Unable to stream Channel 4 live

This service is completely unwatcheable. Long pauses and regular message saying 'insufficient bandwidth'
According to speedtest.net my connection has 32ms ping and 50M+ download speed.
Using Chrome Version 25.0.1364.97 with no addons or ad blockers.
Also when I go to the MyBT site, pages take 60-90 seconds to load.
Apart from BT and Channel 4, everything else seems fine.
Anyone got any ideas ?
Thanks

Others have reported Channel 4 buffering issues, you're not alone. MyBT can be slow from time to time. 

Similar Messages

  • Unable to stream live radio

    I have a MacBook laptop and I'm currently unable to stream live radio to it. It had been working. My tech updated it and now it won't stream.
    Is there a setting some place that I need to set to get it going again?
    Thanks much!
    Ginger

    Maybe someone else know of a quick fix, not me unfortunaley, it is also a while since I used 10.6.8.
    At least the audio system works correctly.
    Few more questions.
    Do you have any extentions in Safari preferences, such as Ad block, Flash block etc, these can stop streaming working? I cannot remember if these extentions were available for Snow Leopard.
    Did you use a Proxy server in your network settings that as been disabled by the software upgrade, or have they set one up for you in network settings to use the school network?
    Do use a particular station, if so what is it and I will try it on my computer. It may give some pointers to what is stopping on your computer.
    and I should have asked this before, can you steam radio from other locations, say at home etc.

  • No Packages for Streaming Channels only?

    I have FIOS Internet service only and have ditched the Verizon Router almost 2 years ago.  At the time, the provided routers did not provide Gigabit ports and the wireless was not great IMO.  I have no desire to reconnect this router or watch live TV on a regular basis.  Got rid of DirecTV and use Netflix and HuluPlus for TV content.  On the rare occasion I wanted to watch AMC for Walking Dead as it played live, I wanted to use the FIOS App on my XBox 360 and XBox One.  I was told I needed to subscribe to one of the full TV packages to get any of the streaming channels.  Maybe I'm the minority here, but feel Verizon is missing out on a subscriber base.
    Any ideas?

    WilliamIII wrote:
    I have FIOS Internet service only and have ditched the Verizon Router almost 2 years ago.  At the time, the provided routers did not provide Gigabit ports and the wireless was not great IMO.  I have no desire to reconnect this router or watch live TV on a regular basis.  Got rid of DirecTV and use Netflix and HuluPlus for TV content.  On the rare occasion I wanted to watch AMC for Walking Dead as it played live, I wanted to use the FIOS App on my XBox 360 and XBox One.  I was told I needed to subscribe to one of the full TV packages to get any of the streaming channels.  Maybe I'm the minority here, but feel Verizon is missing out on a subscriber base.
    Any ideas?
    A lot of your content providers with channels who offer streaming media through their websites or apps require a subscription from a cable provider, it's not just a Fios thing. Because of contracts with cable providers to carry the channels they aren't just going to allow you to watch their content without paying for some kind of subscription.
    Hulu, Netflix, etc. run their own paid subscription services which is why you can view their content however you want, but if you want to watch cable shows outside of those services that aren't on them, you are going to have to subscribe elsewhere.
    You can get local channel streaming such as ABC, CBS, etc. for free through their apps, but if it's a cable channel one way or another you're going to pay if you want what's offered.

  • Unable to Stream Audio

    I'm unable to stream audio from a popular radio station. My old Win XP and Vista systems had no trouble. The radio station's site indicates that Windows Media Player is necessary. I'm hesitant to install anything having to do with Microsoft and/or Windows. What do I need to know? What are the pros/cons of installing Windows Media Player? Is there an Apple-approved version of WMP? Are there any other options available to me?

    Hi iTunesKruzr
    Some radio stations will play in Safari and other OS X browsers and some will not without a wmp?
    Download and install Flip4Mac first to see if that doesn't let you listen to you favorite station?
    http://www.apple.com/downloads/macosx/video/flip4macwindowsmediacomponentsforqui cktime.html
    Dennis

  • I am unable to stream Netflix to my Iphone or Apple TV, from my wireless router . . . even though I am able to watch Netflix on my WII (also wireless) and desktop computer (not wireless).

