Unable to stop the alarm in Nokia 5233

Hi ,
I am using Nokia 5233 for past 3 months. I am facing a problem while using the Alarm.
When the alarm generated, i am unable to stop it. When i pressed the close button its going into SNOOZE mode but not into stop mode. 
This is happening when my mobiles is locked.
Is there anyway to stop the alarm, eventhough the mobile is locked.
Thanks,
Srikanth.

Make sure that it did not end up being added as a the Keynote Soundtrack +(Documents>Audio Tab)+. If it is the soundtrack, it will play throughout the Keynote, if it is just added to a slide, it should stop when you change slides.

Similar Messages

  • How can I stop the alarm using fingerprint function

    I set two alarm records in my 5s and i was aware. I use fingerprint to stop it but it didn't work and each alarm rang for 15 min. I couldn't stop it. How can i stop the alarm?

    You can either snooze it, or slide to unlock to stop it.

  • Unable to stop the server

    Hello,
    I have Weblogic 9.2 server.
    I was having one server domain installed and running fine on port 7006.
    Yesterday I created a new domain on port 7106. The new domain got created successfully but after that I am not able to stop the server.
    It gives following error.
    Failed to connect to t3://138.240.37.57:7006: Destination unreachable; nested exception is:
    java.net.ConnectException:No available router to destination
    Please help.
    Thanks,
    Yatrik

    can you share more details like What kind of Environment and all. Then we can understood more about This issue
    Regards
    Babu.

  • Unable to stop the event logs on access point console

    Hi team,
    I have an AIR-LAP1131AG-E-K9 access point having ios c1130-k9w8-mx.124-21a.JHB1.
    When I am trying to take the console of it there are many logs generated like LWAPP ...Go join the controller, Discover controller etc. and the ap is unable to register to the controller(2112 with ios version 6.0.199.4). I'm trying to enter the command but there are many event msg generated....How do i stop this event log. I tried entering the command no debug all. but still there are many logs...
    I want to enter the the following commands
    #lwapp ap  ip address <ip addr>.
    #lwapp a pip default-gateway <gateway ip addr>
    #lwapp ap controller ip addr <controller ip>
    #wr me
    Revert me back on urgent basis
    Thanks in advance..

    Thanks Rashika,
    Now the access point got registered to the controller..This happened becuse of country Code..
    I have changed the country code to UK, Belgium it started working fine.
    Initially when it was IN the access point was not getting register..
    But now the problem which arised is that the user is unable to get authenticated to the radius server.
    Radius server is reachable and we have done every changes required for radius server authentication.
    Users are getting rejected.
    Customer is saying that the radius server is in IN domain and the WLC/access point is in UK,BE and hence the users are unable to connect..
    Is it so??
    Rply
    Thanks in advance...

  • Unable to Stop the Music in Keynote '09

    MacBook Pro 10.6.3
    Keynote 5.0.3
    Previously I have been able to "ttach" a sound to a frame - and have it QUIT playing after I went to the next frae.
    Now it keeps playing.
    How do I stop it after just one frame?

    Make sure that it did not end up being added as a the Keynote Soundtrack +(Documents>Audio Tab)+. If it is the soundtrack, it will play throughout the Keynote, if it is just added to a slide, it should stop when you change slides.

  • HT5137 I just got a new ipod touch and tried to sync my music to the new ipod. but my computer stated that I needed to update a new file to my new ipod.  when I tried it failed.  now its on ipod recovery mode and are unable to stop this.  what can i do?

    Im unable to stop the ipod recovery mode

    Just what did the message say?
    Just what did you do?
    Kust what can't you stop?

  • Unable to pick the call when 5800 is in lock mode ...

    HI,
    My 5800 mobile has been updated with  V40.0.005.C03.01 through nokia service center.
    After this instalation, I have faced following problems in LOCK MODE. I am not sure, whether it is setting problem or software bug.
    1. In lock mode, whenever I get a call, I am not able to receive the call or unlock using touch screen buttons, though it displays 2 buttons in screen. 2 Buttons: Answer & Unlock.
    But I can use the physical buttons(Grean & Red) to receive or cancel the call and I can unlock the mobile using side physical scroll button. So why these touch screen buttons (Answer & Unlock)  not working, in lock mode.
    2. In lock mode, I can't snooze or stop the alarm using touch screen buttons, though it displays 2 buttons in screen. 2 Buttons: Stop & Snooze. But I can use only Red physical button to snooze. But I can't use any other buttons niether physical nor touch buttons to stop the alarm. Only way to stop the alarm is first snooze the alarm using Red physical button, then unlock the mobile using side physical scroll button, then goto clock, check the alarms list, then click on remove touch button. So why these touch screen buttons (Stop & Snooze)  not working, in lock mode.
    This is happening only after software update to V40.0.005.C03.01 .   I am not sure, whether it is setting problem or new software bug.
    Thanks.
    Prakash
    Solved!
    Go to Solution.

