Unable to stop the server
Hello,
I have Weblogic 9.2 server.
I was having one server domain installed and running fine on port 7006.
Yesterday I created a new domain on port 7106. The new domain got created successfully but after that I am not able to stop the server.
It gives following error.
Failed to connect to t3://138.240.37.57:7006: Destination unreachable; nested exception is:
java.net.ConnectException:No available router to destination
Please help.
Thanks,
Yatrik
can you share more details like What kind of Environment and all. Then we can understood more about This issue
Regards
Babu.
Similar Messages
-
Messaging Server 4: WebMail login returns "unable to locate the server"
When I log into WebMail, the following error occurs:<BR>
<P>
Netscape is unable to locate the server <I>hostname</I>.
Please check the server name and try again.
<P>
<B>End User</B>
<P>
First verify that you cannot reach the hostname
server by using the ping
utility (Windows NT or Unix). If
you cannot reach the host, report this problem to the appropriate system
administrator or help desk.
<P>
However, if you can reach the host with ping
, then the problem may be a minor
networking issue that you can resolve. There is also the possibility that
the network has been configured to allow users to ping
unreachable systems. You can use the
following actions to rule out possible sources of the problem:<BR>
<P>
<OL>
<LI>Attempt to log in to WebMail again. If you can log in successfully, then
the problem with the WebMail server may have been temporary or is an
intermittent problem.
<P>
<LI>End the current browser session and then restart the browser and try to
connect to the WebMail server again. If you can log in successfully, then,
most likely, the browser had cached some old network information that was
reset when you exited the browser.
<P>
<LI>Verify the DNS configuration of your system and then restart the entire
system.
</OL>
<P>
If the above actions do not work, then you will need to contact the
system administrator or the help desk.
<P>
<B>Mail Server Administrators</B>
<P>
As the problem with connecting to the WebMail server is caused by configuration
or availability problems, make sure that users who report this problem have
HTTP network connectivity to the hostname. The following scenarios are
possible causes of connectivity problems:<BR>
<P>
<UL>
<LI>Users have the wrong proxy.
<LI>Users are being blocked by firewalls.
<LI>Users are connecting from the wrong network.
<LI>Users specify the incorrect DNS servers.
</UL>
<P>
In addition, users may also report that the server is down. As the login page
for WebMail does not contain URL links that are FQDNs or absolute path names,
it is possible that users may still be able to see the login window if it was
cached or loaded before the server stopped working.
<P>
In some cases, it may be necessary to access the hostname that is used in the
WebMail links. This hostname setting is stored in the configdb
parameter
service.smtp.messagehostname.
This configuration setting is not mentioned in the Messaging Server
documentation.
<P>
The messagehostname is a
configuration value that affects many server functions. For this reason, do
not make changes to this value without first considering the effects of such a
change on other WebMail settings, such as the postmaster group and user
mailhost values. Also, please note that changing messagehostname
is not supported from Console.
<P>
For more information on messagehostname
, please see "What is messagehostname?"
at<BR>
article 4250
<P>
You can also find documentation for configutil
in the Messaging Server Administrator's
Guide at the following URL:<BR>
<P>
http://docs.iplanet.com/docs/manuals/messaging/nms41/ag/cmdline.htm#1003887
<P>
<B>Note:</B> You must stop and restart the HTTP service in order for changes to
the messagehostname to
take effect.When I log into WebMail, the following error occurs:<BR>
<P>
Netscape is unable to locate the server <I>hostname</I>.
Please check the server name and try again.
<P>
<B>End User</B>
<P>
First verify that you cannot reach the hostname
server by using the ping
utility (Windows NT or Unix). If
you cannot reach the host, report this problem to the appropriate system
administrator or help desk.
<P>
However, if you can reach the host with ping
, then the problem may be a minor
networking issue that you can resolve. There is also the possibility that
the network has been configured to allow users to ping
unreachable systems. You can use the
following actions to rule out possible sources of the problem:<BR>
<P>
<OL>
<LI>Attempt to log in to WebMail again. If you can log in successfully, then
the problem with the WebMail server may have been temporary or is an
intermittent problem.
<P>
<LI>End the current browser session and then restart the browser and try to
connect to the WebMail server again. If you can log in successfully, then,
most likely, the browser had cached some old network information that was
reset when you exited the browser.
<P>
<LI>Verify the DNS configuration of your system and then restart the entire
system.
</OL>
<P>
If the above actions do not work, then you will need to contact the
system administrator or the help desk.
<P>
<B>Mail Server Administrators</B>
<P>
As the problem with connecting to the WebMail server is caused by configuration
or availability problems, make sure that users who report this problem have
HTTP network connectivity to the hostname. The following scenarios are
possible causes of connectivity problems:<BR>
<P>
<UL>
<LI>Users have the wrong proxy.
<LI>Users are being blocked by firewalls.
<LI>Users are connecting from the wrong network.
<LI>Users specify the incorrect DNS servers.
</UL>
<P>
In addition, users may also report that the server is down. As the login page
for WebMail does not contain URL links that are FQDNs or absolute path names,
it is possible that users may still be able to see the login window if it was
cached or loaded before the server stopped working.
<P>
In some cases, it may be necessary to access the hostname that is used in the
WebMail links. This hostname setting is stored in the configdb
parameter
service.smtp.messagehostname.
This configuration setting is not mentioned in the Messaging Server
documentation.
<P>
The messagehostname is a
configuration value that affects many server functions. For this reason, do
not make changes to this value without first considering the effects of such a
change on other WebMail settings, such as the postmaster group and user
mailhost values. Also, please note that changing messagehostname
is not supported from Console.
