Unable to start crs services

Hi,
I have completed installation of Oracle Clusterware 10.2.0.1 on Linux X86, RHEL 4 (using OCFS2). This is a two node system.
After running a few tests we had some disk corruption on the shared storage system and hence we had to reformat the shared filesystem (only the shared FS not the local filesystems on the nodes). I copied the backup OCR and VDISK files into their original directories after the formating, and moved the mirror backups into their original directory. But I am unable to start the cluster services, I have tried the following
$./crsctl start crs
Attempting to start CRS stack
The CRS stack will be started shortly
$
Didn't work, no services started up.
I then tried the following command
$ ./init.crs start
Startup will be queued to init within 90 seconds.
But again I don't see the crs daemons up and running.
I don't see anything in the logs (crsd, css, evmd etc) the last lines there were before we shutdown everything and then formated the shared storage.
If anyone has come across a similar issue then please advice on possible errors I could look for or how to work around this to get the crs services started so that I can install the database software. Any help/advice will be appreciated
Thanks.

Hi,
since you mention the reformatting of the shared disks:
Check /var/log/messages for things like
"Cluster Ready Services waiting on dependencies. Diagnostics in /tmp/crsctl.xxxx",
best use cat /var/log/message | grep crsctl.
After that the mentioned /tmp/crsctl.xxxx file.
You might find Oracle Error PROC-0026 there:
"Error while accessing the physical storage".
What is meant is the OCR.
Check if user/group of the raw devices is still oracle:oinstall, it might have changed to root:disk by reformatting.
I myself had this case unexpectedly now some times even WITHOUT any reformatting, I suspect that touching the raw devices with Linux LVM might change ownership.
regards
Robert

Similar Messages

Unable to start presentation services , in OBIEE 11g

Hi ,
Unable to start presentation services , in OBIEE 11g :
[2013-01-18T13:38:49.000+05:30] [OBIPS] [INCIDENT_ERROR:1] [] [saw.webextensionbase.init] [ecid: ] [tid: ] Invalid item /system/mktgcache/01HW447397/sawguidstate.[[
File:catalogimpl.cpp
Line:660
Location:
     saw.webextensionbase.init
     saw.sawserver
     saw.sawserver.initializesawserver
     saw.sawserver

Follow the steps below:
1.Shutdown all OBIEE services.
2.Replace the files sawguidstate and sawguidstate.atrin the location:
<Instance_Home>\instances\<instance_name>\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1\catalog\<project>\root\system\mktgcache\<name>
with the same files from a backup or from another working instance.
3.Restart all OBIEE services.

