Unable to Stream After ATV Update???

So i updated, as you do.
After the update was complete, add shared iTunes library in Computers section.
Punched in my code, only 2 tabs come up in iTunes for the device,Summary,and Photos.
Go back to the ATV and try to connect to my library (which i can see and is not grayed out).
It won't connect, it displays: "ATV is connected to library for streaming. To see its content, choose shared movies, shared TV shows, shared music, shared podcast, or shared photo's in the main menu"
Go back to the main menu in iTunes (this is the main menu its talking about, right??) and as i said above the only tabs displayed for that device is Summary and Photo's.
I have tried selecting photo's to stream in that tab menu, as it asked me to do, clicked apply and still it comes up with that message on the ATV.
I can't work it out!!! Any idea's??
Thanks for your help everyone.

The streaming is different now in new version. That message you said you saw just says, you don't stream from there anymore. Just go back to your menu (music, video, photos, etc) and then there is a submenu item (or right) for "Shared xxx" When you pick that, it will show all the connected iTunes computers that are up. There you pick which one to go to. So to stream, you just go to the "Shared xxx" option in any menu for content. You don't have to go access it via computers like before.

Similar Messages

Unable to Reboot After Software Update - Unable to Reinstall Mac OS 10.4.10

Hello,
I just bought a Macmini 9 months ago, and I believe I may need to either erase the HD to reinstall the original Mac OS (10.4.10) or else replace it. However, I am not familiar with Mac and don't know how to reformat the disk. Can anyone help?
Each time there is a software update, I experience problems starting up from the HD. After the last update a few days ago, I am unable to start up from the HD at all. I tried using the original install CD 1 to reinstall Mac OS 10.4.10 with archiving. However, I received an error saying "unable to install because there is a newer version already installed." Therefore, I tried to start up from the HD again by pressing Option key at startup, but the Macmini continously turned off by itself without rebooting. I tried reinstalling Mac OS with the erase option, but it failed. After that, the Mac OS install CD1 only gives me the option to reinstall additional applications, but when I select continue, there is not HD shown to install the applications.
Disk Utility First Aid on CD1 was unable to repair the disk. I received the following messages: "Invalid sibling link", "Volume check failed", "The underlying task reported failure on exit", "1 HFS volume checked", "1 volume could not be repaired because of an error."
At the bottom of the page under Disk Utility, the following information about the disk is available. Format: Mac OS Extended (Journaled); Capacity: 111.5 GB (119,690,149,888 Bytes); Available: - ; Used: - ; Number of Files: - ; Owners Enabled: - ; Number of Folders: - .
System Profiler is able to identify type, disk identifier, file system, etc. It shows the volume supports journaling, but is not journaled.
Scan Image for Restore shows Library_Preferences (Empty), and Root applications are all grayed out.
I performed the Apple Hardware Test (ver 3A129) by pressing D at startup. The test ran for 5 minutes and 6 seconds. It reported "No trouble found".
It seems the HD is empty, but the install CD is not offering any options to reinstall the OS, only the additional applications. I believe it is a partition error, but I am not familiar with Mac and hesitate to proceed any further.
How do I reformat the disk so that I can reinstall the original Mac OS 10.4 and 10.5?
Your help is sincerely appreciated. Thanks.

Good news!
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.
I only use Software Update to see what is needed, then get them for real via...
http://www.apple.com/support/downloads/
That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.

Unable to restart after software update 10.3.1.1779

I am unable to get my Z10 to restart after this update.
I have searched endless avenues and have now resorted to deleteing the notifcations for this update when they come in, I have downloaded and installed it, but when asked to restart, my phone stalls on the loading screen forever, the longest I have waited for it to restart is 3 days, with 24 hours of that on 99%.
I am now the but of all phone related jokes as everyone I know has an IPHONE that works perfectly, but I insist on keeping this awful Z10 becuse I dont want to join their rank....too tink I spent £500 on this when it came out (more fool me)
It would seem that the general consensus is, I will have to go to the inconveience of taking my Z10 in to a phone shop, were they will send it off to BB for the update to be installed.
PS; Blacberry's forum is as hard to navigate as the phone is to actually get working proberly.

This has been the worst software update I have ever encountered. My Q10 is completely unreliable and I am going to switch to another device in the morning. I have restored factory settings and have successfully wiped the app to sync my shared Google Calendars, the z and y keys have swapped on my keypad and the Q10 still turns itself off arbitrarily, wipes all text and phone messages and can't recall what network I'm on or what my home wifi settings are.

Netflix not working properly after ATV update

After the update, movies at netflix after some seconds, video starts from the beginning and audio still plays normal.
Can't see anything like that. Have to fast forward so video comes back to original point.
Can you guys help me out?

If the update does not work for you then do as I explained in my previous post and roll back to the previous driver. That philosophy can be applied to all updates.
If there is no pressing or emergent reason to update and your PC or notebook is running just great... don't update. (that is especially true when it comes to a BIOS update)
For your issue #2, the problem could be your wireless connection (hotspot, router or modem) that causes the dropped connection.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Photo streaming screen saver not working after ATV update

I was using a shared photo streaming album as a screen saver prior to the update. Now, with all options on, it only shows one generic "photo stream" option with zero photos in the file. I have a total of five photo stream ablbus that used to appear as choices.
Any ideas?

