Unable to telnet Solaris 10 Box

Milestone service is seems to be offline.
I have 02/05 release of solaris 10.
But many times i have face this problem,but no solution found.
Please guide me how to solve this problem.
regards..
Sunny

Never heard of milestone/service. Please give us the entire output from svcs -l <service> where 'service' is naturally the fmri of the milestone you described.

Similar Messages

Unable to Telnet / SSH to a particular cisco switch

Hello,
I have an unusual issue that I just can't seem to track down. We have a Windows Server 2008 R2 box that is unable to telnet or ssh to one switch in our network.
Server IP: 10.0.0.74
Cisco Switch IP: 10.1.0.7
I am able to access all other switches/routers on the 10.1.0.x network, but not this one. I ping and tracert by ip address and name.
We have a number other servers on our network and they all can access this switch
Example:
a. 10.0.0.73 can telnet/ssh to 10.1.0.7
b. 10.0.0.72 can telnet/ssh to 10.1.0.7
c. 10.0.0.50 can telnet/ssh to 10.1.0.7
d. My workstation (10.0.250.213) can telnet/ssh to 10.1.0.7
If anyone can help with troubleshooting further, I would greatly appreciate it.

Thanks for the reply Philippe! Here is the route print
IPv4 Route Table
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 10.0.0.2 10.0.0.74 266
10.0.0.0 255.255.0.0 On-link 10.0.0.74 266
10.0.0.74 255.255.255.255 On-link 10.0.0.74 266
10.0.255.255 255.255.255.255 On-link 10.0.0.74 266
10.10.0.0 255.255.0.0 On-link 10.0.0.74 266
10.10.0.74 255.255.255.255 On-link 10.0.0.74 266
10.10.255.255 255.255.255.255 On-link 10.0.0.74 266
127.0.0.0 255.0.0.0 On-link 127.0.0.1 306
127.0.0.1 255.255.255.255 On-link 127.0.0.1 306
127.255.255.255 255.255.255.255 On-link 127.0.0.1 306
224.0.0.0 240.0.0.0 On-link 127.0.0.1 306
224.0.0.0 240.0.0.0 On-link 10.0.0.74 266
255.255.255.255 255.255.255.255 On-link 127.0.0.1 306
255.255.255.255 255.255.255.255 On-link 10.0.0.74 266
===========================================================================
Persistent Routes:
Network Address Netmask Gateway Address Metric
0.0.0.0 0.0.0.0 10.0.0.2 Default
===========================================================================
IPv6 Route Table
===========================================================================
Active Routes:
If Metric Network Destination Gateway
1 306 ::1/128 On-link
1 306 ff00::/8 On-link
===========================================================================
Persistent Routes:
None
Firewall is disabled and there is no active antivirus. Im pretty sure port blocking is not the issue. I am able to ssh and telnet from this box to every other switch/router in our network.
This server has Solarwinds on it and tracks the health of our network (servers, routers, switches, ups, ect.). The only reason we noticed an issue is because it stopped backing up the config for this particular switch. All other switchs/routers
config is backed up to this server every morning at 2:00AM.
With solarwinds, this server is also able to communicate with this switch via snmp / icmp and ping.
Thanks again for the help!

Unable to telnet or user disconnected

Hi,
It seems that every time a client/server application runs extensively on the Sun Solaris 7 server, users who are already connected to the server got disconnected or we're unable to telnet or ping the server (connection got timeout). I increased the pty's to 128 but still no luck. Traffic on the switch seems ok.
Any idea someone.?
Pls help
Rales

Are you able to console to the access point? Do you have an ACL preventing telnet or HTTP access to the AP? Is there a chance that HTTP and telnet are disabled on the AP?
Mark

10.6.8 Unable to click in text boxes or on utility menu at top of screen, Dock icons lead to containing folders instead of programs

As stated in my subject, periodically I become unable to click in text boxes (in my browser, addresses/search) and am also unable to click on the various icons in the utility bar at the top of the screen such as bluetooth and volume control etc. Also, when this occurs if I click on Applications or one of my Dock icons it leads to the containing folder as a destination instead of the program itself. It resolves itself after awhile, but I can fix it immediately by unplugging my mouse and plugging it back in. At that point, everything works fine as if nothing ever happened. What is strange to me is that it fazes in and out, while being able to return to being fully operational.