    I am unable to stream Netflix to my Iphone or Apple TV, from my wireless router . . . even though I am able to watch Netflix on my WII (also wireless) and desktop computer (not wireless).
    On the Iphone and Apple TV I can connect to Netflix . . . it recognizes me and my account settings . . . and I can veiw all my recent programs and show titles, descriptions, etc..  But when I select one to watch I get a message saying:
    "ERROR A PROBLEM OCCURED WHILE PLAYING THIS ITEM. TRY AGAIN LATER, OR SELECT A DIFFERENT ITEM. GO TO WWW.NETFLIX.COM/SUPPORT FOR MORE INFORMATION. (139)
    Netflix support say there is nothing wrong on their end . . . that it is an Apple issue.  They see the request for the show, the devices are registered . . . but it shows 0 bandwidth to the device.
    My Apple TV did this when I first hooked it up a couple of weeks ago.  Then after a few days started working with Netflix, for no apparent change . . . now doesn't again for the past couple of days (I think that it auto restarted the other night after a virus scan).
    Very frustrating, and driving me nuts!  Has anyone else had and been able to resolve this problem?

    Troubleshooting
    Apple TV2 update one day and netflix is browsing but not launching the actual content (error 139)
    Ipad2 (another ios device) forces me to update netflix if I want to use it and I get the same error 139 on it.
    **** now I have two not ways not working where prior to some update it was fine.
    Nintendo Wii is still working ( mind you running an ancient version of netflix )  Dusted the Wii off and gave it to the kids use.  Now they are happy again...
    PC is also still working ( using some other flash client ) but that's just of interest, we're not going to be watching tv with that.
    My wife's iphone 4s is still working.  Odd.. still ios but for somereason I am not forced to update the version. So basically she could mirror stream up to the apple tv with it.  Nice feature of Ios5.  Later found out it is using 1.4 version of netflix.  The most useful thing out of that is that all 3 of the devices are Ios and it was actually the iphone with the 1.4 version of netflix that still worked!
    I heard from a friend who was on a different ISP he was still working so I took my appletv2 and ipad2 over to my brothers house who is on that same ISP as my friend and both started working.  So the ISP is involved too!
    Brought the appletv2 and ipad2 back to my house hoping it would maybe still work.  No dice   Broken again.
    Searched the appstore for a decent packet analyzer and there isn't really anything.  I was able to sniff the traffic with my PC and also on my juniper ssg5 confirmed that.  Turns out port 80 traffic is actually failing and authorization is not happening.  The other clients do not do this...
    Asked a buddy from work who used to work at the ISP if he could make a call to some one who might actually know what is going on.  He came back pretty quick and said yea they are trying really hard to get the beta patch in from Bluecoat asap. 
    So knowing that it was actually Netflix that changed when it hit 2.0 and in my case the ISP made the adjustment it's pretty safe to say this issue is going to be ongoing unless netflix changes again the way they authorize for licenses.
    So that's the summary of what went right down the troubleshooting path but I'll tell what what didn't
    2 calls to Netflix (useless... waste of time... they are too quick to blame anyone but themselves)
    1 call to apple support (support call was going to cost more than it cost for me to change ISPs)
    2 calls to ISP (through the normal means - regular support number)
    So why is this intermittantly working sometimes?  If you are lucky enough to authorize to an IP address that is not cached they voila you are going to get an authorization / a license to watch the show.  Some people report after defribulating their appletv (reseting, rebooting, dns changes, you name it) they get it working.  Over the past month we all seem to have got it working for some period of time only to lose it a day to two later.
    It's now been several days since the beta patch to the bluecoat and 4 of us who have been communicating on the issue appear to be online all at the same time for those several days and that is a good sign that we might be out of the woods on the issue.
    Hope this turns into something helpful for someone else out there.

