Unable to telnet it
Hi,
Right now, I'm to telnet that database within the machine but I've got this
fig2.jpg - 4shared.com - photo sharing - download image
Here is what I've got when telnetting the database's machine name
fig3.jpg - 4shared.com - photo sharing - download image
Here is what I've got when telnetting the primary IP of that machine
fig4.jpg - 4shared.com - photo sharing - download image
What should I do?
Best regards,
Huamin
Many thanks Atil. Good day.
It's been some days since last time! We've already resetup the machine using SUSE.
I've tried to tnsping database server name like
[oracle@webserver ~]$ tnsping 3masters.dyndns.info
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 14-MAY-2011 15:46:50
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/11.2.0/db_1/network/admin/sqlnet.ora
TNS-03505: Failed to resolve name
But I've got the above error. Any advice for this?
The point is the machine is again connecting to outside through the router and it is not having its own specific IP. How to recognize that host name from outside, for instance, from my home machine?
Here I've already added 1521 port to the router
http://www.4shared.com/photo/SdPj4_y1/fig100.html
From my home machine, I'm now able to ping the IP of the router. But from my home machine, I can't connect to the that database even if I've put the IP of the router as the host of the TNS item like
orcl =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = ???.??.??.???)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
where orcl is the instance_name of that database.
The error that I've got when connecting is
ora-12170: TNS:connect timeout occurred
although I have done the port forward for "1521" on the router!
Similar Messages
-
Posted by: vatsey.sharad - Engineer, HCL Comnet
Jun 6, 2008, 2:09am PST
Hi,
I have two IP's Configured on my Cisco 2800. 1.1.1.1 - Loopback and 2.2.2.2 on Fast Ethernet. Both IP's are pingable across the WAN. And telnet to loopback IP is working fine. However I am unable to telnet to Fast Ethernet IP. The error message while trying to telnet to Fast Ethernet IP is: "Could not open connection to the host, on port 23: Connect failed". I tried to debug telnet on the router. The Debug output for unsuccessful telnet is as follows:
Telnet194: recv SB NAWS 139 24
However for a successful telnet session, the output is:
Telnet195: 1 1 251 1
TCP195: Telnet sent WILL ECHO (1)
Telnet195: 2 2 251 3
TCP195: Telnet sent WILL SUPPRESS-GA (3)
Telnet195: 80000 80000 253 24
TCP195: Telnet sent DO TTY-TYPE (24)
Telnet195: 10000000 10000000 253 31
TCP195: Telnet sent DO WINDOW-SIZE (31)
TCP195: Telnet received DO ECHO (1)
TCP195: Telnet received DO SUPPRESS-GA (3)
TCP195: Telnet received WILL TTY-TYPE (24)
Telnet195: Sent SB 24 1
TCP195: Telnet received WILL WINDOW-SIZE (31)
Telnet195: recv SB NAWS 110 52
Telnet195: recv SB 24 0 ANSI
There are no ACL's or firewalls involved in the picture.Sharad
How many forums did you post this question in? I have already found it in 2 other forums.
HTH
Rick -
Unable to telnet to LINUX desktop
I've installed Linux 2.6.9-42.0.0.0.1 ( downloaded from oracle's website) and I'm unable to telnet to this machine from my laptop.
I get this error
C:\Documents and Settings\Administrator>telnet oragrid
Connecting To oragrid...Could not open connection to the host, on port 23: Connect failed
This is my first linux trial so I guess you need to tell me from scratch regarding starting the telnet.
Thanks
MukulMukul,
Search this forum for "telnet". You'll see threads such as this one:
Re: FTP & TELNET in Enterprise Linux
Bottom line, I recommend you use ssh rather than telnet. If you're connecting from Windows, download Putty, for example.
Sergio -
Unable to Telnet / SSH to a particular cisco switch
Hello,
I have an unusual issue that I just can't seem to track down. We have a Windows Server 2008 R2 box that is unable to telnet or ssh to one switch in our network.
Server IP: 10.0.0.74
Cisco Switch IP: 10.1.0.7
I am able to access all other switches/routers on the 10.1.0.x network, but not this one. I ping and tracert by ip address and name.