Have you tried adding the following css selector to your css file.
.nav-bar a {
    text-align: center;
or insert it in the <style> tag you have on the page:
<style type="text/css">
body {
    margin-left: 200px;
.n {
    text-align: center;
.nav-bar a {
    text-align: center;
</style>

Solaris 8 compiled binaries on solaris 10 box

Hi all,
I have a plain C code which compiles and runs fine on my solaris 8 box. I have to deploy the compiled binaries (on soalris 8) on a different machine which has solaris 10 installed.
My application uses libqt-ms.so.3, libqutil.so.1.0.0, libjpeg.so.6, libstdc++.so.2.10.0, posix threads and tcp/ip sockets.
Will this cause any problems. or will i have to make a separate binary for solaris 10. If that is the case will i need new library files or the current one will work fine
Best Regards,
Faran

well I have tried it actually. and the behavior is weird. On my solaris 8 box. Every thing works perfectly fine. But due to some reason on solaris 10 machine the values i transmit over the tcp socket totally change. i send a msgCode = 1 , 2, or 3 ... but on the other end, which is a windows machine i get strange values 210, 10, 35 49 etc etc ... is this due to version problem.

My Exceed is not working with Solaris 9 Box

What are the neccessary changes do i need to make on solaris 9 box in order to see the Solaris 9 screen on my Window XP desktop. I have enabled the following setting such as
./dtlogin -daemon enable
But still it keep XDMCP timed out.
Any body has any idea about it.
Thanks
-Ad

IS there any firewall b/w Solaris and Xwindows client
you need to open ports if firewall in b/w them
X/XDMCP
Assume that the Choser and/or X Server are running at <chooser> and the Display Manager/X applications are running at <apps>.
#ACTION SOURCE DESTINATION PROTO DEST PORT(S)
ACCEPT <chooser> <apps> udp 177 #XDMCP
ACCEPT <apps> <chooser> tcp 6000:6009 #X Displays 0-9

Adding eSAN storage to a Solaris 9 box, with MPXIO and Qlogic HBAs

I recently added a few SAN drives to a Solaris-9 box and enabled MPXIO. I noticed that after you install the qlc drivers and do a reconfigure boot you see two additional devices besides the disks. These additional devices are very small and present themselves as disks. See example below
12. c5t50060482D5304D88d0 <EMC-SYMMETRIX-5772 cyl 4 alt 2 hd 15 sec 128>
/pci@8,700000/fibre-channel@4,1/fp@0,0/ssd@w50060482d5304d88,0
13. c7t50060482D5304D87d0 <EMC-SYMMETRIX-5772 cyl 4 alt 2 hd 15 sec 128>
/pci@8,700000/fibre-channel@5,1/fp@0,0/ssd@w50060482d5304d87,0
14. c8t60060480000190103862533032384632d0 <EMC-SYMMETRIX-5772 cyl 37178 alt 2 hd 60 sec 128>
/scsi_vhci/ssd@g60060480000190103862533032384632
15. c8t60060480000190103862533032384541d0 <EMC-SYMMETRIX-5772 cyl 37178 alt 2 hd 60 sec 128>
/scsi_vhci/ssd@g60060480000190103862533032384541
notice the difference in the number of cylenders. I have a couple of questions about these devices
1. What are these. The SAN storage is EMC Symmetrix
2. I see the following errors in the /var/adm/messages any time a general disk access command is run, such as format. Should I be concerned
Feb 4 13:05:35 Corrupt label; wrong magic number
Feb 4 13:05:35 scsi: WARNING: /pci@8,700000/fibre-channel@4,1/fp@0,0/ssd@w50060482d5304d88,0 (ssd21):
Feb 4 13:05:35 Corrupt label; wrong magic number
Feb 4 13:05:35 scsi: WARNING: /pci@8,700000/fibre-channel@5,1/fp@0,0/ssd@w50060482d5304d87,0 (ssd28):
Feb 4 13:05:35 Corrupt label; wrong magic number
Feb 4 13:05:35 scsi: WARNING: /pci@8,700000/fibre-channel@5,1/fp@0,0/ssd@w50060482d5304d87,0 (ssd28):
Feb 4 13:05:35 Corrupt label; wrong magic number

Gate keepers from EMC Storage, is normal.

