Unable to start project

windows 7 64 bit, i5 4 gigs of ram, it has worked in the past.
when i create or start up an old project the screen loads and then a serious error occurs which causes it to fail and then disappear.
ideas?

More information needed.
Got a Problem? How to Get Started
FAQ: Premiere Elements Hanging, or Crashing - Some Tips
Cheers,
Neale
Insanity is hereditary, you get it from your children

Similar Messages

Unable to start User Profile Sync Service

Hi,
I am currently facing some issues with starting the User Profile Sync Service on my SP2013 farm.. I was wondering if someone could help me out a bit.
I have successfully installed the SP2013 farm on a environment that has access to our AD etc. and I have also
restored the database from SP2007 and converted it to Claims authentication etc. The one thing I can’t get to work is to enable the User Profile Sync Service on the server. I have checked quite a bit of TechNet blogs and other sites and tried almost everything
suggested but it still fails. I’ve also recreated the farm from scratch yesterday again but no luck still
L.
The below is what I have done:
Farm Admin account – spadmin2013 is local admin on all SP Farm servers (2 WFE and 2 APP Servers) and has log on locally rights as well on security policy. On the SQL DB it has dbo permissions on the Sync, Profile and Social DB’s.
Farm Service account – spservice-s is a managed farm account that is used to run the various services of the farm (used during the config wizard part).
From within the Admin Control Panel I have verified the managed accounts and it is indeed spadmin2013 which owns the User Profile Sync Service (not the application itself). When I try to start the service it tries to do that for 5-10 minutes and then fails
and goes back to stop and I do not see any error. I have created a custom service application with new database that runs on spadmin2013/spfarm/ldap accounts etc. I can see from the Windows services – FIM and FIMSync service try to start using the spadmin2013
and then go back to disabled. I have also tried giving the spadmin2013 rights to replicate the AD as few blogs suggested that. I am not sure where this is going wrong or what is missing. I had successfully got this to work and still can get it to work on my
first SP2013 server which is a standalone – running SQL, SP app and WFE on the same box.
In fact I also tried to activate this service first before I joined my 3 other servers to the farm and had no luck. I am kinda lost here as to what is going on!

