Unable to Transfer Customer Masters from feeder system to GTS!

Hi all,
I am facing a problem in transferring customer masters from ecc to gts. The RFC's are working properly (i.e Material Masters are getting transferred properly) but customers are not going. When i go to slg1 it is giving me a display log message as "No Customs Business Partner exists for partner" and when i go to legalr3 it is saying 0 were processed when i am trying to transfer a list of customers. The basic config has been done ie org structure, doc type mapping, item cat mapping, and the necessary compliance config...
Would appreciate if you could provide some help here?
Thanks,
Raj Mohan

Hi Raj,
As you have already mentioned that RFCs are working fine, However To be on safe side, I will recommend to check the basis setting again.. Please follow the steps below and let me know if it helps.
R/3 client:-
Please make sure that there should be no change in Logical naming of the R/3 client (scc4)
RFC Destinations are maintained properly for RFC Calls. Please check their rfc username and password. (sm59)
RFC Destinations are maintained correctly for Method Calls (bd97)
ALE Distribution Model is set up correctly (bd64)
Change Pointers are activated globally
Change Pointers for Message Types are correct
it should be
Customer master    /SAPSLL/DEBMAS_SLL
Vendor master     /SAPSLL/CREMAS_SLL
Material master   /SAPSLL/MATMAS_SLL
GTS client:-
Please make sure that there should be no change in Logical naming of the R/3 client (scc4)
RFC Destinations are maintained properly for RFC Calls. Please check their rfc username and password. (sm59)
RFC Destinations are maintained correctly for Method Calls (bd97)
Feeder system definition is correct in your Logical System Group (spro)
And also as Shruti mentioned. go to st22 and check if there is any abap short dump error. If you have any error there. Post it here...It may help to understand the problem more closely.
I hope that this may help...

Similar Messages

How to transfer payment document from feeder system to GTS system

Hello Colleagues,
I encounter a problem about how to transfer payment. As you know, we have a standard processes to involve like sales order, delivery, purchase order into GTS. But I cannot find any documentation to introduce the related payment.
Could you give any clue to guide payment transfer?
Thanks a lot,
Boer

Hi Boer
I was having the same problem below is what needs to be done.
GTS blocks the Payment run procedure when a BP is included in the SPL.
ECC Config - Financial Global Settings/Check in SAP GTS for FI/Activate Check for GTS.- This will activate the Transfer
In GTS below has to be maintained.(These functions, doc types and Item catg are hard coded so use the below)
Partners -
FIACN     Account Number
FIACO     Account Holder
FICOM     Nt to Payee
FIDEB     Customer(FI)
FIKRE     Vendor(FI)
FIPAB     Bank(FI)
FIPAY     Payee(FI)
FIREG     Payer(FI)
Doc Type
FIIN - Incoming
FIOUT - Outgoing
Item catg
FI0A
These all need to be linked to the same in the Feeder system.
So basically when a proposal is created the Document goes to GTS and gets screened, and if found blacklisted during the Payment run it blocks.
Hope the above was helpful.
Cheers
Carl

Importing swiss tariff code numbers from feeder system?

Hi Experts
due to a business process we cannot tariff our products inside GTS, because of the usage of dummy material numbers. That means that a material number can sometimes have the tariff code 4711 and in another delivery the tariff code 1234. From that reason also the materials in the feeder system (R/3) are not fixed tarrifed in the master data.
So we tariff the material in the line item inside the delivery manually.
Unfortunately in Switzerland we do not use the EUSTA statistical numbers. So for that, the standard solution (take statistical number from feeder system) would work. But we have the CH_EXP swiss export code, which has a different tariff code structure.
My question is, if it is possible to transfer the code number form field EIPO-STAWN (feeder system) into the field CCNGN in GTS? We searching for a BADI, Userexit or something else which could steer that - but unfortunately without success.
Thanks a lot for your input.
Regards,
Andreas

Hi,
i think there is a way by using the Badi
"BAdI for Mapping and Enrichment of Data from Billing Documents (SD0C)"
(/sapsll/if_ex_ifex_sd0c_r3~if_extend_cus_cdoc)
you find this BAdi in
IMG
-Sales and Distribution
--Foreign Trade/Customs
---SAP Global Trade Services - Plug-In
Business Add-Ins for SAP Global Trade Services
Edit Control of Document Transfer
Change and Supplement Document Data for Transfer
here you can change the transfered item information from the feeder system to GTS.
(/sapsll/if_ex_ifex_sd0c_r3~if_extend_cus_cdoc)
In structure:
CS_ITM_CDOC-CCN
you find all the needed fields to overwrite the commodity code number.
regards,
Ralf

