Unable to sync using PS CC 2014! Sync says I'm not connected!!!
I was just in ps cc 2014 and decided to run sync to uplead recents changes I've made in PS. However the sync menu says I'm not connected even tho the cloud app says I am. any help would be appreciated. TIA
A screen capture withe the exact error message might be helpful. When I use upload settings from CC 2014 edit menu I have no problem.
Does your PS Preferences show the correct Adobe user ID?
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.
Similar Messages
-
I cant get it to go online to use the pro storage it says I am not connected
i cant use my pro subscrption and when I go to back up it says I am not connected to the internet
I just found that as my new computer was using a different firewall.
Thanks
Sandy -
every time i try to use the itunes store it says make ure your connection is active and try again
Hi 1626army,
Thanks for visiting Apple Support Communities.
You may find the steps in this article helpful with troubleshooting the error message you are seeing:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Regards,
Jeremy -
I am trying to install the latest software update, but a message flashes up to say I am not connected to the Internet, when I actually am! Any ideas please? Thanks
Have you tried restarting or resetting your iPad or your router?
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
Even though you are connected to the Internet, sometimes resetting your router can help. It's very easy to do. Just unplug it for about 30 seconds, plug it back in and let it start up. -
Can't use apps because it says I'm not connected to wireless network
How do I use apps if it keeps saying I'm not connected to wireless network when I'm connected to wifi and have data connectivity??
rixxy12345 wrote:
How do I use apps if it keeps saying I'm not connected to wireless network when I'm connected to wifi and have data connectivity??
Which apps?
Click if you want to Thank someone. If Problem is resolved, so that others can make use of it. -
The iTunes on my desktop is no longer recognizing any of my devices (iPads, iPods, or iPhones). I am unable to sync. And when I connect a device I am asked on the device if I "Trust this Computer". When I hit "Trust" nothing happens. Help?
Hello monkeymonkeydo,
To get this fixed use the steps found here:
iPod not recognized in 'My Computer' and in iTunes for Windows
Hope this helps.
~Julian -
my iPod has not been working for a month now and i was hoping that you could help me.The part where you charge and sync the iPod is not connecting.There is defiantly not the lead as we use it for the iPhone and that works please could you help!
yours sincerly
jackfromsurreyWhat I am saying is ..........
The iPhone HAS to be active making calls on the UK carrier network for the carrier to identify as "theirs" and therefore eligible for the Carrier to unlock
The way to achieve this is to use a PAYG sim making and receiving calls to establish a customer relationship with the Carrier and then follow the Carrier's process to unlock
With a PAYG it usually means adding a specified (by the carrier ) amount usually £15 /£20 depending on the carrier
This is how O2 function and according to Gemma this is how Vodafone work -
Even when I authorised my pc on my iphone, when i sync the iphone with a new purchase, it prompts and error that unable to sync due to pc not authorised.
Hello, Jagatheswary.
Thank you for visiting Apple Support Communities.
The most common cause for this issue would be media or Apps present in your library that is purchased with another Apple ID. The article below will walk you through the process of verifying if that is the case or correcting the issue if not.
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
Cheers,
Jason H. -
why does my itunes say "Itunes could not connect to the iphone because the device timed out"? I just want to sync my iphone with my itunes. please help
If you are using a USB hub, don't. Connect directly to the computer. Disconnect all other USB devices except for keyboard and mouse.
-
I have a new iPod and cannot get my music loaded on to it. The computer says it's not connected, and then it says it is synced but there's still no mucis on it.
If that's not a real email, you need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(99730) -
I have a new Ipad air. I have synced it to my PC before. This time I get an error message saying iTunes could not connect to the iPad because the device time out - what do I do?
Quit iTunes, restart your computer, reset the iPad and try again.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
While sync my Ipad 1 I got the following message:The ipad "untitled playlist" cannot be synced.The device is not connected. What could I do besides restoring?
" I get told that my ipad cannot be synced because there is not enough free space to hold all the items in the itunes library! "
Ok. Choose less to sync to your ipad.
"Also very puzzled about icloud! "
What is the confusion? -
i am trying to sync iphone 5 to itunes but it says "iTunes could not connect to the iphone as an error occured while reading from the device " and the iphone is not seen on itunes........
First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. And then reboot your computer.
See if that fixes your problem. -
The error says, "iTunes could not connect to this iPhone. Could not connect to the device." But it is connected and shows up in iTunes but won't sync or show apps. Never happened before.
Have you seen this Apple support document?
http://support.apple.com/kb/TS3221
B-rock -
iphone wont sync, says software is not installed, asks me to unistall itunes and install 64 bit version, done, nothing happened. Any suggestions?
See also TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, and TS4062: iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi syncing.
tt2
Maybe you are looking for
-
How to give different value to a static variable???
Hi all: Is there any solution to set different values to a static variable???I had try two ways but all have errors! 1.Way_1 protected String tmp=null; protected void initSituation(int sayorpress) if (sayorpress==0) tmp = "string1"; else if (sayorpre
-
Is this hardware or software issue
Hello i bought my macbook pro 2 months ago, it was all okay and i was more than satisfied with its performance. 3 days ago, i was working on my macbook and i was using alot of applications, suddenly, mac freezes, i thought that was just 1 time thing,
-
Hello friends I have a complex view with about 40000 records...Now I have a query involving a 'case' clause in it.. And if i run this query it runs for 15 seconds...If i replace this 'case' with decode it executes in a second. SELECT (CASE WHEN SUM(C
-
Yesterday I wanted to dig into my library to pull some images of my kids for a calendar. I have 2010 images inside the library, while previous years reside on another HD in my Mac Pro. I became increasingly frustrated as I had to wait for Aperture to
-
Hi all! I found myself implementing hashCode and equals methods for a class, and googled a little bit looking for a good implementation. I found that the most used is this one: public int hashCode() { final int prime = 31; int