Right. i ran a new log as suggested. I have also cleared the config cache and created a Powershell profile as suggested in this link - http://blogs.msdn.com/b/bryanbolling/archive/2014/01/02/unable-to-start-user-profile-synchronization-service.aspx
I checked the ULS Logs and i can see the below error -
ILM Configuration: Validating account.
ILM Configuration: Validating the system groups
ILM Configuration: Setting up WMI
ILM Configuration: Setting required permissions
ILM Configuration: Create install config file
ILM Configuration: Update source project
ILM Configuration: Changing service account credentials
ILM Configuration: Setting policy for service account
Updating SPPersistedObject UserProfileApplication Name=User Profile Sync Service. Version: 63903 Ensure: False, HashCode: 55647834, Id: ef1ec55c-aa15-4cb7-a9fe-498382a88b4e, Stack:
at Microsoft.Office.Server.Administration.UserProfileApplication.Update()
at Microsoft.Office.Server.Administration.UserProfileApplication.SetupSynchronizationService(ProfileSynchronizationServiceInstance profileSyncInstance)
at Microsoft.Office.Server.Administration.ProfileSynchronizationSetupJob.Execute(SPJobState state)
at Microsoft.SharePoint.Administration.SPTimerJobInvokeInternal.Invoke(SPJobDefinition jd, Guid targetInstanceId, Boolean isTimerService, Int32& result)
at Microsoft.SharePoint.Administration.SPTimerJobInvoke.Invoke(TimerJobExecuteData& data, Int32& result)
SQL connection time: 131.92704 for Data Source=SPSQLAGL;Initial Catalog="Sync DB";Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15;Application Name="SharePoint[OWSTIMER][1][Sync DB]"
ILM Configuration: Configuring database
ILM Configuration: Error 'ERR_CONFIG_DB'
UserProfileApplication.SynchronizeMIIS: Failed to configure MIIS post database, will attempt during next rerun. Exception: System.Configuration.ConfigurationErrorsException: ERR_CONFIG_DB
at Microsoft.Office.Server.UserProfiles.Synchronization.ILMPostSetupConfiguration.ValidateConfigurationResult(UInt32 result)
at Microsoft.Office.Server.UserProfiles.Synchronization.ILMPostSetupConfiguration.ConfigureMiisStage2()
at Microsoft.Office.Server.Administration.UserProfileApplication.SetupSynchronizationService(ProfileSynchronizationServiceInstance profileSyncInstance).
UserProfileApplication.SynchronizeMIIS: End setup for 'User Profile Sync Service'.
Updating SPPersistedObject ProfileSynchronizationSetupJob Name=ProfileSynchronizationSetupJob. Version: 63899 Ensure: False, HashCode: 36296732, Id: 7aeb377f-8bd1-453d-b6be-6a373eaf350d, Stack:
at Microsoft.SharePoint.Administration.SPJobDefinition.Update()
at Microsoft.Office.Server.Administration.ProfileSynchronizationSetupJob.Execute(SPJobState state)
at Microsoft.SharePoint.Administration.SPTimerJobInvokeInternal.Invoke(SPJobDefinition jd, Guid targetInstanceId, Boolean isTimerService, Int32& result)
at Microsoft.SharePoint.Administration.SPTimerJobInvoke.Invoke(TimerJobExecuteData& data, Int32& result)
Leaving Monitored Scope (Timer Job ProfileSynchronizationSetupJob). Execution Time=6041.65717333333
Name=Timer Job User Profile Sync Service_ProfileSynchronizationJob
Updating SPPersistedObject ProfileSynchronizationSetupJob Name=ProfileSynchronizationSetupJob. Version: -1 Ensure: False, HashCode: 13918585, Id: 21e01df1-8772-487d-bd56-f699b3912bda, Stack:
at Microsoft.SharePoint.Administration.SPJobDefinition.Update()
at Microsoft.Office.Server.Administration.UserProfileApplication.StartSynchronizationServiceSetupTimer(String strSyncMachineAddress)
at Microsoft.Office.Server.Administration.UserProfileApplication.SynchronizeMIIS()
at Microsoft.Office.Server.Administration.ILMProfileSynchronizationJob.Execute()
at Microsoft.Office.Server.Administration.UserProfileApplicationJob.Execute(SPJobState jobState)
at Microsoft.SharePoint.Administration.SPTimerJobInvokeInternal.Invoke(SPJobDefinition jd, Guid targetInstanceId, Boolean isTimerService, Int32& result)
at Microsoft.SharePoint.Administration.SPTimerJobInvoke.Invoke(TimerJobExecuteData& data, Int32& result)
Updating SPPersistedObject ProfileSynchronizationSetupJob Name=ProfileSynchronizationSetupJob. Version: 63913 Ensure: False, HashCode: 13918585, Id: 21e01df1-8772-487d-bd56-f699b3912bda, Stack:
at Microsoft.SharePoint.Administration.SPJobDefinition.Update()
at Microsoft.Office.Server.Administration.UserProfileApplication.StartSynchronizationServiceSetupTimer(String strSyncMachineAddress)
at Microsoft.Office.Server.Administration.UserProfileApplication.SynchronizeMIIS()
at Microsoft.Office.Server.Administration.ILMProfileSynchronizationJob.Execute()
at Microsoft.Office.Server.Administration.UserProfileApplicationJob.Execute(SPJobState jobState)
at Microsoft.SharePoint.Administration.SPTimerJobInvokeInternal.Invoke(SPJobDefinition jd, Guid targetInstanceId, Boolean isTimerService, Int32& result)
at Microsoft.SharePoint.Administration.SPTimerJobInvoke.Invoke(TimerJobExecuteData& data, Int32& result)
I have verified the spadmin2013 does have dbo permissions and also is part of security & sysadmin in sql server. I run SQL 2012 with SP1

