Unable to transfer Business Partners from CRM to Handheld

Hi Guys,
I am setting up a mobile environment using ME2.1. The setup  has successfully happened and now i am facing a problem on transferring master data from CRM to Handheld. I have done the following:-
1) Assigned the User of Mobile a business partner in Employee role
2) Assigned a position to the business partner at the Sales org level
3) Have done the basic settings for handheld, i.e. created a PPR applicable to accounts, Users and Products (All required business partners and products have been assigned to this PPR)
4) Added all the required business partners as my favourties
5) Created a Business partner as an organisation in maximum possible roles and used the business partner in the reference account while doing the basic settings for handheld.
6) Done relevant transaction type setting for transferring the transactional data
After all the above, now i can see transactional data on the handheld as well as products. However in the business partners tab, i can only see the employee attached to my user-id and nothing else.
Am i missing something out in the customizing? Please help me.
Regards
Ashish Gupta
Message was edited by: Ashish Gupta
Guys, need help urgently.. We are still stuck with the problem. Please help.

Hello Ashish Gupta,
unfortunately I can't help you with this problem. But can you give me some Links to Documentation for the Solution you implemented? Was the Documentation correct and usable? We are also currently implementing CRM 4.0 and find many inconsistencies.
Regards
Gregor

Similar Messages

  • Unable to delete Business Partners in CRM

    I have used TCode BUPA_PRE_DA to mark a certain BP to status "to be deleted". The message said "Business Partner 123 has status 'Flagged for Delettion". When I went to delete the BP using BUPA_DEL, I couldn't do it. The message says, 'no business partners deleted'. I have SAP_ALL and SAP_NEW authorizations. Am I doing it the right way? What could be the issue? If there is an alternative, please suggest.
    Vijay

    Vijay,
    There should be some relationship attached to those BP. Select any BP for which you are getting error, go to trx BP --> Open that BP --> then go to "RELATIONSHIP" tab and check. If entries there, you can delete those realtionship and try again.
    Regards
    Pankaj

  • Transfer Business Partner from R/3 to CRM

    Hi All,
    Can any one pls help me how to transfer business partner from R/3 to CRM system? If it can be done through ALE pls explain me the detailed step how to do it like wht message type should be used etc. If there are some other way pls let me know.
    Thanks
    Sathish

    Check them out:
    Replication of BPs from CRM to R/3
    downloading partner functions from R/3 to CRM
    Data exchange between R/3 and CRM 5.2
    delete bank details for a BP in CRM 5.0, it doesn't get deleted from R/3
    Reward Points if useful.

  • Transfer deltas on Business Partner from CRM to MDM

    Hi all!!
    I have to send the deltas on Business Partner from CRM to MDM. I know this is done with Change Pointers and the extractors.
    I have the FM CRM_BUPA_EXTRACT to extract the data but I don´t know how do it.
    Can someone guide me on this, please??? Is urgent.
    I will be very thankful with your help.
    Thanks in advance and regards,
    Manuel

    Hi Ahmed,
    Check out the Delta Load settings on the CRM side.
    Take input from the functional consultants around you.
    <b>Reward points if it helps.</b>
    Regards,
    Amit Mishra

  • Initial Load of IS-U business partners to CRM - wrong business partner cat

    Hi Gurus,
    when donwloading CUSTOMER_MAIN from R/3 to CRM
    Where is determined that the business partner in CRM should be created in the business partner category 'Person'?
    We have the problem that all our business partners in CRM are now 'Organizations' (but were sold-to-parties in R/3 with account group DEBI)
    PIDE - setting is:
    R/3 account group DEBI  ---> classisifaction 'B' ('Customer')
    In the customizing of the business partner roles for the role type CRM000 (and for all the others) Organization, Person and Group is all allowed by default.
    The download itself and the number ranges work fine.

    The reason for the problem is unknown but a workaround is to first initial load BUPA_MAIN instead of CUSTOMER_MAIN, then the right business partner category is taken by the system

  • External Data Transfer - Business Partners?

    Hi,
    I am migrating business partners from a legacy brown system to a Green SAP system using KCLJ and keep running into the error below:
    " Fields of record: PARTNER =  .  "
    I am unable to troubleshoot this and need some help. My numbering is internal and I have all the required fields in the text file. I`m not sure what other information to put here, if anybody has any ideas, i`m happy to share more.
    Thanks,
    Rohit.

