Unable to successfully set up my WVC200 to view remotely.

Hi everyone,
This is somewhat of a long story so please bare with me. I've had my WVC200 for a number of years and for the last year (at least) its been stored in a bag in my closet. The camera was bought to monitor my grandmother after she fell down the stairs, I set it up originally and had no problems connecting via VLC to view (I'm an OSX user and at the time this was the only way that I know of to view the feed). I'd set up a DynDNS address and forward the camera port (1024) and all was well. My Grandmothers health improved and the camera was taken down.
Two weeks ago her knees gave out and she's still in hospital recovering. I decided to re-install the camera ready for when she comes home (tomorrow). I'm sat here in my Grandmothers living room after 7 hours of battling with the camera. I give in.. this is my last attempt before it gets thrown out the window.
I've started from scratch and had to buy a new router, I bought a Netgear DGN1000 as the old Netgear died. I set up the camera with a static IP (192.168.0.200) subnet 255.255.255.0 and gateway 192.168.0.1. I entered the primary and secondary DNS address taken from my routers status screen.
I've changed the video format to MJPEG and set up a couple of user accounts, changed the default port for the camera to 8181 and ensured the 'Alt port' option is ticked.
created a new DynDNS (nancam.******.net) and have a old PC upstairs using the DynDNS software to keep the IP upto date (I've tried using the DYNDNS feature on the router but stayed with the PC software as it had worked in the past).
The Netgear port forwarding options are a little different with the option to create a service (I created WVC200 and opened port 8181) then using another tab names Firewall rules I pointed the WVC200 service to the address of the camera 192.168.0.200.
internally the camera works fine. I can access it via Safari 192.168.0.200:8181 and via the 'Linksys Cam' app on my iphone4 based on the same info (plus a user and pass). It even works internally via my Dns address with the port both on Safari and 'Linksys Cam'.
However, the moment I try from another network (my home broadband and 3G on the iPhone) I'm out of luck.
When I enter my DNS from another network in a browser it prompts for the USR/PASS so I know it's routing through to the camera okay but once I've entered the User and password the server times out and no page is loaded. same with 'Linksys Cam' it just comes back saying no video is being received from the address.
I've been at it today for several hours starting from scratch with both the router and the camera a number of times. I've tried different ports both wired and wireless connections from the camera and always hit the same wall, it works internally on the same network as the camera but nothing once I've left the house.
I've come to the conclusion this camera is broken, I'm hoping one of you can tell me I'm wrong. I do like the camera and it was a real asset the first time round. With my Grandmother coming out tomorrow I'm feeling gutted I've been unable to get this working.
I've followed this guide and read page after page of threads both here and elsewhere. I'm rather IT literate and cant help thinking I'm simply missing something.
Hoping you guys can help.
Joe.

Joseph,
I can't help but think that the issue is router related. The only thing I might change in the camera is to change the primary DNS to 192.168.0.1, although I admit it is trivial. A few questions:
Can you access the router setup page remotely if you enable that?
Have you tried pinging the FQDN to find the IP, then enter that in your browser?
Have you tried MPEG instead of MJPEG?
It sounds like you are getting to the camera since it prompts you for the Username/Password. Once you authenticate something is stopping the video stream/webpage from loading properly. I would like to see if you can access the router remotely and start dropping security settings until you can access the camera. (Turn the firewall off if necessary for testing purposes.)
Please keep us updated.

Similar Messages

Attempting to set up IP camera to view remotely

Hi All! Firs time here... Been working on this problem all week with no result...
I have a westel 6100G modem bridged to a dlink 655 wireless router. I am attempting to install a Tenvis JPT3815W IP cam to remotely view from work. I have been successful in viewing through my LAN but not remotely.
I know I must do some port forwarding on the modem or router or both .I also think I'm supposed to have a static IP but have no idea for sure.
I guess I need someone experienced with doing this to walk me step by step through this. I appreciate any help anyone can give.
The cam is going to be used so that I can view the activity going on in our nonprofit educational organization while I'm on the road.
Thank you!

When yoi say bridged, you mean:
a) The RJ-45 WAN port of the dlink 655 is connected to the RJ-45 LAN port of the Westell
and
b) You followed http://www.dslreports.com/faq/13600
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Why can't FF successfully set itself as my default browser?