<P>
For more information on messagehostname
, please see "What is messagehostname?"
at<BR>
article 4250
<P>
You can also find documentation for configutil
in the Messaging Server Administrator's
Guide at the following URL:<BR>
<P>
http://docs.iplanet.com/docs/manuals/messaging/nms41/ag/cmdline.htm#1003887
<P>
<B>Note:</B> You must stop and restart the HTTP service in order for changes to
the messagehostname to
take effect. -
Manged servers is not getting started (Unable to initialize the server)
Hi,
I have weblogic 7.0 is installed in solaris . I configured one of my managed servers on port 80 , while starting the managed server it's giving me the following error:
<May 27, 2009 12:20:05 PM IST> <Emergency> <WebLogicServer> <000350> <Unable to create a server socket on Channel Default for: 172.16.42.16, port: 80. java.net.BindException: Permission denied Perhaps the address 10.16.39.16 is incorrect or another process is using port 80.>
<May 27, 2009 12:20:06 PM IST> <Emergency> <Security> <090085> <Server failed to bind to any port such that it is not reachable from the console.>
<May 27, 2009 12:20:06 PM IST> <Emergency> <WebLogicServer> <000342> <Unable to initialize the server: Fatal initialization exception>
ontext.java:2727)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:2700)
at weblogic.servlet.internal.HttpServer.preloadResources(HttpServer.java:563)
at weblogic.servlet.internal.WebService.preloadResources(WebService.java:476)
at weblogic.t3.srvr.ServletInitRunner$1.run(ServletInitRunner.java:50)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:780)
at weblogic.t3.srvr.ServletInitRunner.run(ServletInitRunner.java:46)
at java.lang.Thread.run(Thread.java:479)
<May 27, 2009 12:22:38 PM IST> <Emergency> <WebLogicServer> <000350> <Unable to create a server socket on Channel Default for: 172.16.42.16, port: 80. java.net.BindException: Permission denied Perhaps the address 172.16.42.16 is incorrect or another process is using port 80.>
<May 27, 2009 12:22:39 PM IST> <Emergency> <Security> <090085> <Server failed to bind to any port such that it is not reachable from the console.>
<May 27, 2009 12:22:39 PM IST> <Emergency> <WebLogicServer> <000342> <Unable to initialize the server: Fatal initialization exception>
Please do needful to reslove the problem.
Rgds,
Krikar.Hi Krikar,
Make sure -
1. IP is correct.
2. Specified port is not in use
For getting the ports-in-use list, follow below link -
http://www.unix.com/sun-solaris/87330-list-tcp-ports-process.html
Regards,
Anuj -
Unable to initialize the server: Server failed to bind to the requested por
I am facing the error while starting the server. I see the following error.
<Sep 26, 2007 11:49:54 PM EDT> <Emergency> <WebLogicServer> <BEA-000350> <Unable to create a server socket on Channel Default for: 162.86.20.87, port: 8101. java.net.BindException: Address already in use Perhaps the address 162.86.20.87 is incorrect or another process is using port 8101.>
<Sep 26, 2007 11:49:54 PM EDT> <Emergency> <Security> <BEA-090085> <Server failed to bind to the configured port. The port may already be used by another process.>
<Sep 26, 2007 11:49:54 PM EDT> <Emergency> <WebLogicServer> <BEA-000342> <Unable to initialize the server: Server failed to bind to the requested port. See preceeding log message for details.>
The WebLogic Server did not start up properly.
Exception raised: 'weblogic.server.ServerLifecycleException: Server failed to bind to the requested port. See preceeding log message for details.'
Reason: Server failed to bind to the requested port. See preceeding log message for details.
If the port is already in use how to find which server is running on that port, how to find the process and kill it. I am using weblogic 8.1 sp4 in Solaris 8.Bruce:
It sounds like (as you already note) failed to shutdown WLS, that is why the
.loc file was held and why the port is in use, WLS process was still
running. To see why it failed to shut down, I would examine the
weblogic.log, aslo the servers std out and err. Additionally taking a
thread dump (if possible) on the "it wont shut down" wls java process should
show (maybe unless the VM is hosed), where/what is hanging on/around. Do
you happen to have native code running with wls, say a type 2 JDBC driver?
Otherwise it sounds like a VM bug. But more data is needed to be sure.
Cheers
mbg
"Bruce Bryan" <[email protected]> wrote in message
news:3ef08499$[email protected]..
I was shutting down the WLS server using the console shutdown and itfailed to shutdown completely. I then attempted to use the kill command on
the process which usually works. This time I was unable to kill the process
without using the kill -9 command. When I attempted to bring the server
back up I got a failure to get a lock on the embedded ldap. I removed the
.loc file and came further up but was unable to get further than the
listener ports which were still locked to the old process. Do you know of
anything I can do the get the WLS server back up without rebooting my
Solaris server????
netstat -an shows the port is in use but the only process that is alloweduse that port is WLS. -
Hello,
Today i tried accessing transitbux.com with mozilla, but i'm getting this kind of a error as mentioned below:
Unknown Host
Description: Unable to locate the server requested --- the server does not have a DNS entry. Perhaps there is a misspelling in the server name, or the server no longer exists. Double-check the name and try again.
Can anyone help me please, and the same website is accessible with my phone.
Help me please. :(
Regards
-Try http://www.transitbux.com/
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies" -
Deploying the new war file without stopping the server
How can i deploy my updated application war file without stopping the server as the user sessions in my application and transactions as well as users request has to be carried out during the deploy process.
Edited by: Kaywin on Jan 28, 2008 10:39 AMYou can update web application via Administration GUI and then deploy the configuration. You don't have to restart the server for it. Assuming you are using 7.0 u2, follow the steps as below to update the web application:-
- Login to Administration Console
- Go to Virtual Servers tab under a Server Configuration, for deploying a web application (Configurations -> <config_name -> Virtual Servers -> <vs_name>)
- Click on Web Applications tab and check the web application in the "Web Applications" table and then click on Update button.
- Point to the updated war file in the pop up and click ok
- Now just deploy the configuration by clicking on "Deployment Pending" link on the top right of the page
Here is the docs page which has more information about web application deployment -
http://docs.sun.com/app/docs/doc/820-2202/gbrmp?a=view
Hope this helps -
My adobe cc keeps telling me that its unable to reach the server
my adobe creative cloud keeps telling me that its unable to reach the server. It told me to check the firewall and i did but im still unable to download programs
Mybe,because you did not installed well,or because the server does not work propperly at that time!
-
Unable to recognize the server status in OEPE, shows error alert
Hi,
On windows 32 , I installed the WSL 10.3.3 + OEPE and the OSB 11g.
I have configured the a base_domain with a dtabse of 10g (10.3) Express edition.
