Unable to start Illustrator CS6 64-bit on Windows 7

I installed the CS6 Master Upgrade yesterday and almost all of the apps are working correctly. However, when I try to open Illustrator CS6 64-bit it returns this error message: "The application was unable to start correctly (0xc000007b). Click OK to close the application." The 32-bit version works correctly. Any suggestions or similar cases? Thanks.

CreativeCollab wrote:
I feel like I need to chime in here. I just installed my new Master Collection of CS6 all my x64 applications were working with the exception of Illustrator x64. I Googled the heck out of this and found so much back and forth between adobe saying it's a microsoft issue (.net framework and redistributables) and microsoft saying it's an Adobe issue.
My windows installation is fairly fresh, but for the heck of it I tried unexpectedpanda's solution of uninstalling/re-installing the Microsoft Visual C Libraries. I followed the instructions to the letter, I even went so far as to uninstall/re-install .net itself. No luck.
I saw the Lightroom (error unable to start correctly) fix mentioned in a few places, and thought frick I've tried EVERYTHING else. I did the following to fix this annoying issue:
1) Download the Lightroom fix (mentioned in the link from crebimacedo)
2) Extract the .dll files from the .zip. There are 2 files; msvcr80.dll and msvcr100.dll
3) Opened folder Adobe Illustrator CS6 (64 Bit)/Support Files/Contents/Windows
4) The above folder already contains the msvcr80.dll so I did NOT overwrite it. I simply copied and paste the msvcr100.dll into the above folder.
5) Tried to launch Illustrator CS6 (x64) and imagine that. WORKING!
To me this says that this was indeed an Adobe issue and their installer appears to be missing a file. Especially when a fix file from their website resolves the issue.
I would also just like to add that I have confirmed that this file already existed in my C:\Windows\System32 and in C:\WindowsSysWOW64 so my OS was NOT missing it as a .dll; again reiterating that it appears to make this an Adobe issue.
Good luck to the rest.
This one works for me ...

Similar Messages

Illustrator CS6 64-bit Crashes When Opening Files

This is a problem that has been plaguing me since I moved to CS6 64-bit (on a Windows 7 machine). I've only seen it in Illustrator:
Seemingly randomly once or twice a week, I will click on an AI file in Windows Explorer to open it, and Illustrator will crash to the desktop. There is no consistency to the files that I've been able to find. Some are local to my hard drive, and some are on the network. It could be a file I've opened several times the same day already or a file I haven't opened in months. I restart Illustrator and everything's fine— I can access the file, no problem.
The only trait that I have sussed out is that it seems to happen more frequently if I've left the computer idle for 20 minutes or so, which is well below the sleep time-out for my hard drive. It's almost like Illustrator doesn't know how to wait for a file if the file isn't immediately available. (The files are not open elsewhere.) I've read that Illustrator is cranky with files on network locations, but this happens more frequently with local files.
Program files are loaded from an SSD, but the scratch disk is my local HD and my files are stored on the HD. My scratch disk was originally the SSD, but the problem occured almost every day under that configuration. Moving the scratch disk to the HD made the crashes occur less frequently.
The event log for yesterday's crash doesn't seem to be particularly helpful. (Posted below.)
Is this behavior familiar to anyone? I have been searching Adobe's forums and the web in general with no luck for the last year. My apologies if this has been addressed elsewhere in the forums and I haven't found it.
Thanks in advance for any advice!
Log Name:      Application
Source:        Application Error
Date:          6/26/2013 2:38:35 PM
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Description:
Faulting application name: Illustrator.exe, version: 16.0.3.691, time stamp: 0x50bb31df
Faulting module name: Illustrator.exe, version: 16.0.3.691, time stamp: 0x50bb31df
Exception code: 0xc0000005
Fault offset: 0x000000000066d8c8
Faulting process id: 0x1030
Faulting application start time: 0x01ce72527a68524e
Faulting application path: C:\Program Files\Adobe\Adobe Illustrator CS6 (64 Bit)\Support Files\Contents\Windows\Illustrator.exe
Faulting module path: C:\Program Files\Adobe\Adobe Illustrator CS6 (64 Bit)\Support Files\Contents\Windows\Illustrator.exe
Report Id: 9b76be3b-de8f-11e2-b99d-00259049948b
Event Xml:

Thanks for the suggestion. I'll give that a shot... but wouldn't other applications be experiencing the same thing? I open Photoshop files all day and it's never happened. I'm in and out of CorelDraw as well. (I don't open Corel files in Illustrator.) I also see no disk errors in the event log, but, as I said, I'll check for updates because that couldn't hurt, right? :-)
Thanks again.