We have a number other servers on our network and they all can access this switch
Example:
a. 10.0.0.73 can telnet/ssh to 10.1.0.7
b. 10.0.0.72 can telnet/ssh to 10.1.0.7
c. 10.0.0.50 can telnet/ssh to 10.1.0.7
d. My workstation (10.0.250.213) can telnet/ssh to 10.1.0.7
If anyone can help with troubleshooting further, I would greatly appreciate it.Thanks for the reply Philippe! Here is the route print
IPv4 Route Table
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 10.0.0.2 10.0.0.74 266
10.0.0.0 255.255.0.0 On-link 10.0.0.74 266
10.0.0.74 255.255.255.255 On-link 10.0.0.74 266
10.0.255.255 255.255.255.255 On-link 10.0.0.74 266
10.10.0.0 255.255.0.0 On-link 10.0.0.74 266
10.10.0.74 255.255.255.255 On-link 10.0.0.74 266
10.10.255.255 255.255.255.255 On-link 10.0.0.74 266
127.0.0.0 255.0.0.0 On-link 127.0.0.1 306
127.0.0.1 255.255.255.255 On-link 127.0.0.1 306
127.255.255.255 255.255.255.255 On-link 127.0.0.1 306
224.0.0.0 240.0.0.0 On-link 127.0.0.1 306
224.0.0.0 240.0.0.0 On-link 10.0.0.74 266
255.255.255.255 255.255.255.255 On-link 127.0.0.1 306
255.255.255.255 255.255.255.255 On-link 10.0.0.74 266
===========================================================================
Persistent Routes:
Network Address Netmask Gateway Address Metric
0.0.0.0 0.0.0.0 10.0.0.2 Default
===========================================================================
IPv6 Route Table
===========================================================================
Active Routes:
If Metric Network Destination Gateway
1 306 ::1/128 On-link
1 306 ff00::/8 On-link
===========================================================================
Persistent Routes:
None
Firewall is disabled and there is no active antivirus. Im pretty sure port blocking is not the issue. I am able to ssh and telnet from this box to every other switch/router in our network.
This server has Solarwinds on it and tracks the health of our network (servers, routers, switches, ups, ect.). The only reason we noticed an issue is because it stopped backing up the config for this particular switch. All other switchs/routers
config is backed up to this server every morning at 2:00AM.
With solarwinds, this server is also able to communicate with this switch via snmp / icmp and ping.
Thanks again for the help! -
Unable to telnet to localhost after CU5
Hi
We upgraded E2013 to CU5 on Sat 13 - On Thu 18 at 9:12 all 4 CAS servers stopped processing mail
error from smarthost:
421 4.3.2 The maximum number of concurrent connections has exceeded a limit, closing transmission channel
unable to telnet locally: telnet localhost 25
421 4.3.2 Service not available
netstat -an | find "25" shows port is listening
Test-SmtpConnectivity shows success
Any ideas appreciated
shapiHi ,
Please check the below mentioned links
http://social.technet.microsoft.com/Forums/exchange/en-US/6cb89070-6c17-4f80-8ad1-b4bfff8c8ed6/432-the-maximum-number-of-concurrent-connections-has-exceeded-a-limit-closing-trasmission-channel
http://social.technet.microsoft.com/Forums/exchange/en-US/62ccfbd1-9b1e-4e67-94be-692b725428a3/exchange-cas-array-exceeds-max-number-of-concurrent-connections?forum=exchange2010
Please reply me if you have any queries.
Thanks & Regards
S.Nithyanandham
Thanks S.Nithyanandham -
Unable to telnet and tftp to controller
hello experts!!!
5508 controller is at the headquarters which can be normally pinged, telnetted, http'd and tftp'ed....
at the remote site, controller can be pinged and http'ed but cannot be telnetted and tftp'ed.
there is a complete tracert from the remote site pc all the way to the controller.
from a switch at a remote site, the controller can be telnetted.
but from a pc on the remote site (which belongs to a remote site vlan), it is unable to telnet and tftp the controller.
all active components can be telnetted from the remote site, such as the core switches and routers at the headquearters, except the controller.
upgraded the controller code to 7.2.xxx in headquarters but still unable to telnet and tftp the controller from remote site.
is there any more settings on the controller for telnet and tftp?
what could be the problem why the controller is not available for telnet and tftp from the remote site?
thank you, experts, in advance for your replies!!!Hello, Leo!
