Unable to start SOA server through Node Manager

Hi All,
I am trying to install AIA 11.1.1.6.0 on the top of SOA Suite 11.1.1.6.0.
I was able to install successfully the weblogic server, rcu, soa and osb servers. Now, before installing the AIA, the document i am following it says, make sure to start the soa server through the node manager.
Now i start the admin server, then the node manager, to make sure i have checked that the node manager is up, i logged in to the weblogic console, went to Machines, and i can see that it is up and reachable.
Now using the WLST commands, first i connected to the node manager using command nmConnect(), then i am trying to start the soa server through node manager using the command start('soa_server1') command.
I am getting an error while trying to start soa server with nmStart() command, below is the error message...
"Error starting server soa_server1: weblogic.nodemanager.NMException: Exception while starting server 'soa_server1'"
I executed the dumpStack() command, and i am getting the output as "No stack trace available"
If i am able to start the soa server through the node manager, i can go ahead and install the AIA pack but this is not letting me go forward.
I also tried to start the soa server through the weblogic console., go to servers tab, select the soa_server1 and start, the soa server state is going to "FAILED_NOT_RESTARTABLE".
I followed some of the blogs like...
http://neeraj-soa-tips.blogspot.com/2010/06/starting-admin-and-managed-servers.html
http://www.javamonamour.org/2011/09/nmconnect-nmstart-nmkill.html
Experts, please give your advice.
Many Thanks,
N

Hi Narsing,
I'm assuming that you've followed the required Pre-config steps. If it is not working, I'd suggest to start the Admin and SOA server without node manager first. Then start your node manager and see if it is reachable from the WLS console. Then shut down your SOA server from command prompt and restart your SOA server from WLS console.
Verify the Listen Address of your Node Manager and start your node manager from command prompt by explicitly specifying the same address and port.
As WLS console internally uses node manager only to start your server, you would not need to use WLST scripts to do the same and only SOA server needs to be started using node manager.
Regards,
Neeraj Sehgal
Hi Neeraj,
I made sure that in the weblogic console, in the machines tab, local machine-->configuration--->Node Manager, I have given the correct Listen Address (Narsing-PC) and the listen port 5556.
I have made sure the property StartScriptEnabled= true.
I have started the admin server through startWebLogic.cmd command, now i start the node manager by going to the C:\Oracle\Middleware\wlserver_10.3\server\bin and running the command startNodeManager.cmd, then i go to the weblogic console--->servers--->control--->soa_server1--->start , it is going to      FAILED_NOT_RESTARTABLE status.
If i see the log messages in the nodemanager.log, this is the below message...
<Jun 28, 2012 11:25:09 PM> <INFO> <soa_domain> <soa_server1> <Server output log file is 'C:\Oracle\Middleware\user_projects\domains\soa_domain\servers\soa_server1\logs\soa_server1.out'>
<Jun 28, 2012 11:25:11 PM> <INFO> <soa_domain> <soa_server1> <Server failed during startup so will not be restarted>
<Jun 28, 2012 11:25:11 PM> <WARNING> <Exception while starting server 'soa_server1'>
java.io.IOException: Server failed to start up. See server output log for more details.
     at weblogic.nodemanager.server.AbstractServerManager.start(AbstractServerManager.java:196)
     at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:23)
     at weblogic.nodemanager.server.Handler.handleStart(Handler.java:609)
     at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:121)
     at weblogic.nodemanager.server.Handler.run(Handler.java:71)
     at java.lang.Thread.run(Thread.java:662)
The log message in the soa_server1.out file is as below...
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=8453,server=y,suspend=n -Djava.compiler=NONE -Xms512m -Xmx1024m -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=soa_server1 -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Dweblogic.system.BootIdentityFile=C:\Oracle\Middleware\user_projects\domains\soa_domain\servers\soa_server1\data\nodemanager\boot.properties -Dweblogic.nodemanager.ServiceEnabled=true -Dweblogic.security.SSL.ignoreHostnameVerification=false -Dweblogic.ReverseDNSAllowed=false -Xverify:none -da:org.apache.xmlbeans... -ea -da:com.bea... -da:javelin... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:com.bea.sbconsole... -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dcommon.components.home=C:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=C:\Oracle\MIDDLE~1\USER_P~1\domains\SOA_DO~1 -Djrockit.optfile=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=C:\Oracle\MIDDLE~1\USER_P~1\domains\SOA_DO~1\config\FMWCON~1\servers\soa_server1 -Doracle.domain.config.dir=C:\Oracle\MIDDLE~1\USER_P~1\domains\SOA_DO~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=C:\Oracle\MIDDLE~1\USER_P~1\domains\SOA_DO~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Oracle\MIDDLE~1\USER_P~1\domains\SOA_DO~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=C:\Oracle\MIDDLE~1\USER_P~1\domains\SOA_DO~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=C:\Oracle\MIDDLE~1\USER_P~1\domains\SOA_DO~1\servers\soa_server1\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol"|"oracle.fabric.common.classloaderurl.handler"|"oracle.fabric.common.uddiurl.handler"|"oracle.bpm.io.fs.protocol -Dweblogic.jdbc.remoteEnabled=false -Doracle.security.jps.policy.migration.validate.principal=false -da:org.apache.xmlbeans... -Dbpm.enabled=true -Dsoa.archives.dir=C:\Oracle\Middleware\Oracle_SOA1\soa -Dsoa.oracle.home=C:\Oracle\Middleware\Oracle_SOA1 -Dsoa.instance.home=C:\Oracle\MIDDLE~1\USER_P~1\domains\SOA_DO~1 -Dtangosol.coherence.clusteraddress=227.7.7.9 -Dtangosol.coherence.clusterport=9778 -Dtangosol.coherence.log=jdk -Djavax.xml.soap.MessageFactory=oracle.j2ee.ws.saaj.soap.MessageFactoryImpl -Dweblogic.transaction.blocking.commit=true -Dweblogic.transaction.blocking.rollback=true -Djavax.net.ssl.trustStore=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrust.jks -Dem.oracle.home=C:\Oracle\Middleware\oracle_common -Djava.awt.headless=true -Dbam.oracle.home=C:\Oracle\Middleware\Oracle_SOA1 -Dums.oracle.home=C:\Oracle\Middleware\Oracle_SOA1 -Dweblogic.management.discover=false -Dweblogic.management.server=http://localhost:7001 -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1036\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_oepe180\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_ocp371\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_adfr1111\profiles\default\sysext_manifest_classpath weblogic.Server
FATAL ERROR in native method: JDWP No transports initialized, jvmtiError=AGENT_ERROR_TRANSPORT_INIT(197)
ERROR: transport error 202: bind failed: Address already in use
ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../../../src/share/back/debugInit.c:690]
<Jun 28, 2012 11:25:11 PM> <FINEST> <NodeManager> <Waiting for the process to die: 4808>
<Jun 28, 2012 11:25:11 PM> <INFO> <NodeManager> <Server failed during startup so will not be restarted>
<Jun 28, 2012 11:25:11 PM> <FINEST> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>
Someone please help, if i am able to start the soa manged server, i can go ahead and install the AIA Foundation pack...
Many Thanks.

