Unable to start BEx Analyser 7

Hi All,
I have recently upgraded my FEP to the latest available (801).
In our sandbox system, we have applied a number of OSS to help improve the performance of BEx Analyser. These all seem to work fine, as does BEx Analyser.
However, we have now applied the same OSS notes to our development system.
Unfortunately, BEx Analyser now gives a fatal error (X_MESSAGE) on opening and trying to connect to the BI system.
We presumed that this meant the OSS notes had not been applied correctly, but after checking, all appears ok.
Has anyone seen this before? Can anyone advise how to correct the issue?
I ran the BEx check tool and all OK.
This is a strange error as BEx works in one system but not another. I'm sure this rules out local PC issues. Another user has also installed the latest FEP and is facing the same error. Prior to this, they were on FEP 300 and this gave no errors in the development system.
Regards,
Mark

None of the above; organizer, editor, welcome screen appear. Nor do I get any error messages. Nothing happens.

Similar Messages

  • Unable to start Web Analysis .Service Temporarily Unavailable

    Hi,
    I am using the following URL to access Web Analysis http://testdb.xxx.xxx.xx:19000/WebAnalysis/WebAnalysis.jsp. But it throws up the following error -
    "*Service Temporarily Unavailable, the server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.*"
    FYI
    1. I'm using EPM 11.1.1.3 on Linux Server (Tikanga)
    2. Planning, Shared Services, Workspace, Essbase etc. are working fine. The problem is only with Web Analysis. However, even Web Analysis was working fine in the not-so-distant past.
    I have tried stopping and starting the Web Analysis service but that doesn't seem to help.
    Any ideas would be appreciated.
    Thanks & Cheers,
    Sahil

    Just to add to my first post, i am facing the following issues:
    1. When I restart the Web Analysis service
    [hypappl@testdb bin]$ cd /oracle/hyp/app/deployments/Tomcat5/bin
    [hypappl@testdb bin]$ ./startWebAnalysis.sh restart
    WARNING: Access to a frame buffer device, or virtual frame buffer device
    is required for chart rendering. DISPLAY is not currently set.
    Please modify /oracle/hyp/app/deployments/Tomcat5/bin/setCustomParamsWebAnalysis.sh.
    WARNING: Access to a frame buffer device, or virtual frame buffer device
    is required for chart rendering. DISPLAY is not currently set.
    Please modify /oracle/hyp/app/deployments/Tomcat5/bin/setCustomParamsWebAnalysis.sh.
    WARNING: Access to a frame buffer device, or virtual frame buffer device
    is required for chart rendering. DISPLAY is not currently set.
    Please modify /oracle/hyp/app/deployments/Tomcat5/bin/setCustomParamsWebAnalysis.sh.
    Using CATALINA_BASE: /oracle/hyp/app/deployments/Tomcat5/WebAnalysis
    Using CATALINA_HOME: /oracle/hyp/app/common/appServers/Tomcat/5.5.17
    Using CATALINA_TMPDIR: /oracle/hyp/app/deployments/Tomcat5/WebAnalysis/temp
    Using JRE_HOME: /oracle/hyp/app/common/JRE/Sun/1.5.0
    2. When I start service from biplus folder
    [hypappl@testdb bin]$ cd /oracle/hyp/app/products/biplus/bin
    [hypappl@testdb bin]$ ./start.sh restart
    WARNING: Access to a frame buffer device, or virtual frame buffer device
    is required for chart rendering. DISPLAY is not currently set.
    WARNING: Access to a frame buffer device, or virtual frame buffer device
    Please modify /oracle/hyp/app/deployments/Tomcat5/bin/setCustomParamsFinancialReporting.sh.
    is required for chart rendering. DISPLAY is not currently set.
    Please modify /oracle/hyp/app/deployments/Tomcat5/bin/setCustomParamsWebAnalysis.sh.
    WARNING: Access to a frame buffer device, or virtual frame buffer device
    is required for chart rendering. DISPLAY is not currently set.
    Please modify /oracle/hyp/app/deployments/Tomcat5/bin/setCustomParamsWebAnalysis.sh.
    3. When I run the setCustomParamsWebAnalysis.sh
    [hypappl@testdb bin]$ ./setCustomParamsWebAnalysis.sh
    WARNING: Access to a frame buffer device, or virtual frame buffer device
    is required for chart rendering. DISPLAY is not currently set.
    Please modify .
    WARNING: Access to a frame buffer device, or virtual frame buffer device
    is required for chart rendering. DISPLAY is not currently set.
    Please modify .
    WARNING: Access to a frame buffer device, or virtual frame buffer device
    is required for chart rendering. DISPLAY is not currently set.
    Please modify .
    4. And finally, when I try to open Web Analysis reports from Workspace -> Explore, I get the below error
    Required application module analyzer.reportview is not configured. Please contact your administrator.
    Web Analysis was working just fine until recently. Now the problem is only with WA. Everything else is working as it should If nothing gets Web Analysis up and running again, is there a way I can retrieve my saved report files? I can view these files from Workspace -> Explore -> Reports folder.
    Thanks,
    Sahil

  • BEx Analyser doesn't start in Excel

    Hello everybody!
    We have updated our BEx-Analyzer to patch level 5 but now we have the problem that we could not start the analyzer in Excel. Excel is running and I can see the Analyzer toolbox on the the right side but the icons has no action. We have reinstalled the hole SAP GUI and Co. but the problem. Need help. Thanks.
    Regards, Thomas

    Hi,
    Disable macros on excel spread sheets and try to open the Bex analyser it might work.
    Regards,
    Raju.B

  • Bex Analyser-Unable to login

    Hi,I am able to login to the AWB but I when I try to log into the Bex Analyser I get "not authorized client,session terminated".Is there anything I could do in AWB to log into Bex Analyser.
    Thank You,
    Regards,
    Salma.

    Looks like you are not authorized to use BEx. Check your User Authorizations in SU01.
    If you are a BW Developer you need to have SAP_ALL & SAP_NEW profiles assigned to your user profile.
    If you are authorized to use BEx, request Access from your security team.

  • What is difference between bex analyser and bex browser

    what is difference between bex analyser and bex browser . please explain what are use of both and what we do in both.

    hi
    Bex Browser
    The Business Explorer Browser (BEx Browser) makes it possible for you to access all document types of the Business Information Warehouse that are assigned to your role or that you have stored in your favorites. You can select and open documents assigned to you in the BEx Browser or store and manage new documents in the BEx Browser.
    Document types that you can work with in the BEx Browser are:
    · BW workbooks
    · Documents that are stored in the Business Document Service (BDS)
    · Links (references to file system, shortcuts)
    · Links to internet sites (URLs)
    · SAP transaction calls.
    · Web applications and Web templates
    · Crystal Reports
    Bex Analyser
    The Business Explorer Analyzer (BEx Analyzer) is the analysis and reporting tool of the Business Explorer that is embedded in Microsoft Excel.
    Features
    You can call up the BEx Query Designer in the BEx Analyzer, in order to define queries. Subsequently, you can analyze the selected InfoProvider data by navigation to the query created in the Query Designer and create different query views of the data. You can add the different query views for a query or for different queries to a work book and save them there. You can save the workbook in your favorites or in your role on the BW Server. You can also save the workbook locally on your computer.
    Beyond that, you can precalculate the workbook and distribute it by e-mail to recipeients or you can export it to the Enterprise Portal and make it accessible to other employees in the company.
    You can start queries in a standard view (with a Standard Web Template set up in Customizing) in the Web browser and forward the URL or continue to navigate on the Web. Similarly, you can export the Web query to MS Excel 2000.
    Overview of the Functional Area of the BEx Analyzer:
    ·        BEx toolbar
    You access the functions of the BEx Analyzer from the BEx toolbar, which takes you to the BEx Open dialog box where you can open existing queries, or to the BEx Query Designer where you can create new queries or change existing queries.
    ·        Evaluating Query Data
    The BEx Analyzer offers convenient functions for evaluating and presenting InfoProvider data interactively. In the BEx Analyzer, you can add queries to workbooks, navigate within them and refresh the data. You can also process the queries further in Microsoft Excel or display them in the Web browser in a default view.
    Navigation of a query allows you, for example, to filter characteristics on a single value, drilldown on all values for a characteristic, regroup characteristics and key figures in the rows and columns of the results area, or hide key figures. Navigation results in different views of the InfoProvider data. In addition, a range of further functions is available which allow you to edit a query interactively (for example, sorting, cumulated output, among others). In addition, you can use the editing functions in Microsoft Excel in order to set up individual format templates, to print results areas, or to create graphics.
    ·        Queries in Workbooks
    Queries are inserted into workbooks so you can display them. When you insert a query, a link is made between the cell areas of the worksheet and the data of the InfoProvider upon which the query is based. A link therefore exists between the Business Explorer and the Business Information Warehouse Server (BW Server).
    When inserting a query into the workbook, a VBA routine is automatically generated in the workbook. You can also connect the Business Explorer with your own VBA programs (Visual Basic for Applications).
    You can create workbook templates, into which you can insert your queries. Workbook templates can contain pre-determined items for the area of the query, formatting settings, logos, VBA macros, and so on.
    ·        Precalculating workbooks
    You can precalculate and distribute workbooks with the BEx Broadcaster, which is a Web application you get to form the BEx toolbar. The system generates MS Excel workbooks with historical data. You determine the time for precalculation yourself: You can have workbooks precalculated at a predefined time or they can be precalculated whenever data in the underlying InfoProvider changes. You can have the precalculated workbooks sent by e-mail or you can export them into the Enterprise Portal, where you can make them available to employees within your company.
    Activities
    To start the BEx Analyzer, choose Start ® Programs ® SAP Front-end Business Information Warehouse ® SAP Business Explorer Analyzer.
    You can also access the BEx Analyzer via SAP Easy Access ® SAP Business Information Warehouse ® SAP Menu ® Business Explorer ® Analyzer or in the Business Explorer Browser using the Business Explorer Analyzer symbol in the menu bar.
    Hope this will solve your issu
    nagarjuna

