Unable to start BPm process
Hi
I have a process model with a start process (wsdl which takes some inputs) and then next task assigned to a dynamic user based on inputs in start process.
While I try to start the process manually from nwa by giving inputs i see teh error "Failed to start the process; Process manager adapter may not be started; error= com.sap.glx.adapter.api.AdapterException: Process start failed due to TransitionException"
This error pops up randomly whenever I change some user mapping at the second level task (not start process and next task)
Any clues?
Regards
Lavanya
Hi Lavanya,
Could you please tell me how you resolved. I am also getting same error.
com.sap.glx.adapter.api.AdapterException: Process start failed due to TransitionException
Thanks in advance.
cheers,
dev
Similar Messages
-
Oracel BPm Question: Unable to start BPM Process Web Service
Hello,
I was trying to create a new webservice interface for a BPM proces. However When I try to access the WSDL I ran into this issue:
The WSDL is supposed to be located at:
http://localhost:7001/albpmServices/albpmengine/ws/NewUserServiceListener?wsdl=true
Error 500--Internal Server Error
java.lang.NullPointerException
at fuego.webservices.HttpSoapListener.process(HttpSoapListener.java:176)
at fuego.ejbengine.servlet.SoapServlet.doPost(SoapServlet.java:75)
at fuego.ejbengine.servlet.SoapServlet.doGet(SoapServlet.java:62)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:226)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:124)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3395)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2140)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2046)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)For Oracle BPM 10g and 6.0 running on Enterprise WebLogic try:
http://{WebLogicMachineName}:{WebLogic Port}/albpmServices/{Engine-name}/ws
Replace the {WebLogicMachineName} and} {WebLogic Port} with your WebLogic host and port. Replace the {EngineName} with the BPM engine name shown in the Oracle BPM admin console under Engines.
Dan -
Unable to Trigger BPM Process from ECC --- Need Help
Hi All,
I have created a BPM and exposed the Process as a web service. Now when ECC team is trying to trigger the BPM through the provided Web Service, they are getting the below error.
Issue is that the messages fails in ECC with the Status u201CSystem Erroru201D and this is due to reason below :
"The RM Source endpoint requests this acknowledgement by including an
<AckRequested> header block in the message. An RM Destination that
receives a message that contains an <AckRequested> header block MUST
respond with a message containing a <SequenceAcknowledgement> header
block" (Web Services Reliable Messaging Protocol 1.0).
Below is the structure of WSDL I gave to the ECC team.
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<wsdl:definitions xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tns="http://www.example.org/NewWSDLFile/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" name="NewWSDLFile" targetNamespace="http://www.example.org/NewWSDLFile/">
<wsdl:types>
<xsd:schema targetNamespace="http://www.example.org/NewWSDLFile/">
<xsd:element name="NewOperation">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="NewValue" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
</wsdl:types>
<wsdl:message name="NewOperationRequest">
<wsdl:part element="tns:NewOperation" name="parameters"/>
</wsdl:message>
<wsdl:portType name="NewWSDLFile">
<wsdl:operation name="NewOperation">
<wsdl:input message="tns:NewOperationRequest"/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="NewWSDLFileSOAP" type="tns:NewWSDLFile">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="NewOperation">
<soap:operation soapAction="http://www.example.org/NewWSDLFile/NewOperation"/>
<wsdl:input>
<soap:body use="literal"/>
</wsdl:input>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="NewWSDLFile">
<wsdl:port binding="tns:NewWSDLFileSOAP" name="NewWSDLFileSOAP">
<soap:address location="http://www.example.org/"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
Please help.This below thread solved my problem.
Start BPM Process Trigger - Read timed out
SrinivaS -
Start bpm process with attachment or note
Hi All
Is there any way to start BPM process and add attachment or note to it.
My client requirement is that when the process is started requester should be able to add file or note.
This note or file should be visible in UWL task (in section attachments or notes)
Is there any way to do it using standard.
