Unable to transfer adobe file into reader to send

Any suggestions
I drag a file to Adobe Reader and get the following window "Adobe Reader could not open 'seventh council.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)." It seems to do with every single file on my computer.

Thanks for that quick response. I think I have finally cracked it by dint of trying everything on the menu.
If I go to file - export it transfers it into a PDF file which I hope to able to send as an email attachment.
David

Similar Messages

How to transfer input file into XI through sender file adapter

Hi
I am quite new to XI. Want to know how I can transfer a file into XI through sender file adapter. I dont have any input file, so I have to create a sample input file and I want to transfer that into XI. Can you please advise me of the steps involved in that. I have finished work in design and directory, now I want to push file the sample file into XI. The receiver adapter is an IDoc adapter. And also a very trivial question. How I can place my sample file into my source directory. Thanks

Hi Rajiv,
If your transport protocol is NFS then you need to put the file in the XI server. Because it becomes the Network File System. For that you can just type the ip address of the XI server in the "run" command or in the browser with "
" then in any of the Folders you can paste your file. But ensure that this is the path you give in your Sender File Adapter.
If your transport protocol is FTP then you need to see that ftp is running in your system. for that go to Control Panel>Add/Remove Programs>Add/Remove Components. In that check the IIS server and go to details and see that ftp is also checked. Now ftp is running in your system.
Now open your C:> drive >InetPub>ftproot . and create a folder here and paste your file. In the configuration of your File sender adapter just mention the name of the folder.
For your information, you can create a file with xml tags and namespace and message type manually (or) you can directly get it from the test tab of message mapping and generate source code.

How do I convert an Adobe file into a word document?

How do I convert an Adobe file into a word document?

What type of Adobe document are you trying to convert? Which Adobe software or service are you utilizing?

I am unable to create adobe file from attached document from email

I am unable to create adobe file from attached document from email. No 'open in' link is available as given in directions. What to do?

Because there is no abode on the IOS. you'll need to do a search in the app store to resolve your issue.

How do I translate Adobe files into word

How do I translate an Adobe file into a Word Document inorder to edit the Word document?

You can use Adobe ExportPDF to do this.

How do yo turn a pdf file into reader so i can edit the form?

how do yo turn a pdf file into reader so i can edit the form?

I have no idea what you are trying to say; your are trying to open a PDF with Reader?

Unable to transfer large files from MB to External HDs

Hi,
This may be an unusual one. My 1st edition Macbook won't let me transfer large files to my external hard-drives, either by USB, Ethernet or wirelessly through my home wi-fi network.
I've started video editing so I'm importing DVcam tapes through firewire from the camera. A full DV tape translates to about 8-12gb I think.
Using iMovie and saving the import to my Freecom 3.5inch network harddrive vis USB or ethernet, it fails saying 'Unexpected error, error code 1309'.
When I try quicktime pro instead to import the tape to the external HD, I get 'Operation could not be completed, An attempt to add a resource to the file failed'. This happens too with my WD 2.5inch external drive.
However, there is no such problem when I import to the MB's internal harddrive. When I then try and shift the large file off the laptop to an external drive, via USB, ethernet of wirelessly, for editing and save keeping, it fails half way through.
I have the same problem when I try back-up my 17gb virtual windows machine I use with VMware fusion off the laptop to an external drive.
I am currently burning an 18gb iMovie project from the MB's internal HD, over 5 DVDs using Toast's disc-spanning and will reimport them to the external, which is really time consuming.
Also to note, Final Cut Express doesn't have these problems as it seems to break up what would be an 18gb movie file into several smaller files, which my MB is quiet happy to let go onto an external drive. However, the problem re-emerges on Final Cut Ex when I try and import a HDV tape. Possibly FCE isn't breaking them up into small enough pieces for my MB to handle?
Any ideas why this is happening and what I can do to fix it? Or does this mean a new laptop?

Irish Apple Fan wrote:
Hi,
This may be an unusual one. My 1st edition Macbook won't let me transfer large files to my external hard-drives, either by USB, Ethernet or wirelessly through my home wi-fi network.
I've started video editing so I'm importing DVcam tapes through firewire from the camera. A full DV tape translates to about 8-12gb I think.
Using iMovie and saving the import to my Freecom 3.5inch network harddrive vis USB or ethernet, it fails saying 'Unexpected error, error code 1309'.
When I try quicktime pro instead to import the tape to the external HD, I get 'Operation could not be completed, An attempt to add a resource to the file failed'. This happens too with my WD 2.5inch external drive.
I'm a bit late to the party, but specifically there's a 4GB file size limit in the FAT32 format that is standard on many external hard drives. I've run across this problem before, and usually it copies over most of the file and then quits when it reaches the limit.

Unable to open adobe files?

It seems that I can no longer open any adobe files or pdf's can canyone help.
Tried free trial download but will not download

What types of files are you calling "adobe files"
To open pdf files you can use either Adobe Acrobat or Adobe Reader. If you only need to read the pdf file then Reader is sufficiewnt.
If you are unable to download the trial, what free trial was this. You could try using a different browser - some bnrowsers don't work well with download links in the Adobe site

Unable to convert PDF file into word document

I just signed up with Adobe in order to convert a PDF file into a word document and it continues to fail. Any suggestions.

If you have adobe X, simply go to "File" -> "Save-As" and Microsoft Word is an option. Also, there is a download (paid) called Able2Extract that will allow you to convert pdfs to word, excel, etc. but the formatting is often lost. If you get the premium package, you can even convert scanned documents. I've used Adobe X to do the conversion, and it retains headers, footers and all formatting.
And i personally share you with a article about how to converting PDF files to Word(.doc), you just need to follow the easy guide.
Hope it can help you a lot.