  • IP - Various problems with BEX Analyser - help would be nice

    Hi,
    we use IP in combination with BEX analyser. We experience certain problems. Does anyone experienced the same issues mentioned below:
    1) if a planning function is executed, it is executed twice when your cursor is within the query itself. If it is outside the query when clicking on the button, it is executed once (like it should).
    2) Locking: we don't have locking problems, but from the moment two people lock each other once, they need to close their analyser and re-open it (so logon again) in order to be able to start planning again in a non-locked part. If they just change their selection (to the not-lock part) they remain locked!!!
    3) planning function with multiple variables: system cannot retrieve values of all variables.
    details of function:
    CMD                                               1       EXECUTE_PLANNING_FUNCTION
    PLANNING FUNCTION NAME           1      AG10_COPY01
    DATA PROVIDER_FILTER                 1     DATA_PROVIDER_1
    VAR_NAME                                     1       PROF_CTR
    VAR_VALUE                                    1       510
    VAR_NAME                                     2     PERIOD
    VAR_VALUE                                    2        012
    VAR_NAME                                     3       CUSTOMER
    VAR_VALUE                                    3     1000
    -> following the instruction of the SAP course, in case of multiplle variables they should start from 0 and have an incremental increase. But the system only recognizes the variable with index = 1
    regards
    D

    Dear Dries,
    could it be that the variable type you use require a different set of commands?
    In general the parameters of the BEx Analyzer follow the rules of the SAp BW 3.5 Webruntime. When reading this detailed documentation you find that depending on the type of variable other names have to be used, e.g. when using a selection option variable you need something line varname_low, varname_high, ...
    The documentation can be found in the online-help:
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/07/ff413a3ace7022e10000000a11402f/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/07/ff413a3ace7022e10000000a11402f/content.htm</a>
    Best regards, Olaf Fischer

  • Button in Bex Analyser 7.0 - problem with setting up Static Parameters

    Hello,
    I know a similar problem has been discussed here already, but I am still having problems with setting up Static Parameters of my Button in BEx Analyser 7.0, so that I can pass Variable values from that button to my query.
    This is what I do - in Static Parameters of my Button I set the following values:
    Name                          Index          Value
    DATA_PROVIDER        0               DP_1
    CMD                             0               PROCESS_VARIABLES
    SUBCMD                      0               VAR_SUBMIT
    VAR_NAME                 0               0RMA_FIP
    VAR_VALUE               0               004/2010
    As a result, I would like the value 004/2010 to be passed to variable 0RMA_FIP (which is mandatory) and the query to be executed with that value. For some reason, however, the value is not passed correctly, and instead the variable is filled with a blank or not filled at all, and I am getting a message "Specifiy value for variable Fiscal year/period". What do I do wrong?
    Just to give you a broader picture - I would like to later use this logic to pass more than one variables into a query, including a hierarchy node, and read the values from an Excel worksheet - however, after many attempts to do so, I started playing with just one variable to figure out what the problem was.
    I have already seen the following two threads and SAP notes on passing variable values from the button:
    Re: Button in BEx Analyzer 7.0
    Re: How to set variables values via VBA.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0881371-78a1-2910-f0b8-af3e184929be?quicklink=index&overridelayout=true
    Can anyone please advise?
    Cheers,
    AL

    I managed to figure it out myself!
    Instead of VAR_VALUE I need to enter VAR_VALUE_EXT, and it works fine.
    I will mark this thread as "answered".

  • Sorry, something went wrong and Word was unable to start (6) Office 2013

    Ok this is just so annoying.
    Whenever I try to open Word, it gives the error "Sorry, something went wrong and Word was unable to start.(6)". Other office applications either freeze or crash. Only Excel works fine. Running Win7 64 bit.
    Tried all possible ways of installation/reinstallation. Did repair, uninstalled and reinstalled manually, uninstalled with FixIt from Microsoft, removed every leftover thing from registry. Also removed some other applications that I thought could cause this
    problem for Office. 
    Uninstalled 64 bit Office, and installed 32 bit, same exact problems.
    !!!Don't suggest me to run as administrator please!!!

    Hi,
    According to your description, I suppose that Word 2013 was blocked by some other applications after you opening it.
    Which operation system do you use?  Have you installed the Office 2013 SP1?
    Then, we try to do some tests to narrow down the issue:
    1. Collect the Event log
    http://windows.microsoft.com/en-us/windows/what-information-event-logs-event-viewer#1TC=windows-7
    2. Use the
    Process Monitor to collect the detailed information.
    Open process monitor, and reproduce this issue, if there is any files or keys were blocked during the process.Please let me know,  and you could save as the file from process monitor, upload the file through One Drive and share the link to me. I'll
    analysis it.
    Regards,
    George Zhao
    TechNet Community Support