When I try to start the server from OEPE (Eclipse), the server starts and the console show the server is RUNNING. Even I can connect to OSB Console from Browser.
However, the servers tab in the eclipse unable to recognize the status, and returns back to STOPPED with an Alert message "Server xxxx unable to start.
So I am not able to do anything in the OEPE, its urgent please, any help .
Thanks in advance.
-- KhaleelHi Ravi,
Thanks for the suggestion. Actually the server and domain all are running well. I can start and stop from the startup menus and command scripts.
The only issue is in the Eclipse (OEPE) when I try to connect the server. However I found the solution that I need comment the localhost entry in hosts file as below.
# 127.0.0.1 localhost
Now the server is connecting well. However I have another issue, that I am not able to shutdown the server from startup menus. I suspect the t3 protocal and HTTP protocal related. If you have any suggestions please help me.
Note: if still have issues then try by removing the LAN connection, or install the Microsoft Loopback Adapter.
But I am still looking for options without commenting the localhost in the hosts entry.
--Khaleel
Edited by: Khaleel Shaik on Dec 8, 2010 2:58 PM -
Unable to start the server Instance
Hello!!
I am using the JDeveloper(11g) IDE first time.I am reading the help provided with the IDE.Uptill now I know how to create an application.When I run the jsp file for first 2-3 times it runs well, but after that the error comes like "Failed to start the server instance" and due to this I unable to proceed my work.
Please tell me the exact solution to this error.When I run a JSPX file,following error comes in the log file:
http://Running application Sample1 on Server Instance DefaultServer...
Uploading credentials.
---- Deployment started. ---- Feb 21, 2009 4:07:56 AM
Target platform is (Weblogic 10.3).
Running dependency analysis...
2009-02-21 04:07:57.128: Writing WAR file to F:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs\Sample1\Sample1-ViewController-webapp
2009-02-21 04:07:57.394: Wrote WAR file to F:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs\Sample1\Sample1-ViewController-webapp
2009-02-21 04:07:57.41: Writing EJB JAR file to F:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs\Sample1\Sample1-Model-ejb
2009-02-21 04:07:57.488: Wrote EJB JAR file to F:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs\Sample1\Sample1-Model-ejb
2009-02-21 04:07:58.675: Writing EAR file to F:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs\Sample1
2009-02-21 04:07:58.847: Wrote EAR file to F:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs\Sample1
#### Deployment incomplete. #### Feb 21, 2009 4:08:01 AM
oracle.jdeveloper.deploy.DeployException
at oracle.jdevimpl.deploy.adrs.wls.Jsr88AdrsRemoteDeployer.initializeHelper(Jsr88AdrsRemoteDeployer.java:52)
at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.deployImpl(Jsr88RemoteDeployer.java:139)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdeveloper.deploy.common.BatchDeployer.deployImpl(BatchDeployer.java:82)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdevimpl.deploy.fwk.DeploymentManagerImpl.deploy(DeploymentManagerImpl.java:436)
at oracle.jdeveloper.deploy.DeploymentManager.deploy(DeploymentManager.java:209)
at oracle.jdevimpl.runner.adrs.AdrsStarter$4$1.run(AdrsStarter.java:1316)
Caused by: oracle.rc.asadapter.connection.ConnectionException: J2EE Deployment SPI:260010Unable to connect to 't3s://127.0.0.1:7002' as user, 'weblogic'. Error received: null
at oracle.rc.asadapter.weblogic.connection.Weblogic10Jsr88Provider.getPresentation(Weblogic10Jsr88Provider.java:100)
at oracle.rc.asadapter.connection.AppServerConnectionImpl.getPresentation(AppServerConnectionImpl.java:65)
at oracle.jdevimpl.deploy.adrs.wls.Jsr88AdrsRemoteDeployer.initializeHelper(Jsr88AdrsRemoteDeployer.java:43)
... 11 more
Caused by: javax.enterprise.deploy.spi.exceptions.DeploymentManagerCreationException: J2EE Deployment SPI:260010Unable to connect to 't3s://127.0.0.1:7002' as user, 'weblogic'. Error received: null
at weblogic.deploy.api.spi.deploy.WebLogicDeploymentManagerImpl.<init>(WebLogicDeploymentManagerImpl.java:121)
at weblogic.deploy.api.spi.factories.internal.DeploymentFactoryImpl.getDeploymentManager(DeploymentFactoryImpl.java:84)
at oracle.rc.asadapter.weblogic.connection.Weblogic10Jsr88Provider.getPresentation(Weblogic10Jsr88Provider.java:97)
... 13 more
Caused by: weblogic.deploy.api.spi.exceptions.ServerConnectionException: J2EE Deployment SPI:260010Unable to connect to 't3s://127.0.0.1:7002' as user, 'weblogic'. Error received: null
at weblogic.deploy.api.spi.deploy.internal.ServerConnectionImpl.getMBeanServer(ServerConnectionImpl.java:251)
at weblogic.deploy.api.spi.deploy.internal.ServerConnectionImpl.getMBeanServerForType(ServerConnectionImpl.java:191)
at weblogic.deploy.api.spi.deploy.internal.ServerConnectionImpl.init(ServerConnectionImpl.java:147)
at weblogic.deploy.api.spi.deploy.WebLogicDeploymentManagerImpl.getNewConnection(WebLogicDeploymentManagerImpl.java:148)
at weblogic.deploy.api.spi.deploy.WebLogicDeploymentManagerImpl.<init>(WebLogicDeploymentManagerImpl.java:118)
... 15 more
Caused by: java.io.IOException
at weblogic.management.remote.common.ClientProviderBase.makeConnection(ClientProviderBase.java:156)
at weblogic.management.remote.common.ClientProviderBase.newJMXConnector(ClientProviderBase.java:79)
at javax.management.remote.JMXConnectorFactory.newJMXConnector(JMXConnectorFactory.java:338)
at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:247)
at weblogic.deploy.api.spi.deploy.internal.ServerConnectionImpl.getMBeanServer(ServerConnectionImpl.java:240)
... 19 more
Caused by: javax.naming.CommunicationException [Root exception is java.net.ConnectException: t3s://127.0.0.1:7002: Destination unreachable; nested exception is:
java.net.ConnectException: Connection refused: connect; No available router to destination]
at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:40)
at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLInitialContextFactoryDelegate.java:783)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:365)
at weblogic.jndi.Environment.getContext(Environment.java:315)
at weblogic.jndi.Environment.getContext(Environment.java:285)
at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.InitialContext.<init>(InitialContext.java:197)
at weblogic.management.remote.common.ClientProviderBase.makeConnection(ClientProviderBase.java:143)
... 23 more
Caused by: java.net.ConnectException: t3s://127.0.0.1:7002: Destination unreachable; nested exception is:
java.net.ConnectException: Connection refused: connect; No available router to destination
at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:203)
at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:153)
at weblogic.jndi.WLInitialContextFactoryDelegate$1.run(WLInitialContextFactoryDelegate.java:344)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:339)
... 31 more
Caused by: java.rmi.ConnectException: Destination unreachable; nested exception is:
java.net.ConnectException: Connection refused: connect; No available router to destination
at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:464)
at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:315)
at weblogic.rjvm.RJVMManager.findOrCreateRemoteInternal(RJVMManager.java:251)
at weblogic.rjvm.RJVMManager.findOrCreate(RJVMManager.java:194)
at weblogic.rjvm.RJVMFinder.findOrCreateRemoteServer(RJVMFinder.java:225)
at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:188)