I am unable to transfer my contacts from my ms outlook t...

i am unable to transfer my contacts from my ms outlook to my new blackberry 8900 curve. how do i go about doing this since i've lost my phone and am handicapped without my contacts

Hi there!
With the limited information in your post ("unable to transfer" is pretty sparse information), I suggest the following steps (insert plenty of reboots of your PC...not just restarts, but full power down reboots). Also, it is advised that you be logged into the PC on an account with full admin rights. Further, under Vista, use the "Run As Administrator" option for everything.
1) Remove your device OS update package from your PC (add/remove programs)
2) Cleanly uninstall the RIM DTM software:
KB02206 How to perform a clean uninstall of BlackBerry Desktop Software
3) Get a fresh download of the RIM DTM software:
http://na.blackberry.com/eng/services/desktop/
Choose the version that is newest and (if applicable) compatible with your PIM (if you are synchornizing via USB):
KB12268 Applications supported by BlackBerry Desktop Manager for synchronization
4) Download (to your PC) a fresh copy of your device OS package from your carrier:
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
5) Install DTM to your PC
6) Install (also to your PC), the device OS package
7) Start the organizer configuration over:
KB17022 How to configure organizer applications for synchronization using BlackBerry Desktop Manager
Hopefully that will get things going again.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Unable to transfer music vidios from itunes to my ipod

I just bought a new ipod and unable to transfer music videos from itunes to ipod, my old ipod was working fine, and i don't remember making changes on the setting tab,help please.

kcrail wrote:
If you could call and walk me through how to do this, I sure would be grateful. xxx-xxx-xxxx. I am getting on an airplane at 12 noon EST on 4/1/09 and would really like to have some music with me.
Post relates to: Centro (Verizon)
Sorry, kcrail, this is a Community Forum. All support is done here. (BTW, posting your phone number in a Public Forum is somewhat akin to writing it on the wall of the bus station. Never a good idea!)
Since you are running Windows 2000, you most likely have a pretty old version of Windows Media Player. Easiest thing for you to do would be to puchase a USB Card Reader that supports Micro SD cards, and simply drag and drop your music to the /AUDIO folder on the card. Put the card back into your phone and you're done!
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Unable to transfer photos (jpeg) from desktop to SD card. Appears as if successful then does not show up when put SD card in camera.

Unable to transfer photos (jpeg) from desktop to SD card for Cannon Power shot camera.
Appears as if successful, jpegs show up in SD card window, but they do not show up when I put SD card in camera.
Go through entire process to no avail. SD card is not locked.
Thank You
L

Ahh, extra info ahead...
Pictures on SD card, SanDisc-SDHC, 4GB Card, are jpeg. The ones I would like to put on the card are jpeg as well.
SD format MS-DOS (FAT32) .
3.876 GB available on card.
I have
Exported the pics from iPhoto to the desktop. Inserted sd card into side of iMac. The icon of card popped up.
Attempts to no avail:
1)   Dragged the photos to the disk icon for the sd card.
2)   Dragged pictures into the DCIM folder (where all photos taken on camera resided).
3)   Created new folder. Put photos from desktop into folder and dragged ne folder inside DCIM -since pictures taken at different times had their own folders inside the DCIM folder.
Every time the photos/files end up showing up on the sd card as long as it is in my computer but when ejected and inserted into my camera, all imported photos/jpeg file are gone.
Hmmmmm

I am unable to transfer song bought from the itunes store to my ipod- can anyone please assist?

I am unable to transfer song bought from the itunes store to my ipod- can anyone please assist?

What happens when you try?
If the song is an older purchase (from more than a few years ago), it may have DRM (copy protection). You can check by selecting the song on a list in iTunes, and doing a Get Info (right click - Get Into). On the Info window Summary tab, if Kind is Protected AAC audio file, it has DRM. Also note what it says there for Apple ID. You need to authorize the computer you use with the iPod to play content purchased with that Apple ID.
From the iTunes menu bar, under Store, select Authorize This Computer. Enter the Apple ID (and password) used to purchase the song. One computer can be authorize for multiple Apple IDs.
NOTE: More recent iTunes Store song purchases do not use DRM, although other type of media (such as TV shows and movies) still do.
If that's not the cause of your problem, please post back with more details...

