Unable to stop syslog messages

I keep getting the following syslog messages to my syslog server from our CUPS:-
"133161: Jul 10 2013 09:32:21.387 UTC : %UC_RTMT-2-RTMT_ALERT: %[Name=CriticalServiceDown][Detail= Service operational status is DOWN.<010>Cisco UP XCP Message Archiver,Cisco UP XCP XMPP Federation Connection Manager.<010>The alert is generated on Wed Jul 10 10:32:21 BST 2013 on node 10.210.1.30.][App ID=Cisco AMC Service][Cluster ID=][Node ID=VOIP-TDC-CUPS-PUB-030]: RTMT Alert"
The Cisco UP XCP Message Archiver service and the Cisco UP XCP XMPP Federation Connection Manager service are both activated, but both stopped. I have tried turning off any kind of alarm and trace config for both services but nothing seems to make any difference!!
Any ideas?
thanks

By disabled Ryan is referring to Service Activation. As long as the service is activated, it will attempt to start periodically. Both of these services require specific configuration before they will run.
Please remember to rate helpful responses and identify helpful or correct answers.

Similar Messages

Unable to stop text message not sent notification

About a week ago I received a text from someone that was sent to my email address. I tried to reply to it and now the **** "text message not sent" notification keeps popping up and I can't make it stop. This is driving me insane.
Message was edited by: Verizon Moderator

I just had this very exact problem. I was on the phone with tech support for about 5 hrs until they finally gave up and admitted they had no idea how to fix this. They shipped me a 'like new' phone after all of my complaining, and I haven't had any problems as of yet. Basically your two options are to have them send you a new phone or factory reset your device and hope for the best. I did the reset and my phone just started acting worse.

While composing email, keep getting "Unable to save as a draft" every 30 seconds. I've disable auto save and it didn't help.How can I stop this message?

While composing email, keep getting "Unable to save as a draft" every 30 seconds. I've disable auto save and it didn't help.How can I stop this message?

Mike,
Thank you for taking the time to look at my app. This is my last major stumbling block that I have to resolve for this and other forms in the app.
Actually, I did use the Form Wizard for Auto DML to originally create the form. It was great. It created most of the Buttons, Items and Validations automatically (basically most of the page). I just needed to create some Processes and Computations. Two of which were the Processes to update the 'create_dt' and 'created_by' fields and 'update_dt' and 'updated_by' fields. The Create process updates the fields just fine.
However, my problem seems to be that the Hidden 'create_dt' and 'created_by' fields aren't picking up the values from a record that is being editted. Then when I attempt to save the record those fields are NULL, causing the DB NOT NULL constraint to throw an exception for those fields. In the back of my mind I seem to remember seeing some post stating something to the effect that the information in fields with a Source Type of Database Column is just displayed and does not affect Session State items.
Even with that, I am still wondering just why the 'created_by' Page Item shows the value that is in the DB record being updated, but the 'create_dt" does not (as can be seen in my first posting). It is the 'create_dt' Page Item (:P205_CREATE_DT) not having the DB records 'create_dt' info in it that appears to be the problem.
Thanks,
Tom

RV110W excessive syslog messages

I bought a RV110W wireless router a couple months ago that I've been pretty happy with.
However, I have one significant problem with it. It is configured to send syslog messages to an internal server. Twice now it has gone into a mode where it starts dumping messages like,
ip_conntrack_is_ipc_allowed: ipc_entry_is_full
continuously, at a rate of about 20 per second. It otherwise seems to function normally, but of course if unnoticed my syslog file quickly grows to hundreds or thousands of megabytes. A reboot restores normal operation. It is running firmware 1.1.0.9. A search on the internet turned up no information about this problem.
It may be some corruption is occuring in the router's OS, or perhaps this is something that can be triggered externally (in which case it would be a weak form of DoS attack? Or maybe worse if in this state it is unable to properly apply the firewall rules.)
Looking for some hints on what might be wrong and how to fix.

