Unable to test new isight due to "insufficient bandwidth"

My father just bought the new imac and sent me a isight camera.
We tried to test it today and kept getting the "insufficient bandwidth" message
Both him and I are running 10.4.3 and have cable internet.
We both ran speed tests and our connection speeds are great.
We both turned off our firewalls and that failed to help.
We made sure our speed lined up with our streaming media preferences in both ichat and quicktime.
Neither of us have Virex.
I am at a loss.
can anyone give me a suggestion?

Hi Portland,
Most likely this is due to two device doing DHCP
DHCP is a way of the routing device giviing out IP addresses to the other devices on the LAN.
A modem will not pass on the Public IP address if it is DHCP issued unless it is specifically set to Bridge or Pass Through mde.
A router howver will pass oon previous IP addresses and add in it's own. This can give the end computer two IP addresses and confuses iChat. (you can only see one) (subnets)
Another problem can be if both devices do Port Forwading or any other form of NAT (Network Address Translation). If there are two lots of this the ports get messed up and no chat happens.
Your dad may need to learn a bit about LAN networking to enable him to use the modem and router with iChat.
Ralph

Similar Messages

Oracle Discoverer unable to open the workbook due to insufficient Permissio

I have an error message when I try to open a workbook with some worksheet.
( It's working fine with only one Worksheet)
Any idea ?

Well here's how it's supposed to work.
Step 1: Create workbook A with 5 reports (5 worksheets)
Step 2: Go into Disco Admin and make sure each business area where the folder(s) referred to in the step 1 can be seen by each user you're sharing the workbook with (security). For example, if worksheet 1 accesses business area: GL_Stuff, then security on GL_Stuff must be with all 5 users you'll share the report with.
Step 3. Share workbook A with the 5 users (via Plus or Desktop where you created the workbook).
Step 4. All users can see and run the workbook / worksheet.
Questions:
1. I don't know what you mean in your Step 3. There's no permissions at this point. What you do is give read to ALL tables / views, etc. to the owner of the EUL. Then either the owner of the EUL (or another user who has been given admin privs) controls security to other roles via the Tools-> Security window in Admin.
2. Are you 5 worksheets based on the same business area or are they going to different business areas. No problem if going to different ones, but you must make sure security for sharing with the other users / roles is for each business area they will be using to retrieve data from the folder and therefore the underlying view / table / sql statement.
Russ

Insufficient bandwidth to stream HD video

When using Amazon Prime to stream HD video content, I now receive a recommendation that suggests watching my HD content in SD due to INSUFFICIENT BANDWIDTH. Is this a fault of the AppleTV I own (2nd generation), my Airport Extreme router, my Motorola SB6120 cable modem, or my Comcast Professional Tier internet service. I've read that Comcast and others may be the source of this problem related to Netflix, Amazon, and other content providers. I need to know what to do to correct the problem, if there is a solution.

Check speedtest.net to see what your current connection is. Check that against the plan you're paying for. Is it the same, or close? Note: HD streaming needs at least 6mbps.

Unable to update Firefox on Mac OS X 10.5.8 due to insufficient priveledges, but I'm not sure what that means?

Hello,
I went to upgrade my version of Firefox and was able to download the newer version, but when I went to install it, the system asked if I wanted to replace the old with the new (the only option given), and when I said 'yes' the system popped up with "you are unable to do this because you have insufficient privileges." Not sure what that means. I have been able to download other things just fine.

If there are problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the disk image (dmg) file to the desktop
*Firefox 10.0.x: http://www.mozilla.org/en-US/firefox/all.html
*Trash the current Firefox application to do a clean (re-)install
*Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data if you uninstall and (re)install Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox

2960X 15.02(EX5) %AAA-3-ACCT_LOW_MEM_UID_FAIL:AAA unable to create UID for incoming calls due to insufficient processor memory.

Deployed four 2960X switches in a stack. All okay for about one month then tried to web browse for the first time via firefox which partially displayed the page. I assumed this was a browser error. So tried Chrome then IE which both failed. Chrome was a bad display and IE fails to connect.
After this, I could not telnet or ssh. Plugged into the console and immediately started receiving:
%AAA-3-ACCT_LOW_MEM_UID_FAIL: AAA unable to create UID for incoming calls due to insufficient processor memory
%% Low on memory; try again later
I am unable to log in. I have a TAC case logged but the first step to try is a reboot which will be difficult until I can get a maintenance window. When I do get a maintenance window, I would also like to deploy a fix such as a different version of code or a work-around cofig command. I don't mind disabling HTTP.
Any suggestions?