HT201274 I am unable to transfer my songs from my ipad to my iPhone even though they are both registered to the same apple Id

I am unable to transfer my songs from my ipad to my iPhone even though they are both registered to the same apple Id

How are you trying to accomplish this? You can't transfer media directly from one iDevice to another. You should be transferring your purchased items to your iTunes library on the computer you sync them with, then syncing them from there.
You should be able to re-download media from the iTunes store using the same Apple ID used to purchase it to begin with.

Unable to transfer purchased apps from iphone to window 7

I tried all the solution which been offered from apple support but i still unable to transfer purchased apps from iphone to window 7. Please show me what to do =(

Are you trying to transfer apps to Windows 7 to USE them on Windows 7, or to back up your iPhone? iPhone apps will not run on Windows (OR Mac OS X); they only run on the iPhone, iPod Touch, and iPad.
To back up your iPhone, connect the phone to your computer using the cable that came with the phone and a USB port directly on the computer, not a hub. Do not sync.
Check the account you have on your iPhone by going to Settings/Store. Make sure you are logged in to this same account on your computer, and that the computer is Authorized to this account (check the Store menu).
Go to the File Menu in iTunes and choose "Transfer Purchases".
If you have a problem with any of these steps please let us know exactly what the problem is.

Unable to transfer Purchase Requisition from ECC to EBP

Dear Friends.
We are unable to transfer PR from ECC to EBP. System issue stop message in SLG1 transaction for object BBP_EXTREQ
Stop Message Type: Document type for determined backend system is missing.
Warning Message Type: Grant 1111 does not exist.
As per configuration guide we have performed following setting in EBP client
1. We have created organization unit Entry Channel under company code.
2. Under Entry Channel we create Local Purchasing Organization.
3. Under Loc Purchasing Org we created Local Purchasing Group with
 - attribute BUK as backend company code
 - attribute BSA as backend PR type (NB)
 - this group is responsible for Entry channel procurement (setting in Function tab)
4. Under Loc Purchasing Group we assigned RFC user which is same defined as RFC user in both EBP and ECC client.
 - attribute DP_PROC_TY defined as backend ECC PO type (NB)
5. Attribute CUR define for entry Channel.
6. Remote connection established with the same user defined under Organization Unit
7. Remote user has profile sap_all and sap_new authorization.
8. Material group, Material Type and Vendors are replicated from backend system.
9. Sourcing always allowed is set for all product categories in Define sourcing for Product Category.
10. Extended Classic Scenario is active.
11. Defined Tolerance check and assigned TOG attribute.
Performed following setting in ECC client.
12. Defined RFC connection and user same as defined in Organization unit.
13. Defined profile which reference to EBP logical system
14. Maintained table V_T160EX with Material group/Pur group/ Profile combination.
Finally transfer Purchase Requisition from ECC to EBP via report BBP_EXTREQ_TRANSFER. Further the outbound Queue fails with status ANORETRY. Also the log displayed the error Application aborted due to serious problems
SLG1 in EBP issues stop message Document type for determined backend system missing and warning message Grant 1111 does not exist.
Any idea what could be the reason?
Please help!!
Sandeep

Hi
It seems there is some problem with the Configuaration settings in SRM as well as R/3 side.
Anyways, please have a look at the following links, which might help.
Direct Procurement
http://help.sap.com/saphelp_srm50/helpdata/en/b7/15d4396898042fe10000000a114084/frameset.htm
Prerequisites for External Requirements
http://help.sap.com/saphelp_srm50/helpdata/en/18/db183d30805c59e10000000a114084/frameset.htm
Attributes for the SRM Scenario
http://help.sap.com/saphelp_srm50/helpdata/en/84/a7e3389870c05ce10000000a114084/frameset.htm
Direct Material Scenario: Other Planned External Requirements
http://help.sap.com/saphelp_srm50/helpdata/en/6a/4b9e3b891da20ee10000000a114084/frameset.htm
Number range settings
http://help.sap.com/saphelp_srm50/helpdata/en/5d/fd7d3cb7f58910e10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/b7/15d4396898042fe10000000a114084/frameset.htm
Define Transaction types
http://help.sap.com/saphelp_srm50/helpdata/en/10/fd7d3cb7f58910e10000000a114084/frameset.htm
Direct Material Scenario with Planning in SAP APO
http://help.sap.com/saphelp_srm50/helpdata/en/d3/4b9c3b122efc6ee10000000a114084/frameset.htm
Hope this will help.
Regards
- Atul