  • Unable to stream videos on macbook pro

        im unable to stream videos on macbook pro. need help

    I was unable stream videos from youtube and unable to play music from pandora. I was dowloading the incorrect flashplayer. I found flashplayer for mac and it worked. Thank you for your response :)

  • I subscribe to Acorn TV. I am unable to stream their videos. I have no problem with Hulu, iTunes, Netflix. I have spoken with Acorn and have tried Firefox, Chrome and Safari, but nothing works. I am using a MacBook OS 10.6.8 and Firefox 3.6.12

    I am a premium subscriber to AcornTV. I have been unable to stream video on my home MacBook Pro (OS 10.6.8) using Firefox 3.6.12. I can easily stream Hulu, iTunes, Netflix, etc, but NOT AcornTV. I have tried the AcornTV player on Safari, Chrome and Firefox, nothing works. I use Time Warner High Speed internet at home, and they claim the problem is on Acorn's end, which Acorn denies. The biggest frustration is that I CAN stream Acorn videos on my office iMac desktop, using the same OS and same version of Firefox (we have our own server at work, though).

    I'm watching it right now on Firexfox, but it's on a Dell, not a Mac. Have you tired watching it on a Chrome or IE browser instead of Firefox? And does it work on those browsers?
    You should continue to follow up with Acorn TV - email [email protected] and you will get help, from the CTO, if necessary. Also, they now have a diagnostic page built that can analyze your computer and it will give them more information about your system. So, if you haven't tried in two months, it might be worth trying again.

  • Unable to create new windows live id......the mess...

    i m unable to create new windows live id.
    the message have been shown that"your phone have too many windows live id,cant create new one..contact your senrvice provider" 
    i stolen my nokia music id password...so what can i do???????????????????

    mallar wrote:
    i m unable to create new windows live id.
    the message have been shown that"your phone have too many windows live id,cant create new one..contact your senrvice provider" 
    i stolen my nokia music id password...so what can i do???????????????????
    why would you steal your music id password? ..nokia id / account is different from windows live id btw.
    maybe you already have a windows live account, thats why its showing the that problem. check settings > email+accounts > you should ideally have only one(1) 'microsoft account' in there. if you want to use another one, you might want to just 'change' the existing one with your new credentials.

  • Unable to stream movies after 4.2.1 update

    Hi,
    I updated my Apple TV to 4.2.1 tonight and I've been unable to stream movies from my iMac or iPad to the ATV since then. I can stream music and TV shows but no luck streaming movies to it.
    I've also tried streaming from my iPad to the ATV and this isnt working either.
    The iMac and iPad see recognize the ATV, the ATV displays one still picture and sits in a buffering pattern.
    I tried restoring the ATV, rebooting my iMac, rebooted the TC and APE but no luck.
    Have you run across this? Any suggestions? (besides not updating right away!)

    I spoke (wrote) too soon. Though the calendar is showing all the events, an event I just added on the iphone has not shown up on other devices. I created an event on my Ipad too, which also didn't show up on other devices.
    I logged in to Mobile Me, which reports all services running OK, but something seems to be wrong

