Unable to start Sun One Web Server 6.1 SP5 64bits on Solaris 10

Hello,
I installed the Sun One Web Server 6.1 SP5 64bits successfully on a Solaris 10 machine, but was unable to started up the web server application:
The error message is below,
# pwd
/app/SUNWwbsvr61sp5/https-admserv
# ls
ClassCache config restart SessionData stop
conf_bk logs rotate start webapps
# ./start
Sun ONE Web Server 6.1SP5 (64-Bit) B12/02/2005 04:37
failure: CORE3170: Configuration initialization failed: Error running init function load-modules: dlopen of /app/SUNWwbsvr61sp5/bin/https/lib/libj2eeplugin.so failed (ld.so.1: webservd: fatal: libjvm.so: open failed: No such file or directory)
I have searched the forum and found some what similar case but it was for SP4.
Please if anyone had experienced with this please advise how to resolve this issue.
I greatly appreciated,
Thank you
Edited by: n2sun on Jun 12, 2008 10:15 AM

just check the env file for the user who is starting or running that.
say if it is cshell, you can see the following variables in the .cshrc which will be under the user's home directory
setenv JAVAHOME WS_Root/jdk
setenv LD_LIBRARY_PATH WS_Root/lib: /libnow source that file
source .cshrcthen start the webserver.

Similar Messages

Error when starting Sun ONE Web Server 6.1SP4 after successful installation

I have installed Sun ONE Web Server 6.1SP4 on my Solaris computer and I receive the following error when I try to start the Admin server:
Sun ONE Web Server 6.1SP4 B01/20/2005 17:43
failure: CORE3170: Configuration initialization failed: Error running init funct
ion load-modules: dlopen of /opt/SUNWwbsvr/bin/https/lib/libj2eeplugin.so failed
(ld.so.1: webservd: fatal: relocation error: file /opt/SUNWwbsvr/bin/https/lib/
libares3.so: symbol __res_state: referenced symbol not found)
I am running Solaris 8 and I have installed Patch 108993-22 as stated in chapter 2 of the installation and migration guide. I have also installed patches 116602-01, 115827-01, 113648-03, 112396-02, 111317-05, 111310-01, 111111-04, 111023-03, 110386-03, 108987-15, and 108528-24 since they are necessary for patch 108993-22.
I have been stumped by this error. I have tried several different ways to install this software but I always get the same error. I believe that I have the latest version of the Sun One Web Server and I received no error notifications when I installed it! Any help would be apeciated!
Thanks!!!!!

I think this might occur if you don't have the patch for SunAlert 46042 installed. There's more information on this critical Solaris security vulnerability, which was reported back in 2002, at http://sunsolve.central.sun.com/search/document.do?assetkey=1-26-46042-1
Can you run the following command to check if you have patch 109326-09 installed and let us know the result?showrev -p | grep 109326If you don't have 109326-09 or higher installed, you should install it as soon as possible. You can follow the link from the SunAlert. Better yet, install the latest Solaris 8 recommended patch cluster from http://sunsolve.sun.com/pub-cgi/show.pl?target=patches/patch-access to make sure your system is fully patched and up to date.

While starting sun one web server error message

i have installed sun one web server 6.1,then i tried to start it from start up menu icon "start server administration server".the command prompt just displays and goes off.then i tried to start it from command prompt by giving path
"C:\Sun\WebServer6.1\https-pcname.com>startsvr".
error comes like this
C:\Sun\WebServer6.1\https-pcname.com>net start https-pcname.com Access is denied
can any one help me to solve this .

You most probably don't have admin priviledges required to start a service on this Windows machine.