I am currently working with TAC
The switches failed about 18 hours later and had to be rebooted to get back up. Now that I have console/telnet access, I can see the memory being depleted mostly by the Auth Manager process at about the same rate as free memory is dropping.
SW13#sho proc mem sort | i Auth Manager
191   0 177721332   95004616   34757416          0          0 Auth Manager
SW13#sho proc mem sort | i Auth Manager
191   0 177754888   95025696   34759780          0          0 Auth Manager
SW13#sho proc mem sort | i Auth Manager
191   0 177774316   95037928   34761056          0          0 Auth Manager
SW13#sho proc mem sort | i Auth Manager
191   0 177799720   95053940   34762888          0          0 Auth Manager
SW13#sho proc mem sort | i Auth Manager
191   0 177824976   95069732   34764696          0          0 Auth Manager
SW13#
SW13#
SW13#sho proc mem sort | i Processor
Processor Pool Total: 442796836 Used: 103448576 Free: 339348260
SW13#sho proc mem sort | i Processor
Processor Pool Total: 442796836 Used: 103454416 Free: 339342420
SW13#sho proc mem sort | i Processor
Processor Pool Total: 442796836 Used: 103455860 Free: 339340976
SW13#sho proc mem sort | i Processor
Processor Pool Total: 442796836 Used: 103459236 Free: 339337600
SW13#sho proc mem sort | i Processor
Processor Pool Total: 442796836 Used: 103461040 Free: 339335796

The server was unable to process the request due to an internal error.

Properties set in my project are below
namespace EmployeeService
public class Employee
private int _Id;
private string _Name;
private string _Gender;
private DateTime _DateofBirth;
public int Id
get { return _Id; }
set { _Id = value; }
public string Name
set { _Name = value; }
get { return _Name; }
public string Gender
set { _Gender = value; }
get { return _Gender; }
public DateTime DateofBirth
set { _DateofBirth = value; }
get { return _DateofBirth; }
This is the service i have developed in my project
namespace EmployeeService
// NOTE: You can use the "Rename" command on the "Refactor" menu to change the class name "Service1" in both code and config file together.
public class EmployeeService : IEmployeeService
public Employee GetEmployee(int Id)
Employee objemp = new Employee();
string cs = ConfigurationManager.ConnectionStrings["DBCS"].ConnectionString;
using (SqlConnection con = new SqlConnection(cs))
SqlCommand cmd = new SqlCommand("spGettblEmployeewcf", con);
cmd.CommandType = CommandType.StoredProcedure;
SqlParameter Idparameter = new SqlParameter();
Idparameter.ParameterName = "@Id";
Idparameter.Value = Id;
cmd.Parameters.Add(Idparameter);
con.Open();
SqlDataReader dr = cmd.ExecuteReader();
while (dr.Read())
objemp.Id = Convert.ToInt32(dr["Id"]);
objemp.Name = dr["Name"].ToString();
objemp.Gender = dr["Gender"].ToString();
objemp.DateofBirth = Convert.ToDateTime(dr["DateofBirth"]);
return objemp;
public void SaveEmployee(Employee objemp)
string cs = ConfigurationManager.ConnectionStrings["DBCS"].ConnectionString;
using (SqlConnection con = new SqlConnection(cs))
SqlCommand cmd = new SqlCommand("spInsertEmployeewcf", con);
cmd.CommandType = CommandType.StoredProcedure;
SqlParameter ParameterId = new SqlParameter()
Value = objemp.Id,
ParameterName = "@Id"
cmd.Parameters.Add(ParameterId);
SqlParameter ParameterName = new SqlParameter()
Value = objemp.Name,
ParameterName = "@Name"
cmd.Parameters.Add(ParameterName);
SqlParameter ParameterGender = new SqlParameter()
Value = objemp.Gender,
ParameterName = "@Gender"
cmd.Parameters.Add(ParameterGender);
SqlParameter ParameterDateofBirth = new SqlParameter()
Value = objemp.DateofBirth,
ParameterName = "@DateofBirth"
cmd.Parameters.Add(ParameterDateofBirth);
con.Open();
cmd.ExecuteNonQuery();
The Service Contract code is
namespace EmployeeService
// NOTE: You can use the "Rename" command on the "Refactor" menu to change the interface name "IService1" in both code and config file together.
[ServiceContract]
public interface IEmployeeService
[OperationContract]
Employee GetEmployee(int Id);
[OperationContract]
void SaveEmployee(Employee objemp);
// TODO: Add your service operations here
// Use a data contract as illustrated in the sample below to add composite types to service operations
and i deployed the EmployeeService in iis and consuming the service in my web application the code is below
protected void btnsave_Click(object sender, EventArgs e)
EmployeeService.EmployeeServiceClient client = new EmployeeService.EmployeeServiceClient("basicHttpBinding");
EmployeeService.Employee employee = new EmployeeService.Employee();
employee.Id = Convert.ToInt32(txtid.Text);
employee.Name = txtname.Text;
employee.Gender = txtgender.Text;
employee.DateofBirth = Convert.ToDateTime(txtdob.Text);
client.SaveEmployee(employee);
protected void btnget_Click(object sender, EventArgs e)
EmployeeService.EmployeeServiceClient client = new EmployeeService.EmployeeServiceClient("basicHttpBinding");
EmployeeService.Employee employee = client.GetEmployee(Convert.ToInt32(txtid.Text));
txtname.Text = employee.Name;
txtgender.Text = employee.Gender;
txtdob.Text = employee.DateofBirth.ToShortDateString();
and when i am entering the details of employee Id,Name,Gender,DateofBirth and clicking save button iam getting the following error
The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior)
on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.
Code in web.config file in Webapplication(Client) is the following
<?xml version="1.0"?>