DNS requests from Solaris 10 box to Bind/MySQL DNS server fail

We have some servers running solaris 9 and some running solaris 10. We also have a DNS server setup running BIND with the MySQL backend. When I query the DNS server from our solaris 9 boxes, they always work just fine. However, when I query the DNS server from our solaris 10 boxes, they always fail. Queries to other DNS servers from the Solaris 10 boxes work just fine - they only fail when being sent to this particular DNS server. Here's exactly what I'm doing:
ON SOLARIS 9 BOX:
bash-3.00$ nslookup google.com calo-sunset
Server: calo-sunset
Address: <IP_OF_DNS_SERVER>#53
Non-authoritative answer:
Name: google.com
Address: 64.233.187.99
Name: google.com
Address: 72.14.207.99
Name: google.com
Address: 209.85.171.99
ON SOLARIS 10 BOX:
bash-2.05$ nslookup google.com calo-sunset
*** Can't find server name for address <IP_OF_DNS_SERVER>: Non-existent host/domain
*** Default servers are not available
In the case of the SOLARIS 10 box, <IP_OF_DNS_SERVER> is correct - it knows the IP address of the DNS server, but apparently it doesn't recognize that it's actually a DNS server.
I am utterly perplexed by this. It seems to me that a DNS request is a DNS request, regardless of your OS. Clearly something is different from Solaris 9 to Solaris 10 though because the requests fail on all of our solaris 10 boxes, and they succeed on all of our Solaris 9 boxes. Incidentally, dig requests from the Solaris 10 box also fail, where they succeed on the Solaris 9 boxes.
I don't really know what other information I could offer that might be useful. If you have any information at all about this or ideas on what I might try to troubleshoot/fix it, I'd love to hear it. Thanks in advance.

First off, I am an idiot. I got this entire post backwards. The fact is that the DNS requests work swimmingly well on our Solaris 10 boxes. They fail on our Solaris 9 boxes. I don't know how I managed to read this post all of these times and not notice that I got that backwards. Nice.
In any case, I've found the problem. It was non-trivial to me because I am not terribly familiar with the inner-workings of DNS. To those who are, it may seem painfully obvious. To me it certainly was not.
The problem was that the DNS server (BIND 9 with MySQL backend) did not contain a reverse DNS entry for itself. Apparently this is a big problem for Solaris 9. I got a hint that this might be the cause when I turned on verbose debugging info when I ran nslookup (nslookup -d2). I had to add the PTR record for the DNS server itself. I don't know why Solaris 9 would require that a DNS server contain reverse DNS information about itself, but sure enough it does. As soon as I added that info, the Solaris 9 boxes were able to successfully query the DNS server. Very odd.
Anyway, I doubt anyone else will come across this problem, but if you do, now you know something that might fix it.
Edited by: dprater on Oct 7, 2008 8:09 PM

Unable to close Modal dialog box

Hello Friends,
I am displaying a list in a Modal Dialog box. When I try to close the Modal dialog box. It is not getting closed.I have defined a gui status for this modal dialog box. PBO and PAI Coding is given below .
module STATUS_0300 output.
SET PF-STATUS 'STATUS_300'.
SUPPRESS DIALOG.
LEAVE TO LIST-PROCESSING AND RETURN TO SCREEN 0 .
IF p_week IS NOT INITIAL.
    WRITE : text-009 COLOR 1.
ENDIF.
IF p_month IS NOT INITIAL.
    WRITE : text-010 COLOR 1.
ENDIF.
LOOP AT g_t_wkmon_error INTO g_s_wkmon_error.
    WRITE :/ g_s_wkmon_error-matnr,
             g_s_wkmon_error-period,
             g_s_wkmon_error-quantity.
ENDLOOP.
LEAVE SCREEN.
endmodule.
module USER_COMMAND_0300 input.
CASE ok_code.
WHEN 'OK'.
   LEAVE PROGRAM.
ENDCASE.
endmodule.
Thanks in Advance.
Hari

Hi,
Check the below thread
Re: Unable to close modal dialog box
" Make sure you select the Radio Button DIalog BOX Typ while creating the Status in PBO
You can use SET SCREEN 0 In the above Thread
MODULE user_command_0100 INPUT.
CASE ok.
    when 'CANCEL'. " You Standard GUI options shown in The GUI Screen
      SET SCREEN 0.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
module STATUS_0100 output.
SET PF-STATUS 'ABC'. " This is of type Dailog Box type
* SET TITLEBAR 'xxx'.
endmodule.                 " STATUS_0100 OUTPUT
Hope this would resolve your Issue.
Cheerz
Ram
Edited by: Ramchander Krishnamraju on Apr 16, 2010 1:16 PM

Unable to Telnet...............