Cant start Sun ONE Web Server 6.1SP10

Hi,
Running SP8 have no issues. But when I upgrade to SP10, my webserver wont start. Here are the details.
Sun ONE Web Server 6.1SP10 B09/04/2008 10:26
failure: CORE3170: Configuration initialization failed: Error running init function load-modules: dlopen of /opt/SUNWwbsvr/bin/https/lib/libj2eeplugin.so failed (A file or directory in the path name does not exist.)
Launching browser....
The file mention is even there.
# ls -lt /opt/SUNWwbsvr/bin/https/lib/libj2eeplugin.so
-rwxr-xr-x 1 root system 306414 Jun 14 2007 /opt/SUNWwbsvr/bin/https/lib/libj2eeplugin.so
Appreciate all your inputs. Thanks.

I just now installed Web Server 6.1 sp10 on AIX 5.2 machine works fine both with JDK 1.5 and 1.6 :
First I ran with JDK 1.5 (version shown below)
#java -version
java version "1.5.0"
Java(TM) 2 Runtime Environment, Standard Edition (build pap32dev-20080315 (SR7))
IBM J9 VM (build 2.3, J2RE 1.5.0 IBM J9 2.3
AIX ppc-32 j9vmap3223-20080315 (JIT enabled)
J9VM - 20080314_17962_bHdSMr
JIT - 20080130_0718ifx2_r8
GC - 200802_08)
JCL - 20080314and then changed in https-<instance>/config/server.xml, "javahome" to point to JDK 1.6 :
<JAVA javahome="/comps/jdk/16/aix/" serverclasspath=...>The exact version of JDK 6 I used is shown below :
#/comps/jdk/16/aix/jre/bin/java -version
java version "1.6.0"
Java(TM) SE Runtime Environment (build pap3260sr2-20080818_01(SR2))
IBM J9 VM (build 2.4, J2RE 1.6.0 IBM J9 2.4
AIX ppc-32 jvmap3260-20080816_22093 (JIT enabled, AOT enabled)
J9VM - 20080816_022093_bHdSMr
JIT - r9_20080721_1330ifx2
GC - 20080724_AA)
JCL - 20080808_02h4. oslevels
# oslevel -q;
Known Maintenance Levels
5.2.0.0
# oslevel -r
5200-02
# oslevel -r -q
Known Recommended Maintenance Levels
5200-10
5200-09
5200-08
5200-07
5200-06
5200-05
5200-04
5200-03
5200-02
5200-01
5200-00h4. How I built JDK
* Go to [http://www.ibm.com/developerworks/java/jdk/aix/service.html|http://www.ibm.com/developerworks/java/jdk/aix/service.html]
* Click on "Fix Info" link from Java 5.0 32 bit [http://www.ibm.com/developerworks/java/jdk/aix/j532/fixinfo.html|http://www.ibm.com/developerworks/java/jdk/aix/j532/fixinfo.html]
* Click on SR7 link [http://www-912.ibm.com/eserver/support/fixes/fixcentral/pseriespkgoptions/apar?fixes=IZ18002|http://www-912.ibm.com/eserver/support/fixes/fixcentral/pseriespkgoptions/apar?fixes=IZ18002] and download the JDK.
* You may have to create a soft links for sh (most probably only for Web Server 7 onwards)
# cd java-home
# ln -s bin sh
# cd jre
# ln -s bin sh* You may have to fix soft links in your JDK (especially links which point to /usr/java5/jre/bin) if your JDK is not installed on your local machine and you have copied that directory to another machine : for instance <JAVA-HOME>/bin/java should point to ../jre/bin/java rather than /usr/java5/jre/bin
* Due to [http://www.ibm.com/developerworks/forums/thread.jspa?threadID=179363&tstart=30|http://www.ibm.com/developerworks/forums/thread.jspa?threadID=179363&tstart=30], you may have to download security policies (jre/lib/security/US_export_policy.jar and jre/lib/security/local_policy.jar)
o Go to [http://www.ibm.com/developerworks/java/jdk/security/50/#sdkpol|http://www.ibm.com/developerworks/java/jdk/security/50/#sdkpol]
o Click on "IBM SDK Policy files" link i.e. [https://www14.software.ibm.com/webapp/iwm/web/preLogin.do?source=jcesdk|https://www14.software.ibm.com/webapp/iwm/web/preLogin.do?source=jcesdk]
o Downloaded "Unrestricted JCE Policy files for SDK 1.4" from that location (after login) [http://www6.software.ibm.com/.../unrestrict142.zip|http://www6.software.ibm.com/.../unrestrict142.zip]
o Unzip unrestrict142.zip file and replace the two jars (US_export_policy.jar and local_policy.jar) in appropriate places in JDK.
Same steps for JDK 6.

