"
[ 18.350] (WW) Warning, couldn't open module intel
[ 18.350] (II) UnloadModule: "intel"
[ 18.350] (II) Unloading intel
[ 18.350] (EE) Failed to load module "intel" (module does not exist, 0)
[ 18.350] (II) LoadModule: "modesetting"
[ 18.350] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 18.350] (II) Module modesetting: vendor="X.Org Foundation"
[ 18.350] compiled for 1.17.1, module version = 1.17.1
[ 18.350] Module class: X.Org Video Driver
[ 18.350] ABI class: X.Org Video Driver, version 19.0
[ 18.350] (II) LoadModule: "fbdev"
[ 18.350] (WW) Warning, couldn't open module fbdev
[ 18.350] (II) UnloadModule: "fbdev"
[ 18.350] (II) Unloading fbdev
[ 18.350] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 18.350] (II) LoadModule: "vesa"
[ 18.350] (WW) Warning, couldn't open module vesa
[ 18.350] (II) UnloadModule: "vesa"
[ 18.350] (II) Unloading vesa
[ 18.350] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 18.350] (II) NVIDIA dlloader X Driver 346.47 Thu Feb 19 17:47:18 PST 2015
[ 18.350] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 18.351] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 18.351] (++) using VT number 1
[ 18.351] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 18.351] (II) Loading sub module "fb"
[ 18.351] (II) LoadModule: "fb"
[ 18.351] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 18.352] (II) Module fb: vendor="X.Org Foundation"
[ 18.352] compiled for 1.17.1, module version = 1.0.0
[ 18.352] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.352] (II) Loading sub module "wfb"
[ 18.352] (II) LoadModule: "wfb"
[ 18.352] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 18.353] (II) Module wfb: vendor="X.Org Foundation"
[ 18.353] compiled for 1.17.1, module version = 1.0.0
[ 18.353] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.353] (II) Loading sub module "ramdac"
[ 18.353] (II) LoadModule: "ramdac"
[ 18.353] (II) Module "ramdac" already built-in
[ 18.354] (II) modeset(G0): using drv /dev/dri/card1
[ 18.354] (WW) Falling back to old probe method for modesetting
[ 18.354] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 18.354] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 18.354] (==) NVIDIA(0): RGB weight 888
[ 18.354] (==) NVIDIA(0): Default visual is TrueColor
[ 18.354] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 18.354] (**) NVIDIA(0): Enabling 2D acceleration
[ 18.948] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[ 18.948] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 750 Ti (GM107-A) at PCI:1:0:0 (GPU-0)
[ 18.948] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 18.948] (--) NVIDIA(0): VideoBIOS: 82.07.32.00.18
[ 18.948] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 18.952] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 750 Ti at PCI:1:0:0
[ 18.952] (--) NVIDIA(0): CRT-0
[ 18.952] (--) NVIDIA(0): DELL U2211H (DFP-0) (boot, connected)
[ 18.952] (--) NVIDIA(0): DFP-1
[ 18.952] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 18.952] (--) NVIDIA(0): DELL U2211H (DFP-0): Internal TMDS
[ 18.952] (--) NVIDIA(GPU-0): DELL U2211H (DFP-0): 330.0 MHz maximum pixel clock
[ 18.952] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 18.952] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 18.952] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 18.952] (**) NVIDIA(0): device DELL U2211H (DFP-0) (Using EDID frequencies has
[ 18.952] (**) NVIDIA(0): been enabled on all display devices.)
[ 18.953] (==) NVIDIA(0):
[ 18.953] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 18.953] (==) NVIDIA(0): will be used as the requested mode.
[ 18.953] (==) NVIDIA(0):
[ 18.953] (II) NVIDIA(0): Validated MetaModes:
[ 18.953] (II) NVIDIA(0): "DFP-0:nvidia-auto-select"
[ 18.953] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 18.983] (--) NVIDIA(0): DPI set to (101, 101); computed from "UseEdidDpi" X config
[ 18.983] (--) NVIDIA(0): option
[ 18.983] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[ 18.983] (==) modeset(G0): RGB weight 888
[ 18.983] (==) modeset(G0): Default visual is TrueColor
[ 18.983] (II) Loading sub module "glamoregl"