Similar Messages

Adding patch jar file while starting Managed Server through Node Manager

Hi,
I am using Weblogic Express 10.0 on Linux env, Jrockit JVM.
I have a patch jar file from BEA, I added it to Weblogic start script, when I start the Managed server by using startManagedWeblogic.sh script, I can see that patch jar file is added to classpath when I grep for Java process.(ps -ef | grep -i java).
But when I start the Managed server through NodeManager and grep for java process, I dont see the patch jar file added to classpath of Managed server process which is started.
Can someone let me know if I have to add the patch jar file somewhere else along with Weblogic start script if starting Managed server through Node Manager?
Weblogic Consultant

Thanks for your response.
I found another way to do this.
Edit nodemanager.properties file and set StartScriptEnabled=true (By default it is false), and then restart the Node Manager process.
Enabling this setting to true will enable the NodeManager process to use startManagedWeblogic.sh script while starting the managed server, all the added jar files, memory settings will be taken from start script of Weblogic
Weblogic Consultant

Reg: Configuration of Managed Server through Node Manager

Hello:
I have a question Regarding the System properties (-Dname= value
pairs) that are passed when starting the Managed Servers.
In the managed Server script I am passing below two name value pairs
when starting the managed server
-Dorg.omg.CORBA.ORBClass=com.inprise.vbroker.orb.ORB
-Dorg.omg.CORBA.ORBSingletonClass=com.inprise.vbroker.orb.ORB
I am able to see these variables as <java System variabales > in the
weblogic.log corresponding to managed server.
Next is starting managed server through the node manager. Now in this
case the Node managed recives the configuration
of the managed server from the Administration server and he then
starts the managed server.
Now my question is though I have changed the startup scripts of
the Managed server to include the above two name value pairs. But I am
not able to see them in the congfiguration file in NodeManagerLogs
corresponding to the Managed Server. Also even in weblogic.log
corresponding to the Managed Server.
Can any one clarify this. Also How to define the new system variables
for the Managed Server so that I can see them in the configuration
file that Adminitration Server sends to the Node Manager.
Thanks,
Vijay

Thanks Anand.
"Anand Byrappagari" <[email protected]> wrote:
Vijay,
When you say managed server scripts do you mean startWeblogic.cmd ?
If you are using the node manger to start the managed servers then these
scripts are not executed. You should set the properties in the console.
Goto YourDomain>Servers>YourManagedServer in the console.
Select "Configuration" tab.
Then select "Remote Start" tab.
In the "Remote Start" tab enter the properties in the "Arguments" field.
-- Anand
"Vijay Kumar" <[email protected]> wrote in message
news:[email protected]..
Hello:
I have a question Regarding the System properties (-Dname= value
pairs) that are passed when starting the Managed Servers.
In the managed Server script I am passing below two name value pairs
when starting the managed server
-Dorg.omg.CORBA.ORBClass=com.inprise.vbroker.orb.ORB
-Dorg.omg.CORBA.ORBSingletonClass=com.inprise.vbroker.orb.ORB
I am able to see these variables as <java System variabales > in the
weblogic.log corresponding to managed server.
Next is starting managed server through the node manager. Now in this
case the Node managed recives the configuration
of the managed server from the Administration server and he then
starts the managed server.
Now my question is though I have changed the startup scripts of
the Managed server to include the above two name value pairs. But Iam
not able to see them in the congfiguration file in NodeManagerLogs
corresponding to the Managed Server. Also even in weblogic.log
corresponding to the Managed Server.
Can any one clarify this. Also How to define the new system variables
for the Managed Server so that I can see them in the configuration
file that Adminitration Server sends to the Node Manager.
Thanks,
Vijay

Problem starting Admin Server using Node Manager

I have configured the Node Manager to run as a windows service. I want it to start the Admin Server when it is started. This is not working. The Node Manager starts without problem but does not appear to even attempt to start the Admin Server. No error message is written to the nodemanager.log. I have configured the following properties as described in the documentation:
StartScriptEnabled=true
StartScriptName=startWebLogic.cmd
Starting the Admin Server using wlst works. As does starting and stopping a Managed server using the Admin console. This leads me to conclude that the Node Manager configuration is ok.
WLS version is 9.2.
All suggestions as to what could be the issue here would be greatly appreciated.
Cheers!