  • Unable to find channel ID at inbound SOAP Adapter

    Hi experts,
    I encountered a very puzzling problem:
    I have a scenario:
    IDOC -> XI -> SOAP
    For 2 interfaces of such nature, 1 works fine, 1 doesn't.
    The one that does not work is throwing the following error in RWB - Message Display Tool (MDT):
    2007-03-22 10:57:05 Success The message was successfully received by the messaging system. Profile: XI URL: http://ootspdbs02:50100/MessagingSystem/receive/AFW/XI
    2007-03-22 10:57:05 Success Using connection AFW. Trying to put the message into the receive queue.
    2007-03-22 10:57:06 Success Message successfully put into the queue.
    2007-03-22 10:57:06 Success The message was successfully retrieved from the receive queue.
    2007-03-22 10:57:06 Success The message status set to DLNG.
    <b>2007-03-22 10:57:06 Error Unable to find channel ID
    2007-03-22 10:57:06 Error Delivery of the message to the application using connection AFW failed, due to: Couldn't find delivery channel for message: a277e57c-c837-e44f-9ae2-da0d701980c4. </b>
    2007-03-22 10:57:06 Success The asynchronous message was successfully scheduled to be delivered at Thu Mar 22 10:58:06 SGT 2007.
    2007-03-22 10:57:06 Success The message status set to WAIT.
    In SXMB_MONI, it shows the message has been processed successfully - indicating that the mapping is fine. Status = Awaiting acknowledgement.
    I've looked up the forums, and the general solution offered is to refresh the SLD cache.
    I've tried that, but it doesn't work.
    Please help.
    Thanks.
    Ron

    > hmm.. then things not a problem with the cache.
    > Is the error in MONI? Or is it in the Adapter Engine?
    >
    >
    > I know it isrepeatitive, but checking if the Objects
    > are all active and correct in the ID is the only
    > solution I can suggest.
    >
    > Regards
    > Bhavesh
    In the MONI, the status is successful, awaiting acknowledgement.
    After sometime, the ack status will be "Acknowledgement contains System Errors"
    <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="OUTBINDING">CO_TXT_ROUTING_BACK_ERROR</SAP:Code>
      <SAP:P1>,BS_DEV1_NAUTICUS_OOTS</SAP:P1>
      <SAP:P2>,BS_NHGDDBS01,,</SAP:P2>
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error occurred during back-routing Error in communication channel</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
    But I don't think these are related, because the message wasn't sent out, naturally there's an error in the ack.

  • BlazeDS with WAS 6.1 streaming channel killing the server?

    Hi,
    We are experiencing a strange issue with WAS (websphere server) 6.1 with BlazeDS
    after a while severe performance degrades and then system hungs shortly after
    Some prelimenary observations:
    we are seeing following errors in Server Log:
    [6/22/10 16:41:26:828 EDT] 000000b0 ThreadMonitor W   WSVR0605W: Thread "WebContainer : 3-in-streaming-mode" (0000002a) has been active for 656127 milliseconds and may be hung.  There is/are 1 thread(s) in total in the server that may be hung.
    [6/22/10 16:48:00:144 EDT] 000000b1 ThreadMonitor W   WSVR0605W: Thread "WebContainer : 0" (00000027) has been active for 753457 milliseconds and may be hung.  There is/are 2 thread(s) in total in the server that may be hung.
    We do see that there is always one active connection maintained betweeb browser and server(which is connected to ):
    messagebroker/streamingamf
    and  that keeps sending keep-alive signals , now is this a reason we are getting hung messages? can we safely ingore it?
    basically can streaming chanell cause that error? and what would be suggestions tweaks/modifications to fix that issue?
    our destination config :
    <destination id="alerts-Push-jms" >
            <properties>
                <jms>
                    <destination-type>Topic</destination-type>
                    <message-type>javax.jms.TextMessage</message-type>
                    <connection-factory>jms/***JMSTopicConnectionFactory</connection-factory>
                    <destination-jndi-name>jms/AlertEventingTopic</destination-jndi-name>
                    <delivery-mode>PERSISTENT</delivery-mode>
                    <message-priority>DEFAULT_PRIORITY</message-priority>
                    <preserve-jms-headers>"true"</preserve-jms-headers>
                    <acknowledge-mode>AUTO_ACKNOWLEDGE</acknowledge-mode>
                    <max-producers>1</max-producers>
                </jms>
            </properties>
            <adapter ref="jms" />
        <channels>
            <channel ref="my-streaming-amf" />
        </channels>
        </destination>

    Actually we did not fix it from WAS perspective, but what we did is ditched a blazeds streaming channel in favor of polling channel,
    that solved the issue.
    it appears that WAS has issues with connections that are Held open for a long time.

