Unable to take screen pictures as instructed, holding home button and pressing sleep button?
1. Unable to take screen pictures as instructed, holding the home button and pressing the sleep button doesn't work.
2. Siri doesn't respond when holding the phone to ear.
1. Unable to take screen pictures as instructed, holding the home button and pressing the sleep button doesn't work.
I do it the other way around. I press and hold the Power button and then very quickly press and release the Home button.
2. Siri doesn't respond when holding the phone to ear.
Have you tuened it on? Settings/General/Siri/Raise to Speak
Similar Messages
-
My Ipod is frozen. I've tried holding the power and the sleep button for 10 sec until the apple came on the screen. After this i've tried again to turn it off and to slide the unlock button, but it didn't work! Any Ideas????
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My IPhone 5s turned itself off and will not turn back on even when I hold the home button and the sleep button. What do I need to do?
Me, I would call apple Help..it's a new iPhone..
-
Camera is black-- unable to take any pictures. All phone content has been restored and still hasn't fixed the issue. HELP
Hey DannyHTDB,
Thanks for the question. If you follow steps 1, 4, then 5 in the iPod troubleshooting assistant, that will most likely resolve the issue:
iPod Troubleshooting Assisstant
http://www.apple.com/support/ipodtouch/assistant/ipodtouch/
All the best,
David -
since upgrading to Lion, i am unable to take screen shots. i get the message that i don't have permission to save files to the place where SSs are saved. how can i regain the ability to save screen shots? thanks
First of all, are you using the OS native screen capture?
If not, make sure the application you're using has been update for Lion. I was using Snapz Pro for years, but I need to update it for use with Lion. Meanwhile Grab and the keyboard shortcuts are working on my Lion load.
If you are using the native capture mode unsuccessfully, I would run the Disk Utility and repair permissions on the drive. For some reason, even in past OS Versions, routine maintenance of permissions makes life a lot easier. -
my iphone 3gs ran out of power, now wehn plugged in it will not restart, tried plugging in with different chargers, holding home key and other one but nothing works, screen is either battery icon or Apple iconn
Hi, beth.lau.gr.
Thank you for visiting Apple Support Communities.
I understand you have been experiencing issues with your iPhone restarting and showing you a blue screen. I wont be able to give you an exact answer as to why this is happening. However, this is the most relevant troubleshooting article for this issue. This article also provides options to reach out to us via phone for additional assistance.
If your iOS device restarts, displays the Apple logo, or powers off while you're using it
http://support.apple.com/en-us/HT203899
Cheers,
Jason H. -
so my daughter's ipad2 wont start up i think its on but you cant see anything unless you take a screenshot then you can see for a split second then nothing,and when i hold down the home button and the power button it will reset then i can see apple icon for a second then nothing?????
Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?! -
my ipod touch is frozen... the screen has a picture of the itunes logo and a usb charger. I have held the sleep button and the power button to reset and i have let the battery die and started to recharge...niether worked. any ideas???
Try charing it to 50% at least.
If all else fails, try putting it in DFU mode. Connect it to iTunes, (iTunes may not detect the device, but that's ok) hold the power and home buttons down for 10 seconds, then release the power button but keep holding the home button until it goes into DFU mode. iTunes should detect it and ask for a restore.
~Lt. Leviathan -
I came home and attempted to power on my iPad2. I can see the backlight but nothing on the screen. When I try to reset by pushing the off button and the power button at the same time I can sometimes see the characters briefly but the screen has lines. Can someone tell me if there is anything else I can do before a trip to the repair shop?
WillIf the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
My ipod touch is not recognized on itunes and will not turn on or even give me the battery sign that it is dead. I turned it off and it won't turn back on now. The screen is completely black and won't do anything. I have tried charging it over night and nothing happened. It was never near water. I have tried troubleshooting it by holding down the home button and the sleep/wake button, but nothing happened and it didn't work. What can I do to fix it?
Device Not Recognised
For PC
http://support.apple.com/kb/TS1538
For Mac
http://support.apple.com/kb/ts1591 -
I was on the phone last night and my phone randomly turned off. It will not come back on even when I have tried to hold the home button and the power button at the same time, while being plugged into the computer? What do I do?
Plug it into power for at least 15 minutes. If it doesn't automatically come on, try a reset... press the home and sleep (on/off) buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
-
My Ipod touch won't turn on. I tried holding down the home button and the power button. Any suggestions?
I had the same problem a few weeks ago, I tried pressing and holding the Sleep/Wake button and the Home button at the same time
After about 5 seconds, it seem to start up again
If all else fails, have you tried to take it in to the apple store? The customer service there is always really friendly and helpful
... just don't panic, I'm sure it will be fine -
As the title says, this is a brand new iPod touch bought from a store, I plugged it in a commenced the "setting up" process through iTunes on may iMac. It got to the stage where it said allow this computer to access the device (or something along those lines), i clicked yes, and then a message came up "to allow access, please respond on your iPod touch. however the ipod screen is black, and pressing the buttons doesn't work. How can i fix this? or do I need to return it?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Error message on screen: No bootable device -- insert boot disk and press any key comes on
Error message comes on screen: No bootable device -- insert boot disk and press any key. What do I do?
Install or Reinstall Mavericks or Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
OS X Lion- Erase and reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
If the above is not possible or failes, then replace your hard drive. -
Recently having problem with flickering on monitor (viewsonic vg2436wm). When coming out of sleep mode. It will flicker, the screen goes gray, sometime out. Have to press power button to get screen on. Problem stops. Getting more frequent. After sometime problem stops. My system is a Mac Mini 2010, 2.4 intel core 2 duo, 2 GB, running OSX10.8.5
See if it's related to this...
The 2012 macs (and later apparently) not waking normally from sleep after hours being in sleep. (noted here ...
http://www.xlr8yourmac.com/archives/feb13/022813.html#2012macswontwake
"Why 2012 iMac/2012 Mac Mini won't Wake After Hours of Sleep (Hibernates/Powers Off)")
The sleepimage file still reappears even if never slept. Delete it (hibernate off, etc) - within minutes its back.
A note on that here - http://www.xlr8yourmac.com/feedback/Chameleon_SSD_Optimizer.html
About iMac sleep...
http://forums.macrumors.com/showthread.php?t=1529750
Try this: "sudo pmset autopoweroff 0" and "sudo pmset standby 0"
http://xlr8yourmac.com/archives/sep13/091313.html#10.8.5SleepEjectTip
Maybe you are looking for
-
How to check mass change(vendor) done by any particular user .
Hi, What is a transaction used to check mass change(vendor) done by any particular user . Thanks, Dharmesh
-
Dear Experts, What is opening period for planned orders/ MRP? How do we set it up? Regards, Sachin
-
Error while posting Inbound Idocs-"EDI: Partner profile not available"
Hi, I am getting the error "EDI: Partner profile not available" Status -56 while creating inboud Idocs. I have done the following steps so far 1.Created IDOC basic Type and Message Type. (Custom) 2. Created process code to process the IDOC. 3. Use th
-
Reading current workbook in Excel
Hi, I am trying to read from an ABAP report, using OLE automation, some cells from the currently opened workbook. I don't want to ask the user where the file is, but just read the currently opened file. I was successful to activate the Excel applicat
-
Loud rattling noise while scrolling/loading pages
I have a weird noise coming from the left side of the computer. It gets worse when you load pages, scroll down a page or use a program that requires a lot of memory?