Unable to Track Clients - MSE 7.4 and PI 1.3

Hi Guys,
I have just setup a new PI 1.3 and MSE 7.4.100 and 5508 7.3
My WLC is added into PI and is "reachable"
My MSE is added into PI is reachable and is sync'ed
The CAS on MSE is showing as up
I have added maps and coverage areas and the sync status is good
i am running on the demo licenses for now so dont think that this is my problem?
i know that i have wireless clients in range of the access points but i am unable to tack any clients.
i must of missed something for my setup to work.
Can anyone think of anything that i can check please as i am not at a loss..
thanks in advance...
Mark Julier

Take a look at the application sizing. This will tell you what you need to have in order for your license to actually activate.
http://www.cisco.com/en/US/docs/wireless/mse/3350/7.4/CAS_Configuration/Guide/7_4_MSE_CAS_chapter_0101.html#ID102
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"

Similar Messages

I have missed my iPAD and unable to track now.

Yesterday i have misplaced my iPAD and now unable to search it.
Unfortunately Find My iPAD software was not installed on the iPAD, so unable to track.
is there any other solution like by using Sr. NO/IMEI no or SIM no we can track it.

Apple (and no one else) can not assist (with serial number or iCloud) in finding a lost or stolen iPad.
Report to police along with serial number. Change all your passwords.
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
What to do if your iOS device is lost or stolen
http://support.apple.com/kb/HT5668
iCloud: Locate your device on a map
http://support.apple.com/kb/PH2698
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
What NOT to do if your iPhone or iPad is lost or stolen
http://www.tomahaiku.com/what-not-to-do-if-your-iphone-or-ipad-lost-or-stolen/
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
http://support.apple.com/kb/HT4061
 Cheers, Tom

When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue

When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue.

Hi Jdentremont,
Lync client gets user photos by first querying the Address Book Web Query (ABWQ) service on the server, which is exposed through the Distribution List Expansion web service. The client receives
the image file and then copies it to the user's cache to avoid downloading the image each time it needs to be displayed. The attribute values returned from the query are also stored in the cached Address Book Service entry for the user. The Address Book Service
deletes all cached images every 24 hours, which means that it can take up to 24 hours for new user images to be updated in the cache on the server.
To troubleshoot your problem, please follow the steps below:
1. Navigate to
“X:\share\1-WebServices-1\ABfiles\000000000\000000000” folder. (ABS file share)
You should see some photo files in this folder as the following screenshot.
2. Delete all the files in this folder.
3. On test PC, delete local cache files.
%userprofile%\AppData\Local\Microsoft\Office\15.0\Lync\[email protected]
4. Sign-in Lync with the test account.
5. Go back to the ABS file share, check if there is any Photo file in the folder.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Unable to load Client print control

I know this question has been asked and I have read all of the responses. But, I seem to have a unique problem.
I am using Server 2008 r2 sp2 with ie8. And my problem is getting the error Unable to Load Client Print Control on the client machine for reporting services.
The standard answer here is that the RSClientPrint.cab needs to be loaded on the client machine and installed with a click of the print icon with admin rights. I have done that as a administrator and the print icon works fine as an adminstrator.
However, when I log as a non-admin user, that is when I get the error. The rsclientprint.dll shows up in the registry, but it just does not work for a non-admin user.
I have a open ticket with a MSDN tech at Microsoft, but he seems to be at a loss and is not trying very many things that lead me to believe that this can be resolved.
I am wondering if some else out here has had this problem and got it to work.
Thanks for any help.

Hi KeithTexas,
It seems that the non-Administrator users don't have sufficient permissions on the “Downloaded Program Files” folder where the RSClientPrint control is stored. So, please grant to the user:
1.Open C:\Windows, right-click on the “Downloaded Program Files” folder and click “Properties”.
2.Switch to the “Security” tab, click “Edit”.
3.In the “Security” window, click “Add” and add the specific user to the list.
4.Check the “Allow” box for “Read & execute” permission and click “OK”.
Regards,
Mike Yin
TechNet Community Support

Web Report Viewer error - Unable to load client print control.

