Unable to start certmgr in local machine mode from CMD

where this question goes?
I need to start "certmgr.msc" from "cmd.exe" on "localMachine" repository so that I can import\export certificates. I have tried the following commands but the "certmgr.msc" keeps opening on "currentUser".
certmgr.msc -s -r localMachine root
mmc.exe certmgr.msc -s -r localMachine root
certmgr.msc -v -s -r localMachine my

I'd try them over here.
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Similar Messages

  • Is it possible to start intel mac in target mode from ppc mac ?

    Hello all,
    Is it possible to start intel mac in target mode from ppc mac ? If so does using target mode make ANY change at all to the target disk if user doesn't voluntariliy write stuff to target disk ?
    Thanks in advance !

    Yes, you can, but with some notes. Braby sent some data, I add some other.
    Target Mode has two basic roles:
    1. to turn a mac into an external drive and/or external optical drive (if it has one, until Air era, all had); you may use this way if your internal optical drive is damaged and you wish to use the optical unit of the other mac; or use it as a simple external disk for backup purposes or else.
    2. to boot from a such-booted mac.
    #1 is usable with any two macs disregarding whether they are both PPC, both intel, or combination PPC-intel, as the behavior is like any external disk drive or external optical drive.
    #2 is impossible if you want to boot the other mac, they must be both intel or PPC, as you cannot use an intel-based mac as a boot mac for the other ppc-mac, and vice-versa.
    So said and clarified, you may use, but not if you intend to boot the other one if you wish to use it for various purposes implying boot.

  • Unable to start debugging on local(development) machine

    I have visual studio 2013 installed in my machine. From Yesterday, I keep getting unable to start debugging whenever I hit start button (F5) in visual studio.
    Any help will be appreciated.

    Thanks for Pavel A's help.
    Hi Kevinpiper,
    >> I keep getting unable to start debugging whenever I hit start button (F5) in visual studio.
    Could you share us the detailed error message in your side? Which kind of app did you create/debug?
    Whether all projects have the same issue? Maybe you could run your VS as the admin, test the result.
    I suggest you share us the detailed error message, maybe we could get more helpful informaiton from it.
    To make sure that whether it is the debugger issue, one idea is that you could run your app with "start without debugging(Ctrl+ F5)".
    I met an issue before which looks like that "unable to start debugging, it couldn't run/find the .exe file in your project folder", generally we would think about the Output Path under Project properties->Build options and make
    sure that it really had the .exe file there.  
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    HERE to participate the survey.

  • Unable to start gsd on local node

    Hi all, I am working in a live enviorment and in of help. I am wokring in a RAC enviorment and unable to start "gsd" on one of the nodes, all the rest of the services are online. Following is the visual display. Can some one tell me what I am doing wrong.
    <fms-db2:/oracle/app/oracle/product/10.2>crs_stat -t
    Name Type Target State Host
    ora....DB1.srv application ONLINE ONLINE fms-db1
    ora....MSDB.cs application ONLINE ONLINE fms-db2
    ora....B1.inst application ONLINE ONLINE fms-db1
    ora....B2.inst application ONLINE ONLINE fms-db2
    ora.FMSDB.db application ONLINE ONLINE fms-db2
    ora....B1.lsnr application ONLINE ONLINE fms-db1
    ora....db1.gsd application ONLINE ONLINE fms-db1
    ora....db1.ons application ONLINE ONLINE fms-db1
    ora....db1.vip application ONLINE ONLINE fms-db1
    ora....B2.lsnr application ONLINE ONLINE fms-db2
    ora....db2.gsd application ONLINE OFFLINE
    ora....db2.ons application ONLINE ONLINE fms-db2
    ora....db2.vip application ONLINE ONLINE fms-db2
    <fms-db2:/oracle/app/oracle/product/10.2>gsd stat
    Could not start the daemon on the local node.
    <fms-db2:/oracle/app/oracle/product/10.2>gsd start
    Could not start the daemon on the local node.

    Check the crsd.log under $ORA_CRS_HOME/log/$(hostname)/crsd
    That will show you what the error was. At that point, you can look up the error in the documentation (not before, as others posters seem to think). All gsd does is coordinate access amongst the various tools such as dbca, so it isn't "life threatening", anyway. Usually if one dies, though, others may very likely follow.

