Unable to start presentation services , in OBIEE 11g

Hi ,
Unable to start presentation services , in OBIEE 11g :
[2013-01-18T13:38:49.000+05:30] [OBIPS] [INCIDENT_ERROR:1] [] [saw.webextensionbase.init] [ecid: ] [tid: ] Invalid item /system/mktgcache/01HW447397/sawguidstate.[[
File:catalogimpl.cpp
Line:660
Location:
     saw.webextensionbase.init
     saw.sawserver
     saw.sawserver.initializesawserver
     saw.sawserver

Follow the steps below:
1.Shutdown all OBIEE services.
2.Replace the files sawguidstate and sawguidstate.atrin the location:
<Instance_Home>\instances\<instance_name>\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1\catalog\<project>\root\system\mktgcache\<name>
with the same files from a backup or from another working instance.
3.Restart all OBIEE services.

Similar Messages

  • Unable to start presentation services in obiee 10g

    Hi,
    Everythig is fine untill I restart the machine. I havent done any changes before restarting my mahcine. Once restarted the presenttion services are not starting.
    Error: "Windows could not start BI Presentation server on local computer.For more information,review the system event log.if this is non-microsoft service,contact the service vendor, and refer to service specific error code-1".
    I have checked instanceconfig.xml and catalog folders, paths, rpd etc.. But no use.
    sawlog file give me the error:
    Allocation of SQLEnvironment failed (SQLError: -1). Please ensure that the odbc driver is in your environment path.
    How to resove it..
    Thanks.

    Need few checks from your side:
    1) Start BI Server and open RPD line mode, if you able to open then check instanceconfig file to make sure the tag is
    <DSN>AnalyticsWeb</DSN> is matching with ODBC dsn for 'Oracle BI Server'
    If this looks good then
    2) use different name for tag CatalogPath from instanceconfig file and start the Presentation service
    let us know updates
    Make sure you have this in path Drive:\OracleBI\server\Bin
    Edited by: veeravalli on Nov 16, 2012 11:36 AM

  • Error while starting BI services of OBIEE 11g

    Hi,
    while starting the BI services of OBIEE 11g I am getting the below error in browser page. How to solve this?
    Error 500--Internal Server Error
    From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
    10.5.1 500 Internal Server Error
    The server encountered an unexpected condition which prevented it from fulfilling the request.
    Thanks,

    Hi,
    the complete url
    http://10.154.19.91:9704/analytics/saw.dll?bieehome&startPage=1
    Actually the installation was did by some other.
    So i didnt understand what you explained before.
    can you elabroate.
    Thanks,

  • Error in starting BI services of OBIEE 11g

    Hi,
    while starting the BI services for OBIEE 11g. After entering the the user name and password for weblogic server. Iam getting as wls.alive. It is not proceeding and the process stops. The obiee page is not opening.

    Hi sateesh,
    Seems your database listerner and opmnctl is down....first start these in your services pane and then try starting your BI server....but keep in mind close the admin tool if it is open .
    This might also help [http://gerardnico.com/wiki/dat/obiee/start_11g]
    By,
    KK

  • Unable to sign in presentation services in OBIEE 11g

    Hi All,
    I had installed OBIEE11g. Installation gone fine. all the services are up and running except scheduler.
    I am able to login to Weblogic console and Enterprise manager, but I am not able to login to Presentation services. When I try to login it says Unable to Sign In (An Invalied User Name and Password).
    Can any one guide me to overcome the issue.
    Regards,
    Kumar

    Hi,
    Go through this.. OBIEE 11g Cluster Controller Failed to start
    Thanks,
    Srikanth

  • Not able to start the services in obiee 11g

    Hi ,
    I installed the obiee 11 on my laptop and obiee 10 was also installed on it.the installation went fine and the url also came up fine.
    But when i am again trying to open the url the it is not coming also checked the oracle business intelligence folder after the installation it created only one folder for 11 and 10 and start bi services is not there it is only showing the start oc4j.

    hi,
    try invoking 11g services (nqsserver, presentation server, java host, admin tool ) through command prompt and see if it is working
    thanks
    -nag
    http://www.obinotes.com

  • Regarding Presentation services in obiee 11g

    Hi All,
    i am getting a strange problem.
    the presentation services starting again and again.when i login it the services goes down and then automattically started.
    this is happening again-2.
    please help on this problem.