Ok, I just wasted a whole day before I found the tricks.
First, you don't need to do that StartScriptEnabled stuff, unless you have important things to add there.
Ok, and now what I found:
- You must make sure you have installed the NodeManager as a service
- Next, make sure the admin server is assigned to the right machine. Since you can do the WLST trick, that should be fine. If not, tough luck, because the docs say you cannot re-assign an admin server.
- In nodemanager.properties (...\weblogic92\common\nodemanager) make sure CrashRecoveryEnabled is set to true
- In nodemanager.domains (same dir) make sure your domain is mentioned with its path
- For each of the servers to be auto-started, make sure that a startup.properties (in <your-domain-dir> \servers\<server-name> \data\nodemanager) contains Arguments=-Xnohup (for JRockit, for Sun JDK its -Xrs)
Make sure they are started through the nodemanager, et voila, they'll be restarted after a reboot.
Why this works? At reboot, the OS ask all processes to die, nicely. Those that don't, get killed forcibly. Without the -Xnohup/rs, the WebLogic servers respond to the nice request, and the nodemanager immediately tries to restart them. Unfortunately, the OS refuses to do that, and the server process is marked as failed, and won't be restarted after reboot. With the option given, the servers ignore mr nice guy, and get killed after the nodemanager has disappeared.
What can go wrong? A lot. I was playing with the nodemanager username and password, and that took some time to clean up. I probably have to redo the entire setup just to make sure I have a repeatable experience now...
Cheers,
Bert

Unable to start SOA Server and need to recreate the domain

Hi,
I have been facing this issue and the only work aroud I could do was recreating the domain/purging and recreating the mds schema. When restarting the SOA server getting the following error
oracle.mds.exception.MDSException: MDS-00054: The file to be loaded oramds:/deployed-composites/AMSRulesService_rev1.0.3/SCA-INF/classes/meta-inf/adf-config.xml does not exist.
     at oracle.fabric.common.metadata.MetadataManagerImpl.getInputStreamFromAbsoluteURL(MetadataManagerImpl.java:273)
     at oracle.integration.platform.common.MDSMetadataManagerImpl.getInputStreamFromAbsoluteURL(MDSMetadataManagerImpl.java:538)
     at oracle.integration.platform.common.MDSMetadataManagerImpl.transferFile(MDSMetadataManagerImpl.java:795)
     at oracle.integration.platform.common.MDSMetadataManagerImpl.copyTree(MDSMetadataManagerImpl.java:776)
     at oracle.fabric.composite.model.CompositeModel.getClassLoaderFiles(CompositeModel.java:362)
     at oracle.fabric.composite.model.CompositeModel.getCompositeClassloader(CompositeModel.java:203)
     at oracle.integration.platform.kernel.WLSFabricKernelInitializer.deployComposite(WLSFabricKernelInitializer.java:493)
     at oracle.integration.platform.kernel.WLSFabricKernelInitializer.prepareCompositeDeployments(WLSFabricKernelInitializer.java:233)
     at oracle.integration.platform.kernel.WLSFabricKernelInitializer.init(WLSFabricKernelInitializer.java:123)
     at javax.servlet.GenericServlet.init(GenericServlet.java:241)
     at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
     at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
     at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48)
     at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:531)
     at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1915)
     at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1889)
     at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1807)
     at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3045)
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1397)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:460)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
     at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
     at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:1267)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
     at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409)
     at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:54)
     at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
     at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
     at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
     at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:196)
     at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
     at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.io.IOException: oracle.mds.exception.MDSException: MDS-00054: The file to be loaded oramds:/deployed-composites/AMSRulesService_rev1.0.3/SCA-INF/classes/meta-inf/adf-config.xml does not exist.
     at oracle.mds.internal.net.AbstractOraMDSURLConnection.getPDocStream(AbstractOraMDSURLConnection.java:388)
     at oracle.mds.internal.net.AbstractOraMDSURLConnection.getInputStream(AbstractOraMDSURLConnection.java:176)
     at oracle.mds.internal.net.OraMDSURLConnection.getInputStream(OraMDSURLConnection.java:67)
     at java.net.URL.openStream(URL.java:1010)
     at oracle.fabric.common.metadata.MetadataManagerImpl.getInputStreamFromAbsoluteURL(MetadataManagerImpl.java:269)
     ... 50 more
Caused by: oracle.mds.exception.MDSException: MDS-00054: The file to be loaded oramds:/deployed-composites/AMSRulesService_rev1.0.3/SCA-INF/classes/meta-inf/adf-config.xml does not exist.
     at oracle.mds.internal.net.AbstractOraMDSURLConnection.getPDocStream(AbstractOraMDSURLConnection.java:339)
     ... 54 more
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1399)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:460)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
     at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
     at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:1267)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
     at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409)
     at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:54)
     at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
     at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
     at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
     at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:196)
     at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
     at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: oracle.mds.exception.MDSException: MDS-00054: The file to be loaded oramds:/deployed-composites/AMSRulesService_rev1.0.3/SCA-INF/classes/meta-inf/adf-config.xml does not exist.
     at oracle.mds.internal.net.AbstractOraMDSURLConnection.getPDocStream(AbstractOraMDSURLConnection.java:339)
     at oracle.mds.internal.net.AbstractOraMDSURLConnection.getInputStream(AbstractOraMDSURLConnection.java:176)
     at oracle.mds.internal.net.OraMDSURLConnection.getInputStream(OraMDSURLConnection.java:67)
     at java.net.URL.openStream(URL.java:1010)
     at oracle.fabric.common.metadata.MetadataManagerImpl.getInputStreamFromAbsoluteURL(MetadataManagerImpl.java:269)
     at oracle.integration.platform.common.MDSMetadataManagerImpl.getInputStreamFromAbsoluteURL(MDSMetadataManagerImpl.java:538)
     at oracle.integration.platform.common.MDSMetadataManagerImpl.transferFile(MDSMetadataManagerImpl.java:795)
     at oracle.integration.platform.common.MDSMetadataManagerImpl.copyTree(MDSMetadataManagerImpl.java:776)
     at oracle.fabric.composite.model.CompositeModel.getClassLoaderFiles(CompositeModel.java:362)
     at oracle.fabric.composite.model.CompositeModel.getCompositeClassloader(CompositeModel.java:203)
     at oracle.integration.platform.kernel.WLSFabricKernelInitializer.deployComposite(WLSFabricKernelInitializer.java:493)
     at oracle.integration.platform.kernel.WLSFabricKernelInitializer.prepareCompositeDeployments(WLSFabricKernelInitializer.java:233)
     at oracle.integration.platform.kernel.WLSFabricKernelInitializer.init(WLSFabricKernelInitializer.java:123)
     at javax.servlet.GenericServlet.init(GenericServlet.java:241)
     at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
     at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
     at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48)
     at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:531)
     at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1915)
     at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1889)
     at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1807)
     at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3045)
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1397)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:460)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
     at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
     at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:1267)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
     at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409)
     at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:54)
     at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
     at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
     at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
     at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:196)
     at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
     at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
This is nothiung to do with me playing with the mds but happens many times when I override the existing composites.
If anyone had faced this issue and have a better solution, plase let me know.
One solution I was thinking was to remove that particualr composite from being loaded at startup of soa server but did not find any way how I could achive this.
Thanks,
Ajay