I know that I can store note in context of BPM process but customer is really pushing for standard.
RegardsNot sure if the requester is in BPM or outside BPM.
You can do this by keeping requester in BPM i.e. trigger BPM and give requester a task. (Dont think its preferred design).
In UWL you can let user add a memo or attachment... Refer below doc
SAP NetWeaver Business Process Management Resource Center
-Abhijeet
Edited by: Abhijeet on Dec 10, 2011 5:21 AM -
OAS Startup OWS-08820: Unable to start oassrv process 'oassrv'.
Dear OAS Product Manager, Oracle fellows & Developer Guys,
I am using Win NT 4.0 Server, Servie Pack 5 (1280)
on Intel Pentium III 550MHz PC - 256MB ram.
8GB Hard Disk 1 with C,D,E,F drives and
another 4GB Hard Disk with G,H drives,
all with FAT.(I have got Win98 in C:)
I have got:
1) Oracle8 (8.0.4) at D:\ORANT
2) Devloper2000 at D:\ORANT
3) Oracle8i (8.1.6) at G:\Oracle8i
4) JDeveloper 3.1 at F:\JDeveloper 3.1
Then I installed OAS 4.0.8.1 at F:\OAS (after closing
all running Oracle processes) with the "Complete" option.
After reboot, I logged into the Oracle Application
Server Manager, and tried to start "ALL" as mentioned in the
documentation. I got the following message:
Site
Please wait while the command is being processed on host elysium ...
Starting ORB process...
waiting for ORB to be ready...
The command completed successfully on host elysium.
oassrv: Starting wrb service 0
ConfigProvider Server accepting requests...
oassrv: Starting wrb service 1
Log Server is accepting requests now...
oassrv: Starting wrb service 2
PANIC: YS::ERROR::BADFRAME in oassrv at line 66 of
m:\nt_4081_40bit_opt_102099\ows\srchome\ys\src\ys\yse.c
abnormal program termination
OWS-08820: Unable to start oassrv process 'oassrv'.
Initialization Failure- Exiting OAS...
Execute STOP of all the OAS Processes from the OAS Manager
Nothing much is described for this error in the Error Messages section of the documentation.
Please help me out.
Anuj Patel
[email protected]Check if there is no a pid or trace or any file that is created during the start of this kind of process and remove it and try again. As well you may check if there is a java process from the console kill it and start it.
Greetings -
ERROR ORA-12514: TNS: unable to start extract process
Hi Experts,
I have installed Oracle Golden Gate in the below environment.But unable to start extract process
Primary site (source): This is production DB and up and running.
RAC 2 nodes
Oracle RAC 11.2.0.1.0
ASM
Oracle GoldenGate 11g Release 1 (11.1.1.0.0)
Enterprise Linux Server release 5.5 (Carthage)
Processor Type x64
OS 64 bit
target Site (destination):
Standalone single server - Non RAC
Oracle version 11.2.0.1.0
ASM
Oracle GoldenGate 11g Release 1 (11.1.1.0.0)
Enterprise Linux Server release 5.5 (Carthage)
Processor Type x64
OS 64 bit
Getting below error in logs while starting extract process:
RECOVERY: reset to initial or altered checkpoint.
2012-08-05 10:34:10 ERROR OGG-00868 Oracle GoldenGate Capture for Oracle, aaa.prm: Attaching to
ASM server asm: (12514) ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor.
2012-08-05 10:34:10 ERROR OGG-01668 Oracle GoldenGate Capture for Oracle, aaa.prm: PROCESS
ABENDING.[oracle@ ggate]$
Getting below error while connecting with asm instance directly:
[oracle@ admin]$ sqlplus sys@asm as sysasm
SQL*Plus: Release 11.2.0.1.0 Production on Sun Aug 5 11:16:11 2012
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
[oracle@ ~]$ tnsping asm TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 05-AUG-2012 11:55
:42
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = xxx-
scan)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = ASM) (I
NSTANCE_NAME = +ASM1)))
OK (0 msec) Any help Please ?