"The Application was unable to start correctly (0xc000007b). Click OK to close the application" error when starting Visual Studio Community

Hi,
I just installed Visual Studio and when I launch it, the following error pops up: "The Application was unable to start correctly (0xc000007b). Click OK to close the application". I tried searching online but no usable results. Please help!
jd

Hi,
There is not enough information about the problem. For troubleshooting, I recommend you can use Process Monitor to detect whether there's any process failed.
You can download Process Monitor and see how to use it for troubleshooting in below links:
http://support.microsoft.com/kb/939896
http://blogs.technet.com/b/askperf/archive/2007/06/01/troubleshooting-with-process-monitor.aspx
There are a lot of log entries in Process Monitor, you may filter Visual Studio process only(proces = devenv.exe). And you can upload the logs to OneDrive so that we can investigate them.
Also, you can refer to Gfazil's post in
https://social.msdn.microsoft.com/Forums/vstudio/en-US/96035692-9a50-40d4-a7d3-48bda87d11ec/the-application-was-unable-to-start-correctly-0xc000007b-click-ok-to-close-the-application-when?forum=vssetup
Please try the method he mentioned to see whether the problem can occur:
" Replacing the dlls mentioned below from a machine that is working solves the problem:
c:\Windows\SysWOW64\msvcp100.dll
c:\Windows\SysWOW64\msvcp100d.dll
c:\Windows\SysWOW64\msvcr100.dll
c:\Windows\SysWOW64\msvcr100_clr0400.dll
c:\Windows\SysWOW64\msvcr100d.dll "
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

Error message" The file may be damaged or corrupted -1610153464/ also unable to open projects in the background 26:: 142

Hello everyone,
I hope someone can help me.
I am using AE CC/Windows 7 on a Dell computer, 32 GB RAM, 64 bit op system, processors: Intel (R) Xeon (R) CPU x5670 @ 2.93 Ghz 2.93 Ghz (2 processors).
So far I had worked on many projects with no problems and then a few weeks ago the project crashed non stop. The problem was overcome when I got rid of all MP3s and converted them to RAM. Again this was an issue I didn't have in the past and I don't recall changing anything.
Now it seems it is impossible for me to export/render out a project into a Quick time file or even AVI. If its quick time I get this message: After Effects unable to render error an output module failed. The file may be damaged or corrupted -1610153464 and if I am trying to export with AVI I get this message: AE unable to open projects in the background 26:: 142)
This is happening with different projects.
I read the forums and heard that the problem may be a Bug with quicktime and H.264? I never had a problem with it before but again when I try to export AVI I get this error message:
AE unable to open projects in the background
I have a feeling it is quick time related. I have uninstalled and reinstalled QT but still get the problem. It will open old QT files no problem. I tried to download a bug fix update as one post suggested but I think I have the latest which is why it didn't work.
This particular project has a couple of quick media H.264 files. Do I need to convert them? Are they the cause for all of this?
I am sorry I really tried to look for answers in the forums before contacting you here but I cannot find a reason for all this mess, which again only appeared a few weeks ago with no problems for months...if someone can point out an area where I can start looking, I would really appreciate it. Thanks in advance.

update: I converted all the H.264 footage which were in the project to WMV. And I was able to test export with AVI and it turne dout fine (like 10 seconds). However I still got the Error message: "After Effects unable to render error an output module failed, a filme may be corrupted or damaged. Error-1610153464 " when I tried to export H.264 QT..
I don't know what to do now, how can a problem which did not exist suddenly come up. How can I export a QT file? with AVI it will be massive!
Many thanks
Amanda

'Unable to open project File' Please help....