Unable to start ifs service after database is restarted

Hi All,
I am getting this weird problem with iFS. I have web application where I connect to iFS to read some of the documents. The problem is when the database is stopped and started with App server still running (ifs is also up and running)... I am getting the following error message.
Any help will be greatly appreciated. I have also attached the java class which I am using to get connection...
oracle.ifs.common.IfsException: IFS-21008: Unable to connect to iFS service
oracle.ifs.common.IfsException: IFS-11013: Unable to start inter-service event exchanger
java.sql.SQLException: No more data to read from socket
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:168)
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:210)
     at oracle.jdbc.dbaccess.DBError.check_error(DBError.java:857)
     at oracle.jdbc.ttc7.MAREngine.unmarshalUB1(MAREngine.java:731)
     at oracle.jdbc.ttc7.MAREngine.unmarshalSB1(MAREngine.java:690)
     at oracle.jdbc.ttc7.Oopen.receive(Oopen.java:103)
     at oracle.jdbc.ttc7.TTC7Protocol.open(TTC7Protocol.java:466)
     at oracle.jdbc.driver.OracleStatement.<init>(OracleStatement.java:413)
     at oracle.jdbc.driver.OracleConnection.privateCreateStatement(OracleConnection.java:470)
     at oracle.jdbc.driver.OracleConnection.createStatement(OracleConnection.java:379)
     at oracle.ifs.server.S_LibraryServiceRdbmsEventExchanger.start(S_LibraryServiceRdbmsEventExchanger.java:243)
     at oracle.ifs.server.S_LibraryService.addSession(S_LibraryService.java:2695)
     at oracle.ifs.server.S_LibrarySession.<init>(S_LibrarySession.java:1961)
     at java.lang.reflect.Constructor.newInstance(Native Method)
     at oracle.ifs.server.S_LibraryService.constructSession(S_LibraryService.java:2566)
     at oracle.ifs.server.S_LibraryService.connect(S_LibraryService.java:2359)
     at oracle.ifs.beans.LibraryService.connect(LibraryService.java:977)
     at com.comp.test.utils.iFSSession.getIfsConnection(iFSSession.java:73)
     at com.comp.test.controller.ReportRequestAction.processRequest(ReportRequestAction.java:95)
     at com.comp.test.controller.ReportRequestAction.execute(ReportRequestAction.java:64)
     at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
     at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
--java code
          if(!LibraryService.isServiceStarted(serviceName)) {
          service = LibraryService.startService(serviceName,servicepasswd);
          } else {
          service = LibraryService.findService(serviceName);
               //CredentialManager to authenticate a user
          CleartextCredential cred = new CleartextCredential(name, password);
          ConnectOptions connectOpt = new ConnectOptions();
               //Sets and gets the Locale of the new session.
          connectOpt.setLocale(Locale.getDefault());
               //Connects to iFS, establishing a new LibrarySession
          ifsSession = service.connect(cred, connectOpt);
               //Set the administrator mode state for this session
               ifsSession.setAdministrationMode(true);
               return ifsSession;

I am using the following class to get ifs session from IfsHttpLogin
public class TestIfsSession implements IfsHttpLogin {
* The <code>LibrarySession</code>.
private LibrarySession m_session;
* The <code>FolderPathResolver</code>.
private FolderPathResolver m_resolver;
* Default constructor required by the jsp spec for the USEBEAN tag
* @exception IfsException
public TestIfsSession() throws IfsException {
public void init(LibrarySession libSession)
     this.m_session = libSession;
* Return the login's session object.
* @return The <code>LibrarySession</code> object.
public LibrarySession getSession() {
return m_session;
* Return the login's path resolver.
* @return The <code>FolderPathResolver</code> object.
public FolderPathResolver getResolver() {
return m_resolver;
* Called when this object is bound to the HTTP session object.
* @param event
* The event when the object is bound to the Http session.
public void valueBound(HttpSessionBindingEvent event) {
// do nothing
m_category.debug("value bound : ");
* Called when this object is unbound from the HTTP session object.
* @param event
* The event when the object is unbound to the Http session.
public void valueUnbound(HttpSessionBindingEvent event) {
m_resolver = null;
try {
if (m_session != null) {
m_category.debug("removing connection: valueUnbound " + m_session);
m_session.disconnect();
} catch (IfsException e) {
e.printStackTrace();
} finally {
m_session = null; // release the resources
System.gc();