I have also experieced the same issue. I did not reboot the Wireless Router but the logging has seemed to stop. I'm not sure what caused it either. I did clear the log and it has not been logging the error "ip_conntrack_is_ipc_allowed: ipc_entry_is_full".
I would like a response from Cisco on this error. How do we get Cisco to respond?

When i update to the latest version (7.0.3), there is a message appear to me when i open any application that contains notification such as (What'sApp or BBM),this message said (Connect to iTunes to use push Notification),How I can to stop these message?

When i update to the latest version (7.0.3), there is a message appear to me when i open any application that contains notification such as (What'sApp or BBM) , this message said (Connect to iTunes to use push Notification) , How I can to stop these messages that appear to me constantly?

Hi,
One of my ex-colleagues has installed a NI-DAQ 6.5 in our system. [And I do not see any other naitional instruments card in the CPU of the computer, may be he removed it] I deleted the account and all his files in the system. When I am trying to install version8.0, its not getting installed and giving me a message that I should uninstall the previous version by going to Add/Remove programs in the control panel.
I tried doing that, but the "Change/Remove" button does not seem to work...[There is no response and so unable to install the new version...]
Any idea how can this problem be solved?
It is a windowsXP operating system with SP2 installed on a machine with P4 processor.
Thanks

One solution for 'iTunes has stopped working' message

This worked in my case for iTunes 10.5 on a Dell Inspiron 1525 running 32-bit Vista. Symptoms started after I had to re-install it. Suddenly, whenever I tried to dl anything from the store, the dl would hit 100%, then I'd get the error message and DEP would then shut down the program. Upon re-starting, the dl wouldn't be in my apps list. (However, the actual dl WAS in my iTunes folder -- it's just that iTunes couldn't 'see' it.)
I followed all all -- and I mean ALL -- the Apple guides over the course of 2 days with no success, even after numerous re-installs. Also tried every obsure suggestion I came across in the forums here -- and there were a lot!
What finally worked for me were the suggestions at this link:
http://www.vistax64.com/tutorials/87249-unable-install-latest-version-program-vi sta.html
Following the suggestions there, I discovered uninstalled 'debris' residing in the App Data\Local and App Data\Roaming folders, specifically two Apple folders with content. I manually deleted these. These locations aren't mentioned in the Apple guide to manually uninstalling your iTunes. (http://support.apple.com/kb/ht1923)
I also discovered debris throughout the registry which I removed manually with regedit. (Make backups of your registry before you go rummaging around in there! The usual warnings apply...)
I also found two Quicktime files residing in the main Windows directory. (Ver 10.5 no longer installs Quicktime and I had un-installed my previous versions) I don't think these made a difference but 'off with their heads' anyway. (^-~)
BTW, all of this occurs after I used Revo Uninstaller in moderate mode. So even it didn't catch all the leftover debris. (I'm not brave enough to try it on a more aggressive setting...)
Thought I pass this on in hopes it saves someone some grief....

iTunes has stopped working message after having it open for one minute.
I open itunes and a message comes up after a minute "itunes has stopped working". I got the update automatically to my Windows 7 64 bit pc 10.5.0.142. After reading tons of probelms online about version 10.5
I have decided to do nothing for now. Seems people are putting hours into trying to fix it. I was going to uninstall and reinstall but seems that isn;t working for to many people.
How do we get some help from apple?
Anyone have any answers??? APPLE HELP please!!!!!!!!!!!!!!!

HT5137 I just got a new ipod touch and tried to sync my music to the new ipod. but my computer stated that I needed to update a new file to my new ipod. when I tried it failed. now its on ipod recovery mode and are unable to stop this. what can i do?

Im unable to stop the ipod recovery mode

Just what did the message say?
Just what did you do?
Kust what can't you stop?