    Hi
    I will give you some inputs.
    Before doing anything take backup please --- Don't' forgot.
    First of all kill all the obiee related services and clear the logs also then start the all services newly.
    If still the problem present please check your logs and post the error in the blog, will try to help you.
    I have faced similar issue long back, I have followed same thing it's working fine.
    Hope it helps.
    Thanks,
    Satya

  • Auto start BI Services for OBIEE 11G

    Hi,
    We have installed OBIEE 11.1.1.7 on Windows 2008 64 bit operating system and we have restarted the server after successful install.
    Now the issue is OBIEE is not accessible after reboot,it is running only if i run the Start BI Services under All Programs --> Oracle Business Intelligence --> Start BI Services and
    this not accessible once i log off from the server.
    I don't want very time login and start the obiee using all programs,instead i want to install a Windows service that will all run the BI Services,so that Users can access the OBIEE independent of
    my login.
    I tried many times installing the services for  Admin and BI Server but even though the services are install/running successfully,but still not able to access the OBIEE URL.
    https://blogs.oracle.com/pa/entry/obiee_11_1_1_how3
    http://gerardnico.com/wiki/dat/obiee/windows_service_11g
    Service have been installed but not able to access the OBIEE..
    What i am missing ....
    Thanks in advance...

    Hey Archie,
    Refer to these threads once:
    regarding the coreapplication_obips1  service OBIEE 11g
    Re: OBIEE 11g Cluster Controller Failed to start
    Re: getting OPMN error while starting Oracle SOA Suite ( This is not related to OBIEE, but you still might find something useful )
    Regards,
    -Amith.

  • Unable to start Presentation Services- Windows 7

    Hi,
    I'm unable to start the Presentation Services , when i do so i am getting a message "Internet Explorer cannot display the webpage"
    Windows 7 ultimate.
    All services started like BI server, BI Presentation and Java Host
    Installation were successful, able to open Repository.
    BI Publisher is also getting started.
    I need to look into the Answers, unable to start the Presentation Services, any help is very much appreciated !
    Thanks

    Hi,
    Can you past it sawlog0.log message also Make sure below points (just double check and test it)
    1) Check your instanceconfig.XML file (better if u have back up plz restore it then change it u r current catalog)
    2) In the RPD, go to Manage -> Variables. Look through your initialization blocks and see if any are being used to set the USER variable.
    3) make sure if have LDAP settup (external table via init blog)
    4) if you can back of your RPD,Catalog restore it then try to access it (for testing) if its works then u r current issue catalog may be corrupted webcat
    if your providing sawlog0.log ..it will be easy to find the issues
    Thanks
    Deva

  • Unable to Start Presentation service

    Hi All,
    I am unable to start the presentation service. The logs shows following error message. Could you please guide me
    racle BI Presentation Services 10.1.3.4.1 (Build 090414.1900) are starting up.
    Type: Error
    Severity: 20
    Time: Sun Jul 03 20:11:39 2011
    File: project/webodbcaccess/odbcenvironment.cpp Line: 98
    Properties: ThreadID-2308
    Location:
         saw.webextensionbase.staticinit
         saw.sawserver
         saw.sawserver.initializesawserver
         saw.threads
    ODBC driver preload failed. ODBC library name: 'nqsodbc.dll'
    Type: Error
    Severity: 20
    Time: Sun Jul 03 20:11:39 2011
    File: project/webodbcaccess/odbcenvironment.cpp Line: 100
    Properties: ThreadID-2308
    Location:
         saw.webextensionbase.staticinit
         saw.sawserver
         saw.sawserver.initializesawserver
         saw.threads
    The specified module could not be found.
    Type: Error
    Severity: 42
    Time: Sun Jul 03 20:11:39 2011
    File: project/webodbcaccess/odbcenvironment.cpp Line: 195
    Properties: ThreadID-2308
    Location:
         saw.webextensionbase.staticinit
         saw.sawserver
         saw.sawserver.initializesawserver
         saw.threads
    Allocation of SQLEnvironment failed (SQLError: -1). Please ensure that the odbc driver is in your environment path.
    Type: Error
    Severity: 20
    Time: Sun Jul 03 20:11:39 2011
    File: project/sawserver/winmain.cpp Line: 74
    Properties: ThreadID-2308
    Location:
         saw.sawserver.initializesawserver
         saw.threads
    Allocation of SQLEnvironment failed (SQLError: -1). Please ensure that the odbc driver is in your environment path.
    Type: Error
    Severity: 30
    Time: Sun Jul 03 20:11:39 2011
    File: project/webcomm/rpcserver.cpp Line: 145
    Properties:
    Location:
         saw.unknown
    Assertion failure: m_pImpl != 0 at line 145 of ./project/webcomm/rpcserver.cpp
    Type: Information
    Severity: 30
    Time: Sun Jul 03 20:43:45 2011
    File: project/sawserver/sawserver.cpp Line: 386
    Properties: ThreadID-2752
    Location:
         saw.sawserver
         saw.sawserver.initializesawserver
         saw.threads

    Hi Andy,
    First of all,rpd should be in synchronization with the database in order to get the data.
    So,you need to create ODBC as in the earlier reply.
    than you need to give the details of odbc in connection pool of rpd.
    than test the connection by rightclick on table in physical layer and click update row count option if your table gets updated then you will make sure that your rpd is in sync with database.
    If you want any instance help you can call me at any time to +919701233345.
    Assign points if your problem solved or make it helpful if it helps you.Since,it is encouraging.
    Regards,
    Lakshmipathi.