  • Unable to start coreapplication obips1 component in OBII 11g

    Hi ,
    I have deployed the Rpd(Name - NdwCm) and webcatalog(Name - NdwCm)(obiee11.1.1.6.0) into EM,but I am unable to start the presentation services.
    If I deploy any another rpd and webcatalog then, Im able to start all services.. including presentation services.. Im using OBIEE11.1.1.6.0
    I am getting the following error msgs...
    In sawlog1 file .
    [2013-01-30T20:38:55.000+05:30] [OBIPS] [ERROR:10] [] [saw.views.evc.activate] [ecid: c4b0e92a0fcfb3d1:32fbcd80:13c8ba072d2:-8000-00000000000022cd,0:1] [tid: 4460] Error reading object: /system/metadata/_datatype_formats
    Sax parser returned an exception.
    Message: Invalid document structure, Entity publicId: , Entity systemId: , Line number: 1, Column number: 1[[
    File:catalogimpl.cpp
    Line:1240
    Location:
         saw.views.evc.activate
         saw.httpserver.processrequest
         saw.rpc.server.responder
         saw.rpc.server
         saw.rpc.server.handleConnection
         saw.rpc.server.dispatch
         saw.threadpool.socketrpcserver
         saw.threads
    RptPath: /shared/Animal Health/Test Results Report - Medical Tests
    SID: k1lk3o8os1o9ipashcj5f7l3ci
    SessionID: gprgf574nflptbo6gp06b8fldjahtqd4jhirgba
    AuthProps: AuthSchema=UidPwd|PWD=******|UID=bharat|User=Bharat
    ecid: c4b0e92a0fcfb3d1:32fbcd80:13c8ba072d2:-8000-00000000000022cd,0:1
    ThreadID: 4460
    In EM_
    #SEARCH_CRITERIA
    #     START_TIME: 2013-01-31T11:16:08.430+05:30
    #     END_TIME: 2013-01-31T12:16:08.430+05:30
    #     MESSAGE_TYPES:INCIDENT_ERROR, ERROR, WARNING, NOTIFICATION, TRACE, UNKNOWN
    #     ecid [OP_IS_IGNORE_CASE] c4b0e92a0fcfb3d1:5b85336b:13c8f4ebb4c:-8000-0000000000000219
    [2013-01-31T12:15:19.523+05:30] [AdminServer] [ERROR] [EM-02667] [oracle.sysman.emai.view.bi.AvailabilityView] [host: bchappidi] [nwaddr: 192.168.1.39] [tid: Thread-196] [userId: weblogic] [ecid: c4b0e92a0fcfb3d1:5b85336b:13c8f4ebb4c:-8000-0000000000000219,1:18167] [APP: em] [TARGET: /Farm_bifoundation_domain/bifoundation_domain/AdminServer/em] [TARGET_TYPE: j2ee_application] Can not restart selected component.
    [2013-01-31T12:15:19.523+05:30] [AdminServer] [NOTIFICATION:32] [EM-02667] [oracle.sysman.emai.view.bi.AvailabilityView] [host: bchappidi] [nwaddr: 192.168.1.39] [tid: Thread-196] [userId: weblogic] [ecid: c4b0e92a0fcfb3d1:5b85336b:13c8f4ebb4c:-8000-0000000000000219,1:18167] [APP: em] [TARGET: /Farm_bifoundation_domain/bifoundation_domain/AdminServer/em] [TARGET_TYPE: j2ee_application] Can not restart selected component.[[
    oracle.sysman.emai.model.bi.ModelException: Failed to invoke method: start for bean: oracle.biee.admin:oracleInstance=instance2,type=BIDomain.BIInstanceDeployment.BIComponent,biInstance=coreapplication,process=coreapplication_obips1,group=Service
         at oracle.sysman.emai.model.bi.impl.JmxUtil.invokeMethod(JmxUtil.java:191)
         at oracle.sysman.emai.model.bi.mbean.AvailabilityAssistant.processComponent(AvailabilityAssistant.java:634)
         at oracle.sysman.emai.model.bi.mbean.AvailabilityAssistant.restartComponent(AvailabilityAssistant.java:609)
         at oracle.sysman.emai.view.bi.AvailabilityView.restartComponent(AvailabilityView.java:553)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at oracle.sysman.emas.sdk.progress.WorkWrapper.run(WorkWrapper.java:96)
         at java.lang.Thread.run(Thread.java:662)
    Caused by: javax.management.MBeanException: Unable to start process: instance2: coreapplication_obips1
         at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:205)
         at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:222)
         at javax.management.remote.rmi.RMIConnectionImpl_1035_WLStub.invoke(Unknown Source)
         at javax.management.remote.rmi.RMIConnector$RemoteMBeanServerConnection.invoke(RMIConnector.java:993)
         at weblogic.management.remote.wlx.ClientProvider$WLXMBeanServerConnectionWrapper.invoke(ClientProvider.java:291)
         at weblogic.management.remote.wlx.ClientProvider$WLXMBeanServerConnectionWrapper.invoke(ClientProvider.java:291)
         at oracle.sysman.emai.model.bi.impl.JmxUtil.invokeMethod(JmxUtil.java:184)
         ... 9 more
    Caused by: javax.management.OperationsException: Unable to start process: instance2: coreapplication_obips1
         at oracle.bi.management.adminservices.mbeans.impl.ExternalExceptionHelper.externalize(ExternalExceptionHelper.java:42)
         at oracle.bi.management.adminservices.mbeans.impl.BIComponentMBeanImpl.start(BIComponentMBeanImpl.java:183)
         at oracle.bi.management.adminservices.mbeans.impl.BIComponentMBeanImpl.start(BIComponentMBeanImpl.java:156)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at oracle.as.jmx.framework.standardmbeans.spi.OracleStandardEmitterMBean.doInvoke(OracleStandardEmitterMBean.java:1012)
         at oracle.adf.mbean.share.AdfMBeanInterceptor.internalInvoke(AdfMBeanInterceptor.java:104)
         at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doInvoke(AbstractMBeanInterceptor.java:252)
         at oracle.as.jmx.framework.generic.spi.security.AbstractMBeanSecurityInterceptor.internalInvoke(AbstractMBeanSecurityInterceptor.java:190)
         at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doInvoke(AbstractMBeanInterceptor.java:252)
         at oracle.security.jps.ee.jmx.JpsJmxInterceptor$2.run(JpsJmxInterceptor.java:358)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
         at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
         at oracle.security.jps.ee.jmx.JpsJmxInterceptor.internalInvoke(JpsJmxInterceptor.java:374)
         at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doInvoke(AbstractMBeanInterceptor.java:252)
         at oracle.as.jmx.framework.generic.spi.interceptors.ContextClassLoaderMBeanInterceptor.internalInvoke(ContextClassLoaderMBeanInterceptor.java:103)
         at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doInvoke(AbstractMBeanInterceptor.java:252)
         at oracle.as.jmx.framework.generic.spi.interceptors.MBeanRestartInterceptor.internalInvoke(MBeanRestartInterceptor.java:116)
         at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doInvoke(AbstractMBeanInterceptor.java:252)
         at oracle.as.jmx.framework.generic.spi.interceptors.LoggingMBeanInterceptor.internalInvoke(LoggingMBeanInterceptor.java:524)
         at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doInvoke(AbstractMBeanInterceptor.java:252)
         at oracle.as.jmx.framework.standardmbeans.spi.OracleStandardEmitterMBean.invoke(OracleStandardEmitterMBean.java:924)
         at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:836)
         at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:761)
         at weblogic.management.mbeanservers.domainruntime.internal.FederatedMBeanServerInterceptor.invoke(FederatedMBeanServerInterceptor.java:349)
         at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$16.run(WLSMBeanServerInterceptorBase.java:449)
         at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.invoke(WLSMBeanServerInterceptorBase.java:447)
         at weblogic.management.mbeanservers.internal.JMXContextInterceptor.invoke(JMXContextInterceptor.java:263)
         at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$16.run(WLSMBeanServerInterceptorBase.java:449)
         at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.invoke(WLSMBeanServerInterceptorBase.java:447)
         at weblogic.management.mbeanservers.internal.SecurityMBeanMgmtOpsInterceptor.invoke(SecurityMBeanMgmtOpsInterceptor.java:65)
         at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$16.run(WLSMBeanServerInterceptorBase.java:449)
         at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.invoke(WLSMBeanServerInterceptorBase.java:447)
         at weblogic.management.mbeanservers.internal.SecurityInterceptor.invoke(SecurityInterceptor.java:444)
         at weblogic.management.jmx.mbeanserver.WLSMBeanServer.invoke(WLSMBeanServer.java:323)
         at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$11$1.run(JMXConnectorSubjectForwarder.java:663)
         at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$11.run(JMXConnectorSubjectForwarder.java:661)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
         at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder.invoke(JMXConnectorSubjectForwarder.java:654)
         at javax.management.remote.rmi.RMIConnectionImpl.doOperation(RMIConnectionImpl.java:1427)
         at javax.management.remote.rmi.RMIConnectionImpl.access$200(RMIConnectionImpl.java:72)
         at javax.management.remote.rmi.RMIConnectionImpl$PrivilegedOperation.run(RMIConnectionImpl.java:1265)
         at javax.management.remote.rmi.RMIConnectionImpl.doPrivilegedOperation(RMIConnectionImpl.java:1367)
         at javax.management.remote.rmi.RMIConnectionImpl.invoke(RMIConnectionImpl.java:788)
         at javax.management.remote.rmi.RMIConnectionImpl_WLSkel.invoke(Unknown Source)
         at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:174)
         ... 15 more
    [2013-01-31T12:15:19.524+05:30] [AdminServer] [ERROR] [] [oracle.sysman.emas.sdk.progress.WorkWrapper] [host: bchappidi] [nwaddr: 192.168.1.39] [tid: Thread-196] [userId: weblogic] [ecid: c4b0e92a0fcfb3d1:5b85336b:13c8f4ebb4c:-8000-0000000000000219,1:18167] [APP: em] [TARGET: /Farm_bifoundation_domain/bifoundation_domain/AdminServer/em] [TARGET_TYPE: j2ee_application] WorkWrapper caught exception:
    [2013-01-31T12:15:19.524+05:30] [AdminServer] [NOTIFICATION:32] [] [oracle.sysman.emas.sdk.progress.WorkWrapper] [host: bchappidi] [nwaddr: 192.168.1.39] [tid: Thread-196] [userId: weblogic] [ecid: c4b0e92a0fcfb3d1:5b85336b:13c8f4ebb4c:-8000-0000000000000219,1:18167] [APP: em] [TARGET: /Farm_bifoundation_domain/bifoundation_domain/AdminServer/em] [TARGET_TYPE: j2ee_application] WorkWrapper caught exception: [[
    oracle.sysman.emSDK.app.exception.EMSystemException
         at oracle.sysman.emai.view.bi.AvailabilityView.restartComponent(AvailabilityView.java:557)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at oracle.sysman.emas.sdk.progress.WorkWrapper.run(WorkWrapper.java:96)
         at java.lang.Thread.run(Thread.java:662)
    Caused by: oracle.sysman.emai.model.bi.ModelException: Failed to invoke method: start for bean: oracle.biee.admin:oracleInstance=instance2,type=BIDomain.BIInstanceDeployment.BIComponent,biInstance=coreapplication,process=coreapplication_obips1,group=Service
         at oracle.sysman.emai.model.bi.impl.JmxUtil.invokeMethod(JmxUtil.java:191)
         at oracle.sysman.emai.model.bi.mbean.AvailabilityAssistant.processComponent(AvailabilityAssistant.java:634)
         at oracle.sysman.emai.model.bi.mbean.AvailabilityAssistant.restartComponent(AvailabilityAssistant.java:609)
         at oracle.sysman.emai.view.bi.AvailabilityView.restartComponent(AvailabilityView.java:553)
         ... 6 more
    Caused by: javax.management.MBeanException: Unable to start process: instance2: coreapplication_obips1
         at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:205)
         at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:222)
         at javax.management.remote.rmi.RMIConnectionImpl_1035_WLStub.invoke(Unknown Source)
         at javax.management.remote.rmi.RMIConnector$RemoteMBeanServerConnection.invoke(RMIConnector.java:993)
         at weblogic.management.remote.wlx.ClientProvider$WLXMBeanServerConnectionWrapper.invoke(ClientProvider.java:291)
         at weblogic.management.remote.wlx.ClientProvider$WLXMBeanServerConnectionWrapper.invoke(ClientProvider.java:291)
         at oracle.sysman.emai.model.bi.impl.JmxUtil.invokeMethod(JmxUtil.java:184)
         ... 9 more
    Caused by: javax.management.OperationsException: Unable to start process: instance2: coreapplication_obips1
         at oracle.bi.management.adminservices.mbeans.impl.ExternalExceptionHelper.externalize(ExternalExceptionHelper.java:42)
         at oracle.bi.management.adminservices.mbeans.impl.BIComponentMBeanImpl.start(BIComponentMBeanImpl.java:183)
         at oracle.bi.management.adminservices.mbeans.impl.BIComponentMBeanImpl.start(BIComponentMBeanImpl.java:156)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at oracle.as.jmx.framework.standardmbeans.spi.OracleStandardEmitterMBean.doInvoke(OracleStandardEmitterMBean.java:1012)
         at oracle.adf.mbean.share.AdfMBeanInterceptor.internalInvoke(AdfMBeanInterceptor.java:104)
         at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doInvoke(AbstractMBeanInterceptor.java:252)
         at oracle.as.jmx.framework.generic.spi.security.AbstractMBeanSecurityInterceptor.internalInvoke(AbstractMBeanSecurityInterceptor.java:190)
         at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doInvoke(AbstractMBeanInterceptor.java:252)
         at oracle.security.jps.ee.jmx.JpsJmxInterceptor$2.run(JpsJmxInterceptor.java:358)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
         at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
         at oracle.security.jps.ee.jmx.JpsJmxInterceptor.internalInvoke(JpsJmxInterceptor.java:374)
         at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doInvoke(AbstractMBeanInterceptor.java:252)
         at oracle.as.jmx.framework.generic.spi.interceptors.ContextClassLoaderMBeanInterceptor.internalInvoke(ContextClassLoaderMBeanInterceptor.java:103)
         at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doInvoke(AbstractMBeanInterceptor.java:252)
         at oracle.as.jmx.framework.generic.spi.interceptors.MBeanRestartInterceptor.internalInvoke(MBeanRestartInterceptor.java:116)
         at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doInvoke(AbstractMBeanInterceptor.java:252)
         at oracle.as.jmx.framework.generic.spi.interceptors.LoggingMBeanInterceptor.internalInvoke(LoggingMBeanInterceptor.java:524)
         at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doInvoke(AbstractMBeanInterceptor.java:252)
         at oracle.as.jmx.framework.standardmbeans.spi.OracleStandardEmitterMBean.invoke(OracleStandardEmitterMBean.java:924)
         at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:836)
         at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:761)
         at weblogic.management.mbeanservers.domainruntime.internal.FederatedMBeanServerInterceptor.invoke(FederatedMBeanServerInterceptor.java:349)
         at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$16.run(WLSMBeanServerInterceptorBase.java:449)
         at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.invoke(WLSMBeanServerInterceptorBase.java:447)
         at weblogic.management.mbeanservers.internal.JMXContextInterceptor.invoke(JMXContextInterceptor.java:263)
         at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$16.run(WLSMBeanServerInterceptorBase.java:449)
         at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.invoke(WLSMBeanServerInterceptorBase.java:447)
         at weblogic.management.mbeanservers.internal.SecurityMBeanMgmtOpsInterceptor.invoke(SecurityMBeanMgmtOpsInterceptor.java:65)
         at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$16.run(WLSMBeanServerInterceptorBase.java:449)
         at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.invoke(WLSMBeanServerInterceptorBase.java:447)
         at weblogic.management.mbeanservers.internal.SecurityInterceptor.invoke(SecurityInterceptor.java:444)
         at weblogic.management.jmx.mbeanserver.WLSMBeanServer.invoke(WLSMBeanServer.java:323)
         at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$11$1.run(JMXConnectorSubjectForwarder.java:663)
         at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$11.run(JMXConnectorSubjectForwarder.java:661)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
         at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder.invoke(JMXConnectorSubjectForwarder.java:654)
         at javax.management.remote.rmi.RMIConnectionImpl.doOperation(RMIConnectionImpl.java:1427)
         at javax.management.remote.rmi.RMIConnectionImpl.access$200(RMIConnectionImpl.java:72)
         at javax.management.remote.rmi.RMIConnectionImpl$PrivilegedOperation.run(RMIConnectionImpl.java:1265)
         at javax.management.remote.rmi.RMIConnectionImpl.doPrivilegedOperation(RMIConnectionImpl.java:1367)
         at javax.management.remote.rmi.RMIConnectionImpl.invoke(RMIConnectionImpl.java:788)
         at javax.management.remote.rmi.RMIConnectionImpl_WLSkel.invoke(Unknown Source)
         at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:174)
         ... 15 more
    #MESSAGE_COUNT: 12
    Can anyone have any clue about it?.
    Pls help me..
    Thanks & Regards
    Bharath Kumar

