Unable to switch to tty

Hi all,
after putting my system in hybernate mode, i realized something went wrong. I'm not able to switch to tty anymore by pressing ctrl-alt-fx (x=1..6).
I also noticed that boot and close messages don't appear anymore.
What can i do?
Thanks in advance

virusso80 wrote:
Misfit138 wrote:I recently had a similar issue. Perhaps the thread will help you troubleshoot a bit deeper.
Hope it helps.
Thanks misfit for the suggestion. I checked alsa and it is running correctly. Moreover i'm not able to see any boot/shutdown msgs!
By the way I was trying to understand something reading logs in /var/logs, but i'm not able to find anything that seems to be useful. Can you please suggest what to look for...just to retrieve useful information?
Thanks
Hmmm... No, I was not expecting you to have the identical issue (alsa daemon not initializing properly, thereby inittab not completing). I was merely trying to give you some useful commands to see if the ttys are being created, if they are spawning, if you can manually spawn them, etc..

Similar Messages

After upgrading from iOS 7.1.2 to iOS8 on my iphone5, i am unable to switch 2G/3G.

After upgrading from iOS 7.1.2 to iOS8 on my iphone5, i am unable to switch 2G/3G, i think apple has removed that toggle. Poor 3G range is here in india-Pune. Requesting Apple Dev. Team to do the needful asap.

ios 8 *****. i am unable to switch 2G to 3G while it eating my battery. *****

HT1414 i am unable to switch on the wifi on my iPhone 4s? I have tried all of the above ways.

I am unable to switch on the wifi on my iPhone 4s.
I have tried restart, restore, update etc.
But its still not working.
Please help

Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

Unable to Switch Audio Sync Settings

Hey everyone,
I'm trying to create an animation based off of a 5-minute mp3 audio recording. I need to be able to switch my audio sync settings to Stream so that I can preview audio anywhere in my animation. Currently if I press play just anywhere in the animation it doesn't play the audio. I have to play from the beginning to hear.
After doing some searching on the Internet, I figured out I have to switch my audio sync setting to Stream so that I can play audio anywhere in the timeline. However, the only option I have available is Event. The other ones are greyed out, as the screenshots below testify. Any help would be appreciated. Thanks!
Hardware and Software Statistics:
Adobe Flash Professional CC (CS6) - Version 13.1.0.226
Windows 7 Home Premium - Version 6.1 - Build 7601: Service Pack 1
Intel Core i7, 4GB RAM, NVIDIA GeForce GT 525M

The first the thing a person should always do when they encounter a problem is restart their computer. No worries, I did that.
I tried converting the file to OGG and WAV to see if it would work better. Apparently Flash Professional handles WAV fine, allowing me to switch between Stream and Event audio sync settings. That's kind of strange, because WAV files are so huge and aren't practical when developing a game or something like that.
Thankfully, I'm just using Flash Professional to export a video, so I don't care about file size, but it's a disturbing bug.
If anyone knows why I was unable to switch to Stream audio sync settings with MP3 files, please speak up.

[RESOLVED] Can't switch between TTYs when GDM is running.

Hello, I have a strange problem because I can't think of why it would happen...
If I boot up without GDM starting (ie: runlevel 3), I can switch between TTYs with Ctrl+Alt+Fx perfectly well, however if I then start GDM (or boot into runlevel 5 so it starts automatically), I no longer have this ability. Any idea why?
Last edited by Barrucadu (2008-04-24 14:37:07)

I think this has nothing to do with gdm, it's a problem with X. Last time I had this it was because X didn't properly interpret my keyboard settings - so try to comment out any specific Xkb* stuff in /etc/X11/xorg.conf and try to restart X.
On the other hand, it might be something else - then I don't know.

