Unable to switch from one level tabs to two level tabs.

I created my application using one level tabs. When I created parent tabs they didn't show up. I have changed the Page property to Two Level Tabs in the Default Templates by Component section of the Define Theme page. But the 2 level tabs just not show. After some trials even the 1 level tabs dissapeared. I can't see any tab now.
Is there any method to switch safely from one level tabs to two level tabs and have them show properly?
Francisco

I developed my own solution after several days of
working on the issue, and it is kind of complex. I
have a 12 page word document with images explaining
the process, so I cannot post it here. I responded to a thread on this forum several weeks back about this topic. I guarantee that the posts in total in that thread could never fill a 12 page document. It's not that complicated.
You can find it here:
Re: Can someone explain the diference between the tabs and the tab sets?
The main problem when switching from one-level tabs to two-level tabs is the "psuedo-parent-tab" that gets created as a container reference for the standard tabs. Once you get past that - and change the default template for your application you're well on your way.
Earl

Similar Messages

  • How do I switch from one column to another in a simple 3-column document?  Seems lame, but I can't find the answer in "help"...

    How do I switch from one column to the next, skip around?  Tab key doesn't seem to do itl.  I can't find any "help" in "help".  Help.  Please.  Thank you.

    Hi Karen,
    It is simple.
    Columns fill with text as the text becomes enough to spill over from the previous column. Below is an example. I have used a huge (6" botom margin setting to shorten the page to a reasonable length for a screen shot, and turned on Show layout and Show invisibles so the column boundaries and invisible characters can be seen. Here there's no text in column 3 as there is only enough text to fill column 1 and part of column 2.
    As more text is added, it eventually fills column 2 and flows into column 3:
    You can force the text into the next column by inserting a column break. Here, a column break has repalced the paragraph break in column 2 (after 'fascilisi."):
    Regards,
    Barry

  • Change one level tabs to two level

    Is there an easy way to change one level of tabs to two levels without re-building an application ?
    Can someone show me how to do this please ?

    My recommendation is to do the following:
    1. Navigate to Home>Application Builder>Application ###>Shared Components>Tabs
    2. "Add" a new parent level tab; or two
    3. Edit each standard tab and place it in the parent tab you wish it to appear; you do this by populating the "Parent Tab Set" attribute of the standard tab.
    4. Change your application or a given page to be some sort of TWO LEVEL TAB page template.
    Your done; you should have your application migrated from one level tabs to two level tabs. If you defined page templates at the page level you will need to adjust them accordingly.
    Mike

  • How do you switch from one iTunes account to another on your apple tv?

    How do you switch from one iTunes account to another on your apple tv?

    Welcome to the Apple community.
    I assume you do mean a different account and not simply a different iTunes library. Unfortunately, in order to switch accounts, you would need to log out and log in to the second account.

  • If you do have two gmail email, how can you switch from one gmail to another?

    I do have to gmail account and i dont know how i can set up both of them on my iphone at the same time. How to switch from one email to another?

    You can add as many e-mail accounts as you want. Go to Settings>Mail, Contacts,Calendars to add them.
    When in the mail app,you can have all inboxes displayed together (unified inbox) or you can tap the "Mailboxes" arrow in the upper left and select which one you want.

  • HT201320 How can I switch from one email user to another?

    How can I switch from one email account to another?

    You have to select between the two accounts in the mail app.
    Say for instance that you are reading an email in your XYZ email account. Tap the button in the upper left corner of the mail app to back out all the way to where you can see all of the email accounts.... Tap InBox, then tap XYZ email Account and that will take you back to the main MailBoxes window.
    Is that what you want to know? There is no way to simply "toggle" between the two accounts.