Unable to start sun java web server 6.1 SP4

Hi,
I have recently installed sun java web server 6.1 SP4 on solaris 10. The directory structure it created was completely different from the one mentioned in the documentation. I could not find the https-adminserv directory under the web server root directory. Instead the closest directory was bin/https/httpadmin/bin directory. On executing ./start it gave an error
ld.so.1: start: fatal: libssl3.so: open failed: No such file or directory
Killed
Any help is welcome. Thanks.
I had not installed the webserver in the standard location /opt/SUNWwbsrvr but in /BCP partition.

also, you can do something like
cd https-admserv
sh -x start
this will show as to what is the current LD_LIBRARY_PATH is pointing to and why ssl3.so is not getting loaded.
if you don't see
https-* under web server install root directory, then something wrong with your installation as well.
yes, if u stand alone version of web server, then you shouldn't run into any dependencies issue. u can also get 6.1 sp6 version from web - http://www.sun.com/webserver

Sun ONE Web Server 6.0 SP5 Java Stack Overflow?

We have a vanilla installation of Web Server 6.0 SP5, and consistently get the following error when using the admin server, choosing to manage a server, and choosing the Virtual Server Class tab.
Anyone seen this/solved it? Thanks.
failure ( 8650): Internal error: Unexpected error condition thrown (unknown exception,no description), stack: java.lang.StackOverflowError
at java.util.zip.ZipFile.getEntry(ZipFile.java:145)
at java.util.jar.JarFile.getEntry(JarFile.java:184)
at java.util.jar.JarFile.getJarEntry(JarFile.java:171)
at sun.misc.URLClassPath$JarLoader.getResource(URLClassPath.java:669)
...etc

Specifically, what are you looking for?
Does it work? Yes, I've been able to use 1.4.2 with 6.0. Just need to set the StackGuard as per the Release Notes for earlier (pre-1.4.2) J2SE's.

Installation issue: Sun one web server 6.1 SP5 with JDK1.6 on Windows XP

Hi,
I am trying to install sun one webserver 6.1 SP5 on my system which has windows XP operating system for the development work. the JDK version i am using is JDK1.6.
While installing sun one webserver at step where i can use custom java development kit i am providing path for the JDK1.6 in "JDK Path" text box as "C:\Java\jdk1.6.0_11".
while clicking next it throws me error "The version of selected JDK is too old". i don;t have any other version of JDK installed on my system.
Can any one tell me what can be the problem here?
Regards,
Nemish

Can you try Web Server 7.0 update 6?
BTW JDK version you are using has security vulnerabilities. Please upgrade to the latest JDK
as per [http://sunsolve.sun.com/search/document.do?assetkey=1-66-263489-1]
This issue is addressed in the following Java SE and Java SE for Business releases for Windows, Solaris, and Linux:
* JDK and JRE 6 Update 15 or later
* JDK and JRE 5.0 Update 20 or later

JDK 1.4.2 with Sun One Web Server 6.0 SP5?

In the release notes for 6.0 sp5 I see that latest supported JDK is 1.4.1_01. But I thought versions 1.4.0 and 1.4.1 are considered by Sun to have reached their end of life and now 1.4.2 is the supported one. So, is JDK 1.4.2 (or will it be) supported for 6.0 sp5?
Any experiences?

Specifically, what are you looking for?
Does it work? Yes, I've been able to use 1.4.2 with 6.0. Just need to set the StackGuard as per the Release Notes for earlier (pre-1.4.2) J2SE's.