    Hi,
    I am not sure if this is the correct forum to answer your query.
    But anyways, have you separated the data/fields by comma(,) or semicolon(;)
    Select the option in KCLJ appropriately.
    Regards,

  • I am unable to transfer my contacts from my ms outlook t...

    i am unable to transfer my contacts from my ms outlook to my new blackberry 8900 curve. how do i go about doing this since i've lost my phone and am handicapped without my contacts

    Hi there!
    With the limited information in your post ("unable to transfer" is pretty sparse information), I suggest the following steps (insert plenty of reboots of your PC...not just restarts, but full power down reboots). Also, it is advised that you be logged into the PC on an account with full admin rights. Further, under Vista, use the "Run As Administrator" option for everything.
    1) Remove your device OS update package from your PC (add/remove programs)
    2) Cleanly uninstall the RIM DTM software:
    KB02206 How to perform a clean uninstall of BlackBerry Desktop Software
    3) Get a fresh download of the RIM DTM software:
    http://na.blackberry.com/eng/services/desktop/
    Choose the version that is newest and (if applicable) compatible with your PIM (if you are synchornizing via USB):
    KB12268 Applications supported by BlackBerry Desktop Manager for synchronization
    4) Download (to your PC) a fresh copy of your device OS package from your carrier:
    http://na.blackberry.com/eng/support/downloads/download_sites.jsp
    5) Install DTM to your PC
    6) Install (also to your PC), the device OS package
    7) Start the organizer configuration over:
    KB17022 How to configure organizer applications for synchronization using BlackBerry Desktop Manager
    Hopefully that will get things going again.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • For an Organization unit, unable to assign Business partners in devlopment box

    Dear All,
    For an Organization unit, unable to assign Business partners in development-box , when i click on assign button
    its navigating to organization unit only (choose relation ship)
    But for production system i can assign the BP with out any issue
    Can u please suggest us, do we have any settings to chose the relation ship as position...
    Please find below screen image for your reference
    Thanks ,
    Rahul Yedapally 

    Vijay,
    There should be some relationship attached to those BP. Select any BP for which you are getting error, go to trx BP --> Open that BP --> then go to "RELATIONSHIP" tab and check. If entries there, you can delete those realtionship and try again.
    Regards
    Pankaj

  • Unable to transfer music vidios from itunes to my ipod

    I just bought a new ipod and unable to transfer music videos from itunes to ipod, my old ipod was working fine, and i don't remember making changes on the setting tab,help please.

    kcrail wrote:
    If you could call and walk me through how to do this, I sure would be grateful.  xxx-xxx-xxxx.  I am getting on an airplane at 12 noon EST on 4/1/09 and would really like to have some music with me.
    Post relates to: Centro (Verizon)
    Sorry, kcrail, this is a Community Forum.  All support is done here.  (BTW, posting your phone number in a Public Forum is somewhat akin to writing it on the wall of the bus station.  Never a good idea!)
    Since you are running Windows 2000, you most likely have a pretty old version of Windows Media Player.  Easiest thing for you to do would be to puchase a USB Card Reader that supports Micro SD cards, and simply drag and drop your music to the /AUDIO folder on the card.  Put the card back into your phone and you're done!
    WyreNut
    Post relates to: Centro (AT&T)
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Unable to transfer photos (jpeg) from desktop to SD card.  Appears as if successful then does not show up when put SD card in camera.

    Unable to transfer photos (jpeg) from desktop to SD card for Cannon Power shot camera. 
    Appears as if successful, jpegs show up in SD card window,  but they do not  show up when I put SD card in camera.
    Go through entire process to no avail.  SD card is not locked.
    Thank You
    L

    Ahh, extra info ahead...
    Pictures on SD card, SanDisc-SDHC, 4GB Card, are jpeg.  The ones I would like to put on the card are jpeg as well.
    SD format MS-DOS (FAT32) .
    3.876 GB available on card.
    I have
    Exported the pics from iPhoto to the desktop. Inserted sd card into side of iMac.  The icon of card popped up.
    Attempts to no avail:
    1)   Dragged the photos to the disk icon for the sd card.
    2)   Dragged pictures into the DCIM folder (where all photos taken on camera resided).
    3)   Created new folder.  Put photos from desktop into folder and dragged ne folder inside DCIM -since pictures taken at different times had their own folders inside the DCIM folder.
    Every time the photos/files end up showing up on the sd card as long as it is in my computer but when ejected and inserted into my camera, all imported photos/jpeg file are gone.
    Hmmmmm

  • I am unable to transfer song bought from the itunes store to my ipod- can anyone please assist?