Unable to switch on my mw1

dear sony team
i am sandeep rathore from chhattishgarh bilaspur i purchasing a sony mw1 month ago but now iits not working , i am unable to switch on, even when i charging the led screen are not showing battery mono pls suggest what i am do.
regards
Sandeep Rathore

You should take it to a Sony repair center
http://www.sonymobile.com/global-en/support/contact-us/
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Unable to switch Central System Administration into Change Mode

Hi,
I am bit rusty on the Solution Manager - Central System Administration.
While experimenting with my Solman system I did the following.
1. Logged into Solman and started transaction Solution_Manager
2. Switched to the Solution that has been configured and then followed Operations Setup->Solution Monitoring -> System Administration -> Central System Administration for <My System> (here my system is the system I wish to monitor).
3. After following the navigation to the selected item as described in step 2, I selected the menu items Session Components->Complete.
4. After this action of selecting the Complete session from the menu, my Central System Administration for <My System> is continuously showing Display Mode.
I am unable to switch back the system to Change Mode.
Am I missing something ? What needs to be done ?
Regards,
Siddhesh

Siddhesh Ghag wrote:>
>
> 3. After following the navigation to the selected item as described in step 2, I selected the menu items Session Components->Complete.
>
> Regards,
> Siddhesh
This was the wrong step. By setting the Session Component to "Complete", no further changes are allowed (and you receive a pop-up).
The procedure to reopen the session component is not documented for customers. Please create a customer message on SV-SMG-MON-CSA, open the service connection and provide logon information.
You might state my name in the message, I will then assist the message processor.
Best regards,
Ruediger Stoecker

My iPhone 4 has switched off for no reason , and now I am unable to switch this on again ??? if anybody has a answer about how I could reboot it , he's welcome, many thanks .

my iPhone 4 has switched off for no reason, and now I am unable to switch this on again???if anybody could help about a reboot tip , he's welcome, many thanks...

1. On your iPhone 4 press and hold both the button and the Home button for about ten seconds. After ten seconds you should see the Apple logo showing up.
2. Now try to run you phone again and see if it works.
If a hard reset the still can't get the device back to a working order.
1. Plug in the device to the cumputer and start iTunes.
2. Press and hold the Sleep/Wake + Home for 10 seconds.
3. Once you see the Apple Logo appears, release the power and continue to hold down the home button for about 5-10 seconds. Look iniTunes and see if your device have shows up.
4. iTunes will notify you that you are now in Recovery mode. Click on OK to continue with the restore process.
5. Next press and hold on the SHIFT button and click on the Restore button. Select the latest IPSW file and the prompt appears.
6. iTunes should now attempt to get your device back to the manufacturer setting.
7. iTunes will later give you an opportunity to restore you content from the PC. Every time when you do a sync, iTunes makes a backup so you can choose the latest backup from the sync.

HT4623 I am unable to switch on my IPad as it states that 'iPad is disabled'. How do i fix this problem when I have no access to the iPad? Any help or advice will be gratefully received.

I am unable to switch on my IPad as it states that 'iPad is disabled'. How do I fix this problem when I have no access to the iPad? Any help or advice will be gratefully received.

Forgotten Passcode or device disabled after entering wrong passcode

I am unable to switch on/ off my wifi

I'm unable to switch on /off my wifi, any helps?
Also I'm having problems through my camera ,when I open my camera app
And capture a picture the app automatically switches off,also the captured pic is not saved,
Any helps on this?

Try a reset. Hold the Sleep and Home button down (together) for about 10 seconds until you see the Apple logo. Ignore the red slider.