  • Unable to start Presentation Services

    Hi all,
    To make ibots work I ran the cryptotools and made all changes in Job Manager and then tried to restart all the services. I could start all the services except presentation and schedule services. And it gives me error " Windows could not start the Oracle Presentation Server on Local Computer. For more information, review the system Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-Specific erro code -1."
    OracleBI version:10.1.3.4
    and log file (sawlog0) shows:
    ==============================================================================================
    Type: Information
    Severity: 30
    Time: Tue Nov 22 09:44:17 2011
    File: project/sawserver/sawserver.cpp Line: 386
    Properties: ThreadID-852
    Location:
         saw.sawserver
         saw.sawserver.initializesawserver
         saw.threads
    Oracle BI Presentation Services 10.1.3.4 (Build 080726.1900) are starting up.
    Type: Error
    Severity: 42
    Time: Tue Nov 22 09:44:17 2011
    File: project/webutil/cipherimpl.cpp Line: 186
    Properties: ThreadID-852
    Location:
         saw.credentialStore.load.file
         saw.sawserver
         saw.sawserver.initializesawserver
         saw.threads
    Invalid encrypted block.
    Type: Error
    Severity: 20
    Time: Tue Nov 22 09:44:17 2011
    File: project/sawserver/winmain.cpp Line: 74
    Properties: ThreadID-852
    Location:
         saw.sawserver.initializesawserver
         saw.threads
    Invalid encrypted block.
    Type: Error
    Severity: 30
    Time: Tue Nov 22 09:44:17 2011
    File: project/webcomm/rpcserver.cpp Line: 145
    Properties:
    Location:
         saw.unknown
    Assertion failure: m_pImpl != 0 at line 145 of ./project/webcomm/rpcserver.cpp
    ==================================================================================================
    the changes i have made in instance config file after crytotools run (shown in bold); copied instance config file..
    <?xml version="1.0" encoding="utf-8"?>
    <WebConfig>
    <ServerInstance>
    <DSN>AnalyticsWeb</DSN>
    <CatalogPath>C:/OracleBIData/web/catalog/paint</CatalogPath>
    <Alerts>
    <ScheduleServer>USER</ScheduleServer>
    </Alerts>
    <AdvancedReporting>
    <ReportingEngine>XmlP</ReportingEngine>
    <Volume>XmlP</Volume>
    <ServerURL>http://USER:9704/xmlpserver/services/XMLPService</ServerURL>
    <WebURL>http://USER:9704/xmlpserver</WebURL>
    <AdminURL>http://USER:9704/xmlpserver/servlet/admin</AdminURL>
    <AdminCredentialAlias>bipublisheradmin</AdminCredentialAlias>
    </AdvancedReporting>
    <JavaHome>C:\Program Files\Java\jdk1.5.0_11</JavaHome>
    <BIforOfficeURL>client/OracleBIOffice.exe</BIforOfficeURL>
    <!-- To configure a limited set of languages to be available to users uncomment the <AllowedLanguages> tag below and choose a subset set of language tags from the list. Values must be comma separated. -->
    <!-- <AllowedLanguages>ar,cs,da,de,el,en,es,fi,fr,hr,hu,it,iw,ja,ko,nl,no,pl,pt,pt-br,ro,ru,sk,sv,th,tr,zh,zh-tw</AllowedLanguages> -->
    <!-- To configure a limited set of locales to be available to users uncomment the <AllowedLocales> tag below and choose a subset set of locale tags from the list. Values must be comma separated. -->
    <!-- <AllowedLocales>ar-dz,ar-bh,ar-dj,ar-eg,ar-iq,ar-jo,ar-kw,ar-lb,ar-ly,ar-ma,ar-om,ar-qa,ar-sa,ar-so,ar-sd,ar-sy,ar-tn,ar-ae,ar-ye,cs-cz,da-dk,de-at,de-ch,de-de,de-li,de-lu,el-gr,en-au,en-ca,en-cb,en-gb,en-hk,en-ie,en-in,en-jm,en-nz,en-ph,en-us,en-za,en-zw,es-ar,es-bo,es-cl,es-co,es-cr,es-do,es-ec,es-es,es-gt,es-hn,es-mx,es-ni,es-pa,es-pe,es-pr,es-py,es-sv,es-uy,es-ve,fi-fi,fr-be,fr-ca,fr-ch,fr-fr,fr-lu,fr-mc,hr-hr,hu-hu,id-id,it-ch,it-it,iw-il,ja-jp,ko-kr,ms-my,nl-be,nl-nl,no-no,pl-pl,pt-br,pt-pt,ro-ro,ru-ru,sk-sk,sv-fi,sv-se,th-th,tr-tr,zh-cn,zh-mo,zh-sg,zh-tw</AllowedLocales> -->
    <!-- <Disconnected><ArchiveIbots>true</ArchiveIbots><DisconnectedDir>disconnected</DisconnectedDir></Disconnected> -->
    *<!-- other settings ... -->*
    *<CredentialStore>*
    *<CredentialStorage type="file" path="C:\OracleBIData\web\config\credentialstore.xml" passphrase="secret"/>*
    *<!-- other settings ... -->*
    *</CredentialStore>*
    *<!-- other settings ... -->*
    </ServerInstance>
    </WebConfig>
    Pls answer as soon as possible as i could not able to proceed.
    thanks
    chandrakanth.