  • Equium L20 - Unable to start up Windows in any mode

    I was wondering if you can help me. I have an Equium L20 -197, windows xp home edition. (Also technically challenged! :)) When I started my laptop first time today, I got this message -
    "We are sorry for the inconvenience but windows did not start up successfully..."
    and it gave me a few methods of starting it up:
    Safe Mode
    Safe Mode with Networking
    Safe Mode with Command Prompt
    Last Know Good Configuration (your most recent settings that worked)
    Start Windows Normally
    I was able to start press start windows normally and computer started fine. I shut down the computer OK, then restarted it later on without any problems. I then restored to an earlier setting as system was not running well. Restore seemed to go OK but then my computer froze, so had to shut down by pressing down the power button.
    However, the laptop will now not reboot. Just as I think it is starting it goes to the error message and none of the options will work to start the computer and I am now stuck on an endless loop of the above message.
    I do not want to use the product recovery disc, as it will wipe all of the hard drive and I have info that I need to access! I do have a product recovery CD for a Fujitsu that has windows xp home edition sp 1 on it. Is there any way that I can use this to start my computer or is there something else that I should do? I was thinking of pressing F12 and if it is possible to use the other disc Fujitsu to kick start my system but not sure if that is possible. I did not have an xp disc installation disc from toshiba, when I bought the computer. :(
    I have been told by a computer guy over the phone that it sounds as if I need a new hard drive but would like to explore other methods before going down that route.
    Many thanks in advance for any help that you can give me. Susi

    Hi SusiB_1,
    Unfortunately if you cant start Windows in any these modes you have only one option and this is reinstalling Windows. I mean what you should do?! You can do nothing in this case
    As you wrote the Toshiba recovery disk wipes the whole HDD and thats right because its necessary to get factory settings back. But normally you should have a backup of your data or not???
    If not you can access the data if you put the HDD in an external HDD case. From another computer you have access to these data now.
    By the way: For Toshiba recovery disk you dont need a product key. Everything is already be done in recovery image and no activation is necessary. :)

  • Starting the nzrView in listen mode from the command line...

    I want to be able to start the nzrViewer in listen mode when I log into windows and then be able to accept an invite for a collaboration session. When I added a shortcut to the "nzrViewer.exe /listen 5550" to my Startup Folder, it launches the Remote Listener just fine, but when I someone invites me to collaborate a Remote Session, I get an error message "Ticket not provided for Rights Authentication."
    I believe that the problem is when I launch the Viewer from the command line, I'm not authenticated to the Zen server, so it can't verify my Rights.
    Does anyone have a better way to do this? Or do I have to log into ZCC and launch the "Remote Management Listener" from there?

    Originally Posted by mcdonalj
    I want to be able to start the nzrViewer in listen mode when I log into windows and then be able to accept an invite for a collaboration session. When I added a shortcut to the "nzrViewer.exe /listen 5550" to my Startup Folder, it launches the Remote Listener just fine, but when I someone invites me to collaborate a Remote Session, I get an error message "Ticket not provided for Rights Authentication."
    I believe that the problem is when I launch the Viewer from the command line, I'm not authenticated to the Zen server, so it can't verify my Rights.
    Does anyone have a better way to do this? Or do I have to log into ZCC and launch the "Remote Management Listener" from there?
    There has been some updates in the documentation for 10.2.2 about remote control from cmd line.
    Check it out, maybe there is a solution to your problem.

  • Unable to start up in "Single User Mode."

    I am on an Intel Mac Pro. I can't seem to start up in the Single User Mode.
    I hold down the Command and S keys during startup, but always get to my regular screen, logged in to my account. I changed the login options from automatic to off, but the same thing still happens. Any help would be appreciated.