SAPINST 4.7 with MS SQL SERVER Error "Unable to stop server"

I'm trying to install SAP 4.7 on
- Windows 2003 Server _ host "tpt"
- SQL Server 2000 SP3 _ new Instance "MYSAP". Collation is already set to "SQL_Latin1_General_CP850_BIN2".
Sapinst ran well on all input data steps.
Next it applied from steps
"Create SAP System Opertion System Groups and Users"
"Check/Adapt File System"
until step "MS SQL SERVER tempdb Parameters" with Processing message "Changing location of
tempdb files", then stopped the installation.
I've got Error_Log file:
Transaction begin ********************************************************
INFO 2004-09-19 10:21:24
Successfully connected to "tpt\MYSAP"
ERROR 2004-09-19 10:21:25
MDB-05039 Unable to stop server "tpt\MYSAP"; error: "[Microsoft][ODBC SQL Server Driver][SQL Server]Herunterfahren des Servers auf Anforderung. (german text means "Server shuts down on request")
[Microsoft][ODBC SQL Server Driver][SQL Server]SQL Server beendet diesen Prozess." (german text means "SQL Server stops this process")
ERROR 2004-09-19 10:21:25
MDB-05034 Call to a threaded function returned "1".
Transaction end **********************************************************
WARNING 2004-09-19 10:30:21
The step doChangeTempDBParameters1 with step key SAPSYSTEM|ind|ind|ind|ind|ind|0|SAPComponent|ind|ind|ind|ind|ind|0|DatabaseServer|windows|ind|mss|ind|ind|0|TempDB|windows|ind|mss|ind|ind|0|doChangeTempDBParameters1 executed with status ERROR.
WARNING 2004-09-19 10:30:21
An error occurred during the installation.
Can you help me?
Thanks very much
thanh

Hello,
you should not use a german version of MS SQL Server.
Regards
Gregor

Syslog messages not showing

Hello,
I have a newly installed LMS 4.1 that had the Syslog feature working for a while.
Recently, the Syslog is no longer displaying any records (neither new or old messages).
Below are the steps I have tried to troubleshoot the problem:
- Installed wireshark : Syslog messages are being received by the LMS server on time
- In the Syslog.log file, I can see that all the Syslog messages are being logged properly
- I tried to disable all the "Syslog Message Filters" but nothing changed
In the SyslogCollector.log, I can find the below logs:
NMSROOT is C:/PROGRA~2/CSCOpx
propFileC:/PROGRA~2/CSCOpx\MDC\tomcat\webapps\rme\WEB-INF\classes\C:\PROGRA~2\CSCOpx\MDC\tomcat\webapps\rme\WEB-INF\classes\com\cisco\nm\rmeng\csc\data\Collector.properties
Unable to find the file C:/PROGRA~2/CSCOpx\MDC\tomcat\webapps\rme\WEB-INF\classes\C:\PROGRA~2\CSCOpx\MDC\tomcat\webapps\rme\WEB-INF\classes\com\cisco\nm\rmeng\csc\data\Collector.properties
NMSROOT is C:/PROGRA~2/CSCOpx
propFileC:/PROGRA~2/CSCOpx\MDC\tomcat\webapps\rme\WEB-INF\classes\com\cisco\nm\rmeng\csc\data\Collector.properties
SyslogCollector - [Thread: main] INFO , 04 Mar 2013 14:54:38,673, Logging System Initialized.
SyslogCollector - [Thread: main] INFO , 04 Mar 2013 14:54:38,674, System Initialized.
SyslogCollector - [Thread: main] INFO , 04 Mar 2013 14:54:38,684, Queue Cap 100000
SyslogCollector - [Thread: main] WARN , 04 Mar 2013 14:54:45,468, Unable to resurrect connection to a subscriber.
SyslogCollector - [Thread: main] INFO , 04 Mar 2013 14:54:45,491, Service started...
I am not sure what to check now. Kindly your suggestions.
Thanks,
Justine.