CS5 plugin to work on Illustrator CS6 64-bit?

Hello,
I have a plugin that should work on both Illustrator CS5 and CS6. CS6 also supports 64-bit illustrator.
Can i create a 64-bit configuration for the CS5 SDK and make the plug-in work on Illustrator CS6 64-bit?
Thanks

I don't know if its possible to build a single binary that works in both anymore. Its definitely possible to have a code base that generates two without a whole lot of problems though -- we do it
The main problem is that in CS6, none of the legacy suites are present (unlike CS5 and earlier). Also, a lot of types have changed (and its going to get worse next version since they've indicated they're going to change AIReal from float to double). So if it is possible to make a single binary, its a very short window where its useful because I can guarantee it won't work for CS7 (CS6.5?).

Illustrator CS6 64-bit dvaui.dll and msvcr100.dll crashing problem, any solution?

First things first, trying to find a tech support Email address or phone number has been infuriating. The "3-step support wizard" which results in "go to the forums" is also infuriating and insulting.
I have a Windows 7 64-bit PC running CS6 64-bit (updated/current), and it's crashing at random (2-3 times per day). I see events recorded in the event log showing dvaui.dll and msvcr100.dll as the source. Other people have raised this as an issue, and all I see are guesses. Does Adobe have a credible solution for this yet?
I've tried running as a domain admin, which did not help.
Illustrator CS6 32-bit seems to be working perfectly (4 days straight, no crashing).
It seems to currently affect only one computer (5 others are fine). It's not repeatable, and has no discernible cause.
Also, format and reinstall is neither a solution nor an option.
To be honest, I'm looking for Adobe to address this directly: do you know why this is happening, and how long until it is solved? If an Adobe tech support will open a case, I have a file that the designer (I'm not the designer) was using during one of the crashes. I don't know if the crashing will be related (to the file), but I have the file just in case.
David.

Hi Larry,
Thank you for responding.
> CS6 is current in that it is still available for purchase and in the CC but it is now two versions behind.
I'm not quite sure what you are trying to say. Can you be explicit, please?
> As to your problem have you tried downloading the .dll files from Microsoft and reinstalling them?
I have copied and re-registered the DLL files from a known-good machine (that is to say that the machine doesn't exhibit any of the symptoms as the above machine), which did not help.
I'm really interested in having Adobe respond directly to this issue. I know they are aware of it.
It's clear that Adobe doesn't actually want to support this program, but people rely on it for their economic success. Both my client and his employees need this program to function properly and reliably, and I think anyone would agree that it's reasonable to expect that a problem like this (that affects more than just us) be, at a minimum, addressed. Adobe has my client's money, they had no problem accepting it. With that acceptance comes a duty to be responsive.
Thanks,
David.

Every time I start Illustrator CS6 I get an error message: "Error loading plugin AIHostAdapter.aip.

Every time I start Illustrator CS6 I get an error message:
"Error loading plugin AIHostAdapter.aip. I have tried reloading the program, updating, everything. I've checked the forums but no one seems to have a solution

I am not sure. Here is a screenshot. Many people are having this problem. I am wondering what it is and what it does exactly and can't seem to find an answer to that question.
I deleted Illustrator CS6 yesterday and reloaded the program. I am on a Mac, Maverick 10.9. The strange thing is the dates. All plugins [in the file] correspond with the Illy CS6 reload except that particular Plugin?
Can I delete the file or is it a necessary plugin?