Thanks to Apple Care, problem solved. I'm one of those people that have two user names and passwords with Apple. When Mobile Me closed, my ICloud username became the old Mobile Me username. I also have my ITunes username and password.
So, to load content from ITunes, I have to be logged in as that user, but to access my Photo Stream, I have to be logged in as my ICloud user.

Black screen mirroring after ATV update

hi, I need help, I just bought my ATV, and it mirrored my IPad just fine, then it asked me to update the ATV software, now it just give me sound but no mirror??? Only a black screen. Help please!

I have the same problem. After restarting the iPad, mirroring will work for 2 or 3 times and then after that I get a black screen on the TV.
It is not a router issue because my iPhone and MCP all work fine sending to ATV repeatedly. It's just the iPad that is having this issue, the one place I really need the capability.
I've tried everything suggested on other threads with this topic. The only thing that works is rebooting the iPad, but the problem crops up after 2-3 uses. I really need to be able to turn mirroring on/off repeatedly like I can on other devices.

Unable to restore after Android Update

Hi all,
After updating my Z1 to 4.4.2 I was unable to restore using the built in backup and restore app. The error message states that the selected backup cannot be used due to incompatability of the software!!!!
This should have been obvious to sony....
Also, opening the backup folder in the SD card is of no use since the files were encrypted.
Will any good soul help me restore or at least retrieve my files?
Thank you!

You cannot restore the backup from JB to KK...You should have backed up on google servers,I think from there you could have restored easily.Try this link for the contacts:
http://talk.sonymobile.com/t5/Xperia-S-SL-acro-S/How-can-I-extract-contacts-from-dbk-file-on-my-comp...
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

T430s unable to restart after Windows Update

I'll start with the short version. I just got my ThinkPad T430s, so there were a lot of Windows Updates to install. After one batch, I am no longer able to restart the machine. When I click Shut Down, Restart or Log Out, the desktop disappears, but instead of bringing up the "Shutting Down..." screen, it just shows the desktop background indefinitely until I power down by holding the power button. I have been unable to figure out what is causing this, how to fix it, or which Windows Update was the cause.
Longer version:
I upgraded my machine from Windows 7 Home to Pro. After a series of Updates the problem started. I tried a lot of things, then decided to try reinstalling Windows. Again, it happened after a large chunk of Windows Updates. I have tried a million things. System Restore points don't fix it. "Clean Boot" doesn't fix it. Uninstalling Windows Updates doesn't fix it. Eventually I tried to use the Lenovo recovery CD, but it turns out the recovery partition only contains one of the 4 CDs you use. You don't find this out until you get an error that says "You have inserted the wrong disk" which occurs AFTER the recovery software has wiped all your partitions. So now my recovery partition is gone as well. My current plan is to install Windows fresh to hold me over until Lenovo can ship me the full set of recovery CDs, but if anyone has any ideas for what might be causing this no restart problem, I would appreciate it.

kb2647753 seems to be the problem child.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

Creative CLoud products unable to run after CC update

Hi all
I have a problem with Lightroom and Photoshop CS6 and CC. After updating to Photoshop CC yesterday none of the products would run. System is Mac OS Lion. Photoshop(both CC and CS6) comes up with this message:
Configuration error
A problem has occured with the licensing of this product. Restart your computer and re-launch the product.
If this problem still occurs after restarting, contact Customer Support for further assistance, and mention the error code shown at the bottom of this screen.
Error: 213:4
http://www.adobe.com/support/
Lightroom doesn´t run either, prompting me for a license key, and my Creative Cloud licence key is not accepted.
I have tried logging in and out of Creative Cloud, reinstalled Application manager, reinstalled Photoshop and repaired disk permissions, which were all ok.
I am a bit stuck here, with clients waiting for me to deliver photos, so I would appreciate any help.
Thanks in advance
Dag

bkmvl, Are facing this error while launching CS6 apps or CC apps?
Make sure you have permission on the required folders and you have followed this article completely. http://helpx.adobe.com/x-productkb/policy-pricing/configuration-error- cs5.html
I would recommend performing the below suggestions for your Win 7 pc.
Turn off User Account Control : http://helpx.adobe.com/x-productkb/global/disable-user-account-control-uac.html
Create local administrator account | Windows 7, Vista -http://helpx.adobe.com/x-productkb/global/create-local-administrator-account-windows.html
Restart Windows in a modified mode | Windows 7, Vista - http://helpx.adobe.com/x-productkb/global/restart-windows-modified-mode-windows.html
Check if any of that error helps.

Unable to restart after software update

the last 2 times that i have installed "restartable" updates from the "software update" option i have been unable to start my computer without having to boot from my Snow Leopard install disc and reinstall it. has anyone else come upon this issue?
when it goes to reboot, it loads like normal but the grey apple turns into a crossed out circle. like a no smoking sign minus the cigarette. haha
anyway, any help would be much appreciated!