    Don't really wanna do the hard re-set and loose everything on the phone and start from scratch again. I took it to the retailer that sold the phone to me last week and they want to replace it with a brand new one, as they think it's a fault with the phone. While am happy to get a brand new one, I don't wanna do that either and go through downloading all the applications I have downloaded on mine, especially knowing that this retailer only has in stock the 5800 phone with V20 loaded on them from the factory, so I will end-up going through the software upgrade process all over again to V31 and probably face the same problem at the end.
    I think I will just get used to answering the calls using the green button instead.
    Thanks,
    Jalal
    Sydney-Australia

  • How To stop the Security Deposited Calculation at the time of move out.

    Hi Guys,
    I am working on this issue from last week still unable to stop the calculation of SD in Final bill at the time of Move out, i have blocked the main and sub transaction, any help will be appreciated as early as possible, this issue has to be solved on weekend.
    Regards
    K. Shilpa

    Hi Shilpa,
    First thing I will say that if you reverse an actual payment from customer's account, there are many impacts on the customer side and on SAP side. I think you have already taken care all these things.
    Now for the first point if you want the open SD will not appear in the print document, you can do it by reversing the security deposit or by invoicing printing configuration. For the first option you can go to change security deposit (FPSEC2) and reverse it. To do this all the SD documents should be in open status.
    For the second option you can go to the following menu path:
    SPRO-SAP Utilities-Invoicing-Invoice Processing-Item Selection in Invoicing-Item Selection in Account Maintenance/ Define Sub-Items
    In the above menu path for clearing type R4 (Invoicing) and periodic billing (R41),  you can control the items which will be printed in the invoice. Select the clearing type and click on the 'Item selection on bill print out' on the left hand side. For the clearing category (maintained at contract account level) you can maintain the main and sub transaction of security deposit (might be 0020 / 0020) and you can see a field 'IP' (Item Will Be Printed on the Bill) where you should maintain it blank. If you do that, security deposit will not be picked up in the invoice document. However it will remain open in the account if you just stop the printing of SD and keep it in the account.
    However it totally depnds on the business requirement and related implications whether you want to reverse the SD or you want to keep this in account and do not want to show them on the bill.
    Now for the second point you have mentioned, you need to first decide what you will do with the SD payments made by customer.
    Either you can release the SD amount and refund it to customer or the amount can be adjusted with the next invoice. Again it depends on business requirement whether you will refund any payment made against SD or you will simply reverse all open security deposits.
    Also if you want to stop the SD creation process now onwards, you need to revert all SD configuration like main / sub transaction configuration for SD, default SD releted settings etc. There is no standard process for it. If you want to reverse the SD, you can write a custom program. The configuration related things need to be done manually.
    Since all the things will impact the business process or customer, I hope you will take care those things before coming to a conclusion.
    Thanks.
    Nirmalya

  • Can I use Hey Siri to silence the alarm after a timer finishes?

    I can use Hey Siri to set a timer.
    But at the end of the timer, I have to walk over and touch the device to stop the alarm.
    Is there any command I can use after Hey Siri to tell the device to stop sounding the alarm?
    Before you reply, please note that I am not looking for replies of this type:
    I want to know the answer to this too
    Gosh that sounds frustrating
    Have you tried searching Google
    Have you tried rebooting
    Take your phone to the Genius Bar
    As I have already considered these responses.

    If you can add a step to disable backup job start of ETL and enable backup job after ETL completes.
    exec msdb..sp_update_job @job_name = 'LS backup Job Name', @enabled = 0 --Disable
    exec msdb..sp_update_job @job_name = 'LS backup Job Name', @enabled = 1 --Enable
    create a record in a table:
    In those line you can create a new job as well which will check record in table if its 0(ETL completed) then enable the backup job and if its 1(ETL running/started) then disable the job. This job will run every 5 mins to check the flag in table. Depending
     on ETL status it will enable or disable tlog backup job that way you will be able to resume log shipping without delay. 