    Have you possibly set yourself a firmware password? Further instructions here:

  • Unable to start Meta-directory 5.1.1 from the console

    Installed DS5.2 patch2 (patchzip) fr
    Installed MD5.1.1
    Everything goes fine except :
    I can't start the join-engine or the utc from the console.
    When I start any of them the process starts but seems to hang in an unknown state.
    No log anywhere.
    The console still sees the processes as down.
    Any idea ?
    It seemed to work fine before applying DS52 patch2.
    Best regards,
    Vincent MAZARD

    Installed DS5.2 patch2 (patchzip) fr
    Installed MD5.1.1
    Everything goes fine except :
    I can't start the join-engine or the utc from the console.
    When I start any of them the process starts but seems to hang in an unknown state.
    No log anywhere.
    The console still sees the processes as down.
    Any idea ?
    It seemed to work fine before applying DS52 patch2.
    Best regards,
    Vincent MAZARD

  • Access local machine internet from Hyper-V Machine

    Dear All,
    I have configured a VM as a domain controller and want to access my host machine internet. below is an image of the VM Settings
    Mohd Sufian www.sqlship.wordpress.com Please mark the post as Answered if it helped.

    Hello Mohammad,
    As I can see from your screenshot above that you have 2 vNICs attached to this Virtual Machine.
    The logical Name is set to Internal Switch. Could you please confirm what type of Virtual Switch did you choose when you create the vSwitch?
    External, Internal or Private?
    If the Virtual Switch is Created as Internal, then it's impossible to access the Internet, the network traffic won't leave the Hyper-V Host. Please make sure that you have at least one Virtual Switch created as
    External and attached to this VM.  
    Now based on your existing Network Infrastructure (VLAN, Firewall, etc...) you must adjust if needed.
    Hope this help.
    Charbel Nemnom
    Blog: www.charbelnemnom.com
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark
    as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Unable to access local machine after a VPN connection

    I have been previously able to control other machine are our network after making a successful VPN connection, until we have to rebuild the server. I have configure everything as before (as I believe), but I am still unable to connect to other local machines. I am able to connect to our xserve and shared drives (via AFP). ARD ports are open as neccessary. thank you

    Hi n.dave, and a warm welcome to the forums!
    So, I take it all the numbers are faked?
    Is the 5th number on the failed on in your Network?

  • Dbx: Unable to start the JVM

    I am trying to debug a Java class file using dbx. I would like to use this new feature that allows you switching between Java and C modes within the same debugger. However, when I try to execute command "debug myclass.class" in dbx, it complains that it is "Unable to start he Java virtual machine". The JVM that it attempts to start prints the message "(dbx) AgentThread: JVM_OnLoad(): debugger not attaching".
    When I try to start the JVM by hand and attach to it with dbx, it attaches just fine, but then I cannot set any breakpoints in class files, because dbx does not seem to understand that they are Java classes: it attempts to treat them as C objects.

    Dbx is not designed for debugging the jvm as such. While it is
    possible to set breakpoints in jvm code (use "native stop ..." or
    turn java mode off temporarily with "joff"), doing so could lead
    to deadlocks. The way java debugging works in dbx is that
    dbx makes function calls into the jvm to fetch java information
    and to control the java threads. So a jvm breakpoint might be
    hit when you do a (java) "threads" command in dbx, for example.
    If you still wish to try it, you should be able to tell dbx to start
    your java app using your debuggable jvm by setting the env
    variable "jvm_invocation" to "/full/path/to/java -Xdebug" before
    starting dbx. Then use "native step" or "joff" and "step" to step into
    the jvm code.
    Hope this helps!
    Dave W.

  • Oc4j doesn't start in my local

    I am unable to start in my local.
    Please help me to start
    Felix S

    don't forget to search OTN, including the OBIEE forum (Business Intelligence Suite Enterprise Edition because chances are the problem you're getting has been seen and resolved before.

  • Publishing documents from local machine onto Infoview

    Post Author: ak004
    CA Forum: Publishing
    Hi All,
    I am trying to upload/publish documents from my local drive on to Infoview so users can see them in infoview. We can do that by clicking "New" button and selecting the document. But is there a way to do this programatically? I have to upload documents into different folders based on the type of the document.
    My environment is Crystal Reports Server XI R2.
    Appreciate your help.
    thanks, Ajith

    Post Author: tomw
    CA Forum: Publishing
    Two routes for this.
    1) Install the local machine tools from your server disk, and use the publishing wizard.
    2) Inside crystal reports - Click file -> Save As -> Enterprise and choose which folder to save it in

  • JSP getting local machine time?