Help. Since yesterday, Final Cut Pro has been crashing every time I have tried to render something. I have used the FSC Maintenance Pack that has been recommended and ran Crash Analyser and Corrupt Clip Finder. No corrupt clips were found and the Crash Analyser fixed the problem for a while and I was able to work for a couple of hours. (prior to this I also removed some Motion files and that also temporarily stopped the crashing). I began working on my project again today, and the same thing started to happen. I kept having to turn everything off at the source until finally I gave up! Just before I turned it off I started running Autosave Cleaner but it seemed to freeze too so I Force Quit it. I have just turned it all back on again and to my horror, my project is not even opening. My other FCP projects are opening but not the one I am working on. I have no idea what to do. Final Cut opens and the message is 'Unable to open Project File'. I am so upset and really hope that someone out there can help.
I run 10.5.8, I have 10 GB memory. All my clips are imported as XDCAM EX 720p25 (original format MPEG HD) but I have been working in this project for weeks without a problem.
Thanks in advance
Gill

I don't know why it is set to the internal disk, but that is the default. That is not project related. It is system related (hence System Settings). So probably you started fcp one without the external disk attached. FCP forces you then to choose another scratch-, waveform-, thumbnail-, autosave location.
Probably you've set it all to the internal disk then.
Next time when the external disk was there again you might have only reset the scratch disk, but not your Autosave location... Just a thought.
That is, IMHO, the disadvantage of system orientated scratch disk settings...
Rienk

Unable to open project files can filters effect this ?

Hi Guys ! I have been a long time reader of the forums and from just observing have always learned a great deal from the discussions. Up until now I have been able to read through post and always find an answer from some of the great advice. As a relatively new Final Cut Editor I have limited knowledge but can edit and have learned enough to structure my work flow and put a project together how I would like it and complete with good results.
I have read a few post on this subject “Unable to open project file” but haven’t seen any with the specifics as my own.
Up until yesterday my files were opening all fine and working perfectly until this last night I had saved and shut down my Mac in the normal fashion. When I tried to open two specific files I was greeted with the infamous “Unable to open Project Files”. These as I can gather are the only two files that will not open and both files have used the RIVER ROCK– Chromatic Glow, or Day for Night Free downloadable Filters in the last 2 weeks could this be the reason ?
I have all the recent updates and have tried going into the Auto Vault and Render files to access the last available versions of these project files. I am able to access those but am only left with a much earlier version of the same project like a version a week earlier without vital changes.
So I would pretty much have to start again.
Any Help would be greatly appreciated
Regards
FC

Hi Tom thanks very much for your reply! , I un mounted the external drive , and reset and created a temporary scratch disk on My Hardrive to get Fce to start.
The 3 projects I have been working on which all were rendered on the 2nd of April around 3 in the afternoon. Two of the Files using the River rock filters are Not accessible from the most recent and up to date versions. The one remaining Project is able to be opened and is the only one not using the filters.
The two files accessed from the auto save vaults before April 1st up to 3pm April 2nd are working and are able to be opened with no problem. Everything after that is not opening which is a real downer as its where the project became near completion but at least I have a time frame of when things started to go wrong.
What would you suggest?

Unable to open project files from 2001

I have a .fcp file and a .fcm file from 2001 that I am unable to get FCP 5 to recognize. For the .fcp it gives the error "Unable to open project file." For the .fcm it says "File error: Wrong type." I don't remember which version of FCP they were made on (perhaps even FCP 1?) but I'm really worried about not being able to open them anymore. Any suggestions, please?

Oh no! I am really in trouble, because this is a very complex project with about a million cuts. What you're basically saying is I should just start over? What other options to I have? There must be some way to convert an old FCP file, no?

Unable to open project file. even though I just saved it.

