Unable to start opmn process.

Hi group,
I have done a new fresh install of Ebusiness Suite release 12.1.1 in a Windows 2003 Server, but at Validate System Configuration Post Install steps there are some failures. After that I am trying to start "opmn" process without any process.
F:\ORAEBS\apps\tech_st\10.1.3\opmn\bin>opmnctl startall
opmnctl: starting opmn and all managed processes...
Could not create process by
C:\OracleClient10gR2\opmn\bin\opmn.exe -a -q ping
with error The system cannot find the file specified.
(GetLastError()=2
Timed out waiting for OPMN to initialize. OPMN may be down or
taking a long time to initialize. Will not attempt to start
processes because OPMN is unreachable. If OPMN is initializing,
retrying the command may prove successful. If OPMN is down,
correct the underlying problem before retrying the command.
Any advice or help to solve this problem will be really appreciated.
Thanks in advance.
Kind regards,
Francisco Mtz. Oviedo

Hi Hussein,
The error that I see in the logfile is:
checking URL = http://<hostname.domain>:8000
RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
Then I try to start opmn process manually but it fails with next error message:
F:\ORAEBS\apps\tech_st\10.1.3\opmn\bin>opmnctl startall
opmnctl: starting opmn and all managed processes...
Could not create process by
C:\OracleClient10gR2\opmn\bin\opmn.exe -a -q ping
with error The system cannot find the file specified.
(GetLastError()=2
Timed out waiting for OPMN to initialize. OPMN may be down or
taking a long time to initialize. Will not attempt to start
processes because OPMN is unreachable. If OPMN is initializing,
retrying the command may prove successful. If OPMN is down,
correct the underlying problem before retrying the command.
AutoConfig was executed by Installation process.
Thanks in advance.
Kind regards,
Francisco Mtz. Oviedo

Similar Messages

OAS Startup OWS-08820: Unable to start oassrv process 'oassrv'.

Dear OAS Product Manager, Oracle fellows & Developer Guys,
I am using Win NT 4.0 Server, Servie Pack 5 (1280)
on Intel Pentium III 550MHz PC - 256MB ram.
8GB Hard Disk 1 with C,D,E,F drives and
another 4GB Hard Disk with G,H drives,
all with FAT.(I have got Win98 in C:)
I have got:
1) Oracle8 (8.0.4) at D:\ORANT
2) Devloper2000 at D:\ORANT
3) Oracle8i (8.1.6) at G:\Oracle8i
4) JDeveloper 3.1 at F:\JDeveloper 3.1
Then I installed OAS 4.0.8.1 at F:\OAS (after closing
all running Oracle processes) with the "Complete" option.
After reboot, I logged into the Oracle Application
Server Manager, and tried to start "ALL" as mentioned in the
documentation. I got the following message:
Site
Please wait while the command is being processed on host elysium ...
Starting ORB process...
waiting for ORB to be ready...
The command completed successfully on host elysium.
oassrv: Starting wrb service 0
ConfigProvider Server accepting requests...
oassrv: Starting wrb service 1
Log Server is accepting requests now...
oassrv: Starting wrb service 2
PANIC: YS::ERROR::BADFRAME in oassrv at line 66 of
m:\nt_4081_40bit_opt_102099\ows\srchome\ys\src\ys\yse.c
abnormal program termination
OWS-08820: Unable to start oassrv process 'oassrv'.
Initialization Failure- Exiting OAS...
Execute STOP of all the OAS Processes from the OAS Manager
Nothing much is described for this error in the Error Messages section of the documentation.
Please help me out.
Anuj Patel
[email protected]

Check if there is no a pid or trace or any file that is created during the start of this kind of process and remove it and try again. As well you may check if there is a java process from the console kill it and start it.
Greetings