Sun One Web Server 6.0 Service Pack 5

I installed Windows 2000 SP3, Coldfusion MX Updater 1, and Sun One Web Server 6.0 Service Pack 5. In 2 separate instances I had the Sun One Web Server Stop serving all html pages immediately after I set automatic access log rotation in the web server administrator. I had the access log rotate every 1440 minutes at 12:00 AM. Although the web server instance appeared to be started, no html pages could be served. In addition, I was not able to undo the changes through the web server administrator. I finally tried to edit the magnus.conf file to remove the new log settings. However, nothing could bring back the web server into a working state. Web Server restarts and entire server reboots did not resolve this issue. I was wondering if anybody else has seen this issue and if so, how did you resolve it? I was forced to completely uninstall the web server and reinstall it. This makes me hesitant to put Sun One Web Server 6.0 SP5 into production. Any other thoughts or experiences with SP5 in a Windows/ColdfusionMX environment? Thanks for any help?

Since removing the log settings from magnus.conf failed to fix the problem, the log settings are probably not the source of the problem.
Did anything else - e.g. ColdFusion configuration changes - occur at about the same time you changed the log settings?

Sun One Web Server 6.1 SP4 crashes when filters are built with CC ver. 5.6

Hi All
We are using NSAPI interfaces to develop the filter for Sun ONE 6.1 SP4 Web Server. Filter was working perfectly fine when it was built using Sun WorkShop 6.0, CC Compiler ver 5.2.
After we upgarded to Sun WorkShop 9.0, CC Compiler ver. 5.6, it no longer works. The web server crashes with Core. Please see the snippet below. There was however no change of code required for the upgrade.
Please let me know if some specific compiler/linker flags has to be used for building filters with CC Compiler ver. 5.6.
bash-2.03$ ./start
Sun ONE Web Server 6.1SP4 B01/20/2005 17:43
warning: CORE3283: stderr: 6950: CSemCounter created a semaphore with ID 25 using key 990470909.
warning: CORE3283: stderr: [10/Nov/2005:18:50:35] [Information] Agent
warning: CORE3283: stderr: Agent is enabled.
warning: CORE3283: stderr: 6950: Cache - created semaphore 26 using key 487154429
warning: CORE3283: stderr: 6950: ResourceCache - created semaphore 27 using key 772367101
warning: CORE3283: stderr: 6950: Cache - created semaphore 28 using key 503931645
warning: CORE3283: stderr: 6950: Cache - created semaphore 29 using key 520708861
info: CORE5076: Using [Java HotSpot(TM) Server VM, Version 1.4.2_04] from [Sun Microsystems Inc.]
catastrophe: CORE3260: Server crash detected (signal SIGBUS)
info: CORE3262: Crash occurred in function realloc from module /usr/lib/libc.so.1
Back Trace of Core
#0 0xfe042974 in t_splay () from /usr/lib/libc.so.1
(gdb) bt
#0 0xfe042974 in t_splay () from /usr/lib/libc.so.1
#1 0xfe0427e0 in t_delete () from /usr/lib/libc.so.1
#2 0xfe0423e4 in realfree () from /usr/lib/libc.so.1
#3 0xfe041f48 in mallocunlocked () from /usr/lib/libc.so.1
#4 0xfe041ce0 in malloc () from /usr/lib/libc.so.1
#5 0xfe04f568 in strdup () from /usr/lib/libc.so.1
#6 0xff1c3038 in INTsystem_strdup_perm ()
from /home/porting/project/sunone/bin/https/lib/libns-httpd40.so
#7 0xff1c84c8 in INTvs_get_doc_root ()
from /home/porting/project/sunone/bin/https/lib/libns-httpd40.so
#8 0xfdb57f4c in __1cKJ2EERunnerIcreateVS6FpkcpknNConfiguration_pnRJ2EEVirtualServer__i_ ()
from /home/porting/project/sunone/bin/https/lib/libj2eeplugin.so
#9 0xfdb528bc in j2ee_vs_create ()
from /home/porting/project/sunone/bin/https/lib/libj2eeplugin.so
#10 0xff1c9444 in __1cPNSAPIVSListenerGinitVS6MpnNVirtualServer_pk1_nIPRStatus__ () from /home/porting/project/sunone/bin/https/lib/libns-httpd40.so
#11 0xff2273e4 in __1cXVSConfigurationListenerQsetConfiguration6MpnNConfiguration_pk1_nIPRStatus__ ()
from /home/porting/project/sunone/bin/https/lib/libns-httpd40.so
#12 0xff225dc8 in __1cUConfigurationManagerQsetConfiguration6FpnNConfiguration__2_ () from /home/porting/project/sunone/bin/https/lib/libns-httpd40.so
#13 0xff245b30 in __1cJWebServerDRun6F_nIPRStatus__ ()
---Type <return> to continue, or q <return> to quit---
from /home/porting/project/sunone/bin/https/lib/libns-httpd40.so
#14 0x10ab8 in main ()
Thanks