... 36 more
#### Cannot run application Sample1 due to error deploying to DefaultServer.
Application Sample1 stopped and undeployed from Server Instance DefaultServer
And on status bar the following message is shown:
Failed to start application in server instance
Please assist me with exact solution.
Please help me I am doing my final year project using this tool.And I am geting furstrated due to this problem.
Please reply quick!!
Edited by: [email protected] on Feb 22, 2009 10:53 PM -
Unable to stop Windows Server Backup
WSE2012. Backup regularly hangs while trying to back up one of our server disks to an external usb drive. Both source and destination drives check out ok - no fragmentation, disk errors, plenty of free space. Tried to Stop the backup gracefully
via the UI by right-mouse clicking the server listed in Dashboard>Devices tab and choosing Stop backup... but this is unable to stop it.
Tried to stop the block level backup engine service exe (wbengine.exe) but it appears to be orphaned and unkillable.
Task Manager shows wbengine.exe is running, so I've tried doing these things from an elevated command prompt:
1. wbadmin stop job -- this returns The process could not be terminated. There is no running instance of the task.
2. TASKKILL /F /IM wbengine.exe - same error message as above.
Short of rebooting the machine or unplugging the usb drive (which sometimes works but leads to data corruption), how can the backup be stopped and restarted?Mandy,
Thank you but no such luck. We're running Windows Server 2012 Essentials and we don't have 3rd-party software running on the server except for BackupAssist. We started with wbadmin, have moved to trying BackupAssist (BA), now am working with
their support team. Latest suggestion is to go back to native Windows Server Backup. But I have seen this issue before we installed BA. I will wait until we duplicate the problem there before responding here again, but my best solution is
to either unplug the backup drive (forcing a cancellation) or reboot the server. This has really got us baffled. -
Hi All
When I am starting up the server form Windows mmc console ,It goes up for while ,and then turns off .
First Woker processes in WP table ends and then dispatcher stops .Here is the developer trace for dispatcher
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid ERT
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 111
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 3164
Mon Apr 14 08:40:36 2008
kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3164) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 111 successfully loaded
shared lib "dw_xtc.dll" version 111 successfully loaded
shared lib "dw_stl.dll" version 111 successfully loaded
shared lib "dw_gui.dll" version 111 successfully loaded
shared lib "dw_mdm.dll" version 111 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Mon Apr 14 08:40:40 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5361]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >TLcSapOraG02_ERT_00 <
DpShMCreate: sizeof(wp_adm) 19248 (1480)
DpShMCreate: sizeof(tm_adm) 5584592 (27784)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000F1F0050, size: 6275136)
DpShMCreate: allocated sys_adm at 000000000F1F0050
DpShMCreate: allocated wp_adm at 000000000F1F2150
DpShMCreate: allocated tm_adm_list at 000000000F1F6C80
DpShMCreate: allocated tm_adm at 000000000F1F6CE0
DpShMCreate: allocated wp_ca_adm at 000000000F74A3B0
DpShMCreate: allocated appc_ca_adm at 000000000F750170
DpShMCreate: allocated comm_adm at 000000000F7520B0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F7D8D40
DpShMCreate: allocated gw_adm at 000000000F7D8DC0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F7D8DF0
DpShMCreate: allocated wall_adm at 000000000F7D8E00
MBUF state OFF
DpCommInitTable: init table for 500 entries
Mon Apr 14 08:40:41 2008
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
Mon Apr 14 08:40:42 2008
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1629]
Mon Apr 14 08:40:43 2008
***LOG Q0K=> DpMsAttach, mscon ( TLcSapOraG02) [dpxxdisp.c 11753]
DpStartStopMsg: send start message (myname is >TLcSapOraG02_ERT_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Mon Apr 14 08:40:44 2008
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 111
Release check o.K.