I'm guessing but I think this happens when the server dies mid way through a composite deployment. Then when the soa-infra application tries to start it can’t find expected files for the half deployed composite and falls over.
In our case the problem was with composite InvoiceTransformer_rev1.0. We are able to get the soa infra back up by:
Stopping the soa server
Replacing the adf-config.xml file in:
<MW_HOME>/user_projects/domains/<DOMAIN_NAME>/deployed-composites/InvoiceTransformer_rev1.0/sca_InvoiceTransformer_rev1.0/soa_<SOME GUID>/SCA-INF/classes/META-INF
Starting the soa server
Starting the soa-infra application in the console.
The soa-infra application started but most of the composites were down and needed to be redeployed.

How to start coherence server using node manager of remote web-logic server

We want to manage our coherence servers using web-logic. Our requirement is as such we want to keep single web-logic Admin Server and add all other node-manager to the same web-logic Admin Server.
Now when we create machine on node 1 (on which Admin Server is running) and add node manager of other server it is not responding and shows status as inactive.
Status: Inactive
Problem description: weblogic.nodemanager.NMException Exception encountered while communicating with this node manager
Version: (not available)
Looking at the log files it gives below info
<Sep 10, 2011 6:31:55 AM> <WARNING> <Configuration error while reading domain directory>
weblogic.nodemanager.common.ConfigException: The domain 'BlazeVMA' at 'null' was not registered in the nodemanager.domains file and dynamic domain registration is not supported. Please register the domain in the nodemanager.domains file.
at weblogic.nodemanager.server.NMServer.getDomainManager(NMServer.java:254)
<Sep 10, 2011 7:53:58 AM> <WARNING> <I/O error while reading domain directory>
java.io.FileNotFoundException: Domain directory '/data/oracle/Middleware/user_projects/domains/BlazeVMA' not found
Even after I have added the domain name in above directory. It returns with the same error.
Please let me know if anyone has faced the same issue while running coherence server on remote system using weblogic admin console on one machine and node manager on other machine.

Thank You Rene.
This issue is resolved, but now I am facing issue while starting the coherence server on the remote node using node manager.
In the weblogic > coherence_server logs I am getting
Oracle Coherence Version 3.6.0.4 Build 19111
Grid Edition: Development mode
Copyright (c) 2000, 2010, Oracle and/or its affiliates. All rights reserved.
2011-09-11 07:14:40.231/1.453 Oracle Coherence GE 3.6.0.4 <Error> (thread=Main Thread, member=n/a): Error while starting cluster: java.lang.IllegalArgumentException: The specified address "/hostname" is not a local address.
at com.tangosol.net.InetAddressHelper.getLocalMTU(InetAddressHelper.java:139)
Please let me know if anyone has faced the same issue and know resolution.