[ 18.983] (II) LoadModule: "glamoregl"
[ 18.983] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 18.995] (II) Module glamoregl: vendor="X.Org Foundation"
[ 18.995] compiled for 1.17.1, module version = 1.0.0
[ 18.995] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.995] (II) glamor: OpenGL accelerated X.org driver based.
[ 19.024] (EE)
[ 19.024] (EE) Backtrace:
[ 19.025] (EE) 0: /usr/lib/xorg-server/Xorg (OsLookupColor+0x119) [0x5949c9]
[ 19.026] (EE) 1: /usr/lib/libc.so.6 (__restore_rt+0x0) [0x7fc93cef353f]
[ 19.028] (EE) 2: /usr/lib/libX11.so.6 (_XSend+0x2b) [0x7fc932e6a0bb]
[ 19.028] (EE) 3: /usr/lib/libX11.so.6 (_XFlush+0x15) [0x7fc932e6a575]
[ 19.028] (EE) 4: /usr/lib/libX11.so.6 (_XGetRequest+0x65) [0x7fc932e6d055]
[ 19.028] (EE) 5: /usr/lib/libX11.so.6 (XQueryExtension+0x4d) [0x7fc932e605ed]
[ 19.028] (EE) 6: /usr/lib/libX11.so.6 (XInitExtension+0x32) [0x7fc932e54392]
[ 19.028] (EE) 7: /usr/lib/libXext.so.6 (XextAddDisplay+0x4f) [0x7fc932c2338f]
[ 19.028] (EE) 8: /usr/lib/libnvidia-glsi.so.346.47 (_nv016glsi+0x5f3f7) [0x7fc93322c3d7]
[ 19.028] (EE) 9: /usr/lib/libnvidia-glsi.so.346.47 (_nv016glsi+0x804) [0x7fc93316ebf4]
[ 19.028] (EE) unw_get_proc_name failed: no unwind info found [-10]
[ 19.028] (EE) 10: /usr/lib/libEGL.so.1 (?+0x804) [0x7fc933417ef4]
[ 19.028] (EE) unw_get_proc_name failed: no unwind info found [-10]
[ 19.028] (EE) 11: /usr/lib/libEGL.so.1 (?+0x804) [0x7fc933418924]
[ 19.028] (EE) 12: /usr/lib/libEGL.so.1 (NvEglRegClientApi+0x4f36) [0x7fc933425866]
[ 19.028] (EE) 13: /usr/lib/xorg/modules/libglamoregl.so (glamor_egl_init+0x99) [0x7fc935930539]
[ 19.029] (EE) 14: /usr/lib/xorg/modules/drivers/modesetting_drv.so (_init+0x29ce) [0x7fc935fc7e9e]
[ 19.029] (EE) 15: /usr/lib/xorg-server/Xorg (InitOutput+0xbcc) [0x47b63c]
[ 19.029] (EE) 16: /usr/lib/xorg-server/Xorg (remove_fs_handlers+0x22a) [0x43c9da]
[ 19.029] (EE) 17: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7fc93cee0800]
[ 19.029] (EE) 18: /usr/lib/xorg-server/Xorg (_start+0x29) [0x427039]
[ 19.029] (EE) 19: ? (?+0x29) [0x29]
[ 19.029] (EE)
[ 19.029] (EE) Segmentation fault at address 0x0
[ 19.029] (EE)
Fatal server error:
[ 19.029] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 19.029] (EE)
[ 19.029] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 19.029] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 19.029] (EE)
[ 19.031] (EE) Server terminated with error (1). Closing log file.
Output of command "lspci -k | grep -A 2 -i "VGA""
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller (rev 06)
Subsystem: Gigabyte Technology Co., Ltd Device d000
Kernel driver in use: i915
01:00.0 VGA compatible controller: NVIDIA Corporation GM107 [GeForce GTX 750 Ti] (rev a2)
Subsystem: Micro-Star International Co., Ltd. [MSI] Device 3102
Kernel driver in use: nvidia
Output of command "modinfo nvidia"
filename: /lib/modules/3.18.6-1-ARCH/extramodules/nvidia.ko.gz
alias: char-major-195-*
version: 346.47
supported: external
license: NVIDIA
alias: pci:v000010DEd00000E00sv*sd*bc04sc80i00*
alias: pci:v000010DEd00000AA3sv*sd*bc0Bsc40i00*
alias: pci:v000010DEd*sv*sd*bc03sc02i00*
alias: pci:v000010DEd*sv*sd*bc03sc00i00*
depends: drm,i2c-core
vermagic: 3.18.6-1-ARCH SMP preempt mod_unload modversions
parm: NVreg_Mobile:int
parm: NVreg_ResmanDebugLevel:int
parm: NVreg_RmLogonRC:int
parm: NVreg_ModifyDeviceFiles:int
parm: NVreg_DeviceFileUID:int
parm: NVreg_DeviceFileGID:int
parm: NVreg_DeviceFileMode:int
parm: NVreg_RemapLimit:int
parm: NVreg_UpdateMemoryTypes:int
parm: NVreg_InitializeSystemMemoryAllocations:int
parm: NVreg_UsePageAttributeTable:int
parm: NVreg_MapRegistersEarly:int
parm: NVreg_RegisterForACPIEvents:int
parm: NVreg_CheckPCIConfigSpace:int
parm: NVreg_EnablePCIeGen3:int
parm: NVreg_EnableMSI:int
parm: NVreg_MemoryPoolSize:int
parm: NVreg_RegistryDwords:charp
parm: NVreg_RmMsg:charp
parm: NVreg_AssignGpus:charp
In addition, in order to disable sddm I downloaded latest Arch linux installation CD (2015.02.01) but I was unable to start PC with this version. Loading stuck after first 3 lines, after "triggering udevevents".
I had old version 2014.08 and it worked ok.
Thanks,
Alexey