Regards
LazyDBA
Edited by: LazyDBA11g on Aug 5, 2012 12:14 AM
Edited by: LazyDBA11g on Aug 5, 2012 11:25 PM
Edited by: LazyDBA11g on Aug 12, 2012 4:36 AMHello JK,
Thanks a lot for specific response.
SQL> select INST_ID, NAME, VALUE from gv$parameter where name like '%_listener%';
INST_ID NAME VALUE
1 local_listener (DESCRIPTION=(ADDRESS_LIST=(AD
DRESS=(PROTOCOL=TCP)(HOST=xxx_
data1-vip)(PORT=1521))))
1 remote_listener xxxdata-scan:1521
2 local_listener (DESCRIPTION=(ADDRESS_LIST=(AD
DRESS=(PROTOCOL=TCP)(HOST=xxx_
data2-vip)(PORT=1521))))
2 remote_listener xxxdata-scan:1521
If I add REMOTE_LISTENER pointing to SCAN ip address, Does it require DB bounce ? (Its production DB)
Regards,
LazyDBA
Edited by: LazyDBA11g on Aug 10, 2012 12:01 PM
Edited by: LazyDBA11g on Aug 12, 2012 4:48 AM -
How to start BPM process WSDL from WDA
Hello,
I need to start BPM Process from SRM ECC with WDA; i have been through this link ;
http://forums.sdn.sap.com/thread.jspa?threadID=1643425
also followed the pdf named 'Triggering NetWeaver BPM Process from ABAP' provided from SAP but still stuck on some issues;
- I have a WSDL in order to start BPM process and works fine as i successfully call it from EP Java AS with WDJ..
- What i need to do is to trigg it from SRM Screens so i need to call this WSD from ECC, so;
When i try to create a consumer proxy using external wsdl option, after putting in WSDL Url it throws an error;
Exception occurred in communication framework:Error in HTTP Framework:405 Method Not Allowed http://xxx.local:50000/bpm/de
mosapcom/dccategoryappbpm/StartCatAppSI
Exception of class CX_SLIB_HTTP_FAIL
And this is error from BPM Logs for the same action;
process()
[EXCEPTION]
com.sap.engine.interfaces.webservices.runtime.RuntimeProcessException: com.sap.engine.services.webservices.espbase.server.additions.wsa.WSAddressingException: com.sap.SOA.wsr.030104 - Expected request method POST. Found GET.
at com.sap.engine.services.webservices.espbase.server.additions.SOAPHTTPTransportBinding.getAction(SOAPHTTPTransportBinding.java:581)
at com.sap.engine.services.webservices.espbase.server.runtime.RuntimeProcessingEnvironment.overwriteConfiguration(RuntimeProcessingEnvironment.java:894)
at com.sap.engine.services.webservices.espbase.server.runtime.RuntimeProcessingEnvironment.preProcess(RuntimeProcessingEnvironment.java:469)
Also i found this link : http://wiki.sdn.sap.com/wiki/display/TechTSG/(WSR)Problems-P06/
But no help so far,
So, is there anyone faced similar or the same issue? Any suggestion will be appreciated.