Starting manged server without node manager

Hi All
I know that we can start managed servers from admin console but for that we have to have node manager on that machine running.
But I want to know,if I dont want to use node manager,can i start some how managed servers from admin console.That is if my node manager is not running,can i start the managed servers using admin console.
Please let me know if it is possible or not.
Thanks in advance.
DJ

Without the node manager running, you cannot start the managed servers from the admin console.
There are other options you can use to start the managed servers though, which i guess you might be aware of.
Just in case you don't, it's nicely documented by Atul @ http://onlineappsdba.com/index.php/2008/08/03/oracle-weblogic-server-startupshutdown/
Hope this helps.
Thanks,
Patrick

Unable to start soa server with anonymous attempt to JNDI resource error

I created a new outbound connection in my JMS Adapter deployment then I also created a new Foreign Server in my JMS Module that is deployed on my SOA server.
Now when i try to restart my SOA server it is failing with the below exception.
<Jul 1, 2011 10:43:23 AM EDT> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: java.lang.SecurityException: Anonymous attempt to get to a JNDI resource
java.lang.SecurityException: Anonymous attempt to get to a JNDI resource
at weblogic.management.remote.common.ClientProviderBase.makeConnection(ClientProviderBase.java:194)
at weblogic.management.remote.common.ClientProviderBase.newJMXConnector(ClientProviderBase.java:84)
at javax.management.remote.JMXConnectorFactory.newJMXConnector(JMXConnectorFactory.java:338)
at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:247)
at weblogic.management.mbeanservers.runtime.internal.RegisterWithDomainRuntimeService.getDomainMBeanServerConnection(RegisterWithDomainRuntimeService.java:222)
I have deleted the outbound connection as well as the new Foreign server but still when restarting I am getting the same error.
How can I fix this?
This is blocking me from doing my development work.
Thanks,
Rajesh

Can you check the config.xml of the domain and see if you are still having any references to the JNDI name you had used? If yes try removing the references manually and save the file and then restart the server. PLEASE TAKE A BACKUP OF THE config file before doing so.
Thanks,
Patrick

Problems while starting the Managed Server through Node Manager..

When I was trying to start a Managed Server using the Nodemanager , I am getting the following error :
NodeManager not configured to receive commands from host : emis-develop
I have the "nodemanager.hosts" file under the directory "c:\bea\wlserver6.1\config" and even while invoking the script for the startnodemanager , I am indicating this in the script ! Any ideas for this problem ??

The system is vulnerable to security attacks, since it trusts certificates signed by the demo trusted CA.> You may configure custom Identity and Trust in weblogic. It is not recommended to use Demo Trsut and Demo Identity for environments higher to Dev. -
http://download.oracle.com/docs/cd/E14571_01/web.1111/e13707/identity_trust.htm#i1202182
Regards,
Anuj

Unable to Start MDM Server through MDM Console

Dear All,
We have issue to start MDM through MDM Console , MDM instance is up and running SAP console.
I have already mounted MDM Server but its show MDM is not started , we are try to start manualy while right clicking.
It shows below error .
error starting 'sap1024.sap.xxx.com (MDM Server)'
Call to SAPWebServiceStartInstance failed with error .A connection attempt failed because the connected party did not properly respond after a period of time , or established connecton failed bacause connected host has failed to respond.
Kindly suggest to resolve the above issue in MDM.
thanks

Closing the thread , same thread post in MDM .

Server state failed when starting through node manager

Hi,
I'm getting the below error while starting the managed server through node manager
<Sep 14, 2010 3:49:34 PM> <Warning> <Exception while starting server 'ms01': java.io.IOException: Server failed to start up. See server
output log for more details.>
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:303)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:542)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:119)
at weblogic.nodemanager.server.Handler.run(Handler.java:66)
at java.lang.Thread.run(Thread.java:619)
I have checked the server logs and it shows the below error code
./admin-stdout.log:<Sep 15, 2010 4:15:56 PM PDT> <Error> <NodeManager> <BEA-300048> <Unable to start the server ms01 : Exception while starting server 'ms01': java.io.IOException: Server failed to start up. See server output log for more details.>
I have also checked WebLogic documentation for BEA-300048. It says "Cause: The most likely cause is a configuration error in the Shell/SSH/RSH NodeManager configuration".
but I'm using Java based node manager
All this is coming up when I enable StartScriptEnabled to true in nodemanager.properties.
What could be reason for failure?