Mon Apr 14 08:41:23 2008
ERROR => W0 (pid 3416) died [dpxxdisp.c 14441]
ERROR => W1 (pid 3424) died [dpxxdisp.c 14441]
ERROR => W2 (pid 3432) died [dpxxdisp.c 14441]
ERROR => W3 (pid 3440) died [dpxxdisp.c 14441]
ERROR => W4 (pid 3448) died [dpxxdisp.c 14441]
ERROR => W5 (pid 3456) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W6 (pid 3464) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W7 (pid 3472) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W8 (pid 3480) died [dpxxdisp.c 14441]
ERROR => W9 (pid 3488) died [dpxxdisp.c 14441]
ERROR => W10 (pid 3496) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W11 (pid 3504) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W12 (pid 3512) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=529
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 14 08:41:33 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Apr 14 14:41:33 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3416 Ended no 1 0 0
1 DIA 3424 Ended no 1 0 0
2 DIA 3432 Ended no 1 0 0
3 DIA 3440 Ended no 1 0 0
4 DIA 3448 Ended no 1 0 0
5 DIA 3456 Ended no 1 0 0
6 UPD 3464 Ended no 1 0 0
7 ENQ 3472 Ended no 1 0 0
8 BTC 3480 Ended no 1 0 0
9 BTC 3488 Ended no 1 0 0
10 BTC 3496 Ended no 1 0 0
11 SPO 3504 Ended no 1 0 0
12 UP2 3512 Ended no 1 0 0
Dispatcher Queue Statistics Mon Apr 14 14:41:33 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
Dump of tm_adm structure: Mon Apr 14 14:41:33 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Apr 14 14:41:33 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=529
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 14 08:41:38 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >TLcSapOraG02_ERT_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (3400) (SOFT_KILL)
Stop icman
killing process (3408) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:3400 HANDLE:496)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=529
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 14 08:41:39 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:3400 HANDLE:496)
wait for end of icman
[DpProcDied] Process lives (PID:3408 HANDLE:504)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=529
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 14 08:41:40 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3408 HANDLE:504)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=529
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 14 08:41:41 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3408 HANDLE:504)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=529
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 14 08:41:42 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3408 HANDLE:504)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=529
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 14 08:41:43 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3408 HANDLE:504)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=529
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 14 08:41:44 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3408 HANDLE:504)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=529
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 14 08:41:45 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3408 HANDLE:504)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=529
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 14 08:41:46 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3408 HANDLE:504)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=529
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 14 08:41:47 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3408 HANDLE:504)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=529
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 14 08:41:48 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3408 HANDLE:504)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=529
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 14 08:41:49 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3408 HANDLE:504)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=529
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 14 08:41:50 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:3408 HANDLE:504)
DpStartStopMsg: send stop message (myname is >TLcSapOraG02_ERT_00 <)
NiIMyHostName: hostname = 'TLcSapOraG02'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Mon Apr 14 08:41:51 2008
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12099]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 436 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 436 (pos=2)
SiSelNRemove: removed sock 436
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 436
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 3164) [dpxxdisp.c 10371]
Good Bye .....trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Mon Apr 14 10:57:55 2008
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\ERT\DVEBMGS00\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\ERT\DVEBMGS00\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\ERT\DVEBMGS00\exe\dboraslib.dll' is "700.08", patchlevel (0.107)
B New connection 0 created
M sysno 00
M sid ERT
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 111
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 2616
M
M kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2616) [dpxxdisp.c 1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M
M Mon Apr 14 10:57:56 2008
M DpShMCreate: sizeof(wp_adm) 19248 (1480)
M DpShMCreate: sizeof(tm_adm) 5584592 (27784)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm) 552080 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1864)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000F1F0050, size: 6275136)
M DpShMCreate: allocated sys_adm at 000000000F1F0050
M DpShMCreate: allocated wp_adm at 000000000F1F2150
M DpShMCreate: allocated tm_adm_list at 000000000F1F6C80
M DpShMCreate: allocated tm_adm at 000000000F1F6CE0
M DpShMCreate: allocated wp_ca_adm at 000000000F74A3B0
M DpShMCreate: allocated appc_ca_adm at 000000000F750170
M DpShMCreate: allocated comm_adm at 000000000F7520B0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000000F7D8D40
M DpShMCreate: allocated gw_adm at 000000000F7D8DC0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000F7D8DF0
M DpShMCreate: allocated wall_adm at 000000000F7D8E00
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Mon Apr 14 10:57:57 2008
M ThInit: running on host TLcSapOraG02
M calling db_connect ...
C Prepending D:\usr\sap\ERT\DVEBMGS00\exe to Path.
C
C Mon Apr 14 10:57:58 2008
C Oracle Client Version: '10.2.0.2.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@ERT on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0000000015D900C0 000000000AB7EAF0 00000000081DF048
C Attaching to DB Server ERT (con_hdl=0,svchp=00000000081DEF08,srvhp=0000000015DB4C68)
C
C Mon Apr 14 10:58:00 2008
C *** ERROR => OCI-call 'OCIServerAttach' failed with rc=12541
[dboci.c 4313]
C *** ERROR => CONNECT failed with sql error '12541'
[dbsloci.c 11042]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@ERT on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0000000015D900C0 000000000AB7EAF0 00000000081DF048
C Detaching from DB Server (con_hdl=0,svchp=00000000081DEF08,srvhp=0000000015DB4C68)
C Attaching to DB Server ERT (con_hdl=0,svchp=00000000081DEF08,srvhp=0000000015DB4C68)
C
C Mon Apr 14 10:58:01 2008
C *** ERROR => OCI-call 'OCIServerAttach' failed with rc=12541
[dboci.c 4313]
C *** ERROR => CONNECT failed with sql error '12541'
[dbsloci.c 11042]
B ***LOG BY2=> sql error 12541 performing CON [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY0=> ORA-12541: TNS:no listener [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY2=> sql error 12541 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> ORA-12541: TNS:no listener [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1426]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10283]
M
M Info for wp 0
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M req.vm = no VM
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server TLcSapOraG02_ERT_00 on host TLcSapOraG02 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Mon Apr 14 10:58:01 2008
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10486
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2616) [dpnttool.c 327] -
Unable to connect the server, while open the rpt file in server from java.
Hi,
I have written one java class, that class deployed in solaris server. The BO server is avilable in another solaris server. i want to convert the rpt file to pdf format. for that i try to give the file path to the server for opening the rpt file, that time i got the follwoing error:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException:
Unable to connect to the server: uinbrdcsap02. --- Connection refused
(errno:239)---- Error code:-2147217387 Error code name:connectServer
at
com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException.throwR
eportSDKServerException(Unknown Source)
at
com.crystaldecisions.proxy.remoteagent.TCPIPCommunicationAdapter.connect
(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.z.a(Unknown Source)
at
com.crystaldecisions.sdk.occa.report.application.ReportAppSession.int(Un
known Source)
at
com.crystaldecisions.sdk.occa.report.application.ReportAppSession.initia
lize(Unknown Source)
*My java code is the following ..*
package com.ramco.report;
//Crystal Java Reporting Component (JRC) imports.