Hi,
I just started back to work on a little FCE 2 video project after a couple of months. When I went to load the file, it said "Unable to open project file". I thought, "hmmm, I'm a beginner, maybe I'm not opening the right file." So, I made a new project with a clip and save it. Then I tried to reopen it. No go. Same message.
So, something is wrong but I can't figure it out.
My preferences are set to save the file on an external hd. The file icon shows up but says that the FCE project file has 0KB. How can that be?
I look using spotlight for the file, thinking maybe the file was saved elsewhere. It doesn't show up.
Sorry if this subject has been treated before. I searched the forum and didn't find a problem that matched my circumstances. One that was close.
Thanks for any help you can give.
Doug

Thanks for your reply Kyriakos.
Yep, I've tried the files in the AutoSave Vault and still Unable to Open Project File.
Also tried deleting the FCE preference and cache file, fixing permissions and doing a save as instead of a straight save, as outlined in the article below:
http://www.kenstone.net/fcphomepage/good_apps_gonebad.html
It only has worked on one project which is the only file that opens now.
It's driving me nuts! I'm going to start doing some major jobs soon and can't have this happen. Maybe I'll try to reinstall FCE then if no luck it's time for a refund.
Would upgrading from FCE 1 to HD have anything to do with it?
Have you had any luck, Doug?
Pat

"unable to open project file" (fce icon has transparent sheet behind it??)

My most recent save of a project keeps coming up as "unable to open project file". I looked in the autosave and its not there either. The icon for this project has what looks to be a transparent sheet over it or behind it. There are stills in the project, not sure if that has anything to do with it. If anyone knows whats going on I would great greatly appreciate the help.
Thanks,
C

Thanks for your reply Kyriakos.
Yep, I've tried the files in the AutoSave Vault and still Unable to Open Project File.
Also tried deleting the FCE preference and cache file, fixing permissions and doing a save as instead of a straight save, as outlined in the article below:
http://www.kenstone.net/fcphomepage/good_apps_gonebad.html
It only has worked on one project which is the only file that opens now.
It's driving me nuts! I'm going to start doing some major jobs soon and can't have this happen. Maybe I'll try to reinstall FCE then if no luck it's time for a refund.
Would upgrading from FCE 1 to HD have anything to do with it?
Have you had any luck, Doug?
Pat

Robohelp is unable to start Microsoft Word - one more time

Hello,
I read the previous post on this error and though the message is the same, I do not think the circumstances are.
I am using xp prof, office 2010 (recently installed), and after that I recently d/l Robohelp 9 from the website.
I am having many problems involving this message, but I set out today to get the simplest problem i could.
So, i opened RH 9 from the start menu/all programs. I selected 'new project' and filled in the title and file name (project2_title, project2_file)
The RH explorer opens. Word 2010 opens. The RH explorer still has an hourglass. After 1-2 minutes, the hourglass is gone and the error message 'Robohelp is unable to start Microsoft Word' appears.
I click 'ok'
Hourglass, blanked out RH explorer which eventually does return.
I click ctrl_t for a new topic, get the dialog, accept the defaults, and eventually the hour glass goes away and I have the same error message.
I click ok and i do not have the new topic when i expand the topic list.
When i first started this, i was able to add a topic, but no longer. (last week was when i started).
I have also tried to open the existing topic that was created using rh7 and having opened it, tried generating primary layout. I got an error file with an error for almost every topic. (But this can be the next problem).
Thanks for any help you can offer.
Miriam

Hello Miriam Schneidmill,
You can try this workaround.
First of all close Robohelp Word
Go to C:\Users\Username\AppData\Microsoft\Templates
and look for RoboHELP.dot and just rename that file extension to old, ggod or anything you wish, say Robohelp.bad.
Then close this.
Now try to open Robohelp Word and see are you facing the same issue or not?
Hope it helps!!!
Thank you

RoboHelp is unable to start RoboHelp Explorer

I recently installed RoboHelp 9 on my Windows 7 Ultimate 64-bit computer. I worked in it for a day, editing a previously existing robohelp file that was created in version 6. Yesterday when I tried to open RoboHelp, it wouldn't open. The RoboHelp splash page quickly flashes on and off but does not open. I went to the .doc file for the project and tried to open that, but Word gives me an error that "RoboHelp is unable to start RoboHelp Explorer". It does open the word doc, but no RoboHelp Explorer. I've rebooted my machine, no luck.
Any ideas? I had this same issue with Adobe Captivate when I tried to load an old version on this machine... the answer seemed to be that it wasn't compatible with 64-bit... I installed the trial version of Captivate and have been running that for two weeks with no issues so far. But my understanding was that RoboHelp 9 was fine with 64-bit...
Thanks!