    I need to create a program which the users are located in two time zone. I will hence need to use the local machine time from their PC to check against certain record in my database. I understand JSP is processed at the server end. Is JSP capable of requesting the local machine time when a user hit the page?
    otherwise, is there a way to use javascript to parse the local machine time into JSP?
    Thank you.

    create a javascript function to get the local time:
    function getLocalTime() {
    var dDay = new Date();
    var nHours = dDay.getHours();
    var nMinutes = dDay.getMinutes();
    var localTime = nHours + ":" + nMinutes;
    in your jsp include a hidden field to accept the local time:
    <input type=hidden name=localTime value="">
    call the getLocalTime() function onload, in this way you can get the local time of the client machine when the page is loaded, store it in a hidden field and then retrieve it in the next jsp using request.getParameter("localTime") method.

  • Unable to start AdminServer ( Unable to make AdminServer to running mode)

    Hi All,
    Can someone help me out with this issue ?
    Because of this , i'm not able to move further :(
    My Issue : Unable to start the AdminServer
    Let me know if need any additional information.
    [[email protected] bin]$ ./startWebLogic.sh &
    [1] 3765
    [[email protected] bin]$ .
    JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m
    WLS Start Mode=Development
    * To start WebLogic Server, use a username and *
    * password assigned to an admin-level user. For *
    * server administration, use the WebLogic Server *
    * console at http://hostname:port/console *
    starting weblogic with Java version:
    java version "1.6.0_14"
    Java(TM) SE Runtime Environment (build 1.6.0_14-b08)
    Java HotSpot(TM) Client VM (build 14.0-b16, mixed mode)
    Starting WLS with line:
    /home/weblogic/Oracle/Middleware/jdk160_14_R27.6.5-32/bin/java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m -Dweblogic.Name=AdminServer -Djava.security.policy=/home/weblogic/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.policy -Xverify:none -da -Dplatform.home=/home/weblogic/Oracle/Middleware/wlserver_10.3 -Dwls.home=/home/weblogic/Oracle/Middleware/wlserver_10.3/server -Dweblogic.home=/home/weblogic/Oracle/Middleware/wlserver_10.3/server -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=/home/weblogic/Oracle/Middleware/patch_wls1032/profiles/default/sysext_manifest_classpath weblogic.Server
    <Oct 22, 2012 12:35:50 PM IST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 14.0-b16 from Sun Microsystems Inc.>
    <Oct 22, 2012 12:35:50 PM IST> <Info> <Management> <BEA-141107> <Version: WebLogic Server Tue Oct 20 12:16:15 PDT 2009 1267925 >
    <Oct 22, 2012 12:35:51 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    <Oct 22, 2012 12:35:51 PM IST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
    <Oct 22, 2012 12:35:52 PM IST> <Notice> <Log Management> <BEA-170019> <The server log file /home/weblogic/Oracle/Middleware/user_projects/domains/domain-1/servers/AdminServer/logs/AdminServer.log is opened. All server side log events will be written to this file.>
    *<Oct 22, 2012 12:35:53 PM IST> <Error> <Security> <BEA-090870> <The realm "myrealm" failed to be loaded: weblogic.security.service.SecurityServiceException: java.lang.ExceptionInInitializerError.*
    weblogic.security.service.SecurityServiceException: java.lang.ExceptionInInitializerError
         at weblogic.security.service.CSSWLSDelegateImpl.initializeServiceEngine(CSSWLSDelegateImpl.java:342)
         at weblogic.security.service.CSSWLSDelegateImpl.initialize(CSSWLSDelegateImpl.java:221)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.InitializeServiceEngine(CommonSecurityServiceManagerDelegateImpl.java:1783)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:442)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:840)
         Truncated. see log file for complete stacktrace
    *Caused By: java.lang.ExceptionInInitializerError*
         at com.octetstring.vde.util.guid.GuidGenerator.nextGuidInBytes(GuidGenerator.java:125)
         at com.octetstring.vde.util.guid.Guid.<init>(Guid.java:84)
         at com.octetstring.vde.backend.standard.BackendStandard.add(BackendStandard.java:379)
         at com.octetstring.vde.backend.BackendHandler.add(BackendHandler.java:460)
         at com.octetstring.vde.util.LDIF.importLDIF(LDIF.java:279)
         Truncated. see log file for complete stacktrace
    Caused By: java.lang.NullPointerException
         at java.lang.System.arraycopy(Native Method)
         at com.octetstring.vde.util.guid.GuidParamGenerator.generateNodeID(GuidParamGenerator.java:47)
         at com.octetstring.vde.util.guid.GuidStateManager.initializeGUIDParameters(GuidStateManager.java:59)
         at com.octetstring.vde.util.guid.GuidStateManager.<init>(GuidStateManager.java:30)
         at com.octetstring.vde.util.guid.GuidStateManager.<clinit>(GuidStateManager.java:23)
         Truncated. see log file for complete stacktrace
    <Oct 22, 2012 12:35:53 PM IST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
    <Oct 22, 2012 12:35:53 PM IST> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
    There are 1 nested errors:
    *weblogic.security.service.SecurityServiceRuntimeException: [Security:090399]Security Services Unavailable*
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:916)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
         at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
         at weblogic.security.SecurityService.start(SecurityService.java:141)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    <Oct 22, 2012 12:35:53 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
    <Oct 22, 2012 12:35:53 PM IST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
    <Oct 22, 2012 12:35:53 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>