I could trace down the problem to the fact that if I don't use the map file (which is passed to the linker using -M mapfile), the plugin works perfectly fine. Further to this if I comment out the local part of the mapfile, it starts working.
mapfile :
NSAPIPlugin.so {
global:
symbol1;
symbol2;
symbol3;
# local:
Is there is any specific linker flag that I have to pass along with -M mapfile with the sun studio 9. What are possibe consequencies if I go ahead with this workaround of commenting out the local directive.

How do I configure a Sun One Web Server 6.1 to run JSP pages

I have a Sun One Web server version 6.1 running on Solaris 10.
The web server is not configured to run JSP pages. When I try and run a JSP page, I get an HTTP 405 error.
Can somebody please point me to the configuration directions, including changes to the obj.conf, magnus,.conf, etc.
Thanks

Web Container is enabled by default.
Here are my config files
$tail -1 magnus.conf
Init fn="load-modules" shlib="/export2/ws6.1sp11/bin/https/lib/libj2eeplugin.so" shlib_flags="(global|now)"$cat obj.conf
# You can edit this file, but comments and formatting changes
# might be lost when the admin server makes changes.
<Object name="default">
AuthTrans fn="match-browser" browser="*MSIE*" ssl-unclean-shutdown="true"
NameTrans fn="ntrans-j2ee" name="j2ee"
NameTrans fn="pfx2dir" from="/mc-icons" dir="/export2/ws6.1sp11/ns-icons" name="es-internal"
NameTrans fn="document-root" root="$docroot"
PathCheck fn="unix-uri-clean"
PathCheck fn="check-acl" acl="default"
PathCheck fn="find-pathinfo"
PathCheck fn="find-index" index-names="index.html,home.html,index.jsp"
ObjectType fn="type-by-extension"
ObjectType fn="force-type" type="text/plain"
Service method="(GET|HEAD)" type="magnus-internal/imagemap" fn="imagemap"
Service method="(GET|HEAD)" type="magnus-internal/directory" fn="index-common"
Service method="(GET|HEAD|POST)" type="*~magnus-internal/*" fn="send-file"
Service method="TRACE" fn="service-trace"
Error fn="error-j2ee"
AddLog fn="flex-log" name="access"
</Object>
<Object name="j2ee">
Service fn="service-j2ee" method="*"
</Object>
<Object name="cgi">
ObjectType fn="force-type" type="magnus-internal/cgi"