ERROR   ORA-12514: TNS: unable to start extract process

Hi Experts,
I have installed Oracle Golden Gate in the below environment.But unable to start extract process
Primary site (source): This is production DB and up and running.
RAC 2 nodes
Oracle RAC 11.2.0.1.0
ASM
Oracle GoldenGate 11g Release 1 (11.1.1.0.0)
Enterprise Linux Server release 5.5 (Carthage)
Processor Type x64
OS 64 bit
target Site (destination):
Standalone single server - Non RAC
Oracle version 11.2.0.1.0
ASM
Oracle GoldenGate 11g Release 1 (11.1.1.0.0)
Enterprise Linux Server release 5.5 (Carthage)
Processor Type x64
OS 64 bit
Getting below error in logs while starting extract process:
RECOVERY: reset to initial or altered checkpoint.
2012-08-05 10:34:10 ERROR   OGG-00868 Oracle GoldenGate Capture for Oracle, aaa.prm: Attaching to
ASM server asm: (12514) ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor.
2012-08-05 10:34:10 ERROR   OGG-01668 Oracle GoldenGate Capture for Oracle, aaa.prm: PROCESS
ABENDING.[oracle@ ggate]$
Getting below error while connecting with asm instance directly:
[oracle@ admin]$ sqlplus sys@asm as sysasm
SQL*Plus: Release 11.2.0.1.0 Production on Sun Aug 5 11:16:11 2012
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
[oracle@ ~]$ tnsping asm TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 05-AUG-2012 11:55
:42
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = xxx-
scan)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = ASM) (I
NSTANCE_NAME = +ASM1)))
OK (0 msec) Any help Please ?
Regards
LazyDBA
Edited by: LazyDBA11g on Aug 5, 2012 12:14 AM
Edited by: LazyDBA11g on Aug 5, 2012 11:25 PM
Edited by: LazyDBA11g on Aug 12, 2012 4:36 AM

Hello JK,
Thanks a lot for specific response.
SQL> select INST_ID, NAME, VALUE from gv$parameter where name like '%_listener%';
INST_ID NAME VALUE
1 local_listener (DESCRIPTION=(ADDRESS_LIST=(AD
DRESS=(PROTOCOL=TCP)(HOST=xxx_
data1-vip)(PORT=1521))))
1 remote_listener xxxdata-scan:1521
2 local_listener (DESCRIPTION=(ADDRESS_LIST=(AD
DRESS=(PROTOCOL=TCP)(HOST=xxx_
data2-vip)(PORT=1521))))
2 remote_listener xxxdata-scan:1521
If I add REMOTE_LISTENER pointing to SCAN ip address, Does it require DB bounce ? (Its production DB)
Regards,
LazyDBA
Edited by: LazyDBA11g on Aug 10, 2012 12:01 PM
Edited by: LazyDBA11g on Aug 12, 2012 4:48 AM

OPMN unable to start EMAGENT Process now. (till yesterday it was working fi

Hi Experts,
Today when I started OPMN my OID server was up but EMAGENT is down. (till yesterday it was working fine).
I even run, opmnctl startproc process-type=EMAGENT
but could not start EMAGENT.
Below are the log content.
Help Appreciated.
cat emagent.trc
==========================================================
2012-08-28 18:39:37,181 Thread-1081063744 ERROR command: nmejcn: received error in header from repository at http://localhost.localdomain:7001/em/upload/: "ERROR-Job system not enabled in repository-less mode."
==================================================================
cat emagent.log
=============================================================
2012-08-28 17:22:50,924 Thread-3806068096 EMAgent started successfully (00702)
2012-08-28 17:25:27,602 Thread-1130600768 /home/oracle/middlewareR1/oid1/EMAGENT/EMAGENT/sysman/dump/emagent_4079_20120828172527.diagtrc dumped (00900)
2012-08-28 17:26:21,135 Thread-1121151296 /home/oracle/middlewareR1/oid1/EMAGENT/EMAGENT/sysman/dump/emagent_4079_20120828172621.diagtrc dumped (00900)
2012-08-28 17:28:01,023 Thread-1121151296 No such metric ldap_config. Filename /home/oracle/middlewareR1/idm/sysman/admin/default_collection/oracle_ldap.xml (00400)
2012-08-28 17:28:01,023 Thread-1121151296 No such metric ECM_ASSOCIATIONS. Filename /home/oracle/middlewareR1/idm/sysman/admin/default_collection/oracle_ldap.xml (00400)
2012-08-28 17:42:40,337 Thread-1094404416 No such metric ldap_config. Filename /home/oracle/middlewareR1/idm/sysman/admin/default_collection/oracle_ldap.xml (00400)
2012-08-28 17:42:40,337 Thread-1094404416 No such metric ECM_ASSOCIATIONS. Filename /home/oracle/middlewareR1/idm/sysman/admin/default_collection/oracle_ldap.xml (00400)
2012-08-28 17:42:40,395 Thread-1121151296 /home/oracle/middlewareR1/oid1/EMAGENT/EMAGENT/sysman/dump/emagent_4079_20120828174240.diagtrc dumped (00900)
~ ======================================================================================
emagent.nohup do not have any error.

