Unable to transfer wma files on computer to 6280

I have the latest PC suite installed for my Nokia 6280 and when I get into music manager and try to transfer a wma file it comes up with the error message that the file cannot be ripped. Any suggestions to overcome problem?

How about browsing the phone from your PC (in the Bluetooth equivalent of "Mass Storage" mode), navigating to the folder where your music is located, and then dragging the file(s) to your desktop?

Similar Messages

HT204382 how can I transfer wma files to my mac?

how can I transfer wma files to my mac?

A Macintosh Classic (http://support.apple.com/kb/sp198) has a SCSI hard drive. Even though the hard drive can be removed and placed in an external SCSI enclosure, it is not going to be easy to find a way of connecting it to a modern Mac. That would normally require a USB-to-SCSI adapter, which may or may not be supported under the latest operating system versions.
The easiest method of transferring files from a Macintosh Classic may be via an external USB floppy drive connected to the modern Mac. 1.44 MB Mac-formatted floppy disks can be used for such transfers (not 800K).
A SCSI Zip (100) drive could in principle be connected to the SCSI port of the Macintosh Classic. The Zip disk could then be moved to a USB Zip (100) drive connected to a modern computer.
The Macintosh Classic does not have built-in Ethernet, nor a slot for an Ethernet card (certain other "classic" Macintosh computers do have the ability to hold an Ethernet card). There are some external solutions (such as SCSI-to-Ethernet adapters), but with limitations. For a networking overview, the http://www.applefool.com/se30/ web page could perhaps be of interest.
It is also possible to arrange a null-modem connection between a Macintosh Classic and a modern computer, providing that a USB-to-serial adapter is attached to the latter (appropriate terminal emulation programs are needed on both sides).
Jan

4GB Microphoto Doesn't transfer wma fil

Hey guys,
I have Creative Zen MicroPhoto 4GB (Version .20.0). My player was working prefectly fine until few days ago. I decided to organize all the music on my player, so I took out all the music from my player and added all nessasary album/artist info. But when I tried to put all the music back on it, it does not transfer ".wma" files? All the mp3 ones get transfered fine, but when I try to put in wma (btw, they are the same ones that used to be on it), it says "Class Not Registered". How do I resolve this issue... Please help!
Thanks for help in advance!Message Edited by ruler on 0-29-200708:9 AM

Come on... please answer someone!!

How to transfer midi files to computer then to ipod???????

Hi guys my dad is a musician and hes been using his midi player for years but would like to use an ipod instead. However how would he transfer his midi files to his computer. He says its impossible but i told him there had to be a way. All his midi files are on midi disks and he says that he can only transfer midi from the computer to the device not the other way around. Please if anyone knows the answer to this, help me out. thanks

This article lists allowed formats
http://docs.info.apple.com/article.html?artnum=61476
You are going to have to find some program that converts to files from midi, whatever that is, to something else. Try Audacity, it might do it.

Unable to transfer large files from MB to External HDs

Hi,
This may be an unusual one. My 1st edition Macbook won't let me transfer large files to my external hard-drives, either by USB, Ethernet or wirelessly through my home wi-fi network.
I've started video editing so I'm importing DVcam tapes through firewire from the camera. A full DV tape translates to about 8-12gb I think.
Using iMovie and saving the import to my Freecom 3.5inch network harddrive vis USB or ethernet, it fails saying 'Unexpected error, error code 1309'.
When I try quicktime pro instead to import the tape to the external HD, I get 'Operation could not be completed, An attempt to add a resource to the file failed'. This happens too with my WD 2.5inch external drive.
However, there is no such problem when I import to the MB's internal harddrive. When I then try and shift the large file off the laptop to an external drive, via USB, ethernet of wirelessly, for editing and save keeping, it fails half way through.
I have the same problem when I try back-up my 17gb virtual windows machine I use with VMware fusion off the laptop to an external drive.
I am currently burning an 18gb iMovie project from the MB's internal HD, over 5 DVDs using Toast's disc-spanning and will reimport them to the external, which is really time consuming.
Also to note, Final Cut Express doesn't have these problems as it seems to break up what would be an 18gb movie file into several smaller files, which my MB is quiet happy to let go onto an external drive. However, the problem re-emerges on Final Cut Ex when I try and import a HDV tape. Possibly FCE isn't breaking them up into small enough pieces for my MB to handle?
Any ideas why this is happening and what I can do to fix it? Or does this mean a new laptop?