Hello again
You should probably consider filing a bug report. That way it will be on Adobe's radar. And you never know, sometimes the development team shoots back a message advising what to do or asking for further information. Doesn't happen always, but once in a while it does.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Project Server 2010 - Unable to open project, no valid Project Detail Page could be found for the project error

I have a workflow being deployed for the first time on a farm. When I create a project with an EPT connected to the workflow it runs and can enter the required field in a PDP. Then I Submit the workflow to go to the next stage and I get the "Unable
to open project, no valid Project Detail Page could be found for the project" error. After that the project is stuck on the same error. All of the 18 stages have PDP and Schedules assigned to them.
Any ideas on why the workflow cannot see the PDPs? Is there a farm permissions that I am missing? Thanks!

Hi David,
It starts to be a bit technical for me, but here is what I found on the web (seems to be an authentication issue with Sharepoint 2010):
http://social.technet.microsoft.com/Forums/en-US/120ab535-63d2-4205-a51f-1987e9c0cf79/sharepoint-fba-the-content-type-texthtml-charsetutf8-of-the-response-message-does-not-match-the
http://social.msdn.microsoft.com/Forums/silverlight/en-US/5cc70ff6-50d9-4cd3-b092-12007f4e495b/response-message-contenttypebindingtype-mismatch
http://stackoverflow.com/questions/5263150/the-content-type-text-html-charset-utf-8-of-the-response-message-does-not-match
Hope it will help you going forward in resolving your issue.
Guillaume Rouyre - MBA, MCP, MCTS

Win7 /Office Updates April 2015 - userinit.exe - Application Error : The application was unable to start correctly (0xc0000018)