[SOLVED] Network Configuration -- unable to start a service file

I am following this wiki page (Using Static IP address step) and created /etc/systemd/system/network.service as instructed
[Unit]
Description=Connect to the other pc
Wants=network.target
Before=network.target
BindsTo=sys-subsystem-net-devices-lan.device
After=sys-subsystem-net-devices-lan.device
[Service]
Type=oneshot
RemainAfterExit=yes
EnvironmentFile=/etc/conf.d/network
ExecStart=/sbin/ip link set dev lan up
ExecStart=/sbin/ip addr add 192.168.1.2/24 dev lan
ExecStart=/sbin/ip route add default via 192.168.1.1
ExecStop=/sbin/ip addr flush dev lan
ExecStop=/sbin/ip link set dev lan down
[Install]
WantedBy=multi-user.target
But I am unable to start network.service
$ sudo systemctl start network
Job for network.service failed. See 'systemctl status network.service' and 'journalctl -xn' for details.
$ systemctl status network.service
network.service - Connect to voice
Loaded: loaded (/etc/systemd/system/network.service; enabled)
Active: failed (Result: resources)
$ sudo journalctl -xn
-- Logs begin at Sat 2013-03-30 03:48:02 AMT, end at Thu 2013-04-04 18:17:46 AMT. --
Apr 04 18:17:26 work sudo[24774]: pam_unix(sudo:session): session closed for user root
Apr 04 18:17:44 work sudo[25354]: void : TTY=pts/0 ; PWD=/etc/systemd/system ; USER=root ; COMMAND=/usr/bin/systemctl start network
Apr 04 18:17:44 work sudo[25354]: pam_unix(sudo:session): session opened for user root by void(uid=0)
Apr 04 18:17:44 work systemd[1]: Starting Connect to the other pc...
-- Subject: Unit network.service has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Documentation: http://www.freedesktop.org/wiki/Software/systemd/catalog/7d4958e842da4a758f6c1cdc7b36dcc5
-- Unit network.service has begun starting up.
Apr 04 18:17:44 work systemd[1]: Failed to load environment files: No such file or directory
Apr 04 18:17:44 work systemd[1]: network.service failed to run 'start' task: No such file or directory
Apr 04 18:17:44 work systemd[1]: Failed to start Connect to the other pc.
-- Subject: Unit network.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Documentation: http://www.freedesktop.org/wiki/Software/systemd/catalog/be02cf6855d2428ba40df7e9d022f03d
-- Unit network.service has failed.
-- The result is failed.
Apr 04 18:17:44 work sudo[25354]: pam_unix(sudo:session): session closed for user root
Apr 04 18:17:46 work sudo[25421]: void : TTY=pts/0 ; PWD=/etc/systemd/system ; USER=root ; COMMAND=/usr/bin/journalctl -xn
Apr 04 18:17:46 work sudo[25421]: pam_unix(sudo:session): session opened for user root by void(uid=0)
Additional info:
I have connected 2 PCs with LAN (Ethernet) cable and want configure them for exchanging files. Both running Arch Linux. I am following the Network Configuration wiki page from the beginning. Didn't have luck with DHCP/dynamic IP, so trying Static IP this time. Restarting the pc with network.service enabled results in same error (in systemctl --failed). Same error message on both PCs.
Trying to run ExecStart lines one by one:
$ sudo /sbin/ip link set dev lan up
$ sudo /sbin/ip addr add 192.168.1.2/24 dev lan
RTNETLINK answers: File exists
$ sudo /sbin/ip route add default via 192.168.1.1
RTNETLINK answers: File exists
Does this mean there already is IP address and route assigned? If so, how to find out which service has done that? Do I need to remove it? Am I following the right wiki page (didn't find another)?
What am I doing wrong and how can I correct this error? / Point me in right direction.
Last edited by axper (2013-04-04 19:26:17)