Service fn="send-cgi" user="$user" group="$group" chroot="$chroot" dir="$dir" nice="$nice"
</Object>
<Object name="es-internal">
PathCheck fn="check-acl" acl="es-internal"
</Object>JAVA settings in server.xml:
<JAVA classpathsuffix="" debug="false" debugoptions="-Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=n" dynamicreloadinterval="-1" envclasspathignored="true" javahome="/export2/ws6.1sp11/bin/https/jdk" nativelibrarypathprefix="" serverclasspath="/export2/ws6.1sp11/bin/https/jar/webserv-rt.jar:${java.home}/lib/tools.jar:/export2/ws6.1sp11/bin/https/jar/webserv-ext.jar:/export2/ws6.1sp11/bin/https/jar/webserv-jstl.jar:/export2/ws6.1sp11/bin/https/jar/ktsearch.jar">
        <JVMOPTIONS>-Djava.security.manager</JVMOPTIONS>
        <JVMOPTIONS>-Djava.security.policy=/export2/ws6.1sp11/https-alamanac.india.sun.com/config/server.policy</JVMOPTIONS>
    <JVMOPTIONS>-Djava.security.auth.login.config=/export2/ws6.1sp11/https-alamanac.india.sun.com/config/login.conf</JVMOPTIONS>
    <JVMOPTIONS>-Djava.util.logging.manager=com.iplanet.ias.server.logging.ServerLogManager</JVMOPTIONS>
    <JVMOPTIONS>-Xmx256m</JVMOPTIONS>
    <SECURITY anonymousrole="ANYONE" audit="false" defaultrealm="native">
      <AUTHREALM classname="com.iplanet.ias.security.auth.realm.file.FileRealm" name="file">
        <PROPERTY name="file" value="/export2/ws6.1sp11/https-alamanac.india.sun.com/config/keyfile"/>
        <PROPERTY name="jaas-context" value="fileRealm"/>
      </AUTHREALM>
      <AUTHREALM classname="com.iplanet.ias.security.auth.realm.webcore.NativeRealm" name="native">
        <PROPERTY name="jaas-context" value="nativeRealm"/>
      </AUTHREALM>
      <AUTHREALM classname="com.iplanet.ias.security.auth.realm.ldap.LDAPRealm" name="ldap">
        <PROPERTY name="directory" value="ldap://localhost:389"/>
        <PROPERTY name="base-dn" value="o=isp"/>
        <PROPERTY name="jaas-context" value="ldapRealm"/>
      </AUTHREALM>
            <AUTHREALM name="solaris" classname="com.iplanet.ias.security.auth.realm.solaris.SolarisRealm">
              <PROPERTY name="jaas-context" value="solarisRealm"/>
            </AUTHREALM>
    </SECURITY>
    <RESOURCES>
        </RESOURCES>
</JAVA>