Posted by: vatsey.sharad - Engineer, HCL Comnet
Jun 6, 2008, 2:09am PST
Hi,
I have two IP's Configured on my Cisco 2800. 1.1.1.1 - Loopback and 2.2.2.2 on Fast Ethernet. Both IP's are pingable across the WAN. And telnet to loopback IP is working fine. However I am unable to telnet to Fast Ethernet IP. The error message while trying to telnet to Fast Ethernet IP is: "Could not open connection to the host, on port 23: Connect failed". I tried to debug telnet on the router. The Debug output for unsuccessful telnet is as follows:
Telnet194: recv SB NAWS 139 24
However for a successful telnet session, the output is:
Telnet195: 1 1 251 1
TCP195: Telnet sent WILL ECHO (1)
Telnet195: 2 2 251 3
TCP195: Telnet sent WILL SUPPRESS-GA (3)
Telnet195: 80000 80000 253 24
TCP195: Telnet sent DO TTY-TYPE (24)
Telnet195: 10000000 10000000 253 31
TCP195: Telnet sent DO WINDOW-SIZE (31)
TCP195: Telnet received DO ECHO (1)
TCP195: Telnet received DO SUPPRESS-GA (3)
TCP195: Telnet received WILL TTY-TYPE (24)
Telnet195: Sent SB 24 1
TCP195: Telnet received WILL WINDOW-SIZE (31)
Telnet195: recv SB NAWS 110 52
Telnet195: recv SB 24 0 ANSI
There are no ACL's or firewalls involved in the picture.

Sharad
How many forums did you post this question in? I have already found it in 2 other forums.
HTH
Rick

Unable to telnet to LINUX desktop

I've installed Linux 2.6.9-42.0.0.0.1 ( downloaded from oracle's website) and I'm unable to telnet to this machine from my laptop.
I get this error
C:\Documents and Settings\Administrator>telnet oragrid
Connecting To oragrid...Could not open connection to the host, on port 23: Connect failed
This is my first linux trial so I guess you need to tell me from scratch regarding starting the telnet.
Thanks
Mukul

Mukul,
Search this forum for "telnet". You'll see threads such as this one:
Re: FTP & TELNET in Enterprise Linux
Bottom line, I recommend you use ssh rather than telnet. If you're connecting from Windows, download Putty, for example.
Sergio

Thanks Sun for handcuffing our Solaris 10 boxes

You guys have me in a major holding pattern. I have a Solaris 10 box that was running the SUC (the acronym is funny) preview release without problems. When updating to the 1.0 release, I can not load updates. The system can not re-register becuase I get the error "Sun Subscription Key already in use". This machine is supposed to be my patch proxy for 25 other machines, as it was with Solaris 9. We also can not download patch clusters because of your requirement to register Solaris 10 machines, and guess what, can't do that either. I have a Silver Spectrum contract and expect you to honor the terms of the contract with the necessary support to fix this issue so I can patch my Solaris 10 machines. Please reply or resolve this issue.

Hello. I can appreciate your frustration. As I cannot see your contact details I cannot contact you directly but please note that we are aware of your issue and are pursuing it right now. I am working with our entitlement team and Peter whom I believe are working with within the Solution center. We should be contacting you soon with more information. Thank you for your patience.

HT1526 trash from my segate external hard disk.But i am unable to empty my trash box ,getting an error(Error code -36)how to trash?