<configuration>
<system.diagnostics>
<sources>
<source name="System.ServiceModel.MessageLogging" switchValue="Warning, ActivityTracing">
<listeners>
<add type="System.Diagnostics.DefaultTraceListener" name="Default">
<filter type="" />
</add>
<add name="ServiceModelMessageLoggingListener">
<filter type="" />
</add>
</listeners>
</source>
<source name="System.ServiceModel" switchValue="Warning, ActivityTracing"
propagateActivity="true">
<listeners>
<add type="System.Diagnostics.DefaultTraceListener" name="Default">
<filter type="" />
</add>
<add name="ServiceModelTraceListener">
<filter type="" />
</add>
</listeners>
</source>
</sources>
<sharedListeners>
<add initializeData="C:\Users\HEMANTH\Desktop\Client\Client\Web_messages.svclog"
type="System.Diagnostics.XmlWriterTraceListener, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
name="ServiceModelMessageLoggingListener" traceOutputOptions="Timestamp">
<filter type="" />
</add>
<add initializeData="C:\Users\HEMANTH\Desktop\Client\Client\Web_tracelog.svclog"
type="System.Diagnostics.XmlWriterTraceListener, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
name="ServiceModelTraceListener" traceOutputOptions="Timestamp">
<filter type="" />
</add>
</sharedListeners>
<trace autoflush="true" />
</system.diagnostics>
<system.web>
<compilation debug="true" targetFramework="4.0" />
</system.web>
<system.serviceModel>
<diagnostics>
<messageLogging logEntireMessage="true" logMalformedMessages="true"
logMessagesAtTransportLevel="true" />
</diagnostics>
<bindings>
<basicHttpBinding>
<binding name="basicHttpBinding" />
</basicHttpBinding>
<wsHttpBinding>
<binding name="mexHttpBinding">
<security mode="None" />
</binding>
</wsHttpBinding>
</bindings>
<client>
<endpoint address="http://localhost/EmployeeWebServices/EmployeeService.svc/basic"
binding="basicHttpBinding" bindingConfiguration="basicHttpBinding"
contract="EmployeeService.IEmployeeService" name="basicHttpBinding" />
<endpoint address="http://localhost/EmployeeWebServices/EmployeeService.svc/mex"
binding="wsHttpBinding" bindingConfiguration="mexHttpBinding"
contract="EmployeeService.IEmployeeService" name="mexHttpBinding" />
</client>
</system.serviceModel>
</configuration>
Things i have tried till now are
1)changed the name of the name of the endpoint address basicHttpBinding to basicHttpBinding_IEmployeeService but still get the save error.
2)Opened the Message Log Trace. Got the error as follows
<MessageLogTraceRecord>
<HttpResponse xmlns="http://schemas.microsoft.com/2004/06/ServiceModel/Management/MessageTrace">
<StatusCode>InternalServerError</StatusCode>
<StatusDescription>Internal Server Error</StatusDescription>
<WebHeaders>
<Content-Length>730</Content-Length>
<Cache-Control>private</Cache-Control>
<Content-Type>text/xml; charset=utf-8</Content-Type>
<Date>Sat, 03 Jan 2015 12:12:24 GMT</Date>
<Server>Microsoft-IIS/7.5</Server>
<X-AspNet-Version>4.0.30319</X-AspNet-Version>
<X-Powered-By>ASP.NET</X-Powered-By>
</WebHeaders>
</HttpResponse>
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
<s:Header></s:Header>
<s:Body>
<s:Fault>
<faultcode xmlns:a="http://schemas.microsoft.com/net/2005/12/windowscommunicationfoundation/dispatcher" xmlns="">a:InternalServiceFault</faultcode>
<faultstring xml:lang="en-US" xmlns="">The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute
or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.</faultstring>
</s:Fault>
</s:Body>
</s:Envelope>
</MessageLogTraceRecord>
Try to understand but could not understand because i'am new to wcf services. Please help me to find the error details.
Thanks in advance
Regards
rax227