Hi all,
After updating our acceptence Windows 7 SP1 clients (april updates). We are unable to login the machine.
Error: userinit.exe - Application Error : The application was unable to start correctly (0xc0000018)
After rebooting the machine 2times I'm able to login. When I shutdown the machine at the next boot i'm getting the same error again and i'm not able to logon.
I have no idea where to start. One by one uninstalling updates isn't an option because after a reboot it seems ok.
Any idea's? Help is welcome.
The installed updates:
1. Update (Missing): Update for Microsoft OneDrive for Business (KB2956185) 32-Bit Edition (04e403da-693b-4b76-a7ff-7807aaa8e82b, 200) WUAHandler 15-4-2015 10:35:12 5068 (0x13CC)
2. Update (Missing): Update for Microsoft Access 2013 (KB2965276) 32-Bit Edition (1292d1c5-e57a-479c-827a-bd91d26995fc, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
3. Update (Missing): Update for Microsoft OneNote 2013 (KB2965264) 32-Bit Edition (161aacb2-973c-4042-8a08-2d7912f46e62, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
4. Update (Missing): Update for Microsoft Outlook 2013 (KB2965270) 32-Bit Edition (216a01f6-8209-42e2-aefc-95cadf8c95ee, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
5. Update (Missing): Update for Skype for Business 2015 (KB2889853) 32-Bit Edition (2510db79-26bb-447c-b2fb-687cb494b0d8, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
6. Update (Missing): Update for Microsoft Project 2013 (KB2965279) 32-Bit Edition (2c49d156-cea9-432f-82c4-3f6b48c8c0ca, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
7. Update (Missing): Update for Microsoft Office 2013 (KB2965262) 32-Bit Edition (40fe3b7e-3e2d-4c11-bf5e-3139196057e0, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
8. Update (Missing): Security Update for Microsoft Word 2013 (KB2965224) 32-Bit Edition (59d17ded-907b-4162-8121-f1ce0c47023c, 201) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
9. Update (Missing): Definition Update for Microsoft Office 2013 (KB2965273) 32-Bit Edition (5bd24951-9c92-42d7-a17a-6eaa4a918dca, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
10. Update (Missing): Update for Microsoft Office 2013 (KB2965218) 32-Bit Edition (5db38391-2220-412f-83ac-28366ac06dd6, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
11. Update (Missing): Update for Microsoft Office 2013 (KB2965267) 32-Bit Edition (6fb5843a-cb0d-4bcb-9be1-4feb3c740681, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
12. Update (Missing): Update for Microsoft Office 2013 (KB2965255) 32-Bit Edition (91fea44d-b1b2-43a3-a82f-b02e56d3d216, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
13. Update (Missing): Update for Microsoft Office 2013 (KB2965268) 32-Bit Edition (9dd67b4e-59e4-40b0-b5c8-7dcabd770d66, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
14. Update (Missing): Update for Microsoft Office 2013 (KB2825678) 32-Bit Edition (a5bf824c-7e5b-49bf-9d36-145c80221c74, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
15. Update (Missing): Update for Microsoft Outlook Social Connector 2013 (KB2965257) 32-Bit Edition (abab9d22-a65e-444e-8196-fcceba0aa7b3, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
16. Update (Missing): Update for Microsoft Lync 2013 (KB2889923) 32-Bit Edition (c35eb1f8-5ee7-4192-9ad0-1ae72315ac7e, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
17. Update (Missing): Update for Microsoft Excel 2013 (KB2965275) 32-Bit Edition (ca2c6772-706d-4a4a-a68d-78bbeaa3f56c, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
18. Update (Missing): Update for Microsoft Office 2013 (KB2880487) 32-Bit Edition (cf0b67db-b547-489f-a220-4592d68823b2, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
19. Update (Missing): Update for Microsoft PowerPoint 2013 (KB2965256) 32-Bit Edition (d1b0c046-1d5b-4f6b-afe7-68a863fb7fe2, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
1. Update (Missing): Security Update for Windows 7 for x64-based Systems (KB3046306) (05411874-4d1f-44c4-8aad-dc84726878c9, 202) WUAHandler 15-4-2015 10:15:25 2932 (0x0B74)
2. Update (Missing): Security Update for Windows 7 for x64-based Systems (KB3046482) (11ece05f-164c-4a7c-9f02-9379c61e2e23, 203) WUAHandler 15-4-2015 10:15:26 2932 (0x0B74)
3. Update (Missing): Cumulative Security Update for Internet Explorer 10 for Windows 7 for x64-based Systems (KB3038314) (2be48962-5314-484e-a7e8-16f4679dfea3, 202) WUAHandler 15-4-2015 10:15:26 2932 (0x0B74)
4. Update (Missing): Update for Windows 7 for x64-based Systems (KB2990214) (45f40ba9-5687-4415-85c7-68198f223f0f, 202) WUAHandler 15-4-2015 10:15:26 2932 (0x0B74)
5. Update (Missing): Security Update for Microsoft .NET Framework 4.5, 4.5.1 and 4.5.2 on Windows 7, Vista, Server 2008, Server 2008 R2 x64 (KB3037581) (6c8c0ac4-f40b-4e4b-aa83-1694fe0dbec2, 201) WUAHandler 15-4-2015 10:15:26 2932 (0x0B74)
6. Update (Missing): Security Update for Windows 7 for x64-based Systems (KB3045685) (ab4e2d11-37f2-4f64-b7e1-11e5ca25ce2a, 201) WUAHandler 15-4-2015 10:15:26 2932 (0x0B74)
7. Update (Missing): Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB3037574) (b9d30936-8e3b-4728-988e-78cc39aec684, 202) WUAHandler 15-4-2015 10:15:26 2932 (0x0B74)
8. Update (Missing): Security Update for Windows 7 for x64-based Systems (KB3042553) (cf426941-6ec7-41d2-99ce-710d4ddd543b, 203) WUAHandler 15-4-2015 10:15:26 2932 (0x0B74)
9. Update (Missing): Security Update for Windows 7 for x64-based Systems (KB3045999) (e1107158-3e97-4c23-801c-ede494f9df4a, 202) WUAHandler 15-4-2015 10:15:26 2932 (0x0B74)
10. Update (Missing): Security Update for Windows 7 for x64-based Systems (KB3046269) (ed46d995-c9fb-41e2-94df-146d97d47d07, 201) WUAHandler 15-4-2015 10:15:26 2932 (0x0B74)
1. Update (Missing): Windows Malicious Software Removal Tool x64 - April 2015 (KB890830) (1de9e76a-4e0b-4ee3-b2b2-cccd08f4ff59, 200) WUAHandler 15-4-2015 10:12:18 2768 (0x0AD0)