henk wrote:
EnvironmentFile=/etc/conf.d/network
Apr 04 18:17:44 work systemd[1]: Failed to load environment files: No such file or directory
have you checked if the network file exists?
Oh thanks, that line was causing problems! Now I do have network.service(s) running on both PC's with this content:
[Unit]
Description=Connect to my desktop/laptop
Wants=network.target
Before=network.target
BindsTo=sys-subsystem-net-devices-lan.device
After=sys-subsystem-net-devices-lan.device
[Service]
Type=oneshot
RemainAfterExit=yes
ExecStart=/sbin/ip link set dev lan up
ExecStart=/sbin/ip addr add 192.168.1.2/24 dev lan
ExecStart=/sbin/ip route add default via 192.168.1.1
ExecStop=/sbin/ip addr flush dev lan
ExecStop=/sbin/ip link set dev lan down
[Install]
WantedBy=multi-user.target
I don't get any errors, and this is network's status (on both PCs) when cable is connected
$ sudo systemctl restart network
$ systemctl status network
network.service - Connect to my desktop
Loaded: loaded (/etc/systemd/system/network.service; disabled)
Active: active (exited) since Thu 2013-04-04 22:43:22 AMT; 8s ago
Process: 9761 ExecStop=/sbin/ip link set dev lan down (code=exited, status=0/SUCCESS)
Process: 9757 ExecStop=/sbin/ip addr flush dev lan (code=exited, status=0/SUCCESS)
Process: 9768 ExecStart=/sbin/ip route add default via 192.168.1.1 (code=exited, status=0/SUCCESS)
Process: 9766 ExecStart=/sbin/ip addr add 192.168.1.2/24 dev lan (code=exited, status=0/SUCCESS)
Process: 9764 ExecStart=/sbin/ip link set dev lan up (code=exited, status=0/SUCCESS)
And here wiki page is no more help. How can I test connection?
I try to ping, and it works on both machines (if it's the right thing to test?)
$ ping -c3 192.168.1.2
PING 192.168.1.2 (192.168.1.2) 56(84) bytes of data.
64 bytes from 192.168.1.2: icmp_seq=1 ttl=64 time=0.039 ms
64 bytes from 192.168.1.2: icmp_seq=2 ttl=64 time=0.050 ms
64 bytes from 192.168.1.2: icmp_seq=3 ttl=64 time=0.060 ms
--- 192.168.1.2 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 1998ms
rtt min/avg/max/mdev = 0.039/0.049/0.060/0.011 ms
Now I need to figure out how to share files. Thanks all.
Last edited by axper (2013-04-04 19:04:43)

Unable to start a service execution

While uninstalling NW7.02 i came across with an error (while selecting continue with run a new option) of
unable to start a service execution.
Please check the following information for the possible reason and inform the installation development.

Hi Vidushi,
Remove all the sapinst exe file and sapinst_dir.
kill all the process of sapinst.
set the new TEMP variable and start the sapinst.
With Regards
Ashutosh Chaturvedi

Unable to start crs on single-node instance

Hello -
I am running 11.1.0.7 for my ASM instance, and I am unable to start crs. I get the following error message:
[root@mbiwfhmdwee 624]# ./crsctl start crs
Attempting to start Oracle Clusterware stack
Failure at scls_scr_create with code 1
I just installed the Oracle software, and this is the first time I am trying to get ASM running on this server.
Any help is appreciated!
Thanks,
Mike

you are probably hitting bug 4632899 - CSS does not start if hostname has capital letters (ML note 4632899.8)
=> Change the hostname to from uppercase to lower case.

Unable to start apps services

hai,
i was instlled 12.0.4 on RHEL AS 4.0 32 bit operating system. everything is working fine. after some days unexpectullay IPADREss of server was changed.
know the apps services i was unable to start. can u tell me we need to chane in any files this ipadrress????

You just need to change the IP address in the etc file and bounce the services. If this does not help, then run AutoConfig on the database and the application tiers.

Unable to start Presentation Services- Windows 7

Hi,
I'm unable to start the Presentation Services , when i do so i am getting a message "Internet Explorer cannot display the webpage"
Windows 7 ultimate.
All services started like BI server, BI Presentation and Java Host
Installation were successful, able to open Repository.
BI Publisher is also getting started.
I need to look into the Answers, unable to start the Presentation Services, any help is very much appreciated !
Thanks

Hi,
Can you past it sawlog0.log message also Make sure below points (just double check and test it)
1) Check your instanceconfig.XML file (better if u have back up plz restore it then change it u r current catalog)
2) In the RPD, go to Manage -> Variables. Look through your initialization blocks and see if any are being used to set the USER variable.
3) make sure if have LDAP settup (external table via init blog)
4) if you can back of your RPD,Catalog restore it then try to access it (for testing) if its works then u r current issue catalog may be corrupted webcat
if your providing sawlog0.log ..it will be easy to find the issues
Thanks
Deva