Firefox 3.6.10 is unable to successfully set itself as my default browser.
I'm running Win7/64 Enterprise SP1
FF is set to check itself on startup, and each time reports that it is not the default browser, do I wish to set it so? I say "yes", but am asked next time anyway.
If I then shut FF down immediately, then restart it, I am asked again.
FF has an option to "check now" whether it is the default, under the Tools->Options->General tab.
Clicking "Check Now" brings up that same dialogue.
I click "Check Now", am told FF is not the default, do I want to set it so? I answer "Yes", the dialogue is dismissed.
I then click "Check Now" again, and am again told that FF is not my default. (Yes, I am Administrator)
Under Default Programs, FF is designated to handle FTP, HTTP and HTTPS protocols, and to open .htm and .html filetypes.
As far as I can tell, FF acts as if it is the default browser. Why is its own check for same always coming up false?
What does FF '''really''' check, if not the protocols and file associations?
How can I make this stop?

I already was administrator and general sysgod of my computer.
I was provoked into trying related things at random, and here's what I came up with as a workaround:
If you go into Control Panel->Default Programs -> Set Program Access and Defaults, there are three radio-button options: Microsoft, Non-Microsoft, and Custom.
(Custom was already selected)
With the Mozilla Options->Advanced window open, check the "Set as default browser", then click the "Check Now" button. It will report that FF is not your default browser, etc. Ecce quaestio, and all that.
Back to "Set Program Access", click the "Non-Microsoft" button. Close it.
Back to FF, and try "Check Now" again. Now it says "FF is already your default browser".
Now RE-OPEN Control Panel and get back to "Set Program Access and Defaults". It's back to "Custom". But FF is apparently satisfied that it is the default now. Let's see if it stays that way.

Unable to use Set-TextMessagingAccount in exchange 2010

I unable to use Set-TextMessagingAccount in exchange 2010, tried both in sp2 and sp3 getting following error:
The operation couldn't be performed because object 'Aditya' couldn't be found on 'ex02.mydomain.com'.
+ CategoryInfo : NotSpecified: (0:Int32) [Set-TextMessagingAccount], ManagementObjectNotFoundException
+ FullyQualifiedErrorId : C6F712B7,Microsoft.Exchange.Management.StoreTasks.SetTextMessagingAccount"
Athoght i am able to use "Get-TextMessagingAccount Aditya" successfully with following output
RunspaceId : e57177d4-6bb2-450d-acce-d56e81df6a9b
Identity : mydomain/Users/Aditya Mendiratta
CountryRegionId :
MobileOperatorId : -1
NotificationPhoneNumber :
NotificationPhoneNumberVerified : False
EasEnabled : False
EasPhoneNumber :
MailboxOwnerId :
mydomain/Users/Aditya Mendiratta
IsValid : True
Please suggest
Aditya Mediratta