See output of the command:
(Cisco Controller) >show network summary
RF-Network Name............................. GID2012
Web Mode.................................... Enable
Secure Web Mode............................. Enable
Secure Web Mode Cipher-Option High.......... Disable
Secure Web Mode Cipher-Option SSLv2......... Enable
OCSP........................................ Disabled
OCSP responder URL..........................
Secure Shell (ssh).......................... Enable
Telnet...................................... Enable
Ethernet Multicast Forwarding............... Disable
Ethernet Broadcast Forwarding............... Disable
AP Multicast/Broadcast Mode................. Unicast
IGMP snooping............................... Disabled
IGMP timeout................................ 60 seconds
IGMP Query Interval......................... 20 seconds
MLD snooping................................ Disabled
MLD timeout................................. 60 seconds
MLD query interval.......................... 20 seconds
User Idle Timeout........................... 28800 seconds
ARP Idle Timeout............................ 300 seconds
Cisco AP Default Master..................... Enabled
--More-- or (q)uit
AP Join Priority............................ Disable
Mgmt Via Wireless Interface................. Enable
Mgmt Via Dynamic Interface.................. Enable
Bridge MAC filter Config.................... Enable
Bridge Security Mode........................ EAP
Mesh Full Sector DFS........................ Enable
AP Fallback ................................ Enable
Web Auth Redirect Ports .................... 80
Web Auth Proxy Redirect ................... Disable
Web Auth Captive-Bypass .................. Disable
Web Auth Secure Web ....................... Enable
Fast SSID Change ........................... Disabled
AP Discovery - NAT IP Only ................. Enabled
IP/MAC Addr Binding Check .................. Enabled
CCX-lite status ............................ Disable
oeap-600 dual-rlan-ports ................... Disable
oeap-600 local-network ..................... Enable -
Unable to telnet or user disconnected
Hi,
It seems that every time a client/server application runs extensively on the Sun Solaris 7 server, users who are already connected to the server got disconnected or we're unable to telnet or ping the server (connection got timeout). I increased the pty's to 128 but still no luck. Traffic on the switch seems ok.
Any idea someone.?
Pls help
RalesAre you able to console to the access point? Do you have an ACL preventing telnet or HTTP access to the AP? Is there a chance that HTTP and telnet are disabled on the AP?
Mark -
hi.
i am able to ping my SLM224G2 switch but unable to telnet the switch.
pls. help me out.
JitendraI am not sure if the SLM224G2 if you can telnet the unit but if it does have that option usually you might have some enabled firewalls in the PC that is why you are unable telnet the unit. I tried to further look at either the user guide or datasheet for the SLM224G (anyway the SLM224G2 should belong to that family) and it doesn’t say that it has a telnet capability. I am honestly not familiar with this switch but I know the SRW series has telnet capabilities. I suggest try contacting CISCO tech support to report about this problem and seek their opinion about it.
-
Unable to telnet on command prompt for udp port 514, but able to on cmd for tcp port 514
I am unable to telnet on command prompt for udp port 514. But when I use packet snifer or wireshark I am able to see traffic going to the targetted server from udp port 514. I thought it might be a firewall issue blocking the port from communicating. But
I figured out that windows firewall is disabled. I am able to make similar connections on the cmd for tcp port 514.
I did a netstat -an and see that udp:514 is enabled and listening on the server.
What am I missing here?Telnet actually supports TCP only. You might want to try another tool as suggested here: http://serverfault.com/questions/263032/how-to-connect-to-a-udp-port-command-line
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile -
CSS11501 - Unable to Telnet to VRRP backup interface IP
Hi,
I have 2 units of Cisco CSS11501 which configured running on VRRP active/standby on 2 different VLAN (Circuit). When unit 1 is master unit, I am able to telnet to its circuit IP address, but unable to telnet to any circuit IP of backup unit.