    Hi All,
    I'm happy to announce that I've successfully resolved my issue.
    Able to start the WebLogic AdminServer , and make it to RUNNING mode.
    Let me give some background about the issue and resolution:-
    I came across 2 types of errors while starting the AdminServer immediately after creating domain
    a) myrealm failed to be loaded weblogic.security.service.securityserviceexception
    b)+<WebLogic Server> <BEA-000386> <Server subsystem failed. Reason: java.lang.AssertionError: Could not obtain the localhost address. The most likely cause is an error in the network configuration of this machine+.
    Note : First i encountered with the issue (a) , and then later after re-installed again.. and created fresh weblogic domain.. came up with the issue (b)
    I tried couple of ways like
    1. Editing config.xml file by adding/editing <listen-address>********</listen-address> field
    2. Deleting data folder under /ldap folder
    3. Clearing /tmp and /cache folders
    4. Commenting ADMIN_URL in setDomainEnv
    And last I'm able to resolve it by observing , and updating the following :
    [[email protected] ~]# hostname
    [[email protected] ~]# more /etc/hosts          localhost.localdomain localhost
    ::1          localhost6.localdomain6 localhost6
    *     kiran* --> Add this line , and this did all magic to fix my issue.
    That's it , I'm able to start the AdminServer without any issue.
    Thank You so much for all who looked into my issue here , and helped me.
    Thanks once again.

Maybe you are looking for

  • E63 Text message options

    Can I type a text message and "diarize" it to be delivered on a future date and time?

  • I have jvc gy-hm100 video cam.I would like to know which format is best for final cut pro?

    My camera has a every size of resoloution. From 1080-60/30 to 720-24.It is totally compatiable with FCP.What i would like to know is what format is recomended for music video's and film production.Any info is greatly apprec!!!! Thank you! P.S. Ive be

  • Problem creating database in

    Hi all, I'm using the DBCA to create the database. During the creation of database which on "Database Configuration Assistant" window where it undergo the process of Completing Database Creation, the status of the database creation is at 85% which it

  • Problem opening RAW files in Elements 11

    I have installed Photoshop Elements 11. When I try to open .NEF raw files they do not show in the File-Open dialog box. NEF is not shown as a option in the filetype drop down in File-Open. I am running Windows XP SP3. Is there something wrong with th

  • Using CopyIntoItems from Copy.asmx from a remote soap client

    Hello, I have been working on a soap client that runs on a remote client (not on the SharePoint server) and is platform-independent so that it cannot use the SP Object Model. I have managed to get most of the functionality working using SharePoint we