Unable to start OPMN service

Hi group,
I have applied patch 12.1.2 and followed some steps to configure SOA Gateway and after that I am unable to start Apache Server.
I have enabled "debug" option in opmn.xml file as follow:
<debug path="F:\ORAEBS_APPS\inst\apps\EBSTEST_srvoracle05\logs\ora\10.1.3\opmn\opmn.dbg" comp="internal;ons;pm" rotation-size="1500000" rotation-hour="0" />
But nothing is created in opmn.dbg file.
Service is started in Windows, but when I try to query it, it displays as follow:
F:\ORAEBS_APPS\inst\apps\EBSTEST_srvoracle05\admin\scripts>adopmnctl.cmd start
Thu 05/13/2010 01:15 PM
Starting Oracle Process Manager (OPMN) ...
CALL F:\ORAEBS_APPS\apps\tech_st\10.1.3\opmn\bin\opmnctl.exe start
Service is already running
opmnctl: opmn already running
STATE : 4 RUNNING
exiting with status 0
ERRORCODE = 0 ERRORCODE_END
F:\ORAEBS_APPS\inst\apps\EBSTEST_srvoracle05\admin\scripts>adopmnctl.cmd status
Thu 05/13/2010 01:15 PM
Checking status of OPMN managed processes...
Unable to connect to opmn.
Opmn may not be up.
exiting with status 2
ERRORCODE = 2 ERRORCODE_END
Any advice or help will be really appreciated.
Thanks in advance.
Kind regards,
Francisco Mtz. Oviedo

Hussein,
I don't get any error when I stop and start using Services Windows.
You know, file opmn.dbg is empty and there is no file opmn.log at F:\ORAEBS_APPS\inst\apps\EBSTEST_srvoracle05\logs\ora\10.1.3\opmn
I am able to run AutoConfig without any problem.
This is what I am getting when I try to use command mode:
F:\ORAEBS_APPS\inst\apps\EBSTEST_srvoracle05\admin\scripts>adapcctl.cmd start
Thu 05/13/2010 01:33 PM
Unable to connect to opmn.
Opmn may not be up.
Oracle Process Manager Deamon (OPMN) is not running
exiting with status 1
ERRORCODE = 1 ERRORCODE_END
F:\ORAEBS_APPS\inst\apps\EBSTEST_srvoracle05\admin\scripts>adapcctl.cmd status
Thu 05/13/2010 01:34 PM
Checking status of OPMN managed processes...
Unable to connect to opmn.
Opmn may not be up.
exiting with status 2
ERRORCODE = 2 ERRORCODE_END
F:\ORAEBS_APPS\inst\apps\EBSTEST_srvoracle05\admin\scripts>adopmnctl.cmd status
Thu 05/13/2010 01:34 PM
Checking status of OPMN managed processes...
Unable to connect to opmn.
Opmn may not be up.
exiting with status 2
ERRORCODE = 2 ERRORCODE_END
F:\ORAEBS_APPS\inst\apps\EBSTEST_srvoracle05\admin\scripts>adopmnctl.cmd start
Thu 05/13/2010 01:34 PM
Starting Oracle Process Manager (OPMN) ...
CALL F:\ORAEBS_APPS\apps\tech_st\10.1.3\opmn\bin\opmnctl.exe start
Service is already running
opmnctl: opmn already running
STATE : 4 RUNNING
exiting with status 0
ERRORCODE = 0 ERRORCODE_END
Thanks in advance.
Kind regards,
Francisco Mtz. Oviedo