Adobe Illustrator CS6 (64 Bit)でpsdがリンク配置されたファイルが開けない

CS６スタンダードでAdobe Illustrator CS6 (64 Bit)をwin8のOSで使用しています。
最近客先で作成したファイルを開けなくなりました。
① 作成したファイルにpsdファイルがリンクされており
[○○○.psd]というリンクファイルの読み込みに必要なプラグインが見つかりません。「置換」を選択し別の・・・・
というメッセージがでます。
②新規作成でも配置でpsdファイルを設定しようとしてもエラーになり取り込めません。
③別のＰＣでは問題なく①のファイルも開けます。
CS6ごと再インストールを何度かしましたがだめです。
解決方法はないでしょうか？
気になるのは最近ですがプラグインで株式会社地理情報開発の
PlugX-Clipper2.5 win版をインストしました。
よろしくお願いします。

別のPCでは問題がないということですから、Illustratorの環境ファイル系かOS環境側に何か根っこがありそうですね。類似の報告は海外のフォーラムでも見かけましたが、いずれも回答がついていませんでした。おそらく開発者にデバッグしてもらわないと原因追及が難しいレベルの現象で、我々としては何かが壊れていると考えて対処するしかなさそうです。
ついては、まずはCS6の完全削除と再インストールを以下の文書を参考に徹底的にやってみるのが良いと思います。
以前のバージョンを含むすべての Adobe アプリケーションを削除し Creative Suite 6 を再インストールする（Windows 7/Vista）
インストールトラブル用の CS Cleaner Tool（Creative Cloud | Creative Suite 3/4/5.x/6）
PlugX-Clipper2.5については、一旦ここまで削除してしまえば、再度インストールするまでは影響は考慮しなくて良いのではないかと思います。
OS環境側に問題があるとすれば、OSのクリーンインストールまで考えなければなりませんが、これは正直しんどいですよね。たぶん一発で解決するとは思いますが……。
以下蛇足です。今回はエラー内容からプラグイン関連のトラブルである可能性は否定できません。プラグインはIllustratorの起動時に読み込まれ、プラグインが備える自身の機能をIll ustrator側に伝える仕組みを通じ、Illustratorが全てのプラグインの情報を整理統合して、Illustrator自身の機能の一部として取り込むのですが、整理統合に失敗してpsdファイルを取り扱うプラグインがどれだかわからなくなってしまうことはあるかもしれません。プラグインの情報はキャッシュしているようですので、一度失敗するとそのまま覚えてしまう可能性もあります。PlugX-Clipper2.5はファイル形式に関する機能は持っていないはずで通常は無関係と考えられますが、Illustratorが覚えているプラグイン情報を書き換えるきっかけにはなっているため、100%除外することもできません。問題の起きていない環境にPlugX-Clipper2.5を入れて再現するか確認し、もし再現したらクロということになりますので、余力があったら試してみて下さい……。

Yosemite and unable to open Illustrator CS6

Hi
Since changing to Yosemite I am unable to open Illustrator CS6 and I get the following message:
"To open "Adobe Illustrator CS6" you need to install the legacy Java SE 6 runtime."
I have followed the link and downloaded "Java for OS X 2014-001" as instructed but doing this does not change anything and I am still unable to open Illustrator.
Can anyone help me and explain to me what I need to do to be able to use Illlustrator again!
Thank you very much.

Teresa, biuzalel,
You should be able to get round the issue altogether without the legacy version (and its security implications), by following this:
http://oliverdowling.com.au/2014/03/28/java-se-8-on-mac-os-x/
It is even more thoroughly described in this thread, see post #3 on by gator soup:
https://forums.adobe.com/thread/1706469