  • Time machine problem. Switching from one external drive to another. Problem started when upgrading to Mavrics, and changing to a WD drive

    I am a long time Mac user, running my business on an apple  platform since 1984. I currently use a 17" MacBook Pro as my primary computer for work. when it is at work it is plugged in via thunderbolt to my monitor and a one tb back up drive. I use time machine to back up the laptop to the one tb drive. When I go home, I take the laptop with me and use another drive at home as a back up. This way I have redundant back ups, in two separate locations. I have been doing this for years, and Time machine has worked flawlessly, automaticity switching from one drive to another.
    I recently switched to Maverics, and got a new drive for home. Now whether I am at home or at work, time machine fails to automatically back up. It will alert me every hour that backups cannot be completed, and I  must go to the time machine control panel and manually select a drive and click, "back up now". I also see an alert that says "waiting to complete first back up" even though each backup has been completed.
    This is quite annoying, and sometimes embarrassing. When giving lectures in large venues, the backup failure alert appears and shuts down my keynote presentation (again, something new since switching to Maverics and the new WD drive.
    I have reformatted the WD drive, and also spent time trying to change parameters in the time machine control panel, but so far no luck.
    Any advice out there?

    Time machine requires a GUID partion scheme, as well as a Mac OS X extended, journaled Volume.
    It needs these to correctly:
    1) copy the files
    2) run a modified spotlight index pass on the files
    Both are required to complete a abckup, and most new drives do not conme this way from the factory.

  • I have recently transferred data from my old Mac to my new one. The result was good, but I have 2 users now, whose data I want to merge into 1 single user, so to avoid having to switch from one user to the other to view and use certain files. How to do it

    I have recently transferred data from my old Mac to my new one. The result was good, but I have 2 users now, whose data I want to merge into 1 single user, so to avoid having to switch from one user to the other to view and use certain files. How to do it?

    Here's an easy way:
    Pick the user that you want to eliminate (making sure that the remaining user has administrator privileges) and move all of the data that you want to keep into the Shared folder. Reboot or log out and login to the user you want to keep. Copy all the data from the Shared folder into your account - placing it neatly in folders (Documents, Music, Movies, etc.).
    Once the data is moved, log into the account you want to delete just once more to make certain that you've grabbed all the data you want to keep. Log out and log back into your admin account and go to System Preferences>Users & Groups and delete the 'old' user.
    That should do it.
    Clinton

  • Error in switching from one database location  to another database location in Crystal Reports using JSP