Hi.
If you are not using the latest service pack (sp2) please do so. If you are and are still seeing this
problem please open a case with support.
Thanks
Michael
Tim Dawson wrote:
I get this message whenever I try to use the console to start a managed server
on a remote system.
<Jan 12, 2002 8:18:26 AM PST> <Emergency> <WebLogicServer> <Unable to create a
server socket for: weblogic2.dev.wamnet.com/172.17.27.84, port: 7001. java.net.BindException:
Cannot assign requested address: JVM_Bind Perhaps the address weblogic2.dev.wamnet.com/172.17.27.84
is incorrect or another process is using port 7001.>
I've checked and checked and the only thing running on that box is the node manager!
The console will start a managed server on the local system (i.e. the system
that the admin server is running on) without any complaints.
Any ideas? Thanks,
Tim--
Michael Young
Developer Relations Engineer
BEA Support

Unable to start Manager server using Node Manager

Hi,
I have deployed Admin server in one of my unix machine(machine1) and i able to start my Admin server using node manager, and when i try to start my Managed server in another machine(machine2) using the node manager(that machine node manager) its throwing error;
Note: am able to start Managed server using Adminurl and able to connect to Managed server node manager successfully,
but not able to start Managed server using node manager
its giving exception as below;
error:- wls:/nm/webdomain> nmStart('ms1')
Starting server ms1 ...
Error Starting server ms1: weblogic.nodemanager.NMException: Exception while starting server 'ms1'
Managed server log: -
<Dec 13, 2011 3:40:17 PM> <INFO> <NodeManager> <Working directory is '/root/Oracle/Middleware/user_projects/domains/webdomain'>
[root@LinuxVM ~]# cat /root/Oracle/Middleware/user_projects/domains/webdomain/servers/ms1/logs/ms1.out00071
<Dec 13, 2011 3:40:17 PM> <INFO> <NodeManager> <Starting WebLogic server with command line: /root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/jre/bin/java -Dweblogic.Name=ms1 -Dbea.home=/root/Oracle/Middleware -Djava.security.policy=/root/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.policy -Djava.library.path="/root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/jre/lib/i386/jrockit:/root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/jre/lib/i386:/root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/jre/../lib/i386:/root/Oracle/Middleware/patch_wls1035/profiles/default/native:/root/Oracle/Middleware/patch_ocp360/profiles/default/native:/root/Oracle/Middleware/wlserver_10.3/server/native/linux/i686:/root/Oracle/Middleware/wlserver_10.3/server/native/linux/i686/oci920_8" -Djava.class.path=/root/Oracle/Middleware/patch_wls1035/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/root/Oracle/Middleware/patch_ocp360/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/lib/tools.jar:/root/Oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/root/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/root/Oracle/Middleware/modules/features/weblogic.server.modules_10.3.5.0.jar:/root/Oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/root/Oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/root/Oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar::/root/Oracle/Middleware -Dweblogic.system.BootIdentityFile=/root/Oracle/Middleware/user_projects/domains/webdomain/servers/ms1/data/nodemanager/boot.properties -Dweblogic.nodemanager.ServiceEnabled=true weblogic.Server >
<Dec 13, 2011 3:40:17 PM> <INFO> <NodeManager> <Working directory is '/root/Oracle/Middleware/user_projects/domains/webdomain'>
Nodemanager log:
<Dec 13, 2011 3:40:17 PM> <INFO> <webdomain> <ms1> <Rotated server output log to "/root/Oracle/Middleware/user_projects/domains/webdomain/servers/ms1/logs/ms1.out00070">
<Dec 13, 2011 3:40:17 PM> <INFO> <webdomain> <ms1> <Server error log also redirected to server log>
<Dec 13, 2011 3:40:17 PM> <INFO> <webdomain> <ms1> <Starting WebLogic server with command line: /root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/jre/bin/java -Dweblogic.Name=ms1 -Dbea.home=/root/Oracle/Middleware -Djava.security.policy=/root/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.policy -Djava.library.path="/root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/jre/lib/i386/jrockit:/root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/jre/lib/i386:/root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/jre/../lib/i386:/root/Oracle/Middleware/patch_wls1035/profiles/default/native:/root/Oracle/Middleware/patch_ocp360/profiles/default/native:/root/Oracle/Middleware/wlserver_10.3/server/native/linux/i686:/root/Oracle/Middleware/wlserver_10.3/server/native/linux/i686/oci920_8" -Djava.class.path=/root/Oracle/Middleware/patch_wls1035/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/root/Oracle/Middleware/patch_ocp360/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/lib/tools.jar:/root/Oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/root/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/root/Oracle/Middleware/modules/features/weblogic.server.modules_10.3.5.0.jar:/root/Oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/root/Oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/root/Oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar::/root/Oracle/Middleware -Dweblogic.system.BootIdentityFile=/root/Oracle/Middleware/user_projects/domains/webdomain/servers/ms1/data/nodemanager/boot.properties -Dweblogic.nodemanager.ServiceEnabled=true weblogic.Server >
<Dec 13, 2011 3:40:17 PM> <INFO> <webdomain> <ms1> <Working directory is '/root/Oracle/Middleware/user_projects/domains/webdomain'>
<Dec 13, 2011 3:40:17 PM> <INFO> <webdomain> <ms1> <Rotated server output log to "/root/Oracle/Middleware/user_projects/domains/webdomain/servers/ms1/logs/ms1.out00071">
<Dec 13, 2011 3:40:17 PM> <INFO> <webdomain> <ms1> <Server error log also redirected to server log>
<Dec 13, 2011 3:40:17 PM> <INFO> <webdomain> <ms1> <Server output log file is '/root/Oracle/Middleware/user_projects/domains/webdomain/servers/ms1/logs/ms1.out'>
<Dec 13, 2011 3:40:26 PM> <INFO> <webdomain> <ms1> <Server failed during startup so will not be restarted>
<Dec 13, 2011 3:40:26 PM> <WARNING> <Exception while starting server 'ms1'>
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.AbstractServerManager.start(AbstractServerManager.java:200)
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:23)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:604)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:119)
at weblogic.nodemanager.server.Handler.run(Handler.java:71)
at java.lang.Thread.run(Thread.java:662)