Regards,
YasinHi soujanya,
BPM server is not open to the internet but only intranet, so i will copy the WSDL code for you,
will be glad if you can help;
- <wsdl:definitions xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tns="http://www.koczer.com/StartCatAppSI/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="StartCatAppSI" targetNamespace="http://www.koczer.com/StartCatAppSI/">
- <wsdl:types>
- <xsd:schema targetNamespace="http://www.koczer.com/StartCatAppSI/">
- <xsd:complexType name="DetailsType">
- <xsd:sequence>
<xsd:element name="Category_ID" type="xsd:int" />
<xsd:element name="Category_Text" type="xsd:string" />
<xsd:element name="User" type="xsd:string" />
<xsd:element name="Manager" type="xsd:string" />
</xsd:sequence>
</xsd:complexType>
- <xsd:element name="NewOperation">
- <xsd:complexType>
- <xsd:sequence>
<xsd:element name="Details" type="tns:DetailsType" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
</wsdl:types>
- <wsdl:message name="NewOperationRequest">
<wsdl:part element="tns:NewOperation" name="parameters" />
</wsdl:message>
- <wsdl:portType name="StartCatAppSI">
- <wsdl:operation name="NewOperation">
<wsdl:input message="tns:NewOperationRequest" />
</wsdl:operation>
</wsdl:portType>
- <wsdl:binding name="StartCatAppSISOAP" type="tns:StartCatAppSI">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" />
- <wsdl:operation name="NewOperation">
<soap:operation soapAction="http://www.koczer.com/StartCatAppSI/NewOperation" />
- <wsdl:input>
<soap:body use="literal" />
</wsdl:input>
</wsdl:operation>
</wsdl:binding>
- <wsdl:service name="StartCatAppSI">
- <wsdl:port binding="tns:StartCatAppSISOAP" name="StartCatAppSISOAP">
<soap:address location="http://zerbpmts.koczer.local:50000/bpm/demosapcom/dccategoryappbpm/StartCatAppSI" />
</wsdl:port>
</wsdl:service>
</wsdl:definitions> -
Unable to start Oracle Process Manager from the windows services for OBIEE
Hi,
I have OBIEE 11g installed on a 32-bit windows machine. Of the two windows services installed, I am unable to start the Oracle Process Manager. When I try to start it I get the following error:
Error 1053: The service did not respond to the start or control request in a timely fashion.
At the back end, this service is calling the file opmn.exe which is placed at MIDDLEWAREHOME\Oracle_BI1\opmn\bin. On trying to execute this file the error we get is:
The procedure entry point longjmp could not be located in the dynamic link library orauts.dll
I have tried replacing the orauts.dll file, but to no avail.
Please let me know if you have any clue regarding what is to be done.
Thanks
NamanHi Naman,
This error occurs for the following reasons,
*Path variable is not set properly
*Multiple Oracle homes exists in the same machine.
Follow the below steps and let me know if it works,
1. Select My Computer -> Right Click -> Properties
2. In the System Properties screen go to Advanced Tab
3. Click on Environment Variables
4. In the System Variables section select PATH variable & Click edit
5. Now you will find that it will contain invalid directories. Remove the incorrect entries. This may happen when you have multiple oracle homes in the same machine
6. Restart the service.
Rgds,
Dpka -
How to start BPM Process in Netweaver CE 7.1 from backend
Hi,
since 2 Month i am trying to use SAP Netweaver CE 7.1 EHP1. I found a lot about modelling of business process with process composer.
In my company we are often using SAP Standard Programs/transaktions, thats why I want to start a SAP Netweaver BPM Process from SAP Backend. I think there are more than one way. May be someone can tel me one easy way.
The following systems are available in my Landascape:
- PI 7.1
- ERP 2005
- CE 7.1 EHP1 with ESR
Does someone have an idea how to start the BPM Process or how to trigger start event from Backend?
Greetings,
ManuelHi,
Netweaver BPM process can be started in two ways:
1. Using NWA by instantiating a process
2. Using a Web service which trigers the Start event of the Business Process. You may find this useful:
/people/arafat.farooqui/blog/2009/08/13/introduction-to-sap-netweaver-bpm-part-4
Hope this helps!!
Regards,
Arafat -
How to start BPM Process in Netweaver CE 7.1
Hi,
since 2 Month i am trying to use SAP Netweaver CE 7.1 EHP1. I found a lot about modelling of business process with process composer.