Several daily crashes in Illustrator CS6 64-Bit

Hello,
After a long hard struggle with CS6 32-bit, Windows XP and 4 GB RAM, we decided to do our designers a favor and install Windows 7 Pro 64-Bit, 16 GB RAM and a new SSD for them, in order to speed up their daily work. Besides that, the PC is equipped with an i7-2600k and some HP-motherboard (it's an HP Elite 8200 with the beforementioned upgrades).
The good news is, that it has increased the speed greatly.
The bad news is, that Illustrator (the 64-bit version) has a tendency to crash several times each day. I havent' been able to find a pattern, unfortunately, but here's log-files from event viewer:
Faulting application Illustrator.exe, version 16.0.0.682, faulting module 4f6e45b7, version MSVCR100.dll, fault address 0x10.0.40219.325
Faulting application Illustrator.exe, version 16.0.0.682, faulting module 4f6e45b7, version dvaui.dll, fault address 0x6.0.0.0.
I've seen a few threads regarding the first crash, which suggested, that we should run Illustrator with administrative priveleges. So we did that (setting the permissions in the shortcut), but with no luck. I have absolutely no idea what dvaui.dll is, though.
The user is a local administrator, which should rule out any permission-issues in my eyes.
Any ideas on how to proceed?
Best regards,
Thomas

We are having the same issue and unable to find a common pattern. We reformatted the PC and reinstalled Illustrator.
Logged in as a local administrator and domain administrator, same issue.
Cleared Settings & Preferences, same issue.
Turned off Preferences sync, same issue.
Turned off AVG, same issue.
Unable to find a common pattern at all.
Problem signature:
Problem Event Name: APPCRASH
Application Name: Illustrator.exe
Application Version: 18.0.0.18
Application Timestamp: 53880380
Fault Module Name: dvaui.dll
Fault Module Version: 8.0.0.0
Fault Module Timestamp: 536d4782
Exception Code: c0000005
Exception Offset: 00000000002fafea
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Information 1: bd8c
Additional Information 2: bd8c6776c4e051ed4b6064776f680c83
Additional Information 3: 3e48
Additional Information 4: 3e483067cb25453b65b9d2c9125e19e9

Plantage d'illustrator avec des images importées (CS6 64 bits pour Windows)

Bonjour,
Je travaille (en entreprise) sous Adobe CS6 (64 bits). Depuis ce matin, lorsque j'essaie d'enregistrer (ou d'imprimer) mes compositions qui contiennent une image importée, Illustrator se ferme avec une petite fenêtre windows "Illustrator a cessé de fonctionner".
Je suis certain que c'est la faute aux images importées car tout fonctionne très bien quand je n'enregistre que des textes ou que des formes (plume, autres,...).
Je voulais savoir si ce bug était répertorié (je n'ai rien trouvé sur internet) et quelle pourrait en être la solution ?
Merci d'avance,
Cordialement

Re-bonjour Machinvert,
Il faut savoir qu'un compte utilisateur et donc restreint peut être la cause du problème, il faut savoir que ce type de compte ne vous donne pas un access total en droit de lecture et d'écriture comparativement à un compte administrateur.
Un compte en serveur peut être également le problème dû par la configuration faite et de leurs paramètres different de ceux d'un compte local normal Windows.
Si votre collègue a eu le même problème et me doutant que la configuration des comptes Windows soit indientique à la vôtre, cela peut expliquer le problème et donc il faudrait dès lors faire un test sur un compte Admnisitrateur en local Windows.
La désinstallation n'est pas la solution appropriée étant donnée que le problème ses presente sur 2 PC different, sauf, si l'installation a été faite en déploiement et dès lors il faudrait peut-être revoir et voir refaire l'installation si celle-ci n'a pas donné un succès escompte.
Une coupure de courant a certainement cree pas mal de problème dans l'ordinateur comme certainement au niveau du serveur.
Je ne pourrais vous conseiller que de prendre contact avec votre service informatique et de leur faire part de mes notifications.
Merci de votre comprehension.
Arnaud.