import java.io.File;
import java.io.FileInputStream;
import java.io.ByteArrayInputStream;
import java.io.FileOutputStream;
import java.io.IOException;
import java.io.ByteArrayOutputStream;
import java.sql.Connection;
import java.sql.CallableStatement;
import java.sql.Statement;
import java.sql.ResultSet;
import java.sql.SQLException;
import java.text.SimpleDateFormat;
import com.crystaldecisions.sdk.occa.report.exportoptions.ReportExportFormat;
import com.crystaldecisions.sdk.occa.report.exportoptions.ExportOptions;
import java.util.Calendar;
import java.util.Properties;
import org.apache.log4j.Logger;
import org.apache.log4j.SimpleLayout;
import org.apache.log4j.FileAppender;
import java.net.InetAddress;
import java.net.UnknownHostException;
// Class file starting.
public class StandardReconReport
private Connection objConnection = null;
private DBConnection dbconnection = null;
private ByteArrayInputStream byteArrayInputStream =null;
private FileOutputStream fileOutputStream = null;
private ByteArrayOutputStream byteArrayOutputStream = null;
private CallableStatement callablestatement = null;
private CallableStatement callablestatement1 = null;
private ResultSet resultset1 = null;
private ResultSet resultset = null;
private String Deal_No = null;
private String Job_Date = null;
private String Reportservername = null;
private SimpleLayout layout = null;
private FileAppender appender = null;
private Logger logger = null;
private String DateTimeFormat = null;
private String Report_File_path =null;
private String Pdf_File_Name = null;
private Properties properties = null;
private String LogFilePath = null;
private String FileName = null;
private String FullLogFilePath = null;
private Statement statement = null;
private String Report_upload_path = null;
private String StanReconDir = null;
private String winandsol = null;
private com.crystaldecisions.sdk.occa.report.application.ReportClientDocument reportClientDoc = null;
private int count_tmp=0;
private String DATE_FORMAT = null;
private String dateformat = null;
private Calendar cal = null;
private SimpleDateFormat sdf = null;
private String reconfilename = null;
// Method for Generating Report.....
private void stanReportGeneration()
try
properties = new Properties();
properties.clear();
properties.load(new FileInputStream("GeneralInfo.properties"));
Reportservername = properties.getProperty("reportservername");
reconfilename = properties.getProperty("reconfilename");
layout = new SimpleLayout();
LogFilePath = properties.getProperty("logfilepath");
dateformat = dateTime1(properties.getProperty("dateformat1"));
StanReconDir = properties.getProperty("stanrecondir");
winandsol = properties.getProperty("windowsandsolaris");
if (new File(LogFilePath).exists())
LogFilePath = LogFilePathdateformatwinandsol;
if (new File(LogFilePath).exists())
else
new File(LogFilePath).mkdirs();
FileName = "STANRECONLOGFILE-";
FileName = FileNamedateformat".txt";
FullLogFilePath = LogFilePath+FileName;
appender = new FileAppender(layout,FullLogFilePath,false);
logger = Logger.getLogger("MyLogger");
logger.addAppender(appender);
DateTimeFormat = properties.getProperty("datetimeformat");
logger.info("The Start Recon Report Start Time: " +dateTime(DateTimeFormat));
logger.info("");
try
InetAddress address[] = InetAddress.getAllByName(Reportservername);
for (int i=0; i<address.length;i++)
logger.info("Report Server Name: " + address<i>.getHostName());
logger.info("Report Server Address: " + address<i>.getHostAddress());
logger.info("Report Server Canonical: " + address<i>.getCanonicalHostName());
catch (UnknownHostException e)
logger.error("The host "Reportservername"is not avilable");
Report_File_path = properties.getProperty("StandardReconReportpath");
logger.info("The Report File Name is : "+Report_File_path " - "dateTime(DateTimeFormat));
//Report_File_path="rassdk://"+Report_File_path;
try
//Getting the Database connection....
dbconnection = new DBConnection();
objConnection = dbconnection.getConnections();
statement = objConnection.createStatement();
String sqlQuery = "SELECT TRIM(PARAM_VALUE) FROM SYS_USER_PARAM WHERE COMPONENT = 'REPORT' AND LINE_NO = 1 AND PARAM_NAME = 'REPORT_DOWNLOADPATH' AND STATUS = 'A'";
resultset = statement.executeQuery(sqlQuery);
while(resultset.next())
Report_upload_path = resultset.getString(1);
logger.info("Report_upload_path from the DB: "+Report_upload_path);
catch (SQLException ex)
ex.printStackTrace();
System.out.println(ex);
logger.error(ex);
catch(Exception ex)
ex.printStackTrace();
System.out.println(ex);
logger.error(ex);
finally
if(statement!=null)
statement.close();
if(resultset!=null)
resultset.close();
if (new File(Report_upload_path).exists())
Report_upload_path = Report_upload_path+StanReconDir;
if (new File(Report_upload_path).exists())
System.out.println("Directory is avilable"+Report_upload_path);
else
new File(Report_upload_path).mkdirs();
Report_upload_path = Report_upload_pathwinandsoldateformat+winandsol;
if (new File(Report_upload_path).exists())
else
new File(Report_upload_path).mkdirs();
logger.info("Report_upload_path : "Report_upload_path" : "+dateTime(DateTimeFormat));
try
logger.info("Calling the REPORT_STAN_RECON_CON SP : "+dateTime(DateTimeFormat));
callablestatement = objConnection.prepareCall("{call REPORT_STAN_RECON_CON(?)}");
callablestatement.registerOutParameter(1, oracle.jdbc.driver.OracleTypes.CURSOR);
callablestatement.execute();
resultset=(ResultSet)callablestatement.getObject(1);
if(resultset!=null)
while(resultset.next())
count_tmp = count_tmp+1;
logger.info("");
Deal_No = resultset.getString(1);
Job_Date = resultset.getString(2);
DATE_FORMAT = resultset.getString(3);
Job_Date = Job_Date.substring(0,10);
logger.info("*********** PDF Convertion Starting for a Deal No: " +Deal_No " :: "dateTime(DateTimeFormat));