    Hi srini,
    Thanks Srini for ur Reply,
    Actually I created one empty catalog folder in this path(D:\OBIEE11g\instances\instance2\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1\catalog) next what i did is ,from the source catalog folder I was copyied all shared reports,dashbords into target (catalag->root-->) shared folder
    I have done the same way as u said. Im able to start the presentation services but
    when Im trying to open or edit some reports(few reports are opening with no issues),Im getting below error msg..
    Path not found (/shared/Analytical Testing/(171.0) Nutrient Analysis - Hills Vs External)
    Error Details
    Error Codes: U9KP7Q94
    Regards
    Bharath
    Edited by: 944656 on Jan 31, 2013 11:48 PM

  • Failure - Unable to start app in new launchpad

    Hello Friends,
    We are in NW Gateway 7.4 and when I logged as User and trying to access Approve Purchase Requisition, I am  getting error "Unable to start app". When I looked at error log and in Network element found the below errors. Am I missing something and what I don't understand is the error in Gateway log shows this
    1. "No service found for namespace , name sra001_pcapproval, version 0001"
    2.  Back-end error occurred "T100 Info:GBAPP_APV_MSG-013"
    Network Element error:
    Gateway error:
    Regards,
    S.Srikanth
    Tags edited by: Michael Appleby

    Hi Masa,
    When I gone through the error log for Approve Purchase Requisition, I am getting error "Backend error occured. T100 Info:GBAPP_APV_MSG-013".
    When, I checked with URL http://xxx:8000/sap/opu/odata/sap/gbapp_prapproval;mo/LaunchPageCollection from network element in NW Gateway client, getting below error
    <?xml version="1.0" encoding="utf-8" ?>
    - <error xmlns="http://schemas.microsoft.com/ado/2007/08/dataservices/metadata"> 
    <code>GBAPP_APV_MSG/013</code>  
    <message xml:lang="en">Workflow Task Type is not passed as filter criteria</message>  
    - <innererror> 
    <transactionid>9E830DE47F50F17D910F0A4197385754</transactionid>  
    <timestamp>20140717082602.1410000</timestamp>  
    - <Error_Resolution> 
    <SAP_Transaction>Run transaction /IWFND/ERROR_LOG on SAP NW Gateway hub system and search for entries with the timestamp above for more details</SAP_Transaction>  
    <SAP_Note>See SAP Note 1797736 for error analysis (https://service.sap.com/sap/support/notes/1797736)</SAP_Note>  
    </Error_Resolution>
    - <errordetails> 
    - <errordetail> 
    <code>GBAPP_APV_MSG/013</code>  
    <message>Workflow Task Type is not passed as filter criteria</message>  
    <propertyref />  
    <severity>error</severity>  
    </errordetail>
    But, when I checked in NW gateway client with the below URL, I am able to see the PR for approval in user inbox.
    http://xxx/sap/opu/odata/sap/GBAPP_PRAPPROVAL/WorkflowTaskCollection?$filter=TaskType eq'TS00007986'
    Regards,
    Srikanth

  • How to maintain a template in Bex analyser

    hi all,
    in our comapny presently using Dashboard reports for daily reports where there will be lot of manual work.i have automated most the dashboard part.but in some cases iam unable to automate where the data will keep changing every month.can i create a template in Bex analyser so that no need to upload that data manualy in designer end.is there any option like that?please help me in this issue.
    regards,
    Vamshi D Krishna

    not yet answered

  • Help. Windows 7: The application was unable to start correctly (0xc0150002).

    I just got a new computer. Windows 7. Toshiba. Intel 13-3110M Processor. 6GB DDR3 Memory. 1TB 5400rpm Hard Drive. Intel HD Graphics 4000. 2.40 GHz. 64-bit operating system.
    I installed CS5 Creative Suite on it (which worked perfectly fine on my two previous computers--Windows 7 and Windows 8). Since then Photoshop and Illustrator have been giving me the same error message. "The application was unable to start correctly (0xc0150002). Click OK to close the application." The programs still open and remain open after pressing okay, but the message comes back every minute or so.
    Then, with InDesign, the program won't open at all. It gives me the error message of "Cannot load the PDF.RPLN plug-in. It is dependent on the EPS PAGE ITEM.RPLN plug-in, which failed to load. Please check documentation for the EPS PAGE ITEM.RPLN plug-in." Then InDesign stops responding and closes itself.
    I have to live with this computer for two more weeks (and then I go home and can use my old one again/return this current laptop), and I have schoolwork that counts on me being able to use these programs. If anybody could help me, I would be super grateful!
    Oh, and I've already tried installing and uninstalling it.