Hi Tim,
Uninstalling
KB3045999 works as a workaround like Wastashi said. We too have this problem.
@Karen Hu: Startup repair didn't find anything here and this is probably because the system boots properly but only after a user logs in the "Error: userinit.exe - Application Error : The application was unable to start correctly (0xc0000018)"
appears. Safe mode works however and after I disabled all the startup items and rebooted I could successfully logon once, but this could be coincidence because sometimes after a reboot you can login as pointed out by Tim NL. However a few seconds
after I successfully logged in and saw the desktop, the pc rebooted spontaneously. Any idea what this could be causing? Virus scanner maybe?

Unable to start presentation services , in OBIEE 11g

Hi ,
Unable to start presentation services , in OBIEE 11g :
[2013-01-18T13:38:49.000+05:30] [OBIPS] [INCIDENT_ERROR:1] [] [saw.webextensionbase.init] [ecid: ] [tid: ] Invalid item /system/mktgcache/01HW447397/sawguidstate.[[
File:catalogimpl.cpp
Line:660
Location:
     saw.webextensionbase.init
     saw.sawserver
     saw.sawserver.initializesawserver
     saw.sawserver

Follow the steps below:
1.Shutdown all OBIEE services.
2.Replace the files sawguidstate and sawguidstate.atrin the location:
<Instance_Home>\instances\<instance_name>\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1\catalog\<project>\root\system\mktgcache\<name>
with the same files from a backup or from another working instance.
3.Restart all OBIEE services.

Unable to start scheduler in OIM 9.1.0.2 bp05

Hey,
I have updated our dev instance weblogic server 10.3.1 to 10.3.2 & OIM from 9.1.0.1 to 9.1.0.2 bp05. Once after we apply bundle patch 05 we are unable to start scheduler. Getting below FATAL error while start WLS 10.3.2 where OIM deployed.
*FATAL,11 Jun 2010 12:04:16,350,[SCHEDULER.WEBSTARTUP],Unable to start scheduler : org/quartz/impl/StdSchedulerFactory*
Also we couldn't login in to http://hostname:7001/xlScheduler due to above issue. Getting below error while attempt to login.
*<Jun 11, 2010 12:06:08 PM EDT> <Error> <HTTP> <BEA-101017> <[ServletContext@27144903[app:Xellerate module:/xlScheduler path:/xlScheduler spec-version:null]] Root cause of ServletException.*
java.lang.NoClassDefFoundError: Thor/API/Security/LoginHandler/LoginHandlerFactory
at com.thortech.xl.scheduler.deployment.webapp.SchedulerInitServlet.verifyUser(Unknown Source)
at com.thortech.xl.scheduler.deployment.webapp.SchedulerInitServlet.service(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
Truncated. see log file for complete stacktrace
Please help us to fix this issue. We are unable to schedule/run GTC in OIM which is affecting our project deadline seriously!
Thanks in advance
klogu

java.lang.NoClassDefFoundError : looks like you are missing one of the class from the class path.
Thor/API/Security/LoginHandler/LoginHandlerFactory is in xlAPI.jar, add it in the classpath of the OIM server and see if you are able to start your scheduler.
Hope this helps,
Sagar

Unable to start project

Similar Messages

Maybe you are looking for