    Hi,
    Please help me in resolving the issue while changing the database dynamically in crystal reports using JSP. I followed the below link to change DB connection dynamically.
    CRJava Modify DB Location
    Please help me on this.
    While switching from one database to another i found the issue.
    dbController.replaceConnection(oldConnectionInfo, newConnectionInfo,pFields,replaceParams);
    The Error is:
    com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Subreport does not exist.---- Error code:-2147467259 Error code name:failed
        at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(SourceFile:2284)
        at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(SourceFile:732)
        at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(SourceFile:166)
        at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.a(SourceFile:528)
        at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.call(SourceFile:526)
        at com.crystaldecisions.reports.common.ThreadGuard.syncExecute(SourceFile:102)
        at com.businessobjects.reports.sdk.JRCCommunicationAdapter.for(SourceFile:524)
        at com.businessobjects.reports.sdk.JRCCommunicationAdapter.int(SourceFile:423)
        at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(SourceFile:480)
        at com.businessobjects.reports.sdk.JRCCommunicationAdapter.int(SourceFile:421)
        at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(SourceFile:351)
        at com.businessobjects.sdk.erom.jrc.a.a(SourceFile:54)
        at com.businessobjects.sdk.erom.jrc.a.execute(SourceFile:67)
        at com.crystaldecisions.proxy.remoteagent.RemoteAgent$a.execute(SourceFile:716)
        at com.crystaldecisions.proxy.remoteagent.CommunicationChannel.a(SourceFile:125)
        at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(SourceFile:537)
        at com.crystaldecisions.proxy.remoteagent.RemoteAgent.char(SourceFile:220)
        at com.crystaldecisions.proxy.remoteagent.RemoteAgent.new(SourceFile:240)
        at com.crystaldecisions.proxy.remoteagent.RemoteAgent.do(SourceFile:452)
        at com.crystaldecisions.proxy.remoteagent.RemoteAgent.if(SourceFile:429)
        at com.crystaldecisions.proxy.remoteagent.UndoUnitBase.performDo(SourceFile:156)
        at com.crystaldecisions.proxy.remoteagent.UndoUnitBase.a(SourceFile:106)
        at com.crystaldecisions.sdk.occa.report.application.an.a(SourceFile:65)
        at com.crystaldecisions.sdk.occa.report.application.ParameterFieldController.a(SourceFile:1921)
        at com.crystaldecisions.sdk.occa.report.application.ParameterFieldController.setCurrentValues(SourceFile:2237)
        at com.crystaldecisions.sdk.occa.report.application.ParameterFieldController.setCurrentValue(SourceFile:2328)
        at org.apache.jsp.DynamicDB_jsp._jspService(DynamicDB_jsp.java:255)
        at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:728)
        at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:432)
        at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:390)
        at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:334)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:728)
        at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:305)
        at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:210)
        at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:222)
        at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:123)
        at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:502)
        at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:171)
        at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:99)
        at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:953)
        at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:118)
        at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:408)
        at org.apache.coyote.http11.AbstractHttp11Processor.process(AbstractHttp11Processor.java:1023)
        at org.apache.coyote.AbstractProtocol$AbstractConnectionHandler.process(AbstractProtocol.java:589)
        at org.apache.tomcat.util.net.JIoEndpoint$SocketProcessor.run(JIoEndpoint.java:310)
        at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source)
        at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
        at java.lang.Thread.run(Unknown Source)
    Caused by: com.crystaldecisions.reports.reportdefinition.ReportModificationException: Subreport does not exist.
        at com.businessobjects.reports.sdk.requesthandler.ParameterRequestHandler.a(SourceFile:229)
        at com.businessobjects.reports.sdk.requesthandler.ParameterRequestHandler.for(SourceFile:214)
        at com.businessobjects.reports.sdk.JRCCommunicationAdapter.do(SourceFile:1492)
        at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(SourceFile:660)
        ... 47 more
    Any help Appreciated.
    Thanks
    Penchal

    Do you have subreports in your reports?
    If yes, set the connection info for the subreports as well.
    Additionaly refer to the below discussion
    http://scn.sap.com/thread/3153289
    As you are using Crystal reports for ecllipse runtime libraries to build your jsp, you would need to post your dicussions in the below forum to get better response.
    http://scn.sap.com/community/crystal-reports-for-eclipse
    The above space is dedicated for the issues with crystal reports for ecllipse.
    Thanks,
    Prithvi

  • Switch from one application  to another without entered a login detail

    Hi,
    I have two application in same workspace and they have same authentication or login detail. if i switch from one application to another then it do not ask for login .
    for examle if i switch to sample application there login detail is diffrent it ask for username as demo and passoword as workspace then it should for login detail.
    can i create a menu of those application those have same login credential?
    how can i do this?
    Thanks and Regards
    Vedant

    Dear Friend,
    Thanks to reply me.
    i am using Customise authentication scheme .
    What should i pass in Cookie Attributes
    1.Cookie Name --------?
    2.Cookie Path --------?
    3.Cookie Domain-------?
    suppose one application path is
    http://apex.oracle.com/pls/apex/f?p=157:68
    suppose Second application path is
    http://apex.oracle.com/pls/apex/f?p=115:1
    and both application are in same Workspace
    i want to switch One application to Second Application .
    How to pass this application information in Cookie ?
    How can i do this ?
    Thanks
    Edited by: Vedant on Sep 25, 2011 11:48 PM

  • Switching from one View to another in the Portal

    Hi Experts,
    We have created many global views from one query.  We have created these in thr portal.
    Our problem is when we switch from one view to another, it will carry all the filter values from the previous view.  Ideally we only want to pass the values from the variable entry, not the filter values local to the view.
    Does anyone of you knows how to solve this problem?  I am trying to look at the Customer exit... and do something with the mapping.  But this one will affect all the drill-downs.  Any thoughts?
    Best Regards,
    Rose