BryanWassy wrote:
the last 2 times that i have installed "restartable" updates from the "software update" option i have been unable to start my computer without having to boot from my Snow Leopard install disc and reinstall it. has anyone else come upon this issue?
I haven't had that problem myself, but the next time you're led to reinstall Mac OS X, once you pass the language selection screen you should see a "Utilities" menu bar item that will let you run Disk Utility. Do that and invoke "Repair Disk" and "Repair Permissions", then see if you're able to boot from your internal disk.

Windows 7 Home Premium 64 bit unable to launch after latest update

After installing the latest Firefox update to my Windows 7 Home Premium 64 bit on my home theater computer, I am no longer able to launch Windows.

Hi there,
That seems extreme? Could you please be more specific and tell us what exactly happens when it stops booting, if you get any errors/warnings and whether you installed something rather strange lately?
Regards,
Ziggy

Unable to login after system update

I recently installed arch in my lenova laptop. Installation went fine and I updated my system then. Finally I had a kernel 3.4.4-2 and rebooted.
After rebooting, I got the login screen (tty1) . I had not created an user yet. So had to login as root.
So When I enter the username as root and click enter , the password credential request is not getting loaded. After a space of 10 seconds, I am again redirected to login request.
I have never had this issue and I have been using arch for the past 8 months. Please advice

I am still stuck. The other thread that I mentioned was dicussing about adding hook to mkinitcpio because /usr was in a separate partition. That is not the case in my problem.
I rushed to close this thread before resolving my issue. the issue is still persisting. I could not login to the machine at all. And my partitions are as listed below
sda1 - /
sda5 - /home
sda6 - /opt
sda7 - /var/cache
sda8 - swapspace
Again, I couldnot login once after updating the system. I could login before. Please advice

Unable to boot after MobileMe update

I just yesterday activated my .Mac (MobileMe) account. In the process, System Update wanted to install a recent update, as well as the .Mac --> MobileMe update. After letting it install, my system would no longer boot, even with the left-shift (safe mode) boot. I tried numerous times, including using the command-V key to see the text. Unfortunately, I was not able to read the boot text because the system would auto-power off shortly after the CPU halted. Booting from the CD, and running Disk Utility showed no problems with the disk. I had to do a complete OS reinstall to get running again. After that, I reapplied all the updates, except the final MobileMe one (which I'm scared to apply now!), and I'm back up and running.
My question is, do you think that was just a fluke, and I should go ahead and install the MobileMe update anyway? Or keep avoiding the update? Anyone have a similar experience?

Yeah, it was a fluke, something about your system wasn't right (had you ever repaired your permissions?).
Since you already bypassed any method of repair that might have been able to help salvage your OS, there's really no reason that you shouldn't go ahead and install every update offered by System Update.
Push it to the Max with a fresh install. Just make sure to repair your permissions after the big system updates. With a fresh install you've got nothing to lose. Find out there are problems with an installation before you invest a lot of time with it.
You might consider a full Time Machine backup so that you can restore without having to do all of the updates again.
Your other option would be to ignore the MobileMe service entirely as your only chance of getting it to work properly will be if you do get the fixes for this very buggy service.

Unable to print after adobe update

Program says "printer must be installed before printing pdf" but printer is installed, updatd and working properly with other programs. I did a system restore (windows XP) and was able to print pef but as soon as update re-installed I was unable to print. Obvious solution is to system retore again and NOT update adobe but is there a better fix?

Hi,
I found that Adobe has released an update to Acrobat 9.4.2 for the Print Issue in the form of an EXE. I applied the fix on my system, and it seems to have fixed it.
You can download the EXE from:
http://kb2.adobe.com/cps/891/cpsid_89178/attachments/AcrobatPatchApplication.exe
For more information on the same, please refer:
http://kb2.adobe.com/cps/891/cpsid_89178.html (Herein, refer to Solution 1)
Regards
Ankit

Another "Unable to restart after intel update" (6/3/08)

anyway, ran the update - no dice - grey screen...grey apple
took someone's advice, ran the starup disk after trying cntl-v and cntrl-s (which just gave me a list of errors before restarting), so now i'm running the disk utility and it threw up "invalid node structure" at me followed immediately by "rebuilding catalog b-tree," then followed by ton of "invalid node structure" and the progression bar hasn't budged at this point
ok - just got "first aid failed" - then - "volume could not be repaired because of an error"
that's bad, right?
Message was edited by: JtotheF

The errors are most likely in the files not in the hardware, especially since this happened when you were doing a medium serious OS update. Once you are finished with the drive you can erase it and use it again. I think there is a write zeros option which will scan the hard disk for physical problems and will tell you if there are other issues. New hard disks also have SMART capability which is supposed to report impending failures (physical I believe, not in directory which is the problem you are having).
I don't have any hands-on experience with DW in terms of telling you how long it will take. That would depend upon your computer speed, the size of the drive and the number of errors.

Unable to Stream After ATV Update???

Similar Messages

Maybe you are looking for