In my company we are often using SAP Standard Programs/transaktions, thats why I want to start a SAP Netweaver BPM Process from SAP Backend. I think there are more than one way. May be someone can tel me one easy way.
The following systems are available in my Landascape:
- PI 7.1
- ERP 2005
- CE 7.1 EHP1 with ESR
Does someone have an idea how to start the BPM Process or how to trigger start event from Backend?
Greetings,
ManuelHi,
Netweaver BPM process can be started in two ways:
1. Using NWA by instantiating a process
2. Using a Web service which trigers the Start event of the Business Process. You may find this useful:
/people/arafat.farooqui/blog/2009/08/13/introduction-to-sap-netweaver-bpm-part-4
Hope this helps!!
Regards,
Arafat -
Error starting BPM process in CE 7.2
Hi Guys,
I created a BPM process and deployed it on CE 7.2 server. When I try to start it from Process Repository , I get following error.
com.sap.tc.bpem.wdui.procstarter.procstarter.comp.ProcStarterComp$MyException: Error :Start event ID is null; Check if the necessary services are started
Start Event and end event are defined.
Any idea what this error is about.
Thanks,
Yomeshhi,
how about other bpm process?
if all are like this, you have to check the bpm service.
Best regards,
John -
Unable to initiate BPM process despite using script task
Hi,
I've created a BPMN process which I want to initiate through a script task - I followed the steps given in section 3.7 of the following doc -
https://stbeehive.oracle.com/content/dav/st/HP%20personal%20workspace/Public%20Documents/BPMN_03_SalesQuote_Implementation.pdf
but after deploying this process, when I go to BPM workspace using my user's login, I don't see my BPM process under list of applications. What could be wrong?
Thanks,
HarshHi Lavanya,
Could you please tell me how you resolved. I am also getting same error.
com.sap.glx.adapter.api.AdapterException: Process start failed due to TransitionException
Thanks in advance.
cheers,
dev -
Start BPM process from ABAP report. Need some investigations.
Hi there!
I have to start a BPM process from ABAP report. I found an article http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10d75b45-7fef-2b10-bc8e-c6012e0a9457?QuickLink=index&overridelayout=true and have done everything it describes but the process doesn't start.
What I've done:
1) Created a service proxy in SE80.
2) Created a logical port in SOAMANAGER.
3) Write a code to start a WebService in ABAP Report.
But when I start a program nothing happens, no errors.
What analysis I did:
1) See logs and traces in SOAMANAGER - there is nothing appears after I start the report.
2) Tried to test connection to my WebService in SM59 - the connection works, but it use a POST method instead of GET:
Error: com.sap.engine.services.webservices.espbase.server.additions.wsa.WSAddressingException: com.sap.SOA.wsr.030104 - Expected request method POST. Found GET.
But I think it is OK and from the report it use a right method.
3) Tried to delete a logical port - the error of communication problem appears. So it means that all settings are right.
4) No logs in NWA logs
My thoughts - if there is not any errors and no result, it can be because the user authorization. E.g. it tried to start a process by a user who doesn't have SAP_BPM_SuperAdmin role. But I can't find a way how to check what really happens. So I want to ask for a help, colleagues:).Dear Kirill Zhuklinets,
Can you share your solution as i am facing the same error while trying to consume BPM webservice from SRM ECC
Error Message from SRM ECC :
Exception occurred in communication framework:Error in HTTP Framework:405Method Not Allowed
Log from BPM Web service
Error: process()
[EXCEPTION]
com.sap.engine.interfaces.webservices.runtime.RuntimeProcessException: com.sap.engine.services.webservices.espbase.server.additions.wsa.WSAddressingException: com.sap.SOA.wsr.030104 - Expected request method POST. Found GET.
Please share your solution..
Regards,
Yasin -
Start BPM process automatically
Hi ALL,
I have created a BPM process. I can start that process automatically from nwa -> Process controll.
But I want to run the process automatically by a certain time interval. How can I do it.
Can anybody help me.