Hi Mohan,
I didn't use Fiddler before, I just download and use it but how to see the request message from this software?
I have logged the request to event log before send to web service and copy this request from event log to testing with soapUI, so I don't think have between the actual messages being sent to your client via orchestration and soapui. In the log Response shape
I see the fault response in event log.
You can see
this link to know how to use fiddler. As I suggested above the error you need to check is at the server side who is hosting the service( your party ) because you are getting fault response properly from them. The webservice you are calling seems to look
like WCF service too. Your life would have been so easier if you could ask them to have firewall open from your dev box to their dev server so that you can use use "Add Service Reference" wizard, that even they have .NET wcf service too.
Did you by any chance manage to talk to them what they are getting or if they can increase the exception details in the fault message for you?
If this answers your question please mark it as Answer and if this post is helpful, please vote as helpful. Thanks !

New iSight - Why did iChat AV Work 1st Time but Not Since?

I recently bought an iSight to use with my sister in Minnesota (I'm in Canada, eh). It worked perfectly - the first time I used it after installation. I haven't been able to create a connection with my sister since.
Between the first connection and my second connection attempt, my sister installed a Linksys router and turned on her Mac firewall. She is still able to use iChat for video chats with other people without a problem. Nothing has changed at my end (I have a Linksys router, too, and my Mac firewall has always been on). Sadly, I don't have anyone else with whom to test my connection, but as I said, nothing has changed on my system.
The error message accuses the invited party of failing to respond. This is simply not true. The invited party always "Accepts". (We've alternated initiator and responder roles.)
I've reviewed several support documents including the one about using iChat with an NAT router, although I don't think this is the problem. I opened the ports in my router and after this I was still unable to connect, but for a different reason - "insufficient bandwidth". Restoring my router to the previous configuration (i.e., no special adjustments to ports) restored the original error message ("failed to respond").
I checked my Quicktime and various system preferences and they were correct. This isn't a surprise since iChat did work with my system the one time.
I'm reluctant to keep fiddling with various settings when my original setup actually worked - once.
Thank you for pondering my problem!
James

Hi.
I apologize for not noting the model of router. I'm using a Linksys WRT54G wireless, but my eMac is hooked up with a wire (the wireless is for another Mac). I'm not sure what my sister is using but I will find out.
I agree that it looks like all this is her fault, what with the router and the firewall and the what-not, but I'm mystified by the fact that it worked the first time.
I've printed off some of the other threads and I will try a few other things.
Thanks you very much!

IPhoto will not import Photos due to "Insufficient Space"

Each time I open iPhoto (after the 9.2 update and the OS X 10.) I am getting an error that it cannot import my photos due to insufficient space on the volume containing my iPhoto Library. I definitely have enough space on my HD. I believe it is trying to import photos from my fiancee's photo stream, which right now is just one photo that I tooke as a test.
Does anyone know a solution to this?