    Hi kanth,
    From the error above mentioned what exactly has went wrong cant be known...But i can assume you are missing some configuration steps.
    Please follow this guide step by step http://download-uk.oracle.com/docs/cd/B40078_02/doc/bi.1013/b31765.pdf
    This might of help too https://kr.forums.oracle.com/forums/thread.jspa?threadID=518291
    hope helps you.
    Cheers,
    KK

  • Got an Error trying to start scheduler services in obiee 11g

    hi,
    when i am trying to start the services in linux through  ./opmnctl startall
    got the following error Please help me out...
    ias-component/process-type/process-set:
      coreapplication_obisch1/OracleBISchedulerComponent/coreapplication_obisch1/
    Error
    --> Process (index=1,uid=1825388282,pid=4701)
      failed to start a managed process after the maximum retry limit
      Log:
      /MiddlewareHome/instances/instance1/diagnostics/logs/OracleBISchedulerComponent/coreapplication_obisch1/console~coreapplication_obisch1~1.log
    Regards,
    Ramaraju

    hi,
    For setting the MDS password:
    On the menu on the left, expand “WebLogic Domain”;
    Right-click “bifoundation_domain;
    On the pop-up menu select “JDBC Data Sources;
    Click “mds-owsm”;
    Select the “Connection Pool” tab;
    Set the password and hit “Apply”;
      To set the BIPLATFORM password:
    Expand “Business intelligence” menu on the left;
    Click the “Deployment” tab;
    Click the “Scheduler” tab under deployment;
    Click “Lock and Edit Configuration” button;
    Set the password and hit “Apply”;
    Click the “Activate Changes” button;
    you can remove AdminServer.lok and bi_server1.lok
    from: \user_projects\domains\bifoundation_domain\servers\AdminServer\tmp
    Restart the services.
    Regards,
    VG

  • Start BI Services as Windows Service in OBIEE 11g

    Hello All,
    We need to Automate the Start BI Services in OBIEE 11g.
    The options that were tried from my side to achieve the same are as follows:
    1) Creating Command files for Admin_Server and BI_Server
    2) Creating Utility files installSvc_Admin.cmd and installSvc_BIServer.cmd.
    3) Created the Boot file.
    4) Ran the Command files.
    Still i am unable to automate the Start BI Services. I have to manually Start the BI Services whenever i login to the RDC.
    Pls help.
    Thanks.
    Regards,
    Ashwinni

    Ashwinni,
    The batch files should be able to solve your problem.
    Can you post your batch file code here for the start up script? I'll see if I can help you troubleshoot.