OK..this works only for currently logged in system account only. Say i logged in as administrator and use "Set-TextMessagingAccount" this would go any change i need to do on myself (administrator) by using "Set-TextMessagingAccount" but
its yet not able to modify TextMessagingAccount settings for any other users in organization from current administrator account even after adding the administrator to MyTextMessaging Role. Below is how i added administrator to MyTextMessaging Role . I get
the same error as stated in original query. Please suggest.
Adding Administrator account to MyTextMessaging ROLE:
[PS] C:\Windows\system32>New-ManagementRole -name "Text_Admins" -Parent "MyTextMessaging"
Name RoleType
Text_Admins MyTextMessaging
[PS] C:\Windows\system32>Get-ManagementRole "Text_Admins"
Name RoleType
Text_Admins MyTextMessaging
[PS] C:\Windows\system32>Get-ManagementRoleEntry "Text_Admins\*"
Name Role Parameters
Clear-TextMessagingAccount Text_Admins {Confirm, Debug, DomainController, ErrorAction, ErrorVariab...
Compare-TextMessagingVerifi... Text_Admins {Confirm, Debug, DomainController, ErrorAction, ErrorVariab...
Get-CalendarNotification Text_Admins {Credential, Debug, DomainController, ErrorAction, ErrorVar...
Get-Mailbox Text_Admins {Identity}
Get-TextMessagingAccount Text_Admins {Credential, Debug, DomainController, ErrorAction, ErrorVar...
New-InboxRule Text_Admins {Name, SendTextMessageNotificationTo}
Send-TextMessagingVerificat... Text_Admins {Confirm, Debug, DomainController, ErrorAction, ErrorVariab...
Set-CalendarNotification Text_Admins {CalendarUpdateNotification, CalendarUpdateSendDuringWorkHo...
Set-InboxRule Text_Admins {Identity, Mailbox, SendTextMessageNotificationTo}
Set-TextMessagingAccount Text_Admins {Confirm, CountryRegionId, Debug, DomainController, ErrorAc...
Set-UMMailbox Text_Admins {Identity, UMSMSNotificationOption}
[PS] C:\Windows\system32>New-RoleGroup "Text_admins_Rgrp" -Roles "Text_Admins" -Members administrator
Name DisplayName AssignedRoles RoleAssignments ManagedBy
Text_admins_Rgrp {Text_Admins} {Text_Admins-Text_ad... {mydomain.com/Users/Admi...
[PS] C:\Windows\system32>Get-RoleGroup "Text_admins_Rgrp" | FL
RunspaceId : 11e84709-8bcf-4777-8dd6-b018d1d2c5d3
ManagedBy : {mydomain.com/Users/Administrator, mydomain.com/Microsoft Exchange Security Groups/Organization Management}
RoleAssignments : {Text_Admins-Text_admins_Rgrp}
Roles : {Text_Admins}
DisplayName :
Members : {mydomain.com/Users/Administrator}
SamAccountName : Text_admins_Rgrp
Description :
RoleGroupType : Standard
LinkedGroup :
IsValid : True
ExchangeVersion : 0.10 (14.0.100.0)
Name : Text_admins_Rgrp
DistinguishedName : CN=Text_admins_Rgrp,OU=Microsoft Exchange Security Groups,DC=mydomain,DC=com
Identity : mydomain.com/Microsoft Exchange Security Groups/Text_admins_Rgrp
Guid : b50d3ed8-b8c2-4e9f-a3e9-b54350d3f645
ObjectCategory : mydomain.com/Configuration/Schema/Group
ObjectClass : {top, group}
WhenChanged : 2/7/2015 10:50:45 PM
WhenCreated : 2/7/2015 10:50:45 PM
WhenChangedUTC : 2/7/2015 5:20:45 PM
WhenCreatedUTC : 2/7/2015 5:20:45 PM
OrganizationId :
OriginatingServer : ex02.mydomain.com
Aditya Mediratta

I have a MacBook and I am unable to successfully update Firefox. I click "Update Firefox" and it's starts updating but never completes the process. I sometimes leave it for hours and it's still updating! Please help!

Question
I have a MacBook and I am unable to successfully update Firefox. I click "Update Firefox" and it's starts updating but never completes the process. I sometimes leave it for hours and it's still updating! It's almost as if something is blocking it ffrom completing the process. Please help

Next time an app update gets stuck try a reset. Press and hold both the home and power buttons for10-15 seconds till the Apple logo appears. Then release both buttons. Wait till your iPad starts on it's own. Try now. Also YouTube is still available. If you can't find it the the app store go to the bottom of the app store page and tap purchased. All your deleted apps will be listed and you can reinstall YouTube from there.

Blackberry Z10,post security wipe...BBM Not working..Showcasing error Unable to complete Set Up and Temporary Server Error"

I would request you to please help fixing the BBM error - Unable to complete Set Up and Temporary Server Error”.
I am using a BB Z10 with Software version 10.1.0.4181 and OS version 10.1.0.4633
Already tried resetting device to Factory Settings and Security Wipe...
Please help.

Hey KaranPrabhakar,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
Follow the steps in this KB article to resolve the issue: www.blackberry.com/btsc/KB33780
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Custom tag - unable to find setter method error

I see this compileException on IAS but not on BEA app server and iWS.
JSPProvider.processJSPFile(): jsp=searchContent.jsp, org.apache.jasper.compiler.CompileException
Unable to find setter method for attribute: input
The reason is because the custom tag has a setInput() that takes a String parameter while the getInput() returns an InputStream.
Should both get and set methods have the same type of parameters or is this a due to a bug in the app server ?