Pdf_File_Name = Report_upload_pathreconfilenameDeal_No"-"DATE_FORMAT+".pdf";
Job_Date = Job_Date.replace('-', '/');
logger.info("The Deal_No is : "+Deal_No " - "dateTime(DateTimeFormat));
logger.info("The Job_Date is : "+Job_Date " - "dateTime(DateTimeFormat));
try
reportClientDoc = new com.crystaldecisions.sdk.occa.report.application.ReportClientDocument();
reportClientDoc.setReportAppServer(Reportservername);
logger.info("Report App server Name := "+ reportClientDoc.getReportAppServer());
logger.info("Report_File_path := "+ Report_File_path);
reportClientDoc.preCreateServerAgent(true);
reportClientDoc.open(Report_File_path,0);
logger.info("After opening the RTF file for : "+Deal_No " Deal_No - "dateTime(DateTimeFormat));
callablestatement1 = objConnection.prepareCall("{call REPORT_STANDARD_RECON(?,?,?,?)}");
callablestatement1.setString(1, Job_Date);
callablestatement1.setString(2, Deal_No);
callablestatement1.setString(3,"");
callablestatement1.registerOutParameter(4, oracle.jdbc.driver.OracleTypes.CURSOR);
callablestatement1.execute();
resultset1=(ResultSet)callablestatement1.getObject(4);
String tableAlias = reportClientDoc.getDatabaseController().getDatabase().getTables().getTable(0).getAlias();
reportClientDoc.refreshReportDocument();
reportClientDoc.getDatabaseController().setDataSource(resultset1, tableAlias , "Result Set");
reportClientDoc.refreshReportDocument();
ExportOptions oExportOptions = new ExportOptions();
oExportOptions.setExportFormatType(ReportExportFormat.RTF);
byteArrayInputStream = (ByteArrayInputStream)reportClientDoc.getPrintOutputController().export(ReportExportFormat.PDF);
logger.info("After exporting the report file to PDF file for the : "+Deal_No " Deal_No - "dateTime(DateTimeFormat));
//Use the Java I/O libraries to write the exported content to the file system.
byte byteArray[] = new byte[byteArrayInputStream.available()];
//Create a new file that will contain the exported result.
logger.info("Successfully exported report to " + Report_File_path" - "dateTime(DateTimeFormat));
logger.info("*********** PDF Convertion Ending for a Deal : "Deal_No" "+dateTime(DateTimeFormat));
logger.info("");
Deal_No = null;
Job_Date = null;
catch (SQLException ex)
ex.printStackTrace();
System.out.println(ex);
logger.error(ex);
catch (IOException ex)
ex.printStackTrace();
System.out.println(ex);
logger.error(ex);
catch (Exception ex)
ex.printStackTrace();
System.out.println(ex);
logger.error(ex);
finally
if(byteArrayInputStream!=null)
byteArrayInputStream.close();
if(byteArrayOutputStream!=null)
byteArrayOutputStream.close();
if(fileOutputStream!=null)
fileOutputStream.close();
if(callablestatement1!=null)
callablestatement1.close();
if(resultset1!=null)
resultset1.close();
if(reportClientDoc!=null)
reportClientDoc.close();
if(count_tmp==0)
logger.info("");
logger.info(" $$$$$$$$ There is NO DATA for generating the Report $$$$$$$: " +dateTime(DateTimeFormat));
catch (SQLException ex)
ex.printStackTrace();
System.out.println(ex);
logger.error(ex);
catch (Exception ex)
ex.printStackTrace();
System.out.println(ex);
logger.error(ex);
finally
if(callablestatement!=null)
callablestatement.close();
if(resultset!=null)
resultset.close();
if(objConnection!=null)
objConnection.close();
if(callablestatement1!=null)
callablestatement1.close();
if(resultset1!=null)
resultset1.close();
catch (IOException ex)
ex.printStackTrace();
System.out.println(ex);
logger.error(ex);
catch (Exception ex)
ex.printStackTrace();
System.out.println(ex);
logger.error(ex);
finally
properties.clear();
logger.info("");
logger.info("*******Standard Recon Report End Time*******: "+dateTime(DateTimeFormat));
// Getting the current date and time..
public String dateTime(String dateFormat)
cal = Calendar.getInstance();
sdf = new SimpleDateFormat(dateFormat);
return sdf.format(cal.getTime());
//Getting the Yesterday Date and time...
public String dateTime1(String dateFormat)
cal = Calendar.getInstance();
cal.add(Calendar.DATE, -1);
sdf = new SimpleDateFormat(dateFormat);
return sdf.format(cal.getTime());
public static void main(String[] args) {
StandardReconReport SR = new StandardReconReport();
SR.stanReportGeneration();
For the above code i given the report parameter from the property file.
reportservername=servername
datagenreportpath=rassdk\://C\:
MyEclipseWorkPlace
IDSREPORTGENERATION
REPORTFILES
STANDARD_RECON_REPORT.rpt
The code is working fin, while i try to connect the BO which is avilble in Windows server, but this is not working if the BO is avilble in solaris server.
Any bodies please help
Edited by: velmurugan.spn on Sep 12, 2009 6:38 AMHi,
Not able to find Report - Standard templates or Report - Custom templates view in Administration - BIP reports in Siebel 8.1.1.3?
We have applied 8.1.1.3 patch on 8.1.1.0
below are the steps followed
Reports are not generated after 8.1.1.3 patch installtion.
we have also followed to below steps mentioned for this issue in oracle support.
"In order to resolve this behavior it is necessary to ensure that the 8.1.1.3 FixPack has been applied to the Siebel Tools installation. This will provide an additional .zip file in the REPPATCH folder of the Siebel Tools installation. Once this has been done please then follow the configuration steps as documented :
change sysprefix to X_ before sif import and chage back to SBL_ after sif import.
1) Import the sif files from Siebel\8.1\Tools_1\REPPATCH\12-1VMBCSV.zip
2) Import the 4 SIF files in the following order:
S_XMLP_REP_TMPL_02112010.sif
SBL_XMLP_REPORT_SELECTION_FLG.sif
Report Template BC.sif
Report Template Registration Applet.sif
3)Apply the DDL for table S_XMLP_REP_TMPL and compile repository
Once the above steps have been completed the Selected Record flag will appear in the Report Template Registration views."
we still not able to generated able to generate reports even after following above steps.