How much free space do you have?
As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Kisight: FAQ 1: Want to Test your iSight With Another Person? (replacement)

Original
kisight: FAQ 1: Want to Test your iSight With Another Person?
Suitable for iChat 2.x and iChat 3
This FAQ follows on from EZ Jim's "How To Ensure Your iSight Is Functional"
Testing with Another User
This FAQ presumes you have done the preliminary tests in EZ Jim's FAQ and can see yourself in the Preview windows of iChat.
If your iSight works and you want to test your ability to connect iChat AV for instant messaging, see the iChat AV FAQs for further help.
Apple runs three AIM names:-
appleu3test01,
appleu3test02 and
appleu3test03 are available as Autoresponders. (They answer your call and start to show Video (adverts).
They will accept invites from iChat 2.x, iChat 3, the AIM application on a PC and Trillian also on a PC.
See Table 1 here for clarity
In Addition to these there are several people who post regularly in the iChat and iSight discussion areas who may offer their help. See the list below.
Other people put their details in their Apple profiles which you can see by clicking on their name on the left of any post.
Please be aware of Time Zone differences.
Current Known test users (Be polite and Text a request first).
Rather than post iChat names on a page that could possibly be trawled for info, I linked the list to peoples profiles.
Ralph Johns (UK) See under "Biography" in new Discussions Profile. Using Tiger (iChat 3 Panther at 10.3.9 possible still) Can also host 4 ways
EZ Jim By invite on the Boards only
Defcom (UK) From New Disussion Profile. Using Tiger (iChat 3)
Ryan Mathus New DIscussion Profile. Maryland.
ChrisBel New Discussions. Please note the @mac reference (Paris).
James A. Weston New Discussions Profile. California (Please Text first. Has PCs and Macs. Mac on Tiger and an Intel Mac.
Jeremy Varner Pennsylvania On Tiger
John Holt In Austailia.
See More about their Whereabouts and abilities to test here in Table 2
The people who have offered to be testers have put their iChat details in their profiles.
The Links are to prevent Trawling.
From there you can copy and paste them into the Add Buddy set up screens to put them in your Buddy list. Please note you need to select the correct account type when adding a Buddy.
To start a chat can be done in four ways.
1) Double click the green camera icon next to the person's name in your Buddy list
2) Click the person's name once in the Buddy list and use the icon at the bottom of the Buddy List
3) Click the person's name once and use the Buddies menu items.
4) Right Click on a Buddy and use the Pop Up Menu.
3:54 PM Friday; March 30, 2007

Original
kisight: FAQ 1: Want to Test your iSight With Another Person?
Suitable for iChat 2.x and iChat 3
This FAQ follows on from EZ Jim's "How To Ensure Your iSight Is Functional"
Testing with Another User
This FAQ presumes you have done the preliminary tests in EZ Jim's FAQ and can see yourself in the Preview windows of iChat.
If your iSight works and you want to test your ability to connect iChat AV for instant messaging, see the iChat AV FAQs for further help.
Apple runs three AIM names:-
appleu3test01,
appleu3test02 and
appleu3test03 are available as Autoresponders. (They answer your call and start to show Video (adverts).
They will accept invites from iChat 2.x, iChat 3, the AIM application on a PC and Trillian also on a PC.
See Table 1 here for clarity
In Addition to these there are several people who post regularly in the iChat and iSight discussion areas who may offer their help. See the list below.
Other people put their details in their Apple profiles which you can see by clicking on their name on the left of any post.
Please be aware of Time Zone differences.
Current Known test users (Be polite and Text a request first).
Rather than post iChat names on a page that could possibly be trawled for info, I linked the list to peoples profiles.
Ralph Johns (UK) See under "Biography" in new Discussions Profile. Using Tiger (iChat 3 Panther at 10.3.9 possible still) Can also host 4 ways
EZ Jim By invite on the Boards only
Defcom (UK) From New Disussion Profile. Using Tiger (iChat 3)
Ryan Mathus New DIscussion Profile. Maryland.
ChrisBel New Discussions. Please note the @mac reference (Paris).
James A. Weston New Discussions Profile. California (Please Text first. Has PCs and Macs. Mac on Tiger and an Intel Mac.
Jeremy Varner Pennsylvania On Tiger
John Holt In Austailia.
See More about their Whereabouts and abilities to test here in Table 2
The people who have offered to be testers have put their iChat details in their profiles.
The Links are to prevent Trawling.
From there you can copy and paste them into the Add Buddy set up screens to put them in your Buddy list. Please note you need to select the correct account type when adding a Buddy.
To start a chat can be done in four ways.
1) Double click the green camera icon next to the person's name in your Buddy list
2) Click the person's name once in the Buddy list and use the icon at the bottom of the Buddy List
3) Click the person's name once and use the Buddies menu items.
4) Right Click on a Buddy and use the Pop Up Menu.
5:13 PM Thursday; April 5, 2007