I just wanted to echo eugeneyche's comment. I ran the same steps mentioned by ElectricPrism but that didn't really fix them. I had to add nomodeset to my kernel parameters. I now want to know what's really going on. For the record, this was my backtrace:
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (**) NVIDIA(0): device Ancor Communications Inc ASUS VE278 (DFP-1) (Using
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (**) NVIDIA(0): EDID frequencies has been enabled on all display
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (**) NVIDIA(0): devices.)
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (==) NVIDIA(0):
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (==) NVIDIA(0): will be used as the requested mode.
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (==) NVIDIA(0):
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (II) NVIDIA(0): Validated MetaModes:
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (II) NVIDIA(0): "DFP-0:nvidia-auto-select,DFP-1:nvidia-auto-select"
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (II) NVIDIA(0): Virtual screen size determined to be 3600 x 1080
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (--) NVIDIA(0): DPI set to (90, 88); computed from "UseEdidDpi" X config
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (--) NVIDIA(0): option
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (==) modeset(G0): RGB weight 888
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (==) modeset(G0): Default visual is TrueColor
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (II) Loading sub module "glamoregl"
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (II) LoadModule: "glamoregl"
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (II) Loading /usr/lib/xorg/modules/libglamoregl.so
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (II) Module glamoregl: vendor="X.Org Foundation"
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: compiled for 1.17.1, module version = 1.0.0
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: ABI class: X.Org ANSI C Emulation, version 0.4
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (II) glamor: OpenGL accelerated X.org driver based.
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE)
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) Backtrace:
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 0: /usr/lib/xorg-server/Xorg (OsLookupColor+0x119) [0x5949c9]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 1: /usr/lib/libc.so.6 (__restore_rt+0x0) [0x7fad6053a53f]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 2: /usr/lib/libxcb.so.1 (xcb_writev+0x0) [0x7fad56046100]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 3: /usr/lib/libX11.so.6 (_XSend+0x19e) [0x7fad564b122e]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 4: /usr/lib/libX11.so.6 (_XFlush+0x15) [0x7fad564b1575]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 5: /usr/lib/libX11.so.6 (_XGetRequest+0x65) [0x7fad564b4055]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 6: /usr/lib/libX11.so.6 (XQueryExtension+0x4d) [0x7fad564a75ed]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 7: /usr/lib/libX11.so.6 (XInitExtension+0x32) [0x7fad5649b392]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 8: /usr/lib/libXext.so.6 (XextAddDisplay+0x4f) [0x7fad5626a38f]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 9: /usr/lib/libnvidia-glsi.so.346.47 (_nv016glsi+0x5f3f7) [0x7fad568733d7]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 10: /usr/lib/libnvidia-glsi.so.346.47 (_nv016glsi+0x804) [0x7fad567b5bf4]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) unw_get_proc_name failed: no unwind info found [-10]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 11: /usr/lib/libEGL.so.1 (?+0x804) [0x7fad56a5eef4]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) unw_get_proc_name failed: no unwind info found [-10]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 12: /usr/lib/libEGL.so.1 (?+0x804) [0x7fad56a5f924]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 13: /usr/lib/libEGL.so.1 (NvEglRegClientApi+0x4f36) [0x7fad56a6c866]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 14: /usr/lib/xorg/modules/libglamoregl.so (glamor_egl_init+0x99) [0x7fad58f77539]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 15: /usr/lib/xorg/modules/drivers/modesetting_drv.so (_init+0x29ce) [0x7fad5960ee9e]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 16: /usr/lib/xorg-server/Xorg (InitOutput+0xbcc) [0x47b63c]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 17: /usr/lib/xorg-server/Xorg (remove_fs_handlers+0x22a) [0x43c9da]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 18: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7fad60527800]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 19: /usr/lib/xorg-server/Xorg (_start+0x29) [0x427039]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 20: ? (?+0x29) [0x29]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE)
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) Segmentation fault at address 0x0
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE)
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: Fatal server error:
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) Caught signal 11 (Segmentation fault). Server aborting
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE)
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE)
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: Please consult the The X.Org Foundation support
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: at http://wiki.x.org
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: for help.
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) Please also check the log file at "/dev/null" for additional information.
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE)
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) Server terminated with error (1). Closing log file.
Mar 09 19:57:56 dexter systemd-coredump[449]: Process 448 (Xorg) of user 0 dumped core