Dear All,
We have a problem with Report Viewer print funtionality. Getting the error "Unable to load client print control." on click of Print button.
We tried all solutions posted in web - nothing resolves the issue.
The print works fine when we open the report via a browser. But the same is not working through our application. We have the application installed on the Report server itself and the user has Admin previleges.
Please find below the details
Report control: ReportViewerWebControl.axd
Version: 9.0.30729.4402
SQL server version: SQL Server 2008 R2, 10.50.2500.0 (running on Windows Server 2008 R2 - 64 bit)
Your help on this would be highly appreciated. Please let me know if you need any specific information.
Thanks,
Naga
Nagaraja

Hi, Larry,
Thank you for your answer which remind me and lead me to the resolution. I have struggling on this SQL Server Report Server 2012/Client printing control for
2 days.
I just cannot figure out why it kept prompting non-admin XenApp users for SSRS installation. Thanks for your notes again.
I have 2008 R2 server setup as XenApp server for the publish apps. We published the IE to user to access Web application with SQL 2012 reporting service in
the backend.
In the control environment, users do not have permission to install any software. This SSRS has to be installed as administrator under “Install mode” in XenApp
server.
Yes, 32bit IE works for me but 64bit IE works too.
You just need to ensure which version of IE you’re using to install the SSRS. I’m not aware of using 32bit IE for SSRS installation in server but publish 64bit
IE to client. That’s my mistake.
Thanks again.
JohnnyW2012

I need help authenticating my outgoing server settings in setting up my work email on my Galaxy S5. It says unable to authenticate or connect to server and I even called helpdesk at my email support and they tried every possible port (80, 25, 3535 or 465

I need help authenticating my outgoing server settings in setting up my work email on my Galaxy S5. It says unable to authenticate or connect to server and I even called helpdesk at my email support and they tried every possible port (80, 25, 3535 or 465 SSL) and none of them work. Please help!

You will need to get the required info to create/access the account with an email client from your school.
Are you currently accessing the account with an email client on your computer - if you have a Mac with the Mail.app, or if you have a PC with Outlook Express, etc.? If so, you can get the required account settings there.

FI user is unable to track these payments made against the PO unless he maintains a manual reference

Dear Experts,
I have a requirement as below -
Usually when a Purchase Officer makes a Downpayment request in F-47, and the Finance user posts the downpayment using F-48, the transaction is visible in the PO History.
But if the payment is not a down-payment and if the payment is actually an outgoing payment (sometimes partial payments) posted using F-53, the transaction is not available in PO history..
That is to say that the FI user is unable to track these payments made against the PO unless he maintains a manual reference.
Can you please suggest the dataflow for this so that these transactions are visible in the PO history and if we need to make any changes in order to achieve the link between the payment and the PO.
Kindly share your valuable ideas how we can achieve this requirement.

Hi Rahul,
PO history never update, if DP not made against PO. Normal payments always with respect to Invoices not PO number's. It may possible one invoice posted agaisnt several PO's also. Technically there is no feasible to update normal payments in PO history. You may go for one single report where you can get PO wise payment details. Simple Z report can help you.
Use mentioned FI tables to develop the same.
1. RSEG table to get Invoice Number & PO number's
2. BKPF table to get FI document ,Year with above invoice number ( AWKEY in BKPF table)
3. BSAK table to get payment details along with payment document (Clearing document)
4. BSIK table to get partial payment details and DP details.
Please note no standard report available
Regards
Mani

Unable to view client logs from sccm console

Hi
unable to connect to ccm and unable to view client logs from console. Console installed is on another server that is not site server
Regards Sushain KApoor