I see this compileException on IAS but not on BEA app
server and iWS.
JSPProvider.processJSPFile(): jsp=searchContent.jsp,
org.apache.jasper.compiler.CompileException
Unable to find setter method for attribute: input
The reason is because the custom tag has a setInput()
that takes a String parameter while the getInput()
returns an InputStream.
Should both get and set methods have the same type of
parameters or is this a due to a bug in the app server
I was only going off info from the original post. The error specifically states "Unable to find setter method for attribute: input" with a lower case i for the input attribute. You also specifcally stated "The reason is because the custom tag has a setInput()" with a capital I for the setInput method. This would most definitely cause the error you were receiving. That is unless you corrected this between your original post and your followup testing.
Cliff

I am unable to successfully download and apply any updates to my Apple TV. I have unplugged and restarted my Apple TV but I continue to get the "update unsuccessful" message. Any help would be appreciated.

I am unable to successfully download updates to my Apple TV. I am stuck on software 5.1. Am I going to just have to buy a new Apple TV or can Apple TV be repaired. Anybody know any tricks. I am connected to Internet with through a power line adapter. All of my other Internet based applications are working fine through this connection so I don't think the power line connection has any bearing on this failure to download and update.

Restore it using iTunes as described here:
http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US
AppleTV does not need a power lead when connected to the computer (AppleTV 3 will for part of the process).
AC

I recently purchased an airport extreme base station. I want to replace my older linksys wireless router. I had a successful set up but can not get it to talk to broadband modem, I am missing something but what?

I recently purchased an airport extreme to replace my older linksys wireless router. had a successful set up but can not get connected to the internet. for some reason, which I am sure is apparent to others, i am missing some needed info to connect to the dsl broadband modem that I have. would love some good tips.

Try this:
Turn off or remove power from the DSL model, the router, and your computer. Wait not less than one minute. Restore power to the modem and wait until the status lights indicate a connection to the ISP. Next, restore power to the router and wait until the status light shows connection to the modem. Last, turn on the computer. Check your Network preferences to be sure they are configured for a DHCP connection and that the router has received a valid IP address (not 169.xxx.xxx.xxx).

Has anyone successfully set up scan to smb to mac os 10.7.x from a Konica Minolta bizhub

Has anyone successfully set up scan to smb to mac os 10.7.x from a Konica Minolta bizhub. I'm using 10.7.3 on MacBook Pro. Don't care what model bizhub is being used as I have access to many. I've seen the posts for FTP workarounds but want to use SMB if that is an option. Any suggestions? Thank you!

petermtnbk wrote:
I've read other discussions that have suggested changing the format of the username and password when having login problems. I'm not familiar with NT-Status Codes. Could changing the format of the username make any difference? Something like... "workgroup/username" or "username@domain" or "domain/username" or some other combination of workgroup, domain, username, computername.
The issue has nothing to do with the format of the user authentication. What you are reading is about the Lion Mac connecting to a Windows computer that is part of domain or workgroup. The method changed slightly compared to Snow Leopard.
KM does support FTP so that is still an option, but I would ideally would like to set up SMB scanning. I'm not sure if KM is going to support AFP anytime soon.
With the lack of SMB support and KM offering no alternative at this stage then I suggest you look at using FTP. While Lion removed the option to enable FTP via the Sharing pane in System Preferences, it can still be enabled via Terminal using the following command
sudo -s launchctl load -w /System/Library/LaunchDaemons/ftp.plist
You will be prompted to authenticate using your Mac's admin account & password. Once this is done, you can then configure the address on the copier to push scan using FTP. The keys are;
The host name requires just the IP address. No leading slashes like SMB
The path will be the folder that you want to scan to, also entered without a leading slash. For example, Desktop
The user name will be the short name of the account who's folder you want to scan to.
The only other option may be WebDAV if the KM supports it. We have this with our imageRUNNER ADVANCE and with a document scanned to a shared folder in the copier hard drive, we can then connect to that folder by using Finder's > Go > Connect to Server facility. You then just enter
http://ipaddress/share
which connects you to the shared folder and lets you see the document you scanned. You also have the facility to set subfolders for security of users documents.