Active unit configuration:
!************************** CIRCUIT **************************
circuit VLAN145
ip address 172.19.145.182 255.255.255.0
ip virtual-router 1 priority 101
ip redundant-vip 1 172.19.145.184
ip redundant-interface 1 172.19.145.183
circuit VLAN550
ip address 192.168.50.18 255.255.255.0
ip virtual-router 2 priority 101
ip redundant-vip 2 192.168.50.20
ip redundant-interface 2 192.168.50.19
!*************************** OWNER ***************************
owner ***
content ***
vip address 172.19.145.184
port 80
protocol tcp
add service ***
active
!*************************** GROUP ***************************
group ***
vip address 192.168.50.20
active
Backup unit configuration:
!************************** CIRCUIT **************************
circuit VLAN145
ip address 172.19.145.183 255.255.255.0
ip virtual-router 1 priority 90
ip redundant-interface 1 172.19.145.182
ip redundant-vip 1 172.19.145.184
circuit VLAN550
ip address 192.168.50.19 255.255.255.0
ip virtual-router 2 priority 90
ip redundant-vip 2 192.168.50.20
ip redundant-interface 2 192.168.50.18
!*************************** OWNER ***************************
owner ***
content ***
vip address 172.19.145.184
port 80
protocol tcp
add service ***
active
!*************************** GROUP ***************************
group ***
vip address 192.168.50.20
active
Please help!!
Regards,
Danny LimHi Marko,
That means I could not to configure redundant-interface as I have redundant-vip configured already?
Actually the topology is:
VLAN550 is connecting to server farm
VLAN145 is where user sitting
my current config :
circuit VLAN145
ip address 172.19.145.182 255.255.255.0
ip virtual-router 1 priority 101
ip redundant-vip 1 172.19.145.184
ip redundant-interface 1 172.19.145.183
ip critical-service 1 PING_DEFAULT_GATEWAY
circuit VLAN550
ip address 192.168.50.18 255.255.255.0
ip virtual-router 2 priority 101
ip redundant-vip 2 192.168.50.20
ip redundant-interface 2 192.168.50.19
ip critical-service 2 PING_DEFAULT_GATEWAY
!*************************** OWNER ***************************
owner HLRLDAP
content VIP_LDAP_16611
vip address 172.19.145.184
port 16611
protocol tcp
add service KPG-HV30-3
add service KPG-HV30-6
active
!*************************** GROUP ***************************
group Redundant_Server
vip address 192.168.50.20
active
So, I should have change my config like this:
CSS1
circuit VLAN145
ip address 172.19.145.182 255.255.255.0
ip virtual-router 1 priority 101
ip redundant-vip 1 172.19.145.184
ip redundant-interface 1 172.19.145.181
ip critical-service 1 PING_DEFAULT_GATEWAY
circuit VLAN550
ip address 192.168.50.18 255.255.255.0
ip virtual-router 2 priority 101
ip redundant-interface 2 192.168.50.20
ip critical-service 2 PING_DEFAULT_GATEWAY
CSS2
!************************** CIRCUIT **************************
circuit VLAN145
ip address 172.19.145.183 255.255.255.0
ip virtual-router 1 priority 90
ip redundant-interface 1 172.19.145.181
ip redundant-vip 1 172.19.145.184
ip critical-service 1 PING_DEFAULT_GATEWAY
circuit VLAN550
ip address 192.168.50.19 255.255.255.0
ip virtual-router 2 priority 90
ip redundant-interface 2 192.168.50.20
ip critical-service 2 PING_DEFAULT_GATEWAY -
Unable to telnet using saprouter.
Hi Guys,
I have a problem in using saprouter. When i m trying to edit the saprouttab I am getting a message that it is unable to open saprouter director. the thing is I dont have the dirctory /usr/sap/saprouter. I am using saprputer from exe folder. This is following error when i m reading the saprouter log.
this is saprouttab file
P * * *
P * * telnet
P * * 23
the following is the log from dev_rout log
trc file: "dev_rout", trc level: 1, release: "46D"
Tue Sep 20 14:15:10 2005
SAP Network Interface Router, Version 34, August 30 1999
command line arg 0: saprouter
command line arg 1: -r
ERROR => fopen ./saprouttab (2: No such file or directory) [nixxrout.c 266
6]
***LOG Q0I=> NiRRouttab: fopen (2: No such file or directory) [nixxrout.c 2667]
cannot open ./saprouttab: all routing disabled!!!
Could not open permission table
dev_rout: END
Is there any way to change the path in SAP so that it is directed to /usr/sap/SID/SYS/exe instead of /usr/sap/saprouter which i dont have..