Unable to open Illustrator CS6 in Mac OS X Yoesemite

Hope somebody an help me here, every time I try to open Illustrator CS6 it will open almost to the point of being able to open a file but then closes and tells me there "Adobe Illustrator quit unexpectedly" It used o open no problem in an older version of Mac OS and I have no problems opening Photoshop CS6. Does anyone know what is going on with this? The bizarre thing is it will open if I go through Finder, Apps, Illustrator, Show package contents, Contents, Mac OS, Adobe Illustrator it opens fine, it's just a pain in the rear to go that route.
Thanks

Please refer to: Creative Cloud Desktop Applications and Mac OS X “Yosemite” « Adobe Creative Cloud
You may also refer to:
Adobe Creative Cloud CC Yosemite 10.10 Fix
OSX Yosemite compatibility with CC?
https://forums.adobe.com/thread/1111652
Regards
Rajshree

Unable to Start Listner for 10g R2 after windows xp pro restart.

Database worked just fine until a system reboot after installing the Apache server and Apex 2.2 The service start and I'm able to connect to the database SQL*PLUS without specifying the host string
SQL*PLUS
User Name: xxxxx
Password : xxxxx
Host String: <Blank>
connect without any problem.
Once I include the orcl name I can't connect and get the following error message
TNS-12541: TNS: no listner
LSNRCTL> start
Starting tnslsnr: please wait...
Service OracleOraDb10g_home1TNSListener already running.
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
LSNRCTL>
# tnsnames.ora Network Configuration File: C:\oracle\product\10.2.0\Db_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
#Oracle Database 10g Enterprise Edition\
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
listner.ora as following
# listener.ora Network Configuration File: C:\oracle\product\10.2.0\Db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\Db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
I have another home for the Apache Server.
Everything was just fine, Oracle, Apache, EM, and Apex.
I checked the path for windows it looks good, checked the registery looks good, two homes listed.
When I check the status for the LISTNER is win Service it show start
OracleOraDb10g_home1TNSListener
I have another listner OracleOraDb10g_home1TNSListenerLISTNER1 I don't know why it's there?
TNSPING ORCL WORKS
WITH THE SAME EORROR MESSAGE
PING WORK FOR THE HOST IP NO PROBLEM.
Please see the following to Analyze the Problem:
C:\oracle\product\10.2.0\db_1\BIN>lsnrctl status orcl
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 16-MAR-2007 21:24
:50
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=127.0.0.1)(PORT=1521))(C
ONNECT_DATA=(SERVICE_NAME=orcl)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
C:\oracle\product\10.2.0\db_1\BIN>lsnrctl services
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 16-MAR-2007 21:25
:23
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=127.0.0.1)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
C:\oracle\product\10.2.0\db_1\BIN>lsnrctl start
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 16-MAR-2007 21:25
:41
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting tnslsnr: please wait...
Service OracleOraDb10g_home1TNSListener already running.
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
C:\oracle\product\10.2.0\db_1\BIN>path
PATH=C:\oracle\product\10.2.0\Db_1\bin;C:\oracle\product\10.2.0\Db_1\jre\1.4.2\b
in\client;C:\oracle\product\10.2.0\Db\jre\1.4.2\bin;;C:\oracle\product\10.2.0\db
\bin;C:\oracle\product\10.2.0\db\jlib;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\
System32\Wbem;"C:\Program Files\Zone Labs\ZoneAlarm\MailFrontier";C:\Program Fil
es\Common Files\Roxio Shared\DLLShared;D:\Program Files\Microsoft Visual Studio\
Common\Tools\WinNT;D:\Program Files\Microsoft Visual Studio\Common\MSDev98\Bin;D
:\Program Files\Microsoft Visual Studio\Common\Tools;D:\Program Files\Microsoft
Visual Studio\VC98\bin
C:\oracle\product\10.2.0\db_1\BIN>sqlplus
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Mar 16 21:26:44 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter user-name: system
Enter password:
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> show user
USER is "SYSTEM"
SQL> select name from v$database;
NAME
ORCL
SQL>
IN THE PAST I WAS ABLE TO CONNECT TO ALL BUT NOW,
I'M UNABLE TO LOGIN TO APEX NEITHER EM DUE TO ORCL LISTNER.
Like I said before I have no problem connecting to SQL*PLS, BUT I can't Login to orcl APEX nor EM.
Any suggestion or solutions is really apreciated. I'm looking forward to hear from you ACES.......
Thank You Very Much,
Mhnd