Irish Apple Fan wrote:
Hi,
This may be an unusual one. My 1st edition Macbook won't let me transfer large files to my external hard-drives, either by USB, Ethernet or wirelessly through my home wi-fi network.
I've started video editing so I'm importing DVcam tapes through firewire from the camera. A full DV tape translates to about 8-12gb I think.
Using iMovie and saving the import to my Freecom 3.5inch network harddrive vis USB or ethernet, it fails saying 'Unexpected error, error code 1309'.
When I try quicktime pro instead to import the tape to the external HD, I get 'Operation could not be completed, An attempt to add a resource to the file failed'. This happens too with my WD 2.5inch external drive.
I'm a bit late to the party, but specifically there's a 4GB file size limit in the FAT32 format that is standard on many external hard drives. I've run across this problem before, and usually it copies over most of the file and then quits when it reaches the limit.

Unable to locate downloaded file on computer ecobutton.exe.

Hi.
I recently purchased an ecobutton program (which is an .exe file) Following download which was supposedly successful I am unable to locate the file.
Any help would be welcome
Thank you

Yup...I also have the same problem with you...Can anyone of you can solve the problem?

HT1386 Unable to transfer iTunes file/folder on my iPod (Classic) to my new computer.

I am trying to transfer my iTunes music to a new Windows computer from my iPod (Classic) but I am unable to see my iTunes file/folder on my iPod when connected to my new computer.

I managed to recover my music from my iPod Classic (formatted F00, F01, F02, etc......F49), but I am unable to get iTunes to recognize any of it. It keeps defaulting to a previous old iTunes library and trying to locate those songs.
How can I get it to recognizewhat I would like to be my new!!! iTunes library (off my iPod)?

Can't Transfer WMA file to Creative Zen Plus

Can anyone help? I've checked out and downloaded a wma from from Net Library. The file plays on my computer in Windows Media Player 0, but when I try to transfer it to my Zen Plus, I get an error.
Thanks,
Kathy

First, I assume you are talking about a Zen V Plus 4GB, as there isn't a Zen Plus, as far as I know. I would go back and check NetLibrary for computer and player requirements. Is this a "renew your license for 2 days"(No download, only license to play ) If so, it won't let you redownload the audiobook.
I have found NetLibrary to be very difficult for using with MP3 Players. Make sure that Windows Media Player has downloaded the license and then shut it off. I go to the folder where I store my NetLibrary audiobooks and make sure my player is plugged in and the computer recognizes it. Highlight my chosen audiobook, Then right click, and choose Copy to Creative Zen V Plus, media library. It should download from there. It is a much easier method than trying to use WMP 0/ for the download.
Hope this helps a little.
luvmyrescuedogs

Unable to transfer Kindle files onto my Ipod Touch

The files are in my Kindle on my computer but they will not transfer over to the Ipod Touch. How do I get the files moved over to the Ipod Touch from my pc?

Are the Kindle purchases?
Just what happens when you try to redownload via the Kindle app on the iPod?
Deliver to Kindle for iPhone, iPad, and iPod touch
Deliver books, periodicals, and personal documents to your Kindle reading app fromManage Your Content and Devices.
To successfully deliver Kindle content, the Kindle reading app must be registered to the same Amazon account you use to purchase Kindle content.
After you buy a Kindle book, Audible audiobook, magazine, or newspaper, the title is saved to the Cloud and can be accessed from Manage Your Content and Devices. New purchases are sent to your reading app and appear under the Cloud tab.
From your computer:
Visit Manage Your Content and Devices
Select Your Content.
Select the title and then click Deliver.
On the pop-up window, select the device or app from the drop-down menu.
Select Deliver. Your content will automatically be delivered to your device or reading app once its connected to a wireless network.
From the Kindle reading app Home screen, tap the Device tab to view and open the title.
Related Help Topics
http://www.amazon.co.uk/gp/help/customer/display.html?nodeId=201244880