    Hi,
    I have somehow solved it using the exit.  In this case the source and target query is really the same because we are just switching from one view to another using the the same query.  What I did in the exit was:
    -  If the source and target query are the same.
    -  remove all the mappings except the ones with object types "Variables".
    This ensures that:
    1) I only apply this logic if the source and destination query is the same.
    2) The restrictions that will be applied to the destination view when I switch
    from one view to another will always be only be the paramater values
    (default or entered by the user) when they first run the query.
    Best Regards,
    Rose

  • DATAGRID FOCUS ISSUE: Focus got lost, while moving from one cell to another cell using tab key.

    Problem: Focus got lost, while moving from one cell to another cell using tab key.
    Example: In an AdvanceDataGrid, there are three columns having custom ItemRenderer with Spark TextInput control (editable=true & focusEnabled=true).
    When I try to move the focus in with in 2nd, 3rd & 4th column using tab key, focus got lost. Most of the time it’s working, but some time it doesn’t work. There’s no clue as to how may rows/columns the focus has jumped to; or whether the focus has gone out of the data grid altogether.
    Observations: I am not sure whether this problem is because of custom component implementation or it is because of some issue related to Flex Component.
    It only occurs when we perform some actions like some server call, some complex logic execution etc. at the focus out event of itemrenderer.
    There is one property of datagrid i.e. editedItemPosition which contains row & column index of datagrid. On the focus out event, it gets null when focus got lost. We tried to set it, but it didn’t work.
    Steps Performed:-
    1. Currently focus is in 2nd column i.e. Apply to #.
    2. Once I press tab key from 2nd column, it goes to 3rd column which is correct.
    3. Now if I press tab key from 2nd column i.e. Payment #, focus should go to 3rd column, but it goes out of data grid and set the focus of button which is outside data grid.

    http://search.java.sun.com/search/java/index.jsp?qp=&nh=10&qt=%2Bjtable+%2Btab+%2B%22enter+key%22&col=javaforums

  • How to keep Itunes playing music when switching from one user account to another?

    On my old pc, that running XP, itunes would continue playing when I was switching from one user account to another.
    Now I have a new PC running win8 and the music stops playing when I switch from one user account to another. I think Itunes is still running on the user that is not active, but the music is not coming out of the speekers.
    Does anyone know how I can get the win8 pc to do as the old XP machine?

    Hello over here,
    The steps below detail how to place an input chooser that will allow for the adjustment of your keyboard layout while on the login screen.
    From the Apple menu, choose System Preferences.
    Click Users & Groups to display the pane (or choose User & Groups from the View menu).
    If the lock icon in the lower-left corner of the window is closed, click it, then enter the name and password of an administrator to unlock it.
    Click Login Options.
    Select the "Show Input menu in login window" checkbox.
    From the Apple menu, choose Log Out.
    At the login window, click the Input menu (shows the name of the currently selected input source next to a keyboard icon) in the upper-right corner of the screen, then select the desired input source or keyboard layout. If you don't see the input source you are looking for, move the pointer over Other Input Sources, then select the input source from the complete list that appears.
    OS X: How to change the keyboard layout at the login window
    http://support.apple.com/kb/HT4099
    Cheers,
    Allen

  • HT5622 How to switch from one apple store to another

    How to switch from one apple store to another

    Follow this procedure:
    1. Go to Settings > iTunes & App Stores > Apple ID.
    2. Tap your Apple ID.
    3. Tap View Apple ID.
    4. Enter your password.
    5. Go to Country/Region in the popup window to change to the desired store.
    See also: http://support.apple.com/kb/HT1311

  • How to switch from  one Data base to another data base

    Hi,
    How to switch from one Data base to another data base if first data base server like in restoring,blocking,network disconnected state.
    Please help out for the same.
    Regards,
    Anilkumar

    Sounds like a problem for forums/support from the DB provider, as this problem is normally solved through some form of HA provided by the DB (or some cluster software, but still not Java) with, normally, a shared (virtual) IP address.

Maybe you are looking for