  • Unabe to start coreapplication_obips1 componenet in OBIEE 11g

    This was working yesterday.. I did something today that is causing it to no longer start.. I don't know what, I have double checked the config files and nothing was changed..
    Only thing I did was set up Proxy Act As.. which was working before I rebooted.. now the service wont start..
    none of the logs really tell me what is wrong.. I have tried starting it from weblogic and looking at errors there..
    I have also tried starting sawserver.exe described here Unabe to start coreapplication_obips1 componenet in OBIEE 11g
    but that doesn't display any error, I just get a windows popup saying it failed to start.. (im on windows 2008 32bit)
    Error 500--Internal Server Error
    From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
    10.5.1 500 Internal Server Error
    The server encountered an unexpected condition which prevented it from fulfilling the request.
    We checked status of all OBIEE components using opmnctl command as below
    F:\MiddlewareHome\instances\instance1\bin>opmnctl status
    All the components are alive except coreapplication_obips1.
    Processes in Instance: instance1
    --------------------------------------------------------------+---------
    ias-component | process-type | pid | status
    --------------------------------------------------------------+---------
    coreapplication_obiccs1 | OracleBIClusterCo~ | 1160 | Alive
    coreapplication_obisch1 | OracleBIScheduler~ | 1604 | Alive
    coreapplication_obijh1 | OracleBIJavaHostC~ | 5484 | Alive
    coreapplication_obips1 | OracleBIPresentat~ | N/A | Down
    coreapplication_obis1 | OracleBIServerCom~ | 1236 | Alive
    We started coreapplication_obips1component through command prompt as shown below
    F:\MiddlewareHome\instances\instance1\bin>opmnctl startproc ias-component=coreap
    plication_obips1
    F:\MiddlewareHome\instances\instance1\bin>opmnctl startproc ias-component=coreap
    plication_obips1
    opmnctl startproc: starting opmn managed processes...
    ================================================================================
    opmn id=hdccrmcoe4:9501
    0 of 1 processes started.
    ias-instance id=instance1
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ias-component/process-type/process-set:
    coreapplication_obips1/OracleBIPresentationServicesComponent/coreapplication
    _obips1/
    Error
    --> Process (index=1,uid=1245712603,pid=6816)
    failed to start a managed process after the maximum retry limit
    Log:
    none

    Hi Merlin,
    Few days back i faced the same issue .I installed the both 10g and 11g on same machind i bounced the presentation services and restarted the opmnctl its up!!
    Dont know the reason all the ports are different.You can try to increase the scalability of presentation services to "two" and restart all services
    http://download.oracle.com/docs/cd/E17904_01/bi.1111/e10541/cluster.htm#BABCABBC
    Thanks,
    Saichand.v

  • Presentation Variable in obiee 11g

    Hi all ,
    I had a dashboard report with year , quarter , month and order type name as prompts .
    Now my client requirement is , when order type name is "Ord" , the reports with order type name starting with 'ORD" should be displayed.
    In simple i know we will use " Like" operator .
    But now my problem is we have to assign a presentation variable for order type name.
    So can some one tell me how to add a presentation variable in OBIEE 11g , i tried in web , but none of it helped me to finish the job ,, since i am very new to obiee can some one please explain me in non technical language
    Thank you for your help

    Hi Jay , Thank you very much for reply , now i got a little idea , but few doubts abt ur reply .
    Yes i will edit dashboard prompt and assign a like operator and will save the prompt , but when editing the report , you said to apply a filter *LIKE @{presentation_variable}{default_value}%*
    In the above what will be in place of presentation_variable and what should be in default_value.
    I have tried it in this way : Like @{Sales Order Lines Order Type Name} , where Sales Order Lines Order Type Name is my dashboard prompt .
    but it didn't worked when i have given 'Ord' in dashboard prompt the error says: Sales Order Lines Order Type Name is LIKE (pattern match) ord

Maybe you are looking for

  • 5 Elements in XML. 1 is not responding.

    Hi, Im my XML there are 5 elements. Name, Author, Image, Link and time. All the elements are showing via Item Renderer but when I click on the image, the relavent page is not opening. Any suggestion? Thanks Here are my 3 files. <?xml version="1.0" en

  • Safari 4.1.3 crashing all the time on OSX 10.4.11

    I have a iMac g5 running Tiger 10.4.11 and Safari 4.1.3. I installed ClickToFlash about eight months ago which solved all my Safari crashing problems. Now it's back to crashing all the time. I have 300+ GB disk space free. Here is my crash report: Da

  • Ssrs and script from was blocked due to mime type mismatch

    Hi I'm trying to add a script to my header on my SSRS report. I've been following this link: http://blogs.infosupport.com/reporting-services-javascript-injection/ I get error stating: SEC7112: Script from http//####/HCCReportsServer?/ReportsLibrary/s

  • BPM Combine Two Messages

    I'm using PI 7.1, and I have a BPM that receives data and  makes a synchronous call to a database to insert and then return the number of rows inserted.  What I'm trying to do is get a hold of the number of rows inserted in order to add that number t

  • Subtitles under main window duplicating if not enough space

    Hi Gurus! In one of my smartforms I ahve a table node to display customer discounts .Whats happening is that when there is not enough space on the main window on teh first page it just prints the subtitles at the end of main window on teh firat page