Thanks in advance
ChandanHi Chandan,
I am not 100% sure if I understood you correctly, but with BPMN there comes a model element named Intermediate Timer Event which can be configured in two different ways using:
an offset (e.g. 1 hour after the timer has been created)
an expression (e.g. ProcessContext.aDateOneEntered + 1 day)
Nevertheless this still requires you to start the process by yourself, but it 'waits' at the timer until the offset or the expression has been reached. Thereby you can achieve that an interval is taken into account upon execution of the process.
More information about events can be found in the documentation:
Modeling Events
https://help.sap.com/saphelp_nwce711/helpdata/en/47/61470236013df6e10000000a42189b/frameset.htm
Hope that helps,
Martin -
Cannot start BPM process, "Start process" button is disabled: Why?
Dear all,
I am working on the BPM example "Modeling Your First Process with SAP NetWeaver Business Process Management" with the "Purchase process". I did everything as mentioned in the tutorial.
At the end, I would like to start the process using
NWA > Configuration management > Processes and Tasks > Process Repository
I can see my WD example that I have deployed and I see the my task definitions and my process definition. In the tutorial it says, that I can select the process definition and click "Start process". But the button "Start process" is always disabled. I cannot click the button. I don't know why. Did I miss something?
I am logged in as Administrator. I am using NW AS 7.2 and I am developing with NWDS 7.1 SP04.
Anyone has an idea what can I do to start the process?
Thanks in advance
Edited by: Patrick Beck on Jun 25, 2010 4:55 PMThanks for the link.
I added the new context attribute in the XSD files (under Process Modeling > Data Types > XSD Files).
Since I added a new context attribute "Comment" of type String in my Web Dynpro, I added the following on the corrent position of the XSD files:
<xsd:element name="Comment" type="com.sap.dictionary.string">
<xsd:annotation>
<xsd:appinfo>
<xsd:attribute name="ReadOnly" type="xsd:boolean" fixed="false"/>
</xsd:appinfo>
</xsd:annotation>
</xsd:element>
I also edited input and output mapping of the human and automated activities to support the new attribute "Comment". I thought this is enough to pass the new "Comment" parameter from activity to activity.
But when I started the process, I filled in the comment field in Web Dynpro and went to the next step in the process. Seems like the new attribute value for "Comment" got lost. It does not appear in the next process step.
Did I miss something?
These are the steps I did:
- edit Web Dynpro UI to support the new context attribute "Comment". created new input field and mapped to the Comment context attribute (that is defined in my WDP interface).
- edited XSD files (one for each human activity) to support the new Comment attribute as mentioned above.
- edited the mapping between the activities to support pass-through of the new Comment attribute between the activities
But it seems like it's not saved in the context attribute "Comment". It got lost after the first step.
Any ideas?
Maybe you are looking for
-
Connection questions..(beginner)
In my case, i use jdbc and need to connect 2 remote MS SQL server named SQLNT1 and SQLNT2\SQLNT2 (don't ask me why this name so strange)... both has a database named "bees". Theres 's some problems in the connections.. I 've tested the followings: wh
-
how do i fix the screen of death on my ipod
-
PLEASE HELP--Rendering only captures center of composition!
Hi, I'm new to After Effects. I am trying to render a 10-sec, multi-layered 3D text logo, to import into Final Cut Pro Express. After that, it will go to YouTube. Everything looks great in Preview. But when I render it, all I get is a gigantic,
-
Hi Guys I have a requirement to create quotation using BDC for transaction ME47 where the net price is Zero. Could you guys please help me out/send me some code sample for my reference. I would be very grateful to you. Points will be awarded surely.
-
Indesign cs6, subscription, asking for license key
hi. i bought an indesign subscription. i downloaded and installed it via app manager. i am logged in as the person who bought the subscription. i can't start it - it's asking for a license key. i am using win 8 pro. i uninstalled my all adobe product