I even added below line in opmn.xml but did not helped :(
<start timeout="120" retry="3"/>
<stop timeout="120"/>
<restart timeout="120"/>
<ping timeout="120" interval="20"/>
</process-set>
cat emctl.log
================================================
8016 :: Tue Aug 28 19:30:55 2012::AgentLifeCycle.pm: Processing asstart agent
8016 :: Tue Aug 28 19:30:55 2012::AgentLifeCycle.pm: EMHOME is /home/oracle/middlewareR1/oid1/EMAGENT/EMAGENT
8016 :: Tue Aug 28 19:30:55 2012::AgentLifeCycle.pm: service name is
8016 :: Tue Aug 28 19:30:55 2012::AgentLifeCycle.pm:status agent returned with retCode=3
=================================================================
Edited by: IgnitedMind on 28/08/2012 02:32

Unable to start Oracle Process Manager from the windows services for OBIEE

Hi,
I have OBIEE 11g installed on a 32-bit windows machine. Of the two windows services installed, I am unable to start the Oracle Process Manager. When I try to start it I get the following error:
Error 1053: The service did not respond to the start or control request in a timely fashion.
At the back end, this service is calling the file opmn.exe which is placed at MIDDLEWAREHOME\Oracle_BI1\opmn\bin. On trying to execute this file the error we get is:
The procedure entry point longjmp could not be located in the dynamic link library orauts.dll
I have tried replacing the orauts.dll file, but to no avail.
Please let me know if you have any clue regarding what is to be done.
Thanks
Naman

Hi Naman,
This error occurs for the following reasons,
*Path variable is not set properly
*Multiple Oracle homes exists in the same machine.
Follow the below steps and let me know if it works,
1. Select My Computer -> Right Click -> Properties
2. In the System Properties screen go to Advanced Tab
3. Click on Environment Variables
4. In the System Variables section select PATH variable & Click edit
5. Now you will find that it will contain invalid directories. Remove the incorrect entries. This may happen when you have multiple oracle homes in the same machine
6. Restart the service.
Rgds,
Dpka

Unable to start OPMN service

Hi group,
I have applied patch 12.1.2 and followed some steps to configure SOA Gateway and after that I am unable to start Apache Server.
I have enabled "debug" option in opmn.xml file as follow:
<debug path="F:\ORAEBS_APPS\inst\apps\EBSTEST_srvoracle05\logs\ora\10.1.3\opmn\opmn.dbg" comp="internal;ons;pm" rotation-size="1500000" rotation-hour="0" />
But nothing is created in opmn.dbg file.
Service is started in Windows, but when I try to query it, it displays as follow:
F:\ORAEBS_APPS\inst\apps\EBSTEST_srvoracle05\admin\scripts>adopmnctl.cmd start
Thu 05/13/2010 01:15 PM
Starting Oracle Process Manager (OPMN) ...
CALL F:\ORAEBS_APPS\apps\tech_st\10.1.3\opmn\bin\opmnctl.exe start
Service is already running
opmnctl: opmn already running
STATE : 4 RUNNING
exiting with status 0
ERRORCODE = 0 ERRORCODE_END
F:\ORAEBS_APPS\inst\apps\EBSTEST_srvoracle05\admin\scripts>adopmnctl.cmd status
Thu 05/13/2010 01:15 PM
Checking status of OPMN managed processes...
Unable to connect to opmn.
Opmn may not be up.
exiting with status 2
ERRORCODE = 2 ERRORCODE_END
Any advice or help will be really appreciated.
Thanks in advance.
Kind regards,
Francisco Mtz. Oviedo