When i drag and drop an image on my site. it gives the following error. "Unable to access local files due to browser security settings. To overcome this, follo"

I am using the firefox version 17 and when i drag and drop an image on my website. It gives me the following error.
Unable to access local files due to browser security settings. To overcome this, follow these steps: (1) Enter "about:config" in the URL field; (2) Right click and select New->Boolean; (3) Enter "signed.applets.codebase_principal_support" (without the quotes) as a new preference name; (4) Click OK and try loading the file again. Or go to the homepage for a link to the tutorial on how to do it.
I have completed the above steps and it is still showing the same error message. Any help would be highly appreciated.
Thanks.

Thanks kumars ,
I have a specific drag and drop area on our website. This works fine for all earlier releases of Firefox after these security settings
"(1) Enter "about:config" in the URL field; (2) Right click and select New->Boolean; (3) Enter "signed.applets.codebase_principal_support" (without the quotes) as a new preference name; (4) Click OK and try loading the file again."
Bust these settings not work for me in Firefox 17.
Yes the drag and drop functionality is java script based and i am not using any script blocker addons.

FTP error-Unable to create new pooled resource: com.sap.aii.adapter.file.ft

Hi,
We have a scenario where XI receives a Idoc and based on the contents of Idoc, It will generate 5 different files and send it to the external FTP server.We configured 5 receiver channels for these 5 files.
When this interface runs, most of the files will be delivered but some of the messages will be errored out.
The receiver channel has shown the following error-
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: com.sap.aii.adapter.file.ftp.FTPEx
I tried to resend them by temperorily stopping other channels to reduce connections to this FTP server.But these messages again resulted with same error.
Can someone suggest what might be the cause for this error.
Thanks in advance.

Hi ,
As I am not sure about the problem so U just try all of the option I am writing below. It may help u as these are the probable solutions for this problem.
1.perform Full CPA cache refresh using PIDIRUSER
2.The problem seems to be in establishing the connection with the File server . This could be due to
a. Wrong user name or password in receiver adapter .
b. Firewall connection are not open
actually you are saying that some files are being delivered so all the file has to be deliverd on same server on diffrent directory or all files are going on diffrent server at present I am assuming that all files are going on diffrent server so please check UID & PWD properly.if they are on same server but diff. directory it can be easily done using one Communication channel only.
3. Finally please check the errorneous communication channel .
to check your communication channels are working fine or not you can check in channel monitoring in PI7.0, adapter monitoring in Xi3.0.
if you are on PI7.0, goto RWBCache monitoring select AE and cilck disply-select the date todays--check everything is greent here
4.Please check your maximal connection pool .
Regards,
Saurabh

File Adapter - FTP - Unable to Create new pooled resource

Hi Friends,
I am getting the following error while using file adapter with FTP protocol...
Attempt to process file failed with Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: FTPEx: PASS command failed
Error MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: FTPEx: PASS command failed
Error Exception caught by adapter framework: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: FTPEx: PASS command failed
Error Delivery of the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: FTPEx: PASS command failed.
Can someone help me to solve this probelm..
Regards,
Shyam.

Hi,
Try to check the directory you have specified in the CC and also check whether you are able to connect to the FTP server with those login credential and access the directory specified.
Also let me know whether it is working fine for other scenario's or not.
Regards,
Nithiyanandam