Unable to Start Presentation service

Hi All,
I am unable to start the presentation service. The logs shows following error message. Could you please guide me
racle BI Presentation Services 10.1.3.4.1 (Build 090414.1900) are starting up.
Type: Error
Severity: 20
Time: Sun Jul 03 20:11:39 2011
File: project/webodbcaccess/odbcenvironment.cpp Line: 98
Properties: ThreadID-2308
Location:
     saw.webextensionbase.staticinit
     saw.sawserver
     saw.sawserver.initializesawserver
     saw.threads
ODBC driver preload failed. ODBC library name: 'nqsodbc.dll'
Type: Error
Severity: 20
Time: Sun Jul 03 20:11:39 2011
File: project/webodbcaccess/odbcenvironment.cpp Line: 100
Properties: ThreadID-2308
Location:
     saw.webextensionbase.staticinit
     saw.sawserver
     saw.sawserver.initializesawserver
     saw.threads
The specified module could not be found.
Type: Error
Severity: 42
Time: Sun Jul 03 20:11:39 2011
File: project/webodbcaccess/odbcenvironment.cpp Line: 195
Properties: ThreadID-2308
Location:
     saw.webextensionbase.staticinit
     saw.sawserver
     saw.sawserver.initializesawserver
     saw.threads
Allocation of SQLEnvironment failed (SQLError: -1). Please ensure that the odbc driver is in your environment path.
Type: Error
Severity: 20
Time: Sun Jul 03 20:11:39 2011
File: project/sawserver/winmain.cpp Line: 74
Properties: ThreadID-2308
Location:
     saw.sawserver.initializesawserver
     saw.threads
Allocation of SQLEnvironment failed (SQLError: -1). Please ensure that the odbc driver is in your environment path.
Type: Error
Severity: 30
Time: Sun Jul 03 20:11:39 2011
File: project/webcomm/rpcserver.cpp Line: 145
Properties:
Location:
     saw.unknown
Assertion failure: m_pImpl != 0 at line 145 of ./project/webcomm/rpcserver.cpp
Type: Information
Severity: 30
Time: Sun Jul 03 20:43:45 2011
File: project/sawserver/sawserver.cpp Line: 386
Properties: ThreadID-2752
Location:
     saw.sawserver
     saw.sawserver.initializesawserver
     saw.threads

Hi Andy,
First of all,rpd should be in synchronization with the database in order to get the data.
So,you need to create ODBC as in the earlier reply.
than you need to give the details of odbc in connection pool of rpd.
than test the connection by rightclick on table in physical layer and click update row count option if your table gets updated then you will make sure that your rpd is in sync with database.
If you want any instance help you can call me at any time to +919701233345.
Assign points if your problem solved or make it helpful if it helps you.Since,it is encouraging.
Regards,
Lakshmipathi.

Unable to start CRS

Hi experts..we are ahving 2 node RAC in 10g..Last week we took a node down and today when I was trying to bring the node back up I am facing problems with the CRS...Here are the few lines...
root@dcaxogc2[u01/crs/bin]: ./crsctl check crs
CSS appears healthy
Cannot communicate with CRS
EVM appears healthy
root@dcaxogc2[u01/crs/bin]: ./crsctl start crs
Attempting to start CRS stack
The CRS stack will be started shortly
root@dcaxogc2[u01/crs/bin]: ./crsctl stop crs
Stopping resources. This could take several minutes.
Error while stopping resources. Possible cause: CRSD is down.
root@dcaxogc2[u01/crs/bin]: ./crsctl start resources
Starting resources.
Error while starting resources. Possible cause: CRSD is down.
root@dcaxogc2[u01/crs/bin]: ./srvctl start instance -d ogcdb -i ogcdb2
PRKP-1001 : Error starting instance OGCDB2 on node dcaxogc2
root@dcaxogc2[u01/crs/bin]: ./crs_stat
IOT/Abort trap(coredump)
Alert log content
2011-05-16 12:33:41.245
[crsd(651330)]CRS-1012:The OCR service started on node dcaxogc2.
2011-05-16 12:33:42.041
[crsd(651330)]CRS-1201:CRSD started on node dcaxogc2.
2011-05-16 12:34:01.675
[crsd(651364)]CRS-1012:The OCR service started on node dcaxogc2.
2011-05-16 12:34:02.432
[crsd(651364)]CRS-1201:CRSD started on node dcaxogc2.
I dont know where the problem is coming from...how to start the CRSD? i think this might be the error.....If I am wrong please correct me...Any suggestions please....
Thanks for your time...