Hussein,
I don't get any error when I stop and start using Services Windows.
You know, file opmn.dbg is empty and there is no file opmn.log at F:\ORAEBS_APPS\inst\apps\EBSTEST_srvoracle05\logs\ora\10.1.3\opmn
I am able to run AutoConfig without any problem.
This is what I am getting when I try to use command mode:
F:\ORAEBS_APPS\inst\apps\EBSTEST_srvoracle05\admin\scripts>adapcctl.cmd start
Thu 05/13/2010 01:33 PM
Unable to connect to opmn.
Opmn may not be up.
Oracle Process Manager Deamon (OPMN) is not running
exiting with status 1
ERRORCODE = 1 ERRORCODE_END
F:\ORAEBS_APPS\inst\apps\EBSTEST_srvoracle05\admin\scripts>adapcctl.cmd status
Thu 05/13/2010 01:34 PM
Checking status of OPMN managed processes...
Unable to connect to opmn.
Opmn may not be up.
exiting with status 2
ERRORCODE = 2 ERRORCODE_END
F:\ORAEBS_APPS\inst\apps\EBSTEST_srvoracle05\admin\scripts>adopmnctl.cmd status
Thu 05/13/2010 01:34 PM
Checking status of OPMN managed processes...
Unable to connect to opmn.
Opmn may not be up.
exiting with status 2
ERRORCODE = 2 ERRORCODE_END
F:\ORAEBS_APPS\inst\apps\EBSTEST_srvoracle05\admin\scripts>adopmnctl.cmd start
Thu 05/13/2010 01:34 PM
Starting Oracle Process Manager (OPMN) ...
CALL F:\ORAEBS_APPS\apps\tech_st\10.1.3\opmn\bin\opmnctl.exe start
Service is already running
opmnctl: opmn already running
STATE : 4 RUNNING
exiting with status 0
ERRORCODE = 0 ERRORCODE_END
Thanks in advance.
Kind regards,
Francisco Mtz. Oviedo

Oracle Application Server-Unable to start "WebCache" process.

Hello,
Using "Oracle Application Server" 10g. Right Now, I am getting below error while starting oracle application server by using below commands.
./opmnctl startall ( To start entire oracle service modules)
./opmnctl startproc process-type=WebCache
Both commands giving below error.
./opmnctl startproc process-type=WebCache
opmnctl: starting opmn managed processes...
================================================================================
opmn id=warlock3:6200
0 of 1 processes started.
ias-instance id=ias_admin.warlock3
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
WebCache/WebCache/WebCache
Error
--> Process (pid=250340)
failed to start a managed process after the maximum retry limit
Log:
/oracle/ora10gas/opmn/logs/WebCache~WebCache~1
Also, WebCache event log is showing below message.
[28/Sep/2010:13:23:30 -0530] [notification 9610] [ecid: -] The server is exiting.
[28/Sep/2010:13:23:30 -0530] [alert 9000] [ecid: -] Process 250338 exit(1) at 890:main.c [Build 10.1.2.0.2 050802]
[28/Sep/2010:13:23:32 -0530] [notification 9612] [ecid: -] OracleAS Web Cache 10g (10.1.2), Build 10.1.2.0.2 050802
[28/Sep/2010:13:23:32 -0530] [notification 9403] [ecid: -] Maximum number of file/socket descriptors set to 900.
[28/Sep/2010:13:23:32 -0530] [notification 13002] [ecid: -] Maximum allowed incoming connections are 700
[28/Sep/2010:13:23:32 -0530] [alert 13305] [ecid: -] Failed to assign port 7777: Address already in use
[28/Sep/2010:13:23:32 -0530] [alert 9707] [ecid: -] Failed to start the server.
[28/Sep/2010:13:23:32 -0530] [alert 9609] [ecid: -] The server process could not initialize.
[28/Sep/2010:13:23:32 -0530] [notification 9610] [ecid: -] The server is exiting.
[28/Sep/2010:13:23:32 -0530] [alert 9000] [ecid: -] Process 250340 exit(1) at 890:main.c [Build 10.1.2.0.2 050802]
Kindly let me know how to solve this issue.
Regards,
Nishith N.Vyas.