Sun One Web Server Start Up Error

I have added filters in my application. I get the below error when I try to restart my application from Sun One Web Server,
info: CORE3282: stdout: PARSE error at line 6 column 10
info: CORE3282: stdout: org.xml.sax.SAXParseException: Element type "filter" must be declared.
failure: ContextConfig[] WEB3524: Parse error in application web.xml
org.xml.sax.SAXParseException: Element type "filter" must be declared.
at org.apache.xerces.framework.XMLParser.reportError(XMLParser.java:1016)
at org.apache.xerces.validators.common.XMLValidator.reportRecoverableXMLError(XMLValidator.java:1252)
at org.apache.xerces.validators.common.XMLValidator.validateElementAndAttributes(XMLValidator.java:2721)
at org.apache.xerces.validators.common.XMLValidator.callStartElement(XMLValidator.java:823)
at org.apache.xerces.framework.XMLDocumentScanner$ContentDispatcher.dispatch(XMLDocumentScanner.java:1222)
at org.apache.xerces.framework.XMLDocumentScanner.parseSome(XMLDocumentScanner.java:380)
at org.apache.xerces.framework.XMLParser.parse(XMLParser.java:908)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:314)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:89)
at org.apache.catalina.util.xml.XmlMapper.readXml(XmlMapper.java:275)
at org.apache.catalina.startup.ContextConfig.applicationConfig(ContextConfig.java:312)
at org.apache.catalina.startup.ContextConfig.start(ContextConfig.java:1005)
at org.apache.catalina.startup.ContextConfig.lifecycleEvent(ContextConfig.java:257)
at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:155)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:3702)
at com.iplanet.ias.web.WebModule.start(WebModule.java:251)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:652)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:355)
at org.apache.catalina.startup.Embedded.start(Embedded.java:995)
at com.iplanet.ias.web.WebContainer.start(WebContainer.java:431)
at com.iplanet.ias.web.WebContainer.startInstance(WebContainer.java:500)
at com.iplanet.ias.server.J2EERunner.confPostInit(J2EERunner.java:161)
failure: ContextConfig[]: WEB3525: Occurred at line 6 column 10
failure: ContextConfig[]: WEB3541: Marking this application unavailable due to previous error(s)
failure: WebModule[]: WEB2705: Context startup failed due to previous errors
failure: WebModule[]: WEB2720: Error initializing naming context for context
javax.naming.NamingException: WEB3880: Unknown context name : StandardEngine[null].StandardHost[https-sitarmor84].StandardContext[]
at org.apache.naming.ContextBindings.bindThread(ContextBindings.java:207)
at org.apache.catalina.core.StandardContext.bindThread(StandardContext.java:4123)
at org.apache.catalina.core.StandardContext.stop(StandardContext.java:3811)
at com.iplanet.ias.web.WebModule.stop(WebModule.java:329)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:3782)
at com.iplanet.ias.web.WebModule.start(WebModule.java:251)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:652)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:355)
at org.apache.catalina.startup.Embedded.start(Embedded.java:995)
at com.iplanet.ias.web.WebContainer.start(WebContainer.java:431)
at com.iplanet.ias.web.WebContainer.startInstance(WebContainer.java:500)
at com.iplanet.ias.server.J2EERunner.confPostInit(J2EERunner.java:161)
Please help.

Which version of Sun web server are you using? Is it 6.1, 7.0 or 7.0 Update2.
6.1 supports Servlet 2.3 spec. 7.0 supports Servlet 2.4 spec and 7.0 Update 1 and 2 support Servlet 2.5.
Servlet 2.3 is DTD based and Servlet 2.4 onwards are schema based.
The DTD or schema will be right after XML prolog in web.xml.
You can use one of the following:
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app xmlns="http://java.sun.com/xml/ns/j2ee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee
http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd" version="2.4">
I am sure your web.xml is not correctly written for the DTD/schema used.
If you take care of that I am sure th problem will go away.
If not, let us know if your webapp's WEB-INF/lib has xerces.jar.

Sun One Web Server instance not starting

I have installed Sun One Web server 6.1. The administrator server is starting up. However, the instance of the web server through which I want to serve the web pages is not starting. Altough, there are no error messages that are shown when I am starting the server. Please help.

I would check the logs directory for a PID file. It could be that there is a bogus pid file and when it tries to start you will get no error message. If there is a PID file delete it and try again.

Error while running sample app HelloWorld on sun one web server 6.1

I tried to deploy and run the HelloWorld - sample application on sun one web server 6.1. It's giving me following errrors.
(1) , root cause: java.lang.NullPointerException
(2) info ( 924): JSP11 Log:unable to load jsp class: jsps.index_jsp
what's the solution for that?
Thanks
Naimesh

Can You please explain me how can I deploy .war file of my application on sun one web server 6.1 ?
It is deployed successfully. It only loads default.jsp and then fives following error:
1) Package netscape.ldap not found in import.
I imported this package to my java file.
Thanks,