Hi
SCCM right click tools adds multiple ‘Client Tools’ entries
are comming when i right click on the clients. when i check for logs it shows client logs written only. More over when i try to connect to C$ i am able to connect to from console right click tools but when i go for connecting ccm folder it says no directory
found admin$\system32\ccm, but my machine is of 64 bit OS hence it should go to syswow64. any ideas how to resolve the same.
i am planning to go with
http://blog.danovich.com.au/2010/11/16/sccm-right-click-tools-adds-multiple-client-tools-entries/ this option
Regards Sushain KApoor

Report Viewer WebPart for Sharepoint - Printing (Unable to load client print control)

Hi there,
I am running a report via the report viewer web part on a SharePoint page. The report itself is working great. But when I attempt to print it, I get a prompt to install something....and then it is followed up with "Unable to load client
print control".
There are some posts out there about updating the a certain CU or to find the RSClientPrint cab and unloading the dlls into the system32 folder and registering it. I've tried that but no go.
Anyone else encounter this issue? If so, potential solutions?
SP 2010 - 14.0.7221.5000
SQL Server 2008 R2 (Reporting Server)- 10.50.1617 (have tried updating to 10.50.6000.34)
IE = 10.0.9200
And yes, I am running as local admin....so there shouldn't be any issue installing the active x component on IE.
Thanks in advance,
Eric

Hi Eric,
According to your description, you can't load the print button in your sharepoint site. Right?
In Reporting Services, Each user who wants to use the print feature must download and install the ActiveX control that provides client print functionality. The first time a user clicks the
Printer icon on the report toolbar, the Microsoft ActiveX control is downloaded to the computer. After the control is downloaded, the
Print dialog box displays whenever the user clicks the Printer icon.
So in this scenario, please enable the setting Download signed
ActiveX controls in Internet Explorer and download it. Please follow the steps below:
Click Tools -> Internet options.
Switch to the Security tab, select the Trusted sites zone, and then click
Sites.
Type the URL of the SQL reporting server, click Add, and then click Close.
Click the Custom level button, scroll to the ActiveX controls and plug-ins
node.
Click Enable for Download signed ActiveX controls, and then click OK.
Then we need to have the
EnableClientPrinting is set to true.
In SharePoint Central Administration, click Application Management.
Click Manage service applications.
Click the name of your Reporting Services service application, and then click
Manage in the SharePoint ribbon.
Click System Settings.
Select Enable Client Printing. The Enable Client Printing option is near the bottom of the page.
Click OK.
Reference:
Enable and Disable Client-Side Printing for Reporting Services
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Unable to install client integration for SAP XI 3.1

Hello experts.
I'm trying to install the client integration kit for SAP XI 3.1, but get an error message saying:
"Unable to perform Client installation. The installation is unable to proceed with a client installation because neither Crystal reports 2008 nor Universe designer were detected".
This is not true, as I do have the Designer up and running - and in v3.1.
The server installation was without problems.
Anyone knows how to solve this?
Thanks in advance.
Best regards, Ingeborg

Hi,
so the BO Edge client tools would only install the Universe Designer. So there is no Crystal Reports so far on the client machine ?
Did you also install the SAP Frontend with BW 3.5 and BI 7 Add Ons ?
Are these brand new installations for Service pack 1 of the XI 3.1 release ?
Ingo

Unable to track message logs of last year - 2014

HI,
In exchange 2007,Unable to track messages for last year 2014 and 2015 works fine. what may be the issue ?
Warm regards, Venkatraja

Hi,
By default, the age for the message tracking log files is 30 days.
You can use Get-MailboxServer "server" | fl message* command to check the value in your Exchange 2007 server.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Belinda Ma
TechNet Community Support

I am unable to track my security Q ?where can i retrive this info ?

I am unable to track my security Q ?where can i retrive this info ?

Go to 'manage your apple id'. Sign in. On left hand side you will see 'Edit your apple id'. Second option is 'password and security', Click that and you are at your destination.