Hi,
I have not experience with Oracle Names resolution, but did you start the server "NAMESCTL> START" ? (I'm not sure)
On the client, the SQLNET.ORA file contains an entry that lists onames first in the NAMES.DIRECTORY_PATH parameter ?
e.g.: NAMES.DIRECTORY_PATH=(onames, tnsnames, hostname)
There are some messages on the listener.log file ?
Cheers

Unable to start OracleBIJavaHostC process.

Hi All,
I was trying deploying Opatch on OBIEE 11.1.2.2.0 in between this process BI services stop working.when i use "opmnctl status" command it gives me the information that "OracleBIJavaHostC status is down".After that i execute "opmnctl startproc ias-component=coreapplication_obijh1' command to start this OPMN process but get this error message
ias-component/process-type/process-set:
coreapplication_obijh1/OracleBIJavaHostComponent/coreapplication_obijh
error
-> Process (index=1,uid=85986559,pid=3892)
failed to start a managed process after the maximum retry limit
Log:
none'".
Any help would be appreciated.
Regards
SBM

Please see if below metalink note helps you:-
OBIEE 11g: Error: "failed to start a managed process after the maximum retry limit" Java Host Component (coreapplication_obijh1) Failed During Configuration (Installation) and Does Not Start [ID 1207103.1]
Thanks,
JD

Libclntsh missing . unable to start opmn - EBS12.1 OEL6.6

which package contains this library ? i have installed the required compat rpms.
[applmgr@OEL6EBS12 ebs]$ ls -l ./db/tech_st/11.1.0/lib32/libclntsh.so.11.1
ls: cannot access ./db/tech_st/11.1.0/lib32/libclntsh.so.11.1: No such file or directory
[applmgr@OEL6EBS12 ebs]$ ls -l ./apps/tech_st/10.1.2/lib/libclntsh.so
lrwxrwxrwx 1 oracle dba 58 Apr 2 03:51 ./apps/tech_st/10.1.2/lib/libclntsh.so -> /home/oracle/ebs/apps/tech_st/10.1.2/lib/libclntsh.so.10.1
[applmgr@OEL6EBS12 ebs]$ ls -ltr /home/oracle/ebs/apps/tech_st/10.1.2/lib/libclntsh.so.10.1
ls: cannot access /home/oracle/ebs/apps/tech_st/10.1.2/lib/libclntsh.so.10.1: No such file or directory
[applmgr@OEL6EBS12 ebs]$
root@OEL6EBS12 ~]# rpm -qa | grep compat
libreport-compat-2.0.9-15.0.1.el6.x86_64
nss_compat_ossl-0.9.6-1.el6.x86_64
xz-lzma-compat-4.999.9-0.3.beta.20091007git.el6.x86_64
compat-libstdc++-296-2.96-144.el6.i686
xorg-x11-libs-compat-6.8.2-1.EL.33.0.1.i386
redhat-lsb-compat-4.0-7.0.1.el6.x86_64
rarian-compat-0.8.1-5.1.el6.x86_64
compat-libstdc++-33-3.2.3-69.el6.i686
compat-db43-4.3.29-15.el6.i686
[root@OEL6EBS12 ~]#
Edited by: user12004411 on Apr 2, 2013 9:38 AM
Edited by: user12004411 on Apr 2, 2013 9:40 AM