Sony Xperia Z1 No Alarm Display and Unable to switch off alarm

Eversince I had the first Android Kit Kat update, my Xperia Z1 C6903 was not able to hear any notification sounds, my alarm sound worked but unable to switch it off or delete it and when my contacts call me, it send it straight to voicemail and I don't even hear the notifcation call sounds either. Did a reboot and went on safe mode, I still had the same problem. Found out online that there is a sound bug with my current firmware version: 14.3.A.0.681.
When the new update 14.3.A.0.757 was available, I downloaded it. After this, my sound notifications worked fine, however, my alarm is still not working. Both on normal and safety mode, my alarm does the following:
1) The alarm sound works
2) Side key behaviour does not show up on my screen, so I am not able to dismiss my alarm
3) I manually go to my "Alarm and Clock" app and press the "OFF" indicator. Alarm sound does not stop.
4) I have to go to > alarm settings >Delete alarms >Choose the current alarm to delete > Alarm Sound then stops.
This has been happening eversince the Android Kit Kat version was available for download (the previous and current one). I have reboot my phone, gone on safety mode, I have gone to >Settings >APPS> All> Clock > Clear Data, and went to the Sony PC Companion > Support Zone > Repair phone/tablet, as well as deleted all my apps.
I do not know what else to do. I can only conclude that this is an existing problem with the new software update. I need my alarm working or else I am unable to get up for my morning meetings. PLEASE HELP!

so i have been having the exact problem on my Z1. the alrm goes off at the right time....the notification works perfectly but you just cannot switch it off or snooze it. if i go to the drop down menu the active alarm is not listed there...the side buttons dont work or have no effect even when configured.
you literally have to power the phone off for it to stop sounding. this is really annoying and i notice that teh last comment here was a month ago and Sony have still not addressed this problem. if you google this issue there a stacks of people with the same problem and more frustarted as we keep getting suggested fixes like clear clock cache which EVERYONE knows will not work as the problem is not with the data of the alarm....its a bug in the software that prevents the app from excuting teh way it was intended to.
my alarms worked perfectly fine before teh update was applied. ever since teh update i ahev had this problem. i dont believe that a solution is to install another alarm app from google play store. i bought the phone which advertises the alarm as a feature and if sony cannot fix or address this probelm then you have falsely advertised...
i am a sold out sony fan...i will never purchase any other brand of phone based on my past experience with sony products but this problem is making me think otherwise. give us a proper fix for this alarm issue and dont treat us like ignorant fools with your suggessted fixes like start in safe mode or reboot your phone....that will never ever fix the problem....its just a way of avoiding the fact that you dont know what to do to fix this problem...

TS3432 unable to switch between applivations in ipod touch 4

unable to switch between applivations in ipod touch 4.How to.clicking twice homw botton doesnt help.

If you have a 2G iPod, that model does not support mutlitasking and thus ther is not double clicking the Home button.
A 2G can only go to 4.2.1
To identify yours:
Identifying iPod models
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

Black Screen on switch to tty after install proprietary catalyst-hook

After Install the latest version of :
catalyst-total 14.9-1
from AUR I can startx and login to x sessions, But I can'nt switch to tty right after that executing startx and entering into X Also after suspend.
When i pressing C+M+F2 or even logout from X Session Then i can'nt access to tty consoles and just a black screen appears and nothing work even my mouse.
I have followed wiki and some forum workarounds to this issue for example disabling KMS or put vga= kernel param on grub,...but none of them dose'nt solved the problem!
I have a ATI 6470M card :
# lspci -nn | grep VGA
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Seymour [Radeon HD 6400M/7400M Series] [1002:6760]
also I have installed following:
linux -> 3.16.4-1
linux-headers -> 3.16.4-1
xorg-server -> 1.15.2-1
Any idea? please.
Sorry for my english

I also use a Samsung N220 and found two ways to avoid this issue:
intel_idle.max_cstate=0 as a kernel boot parameter
disable CPU power saving in BIOS settings
PS: See also https://bbs.archlinux.org/viewtopic.php … 27#p909727
Last edited by Waldteufel (2011-04-06 17:55:23)

I phone 6 unable to switch on

Hi
My i phone 6 is unable to switch on many times I tried to switch on but no any response..
my is I phone is 2 months old still in replaceme warranty...

If you are sure the device is charged, then try a reset. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone should reboot. This can take up to 15 seconds or longer.

HT4061 unable to switch on

unable to switch on my iphone

RESET DEVICE
Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost).

Unable to switch to tty

Similar Messages

Maybe you are looking for