Unable to transfer Video files from iPhone to iPhoto

My daughter's iPhone 5S was stolen and she transferred her 2500+ picture camera roll to her brother's iPhone 4. Then her laptop died and was transferred to a brand new MAC. Upon syncing, backing up and restoring her iphone 4 I am finding that I repeatedly get the message. I have erased and restored her iPhone 3X.
"Error downloading image. iPhoto cannot import your photos because there was a problem downloading an image"
Now I was thinking the library was damaged, but have rebuilt it 2X. I then imported individual pictures and they went in fine.
Now what I did notice is that there are 7 small video clips each about 4-10 seconds long that are NOT importing. In fact, in iPhoto they show up as MOV and do not even show a preview video so I can't tell which videos they are other than by the length of the video. Sadly with over 2500 files there are many short video clips so I don't know which one's for sure she is unable to get without searching the #@)*^&%)!&^!!!! iPhoto library and comparing them one by one to see which ones are there.
I also tried importing the video files to a brand new library on the same computer and got the same error.
The same appears to happen going to a brand new library on a DIFFERENT computer. So I'm pretty sure the problem is with those 7 video files.
Does anyone have any suggestions for how to find and remove this 7 short clips and salvage them for her? I suppose she could email them to herself.
Thanks

Sorry, I can see I wasn't clear. The video files are on the iPhone and I'm guessing they are corrupt. I've read a number of your forums on checking to see if the problem is with the iPhoto library, but in this case I don't believe that to be true because:
1. It fails when I create a new library on the same computer.
2. It fails when I create and attempt to sync on a DIFFERENT computer with which I created a brand new iPhoto library.
3. These files (7 of them) actually look different on iPhoto and DO NOT have the preview icon that shows you what it is. They simply say .mov or something like that.

WEBUTIL_FILE_TRANSFER.URL_To_Client unable to transfer desired file from DB

Hi all,
I need to transfer files from DB server to web client using WEBUTIL_FILE_TRANSFER.URL_To_Client, the problem is whenever i try to transfer i get base.htm file contents into the requested file. i.e. i do not get the desired file transfered intead it creates a file with the name specified but it has the text from base.htm.
Anybody with the solution???
Am using developer 9i R2 with DB 10g.
Here is the code:
DECLARE
V_FILE VARCHAR2(30) := 'temp2.txt';
CLIENT_FILE VARCHAR2(150);
SERVER_FILE VARCHAR2(150);
BLNRET BOOLEAN;
BEGIN
CLIENT_FILE := 'd:\'||V_FILE;
SERVER_FILE := '/ftp/download/'|| V_FILE;--An OS directory on DB server
BLNRET := WEBUTIL_FILE_TRANSFER.URL_To_Client(SERVER_FILE, CLIENT_FILE);
END;

Hi,
I solved that pbm using webutil_clientinfo.get_ip_address mtd. but no clues abt port number.
Transfer of a file [webutil_file_transfer.url_to_client] is not working in clients. It is working properly in server machine, In client pc, it is throwing WUC-24 unable to read URL error message.
Any clues?
Regards
Priya

Unable to transfer ringtones from one computer to another

Just bought one ringtone today, put it on the iphone, brought iphone home, try to tranfer it to the computer as well as other bought songs but the ringtone didn't transfer, what do I do now???

You will need to phyically copy the file from your one pc to the other. Then drag it into iTunes (drop it on the rigntone menu).
Then try to play it in iTunes (it will ask to enter login info to authorize it).
Then from there it is on that machine ready to go.
I belive the location it saved the file is
C:\Documents and Settings\YourLoginName\My Documents\My Music\iTunes\Ringtones
I would put it in the same location (editing login name part of the path of course) before dragging it into iTunes.
Message was edited by: DaVBMan

Unable to transfer adobe file into reader to send

Any suggestions
I drag a file to Adobe Reader and get the following window "Adobe Reader could not open 'seventh council.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)." It seems to do with every single file on my computer.

Thanks for that quick response. I think I have finally cracked it by dint of trying everything on the menu.
If I go to file - export it transfers it into a PDF file which I hope to able to send as an email attachment.
David

How to transfer music files from computer to phone

how do I add music files from my ITunes on computer to L2G2 android phone? Do I need an app or can I use the music player installed?

Worked great!
Thank you,
>> Personal information removed to comply with the Verizon Wireless Terms of Service <<
Message was edited by: Verizon Moderator

I am unable to transfer flac files to my iPhone 4.

I purchased an iPhone app that will allow my to play flac music files. However, iTunes will not transfer my flac files to my iPhone 4. Any suggestions?

Dr C Guerra,
There are a number of iPhone and iPad apps that claim to play FLAC files. However, given the overall lack of FLAC support in iTunes and iOS, you better anticipate that you are in for an uphill fight.
I suggest that you use a conversion program to make AAC or Apple Lossless versions of your FLAC files for use on your iPhone, and keep the FLAC files on hand for future pruposes.

Unable to transfer wma files on computer to 6280

Similar Messages

Maybe you are looking for