    Without system information nobody can say anything. also check the logs in the Event Viewer.
    Mylenium

  • Error when starting Bex analyzer

    Hi All!
    We have a world wide BW-SEM application. In one country they get the following error message when starting Bex analyzer:
    <install error> Missing ActiveX component: Business Explorer Global Services
    Does anyone have a hint on what to do?
    Thanks for your help!
    Best Regards
    Pontus

    hi
    try to check with SAPBEXC.xla
    and take a look oss note 585643
    may need to manual register .dll with regsvr32
    Do an Installation check of the BEx Analyzer as follows:
    In the bex analyzer menu, Business explorer -> Installation Check -> Once the excel sheet opens, press the start button to start the check. Check the entries in red to see any missing/old ocx, dlls.

  • Unable to start photoshop CC 2014. Error 0xC0000076. Help please?

    I downloaded photoshop CC 2014 but when I start the application. A dialog saying, "This application was unable to start correctly. Error 0xC0000076." I am using Window 7. Anyone has the same problem? Anyone has a solution too?

    After spending half a day on Adobe forum and Adobe's online support chat, no solution was found. Finally figured it on my own. I went to Microsoft site and downloaded the Visual C++ Redistributable for Visual Studio 2012 Update 4 for x86 and x64. When the download is complete, click on the exe file. It will ask you whether you want to repair or uninstall. Click on repair.
    After the repair, Photoshop CC 2014 starts normal. Hope this will work for you as well.