Help! Unable to create new native thread

Ok I see this problem all over the web but most of the posts are many years old and still leave me a little confused. Often at random times on the same tags like CFLDAP I get the error "Unable to create new native thread". Then a few minutes later the same tag on the same page works just fine.
I have 4GB of memory in this box with 1400 MB set as the maximum Java heap size by the way.
Here are my arguments from the jvm.config file.
# Arguments to VM
java.args=-server -Xmx1400m -Dsun.io.useCanonCaches=false -XX:MaxPermSize=192m -XX:+UseParallelGC -Dcoldfusion.rootDir={application.home}/../ -Dcoldfusion.libPath={application.home}/../lib -Dcoldfusion.classPath={application.home}/../lib/updates,{application.home}/../lib,{appli cation.home}/../gateway/lib/,{application.home}/../wwwroot/WEB-INF/flex/jars,{application. home}/../wwwroot/WEB-INF/cfform/jars,"C:\\Program Files\\Apache Software Foundation\\Apache2.2\\htdocs\\InterWeb-Prod\\includes\\classes"
Here is a typical error that comes through.
struct
Browser     Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.70 Safari/533.4
DateTime    {ts '2010-06-23 10:07:44'}
Diagnostics unable to create new native thread null <br>The error occurred on line 122.
GeneratedContent
HTTPReferer http://--------------------/index.cfm?FuseAction=HR.main
Mailto      interweb@---------------------
Message     unable to create new native thread
QueryString fuseaction=ManagedLists.MailSubscriptions
RemoteAddress     192.168.250.124
RootCause   struct
Message     unable to create new native thread
StackTrace          java.lang.OutOfMemoryError: unable to create new native thread at java.lang.Thread.start0(Native Method) at java.lang.Thread.start(Thread.java:597) at com.sun.jndi.ldap.Connection.<init>(Connection.java:208) at com.sun.jndi.ldap.LdapClient.<init>(LdapClient.java:112) at com.sun.jndi.ldap.LdapCtx.connect(LdapCtx.java:2504) at com.sun.jndi.ldap.LdapCtx.<init>(LdapCtx.java:263) at com.sun.jndi.ldap.LdapCtxFactory.getInitialContext(LdapCtxFactory.java:76) at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667) at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288) at javax.naming.InitialContext.init(InitialContext.java:223) at javax.naming.InitialContext.<init>(InitialContext.java:197) at javax.naming.directory.InitialDirContext.<init>(InitialDirContext.java:82) at coldfusion.tagext.net.LdapTag.do_ActionQuery(LdapTag.java:839) at coldfusion.tagext.net.LdapTag.doStartTag(LdapTag.java:616) at coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:2661) at cfadfunctions2ecfm1473603830$funcADLOOKUPUSERNAME.runFunction(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\includes\adfunctions.cfm:122) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:418) at coldfusion.runtime.UDFMethod$ArgumentCollectionFilter.invoke(UDFMethod.java:324) at coldfusion.filter.FunctionAccessFilter.invoke(FunctionAccessFilter.java:59) at coldfusion.runtime.UDFMethod.runFilterChain(UDFMethod.java:277) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:192) at coldfusion.runtime.CfJspPage._invokeUDF(CfJspPage.java:2471) at cfadfunctions2ecfm1473603830$funcADLOOKUPMULTIPLEUSERNAMES.runFunction(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\includes\adfunctions.cfm:54) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:418) at coldfusion.runtime.UDFMethod$ArgumentCollectionFilter.invoke(UDFMethod.java:324) at coldfusion.filter.FunctionAccessFilter.invoke(FunctionAccessFilter.java:59) at coldfusion.runtime.UDFMethod.runFilterChain(UDFMethod.java:277) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:192) at coldfusion.runtime.CfJspPage._invokeUDF(CfJspPage.java:2471) at cfdsp_managedlists2ecfm55598920.runPage(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\hr\managedlists\dsp_managedlists.cfm:232) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:196) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:370) at coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:2661) at cffbx_switch2ecfm2121232114.runPage(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\hr\managedlists\fbx_switch.cfm:23) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:196) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:370) at coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:2661) at cffbx_fusebox30_cf502ecfm1180471387._factor4(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\fbx_fusebox30_cf50.cfm:241) at cffbx_fusebox30_cf502ecfm1180471387._factor5(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\fbx_fusebox30_cf50.cfm:1) at cffbx_fusebox30_cf502ecfm1180471387.runPage(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\fbx_fusebox30_cf50.cfm:1) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:196) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:370) at coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:2661) at cfindex2ecfm749274359.runPage(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\index.cfm:23) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:196) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:370) at coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65) at coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:273) at coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:48) at coldfusion.filter.MonitoringFilter.invoke(MonitoringFilter.java:40) at coldfusion.filter.PathFilter.invoke(PathFilter.java:86) at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:70) at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8) at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38) at coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:46) at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38) at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22) at coldfusion.CfmServlet.service(CfmServlet.java:175) at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89) at jrun.servlet.FilterChain.doFilter(FilterChain.java:86) at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 ) at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46) at jrun.servlet.FilterChain.doFilter(FilterChain.java:94) at jrun.servlet.FilterChain.service(FilterChain.java:101) at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106) at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42) at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286) at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543) at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203) at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320) at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428) at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266) at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
I could really use some help figuring this out. We are getting random errors a few times a day and usually in places where we are using CFLDAP.
Thanks,
David