Hi
Check this out.
TNS-12560: "protocol adapter error"
Cause: A generic protocol adapter error occurred.
Action: Check addresses used for proper protocol specification.
For further details, turn on tracing and reexecute the operation. Turn off tracing when the operation is complete.
TNS-00530: "protocol adapter error"
Cause: A generic protocol adapter error occurred.
Action: For further details, turn on tracing and reexecute the operation.
Proposed Solution on metalink.
Solution Description:
=====================
Delete the protocols in your "listener.ora" file that you do not use.
Edit the "listener.ora" file and look at the protocol section. Make sure that
only the protocols that you use on your system are there (i.e., TCP, IPC, ...)
and that there are no entries listed for SPX or NMP (named pipes).
Regards
Adnan
Since you are only using TCP I don't think that is the issue. You should turn on tracing to get more details.
Message was edited by: Adnan
amashhadi

Unable to Start Listner for 10g R2 after windows xp pro restart. Please!

Database worked just fine until a system reboot after installing the Apache server and Apex 2.2 The service start and I'm able to connect to the database SQL*PLUS without specifying the host string
SQL*PLUS
User Name: xxxxx
Password : xxxxx
Host String: <Blank>
connect without any problem.
Once I include the orcl name I can't connect and get the following error message
TNS-12541: TNS: no listner
LSNRCTL> start
Starting tnslsnr: please wait...
Service OracleOraDb10g_home1TNSListener already running.
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
LSNRCTL>
# tnsnames.ora Network Configuration File: C:\oracle\product\10.2.0\Db_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
#Oracle Database 10g Enterprise Edition\
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
listner.ora as following
# listener.ora Network Configuration File: C:\oracle\product\10.2.0\Db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\Db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
I have another home for the Apache Server.
Everything was just fine, Oracle, Apache, EM, and Apex.
I checked the path for windows it looks good, checked the registery looks good, two homes listed.
When I check the status for the LISTNER is win Service it show start
OracleOraDb10g_home1TNSListener
I have another listner OracleOraDb10g_home1TNSListenerLISTNER1 I don't know why it's there?
TNSPING ORCL WORKS
WITH THE SAME EORROR MESSAGE
PING WORK FOR THE HOST IP NO PROBLEM.
Please see the following to Analyze the Problem:
C:\oracle\product\10.2.0\db_1\BIN>lsnrctl status orcl
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 16-MAR-2007 21:24
:50
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=127.0.0.1)(PORT=1521))(C
ONNECT_DATA=(SERVICE_NAME=orcl)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
C:\oracle\product\10.2.0\db_1\BIN>lsnrctl services
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 16-MAR-2007 21:25
:23
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=127.0.0.1)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
C:\oracle\product\10.2.0\db_1\BIN>lsnrctl start
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 16-MAR-2007 21:25
:41
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting tnslsnr: please wait...
Service OracleOraDb10g_home1TNSListener already running.
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
C:\oracle\product\10.2.0\db_1\BIN>path
PATH=C:\oracle\product\10.2.0\Db_1\bin;C:\oracle\product\10.2.0\Db_1\jre\1.4.2\b
in\client;C:\oracle\product\10.2.0\Db\jre\1.4.2\bin;;C:\oracle\product\10.2.0\db
\bin;C:\oracle\product\10.2.0\db\jlib;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\
System32\Wbem;"C:\Program Files\Zone Labs\ZoneAlarm\MailFrontier";C:\Program Fil
es\Common Files\Roxio Shared\DLLShared;D:\Program Files\Microsoft Visual Studio\
Common\Tools\WinNT;D:\Program Files\Microsoft Visual Studio\Common\MSDev98\Bin;D
:\Program Files\Microsoft Visual Studio\Common\Tools;D:\Program Files\Microsoft
Visual Studio\VC98\bin
C:\oracle\product\10.2.0\db_1\BIN>sqlplus
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Mar 16 21:26:44 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter user-name: system
Enter password:
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> show user
USER is "SYSTEM"
SQL> select name from v$database;
NAME
ORCL
SQL>
IN THE PAST I WAS ABLE TO CONNECT TO ALL BUT NOW,
I'M UNABLE TO LOGIN TO APEX NEITHER EM DUE TO ORCL LISTNER.
Like I said before I have no problem connecting to SQL*PLS, BUT I can't Login to orcl APEX nor EM.
Any suggestion or solutions is really apreciated. I'm looking forward to hear from you ACES.......
Thank You Very Much,
Mhnd