DNS error when launching Application login page after R12 installation

Hi ,
I installed R12.0.4 on windows server 2003.
After installation when I launch the home page, its giving dns error saying that <domainname>.<hostname> cannot be loaded.
I checked the apache alert log, it is trying to access an IP that is commented out in the host file. I am not sure where it is picking it up from. I installed loopback adapter before the installation and the entries in the host file also seem fine. Please help me out, this is the 2nd installation but the issue is still not resolved. Please let me know if you need anymore details.
Thanks !

Hi Dharmshila,
Since you were not able to access the application URL using the IP Address then I believe it is an issue with the application/database services. To verify that all application services are up and running properly, please do the following:
- Open a new DOS session
- cd %INST_TOP%\apps\<SID>_<hostname>\admin\scripts
- Issue "adopmnctl.sh status"
- You should get something similar to the following:
Checking status of OPMN managed processes...
Processes in Instance: PROD_db2.db2.domain.com
-------------------+--------------------+---------+---------
ias-component      | process-type       |     pid | status
-------------------+--------------------+---------+---------
OC4J               | oafm               |    3800 | Alive
OC4J               | forms              |    2528 | Alive
OC4J               | oacore             |    3112 | Alive
HTTP_Server        | HTTP_Server        |     172 | Alive
exiting with status 0
ERRORCODE = 0 ERRORCODE_ENDRegards,
Hussein

Unable to start APPS after R12 installation. But, DB is UP

Similar Messages

Maybe you are looking for