hi Hussein !
according to the notes i should have installed both 32 and 64 bit versions for glibc-devel , which i did.
[root@OEL6EBS12 scripts]# rpm -qa | grep glibc-devel
glibc-devel-2.12-1.107.el6.i686
glibc-devel-2.12-1.107.el6.x86_64
[root@OEL6EBS12 scripts]# rpm -qa | grep compat
libreport-compat-2.0.9-15.0.1.el6.x86_64
nss_compat_ossl-0.9.6-1.el6.x86_64
xz-lzma-compat-4.999.9-0.3.beta.20091007git.el6.x86_64
compat-libstdc++-296-2.96-144.el6.i686
xorg-x11-libs-compat-6.8.2-1.EL.33.0.1.i386
redhat-lsb-compat-4.0-7.0.1.el6.x86_64
rarian-compat-0.8.1-5.1.el6.x86_64
compat-libstdc++-33-3.2.3-69.el6.i686
compat-db43-4.3.29-15.el6.i686
I tried to restart the opmn but getting the following error:
I saw a note on forums about this error n suggestion of putting the compat rpms which i already have .
[root@OEL6EBS12 scripts]# ./adapcctl.sh start
You are running adapcctl.sh version 120.7.12010000.2
Starting OPMN managed Oracle HTTP Server (OHS) instance ...
libopmnoraclenls.so: unable to load
/home/oracle/ebs/inst/apps/VIS_oel6ebs12/ora/10.1.3/opmn/bin/opmnctl: line 898: 2352 Segmentation fault (core dumped) $OPMNADMIN ping
libopmnoraclenls.so: unable to load
libopmnoraclenls.so: unable to load
/home/oracle/ebs/inst/apps/VIS_oel6ebs12/ora/10.1.3/opmn/bin/opmnctl: line 898: 2361 Segmentation fault (core dumped) $OPMNADMIN pingwait
opmnctl: opmn start failed.
libopmnoraclenls.so: unable to load
/home/oracle/ebs/inst/apps/VIS_oel6ebs12/ora/10.1.3/opmn/bin/opmnctl: line 1008: 2373 Segmentation fault (core dumped) $OPMNADMIN ping
opmnctl: opmn is not running.
adapcctl.sh: exiting with status 0
adapcctl.sh: check the logfile /home/oracle/ebs/inst/apps/VIS_oel6ebs12/logs/appl/admin/log/adapcctl.txt for more information ...

Unable to start opmn- ONS

Hi Experts,
The customer asked me to create Auto start/stop scripts for Application server. I tested my scripts manually for both Infrastructure & Middle Tier.
On automating them my opmn process starts to fail and i found the below error in ons.log file.
08/02/23 20:18:37 [4] ONS server initiated
08/02/23 20:18:37 [4] Connection 1,10.123.109.20,6200 connect (Connection refused)
08/02/23 20:20:36 [4] Connection 1,10.123.109.20,6200 connect (Connection refused)
08/02/23 20:22:35 [4] Connection 1,10.123.109.20,6200 connect (Connection refused)
08/02/23 20:24:34 [4] Connection 1,10.123.109.20,6200 connect (Connection refused)
08/02/23 20:26:33 [4] Connection 1,10.123.109.20,6200 connect (Connection refused)
08/02/23 20:28:32 [4] Connection 1,10.123.109.20,6200 connect (Connection refused)
Any help/suggestions are very much appreciated in resolving the above issue.
Thanks,
~Pointer~

Hi,
I believe you have already got the answers. Running as Oracle works and running from script it does not work.
So problem lies how the script is run. Ensure to have 'sudo' to oracle from the script and execute and test it.
Secondly the error in ONS does not necessarily relate to the starting problem.
08/02/23 20:18:37 [4] Connection 1,10.123.109.20,6200 connect (Connection refused)
08/02/23 20:20:36 [4] Connection 1,10.123.109.20,6200 connect (Connection refused)
The above error happens when the components not able to communicate to notication server.
This problem occurs if there is conflict in tcp port:6200
+ Check the ons.conf file to verify if the port is correct.
+ If you have database installed, ensure that it is not using the same ons port. If so, change to some different port.
+ Restart the opmn components.
Regards,
Chanth K