Hello,
I have a newly installed LMS 4.1 that had the Syslog feature working for a while.
Recently, the Syslog is no longer displaying any records (neither new or old messages).
Below are the steps I have tried to troubleshoot the problem:
- Installed wireshark : Syslog messages are being received by the LMS server on time
- In the Syslog.log file, I can see that all the Syslog messages are being logged properly
- I tried to disable all the "Syslog Message Filters" but nothing changed
In the SyslogCollector.log, I can find the below logs:
NMSROOT is C:/PROGRA~2/CSCOpx
propFileC:/PROGRA~2/CSCOpx\MDC\tomcat\webapps\rme\WEB-INF\classes\C:\PROGRA~2\CSCOpx\MDC\tomcat\webapps\rme\WEB-INF\classes\com\cisco\nm\rmeng\csc\data\Collector.properties
Unable to find the file C:/PROGRA~2/CSCOpx\MDC\tomcat\webapps\rme\WEB-INF\classes\C:\PROGRA~2\CSCOpx\MDC\tomcat\webapps\rme\WEB-INF\classes\com\cisco\nm\rmeng\csc\data\Collector.properties
NMSROOT is C:/PROGRA~2/CSCOpx
propFileC:/PROGRA~2/CSCOpx\MDC\tomcat\webapps\rme\WEB-INF\classes\com\cisco\nm\rmeng\csc\data\Collector.properties
SyslogCollector - [Thread: main] INFO , 04 Mar 2013 14:54:38,673, Logging System Initialized.
SyslogCollector - [Thread: main] INFO , 04 Mar 2013 14:54:38,674, System Initialized.
SyslogCollector - [Thread: main] INFO , 04 Mar 2013 14:54:38,684, Queue Cap 100000
SyslogCollector - [Thread: main] WARN , 04 Mar 2013 14:54:45,468, Unable to resurrect connection to a subscriber.
SyslogCollector - [Thread: main] INFO , 04 Mar 2013 14:54:45,491, Service started...
I am not sure what to check now. Kindly your suggestions.
Thanks,
Justine.

Keep getting unable to load metafile message when trying to download adobe readerx to windows 7 professu=ional

keep getting unable to load metafile message when trying to download adobe reader x

thank you that worked now I am having the same problem trying to download adobe flash
From: Pat Willener <[email protected]>
To: robert hunnell <[email protected]>
Sent: Wednesday, January 21, 2015 12:13 AM
Subject: keep getting unable to load metafile message when trying to download adobe readerx to windows 7 professu=ional
keep getting unable to load metafile message when trying to download adobe readerx to windows 7 professu=ional
created by Pat Willener in Adobe Reader - View the full discussionYou are getting this message while downloading or installing ? If it's during the install, try the offline installer from http://get.adobe.com/reader/enterprise/ If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7116186#7116186 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7116186#7116186 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Adobe Reader by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

When emailing I get two messages Unable to initalize Applet and Unable to get HTML message.

When writing the message these two messages pop up in error windows making it unable to type the message.

ok---I stopped the sync process of photos and now everything else syncs but still cannot eject my ipod. Will try other tips on this website. Thank you

Unable to stop Windows Server Backup

WSE2012. Backup regularly hangs while trying to back up one of our server disks to an external usb drive. Both source and destination drives check out ok - no fragmentation, disk errors, plenty of free space. Tried to Stop the backup gracefully
via the UI by right-mouse clicking the server listed in Dashboard>Devices tab and choosing Stop backup... but this is unable to stop it.
Tried to stop the block level backup engine service exe (wbengine.exe) but it appears to be orphaned and unkillable.
Task Manager shows wbengine.exe is running, so I've tried doing these things from an elevated command prompt:
1. wbadmin stop job -- this returns The process could not be terminated. There is no running instance of the task.
2. TASKKILL /F /IM wbengine.exe - same error message as above.
Short of rebooting the machine or unplugging the usb drive (which sometimes works but leads to data corruption), how can the backup be stopped and restarted?

Mandy,
Thank you but no such luck. We're running Windows Server 2012 Essentials and we don't have 3rd-party software running on the server except for BackupAssist. We started with wbadmin, have moved to trying BackupAssist (BA), now am working with
their support team. Latest suggestion is to go back to native Windows Server Backup. But I have seen this issue before we installed BA. I will wait until we duplicate the problem there before responding here again, but my best solution is
to either unplug the backup drive (forcing a cancellation) or reboot the server. This has really got us baffled.