do it on both nodes
./crsctl start crs
wait for few minutes and check
./crsctl check crs
if all services comes up
check
./crs_stat -t
if resources not coming up, check the clusterware file logs
The Cluster Ready Services Daemon (crsd) Log Files
Log files for the CRSD process (crsd) can be found in the following directories:
CRS home/log/hostname/crsd
Oracle Cluster Registry (OCR) Log Files
The Oracle Cluster Registry (OCR) records log information in the following location:
CRS Home/log/hostname/client
Cluster Synchronization Services (CSS) Log Files
You can find CSS information that the OCSSD generates in log files in the following locations:
CRS Home/log/hostname/cssd
Event Manager (EVM) Log Files
Event Manager (EVM) information generated by evmd is recorded in log files in the following locations:
CRS Home/log/hostname/evmd
RACG Log Files
The Oracle RAC high availability trace files are located in the following two locations:
CRS home/log/hostname/racg
$ORACLE_HOME/log/hostname/racg
Core files are in the sub-directories of the log directories. Each RACG executable has a sub-directory assigned exclusively for that executable. The name of the RACG executable sub-directory is the same as the name of the executable.
refer the link:-
http://download.oracle.com/docs/cd/B19306_01/rac.102/b14197/appsupport.htm

Unable to start MYSQL service on Mac Mini

Trying to installed JAMF software on Mac Mini server. One of the configuration steps required setting up a database from the terminal but it requires the MYSQL service to be running and I'm unable to get this service to start. Any ideas or suggestions?
Mike

What happens when you try to start it? Any messages shown in the logs?

No eprint icon on my printer /unable to start web services

I have a HP officejet 65001 plus special edition. windows 7 64 bit. I do not have a eprint icon on my printer nor am I able to start web services. Message unable to complete update. Just prints out a page as follows:Connect h10141.www1.hp.com:80 HRRP/1.0 Proxy authorization: Basic Og==. Please help me. I have updated firmware. Powered off/on. Have spent numerous hours trying to get this to work!!!! Yhank you

Hi karenames50,
I apologize for the inconvenience of this error message, I just have a couple of questions to confirm some information.
How did you update the firmware?
Can you confirm the printer firmware is this version?: CIP1FN1126AR
( You can find this information by printing a printer status report, under Setup(Tool icon)>Reports>Printer Status Report
If that is the current firmware version they you can try to power down both the printer and the router. Then power on the router, let it come fully online, then power on the printer. Once all devices are fully powered on try activating web services again.
Please let me know the result.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Unable to start subscription service for Adobe Photoshop CS5

Hi there.
I'm trying to install Adobe Photoshop CS5 on my laptop and every time, after installing the product and entering the serial number, the process fails and tells me 'We are unable to start your subscription for Adobe Photoshop CS5 Subscription Edition.'
It then asks me to relaunch the product and do the installation process again. I have tried this numerous times and it keeps saying the same thing.
Please help!

Best contact Adobe Customer Support; start from http://helpx.adobe.com/contact.html
[topic moved to Downloading, Installing, Setting Up forum]

Error: Unable to start the services !!!!!!!

After restarting the Sww QA server i am getting the below error message ,I am not able to start the services
Below is the error :
<u><b>ERROR:</b></u>
The database
DRIVER=SQL
Server;SERVER=SWWSQLPRVSR1;UID=WindowsBGinfo;PWD-tricky;APP=BGInfo;WSID=FLMIRLET10373XP;DATABASE=WindowsBGinfo cannot be opened
Please ensure the database exists and is accessible
Regards,
Mag.

Hi,
Following string
PWD-tricky
Should be:
PWD=tricky
Regards,
Marcin

Unable to start crs services

Similar Messages

Maybe you are looking for