    I am unable to transfer song bought from the itunes store to my ipod- can anyone please assist?

    What happens when you try?
    If the song is an older purchase (from more than a few years ago), it may have DRM (copy protection).  You can check by selecting the song on a list in iTunes, and doing a Get Info (right click - Get Into).  On the Info window Summary tab, if Kind is Protected AAC audio file, it has DRM.  Also note what it says there for Apple ID.  You need to authorize the computer you use with the iPod to play content purchased with that Apple ID.
    From the iTunes menu bar, under Store, select Authorize This Computer.  Enter the Apple ID (and password) used to purchase the song.  One computer can be authorize for multiple Apple IDs.
    NOTE:  More recent iTunes Store song purchases do not use DRM, although other type of media (such as TV shows and movies) still do.
    If that's not the cause of your problem, please post back with more details...

  • HT201274 I am unable to transfer my songs from my ipad to my iPhone even though they are both registered to the same apple Id

    I am unable to transfer my songs from my ipad to my iPhone even though they are both registered to the same apple Id

    How are you trying to accomplish this? You can't transfer media directly from one iDevice to another. You should be transferring your purchased items to your iTunes library on the computer you sync them with, then syncing them from there.
    You should be able to re-download media from the iTunes store using the same Apple ID used to purchase it to begin with.

  • Unable to transfer purchased apps from iphone to window 7

    I tried all the solution which been offered from apple support but i still unable to transfer purchased apps from iphone to window 7. Please show me what to do =(

    Are you trying to transfer apps to Windows 7 to USE them on Windows 7, or to back up your iPhone? iPhone apps will not run on Windows (OR Mac OS X); they only run on the iPhone, iPod Touch, and iPad.
    To back up your iPhone, connect the phone to your computer using the cable that came with the phone and a USB port directly on the computer, not a hub. Do not sync.
    Check the account you have on your iPhone by going to Settings/Store. Make sure you are logged in to this same account on your computer, and that the computer is Authorized to this account (check the Store menu).
    Go to the File Menu in iTunes and choose "Transfer Purchases".
    If you have a problem with any of these steps please let us know exactly what the problem is.

  • Error while downloading Business Partners from R/3 to CRM in Inbound que

    Hi Experts,
    I am getting function module "PMPAY/P_CHK_MC" not found error in Inbound queue of CRM while downloading customers from CRM to R/3. I checked this FM is not exist in CRM.
    Why this is FM required in CRM, any way to skip this error?
    Regards,
    Kumar

    Go to IMG>CRM>Basic Functions>Payment Cards>Basic Settings>Maintain Payment Card Type> Here take out checking rule values example 1234 which is assigned to Type. If this dont resolve let me know I will check tomorrow in my system as I dont have access to system now.
    Hope this helps.

  • Initial Load of IS-U business partners to CRM - bdoc error

    Hi Gurus,
    i try to do an initial download from R/3 IS-U to CRM. Several objects from customizing have already been downloaded successfully. When downloading the business partners i get a bdoc error message for every single BP saying that
    'business partner role MKK is not available' Number R1206
    I figured out that the business partners in IS-U do have that role 'Contract partner' (which is technical 'MKK') and that data is maintained there. I also checked CRM and figured out that a business partner role 'contract partner' is not available there.
    Should i create it manually?? It is nowhere mentioned that a CRM role 'contract partner' should be created manually. Shouldn't the middleware do that? I found a document on service marketplace called 'IS-U specifics on the setup and load guide for the business partners' where i can read:
    'Sold-to-parties in CRM are replicated as contract partners in the OLTP system and vice versa'
    Does that mean that this mapping of roles is hardcoded? Is it customizeable? Does somenone know where to customize the mapping of business partner roles?
    Thank you
    Edited by: sapgipsy on Mar 19, 2010 4:21 PM
    Edited by: sapgipsy on Mar 19, 2010 4:22 PM

    Looks like as if you haven't activated the IS-U specific FM "COM_BUPA_MWX_BPS_FILL_ISU" in the BP middleware framework where the conversion between the IS-U role "MKK" and the CRM role "CRM000" takes place:
    Check via SM30 table com_bupa_call_fu in the IS-U system if the above FM is activated.
    Regards,
    Alexander

Maybe you are looking for