MDB,MDB container or JMS adapter stops processing messages from JMS queue

Hi guys,
we have created a component using Enterprise Java Beans, let's say a product catalog, deployed it on a Glassfish v2 instance, and connected it to a legacy system using JMS and Sun MQ v4.1 as messaging system. The catalog component thus starts one MDB that listens on a JMS queue, let's say a queue named catalog_business_events_in, and waits for incoming messages, i.e. in our case update events. The problem is, that in general this approach works well, but sometimes the MDBs/JMS adapter stops for some reason fetching and processing messages from the JMS queue. We don't know why - no exceptions, etc.. Seems to be a Glassfish EJB container, JMS adapter or Sun MQ configuration issue. It seems to be that our component is not the problem.
The messages are compressed/uncompressed by Sun MQ automatically. We actually have 2 Sun MQ instances in clustered mode running to have some kind of failover - no HA cluster, yet. Sun MQ instances are accessed from Glassfish instances running in different Glassfish clusters - so we have a dedicated Sun MQ cluster not a Sun MQ instance per Glassfish instance. Each Glassfish instance is configured such that it knows both Sun MQ instances to allow automatic failover.
Has someone an idea, why the MDBs/ MDB container/ JMS adapter - stops processing messages? We are kind of puzzled as it happens more often now and apparently when traffic is (very) low not high!
Thanks for your help.
Cheers,
Martin
Edited by: east1979 on Jan 13, 2009 8:06 AM

Hi Manoj,
I have a very similar if not identical issue,
Error while running realtime jobs that read from JMS tables via JMS MQ adapter:
15/11/12 09:10:08 JMS GET OPERATION ERROR : TIMEOUT.UNABLE TO RECEIVE RESPONSE FROM THE INVOKED DATA SERVICES SERVICE.ADAPTER OPERA
TION TO CONTINUE.
15/11/12 09:10:15 Communication Error. See real time job log for details.
Dump available:
https://sapmats.wdf.sap.corp/download/download.cgi?id=5C0KZAHA3RSXBJW3ABLMUUT2P5UUKWO2TM3EJDM5W2HGDZUDID
Version of DS:14.0.3.273
Any comments?
Thansk and kind Regards,
Kenneth

Disable specific syslog message

Hi,
How do I stop the "%ENVMON-4-FAN_LOW_RPM" messages?
I have about 30 routers that have this problem, and the syslog messages flodding me...
My current config in the routers is "logging trap debugging" and I want to keep it that way.
I only need to stop the fan related messages.
Thanks,
Meir

Hi,
I think you can only set the severity level for the global logging higher than level 4 (warnings).
I have only the config for a switch at the moment, but I think it should ne the same on a router.
For the local logging buffer:
logging buffered errors ! errors = severity level 3
For the syslog server:
logging trap errors
I never heard something about to disable one special syslog message on the device.
But you can create a message filter for that syslog message in LMS under RME -> Tools -> Syslog -> Message Filters.
Sven

Syslog messages

I do not want any mail messages to be logged to /var/log/syslog. I want all mail messages to go to /var/log/maillog. The contents of my syslog.conf file looks like:
mail.none;*.err;kern.notice;auth.notice /dev/sysmsg
*.err;kern.debug;daemon.notice;mail.crit /var/adm/messages
*.crit /var/log/critical
mail.info /var/log/maillog
auth.info /var/log/authlog
Now, I have mail messages being logged to the syslog file and the maillog file. There is a <TAB> between then facilties and the action fields. Any ideas on how to stop mail messages from going to the syslog file?

Just check if you have "mail.debug" entry set to /var/log/syslog. If so, then you'll get
the messages in both /var/log/syslog and/var/log/maillog.
I can think of other such entries at the top as,
* /var/log/syslog or
mail.* /var/log/syslog

Unable to stop syslog messages

Similar Messages

Maybe you are looking for