  • Transactions "unable to find channel"

    Hello,
    I have made two test channels on my server - but doing a "rug channels" on
    my clients gives a "No channels available" message (and performing a
    transaction fails, giving an "unable to find channel" message).
    I followed instructions in the ZLM Admin docs while setting up, the clients
    both work fine with red-carpet.ximian.com, I was able to add the service
    for my local ZLM server fine, and they both activated fine with a test
    activation key I made, but for some reason they can't see any channels on
    this server.
    I'm at a bit of a loss troubleshooting the problem - can't figure out what
    I might have missed! Any suggestions? (I'm using ZW6.5 on SLES8-SP3, with 2
    clients: SLES9 and SuSE-Pro-9.1).
    Many thanks for any help,
    Karl

    Kpodesta,
    It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
    - Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
    - You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
    If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • XI - Unable to find channel ID

    Hello,
    I am trying to post a message via HTPP and I get the error message
    Message Data - Error category: XI_J2EE_ADAPTER_ENGINE
    Message Data - Error code: CHANNEL_DETERMINATION_FAILED
    Audit Log - Error: Unable to find channel ID
    Audit Log - Error: Delivery of the message to the application using connection AFW failed, due to: Couldn't find delivery channel for message:
    Could you help me on this topic, please?
    Thanks in advance for your answer,
    Vincent,

    Hi Vincent,
    Here are a couple of suggestions which normally works.
    I guess you should check your receiver agreement, i.e your receiver channel.
    RWB --> Component monitoring --> Adapter monitoring --> your receiver channel (it should be green).
    If it is not, then thats where the problem lies.
    Also there is a nice link for Problem Analysis Guide, which tells you the approach to take to analyse a problem,
    http://help.sap.com/saphelp_nw04/helpdata/en/6c/7ffb3f6c78ee28e10000000a1550b0/frameset.htm
    Also check your Pipeline URL in SLD.
    Business System ->Click On -> Pipe Line URL
    It should be
    http://Server:port/sap/xi/engine?type=entry
    Second, Go to SICF Transaction in XI, and activate the service sap/xi/engine
    For more
    Transmitting message to entry pipeline failed !!
    https://websmp103.sap-ag.de/~sapdownload/011000358700002757652005E/HowtoMintorAF.pdf
    Also Double check your port(for the second URL). It should be the HTTP port listed when you go to txn SMICM then Goto->Services. The port you have there looks like the J2EE port.
    If nothing works, Just try to restart AFW and AFxxx services (from Visual Admin)
    Steps to restart AFW and AFxxx services are:
    Start the Visual Admin tool. Connect to your XI J2EE Engine (640).
    Go to Server->Services.
    Try to restart such services as "SAP XI AF Messaging", "SAP XI AF Core", "SAP XI Adapter: XI", etc.
    Regards,
    Abhy
    Message was edited by: Abhy Thomas

  • Error: Unable to find channel ID

    Hello,
    I have an scenario R/3 - XI - Mail in GEN, the same scenario was working perfectly in GED but after transporting it to GEN it does not work.
    In the adapter monitoring I can see the following error: 'Unable to find channel ID'. Does anybody know the reason of this error?
    Thanks in advanced,
    Luis.

    hi,
    - check if all directory objects are tranported to new landscape!
    - activate communication channel once more
    - refresh CPA cache
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

  • Unable to find channel ID - using Test Message in RWB

    Hey all - we are using the Test Message tab of the RWB, and we get "Unable to find channel ID" as the response to our message being sent.  We are clueless what this means... since this is supposed to send straight into the engine, I'd expect something like "no interface determination" or sometimes similar - but we can't figure out what this error means.  This is the message we get, regardless of payload or interface chosen...  We even chose an interface that has already been tested & is running successfully into XI via the JMS adapter, so we know the actual path thru XI is valid. 
    Help is appreciated - I'm sure this is something silly we don't have set up that we need...

    We were hitting the Test tab after clicking the AF in RWB - you should choose the engine... it likes that much better. 

Maybe you are looking for