Hi
Check this out.
TNS-12560: "protocol adapter error"
Cause: A generic protocol adapter error occurred.
Action: Check addresses used for proper protocol specification.
For further details, turn on tracing and reexecute the operation. Turn off tracing when the operation is complete.
TNS-00530: "protocol adapter error"
Cause: A generic protocol adapter error occurred.
Action: For further details, turn on tracing and reexecute the operation.
Proposed Solution on metalink.
Solution Description:
=====================
Delete the protocols in your "listener.ora" file that you do not use.
Edit the "listener.ora" file and look at the protocol section. Make sure that
only the protocols that you use on your system are there (i.e., TCP, IPC, ...)
and that there are no entries listed for SPX or NMP (named pipes).
Regards
Adnan
Since you are only using TCP I don't think that is the issue. You should turn on tracing to get more details.
Message was edited by: Adnan
amashhadi

Unable to start Oracle Process Manager from the windows services for OBIEE

Hi,
I have OBIEE 11g installed on a 32-bit windows machine. Of the two windows services installed, I am unable to start the Oracle Process Manager. When I try to start it I get the following error:
Error 1053: The service did not respond to the start or control request in a timely fashion.
At the back end, this service is calling the file opmn.exe which is placed at MIDDLEWAREHOME\Oracle_BI1\opmn\bin. On trying to execute this file the error we get is:
The procedure entry point longjmp could not be located in the dynamic link library orauts.dll
I have tried replacing the orauts.dll file, but to no avail.
Please let me know if you have any clue regarding what is to be done.
Thanks
Naman

Hi Naman,
This error occurs for the following reasons,
*Path variable is not set properly
*Multiple Oracle homes exists in the same machine.
Follow the below steps and let me know if it works,
1. Select My Computer -> Right Click -> Properties
2. In the System Properties screen go to Advanced Tab
3. Click on Environment Variables
4. In the System Variables section select PATH variable & Click edit
5. Now you will find that it will contain invalid directories. Remove the incorrect entries. This may happen when you have multiple oracle homes in the same machine
6. Restart the service.
Rgds,
Dpka

Illustrator CS6 keeps crashing in Windows 8.1

Both the 32-bit and 64-bit of Illustrator CS6 crashes when attempting to open. I haven't been able to find a solution to the problem.
Any assistance is appreciated.
Thank you!

You need to provide the crash info from the event viewer. If both versions crash, something is terribly wrong on your system liek a critical DLL missing.
Mylenium

Unable to start Oracle Soa suite 10g on Windows 7

I am able install oracle soa suite 10g on Windows7 platform. But I am unable to start Oracle Soa Suite 10g. Wenever I am starting the SOA suite a new window is popping up the default color scheme of windows 7 is getting changed, but after that this window is disappearing without showing any error. From the task manager console I can see that a javaw process is getting started, but this opmn process is not getting started.
System configuration -
OS : Windows7
RAM: 2 GB
SOA Suite installation : Default (Including JDK and DataBase configuration).
If you have any resolution to this strange problem please let me know. Thanks in advance.

I would be surprised if the amount of RAM in your machine is a limiting factor...
These blog posts contain useful info when running SOA Suite with resources on the low end of the spectrum. You could also use the [BPM AMI on Amazon EC2|http://www.deltalounge.net/wpress/2010/06/soa-suite-11gr1-ps2-notes-and-blogs/] ...
hth

Unable to start Illustrator CS6 64-bit on Windows 7

Similar Messages

Maybe you are looking for