I had moved some folder to trash from my segate external hard disk.But i am unable to empty my trash box ,getting an error:The Finder can’t complete the operation because some data in “” can’t be read or written. (Error code -36): pls advise,how to trash

Hi, what format is the external drive?
Well, in pure Apple File System talk... -36
ioErr
I/O error (bummers)
Not very helpful, but generally means a Drive quit being Readable or Writable since starting the operation...
http://fuzzy.wordpress.com/2006/12/10/ioerror-36/
The other -36 is a Windows/SMB issue.
Solving Trash Problems...
http://thexlab.com/faqs/trash.html

Unable to telnet to localhost after CU5

Hi
We upgraded E2013 to CU5 on Sat 13 - On Thu 18 at 9:12 all 4 CAS servers stopped processing mail
error from smarthost:
421 4.3.2 The maximum number of concurrent connections has exceeded a limit, closing transmission channel
unable to telnet locally: telnet localhost 25
421 4.3.2 Service not available
netstat -an | find "25" shows port is listening
Test-SmtpConnectivity shows success
Any ideas appreciated
shapi

Hi ,
Please check the below mentioned links
http://social.technet.microsoft.com/Forums/exchange/en-US/6cb89070-6c17-4f80-8ad1-b4bfff8c8ed6/432-the-maximum-number-of-concurrent-connections-has-exceeded-a-limit-closing-trasmission-channel
http://social.technet.microsoft.com/Forums/exchange/en-US/62ccfbd1-9b1e-4e67-94be-692b725428a3/exchange-cas-array-exceeds-max-number-of-concurrent-connections?forum=exchange2010
Please reply me if you have any queries.
Thanks & Regards
S.Nithyanandham
Thanks S.Nithyanandham

Unable to telnet and tftp to controller

hello experts!!!
5508 controller is at the headquarters which can be normally pinged, telnetted, http'd and tftp'ed....
at the remote site, controller can be pinged and http'ed but cannot be telnetted and tftp'ed.
there is a complete tracert from the remote site pc all the way to the controller.
from a switch at a remote site, the controller can be telnetted.
but from a pc on the remote site (which belongs to a remote site vlan), it is unable to telnet and tftp the controller.
all active components can be telnetted from the remote site, such as the core switches and routers at the headquearters, except the controller.
upgraded the controller code to 7.2.xxx in headquarters but still unable to telnet and tftp the controller from remote site.
is there any more settings on the controller for telnet and tftp?
what could be the problem why the controller is not available for telnet and tftp from the remote site?
thank you, experts, in advance for your replies!!!

Hello, Leo!
See output of the command:
(Cisco Controller) >show network summary
RF-Network Name............................. GID2012
Web Mode.................................... Enable
Secure Web Mode............................. Enable
Secure Web Mode Cipher-Option High.......... Disable
Secure Web Mode Cipher-Option SSLv2......... Enable
OCSP........................................ Disabled
OCSP responder URL..........................
Secure Shell (ssh).......................... Enable
Telnet...................................... Enable
Ethernet Multicast Forwarding............... Disable
Ethernet Broadcast Forwarding............... Disable
AP Multicast/Broadcast Mode................. Unicast
IGMP snooping............................... Disabled
IGMP timeout................................ 60 seconds
IGMP Query Interval......................... 20 seconds
MLD snooping................................ Disabled
MLD timeout................................. 60 seconds
MLD query interval.......................... 20 seconds
User Idle Timeout........................... 28800 seconds
ARP Idle Timeout............................ 300 seconds
Cisco AP Default Master..................... Enabled
--More-- or (q)uit
AP Join Priority............................ Disable
Mgmt Via Wireless Interface................. Enable
Mgmt Via Dynamic Interface.................. Enable
Bridge MAC filter Config.................... Enable
Bridge Security Mode........................ EAP
Mesh Full Sector DFS........................ Enable
AP Fallback ................................ Enable
Web Auth Redirect Ports .................... 80
Web Auth Proxy Redirect ................... Disable
Web Auth Captive-Bypass .................. Disable
Web Auth Secure Web ....................... Enable
Fast SSID Change ........................... Disabled
AP Discovery - NAT IP Only ................. Enabled
IP/MAC Addr Binding Check .................. Enabled
CCX-lite status ............................ Disable
oeap-600 dual-rlan-ports ................... Disable
oeap-600 local-network ..................... Enable

Unable to telnet Solaris 10 Box

Similar Messages

Maybe you are looking for