Transfer customizing data between SAP System

Hi to all!
How I can transfer PS customizing data between R/3 4.5B and R/3 4.7?
Thanks,
Gianluca

Hi,
Can I suggest a slightly more robust approach? What Andreas is suggesting, is that in fact you should be able to transfer the customising data by doing a standard transport. You can create a transport in your 4.5B system and then it can be physically copied (at the operating system level, for example FTP) to your 4.7 system and then imported.
I think that this is probably the right way to go, but you may have some troubles if the PS system has some changes in 4.7 (as the destination config tables may have different structures to the source tables).
The change I suggest from Andreas is start by using the IMG to generate the transport. If you go to every area of customising that you wish to transfer to the 4.7 system and make a change (save to a change request) then change it back and save, you will make sure that you have every table required to be transferred in your change request. You can then edit the change request (in SE09) and change the keys (by putting an *, rather than the specific data) to ensure you get all the data.
I just feel that given the complexity of configuration tables (and the sheer number of them) it would flow smoother if generated the initial list via the IMG, rather than trying to figure them all out yourself.
After the change request has all the correct entries you will need to release it (to ensure that the object in Unix has all the data from the SAP system). You can then FTP it to the 4.7 system and do an import of the change request (and cross your fingers that you don't get import errors due to config tables changing in 4.7).
Hope that helps,
Brad

Trigger a custom workflow from external system thru BAPI

Hi Friends,
I am trying to trigger a custom Workflow using BAPI from external system for Intra country transfer/.
Can you please suggest how do I do that .
Many Thanks.
Regards,
Rajesh

Start transaction SWETYPV and you will see the linkage between event and workflow.
In transaction SWUD you can simulate events to see whether the workflow starts without any errors.
In transaction SWELS you can start an event trace to see which events have been raised. Later on you can review this log using transaction SWEL.

How to Transfer Customizing Data from SAP ECC6 to SAP Solution Manager

Hi all,
I want to Transfer Customizing Data (such as organization structure) from SAP ECC6 to SAP Solution Manager.Please tell me how. Thanks.

Hi,
The system cannot capture the customizing data from your ECC6. This is another myth with SAP Solution Manager. Solution Manager can only smoothen the process of your Project Management.
Hope this solves your problem.
Feel free to revert back.
--Ragu

I'm unable to transfer iTunes Playlist to Sonos system.

I am unable to transfer an iTunes Playlist to my new SONOS system. The SONOS website gives instructions, but they don't work. Anybody having a similar issue?
Thanks,

Suresh14 wrote:
I wonder if I would loose my data (i.e., can't restore the data into my new phone), if I follow the uninstalling & re-installing steps.
Uninstalling & Re-installing iTunes will not delete your iTunes Library Data.
Do the following:
Uninstall from Windows the following four programs: iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour and Apple Application Support. You do this from an applet in Control Panel called Programs & Features (in Windows 8, 7, or Vista) or Add or Remove Programs (in Windows XP).
Download the latest version of iTunes from Apple and note the location you're saving it to so you can find it once it's done.
Run the iTunes installation as an administrator, just Right click iTunes installer and Run as Administrator.

How to transfer referenced masters from one harddrive to a new one

Hi,
I have about 1 TB of masters located on an external drive. I want to transfer these masters to a new 2 TB drive.
Even though I copied the masters to the new drive and renamend the volume just like the old one, Aperture is unable to locate the masters on the new external drive.
What's the trick? And no, I don't want to use the "relocate masters" or "locate referenced files ..." feature for these 10th of thounds of images.
Thank you.

And no, I don't want to use the "relocate masters" or "locate referenced files ..." feature for these 10th of thounds of images.
That is too bad , for "File > Relocate Original files" is the built in way to do it. You simply have to let Aperture move the files - how else should it keep track of the location of the original files?
Mount both drives.
Select all referenced images in the Browser at once, for example from the "Photos" view.
Use "File > Relocate originals" and select a folder on your new drive; set a subfolder format and naming format.
Now Aperture will move the originals and hopefully know afterwards were they have gone to.
If you absolutely must move the files on your own, you will have to go thrpough the painful procedure of reconnecting them to their original files, to point Aperture to the new location.
Regards
Léonie

Unable to Transfer Customer Masters from feeder system to GTS!

Similar Messages

Maybe you are looking for