  • Unable to start the managed server on OBIEE11.1.1.6.0, Oracle RTD exception

    Hi
    I am unable to start the Managed server on OBIEE 11.1.1.6.0 , as it is giving the following exception
    "[bi_server1] [NOTIFICATION] [] [oracle.wsm.security.policy.scenario.executor.SecurityScenarioExecutor] [tid: RTD_Worker_9] [userId: <anonymous>] [ecid: 0000JxpZwaCDkZ__xPWByW1Hm1HW000001,1:23440] [APP: OracleRTD#11.1.1] [WSM_POLICY_NAME: oracle/wss_username_token_client_policy] Recipient Alias property not configured in the policy. Defaulting to encrypting with signers certificate.
    Here I am providing the bi_server1.log, bi_server1.out log,bi_server1-diagnostic.log
    Please suggest me workaround to resolve this issue,
    thanks in advance
    Pavan
    bi_server1.log
    ==========
    ####<Jun 24, 2013 12:41:40 PM AST> <Info> <WebLogicServer> <10.11.34.111> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1372066900822> <BEA-000000> <WebLogic Server "bi_server1" version:
    WebLogic Server 10.3.5.0  Fri Apr 1 20:20:06 PDT 2011 1398638  Copyright (c) 1995, 2009, Oracle and/or its affiliates. All rights reserved.>
    ####<Jun 24, 2013 12:41:40 PM AST> <Notice> <Log Management> <10.11.34.111> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1372066900902> <BEA-170019> <The server log file /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/servers/bi_server1/logs/bi_server1.log is opened. All server side log events will be written to this file.>
    ####<Jun 24, 2013 12:41:40 PM AST> <Info> <Log Management> <10.11.34.111> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1372066900906> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.>
    ####<Jun 24, 2013 12:41:40 PM AST> <Info> <Diagnostics> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066900981> <BEA-320001> <The ServerDebug service initialized successfully.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901098> <BEA-002622> <The protocol "t3" is now configured.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901098> <BEA-002622> <The protocol "t3s" is now configured.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901099> <BEA-002622> <The protocol "http" is now configured.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901099> <BEA-002622> <The protocol "https" is now configured.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901100> <BEA-002622> <The protocol "iiop" is now configured.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901101> <BEA-002622> <The protocol "iiops" is now configured.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901102> <BEA-002622> <The protocol "ldap" is now configured.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901102> <BEA-002622> <The protocol "ldaps" is now configured.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901106> <BEA-002622> <The protocol "cluster" is now configured.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901107> <BEA-002622> <The protocol "clusters" is now configured.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901109> <BEA-002622> <The protocol "snmp" is now configured.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901109> <BEA-002622> <The protocol "admin" is now configured.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901109> <BEA-002624> <The administration protocol is "t3s" and is now configured.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <RJVM> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901133> <BEA-000570> <Network Configuration for Channel "bi_server1"
    Listen Address   :9704
    Public Address   N/A
    Http Enabled   true
    Tunneling Enabled  false
    Outbound Enabled  false
    Admin Traffic Enabled  true>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901212> <BEA-002609> <Channel Service initialized.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Socket> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901243> <BEA-000415> <System has file descriptor limits of - soft: 4,096, hard: 4,096>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Socket> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901243> <BEA-000416> <Using effective file descriptor limit of: 4,096 open sockets/files.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Socket> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901244> <BEA-000406> <PosixSocketMuxer was built on Jan 10 2008 23:07:45>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Socket> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901301> <BEA-000436> <Allocating 4 reader threads.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Socket> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901302> <BEA-000446> <Native IO Enabled.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <IIOP> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901427> <BEA-002014> <IIOP subsystem enabled.>
    ####<Jun 24, 2013 12:41:47 PM AST> <Info> <Security> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066907382> <BEA-090894> <Successfully loaded the OPSS Policy Provider using oracle.security.jps.internal.policystore.JavaPolicyProvider.>
    ####<Jun 24, 2013 12:41:47 PM AST> <Info> <Security> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066907849> <BEA-000000> <Starting OpenJPA 1.1.1-SNAPSHOT>
    ####<Jun 24, 2013 12:41:48 PM AST> <Info> <Security> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066908041> <BEA-000000> <StoreServiceImpl.initJDO - StoreService is initialized with Id = ldap_LVk1d2v3EBrlDS/rSIpIRiGgLnM=>
    ####<Jun 24, 2013 12:41:48 PM AST> <Info> <Security> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066908346> <BEA-090516> <The RoleMapper provider has preexisting LDAP data.>
    ####<Jun 24, 2013 12:41:48 PM AST> <Info> <Security> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066908755> <BEA-090516> <The Authorizer provider has preexisting LDAP data.>
    ####<Jun 24, 2013 12:41:49 PM AST> <Info> <Security> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066909006> <BEA-090516> <The CredentialMapper provider has preexisting LDAP data.>
    ####<Jun 24, 2013 12:41:49 PM AST> <Info> <Security> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066909180> <BEA-090093> <No pre-WLS 8.1 Keystore providers are configured for server bi_server1 for security realm myrealm.>
    ####<Jun 24, 2013 12:41:49 PM AST> <Notice> <Security> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066909181> <BEA-090082> <Security initializing using security realm myrealm.>
    ####<Jun 24, 2013 12:41:49 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066909747> <BEA-002622> <The protocol "[iiop, ldap, http, https, ldaps, cluster-broadcast, admin, iiops, t3s, cluster-broadcast-secure, snmp, t3]" is now configured.>
    ####<Jun 24, 2013 12:41:49 PM AST> <Info> <XML> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066909759> <BEA-130036> <Initializing XMLRegistry.>
    ####<Jun 24, 2013 12:41:49 PM AST> <Info> <messaging.interception> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066909771> <BEA-400000> <Initializing message interception service>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <Store> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910180> <BEA-280008> <Opening the persistent file store "_WLS_bi_server1" for recovery: directory=/app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/servers/bi_server1/data/store/default requestedWritePolicy="Direct-Write" fileLockingEnabled=true driver="wlfileio3".>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <Store> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910314> <BEA-280009> <The persistent file store "_WLS_bi_server1" (fb352aa7-3e6f-4655-b314-8b2cf7d9caa3) has been opened: blockSize=4,096 actualWritePolicy="Direct-Write(read-buffered)" explicitIOEnforced=false records=109.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910462> <BEA-001135> <Initializing the JDBC service.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910473> <BEA-001137> <Initialization complete.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910474> <BEA-001138> <Resuming the JDBC service.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910474> <BEA-001140> <Resume complete.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <Connector> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910507> <BEA-190000> <Initializing J2EE Connector Service......>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <Connector> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910510> <BEA-190001> <J2EE Connector Service initialized successfully>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910593> <BEA-040305> <JMS service is initialized and in standby mode.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910637> <BEA-040090> <Deployed 8 default connection factories.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910638> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory2" with its JNDI name "weblogic.jms.XAConnectionFactory2" is started.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910638> <BEA-040407> <Default connection factory "MessageDrivenBeanConnectionFactory" with its JNDI name "weblogic.jms.MessageDrivenBeanConnectionFactory" is started.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910639> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory" with its JNDI name "weblogic.jms.XAConnectionFactory" is started.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910639> <BEA-040407> <Default connection factory "DefaultConnectionFactory" with its JNDI name "weblogic.jms.ConnectionFactory" is started.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910639> <BEA-040407> <Default connection factory "QueueConnectionFactory" with its JNDI name "javax.jms.QueueConnectionFactory" is started.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910640> <BEA-040407> <Default connection factory "TopicConnectionFactory" with its JNDI name "javax.jms.TopicConnectionFactory" is started.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910640> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory0" with its JNDI name "weblogic.jms.XAConnectionFactory0" is started.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910640> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory1" with its JNDI name "weblogic.jms.XAConnectionFactory1" is started.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910641> <BEA-040306> <JMS service is active now.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <HTTP> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910680> <BEA-101128> <Initializing HTTP services.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <HTTP> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910697> <BEA-101135> <bi_server1 is the default Web server.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <HTTP> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910697> <BEA-101052> <[HttpServer (defaultWebserver) name: bi_server1] Initialized>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <HTTP> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910700> <BEA-101129> <Initializing the Web application container.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <WTC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910746> <BEA-180046> <INFO: Logging service enabled.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <WTC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910749> <BEA-180046> <INFO: TC Configuration Helper instantiated!>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <WTC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910750> <BEA-180046> <INFO: TC Task Manager instantiated!>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <WTC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910753> <BEA-180046> <INFO: TC security service instantiated!>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <WTC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910756> <BEA-180046> <INFO: TC Outbound routing service instantiated!>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <WTC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910758> <BEA-180046> <INFO: TC Transaction service instantiated!>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <WebService> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910770> <BEA-220031> <The server does not support reliable SOAP messaging.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <WebService> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910771> <BEA-220027> <Web Service reliable agents are started on the server.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMX> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910888> <BEA-149512> <JMX Connector Server started at service:jmx:iiop://10.11.34.111:9704/jndi/weblogic.management.mbeanservers.runtime .>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <WebLogicServer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910904> <BEA-000256> <Invoking oracle.jrf.wls.JRFStartup.main(null)>
    ####<Jun 24, 2013 12:41:51 PM AST> <Info> <WebLogicServer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066911658> <BEA-000256> <Invoking oracle.security.jps.wls.JpsWlsStartupClass.main(null)>
    ####<Jun 24, 2013 12:41:51 PM AST> <Info> <WebLogicServer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066911696> <BEA-000256> <Invoking oracle.core.ojdl.weblogic.ODLConfiguration.main(null)>
    ####<Jun 24, 2013 12:41:52 PM AST> <Info> <WebLogicServer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JxpZtZhDkZ__xPWByW1Hm1HW000000> <1372066912880> <BEA-000256> <Invoking oracle.jrf.AppContextStartup.main(null)>
    ####<Jun 24, 2013 12:41:52 PM AST> <Info> <WebLogicServer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JxpZtZhDkZ__xPWByW1Hm1HW000000> <1372066912883> <BEA-000256> <Invoking oracle.as.jmx.framework.wls.spi.StartupListener.main(null)>
    ####<Jun 24, 2013 12:41:52 PM AST> <Info> <WebLogicServer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JxpZtZhDkZ__xPWByW1Hm1HW000000> <1372066912942> <BEA-000256> <Invoking oracle.j2ee.ws.server.WebServiceServerStartup.main(null)>
    ####<Jun 24, 2013 12:41:52 PM AST> <Info> <WebLogicServer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JxpZtZhDkZ__xPWByW1Hm1HW000000> <1372066912956> <BEA-000256> <Invoking oracle.ias.cache.Startup.main(null)>
    ####<Jun 24, 2013 12:41:52 PM AST> <Info> <WebLogicServer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JxpZtZhDkZ__xPWByW1Hm1HW000000> <1372066912959> <BEA-000256> <Invoking oracle.dms.wls.DMSStartup.main(null)>
    ####<Jun 24, 2013 12:41:53 PM AST> <Info> <Management> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066913225> <BEA-141278> <Java entropy configuration is: System property "java.security.egd= null"; JRE's java.security file property "securerandom.source= null"; Assumed Blocking Config= true; JDK version= 1.6.0; Operating System= AIX.>
    ####<Jun 24, 2013 12:41:53 PM AST> <Info> <Management> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066913226> <BEA-141279> <Detected BLOCKING java entropy configuration. This is the most secure setting, but may cause performance issues on machines with few sources of entropy.>
    ####<Jun 24, 2013 12:41:53 PM AST> <Info> <Management> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066913228> <BEA-141187> <Java system properties are defined as follows:
    EPM_ORACLE_HOME = /app1/orabi/Oracle/Middleware/Oracle_BI1
    EPM_ORACLE_INSTANCE = novalue
    EPM_REG_PROPERTIES_PATH = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/config/fmwconfig
    HYPERION_HOME = /app1/orabi/Oracle/Middleware/Oracle_BI1
    XDO_FONT_DIR = /app1/orabi/Oracle/Middleware/Oracle_BI1/common/fonts
    bi.oracle.home = /app1/orabi/Oracle/Middleware/Oracle_BI1
    com.ibm.cpu.endian = big
    com.ibm.oti.configuration = scar
    com.ibm.oti.jcl.build = 20110622_1654
    com.ibm.oti.shared.enabled = false
    com.ibm.oti.vm.bootstrap.library.path = /usr/java6_64/jre/lib/ppc64/default:/usr/java6_64/jre/lib/ppc64
    com.ibm.oti.vm.library.version = 24
    com.ibm.vm.bitmode = 64
    common.components.home = /app1/orabi/Oracle/Middleware/oracle_common
    domain.home = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1
    em.oracle.home = /app1/orabi/Oracle/Middleware/oracle_common
    epm.useApplicationContextId = false
    file.encoding = utf-8
    file.separator = /
    hyperion.home = /app1/orabi/Oracle/Middleware/Oracle_BI1
    ibm.signalhandling.rs = false
    ibm.signalhandling.sigchain = true
    ibm.signalhandling.sigint = true
    ibm.system.encoding = ISO8859-1
    igf.arisidbeans.carmlloc = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/config/fmwconfig/carml
    igf.arisidstack.home = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/config/fmwconfig/arisidprovider
    java.assistive = ON
    java.awt.graphicsenv = sun.awt.X11GraphicsEnvironment
    java.awt.headless = true
    java.awt.printerjob = sun.print.PSPrinterJob
    java.class.path = /app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.jdbc_11.1.1/ojdbc6dms.jar:/app1/orabi/Oracle/Middleware/Oracle_BI1/bifoundation/jdbc/jdk16/bijdbc.jar::/app1/orabi/Oracle/Middleware/patch_wls1035/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/app1/orabi/Oracle/Middleware/patch_ocp360/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/usr/java6_64/lib/tools.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/app1/orabi/Oracle/Middleware/modules/features/weblogic.server.modules_10.3.5.0.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/app1/orabi/Oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/app1/orabi/Oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.dms_11.1.1/dms.jar:/app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.jmx_11.1.1/jmxframework.jar:/app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.jmx_11.1.1/jmxspi.jar:/app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.odl_11.1.1/ojdl.jar:/app1/orabi/Oracle/Middleware/oracle_common/soa/modules/commons-cli-1.1.jar:/app1/orabi/Oracle/Middleware/oracle_common/soa/modules/oracle.soa.mgmt_11.1.1/soa-infra-mgmt.jar:/app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrf.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/common/derby/lib/derbyclient.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/xqrl.jar:/app1/orabi/Oracle/Middleware/patch_wls1035/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/app1/orabi/Oracle/Middleware/patch_ocp360/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/usr/java6_64/lib/tools.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/app1/orabi/Oracle/Middleware/modules/features/weblogic.server.modules_10.3.5.0.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/app1/orabi/Oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/app1/orabi/Oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar::/app1/orabi/Oracle/Middleware
    java.class.version = 50.0