Poor Performance of Sun One Web Server 6.0 SP6

We are running on an E450 with 2GB of memory, Solaris 8 2/02 with Recommended and Security Patch Cluster from 31 Jul 03, Sun One Web Server 6.0 SP6, Macromedia ColdFusion 5, JDK 1.4.1_02. We are seeing intermittent (three or four times a day) performance problems, extremely poor response time.
A vanilla, �test� iPlanet web server was put up on port 2443 with https turned on and off. Repeated control tests on file operations (�copy link as�) showed similar results as those described in High Impact above. Changes to add KeepAlive parameters (in magnus.conf) showed no noticeable improvement.
Tests were conducted -- on the test server -- accessing the same file from two clients, one a thin client (TC), the other a Unix workstation (UW).
Results:
1) Sometimes process TC was started first and continued normally while process UW hung up; when this happened, only one httpd process was building cpu time;
2) Sometimes process UW was started first and continued normally while process TC hung up; when this happened, only one httpd process was building cpu time;
3) Sometimes both process TC and process UW continued normally regardless of which was started first; when this happened, two different httpd processes were building cpu time together;
Speculation on Process Management - speculation is that, in the case of the 3rd bullet above, iPlanet assigned different httpd processes to the two requests. In the case of the first two bullets, however, the belief is that iPlanet actually assigned the second request to the same process it had previously assigned the first request. In this case, the second request was left to wait. It appears that most of the work done by httpd children is performed by only two or three children, even when there are 10 available.
Questions;
Why are the other httpd children are not more fully utilized?
What about changing the number of Acceptor Threads?
Could turning on Native Polling help (UseNativePoll in magnus.conf)?
Any other thoughts about what is going on or how to fix the issue?
Thanks for any assistance
Excerpt from /etc/system
* Web Server and ColdFusion Setting
set shmsys: shminfo_shmmax = 2147483647
set shmsys: shminfo_shmmin = 1
set shmsys: shminfo_shmmni = 100
set shmsys: shminfo_shmseg = 50
set semsys: seminfo_semmns = 1750
set semsys: seminfo_semmni = 70
set msgsys:msginfo_msgmax = 65535
set msgsys:msginfo_msgmnb = 65535
set msgsys:msginfo_msgseg = 8192
set msgsys:msginfo_msgssz = 16
* Default is 512, which handles several thousand connections
*set tcp:tcp_conn_hash_size=262144
* Do not set to 0 in solaris 8 on Production Systems
*set sq_max_size=0
set rlim_fd_max=8192
set rlim_fd_cur=8192
* END of Web / ColdFusion Settings
Excerpt from /etc/rc2.d/S69inet
## Web Server and ColdFusion Settings
# Comment out tcp_slow_start_initial, because default is 4
#ndd -set /dev/tcp tcp_slow_start_initial 2
ndd -set /dev/tcp tcp_xmit_hiwat 32768
ndd -set /dev/tcp tcp_recv_hiwat 32768
ndd -set /dev/tcp tcp_conn_req_max_q 1024
ndd -set /dev/tcp tcp_conn_req_max_q0 4096
ndd -set /dev/tcp tcp_time_wait_interval 60000
ndd -set /dev/tcp tcp_keepalive_interval 900000
# Comment out next 4 to accept default
# - change only if tcp longer than 10 seconds expected
#ndd -set /dev/tcp tcp_ip_abort_interval 60000
#ndd -set /dev/tcp tcp_rexmit_interval_max 10000
#ndd -set /dev/tcp tcp_rexmit_interval_initial 3000
#ndd -set /dev/tcp tcp_rexmit_interval_min 3000
# Left out changing ephemeral (short lived) port
#ndd -set /dev/tcp tcp_smallest_anon_port 1024
# Keep default of 1480576
#ndd -set /dev/tcp tcp_cwnd_max 65535
## End of Web / ColdFusion Settings
Excerpt from magnus.conf
RqThrottle 1
MaxProcs 10
StackSize 131072
## Added for lightly loaded systems
KeepAliveQueryMeanTime 1
KeepAliveQueryMaxSleepTime 0

Because the security context is set as a process context, the NSAPI thread locks the process prior to setting the security context. The older NASPI plugin that we are using is not reentrant, it will not work with the mulitthreading model. Under multithreading each thread would have access to the security context of each thread.

Unable to start Sun One Web Server 6.1 SP5 64bits on Solaris 10

Similar Messages

Maybe you are looking for