You can start a managed server as follows:
print 'START NODE MANAGER';
startNodeManager(verbose='true', NodeManagerHome=nodemanagerhomelocation, ListenPort='5556', ListenAddress='localhost');
print 'CONNECT TO NODE MANAGER';
nmConnect(adminusername, adminpassword, 'localhost', '5556', domainname, domainlocation, 'ssl');
print 'START ADMIN SERVER';
nmStart('AdminServer');
nmServerStatus('AdminServer');
print 'CONNECT TO ADMIN SERVER';
connect(adminusername, adminpassword);
print 'START MANAGED SERVER';
start('VideotheekWebServer','Server');
nmServerStatus('VideotheekWebServer');
print 'START CLUSTER';
start('VideotheekCluster','Cluster');
nmServerStatus('VideotheekServer1');
nmServerStatus('VideotheekServer2');JVM properties are set using the admin console and edit the startup properties of your managed server (configuration, server start).
The properties file (startup.properties) is saved in the directory <domain-home>/servers/<server-name>/data/nodemanager.

Starting managed server using node manager

When i try to start the managed server using node manager i get the following error
ERROR: transport error 202: bind failed: Address already in use
ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../../../src/share/back/debugInit.c:690]
FATAL ERROR in native method: JDWP No transports initialized, jvmtiError=AGENT_ERROR_TRANSPORT_INIT(197)
Abort - core dumped
<Sep 21, 2010 3:58:07 PM> <FINEST> <NodeManager> <Waiting for the process to die: 22708>
<Sep 21, 2010 3:58:07 PM> <INFO> <NodeManager> <Server failed during startup so will not be restarted>
<Sep 21, 2010 3:58:07 PM> <FINEST> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>
The managed server lok file is deleted, port is not in use. With similar node manager settings the managed server on the redundant server starts fine

Hi,
I am getting same issue. Not able to start the soa_server1. Can you pleae tell me the soulution if you able to reslove the issue.
starting weblogic with Java version:
FATAL ERROR in native method: JDWP No transports initialized, jvmtiError=AGENT_ERROR_TRANSPORT_INIT(197)
[ERROR] aborted
JRockit aborted: Unknown error (50)
ERROR: transport error 202: bind failed: Address already in use
ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../../../src/share/back/debugInit.c:690]
Starting WLS with line:
D:\Oracle\MIDDLE~1\JROCKI~1.0-6\bin\java -jrockit -Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=8453,server=y,suspend=n -Djava.compiler=NONE -Xms512m -Xmx512m -Dweblogic.Name=soa_server1 -Djava.security.policy=D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Dweblogic.system.BootIdentityFile=D:\Oracle\Middleware\user_projects\domains\domain2\servers\soa_server1\data\nodemanager\boot.properties -Dweblogic.nodemanager.ServiceEnabled=true -Dweblogic.security.SSL.ignoreHostnameVerification=false -Dweblogic.ReverseDNSAllowed=false -Xverify:none -da:org.apache.xmlbeans... -ea -da:com.bea... -da:javelin... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:com.bea.sbconsole... -Dplatform.home=D:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=D:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=D:\Oracle\MIDDLE~1\WLSERV~1.3\server -Ddomain.home=D:\Oracle\MIDDLE~1\USER_P~1\domains\domain2 -Dcommon.components.home=D:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Djrockit.optfile=D:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.domain.config.dir=D:\Oracle\MIDDLE~1\USER_P~1\domains\domain2\config\FMWCON~1 -Doracle.server.config.dir=D:\Oracle\MIDDLE~1\USER_P~1\domains\domain2\config\FMWCON~1\servers\soa_server1 -Doracle.security.jps.config=D:\Oracle\MIDDLE~1\USER_P~1\domains\domain2\config\fmwconfig\jps-config.xml -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Digf.arisidbeans.carmlloc=D:\Oracle\MIDDLE~1\USER_P~1\domains\domain2\config\FMWCON~1\carml -Digf.arisidstack.home=D:\Oracle\MIDDLE~1\USER_P~1\domains\domain2\config\FMWCON~1\arisidprovider -Dweblogic.alternateTypesDirectory=D:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,D:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Dweblogic.jdbc.remoteEnabled=false -Doracle.security.jps.policy.migration.validate.principal=false -da:org.apache.xmlbeans... -Dsoa.archives.dir=D:\Oracle\Middleware\Oracle_SOA1\soa -Dsoa.oracle.home=D:\Oracle\Middleware\Oracle_SOA1 -Dsoa.instance.home=D:\Oracle\MIDDLE~1\USER_P~1\domains\domain2 -Dtangosol.coherence.clusteraddress=227.7.7.9 -Dtangosol.coherence.clusterport=9778 -Dtangosol.coherence.log=jdk -Djavax.xml.soap.MessageFactory=oracle.j2ee.ws.saaj.soap.MessageFactoryImpl -Djava.protocol.handler.pkgs="oracle.mds.net.protocol|oracle.fabric.common.classloaderurl.handler|oracle.fabric.common.uddiurl.handler|oracle.bpm.io.fs.protocol" -Dweblogic.transaction.blocking.commit=true -Dweblogic.transaction.blocking.rollback=true -Djavax.net.ssl.trustStore=D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrust.jks -Dem.oracle.home=D:\Oracle\Middleware\oracle_common -Djava.awt.headless=true -Dbam.oracle.home=D:\Oracle\Middleware\Oracle_SOA1 -Dums.oracle.home=D:\Oracle\Middleware\Oracle_SOA1 -Dweblogic.management.discover=false -Dweblogic.management.server=http://192.168.1.102:7001 -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=D:\Oracle\MIDDLE~1\patch_wls1033\profiles\default\sysext_manifest_classpath;D:\Oracle\MIDDLE~1\patch_oepe1033\profiles\default\sysext_manifest_classpath;D:\Oracle\MIDDLE~1\patch_ocp353\profiles\default\sysext_manifest_classpath weblogic.Server
[WARN ] Use of -Djrockit.optfile is deprecated and discouraged.
FATAL ERROR in native method: JDWP No transports initialized, jvmtiError=AGENT_ERROR_TRANSPORT_INIT(197)
[ERROR] aborted
JRockit aborted: Unknown error (50)
ERROR: transport error 202: bind failed: Address already in use
ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../../../src/share/back/debugInit.c:690]
<Oct 4, 2010 6:25:39 AM> <FINEST> <NodeManager> <Waiting for the process to die: 700>
<Oct 4, 2010 6:25:39 AM> <INFO> <NodeManager> <Server failed during startup so will not be restarted>
<Oct 4, 2010 6:25:39 AM> <FINEST> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>