Please reply ASAP this is very urgent.
thank u,
Irshad MohammedHi Guys,
I m getting this log file I think there is some problem here
Fri Feb 15 10:23:49 2008 INIT_LOGFILE
Fri Feb 15 10:23:49 2008 READ ROUTTAB /sapmnt/DEV/exe/saprouttab o.k.
Fri Feb 15 10:24:49 2008 CONNECT FROM C0, host 127.0.0.1 (loopback)
Fri Feb 15 10:24:49 2008 SEND INFO TO C0
Fri Feb 15 10:24:49 2008 DISCONNECT C0, host 127.0.0.1 (loopback)
Fri Feb 15 14:54:20 2008 CONNECT FROM C0, host 127.0.0.1 (loopback)
Fri Feb 15 14:54:20 2008 DISCONNECT C0, host 127.0.0.1 (loopback)
Fri Feb 15 14:54:20 2008 SHUTDOWN -
Unable to telnet to port 25 from within or without the network.
Hi there, I have been wrestling with firewall and mail settings in Server Admin to enable mail services for a client and could use some assistance as I am new to mail administration on OS X.
I am trying to isolate whether or not I am being blocked by the firewall or by erroneous setup in Mail Settings.
The firewall service on the network "any" has a check for Mail: SMPT for both TCP and UPD on the "Services" tab.
At this point I am just working with SMTP for outbound mail only. I have a suspicion that I am not setting the parameters for local internet domain name, and internet host name correctly; or that the settings I have are correct, but not valid.
The hostname of the server is ##-###-##-###.atgi.net, where ## correspond with the numbers in each octet of the IP address. The MX record is pointing to smtp.CLIENT'SDOMAN.com. (where CLIENTS'SDOMAIN is the actual domain for this company) (Registrar is Network Solutions, I do not have DNS enabled on this server)
SMTP settings are as follows:
Enable SMTP is checked
Allow Incoming mail is not checked
domain name is: ##-###-##-###.atgi.net
Host Name is: smtp.CLIENT'SDOMAIN.com
Everything else in mail settings not active.
Here are the SMTP log entires when I sart mail service:
Oct 9 00:02:32 66-182-60-162 postfix/postfix-script: stopping the
Postfix mail system
Oct 9 00:02:32 66-182-60-162 postfix/master[13377]: terminating on signal 15
Oct 9 00:02:32 66-182-60-162 postfix/master[14147]: daemon started --
version 2.1.5
Questions:
1. Shouldn't I be able to see smptd running at this point?
2. Telnet to port 25 on the server itself and outside the network is rejected, wth?
3. Should I change the local internet domain ##-###-##-### to be the client's actual domain name?
Any help that anyone could provide would be greatly appreciated. If I can provide more supporting documentation, please just let me know what would be useful. I am quite new to OS X / Darwin, more comfortable with linux.
Thanks in advance$ sudo postconf -n
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter =
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
enableserveroptions = yes
html_directory = no
inet_interfaces = localhost
localrecipientmaps = proxy:unix:passwd.byname $alias_maps
luser_relay =
mail_owner = postfix
mailboxsizelimit = 0
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
messagesizelimit = 10485760
mydestination = $myhostname,localhost.$mydomain
mydomain = xpressprintnow.com
mydomain_fallback = localhost
myhostname = smtp.xpressprintnow.com
mynetworks = 127.0.0.0/8
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpdclientrestrictions = hash:/etc/postfix/smtpdreject
smtpdenforcetls = no
smtpdpw_server_securityoptions = plain
smtpdrecipientrestrictions = permitsasl_authenticated,permit_mynetworks,reject_unauthdestination,permit
smtpdsasl_authenable = yes
smtpdtls_certfile = /etc/certificates/Default.crt
smtpdtls_keyfile = /etc/certificates/Default.key
smtpduse_pwserver = yes
smtpdusetls = no
unknownlocal_recipient_rejectcode = 550
virtualmailboxdomains =
virtual_transport = virtual -
Building configuration...