    java.compiler = j9jit24
    java.endorsed.dirs = /usr/java6_64/jre/lib/endorsed
    java.ext.dirs = /usr/java6_64/jre/lib/ext
    java.fullversion = JRE 1.6.0 IBM J9 2.4 AIX ppc64-64 jvmap6460sr9-20110624_85526 (JIT enabled, AOT enabled)
    J9VM - 20110624_085526
    JIT  - r9_20101028_17488ifx17
    GC   - 20101027_AA
    java.home = /usr/java6_64/jre
    java.io.tmpdir = /tmp/
    java.jcl.version = 20110530_01
    java.library.path = /usr/java6_64/jre/lib/ppc64/default:/usr/java6_64/jre/lib/ppc64:/usr/java6_64/jre/lib/ppc64:/usr/java6_64/jre/lib/ppc64/default:/usr/java6_64/jre/lib/ppc64/j9vm:/usr/java6_64/jre/lib/ppc64:/usr/java6_64/jre/../lib/ppc64:/app1/orabi/Oracle/Middleware/patch_wls1035/profiles/default/native:/app1/orabi/Oracle/Middleware/patch_ocp360/profiles/default/native:/usr/java6_64/jre/lib/ppc64/j9vm:/usr/java6_64/jre/lib/ppc64:/usr/java6_64/jre/../lib/ppc64:/app1/orabi/Oracle/Middleware/patch_wls1035/profiles/default/native:/app1/orabi/Oracle/Middleware/patch_ocp360/profiles/default/native:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/native/aix/ppc64:/usr/lib:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/native/aix/ppc64:/usr/lib:/usr/lib
    java.naming.factory.initial = weblogic.jndi.WLInitialContextFactory
    java.naming.factory.url.pkgs = weblogic.jndi.factories:weblogic.corba.j2ee.naming.url:weblogic.jndi.factories:weblogic.corba.j2ee.naming.url
    java.protocol.handler.pkgs = oracle.mds.net.protocol|weblogic.net
    java.runtime.name = Java(TM) SE Runtime Environment
    java.runtime.version = pap6460sr9fp2-20110627_03 (SR9 FP2)
    java.security.policy = /app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.policy
    java.specification.name = Java Platform API Specification
    java.specification.vendor = Sun Microsystems Inc.
    java.specification.version = 1.6
    java.util.logging.config.class = oracle.core.ojdl.logging.LoggingConfiguration
    java.util.prefs.PreferencesFactory = java.util.prefs.FileSystemPreferencesFactory
    java.vendor = IBM Corporation
    java.vendor.url = http://www.ibm.com/
    java.version = 1.6.0
    java.vm.info = JRE 1.6.0 IBM J9 2.4 AIX ppc64-64 jvmap6460sr9-20110624_85526 (JIT enabled, AOT enabled)
    J9VM - 20110624_085526
    JIT  - r9_20101028_17488ifx17
    GC   - 20101027_AA
    java.vm.name = IBM J9 VM
    java.vm.specification.name = Java Virtual Machine Specification
    java.vm.specification.vendor = Sun Microsystems Inc.
    java.vm.specification.version = 1.0
    java.vm.vendor = IBM Corporation
    java.vm.version = 2.4
    javax.management.builder.initial = weblogic.management.jmx.mbeanserver.WLSMBeanServerBuilder
    javax.rmi.CORBA.PortableRemoteObjectClass = weblogic.iiop.PortableRemoteObjectDelegateImpl
    javax.rmi.CORBA.UtilClass = weblogic.iiop.UtilDelegateImpl
    javax.xml.rpc.ServiceFactory = weblogic.webservice.core.rpc.ServiceFactoryImpl
    javax.xml.soap.MessageFactory = weblogic.webservice.core.soap.MessageFactoryImpl
    jrf.version = 11.1.1
    jrockit.optfile = /app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrocket_optfile.txt
    jxe.current.romimage.version = 15
    jxe.lowest.romimage.version = 15
    oracle.biee.search.bisearchproperties = /app1/orabi/Oracle/Middleware/Oracle_BI1/bifoundation/jee/BISearchConfig.properties
    oracle.core.ojdl.logging.applicationcontextprovider = oracle.core.ojdl.logging.WlsApplicationContextImpl
    oracle.core.ojdl.logging.componentId = bi_server1
    oracle.core.ojdl.logging.config.file = /app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.ovd_11.1.1/templates/ovd-logging.xml
    oracle.core.ojdl.logging.usercontextprovider = oracle.core.ojdl.logging.WlsUserContextImpl
    oracle.deployed.app.dir = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/servers/bi_server1/tmp/_WL_user
    oracle.deployed.app.ext = /-
    oracle.domain.config.dir = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/config/fmwconfig
    oracle.ecsf.configuration.class = oracle.biee.search.services.BISearchServiceConfiguration
    oracle.ecsf.security.service = oracle.biee.search.security.BISearchSecurityService
    oracle.notification.filewatching.interval = 2000
    oracle.security.jps.config = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/config/fmwconfig/jps-config.xml
    oracle.server.config.dir = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/config/fmwconfig/servers/bi_server1
    org.apache.commons.logging.Log = org.apache.commons.logging.impl.Jdk14Logger
    org.omg.CORBA.ORBClass = weblogic.corba.orb.ORB
    org.omg.CORBA.ORBSingletonClass = weblogic.corba.orb.ORB
    org.xml.sax.driver = weblogic.xml.jaxp.RegistryXMLReader
    org.xml.sax.parser = weblogic.xml.jaxp.RegistryParser
    os.arch = ppc64
    os.encoding = ISO8859-1
    os.name = AIX
    os.version = 6.1
    path.separator = :
    platform.home = /app1/orabi/Oracle/Middleware/wlserver_10.3
    rtd.instanceName = RTD_bi_server1
    server.group = obi
    sun.arch.data.model = 64
    sun.boot.class.path = /usr/java6_64/jre/lib/ppc64/default/jclSC160/vm.jar:/usr/java6_64/jre/lib/annotation.jar:/usr/java6_64/jre/lib/beans.jar:/usr/java6_64/jre/lib/java.util.jar:/usr/java6_64/jre/lib/jndi.jar:/usr/java6_64/jre/lib/logging.jar:/usr/java6_64/jre/lib/security.jar:/usr/java6_64/jre/lib/sql.jar:/usr/java6_64/jre/lib/ibmorb.jar:/usr/java6_64/jre/lib/ibmorbapi.jar:/usr/java6_64/jre/lib/ibmcfw.jar:/usr/java6_64/jre/lib/rt.jar:/usr/java6_64/jre/lib/charsets.jar:/usr/java6_64/jre/lib/resources.jar:/usr/java6_64/jre/lib/ibmpkcs.jar:/usr/java6_64/jre/lib/ibmcertpathfw.jar:/usr/java6_64/jre/lib/ibmjgssfw.jar:/usr/java6_64/jre/lib/ibmjssefw.jar:/usr/java6_64/jre/lib/ibmsaslfw.jar:/usr/java6_64/jre/lib/ibmjcefw.jar:/usr/java6_64/jre/lib/ibmjgssprovider.jar:/usr/java6_64/jre/lib/ibmjsseprovider2.jar:/usr/java6_64/jre/lib/ibmcertpathprovider.jar:/usr/java6_64/jre/lib/ibmxmlcrypto.jar:/usr/java6_64/jre/lib/management-agent.jar:/usr/java6_64/jre/lib/xml.jar:/usr/java6_64/jre/lib/jlm.jar:/usr/java6_64/jre/lib/javascript.jar
    sun.boot.library.path = /usr/java6_64/jre/lib/ppc64/default:/usr/java6_64/jre/lib/ppc64
    sun.io.unicode.encoding = UnicodeBig
    sun.java.command = weblogic.Server
    sun.java.launcher = SUN_STANDARD
    sun.jnu.encoding = ISO8859-1
    user.country = US
    user.dir = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1
    user.home = /home/orabi
    user.language = en
    user.name = orabi
    user.timezone = Asia/Riyadh
    vde.home = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/servers/bi_server1/data/ldap
    weblogic.MaxMessageSize = 50000000
    weblogic.Name = bi_server1
    weblogic.ProductionModeEnabled = true
    weblogic.ReverseDNSAllowed = false
    weblogic.alternateTypesDirectory = /app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.ossoiap_11.1.1,/app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.oamprovider_11.1.1
    weblogic.classloader.preprocessor = weblogic.diagnostics.instrumentation.DiagnosticClassPreProcessor
    weblogic.ext.dirs = /app1/orabi/Oracle/Middleware/patch_wls1035/profiles/default/sysext_manifest_classpath:/app1/orabi/Oracle/Middleware/patch_ocp360/profiles/default/sysext_manifest_classpath
    weblogic.home = /app1/orabi/Oracle/Middleware/wlserver_10.3/server
    weblogic.jdbc.remoteEnabled = false
    weblogic.management.clearTextCredentialAccessEnabled = ********
    weblogic.management.discover = false
    weblogic.management.server = http://10.11.34.111:7001
    weblogic.nodemanager.ServiceEnabled = true
    weblogic.security.SSL.enableJSSE = true
    weblogic.security.SSL.ignoreHostnameVerification = true
    weblogic.security.TrustKeyStore = DemoTrust
    weblogic.system.BootIdentityFile = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/servers/bi_server1/data/nodemanager/boot.properties
    wls.home = /app1/orabi/Oracle/Middleware/wlserver_10.3/server
    wlw.iterativeDev = false
    wlw.logErrorsToConsole = false
    wlw.testConsole = false
    xdo.server.config.dir = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/config/bipublisher
    >
    ####<Jun 24, 2013 12:41:53 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066913766> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "bea_wls_internal">
    ####<Jun 24, 2013 12:41:54 PM AST> <Notice> <WebLogicServer> <10.11.34.111> <bi_server1> <main> <<WLS Kernel>> <> <> <1372066914573> <BEA-000365> <Server state changed to STANDBY>
    ####<Jun 24, 2013 12:41:54 PM AST> <Notice> <WebLogicServer> <10.11.34.111> <bi_server1> <main> <<WLS Kernel>> <> <> <1372066914579> <BEA-000365> <Server state changed to STARTING>
    ####<Jun 24, 2013 12:41:54 PM AST> <Info> <SAFService> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066914605> <BEA-281003> <SAF Service has been initialized.>
    ####<Jun 24, 2013 12:41:54 PM AST> <Info> <SAFService> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066914612> <BEA-281002> <SAF Service has been started.>
    ####<Jun 24, 2013 12:41:54 PM AST> <Info> <WseeCore> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066914622> <BEA-220502> <The Wsee Service is starting>
    ####<Jun 24, 2013 12:41:54 PM AST> <Info> <Deployer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066914743> <BEA-149209> <Resuming.>
    ####<Jun 24, 2013 12:41:54 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066914823> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "bea_wls9_async_response">
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916264> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "bea_wls_cluster_internal">
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916333> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "bea_wls_deployment_internal">
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916428> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "EPMSystemRegistry">
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916440> <BEA-001177> <Creating Connection Pool named EPMSystemRegistry, URL = jdbc:oracle:thin:@ebspocapp:1521/EBPRD, Properties = user=DEV_BIPLATFORM;oracle.net.CONNECT_TIMEOUT=10000;.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <Common> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916455> <BEA-000626> <Free resources in pool "EPMSystemRegistry" will be tested every "300" seconds.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916577> <BEA-001124> <Created Connection Pool named EPMSystemRegistry.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916591> <BEA-001174> <Creating Data Source named EPMSystemRegistry, JNDI Name = jdbc/EPMSystemRegistry.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916642> <BEA-001512> <Data Source EPMSystemRegistry has been successfully created.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916644> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "bip_datasource">
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916652> <BEA-001177> <Creating Connection Pool named bip_datasource, URL = jdbc:oracle:thin:@ebspocapp:1521/EBPRD, Properties = user=DEV_BIPLATFORM;oracle.net.CONNECT_TIMEOUT=10000;.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <Common> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916654> <BEA-000626> <Free resources in pool "bip_datasource" will be tested every "300" seconds.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916655> <BEA-001124> <Created Connection Pool named bip_datasource.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916656> <BEA-001174> <Creating Data Source named bip_datasource, JNDI Name = jdbc/bip_datasource.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916676> <BEA-001512> <Data Source bip_datasource has been successfully created.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916678> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "mds-owsm">
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916687> <BEA-001177> <Creating Connection Pool named mds-owsm, URL = jdbc:oracle:thin:@ebspocapp:1521/EBPRD, Properties = SendStreamAsBlob=true;user=DEV_MDS;oracle.net.CONNECT_TIMEOUT=10000;.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <Common> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916688> <BEA-000626> <Free resources in pool "mds-owsm" will be tested every "300" seconds.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916690> <BEA-001124> <Created Connection Pool named mds-owsm.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916691> <BEA-001174> <Creating Data Source named mds-owsm, JNDI Name = jdbc/mds/owsm.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916726> <BEA-001512> <Data Source mds-owsm has been successfully created.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916728> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "rtd_datasource">
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916735> <BEA-001177> <Creating Connection Pool named rtd_datasource, URL = jdbc:oracle:thin:@ebspocapp:1521/EBPRD, Properties = user=DEV_BIPLATFORM;oracle.net.CONNECT_TIMEOUT=10000;.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <Common> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916736> <BEA-000626> <Free resources in pool "rtd_datasource" will be tested every "300" seconds.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916738> <BEA-001124> <Created Connection Pool named rtd_datasource.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916740> <BEA-001174> <Creating Data Source named rtd_datasource, JNDI Name = SDDS.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916757> <BEA-001512> <Data Source rtd_datasource has been successfully created.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <Store> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916922> <BEA-280008> <Opening the persistent file store "BipJmsStore" for recovery: directory=/app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/BipJmsStore requestedWritePolicy="Direct-Write" fileLockingEnabled=true driver="wlfileio3".>
    ####<Jun 24, 2013 12:41:57 PM AST> <Info> <Store> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066917017> <BEA-280009> <The persistent file store "BipJmsStore" (68f997df-e4a0-4eb1-9497-8d994726f787) has been opened: blockSize=4,096 actualWritePolicy="Direct-Write(read-buffered)" explicitIOEnforced=false records=16.>
    ####<Jun 24, 2013 12:41:57 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066917027> <BEA-040321> <JMSServer "BipJmsServer" is resuming.>
    ####<Jun 24, 2013 12:41:57 PM AST> <Info> <Messaging> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066917092> <BEA-282003> <The messaging kernel BipJmsServer will use up to 536,870,912 bytes of memory before paging begins>
    ####<Jun 24, 2013 12:41:57 PM AST> <Info> <Messaging> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066917115> <BEA-282001> <The messaging kernel BipJmsServer is beginning recovery of its persistent state>
    ####<Jun 24, 2013 12:41:57 PM AST> <Info> <Messaging> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066917158> <BEA-282002> <The messaging kernel BipJmsServer has recovered 0 persistent messages>
    ####<Jun 24, 2013 12:41:57 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066917200> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "BipJmsResource">
    ####<Jun 24, 2013 12:41:57 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066917408> <BEA-040406> <Distributed destination "BipJmsResource!BIP.Burst.Job.Q" is started.>
    ####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921006> <BEA-040406> <Distributed destination "BipJmsResource!BIP.Burst.Report.Q" is started.>
    ####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921044> <BEA-040406> <Distributed destination "BipJmsResource!BIP.Delivery.Email.Q" is started.>
    ####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921063> <BEA-040406> <Distributed destination "BipJmsResource!BIP.Delivery.File.Q" is started.>
    ####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921078> <BEA-040406> <Distributed destination "BipJmsResource!BIP.Delivery.FTP.Q" is started.>
    ####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921091> <BEA-040406> <Distributed destination "BipJmsResource!BIP.Delivery.Print.Q" is started.>
    ####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921107> <BEA-040406> <Distributed destination "BipJmsResource!BIP.Delivery.WebDAV.Q" is started.>
    ####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921125> <BEA-040406> <Distributed destination "BipJmsResource!BIP.Delivery.Fax.Q" is started.>
    ####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921143> <BEA-040406> <Distributed destination "BipJmsResource!BIP.System.T" is started.>
    ####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921170> <BEA-040108> <User connection factory "BipJmsResource!BIP.JMS.CF" is started.>
    ####<Jun 24, 2013 12:42:01 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921185> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "Module-FMWDFW">
    ####<Jun 24, 2013 12:42:01 PM AST> <Info> <Diagnostics> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921232> <BEA-320114> <Initializing the Diagnostics Harvester.>
    ####<Jun 24, 2013 12:42:01 PM AST> <Info> <Diagnostics> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921241> <BEA-320117> <The Harvester is being disabled because there are no Harvestable types configured specified.>
    ####<Jun 24, 2013 12:42:01 PM AST> <Info> <Diagnostics> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921245> <BEA-320119> <The Harvester is now in a inactive state.>
    ####<Jun 24, 2013 12:42:01 PM AST> <Info> <J2EE> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921715> <BEA-160151> <Registered library Extension-Name: UIX, Specification-Version: 11, Implementation-Version: 11.1.1.1.0 (WAR).>
    ####<Jun 24, 2013 12:42:01 PM AST> <Info> <J2EE> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921841> <BEA-160151> <Registered library Extension-Name: adf.oracle.businesseditor, Specification-Version: 1, Implementation-Version: 11.1.1.2.0 (WAR).>
    ####<Jun 24, 2013 12:42:02 PM AST> <Info> <J2EE> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066922111> <BEA-160151> <Registered library Extension-Name: adf.oracle.domain, Specification-Version: 1, Implementation-Version: 11.1.1.2.0 (EAR).>
    ####<Jun 24, 2013 12:42:02 PM AST> <Info> <J2EE> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066922334> <BEA-160151> <Registered library Extension-Name: adf.oracle.domain.webapp, Specification-Version: 1, Implementation-Version: 11.1.1.2.0 (WAR).>
    ####<Jun 24, 2013 12:42:02 PM AST> <Info> <J2EE> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066922391> <BEA-160151> <Registered library Extension-Name: bithirdparty, Specification-Version: 11.1.1 (JAR).>
    ####<Jun 24, 2013 12:42:02 PM AST> <Info> <J2EE> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <13