Starting Manage Server using node manager

Hi,
Hi,
I am using Weblogic server 11g and I have deployed Admin server in one of my unix machine(machine1) and i able to start my Admin server using node manager, and when i try to start my Managed server in another machine(machine2) using the node manager(that machine node manager) its throwing error;
Note: am able to start Managed server using Adminurl and able to connect to Managed server node manager successfully,
but not able to start Managed server using node manager
its giving exception as below;
error:- wls:/nm/webdomain> nmStart('ms1')
Starting server ms1 ...
Error Starting server ms1: weblogic.nodemanager.NMException: Exception while starting server 'ms1'
plz help me out in this
Thanks in advance

An example to start managed servers on different machine is provided here: http://middlewaremagic.com/weblogic/?p=6637
"By default, WebLogic is installed and configured with the DemoIdentity.jks keystore. This certificate and key are created by utils.CertGen with the default options of containing only the host name in the common name field (cn), and not the fully-qualified DNS name. As a result, attempts to establish SSL connections may fail in some situations due to a host name verification exception. When using the demo certificates in a multi-server domain, managed server instances will fail to boot if they cannot establish an SSL connection with the Admin Server and the a BAD_CERTIFICATE error is generated. This error occurs because the host name verifier, which is enabled by default in all WebLogic domains and which is used during the SSL handshake, compares the value of the cn field in the certificate with the fully-qualified DNS name of the SSL server that accepts the SSL connection. If these names do not match, the SSL connection is dropped."

While Starting the Managed server using node manager

The system is vulnerable to security attacks, since it trusts certificates signed by the demo trusted CA.>
####<Nov 24, 2010 11:12:08 AM IST> <Notice> <Security> <HYDHTC99264D> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <147c637c707a0ee8:-6a0778d9:12c7c6421ea:-7fd5-000000000000000a> <1290577328874> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
####<Nov 24, 2010 11:12:08 AM IST> <Notice> <Security> <HYDHTC99264D> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <147c637c707a0ee8:-6a0778d9:12c7c6421ea:-7fd5-000000000000000a> <1290577328874> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
####<Nov 24, 2010 11:12:08 AM IST> <Notice> <Security> <HYDHTC99264D> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <147c637c707a0ee8:-6a0778d9:12c7c6421ea:-7fd5-000000000000000a> <1290577328890> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
####<Nov 24, 2010 11:12:08 AM IST> <Notice> <Security> <HYDHTC99264D> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <147c637c707a0ee8:-6a0778d9:12c7c6421ea:-7fd5-000000000000000a> <1290577328890> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
####<Nov 24, 2010 11:12:08 AM IST> <Notice> <Security> <HYDHTC99264D> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <147c637c707a0ee8:-6a0778d9:12c7c6421ea:-7fd5-000000000000000a> <1290577328890> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
####<Nov 24, 2010 11:12:08 AM IST> <Info> <WebLogicServer> <HYDHTC99264D> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <147c637c707a0ee8:-6a0778d9:12c7c6421ea:-7fd5-000000000000000a> <1290577328890> <BEA-000307> <Exportable key maximum lifespan set to 500 uses.>
####<Nov 24, 2010 11:12:22 AM IST> <Error> <NodeManager> <HYDHTC99264D> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <147c637c707a0ee8:-6a0778d9:12c7c6421ea:-7fd5-000000000000000d> <1290577342764> <BEA-300048> <Unable to start the server soa_server1 : Exception while starting server 'soa_server1'>
And the state of server is "FAILED_NOT_RESTARTABLE". Please help me in this
Regards
Veena

The system is vulnerable to security attacks, since it trusts certificates signed by the demo trusted CA.> You may configure custom Identity and Trust in weblogic. It is not recommended to use Demo Trsut and Demo Identity for environments higher to Dev. -
http://download.oracle.com/docs/cd/E14571_01/web.1111/e13707/identity_trust.htm#i1202182
Regards,
Anuj

Unable to start SOA server through Node Manager

Similar Messages

Maybe you are looking for