Current configuration : 3351 bytes
! No configuration change since last restart
version 15.1
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
boot-start-marker
boot-end-marker
logging buffered 51200 warnings
no aaa new-model
memory-size iomem 10
crypto pki token default removal timeout 0
crypto pki trustpoint TP-self-signed-1515919628
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1515919628
revocation-check none
rsakeypair TP-self-signed-1515919628
crypto pki certificate chain TP-self-signed-1515919628
certificate self-signed 01
ip source-route
ip dhcp excluded-address 10.10.10.1
ip dhcp pool ccp-pool
import all
network 10.10.10.0 255.255.255.248
default-router 10.10.10.1
lease 0 2
ip cef
no ip domain lookup
ip domain name yourdomain.com
no ipv6 cef
license udi pid CISCO881-K9 sn FCZ1639C2EX
interface FastEthernet0
no ip address
interface FastEthernet1
no ip address
interface FastEthernet2
no ip address
interface FastEthernet3
no ip address
interface FastEthernet4
ip address 10.1.1.245 255.255.255.0
ip access-group KARIDGE in
ip access-group KARIDGE out
duplex auto
speed auto
interface Vlan1
description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$
ip address 100.241.190.125 255.255.255.240
ip tcp adjust-mss 1452
ip forward-protocol nd
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip route 0.0.0.0 0.0.0.0 100.241.190.113
ip access-list extended KARIDGE
permit ip host 10.1.1.6 any
permit ip any host 10.1.1.6
access-list 23 permit 10.10.10.0 0.0.0.7
no cdp run
line con 0
login local
line aux 0
line vty 0 4
privilege level 15
login local
transport input telnet ssh
endCan you connect throght SSH? Which is the error message that you see?
Looking at your configuration file I don´t see the lines "enable secret" neither "enable password". If you don´t define them you can´t connect remotely to any device. -
After executing the following command: 'clear tcp tcplist', I am no longer able to telnet to the 6513 switch (CatOS). I would like to restore the telnet functionality to this switch. Does anyone have an ideas. I have searched everywhere for a resolution. Thanks.
Hello,
the command you mention drops all TCP connections. Where are you trying to telnet from ? Check the line status of that device with the 'show line' command, and try to clear all lines which have an *.
Regards,
GP -
Unable to telnet the cisco 2900
Hi,
I am trying to telnet to cisco 2900 switch. I believe there is a VTY password configured. When I give the pasword. I am getting the below error.
"Local flow control off"
"User Access Verification
Password: Connection closed by foreign host."
Appreciate you help help.
Thanks & Regards
RangaThanks for response. We does have acces to only from one machine in the network. And I got the configuration that is in backup server. Here is the configuration of login access. I believe with the below configuration might be same problem when we console the switch.
Line-Line con 0
line con 0
session-timeout 15
password*****
no vacant-message
login
transport input none
stopbits 1
Line-Line vty 0 4
line vty 0 4
session-timeout 15
access-class XX in
exec-timeout 15 0
password*****
no vacant-message
login
Line-Line vty 5 15
line vty 5 15
access-class XX in
login
Maybe you are looking for
-
HD Steaming video now choppy after upgrading to 10.6
Back when I was running 10.5 I could stream HD videos from Youtube, Hulu, etc without problems. After upgrading to 10.6 the lower resolution video plays normally, but once you go to 720p+ the processor usage climbs and the video starts to stutter. I
-
Trouble connecting playbook to windows PC when using AVG Internet Security and USB cable ?
I have spent ages trying to get my PC (windows 7 64bit ) to talk to the Playbook. I found the following: Windows device manager sees the playbook and will let me back up and restore but not to see the files on the Playbook. Desktop software says prob
-
Shipment cost - condition type item level
hey all , i have in 1 pricing procedure 4 condition types . 3 of them at delivery level and 1 at shipment level . i created a requirement that activate the delivery level condition (3 conditions) OR the shipment condition ( 1 condition ) . the shipme
-
Old iMovie projects have purple background!!!
This is a strange one... I recently upgraded from iMovie 4.01 to iMivie HD 6.03. I opened an old project from mu 4.01 version, and although all the data and edits are correct and identical, all the color is wrong. There is no moving video in this old
-
Newb, needs advice about landing page
Hey guys, I am very new to Dreamweaver. I was asked by my boss to create a landing page. She asked me because I am the graphic designer for all print material. She is well aware (as am I...lol) I am no web developer....But I would LOVE to learn and I