Unable to find setter method for attribute:

I am using Jboss jboss-4.2.3.GA, JDK 1.6.
I am trying to deploy our application on Jboss. When loading sources page or whenever we try to load the taglib we are getting the following error.
org.apache.jasper.JasperException: jspfile.jsp(67,1) Unable to find setter method for attribute: collection
at org.apache.jasper.compiler.DefaultErrorHandler.jspError(DefaultErrorHandler.java:40)
at org.apache.jasper.compiler.ErrorDispatcher.dispatch(ErrorDispatcher.java:407)
at org.apache.jasper.compiler.ErrorDispatcher.jspError(ErrorDispatcher.java:148)
at org.apache.jasper.compiler.Generator$GenerateVisitor.evaluateAttribute(Generator.java:2736)
at org.apache.jasper.compiler.Generator$GenerateVisitor.generateSetters(Generator.java:2965)
at org.apache.jasper.compiler.Generator$GenerateVisitor.generateCustomStart(Generator.java:2169)
at org.apache.jasper.compiler.Generator$GenerateVisitor.visit(Generator.java:1689)
at org.apache.jasper.compiler.Node$CustomTag.accept(Node.java:1507)
at org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2338)
at org.apache.jasper.compiler.Node$Visitor.visitBody(Node.java:2388)
at org.apache.jasper.compiler.Node$Visitor.visit(Node.java:2394)
at org.apache.jasper.compiler.Node$Root.accept(Node.java:489)
at org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2338)
at org.apache.jasper.compiler.Generator.generate(Generator.java:3374)
at org.apache.jasper.compiler.Compiler.generateJava(Compiler.java:210)
at org.apache.jasper.compiler.Compiler.compile(Compiler.java:306)
at org.apache.jasper.compiler.Compiler.compile(Compiler.java:286)
at org.apache.jasper.compiler.Compiler.compile(Compiler.java:273)
at org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:566)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:316)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:336)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:265)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:654)
at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:445)
at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:379)
at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:292)
at com.ssmb.common.servlets.GenericControllerServlet.service(GenericControllerServlet.java:639)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:182)
at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:524)
at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:157)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:262)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:446)
at java.lang.Thread.run(Thread.java:619)
The line corresponding in JSP file is ,
<ssmb:list name="src_" collection="sources" showAll='<%= "" + true %>'>
Please let me know if you have faced this issue before.

Have you written this tag in a tld or a tag file?
How have you declared the attribute "collection"?
Does the class which implements the custom tag <ssmb:list> have a method in it: public void setCollection(String collection) ?

Successfully set up TC (the latest one) for MBP. I can access to TC wirelessly. Tried to access from my PC too but PC does not even detect TC (as storage), while PC is connected in the same network and can access to the internet. Anything missed?

Successfully set up TC (the latest one) for MBP. I can access to TC wirelessly. Tried to access from my PC too but PC does not even detect TC (as storage), while PC is connected in the same network and can access to the internet. Anything missed?

Load the airport utility for windows.. it has several parts.. the key one is bonjour for windows which helps windows find apple network devices.
The TC should also be setup with names that windows can use.. ie short, no spaces and pure alphanumeric.
So Fred Blog's Airport Time Capsule
Is not a valid windows name.
TCgen5 is.

Unable to find setter method

Hi,
Can anyone tell me how to overcome the error
/tags/DBConnectionTest.jsp(8,0) Unable to find setter method for attribute: connection
I get this error when i try to test a custom tag through a jsp. My jsp for testing the custom tag(s) is like this
DBConnectionTest.jsp
<%@ taglib uri="http://www.bidla.com/db-taglib" prefix="db" %>
<db:connection id="conn" url="jdbc:odbc:bidla2">
     <db:userId>apj100</db:userId>
     <db:password>amithpj</db:password>
</db:connection>
<db:query id="getAllRows" connection="conn">Select name from events</db:query>
I think there is some problem with the query tag because the jsp runs fine if i remove the line containing query tag. The query tag represents QueryTagHandler.java. Is there anything extra that i need to add to it.
Waiting for reply,
Thank You !