    Hi,
    I tried starting the server from the console as well as from command prompt. Here I am giving the command below.
    nohup ./startManagedWebLogic.sh bi_server1 t3://machineIP:portNo > bis1_startup.log &
    But each time I got the same exception.
    Korandla

Maybe you are looking for

  • Error in import in phase TOOLIMPD3

    Hi all, I am posting with a problem I have just encountered upgrading my Dev 46C system to ECC. I didn't encounter this upgrading my sandbox. During the prepare phases, I encounter an error in the phase TOOLIMPD3: ERROR: tp terminated with error stat

  • Importing Themes from iDVD or iMoveHD

    I have been having trouble importing Themes into Final Cut Express and I am going to assume that I am missing something in order to do this. Can anyone give me assistance on how to do this or if it is even possible? Thanks

  • [SOLVED] Firefox 17.0.1 not really updated

    I have archlinux 32 bits and I use firefox, I notice despite the installation of the firefox 17.0.1 package my version of firefox is still 17.0 ( file date is 20 nov 2012 in /usr/lib/firefox but it should be 1 dec 2012 ), is it normal ? I tried to re

  • ICloud plays all music on iPhone even when synched not to

    Since downloading Yosemite on my MacBook Pro (early 2011), I have been unable to create my music library for listening in the car on my Iphone 6 via blue tooth.  I have checked the songs I want to include, synched my phone and thought I was good but

  • Trouble with wifi and swtiching to 4g networks

    I having problems with iphone 5 and network issues. While on wi-fi is constantly turning on adn off adn it is frustating.. when not in wi-fi.. it basically does not do nothing.... I dont get to see the 4G