Thanks
Sean -
Unable to stop the alarm in Nokia 5233
Hi ,
I am using Nokia 5233 for past 3 months. I am facing a problem while using the Alarm.
When the alarm generated, i am unable to stop it. When i pressed the close button its going into SNOOZE mode but not into stop mode.
This is happening when my mobiles is locked.
Is there anyway to stop the alarm, eventhough the mobile is locked.
Thanks,
Srikanth.Make sure that it did not end up being added as a the Keynote Soundtrack +(Documents>Audio Tab)+. If it is the soundtrack, it will play throughout the Keynote, if it is just added to a slide, it should stop when you change slides.
-
PageMethod response returning whole page, unable to debug the server side method
Hello Guys,
I am unable to debug my method written on server side when a call is send to it through jquery using page method.
In response , I get the whole page.
code:
ASPX page:
PageMethods.MyMethod(p1, p2, function(response){
ASPX.CS
[System.Web.Services.WebMethod()]
[System.Web.Script.Services.ScriptMethod()]
publicstaticstringMyMethod(stringp1,
stringp2){
//Updating database
I did ScriptModule entry in web.config, enabled tracing,have ScriptManager and EnablePageMethods is set to true.
Still the server side method is not getting called.
please help.
Ng_TechFreakHi Ng_TechFreak,
For ASP.NET questions please post in
ASP.NET forum where you'll get better help.
Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
OBIEE 11g SSL Configuration Issue : Unable to import the Server certs
Hello All,
We are trying to configure OBIEE 11.1.1.6.0 with SSL using Windows server 2003 (IIS) and facing some issues with that.
Followed the document : OBIEE11g SSL Setup and Configuration [1326781.1]
http://obieedue.blogspot.sg/2012/08/obiee11g-ssl-setup-and-configuration.html
and also completed generating the required certificate signing request and keystores for SSL communication and sent it to the CA (IT Admin team) to to have the certificate signed by CA. The issue comes when I am trying to import the CA certificate (Root certificate) and Server Certificate into the Java Keystore.
I am importing the Root CA Certificate first which is successfully added to the keystore.
keytool -import -trustcacerts -alias mycacert -file cacert.pem -keystore mykeystore.jks -storepass Welcome1
Trust this certificate? [no]: yes
Certificate was added to keystore.
But when trying to add the Server Certificate to the keystore using the command below :
keytool -import -v -alias testserver -file server.cer -keystore mykeystore.jks -keypass Welcome1 -storepass Welcome1
Certificate reply was installed in keystore
I get the following error:
keytool error: java.lang.Exception: Failed to establish chain from reply
java.lang.Exception: Failed to establish chain from reply
at sun.security.tools.KeyTool.establishCertChain(KeyTool.java:2662)
at sun.security.tools.KeyTool.installReply(KeyTool.java:1870)
at sun.security.tools.KeyTool.doCommands(KeyTool.java:807)
at sun.security.tools.KeyTool.run(KeyTool.java:172)
at sun.security.tools.KeyTool.main(KeyTool.java:166)
Read many forums and tried to convert it to the PKCS#7 format and import the cert to the identity keystore, but was not successful in that either. I have also checked with the IT Admin team and found there is only one RootCA and no other intermediate CA's.
Please advice if any one has similar issues or suggestions.
Thanks in advance,
SVSHi,
One obvious reason would be that you did not specify -trustcacerts, and the root CA is not included in the present server keystore. In that case, using the -trustcacerts option would solve the problem, if the root CA is indeed in the JDK cacerts.
To print out the certificates present in the JDK cacerts, use the following command:
keytool -list -keystore <JAVA_HOME>/jre/lib/security/cacerts -storepass changeit -v
Then check if the root CA that signed your server certificate is present, and has not expired (in which case,you would need to re-import a newer one into cacerts).
Another common reason for that error message is when you have used a proprietary CA to sign your server certificate. Then it would obviously not be in the JDK cacerts. The solution in that case is to import your proprietary root CA into the JDK cacerts, using the following command:
keytool -import -keystore <JAVA_HOME>/jre/lib/security/cacerts -file yourRootCA.pem -storepass changeit -alias youralias
A third reason for that error message is when your server was signed by an intermediate certificate. In that case, you would have received from your CA a chain of certificates. One way to solve this (not the only one, but this one works well): Prepend your intermediate CA file to your server cert file, and import the obtained concatenated file into the server keystore. Be careful, the intermediate CA must be BEFORE the server cert. Example:
copy rootca.cer certchain.p7b
type server.cer >> certchain.p7b
The file certchain.p7b will be the concatenation of the intermediate CA and the signed server cert. Then import the newly created file under the key alias as follows:
keytool -import -keystore serverks.jks -file certchain.p7b -alias yourkey -trustcacerts
If you only prepend the intermediate root CA, you must make sure the the final root CA is in cacerts. But you can also prepend your whole chain of trust inside the server keystore.
Regards,
Kal
Maybe you are looking for
-
After moving to iCloud, the emails (3 family users) became mixed. All devices (ipad, iphone and imac) are all identified under my name while one family member utilizes the iphone, one the ipad while all three use the imac. As administrator (or what
-
How to use Crystal Report in JDeveloper
Hi all, I'm a JDeveloper fresher. To day, i want to use Crystal Report 2008 in JDeveloper. Please support to me: how to setup, config Crystal Report to use with JDeveloper. share to me your demo if you have. Thanks!
-
IOS8.1.1 - Delete photos from your iPhone.
I want to delete photos from iPhone 5s iOS8 but I want to keep them in my iPhoto. Any suggestions?
-
I am a newb at this program and i want to know how to set the beginning scene. when i make "scene 2" and ctrl+enter, it starts with scene 2 instead of scene 1. Scene 1 is the index (home) of the site I'm making. I couldn't find anything about this in
-
Install files for Photoshop CS2 & Acrobat Pro 7.0
I recently lost my install disks for these two programs during a move. I had a backup of the install files (.dmg) for both but accidentally deleted the folder because I ran out of space on my backup drive. I was hoping someone could point me in the r