Unable to convert swf files into fla files

Hi,
I tried using Dreamweaver to convert a SWF file into a FLA file so I can edit it in CS 5. But when I right clicked the placeholder for the file, it doesn't have an "Edit in Flash" option. What am I doing wrong?
Thanks very much,
Rosemary

According to http://help.adobe.com/en_US/flash/cs/using/WSd60f23110762d6b883b18f10cb1fe1af6-7f12a.html# WSc78c5058ca073340dcda9110b1f693f21-7acf
asset is reflected in Flash immediately.
Edit a SWF file from Dreamweaver in Flash
If you have both Flash and Dreamweaver installed, you can select a SWF file in a Dreamweaver document and use Flash to edit it. Flash does not edit the SWF file directly; it edits the source document (FLA file) and re‑exports the SWF file.
In Dreamweaver, open the Property inspector (Window > Properties).
In the Dreamweaver document, do one of the following:
Click the SWF file placeholder to select it; then in the Property inspector click Edit.
Right-click (Windows) or Control-click (Macintosh) the placeholder for the SWF file, and select Edit With Flash from the context menu.
Dreamweaver switches the focus to Flash, and Flash attempts to locate the Flash authoring file (FLA) for the selected SWF file. If Flash cannot locate the Flash authoring file, you are prompted to locate it."
But I don't see "Edit with Flash" option. Maybe because I have a trial version of Dreamweaver?

IPad Mini - Unable to open mobi files into another app...

Just got an iPad mini and it appears that I can't open mobi files on my Kindle app. I also have an iPad3 and I have no problems opening mobi files on my Kindle app on it.
Basically I put my mobi e-books on skydrive and when I want to put them in the Kindle app I just select to open the files in another app and I can select the Kindle app. I am unable to do this with my iPad mini.
Both my iPad3 and Mini are running IOS 6.1.3. I did some google searches and found that this may be an issue with some iPads running 6.1.3. I installed a file manager app on my Mini and it appears that it sees the mobi files as rar format files so it does not give me the option to open them with the Kindle app.
Does anyone know if there is a fix for this issue? I was planning on using my Mini as my primary e-book reader and I was hoping to be able to do this without having to convert all my mobi files into mother format
Any help resolving this issue will be much appreciated!

After trying various different things and resetting my Mini to factory default several times I was able to figure out how to open the mobi files I have on Skydrive and Dropbox in my Kindle app.
I had to delete both my Skydrive and Dropbox apps and do it through the web browser. I was able to download the mobi file with Safari and open the file in the Kindle app.
Firest I reset my Mini setup and installed only the Kindle, Skydrive and Dropbox apps. I could not open a mobi file into the Kindle app with either The Skydrive or Dropbox app. I even reset my Mini and installed the Kindle app with just Skydrive and then reset it again and tried with just Kindle and Dropbox installed I could not get it work.
Finally, I reset again and installed only the Kindle app and used Skydrive through Safari and it worked just fine. I tested it with Dropbox and Safari and it also worked.
So basically, for whatever reason, my iPad Mini just can not open mobi files into the kindle app using either the Skydrive or Dropbox app. However, my iPad3 running the same IOS and app versions can do it just fine. Go figure...

How to make Sony DSC M1 transfer MP4 file into iphoto6 automatically ?

Dear all
My digital Camera Sony DSC-M1 is able to take pictures and take video into mpeg4 format .
this is the revirew of this camera
http://www.steves-digicams.com/2004_reviews/m1.html
However, I got a problem while using this camera and iphoto .
When I plug this camera into computer , iphoto will transfer all photo from the camera , but do nothing with the video.
I guess that problem is the video file is not inside the "/DCIM" folder
All video file ( *.mp4 ) are all in the folder named " /MP_ROOT/101MNV01/ "
Can anyone help me how to make this sync from camera to iphoto automatically both photo and video ?
At this moment , I do this manually by drag files from that folder ( /MP_ROOT/101MNV01/ ) into iphoto .
This problem also bother me while I am using iPod + Camera connector to transfer the file when I am out for the traveling .
pls , help me , thanks a lot

Here's the link:
http://www.sony.ca/xdcamex/software.htm
hope this helps--

New zen 8GB ( transfer mp4 file into the device )??????

i just bought the new zen 8GB .i wanted to transfer my mp4 file which i had formated .. but i failed to transfer it into my device ... can anyone tell me how can transfer my mp4 file into my device ?thank you ....

Send it back to Amazon for a replacement - they have the best return policy/service in the business.

Unable to open PDF files in Reader after canceling Acrobat subscription

Dear Adobe,
I have a case# 0185794056. It involves a purchase of Pro XI and a cancellation shortly after. Since the cancellation of Pro XI, I have had difficulties accessing Reader. When I click to open a file in Reader, I receive a message stating I need to renew my Pro XI subscription. What can be done?
Sincerely,
Brian Razak

Hi Brian,
If I understand correctly, you're double-clicking a PDF in hopes of opening it in Reader, but it opens (or tries to) to open in Acrobat Pro, instead. Is that the case?
Did you uninstall Acrobat Pro after canceling your subscription? If not, I would start there. Or, you could also associate the PDF filename extension with Reader, instead of Pro (the steps vary by operating system).
Please let us know how it goes.
Best,
Sara

Transfer Adobe files

Hello
I have created a website using Adobe Dreamweaver. I downloaded a trial version of Adobe CC. Is there a way I can transfer my files from DW over?
Thanks
Nick

And what? DW works the same in CC - simply point your site definition to the existing folder and that's it.
Mylenium

Unable to transfer adobe file into reader to send

Similar Messages

Maybe you are looking for