How do we track client deployment via group policy by referring log files globally

How do we track client deployment via group policy by referring log file centrally?

need answer from both CM07/CM012 by using GPO
There is NO Centralized tracking for GPOs.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

We purchased a new iPad2 and registered it using a 'new' iCloud email/ID. We are unable to send email from the iPad and iPhone. The error is: Cannot send mail. The user name or password for iCloud is incorrect.

We purchased a new iPad2 and registered it using a 'new' iCloud email/ID. We are unable to send email from the iPad and iPhone. The error is:>> Cannot send mail. The user name or password for iCloud is incorrect.

About ~20 hours later, this ended up solving itself. We can send email using the '.icloud' email from both the iPad and iPhone. Advise would be 'wait' before you start seeking alteranatives like yahoo, hotmail, etc. This definitely is a convenient way to keep all your 'cloud' information in a centralized place, including the common email...

Connection Problem while client is behind proxy and server out side proxy

hello
i implemented ChatApplication in JAVA, for that i used socket connection when client and server both are in same network then it's working fine.
but when my server is on internate and client is behind proxy and try to connect with server
it not able to connect i get exception.
i serch most of forum i got same answer and i try it but i was not success.
any kind of help is appriciated.
i attached my code(which i implement for testing ) pls reply me
thanks in advance.
Server.java
import java.lang.*;
import java.io.*;
import java.net.*;
class Server {
   public static void main(String args[]) {
      String data = "you are successfully connected with server.";
      try {
         ServerSocket srvs = new ServerSocket(1234);
         Socket skt = srvs.accept();
         System.out.print("Server has connected!\n");
         PrintWriter out = new PrintWriter(skt.getOutputStream(), true);
         System.out.print("Sending string: '" + data + "\n");
         out.print(data);
         out.close();
         skt.close();
         srvs.close();
      catch(Exception e) {
         System.out.print("Whoops! It didn't work!\n");
ProxyClient.java
import java.io.*;
import java.net.*;
import java.util.*;
class ProxyClient{
   public static void main(String args[]) {
     String host="61.17.212.29";
     int port=1234;
           String line;
     Properties properties = System.getProperties();
     /*properties.put("firewallSet", "true");
     properties.put("firewallHost", "192.168.0.1");
     properties.put("firewallPort", "808");*/
     properties.put("socksProxySet","true");
     properties.put("socksProxyHost", "192.168.0.1");
     properties.put("socksProxyPort", "1080");
     System.setProperties (properties);
     try {
     /*SocketAddress addr = new InetSocketAddress("192.168.0.1", 1080);
     Proxy proxy = new Proxy(Proxy.Type.SOCKS, addr);
     Socket skt = new Socket(proxy);
     InetSocketAddress dest = new InetSocketAddress("61.17.212.29",1234);
     skt.connect(dest);*/
         System.out.println("before socket taken");
         Socket skt = new Socket(host,port);
         System.out.println("after socket taken");
         BufferedReader networkBin = new BufferedReader(new InputStreamReader(skt.getInputStream()));
         System.out.println("Received string: '");
         line = networkBin.readLine();     // Read one line
      while(true)
             System.out.println(line);     // Output the line
             line = networkBin.readLine(); // Read the next line, if any
      catch(Exception e) {
         System.out.print("Whoops! It didn't work!\n");
     e.printStackTrace();
}

Now look here. I could not care less about this
code. I don't know anything about it, I don't
want to know, I have already recommended you don't
use it, and I have also given you a simpler and
better solution. If you don't want to take my advice
that is your privilege and your problem.ya i has understand system propertis i have setted and u can see it in the code i have tried by both system properties and also J2SE 5.0 proxy class but i got a same problem malformed Exception server refuse to connection.
is there any problem at sever side?
can u tell me in which way u r teling to set the propery i m looking forward for ur reply.
ya i m sure u will give me.................reply "ejp".
Thnx in advance.

Unable to Track Clients - MSE 7.4 and PI 1.3

Similar Messages

Maybe you are looking for