  • Unable to open service BOE120 TOMCAT and Unable to STOP severs in CCM

    Hi Everyone,
    i have installed business object Edge series 3.0 in windows 2008 server standard edition. I also installed crystal 2008, xcelsius engage 2008 , live office, SAP GUI 7.10. I did not installed SAP Integration yet. The installation has done in 'D-drive' instead of 'C-drive'. The installation has been done successfully for above products.
    Now i am facing two problems.
    In CCM, both  TOMCAT and SIA are  in running state.
    1. when i  try to open tomcat configuration, i am getting an error as below
      ' Unable to open service BOE120 TOMCAT'
    2. In CCM, when try to stop the TOMCAT or SIA, system showing an error
      'Unable to stop the service, Access Denied'.
      But when i go to windows services, there i can able to stop tomcat.
    What could be the reasons for above error? Wait for your reply.
    Thank you all in advance

    Hi,
    when you want to stop the services via ccm are you logged in as a user with local administrator rights ?
    Regards
    -Seb.

  • How to stop the std SUS method from being called

    Hi
    I am working on SRM - EDI integration for NON SUS vendor.I am using a custom mapping and custom method call in this case.i have placed the logic in the std. mapping BADI - BBP_SAPXML1_OUT_BADI.i am triggering my custom method call in this method only.but i am unable to stop the control flow here after as i need not to trigger the Std. process.
    Regards,
    Durgaprasad Kare.

    Hi Durga,
    The BADI BBP_SAPXML1_OUT_BADI is meant for mapping purposes in the outbound proxy object and cannot be used to control the message flow.
    What I would suggest you to code the custom logic in the BBP_DOC_SAVE_BADI where is you can check the vendor and determine the custom message needs to be trigerred. Besides you have a check at XI level to block those mesages that are not needed.
    Regards
    Kathirvel

  • Nokia 5233 cable modem driver file

    Hi guys. Can anyone give me the link to nokia 5233 cable modem driver file (.inf) I just need to use the modem functionality hence no pc suite or ovi suite. Please

    Hi harshpranami,
    Drivers for cables can be found here, just choose the relevant cable that you use to connect your Nokia 5233 to your PC.
    Hope this helps and let us know how it works out.
    Regards,
    haZey
    If you find this post helpful, a click upon the white star at bottom would always be appreciated.
    If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

  • How can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,-

    how can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,…"

    It sounds like if you open Preferences in Word there will be a place where you can specify where to store autorecover files. Right now it sounds like it's pointing to somewhere that doesn't exist.

  • I am trying to install a language disc. I clicked on the installer. It ran for a long time without installing. I click stop installing and it says it is stopping but is doing nothing. I am unable to eject the disc or stop anything.

    I am trying to install a Portugese language disc. I clicked on the installer icon and it said it was installing, but it ran forever without doing anything. I clicked "stop installing" and it says "stopping", but it is doing nothing. I am unable to eject the disc or do anything because it says an operation is in progress.

    Please provide some info on the disc, where it comes from, who made it, etc.  Also tell us what version of OS X you are running.

  • Is there a way to stop the brightness from going up when alarm goes off?

    I have an iPhone 5s running iOS 7.0.6. I plug it in at night next to my bed and use it as an alarm clock. I am running the NiceClock app because it has a great black background with slim red clock numbers (doesn't throw a lot of glare). I am using the built-in Clock app that comes with the current iOS as the alarm (NiceClock, while great for a simple bedside clock with no glare, does not come with an alarm). I set my iPhone's brightness on the lowest possible setting to keep the backlight glare down. It's great. Low glare, and I can still see the time if I wake up in the middle of the night without having to fumble with the iPhone. My problem is when the alarm goes off the brightness level jumps up to maximum. Is there a way to prevent the brightness level of the iPhone from changing when the alarm goes off?

    Yes the calendar is gone. I guess it is the notification center I am referring to that comes down when I accidently swipe the top of the screen. Is there a way to stop of notification center from coming down if you swipe the screen? I figured out how to stop the control center from coming up if you swipe the bottom on the screen. Now I just need to figure out how to stop the top of the screen from doing the same thing

Maybe you are looking for