I am having the same problem.
In my jsp I have:
<db:query id="eventsForDay" connection="conn">
SELECT name, description, start_date FROM Events
WHERE EXTRACT(MONTH FROM start_date) = <%= month%>
AND EXTRACT(YEAR FROM start_date) = <%= year%>
AND EXTRACT(DAY FROM start_date) = <%= day%>
ORDER BY EXTRACT(HOUR FROM start_date), EXTRACT(MINUTE FROM start_date)
</db:query>
My .tld file contains:
<tag>
<name>query</name>
<tagclass>station.auction.db.taglib.QueryTagHandler</tagclass>
<teiclass>station.auction.db.taglib.QueryTagExtraInfo</teiclass>
<bodycontent>JSP</bodycontent>
<info>Specifies a SQL query</info>
<attribute>
<name>id</name>
<required>true</required>
</attribute>
<attribute>
<name>connection</name>
<required>true</required>
</attribute>
</tag>
And the handler is :
public class QueryTagHandler extends BodyTagSupport {
     private Connection con=null;
private String id=null;
private String test=null;
public int doAfterBody() throws JspException {
     try {
          String query = getBodyContent().getString();
          System.out.println("[QueryTagHandler] doAfterBody, Query Body-> " + getBodyContent().getString());
          Statement stmt = getConnection().createStatement();
          ResultSet rs = stmt.executeQuery(query);
          this.pageContext.setAttribute(getId(), rs, pageContext.PAGE_SCOPE);
     } catch (Exception exc) {
          throw new JspException(exc.getMessage());
     return SKIP_BODY;
public Connection getConnection() {
     return this.con;
public void setConnection(String connection)
     this.con = (Connection)pageContext.findAttribute(connection);
//System.out.println("[QueryTagHandler] setConnection, Attribute-> " + connection);
     //System.out.println("[QueryTagHandler] Connection : " + con);
The error is : Unable to find setter method for attribute : connection
What could be the problem ?????!!!!!!! I've googled for 2 days continuously and - no answer ... Can anyone help ?

"We were unable to complete set up online."

'm not eligible for an upgrade, but my mom is, so I was going to use her upgrade. I still can't get passed "We were unable to complete set up online." Is it because my mom doesn't have an iPhone already? I tried it with my sister's number who does have an iPhone and it worked fine. Then I tried it with my number and I have an iPhone too and it worked just fine. Anyone else? Will this get fixed?

Twosertaz wrote:
'm not eligible for an upgrade, but my mom is, so I was going to use her upgrade. I still can't get passed "We were unable to complete set up online." *Is it because my mom doesn't have an iPhone already?* I tried it with my sister's number who does have an iPhone and it worked fine. Then I tried it with my number and I have an iPhone too and it worked just fine. Anyone else? Will this get fixed?
If your mom line is eligible for an upgrade, it does not matter if she had a previous iphone or not. Keep on trying to connect. It took me over 2 hours yesterday to connect.

I have iCloud successfully set up my Mac and iPhone iPad. Mac will not transfer to my other devices. Other devices transfer successfully. I have checked my iCloud setting on my Mac, but cannot see a problem. Can you help me?

I have iCloud successfully set up my Mac and iPhone iPad. Mac will not transfer to my other devices. Other devices transfer successfully. I have checked my iCloud setting on my Mac, but cannot see a problem. Can you help me?

If you have iTunes 11 on your computer then you can enable the left-hand sidebar on it via option-command-S on a Mac, control-S on a PC - when connected (and if your computer's iTunes is up-to-date) your iPad should then appear on that sidebar under a 'Devices' heading :
If you select the iPad on that sidebar you can then use the Movies tab on the right-hand side of the iTunes screen to select and sync that film to your iPad's Videos app.
Has your iPad been synced to the computer before ? If not then you might find this page for syncing to a new computer useful : https://discussions.apple.com/docs/DOC-3141

Unable to successfully set up my WVC200 to view remotely.

Similar Messages

Maybe you are looking for