Absolutely unbelievable that this has been going on for 4 YEARS and there are still NO definitive answers from Adobe!!
There's no definite answer from Adobe, because there's no definitive single question. These errors come up because - for any number of possible reasons - the JVM becomes overloaded. And it's almost always down to an issue with the application code being run, and nothing to do with CF, per-se. So what's Adobe supposed to do? Come and fix your application for you? There are plenty of diagnostic tools out there - some built into CF itself - which you could use to sort the problem out. Or you could hire someone like Mike Brunt to come and have a look at your set up. All it takes to fix these things is to actually do something about fixing it, rather than slamming one's fist on the desk saying "why doesn't Adobe do something!"
I thought - and my knowledge in the area isn't expansive - the inability to allocate threads was down to the app being choked up: threads are a finite commodity, and if requests are queuing up faster than the JVM can clear them, you're gonna get errors eventually. What causes this sort of thing? More traffic than the server can process. This could be because of server kit, or it could be due to code that doesn't scale to the requirement. Usually the latter. Basically one cannot polish a turd.
I have a 24x7 production server that services 180,000 clients in 300 countries around the clock that cannot afford to be down for more than a few minutes at a time.
I'm running Windows 2008 32-bit with 4GB of RAM because I have some graphics software that cannot tolerate a 64-bit OS. Everything has been running fine for the past few months, but now it's starting to crash more and more frequently. I have CF 8.0.1.195765 and Java 1.6.0_04
How many concurrent requests for 180000 clients generate? The number of clients matters less than how heavily the site is used. But, to be honest, I get the impression the implication is "it's a busy site", in which case I think your hardware is a bit on the lean side. Also, if it's a mission-critical app, running it on a single server is probably ill-advised, just from a fault-tolerance perspective even before one starts thinking about performance.
If I was in your situation, I'd consider the following options:
* upgrade your JVM to the most recent version (1.6.0_21?)
* put more RAM in the box, and run a second CF instance on it.
* get another box.
* refactor the environment so the graphics software runs on a different box, upgrading the CF server to 64-bit (again, with more RAM)
* run some diagnostics on the server, seeing what's taking up threads and where any bottlenecks might be
* get an expert in to do the analysis side of things.
* stop expecting Adode to fix "something".
One of my other symptoms I have noticed is that any work done using RDP starts getting really really bogged down. Opening Windows Explorer and searching for files can take minutes. Restarting the CF service will sometimes fail to complete, and you have to wait a few minutes before the manual Start option appears in the dropdown. Maybe coincidentally, the Performance Monitor will fail to add any of the ColdFusion metrics, for example Running Requests and Queued Requests, and the Event Monitor shows an error relating to an 8-byte boundary not being maintained.
You don't, by any chance, store your client variables in the registry do you? The only time I've seen this happen is when the CF box is munging the OS environment, and the only way I can think this could happen if it was clogging the registry. Never store client variables in the registry.
Adam

HT201412 Have a problem with iPad2, apple logo appears but iPad won't boot up, then logo disappears & iPad dies - probably caused due to insufficient hard disk space (too many apps) - any help greatly appreciated

I have a problem with iPad2, apple logo appears but iPad won't boot up, then logo disappears & iPad dies - probably caused due to insufficient hard disk space (foolishly loaded up too many apps) - any help/advice greatly appreciated

What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

Object failed to run due to insufficient security privileges

Recently migrated from BO XI and Crystal XI to bo 4.1sp2 and Crystal 2013.The recurring crystal reports were migared to new environemnt and schulded to run 1st of the month.There are 300+ reports.The report detail says all these reports are schduled by Adminisatrtor because It was migrated by administartor account.
First of the month all reports failed and error is 'object failed to run due to insufficient security privileges.
And In the event viewer, there were warning from source BusinessObject_cms
"The security for the object identified by 41173 could not be verified during schedule attempt."
Can someone help me to find out the root cause of this issue.thanks.

Hello,
There are many possible root causes.
First check that the migration was complete successfully using the Import Wizard or UMT.
Otherwise, this may occur if the owner was not migrated properly or if the universe contains some row level security..
I hope this helps.
Thanks & Regards,
Insaf

Unable to test new isight due to "insufficient bandwidth"

Similar Messages

Maybe you are looking for