Unable to start BPm process

Hi
I have a process model with a start process (wsdl which takes some inputs) and then next task assigned to a dynamic user based on inputs in start process.
While I try to start the process manually from nwa by giving inputs i see teh error "Failed to start the process; Process manager adapter may not be started; error= com.sap.glx.adapter.api.AdapterException: Process start failed due to TransitionException"
This error pops up randomly whenever I change some user mapping at the second level task (not start process and next task)
Any clues?
Regards
Lavanya

Hi Lavanya,
Could you please tell me how you resolved. I am also getting same error.
com.sap.glx.adapter.api.AdapterException: Process start failed due to TransitionException
Thanks in advance.
cheers,
dev

Unable to start the process chain

Hi ,
I am trying to start a process chain manually , but it gives me a message saying process has no predecesssor ?
what should be done to start the chain?

Did you copy processes from another chain? Sometimes when this happens, you end up copying all the processes.
First, remove the process chain from scheduling. In RSPC, at the top, select Process Chain --> Remove from Schedule. This will delete all the batch jobs for the process chain.
Next, move all the processes in the process chain with your mouse. Sometimes the maintenance will put one process on top of another so you cannot see them all. By moving all the processes, you may find the "unattached" process so you can remove it from the process chain.
Hope it helps..

Unable to start opmn

i am trying to start opmn using opmn command.... but i get the following error:
opmn: error while loading shared libraries: libmodapi.so: cannot open shared object file: No such file or directory
can someone please help me

hey links is fine....anyways.......This is what it contains:
1)LD_LIBRARY_PATH:
On Solaris, make sure the value contains the following directory:
$ORACLE_HOME/lib32
On Linux, make sure the value contains the following directory:
$ORACLE_HOME/lib
On HP-UX, make sure the value contains the following directory:
$ORACLE_HOME/lib
On IBM AIX, make sure this environment variable is not set.
(IBM AIX only) LIBPATH
If the calling application is a 32-bit application, make sure the value contains the following directory:
$ORACLE_HOME/lib32
If the calling application is a 64-bit application, make sure the value contains the following directory:
$ORACLE_HOME/lib
(Solaris only) LD_LIBRARY_PATH_64
Make sure the value contains the following directory:
$ORACLE_HOME/lib
(HP-UX only) SHLIB_PATH
Make sure the value contains the following directory:
$ORACLE_HOME/lib32
2)ORACLE_HOME
Set to the full path of the installation's Oracle home
3)PATH
Make sure the value contains the following directories, which contain basic commands used by all installations:
$ORACLE_HOME/bin
$ORACLE_HOME/opmn/bin
-vivek

Unable to start Oracle Process manager (instance1) service.

When I try to start this service I get the following error in Event Manager:
Faulting application opmn.exe, version 11.0.0.0, time stamp 0x4ed8d1e8, faulting module yod.dll, version 6.0.6002.18541, time stamp 0x4ec3e855, exception code 0xc0000135, fault offset 0x00000000000b6fc8, process id 0x1ca4, application start time 0x01cd660277503c3a.
But if I try through the command prompt 'opmnctl start' it works just fine. The problem is now I have to stay logged into the machine, if I log out opmn shuts down.
This is happening on two servers we have this installed on. Windows Server 2008 (NOT R2) 24gb ram. Otherwise it is running just fine.
Very little help on google for this issue. Any help would be great.

Sorry if I was not clear on my issues, but it is when I try to start the windows service, (Oracle Process Manager (instance1), that I get this error in the Event Logs.
Does anyon know the difference between the commands for starting this service through Windows Services and 'opmnctl start'?
Edited by: 844667 on Jul 20, 2012 8:05 AM
Edited by: 844667 on Jul 20, 2012 8:06 AM

Unable to start Oracle Process Manager Service

I installed EPM 11.1.2.1 on Windows 2008 R2.
Oracle database 11g.
I installed and configured every thing was working fine. But suddenly the Oracle Process Manager service is not starting.
I checked in event viewer the following error i found:
The Oracle Process Manager (EPM_epmsystem1) service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
Please help me.

Hi Jasmin,
The error was:
The service did not respond to the start or control request in a timely fashion.
Thanks,
Ravi.

Unable to start opmn process.

Similar Messages

Maybe you are looking for